Upload
others
View
8
Download
0
Embed Size (px)
Citation preview
Yokogawa Corporation of America2 Dart Road Newnan, Georgia U.S.A. 30265Tel: 1 8008886400 Fax: 17702540928
GS 1C22-AGC-02©Copyright Aug. 2005
2nd Edition
GeneralSpecifications
GS 1C22-AGC-02
M4T3-Valve Manifolds forDifferential Pressure
■ INTRODUCTION
The M4 three-valve manifolds weredesigned for mounting on differentialpressure transmitters having 2 1/8”center-to-center connections.
The M4T directly mounts to thetransmitter, replacing the processconnectors by providing 1/2” NPTprocess connections. M4A manifoldsare also available and provide aflange face for the processconnectors to be mounted.
Three-valves manifolds are the most commonlyused manifolds. The equalization valve allows thetransmitter to be pressurized with line or vesselpressure before differential pressure is applied forflow or level measurement.
■ FEATURES
• Pipestand Mounting
The optional mounting bracket allows the manifold
to be mounted prior to the installation of the
transmitter and easily removed when necessary.
• Stem Back-Out Prevention
This eliminates stem blowout, or accidental
removal while in operation
• Rolled Stem Threads
Unlike cut threads, rolled stem threads have more
strength and longer life.
• Field replaceable Soft Seals
The seat insert can be replaced without removing
the valve from the line.
• Integral Hard Back Seats
Hard back seats protect against stem blowout and
form a secondary seal.
2
All rights reserved. Copyright © 2005, Yokogawa Electric Corporation. Subject to change without notice. GS 1C22-AGC-02 August 2005
■ DIFFERENTIAL PRESSURE MANIFOLDS - M4T SPECIFICATIONS
■ NOTES
1. Approximate valve weight: 4.5 lb. [2.0 kg].
Metal seat
0.156-inch [4.0 mm] diameter orifice.
Valve Cv 0.36 maximum.
Soft seat
0.187-inch [4.8 mm] diameter orifice.
Valve Cv 0.83 maximum.
3
■ M4T SPECIFICATIONS
STANDARD MATERIALS
• METAL SEAT
VALVE BODY1 BONNET STEM BALL
SS A479-316 A479-316 A276-316 316 SS
SG2 A479-316 A479-316 Monel® 400 Monel K500
• SOFT SEAT
VALVE BODY BONNET STEM SEAT
SS A479-316 A479-316 A276-316 Delrin®
SG2 A479-316 A479-316 Monel 400 Delrin
SG33 Hastelloy® C276 Hastelloy C276 Hastelloy C276 Delrin
■ PRESSURE AND TEMPERATURE RATINGS
• METAL SEAT
VALVE PACKING RATINGS5
SS Teflon® 6000 psig @ 200°F [414 barg @ 93°C]4000 psig @ 500°F [276 barg @ 260°C]
SS Graphite 6000 psig @ 200°F [414 barg @ 93°C]GRAFOIL® 1500 psig @ 1000°F [103 barg @ 538°C]
SG2 or Teflon 6000 psig @ 200°F [414 barg @ 93°C]SG33 4000 psig @ 500°F [276 barg @ 260°C]
SG2 or GRAFOIL 6000 psig @ 200°F [414 barg @ 93°C]SG33 1500 psig @ 1000°F [103 barg @ 538°C]
• SOFT SEAT
VALVE PACKING RATINGS5
SS Viton® O-ring with 6000 psig @ 200°F [414 barg @93°C]Teflon back up ring
SG2 Teflon 6000 psig @ 200°F [414 barg @93°C]SG33
■ NOTES
1. Instrument mounting kit furnished with the M4 includes (4) A193-B7 bolts and (2) Rulon - Ceramicor GRAFOIL flange gaskets to match bonnet packing.2. SG (Sour Gas) meets the of NACE MR-01-75 (2002) and NACE MR0103-20033. SG3 (Sour Gas) meets the requirements of NACE MR-01-75 (2003)4. 316 SS bolts lower pressure ratings to a maximum of 4500 psi [310 barg]. Consult factory for fullrating with 316 SS bolts.
All rights reserved. Copyright © 2005, Yokogawa Electric Corporation. Subject to change without notice. GS 1C22-AGC-02 August 2005
4
All rights reserved. Copyright © 2005, Yokogawa Electric Corporation. Subject to change without notice. GS 1C22-AGC-02 August 2005
Notes
Accessories
1. 316 SS bolts lo
M1244AS-A Stainless steel bracket.
M1244BK-01 Rulon - Ceramic gasket.
M1244BK-02 Grafoil gasket.
wer pressure ratings to amaximum of 4500 psi [310 barg]. Consultfactory for full rating with 316 SS bolts.
M4T V I S – 4 – T – SG
Valve Type
Bonnet Packing
V – Teflon!
Seat
I – Integral (body material)
Body Material
S – SS, A479-316
Process Connections
Always
4 – 1/2-inch FNPT
-T - Transmitter Gasket ( ID: 0.87")
Options
Ordering Information – Metal Seat
–AM Carbon steel mounting bracket.
–OC Cleaned for Oxygen Service.
–SG Sour Gas meets the requirements of NACE MR0175-2002.and NACE MR0103-2003. Monel trim.(SS valves only) (not available for O-ring packed valves)
–SG3 Sour Gas meets the requirements of NACE MR0175-2003.Requires Body Material J(Hastelloy C trim).
–TAPT Torqued attachment and pressure test.
–ATCH Attached to transmitter hand tight.
–AMS Stainless steel mounting bracket.
–SSC1 316 Flange Bolt (B8M) - Maximum pressure rating 4500 psi [310 barg]
–TB Test Ports - Bottom of Manifold (1/4-inch FNPT)
M4T – 3-Valve Manifold, FNPT x Flange
J – Hastelloy C-276
■ M4T SPECIFICATIONS
5
All rights reserved. Copyright © 2005, Yokogawa Electric Corporation. Subject to change without notice. GS 1C22-AGC-02 August 2005
Trademarks
Teflon, Delrin are registered trademarks of Dupont, Hastelloy C is a registered trademark of Haynes
International, Monel is a registered trademark of INCO Alloys/Special Metals.
■ M4THP B31.1 AND B31.3 MEETS MSS-SP-105
M1244AS-A Stainless steel bracket.M1244BK-01 Rulon - Ceramic GasketM1244BK-02 Grafoil Gasket
S – 4 – T
Always-T - Transmitter Gasket ( ID: 0.87")
x Flange x 1/4-inch FNPT