General Introduction. ABOUT US Company founded September 2014 with the following owners: AMV AS JL...
26
General Introduction
General Introduction. ABOUT US Company founded September 2014 with the following owners: AMV AS JL Offshore AS RVD AS Share capital – 2.000.000 NOK Our
ABOUT US Company founded September 2014 with the following
owners: AMV AS JL Offshore AS RVD AS Share capital 2.000.000 NOK
Our strategy is to join common strengths in order to be the
preferred and flexible provider to the oil & gas industry. We
see a strategic fit with our flexibility, competence and business
model related to the ongoing processes within the Oil & Gas
industry
Slide 3
ABOUT US Kjell Rune Heia Managing Director Johnny Lland
Marketing Manager Tom John Versland CFO Peter Heinrichs Technical
Advisor Marianne Hartveit QA Kjell Rune Heia Engineering Manager
Terje Heia Cristian Sousa Technical Supervisor Raquel Rodrigues Jan
Prstholm HMI /Software Arnfinn Rysstad Osmund Faremo Engineers
Mechatronics Board of directors: Peder Andersen, Chairman Per
Gunnar Andersen Johnny Lland Roy Le Kjell Rune Heia Terje Heia
Slide 4
AMV AS -Privately owned company since 1860 -Main products
within tunnel/mining industry and offshore industry - Yearly
turnover 330.000.000 NOK Norway / South America - No. of employees
150 in Norway / 40 in South America -40% of production is export
for tunneling / mining - 13000m of modern production facilities -
Our capabilities -Engineering department -Machining shop -Welding
and fabrication shop -Assembly shop -Electrical shop -Painting and
sandblasting facilities -Warehouse and shipping
Slide 5
AMV A/S Offshore AMV has been manufacturing, developing and
refurbishing advanced oil and gas industry equipment for 40 years.
Focusing on products like derrick drilling machines, top drives,
hydraulic power packs, drill floor manipulators, racker arms,
roughnecks, injectors and access baskets, AMV has a proven track
record of quality and solid craftsmanship. Service companies have
trusted us for close to 40 years, and keep coming back for more AMV
AS are recognized to be one of Aker Solutions MH top ten
suppliers
Slide 6
AMV PORTFOLIO ROUGHNECK SLIPS TOPDRIVES SPARE PARTS MUDPUMPS
PROJECTS
Slide 7
AMV REFERENCES Transocean Searcher - Cherry Picker Moonpool YME
Platform Talisman - Cherry Picker 14m - Assembly crane -
Manipulator crane for roughneck - Skidding system Aker Solutions MH
- Topdrives - PTDs - Hydraulic power packs - Cherry Pickers -
Roughneck - Development 1000, 1250 & 1500 Tonne Topdrive -
Various development assignments Weatherford Rig Systems - Roughneck
- Slips Cameron Sense - Development / production Topdrive Stimline
- Development well intervention system Optipump - Development /
fabrication mudpumps
Slide 8
JL OFFSHORE AS - Company founded in 2000 - 4 Employees - Yearly
turnover at approx 106 mill NOK (12) - All together been involved
in the oilfield supply business for almost 70 years - JL Offshore
is Exclusive representative for WOM (Worldwide Oilfield Machine) in
Norway - JL Offshore is representative for Forum Energy
Technologies in Norway - JL Offshore is Exclusive representative
for Bronco Mfg in Norway
Slide 9
JL OFFSHORE AS Services JL Offshore can provide Service
Personnel and Spare Parts for Mud Pumps, Drawworks etc. made by
other manufacturers. Products - Mud Pump Parts- Bearings - Roller
Chain- Sheaves - Subs (x-over, saver etc.)- Kelly Valves - Inside
BOPs & Dart Sub - Plug Valves - Ball Valves- BF Valves -
Handling Tools - Fishing Tools - Brake Blocks- Clutches - Filters-
Drawwork - General Supply of Drilling Related Equipment /
Spares
RVD AS The company was founded in 2012 and has been delivering
consultant services to different project within rig upgrade (SPS)
on several different projects within. PLC programming Engineering
of new control system Citect Scada HMI programming Installation
lead on site Commissioning management and execution Prior to
founding RVD (Kjell Rune Heia) that is the owner has 13 years
experience from Aker MH in; Mechanical repair and overhaul
Hydraulic installation and trouble shooting PLC control system
startup, commissioning and trouble shooting Holds IADC certificate
as subsea engineer And has in total 20 years experience from
offshore drilling industry.
Slide 12
RVD REFERENCES Apply Rig & Modules: Maersk Guardian
Engineering leader and PLC Programming for PRS pipehandling system
Maersk Giant Engineering leader and HMI Development and PLC
Programming for PRS pipe handling system Maersk Gallant Engineering
leader, HMI Development and commissioning execution. These projects
have involved change out of control system for the drilling system
including system design. Tratec Offshore Solutions: Maersk
Resillient/Maersk Resolve Installation supervision of overhauled
drilling package, and commissioning responsible of installed
equipment.
Slide 13
HOW WE WORK -Engineering -Software development -Engineering
assistance to AMV -Fabrication -Engineering -Offshore installation
/ Commissioning -Overhaul and modifications -Spare parts and
logistics -Survey -Technical specifications assistance. Early
project phase -Concept studies -Special products / modifications
-Market know how Our added value is the combination of strengths
from each partner
Slide 14
WHAT WE DO Overhaul of Drilling equipment Through the
experience within the service range of our companies, we will be
able to supply in-house solutions in all chain of the process.
Dismantle of equipment and installation after overhaul Sand
blasting, NDT and inspection of equipment Repair and machining of
equipment if needed in overhaul We have in-house welding engineer
that can service welding procedures for repair of cracks or damage
We are certified for certification of lifting equipment Re-assembly
and work shop testing Commissioning of installed overhauled
equipment Offshore solution for overhaul is part of our strategy
and will be set up in each individual case The personnel at Skild
AS holds long experience in both offshore and onshore services
within all sides of a SPS within Hydraulic, mechanical and
electrical part of the scope. Skild will hold in-house competence
for the key roles in these kind of project and will use
sub-contractors from local partners lead by Skild supervisors when
possible This will benefit our customer because use of local work
force will be saving travel/lodging cost, and will normally be a
cheaper solution where Skild will only charge the cost plus and
administrative cost for the local work force.
Slide 15
WHAT WE DO Tailor made solutions in order to perform more MMO
work offshore or on-site Skild offer solutions to perform overhaul
both offshore and on shore This will give a flexibility for the
customer where we will be able to set up different kind of
container or special tool solutions for the job. Service Works shop
containers Hydraulic containers for hoses and piping Electrical
containers for electrical parts and modification Test unit
containers for hydraulic units for test of equipment Test
containers for VFD, PLC control for full range test in local
workshop Special designed lifting equipment Or other special
request that customer may have
Slide 16
WHAT WE DO Rig survey Skild can assist in project planning and
rig survey to plan and specify a job that the customer may request.
Define scope of work to be performed Define and plan how to execute
a job Define if any special requirements are needed or should be
considered to save time Find solutions for request from rig in
cooperation with rig crew and shore base organization Plan and
design replacement equipment if overhaul or repair is not a
preferred solution
Slide 17
WHAT WE DO Spare part and storage Skild can offer spare parts
trough JL Offshore product range Skild can offer to supply spare
part or fabricate replacement where the customer want this We can
also offer to store and maintain equipment where the customer has
need for longer Storage of different equipment.
Slide 18
WHAT WE DO Control system upgrade and E&I services Trough
in-house competence in Skild we can offer to do replacement of
control system where the customer need to upgrade due to different
reasons. We will then deliver system based on agreed functional
description with customer regardless of OEM Prior to building the
control software a system need to be specified with: Functional
description Cause and effect for the different machines Approval
from authority (DNV, Lloyds etc.) We have long experience in
control system development, implementation and commissioning.
Further strengthen of this will be done in sub-service from AMV. We
can deliver tailor solution where the customer are part of the
design team and get the best solution for each case
Slide 19
WHAT WE DO Tailor solution and special equipment from Skild We
believe that trough our experience and with input from customer we
will be able to come up with good solutions for any challenge that
there may be in the operation of a rig. This will be a challenge
that will be solved and planned in cooperation with the customer.
We believe that the best solution is found based on a common effort
where modification are requested.
Slide 20
In Center Improved tripping efficiency stab and dope function
keep personnel out of red zone In Center Improved tripping
efficiency stab and dope function keep personnel out of red zone -
Ensure stabile stabbing of single and stand in WC increasing
productivity on the rig - Full pipe range for Roughneck - Retrofit
for Aker MH / NOV roughneck - Dope / Wash function keep the RFO out
of red zone - Removes personnel from red zone - No integration
towards existing control system - Patented technology
Slide 21
In Center - Dope / Wash function Showing dope of pin end in
same operation as centering of pipe This minimize time for doping,
and ensure that the RFO dont have to enter the red zone for doping
while tripping in hole.
Slide 22
In Center Operation Animation
Slide 23
In Center Dimensions The In Center is a fully hydraulic
integrated Machine, no need for control system upgrade. This give a
flexible solution regardless of control System installed.
Slide 24
Well Intervention Pump Constant speed eliminates need for
costly speed control device, clutches, multiple stage gearboxes
etc. Patented Technology Small footprint Variable stroke, 0-100%,
step less while pump are running for accurate volume/pressure/Flow
control Soft start, no shock load on piping and well equipment. PLC
controlled. Able to run at constant pressure, constant flow or
fixed volume. Perfect for MPD and pressure testing.
Slide 25
Well Intervention Pump Plunger Size (In)Max Flow l/minMax
Pressure (Bar) 4,51075150 4850200 3,5480350 Wide flow/pressure
range for each plunger size. No need to replace fluid end body when
changing plunger size
Slide 26
SKILD lift arm Skild can deliver special arrangement for
personal lift. Here is one example for how we can design a basket
for use where the operator need to get access on different sides or
positions of equipment or location. This kind of basket reduces the
need for use of riding belt or climbers and ensure that the
operator can gain safe access to working place.