GENERAL CATALOGUE - · PDF fileFDI MATELEC 1 GENERAL CATALOGUE Designer and manufacturer of access control products since 1989, FDI MATELEC controls all its projects from conception

CONTROLLERSPROXIMITY READERSRF RECEIVERSPROXIMITY KEYS AND CARDSDUAL-TECHNOLOGY REMOTE CONTROLSKEYPADSENTRY PANELSSOFTWARESACCESSORIES

G E N E R A L C A T A L O G U E

FDI MATELEC

1


Designer and manufacturer of access control products since 1989, FDI MATELEC controls all its projects from conception to production.

Key player in residential and industrial access control applications, thanks to the use of up-to-date technology and highly skilled people, FDI MATELEC offers a range of products adapted to each project, from dedicated solutions to small single-site installations as well as large multi-site networks.

The company is a subsidiary of Urmet France Captiv since 2000 (Urmet group Italy).

FDI MATELEC is part of the group of professionals at the initiative of Vigik label and its products are approved.Its entry panels are DDA compliant as well.

From its site of 2500 sqm based in Vendée (West part of France), FDI MATELEC has been exporting its products worldwide since 2004.From its site of 2500 sqqm based in Vendée (West pap rt of France),, FDI MATELEC has been expop rtingg its prp oducts worldwide sisisisincnccceeee 20202020200004040404040404.

2/3

FDI MATELEC services

FDI design, technical and Test department

To be at the cutting edge of innovation, FDI MATELEC invests each year in its design and technical department.The result is a team of 20 technicians and engineers divided into 3 skills areas : • the hardware department developping the electronic boards,• the embedded software department that creates the management applications of the electronic boards,• the PC department developping softwares that will be the interface between the user and the hardware.

-cated to research and innovation. All developments include a comprehensive study to reduce the product’s impact on the environment throughout its life cycle. The products are designed to facilitate and simplify the ergonomic use by clients (installer, user ...).

Finally, to ensure the best performance, a team of 4 technicians, separated from the design and technical department, is dedicated to the validation of new products or main changes. Each element must successfully pass the functional test plans to validate its full operation and reliability for com-mercialization (controller, software ...).


FDI : CUSTOMERS AT THE HEART OF OUR CONCERNS

FDI’s production

A team of 35 persons works in FDIs production factory of 2500 sqm.

The site is equipped with high-technology machines :• 1 soldering paste print machine DEK ELA Horizon,• 1chip shooter MYDATA MY100DX latest generation of 32 000 components per hour,• 1 SOLTEC soldering oven 8 zones for soldering and polymerization of glue,• 1 automatic optical inspection machine ISP (automatic optical control of components by comparing image)• 1 3D X-ray inspection machine (for the control of BGA)

• 2 milling machines for machining and etching of plastics, aluminum and brass,

• Multiple assembly areas with adjustable torque screwdrivers.

The entire installation allows a capacity up to boxes of 0.1 mm sized on 0.05mm BGA 0.4mm pitch, the measuring value of discrete components, video analysis, traceability of components on the boards and automated tests.

FDI MATELEC’s manufacturing process is consistent with the ROHS Directive regarding the elimination of lead into tin solder.

This way, FDI MATELEC can produce more than 1.2 million RFID keys and HF remote, 26000 controllers, 44000 HF readers and RFID receivers and more than 8000 intercom panels per year.

4/5

Quality FDI

The actions focused initially on product quality, FDI then extended its objectives to a system of quality management of all its activities based on the principle of continuous improvement.

The customer is the center of FDI’s organization and all actions aim at maintaining a maximum level of satisfaction. Minimizing the risk for the client is part of daily decisions. It requires the involvement of all employees, every one being responsible for the quality of his function.

united around a common project.FDI is located in a rural area and therefore sensitive to its impact on the environment. In order to achieve this, FDI indeed commits itself in a willingness based on ISO 14001.

-ous improvement:• Find solutions to adapt modes of operation to our environment and to meet customer expectations,• Develop commercial offer according to the rules “clean products”• Reduce the impact of the company on its immediate environment.

FDI : Founder member of the recycling branch DEEE Pro.


SUMMARY

FDI Matelec 1

Choosing your access control... 6

Read and write management 26

Standalone management 8

On line management 40

Accessories 56

Panels 78

Pan

els

Acc

esso

ries

On

line

Rea

d an

d w

rite

Stan

dalo

neKeypads 10 Easy Door Controller - Ciprox 12Transit 16Vitwo LS 22

Easy Door Controller - Ciprox 28Vitwo LE 34

Passan 42Transit IP 52

Readers and receivers 58Proximity keys, ISO cards and remote controls 68Buttons, electromagnetic locks 74

PSTN panels 80Push button panels 82

To ensure continued improvement, FDI Matelec reserves the right to make any changes considered useful.For any technical precision, do not hesitate to contact us.

Non contractual pictures.

What is the access control ?

Access control allows or refuses the access to a person or group of people in order to improve the safety of a building.When a key is presented to the reader, the reader sends the information (usually a serial number) to a controller.The controller compares the received information with its data, allows or refuses the access and sends information to its database.When access is refused, the door remains closed. When access is granted, the controller activates a relay that opens the door.

Why using electronic access control ?

In the case of a conventional lock, when a key is lost, you must replace the cylinder lock plus any other key to ensure that no unau-

in the controller and the lost or stolen key becomes inactive.Secondly, electronic keys cannot be copied. Safety is increased.

3 POSSIBILITIES TO MANAGE YOUR ACCESS CONTROL :

. Standalone managementStandalone management is carried out on site.It means being physically near the keypad or the controller to program it. This type of management is preferred when the system requires few intervention or when a person is present on site and able to make these changes, a caretaker for instance.A keypad is programmed by a master code and does not require to be disassembled to be set. The programmed secret code can have from 3 to 8 terms and can be changed as often as desired by using the master code. The keypad is the simplest and most economic access control solution.Programming a standalone controller does not need any tool whereas a controller requires a central programming terminal or a software installed on a computer. It has at least a programming mean (switch and/or master key) and has often a keypad and a display.

Please note, a controller can be either a standalone controller either not. For example, it can work with a standalone management for a simple management, but may require a software to offer more opportunities. Generally, keypads and standalone controllers are preferred for small installations. In traditional access systems, each electronic key has a unique electronic serial number allowed or not into controllers. This is called read-only.

6/7

CHOOSING YOUR ACCESS CONTROL...

Standalone management

I3 VANDAL RESISTANT KEYPAD Doors : 2Up to 22 codes

MULLION KEYPADDoors : 2 Up to 22 codes

A4 KEYPADDoors : 2 Up to 22 codes

TRANSIT 125KHzDoors : 2 Users : 999

EASY DOOR CONTROLLERDoor : 1Users : 1500

VITWO RO 13.56MHzDoors : 4 Users : 5000

K-PADDoors : maximum 4Up to 100 codes


. Read and write managementRead and write management is performed off-site.This technology enables remote management while providing more opportunities than standalone management settings. The manager can manage its badges from home without moving to the controller.In read and write management permissions are stored in the key. Keys have therefore a large memory to store these per-

The software can be installed on a PC or be a web-based software accessible from anywhere with a login and password.When a key is presented to a reader, the controller read permissions inside the key, authorizes it or not, and updates its own memory. It is no longer necessary to go to the site to add a key, and a key can also be removed from a controller to prevent

. On line managementWe talk about on line management when programming keys is performed offsite in real time.From one place, the user manages access to an unlimited number of buildings, connecting to sites via modem or TCP/IP.As soon as the user enters new settings in his software, controllers are updated. Controllers are able to pull up information on the computer in real time. For example, a door kept open will activate a popup on the PC screen.

Read and write management

On line management

EASY DOOR CONTROLLERDoor : 1 Users : 2000

VITWO RW 13.56MHzDoors : 4 Users : 5000

PASSANPREMIUMDoors : 6 to 192Users : 2700

TRANSIT IPDoors : 2Users : 5000

Pan

els

Acc

esso

ries

On

line

Rea

d an

d w

rite

Stan

dalo

neP

anel

s A

cces

sori

esO

n lin

eR

ead

and

wri

teSt

anda

lone

8/9


EASY PROGRAMMING ON THE PRODUCT AND WITHOUT ANY TOOLS.COST EFFECTIVE SOLUTION FOR A SIMPLE ACCESS CONTROL.

ST

AN

DA

LO

NE

MA

NA

GE

ME

NT St

anda

lone

Stan

dalo

ne

10/11

FDI KEYPADS

Wiring diagram

- Electronic 22 resident codes of 3 to 8 digits

- 1 to 4 door relays NO / NC

- Lock release time : from 1 to 99 seconds

- 1 Master code

- Backlights available

- Operating temperature : -10°C to + 70°C

2 wires

2 wires

2 wires

FDI keypads allows the opening of one or several doors for residents.

The door opening is performed by dialing a secret code from 3 to 8 digits.

Programming is done directly on the keypad by master code without removing the front cover.

FDI keypads are simple to wire:two wires to connect to the lock, two wires to connect to the power supply and two wires to connect to the push button.

FDI keypads are ideal and suitable for any type of property for the control of 1 or 2 doors.


FD-060-118 SURFACE MOUNT KPAD 2 RELAYS (8A and 1A)Keypad especially designed for automation applications(alarms, gates...)Dimensions : 105mmx40mmx80mm - Material : polycarbonate housing.Capacity : 100 user codes.Codes from 3 to 8 digits.3 leds : yellow (for the keypad), green and red (status leds), buzzer.Lock release time : 1 to 99 seconds (monostable or bistable)Programming by master code.Keypad with blue backlights.Push to exit input.Tamper.Clock input for time management.Power supply : 12-24 Vac/Vdc.IP65 rated.Operating temperature : -20° to +60°.

Exist in 1 RELAY 8A part number. FD-060-117Exist in 4 RELAYS 1A part number. FD-060-119

FD-060-164 I3 STAINLESS STEEL KEYPAD WITH BACKLIGHTSDimensions (L x H x D) : 135mmx100mmx43mm.Flush mounted. Stainless steel front plate 2,5mm thick.Programming through the front frame via a master code.2 dry contacts and 1 exit collector open.Wide Braille buttons with backlights diam. 16mm, blue leds.Removable terminal connections, led and operating buzzer.Rain hood to adapt it in surface mount keypad in option (part number : 60-030-277).Power supply : 12Vac or 12Vdc.

FD-060-077 VANDAL RESISTANT KEYPADFD-060-078 VANDAL RESISTANT KEYPAD WITH BLUE BACKLIGHTSDimensions (L x H x D) : 134mmx80mmx33mm.One piece aluminum injected front cover to improve vandal resistance.2 door relays NO/NC + 1 entrance push button + 1 tamper.IP55 rated.Removable terminal connections, led and operating buzzer.Fixing by bidden vandal resistant screw (tool supplied), sealing gasket supplied.Power supply : 12-24 Vac or Vdc.

FD-060-050 A4 KEYPAD ALUMINIUM ANODIZEDFD-060-053 A4 KEYPAD ALUMINIUM GOLD ANODIZEDFD-060-056 A4 KEYPAD STAINLESS STEELDimensions (L x H) : 104mmx215mm.Dimensions embedded box (L x H x D): 75mmx185mmx40mm.2 door relays NO/NC + anti-vibration control.IP66 rated.Removable terminal connections, led and operating buzzer.Backlit buttons blue leds high brigthness.Power supply : 12Vac or 12Vdc.

2 wires

2 wires - green led

2 wires - red led

Alarm

Available under

blister pack GB-060-118

in metal grey color

and FDI version

IP 65

Stan

dalo

neSt

anda

lone

12/13

- Dimensions (L x H x D) : 70mmx60mmx16mm

- Programming on site with master key

or handheld terminal

- Wiring : 2 wires/20m max between the controller

and reader

- Power supply : 12/24 Vac or Vdc

- Control relay NO/NC

- Adjustable locke release time from 1 second to 99 seconds

- Removable terminal connections

- Operating temperature : -20°C to +70°C

- Vigik approved product

Easy Door Controller is a standalone controller. It manages one door and 1500 keys. Easy Door Controller is easy to install (only 2 wires to the reader) and easy to programm. Additions, cancellations and update badges are made by the master key or through the handheld terminal.

Thanks to its size, Easy Central Door Controller is ideally suited to be mounted behind an entry panel.Thus, you can add access control to your intercom system at a very attractive price.

GB-140-052 EASY DOOR CONTROLLER

Easy Door Controller is an economic and easy to install service thanks to its small size, its wide power supply range and easy programming.

13.56MHz Mifare 1 door 1500


READERS see table pages 70/71Distance maximum between reader and the controller : 20m with shielded twisted cable.

GB-140-052 Easy Door Controller

GB-140-058 Flush mounted reader + controller - all in one - Vandal resistant Outside dimensions : 150mmx110mm. Flush mounted box included (dimensions 132mmx92mmx50mm).

GB-140-059 Surface mount reader + controller - all in one - Vandal resistant Dimensions : 140mmx96mmx35mm.

CONTROLLER

GB-020-122 Mullion reader 13.56MHz Dimensions : 78mmx43mmx17mm. Wire gauge : 2 wires.

GB-020-140 Mushroom reader 13.56MHz Easy installation on existing plate (drilling Ø 25mm). Dimensions : 43mmx7mmx34mm. Wire gauge : 2 wires. IP53 - M2 rated.

GB-020-123 Vandal resistant surface mount reader 13.56MHz Dimensions : 100mmx45mmx16mm. Wire gauge : 2 wires.

GB-020-126 40X40 panel mount reader 13.56MHz Integration in drilling 40x40mm. Dimensions : 60mmx60mmx17mm OD. Wire gauge : 2 wires.

GB-020-127 Sinthesi reader 13.56MHz Dimensions : 85mmx85mm Wire gauge : 2 wires.

FD-020-133 Sinthesi Steel reader 13.56MHz Dimensions : 85mmx85mm Wire gauge : 2 wires.

FD-020-138 P60 reader 13.56MHz Dimensions : 78mmx78mmx18mm Wire gauge : 2 wires. Surface mount or suitable for standard electric backbox.

Stan

dalo

neSt

anda

lone

14/15

All our keys are rated IP68 - IK08.Mifare technology.Dimensions : 47mmx35mmx4mm. With metal eyelet to be placed on a key ring.Operating temperature -20°C to +70°C.Engraving of a number of 8 terms and counterboring to prevent erasure.Key uniqueness guarantee.Customization on request.

FD-010-010 Proximity key 13.56MHz black

FD-010-027 Proximity key 13.56MHz white

FD-010-028 Proximity key 13.56MHz blue

FD-010-029 Proximity key 13.56MHz red

FD-010-030 Proximity key 13.56MHz green

FD-010-078 Proximity key 13.56MHz yellow FD-010-081 Proximity key 13.56MHz orange

FD-010-080 Master proximity key 13.56MHz To programm as a master key on the controller

Wiring diagram

r

PROXIMITY KEYS


FD-010-051 Pack of 10 cards ISO 13.56MHz Dimensions : 85mmx54mmx1mm. Credit card size.

Operating temperature : -20°C to +50°C. GB-500-123 Handheld terminal Dimensions : 100mmx180mmx40mm. Allows control and management of 2 wire controllers via the reader.

delete / edit / add badges depending on the controller. Operates with a battery and charger (included).

FD-500-005 Stainless steel push button diam. 19mm Double contact NO / NC isolated. Wire output. Easy installation on existing plate (hole diam. 19.2 mm). Screwing from the rear (nut supplied).

GB-500-009 Stainless steel push button diam. 19mm with plate 40x40mm Double contact NO / NC isolated. Wire output. Easy installation on existing plate. Screwing from the rear (nut supplied). Printing on request (term «exit»).

GB-500-010 Stainless steel push button diam. 19mm with plate 100x60mm Double contact NO / NC isolated. Wire output. Supplied without embedded box, with screw and tool. Screwing from the front.

OPTIONS

Stan

dalo

neSt

anda

lone

16/17


- Programming on controller

- Integrated receiver HF 433MHz (for remote control)

- Programming reader integrated

- Removable memory useful in case of backup or

copy / paste function

- Simple installation :

3 connection wires with proximity readers (up to100m)

- Fixed on DIN rail

- Power supply : 12Vac or Vdc, 1A

GB-100-021 TRANSIT

TRANSIT is a standalone access control controller managing up to two doors. The controller has an enrolment reader, a keypad (3 buttons , and ) and a display which enable a programming on site without any tools.Transit has a HF receiver allowing the use of remotes.

Transit is a product well suited to residences which wish to equip themselves with a simple and easy system to control an access thanks to RF (gate, garage) and / or a pedestrian access in proximity (gate, hall door).

125KHz / 433MHz 2 doors 999


GB-100-021 Transit 999 keys. Transit is a controller up to two doors with a capacity of 999 users. Integrated RF receiver. Can be used in proximity (when added a reader) and in RF.

• Residential housingFront door and house door controlled by a proximity key. Front gate controlled by left button of the remote control.

Door for building access controlled by the proximity key integrated in the remote control.

CONTROLLER

POSSIBLE CONFIGURATIONS

Stan

dalo

neSt

anda

lone

18/19

FD-020-080 Mullion reader 125Khz Dimensions : 78mmx43mmx17mm. Wire gauge : 3 wires.

commercial property and residential housing. Reading distance : up to 30mm.

FD-020-084 Vandal resistant surface mount reader 125Khz Dimensions : 100mmx45mmx16mm. Wire gauge : 3 wires. Aesthetic and discreet design. With a robust design, the reader is ideally suited for a vandal resistant protection. Reading distance : up to 15mm.

FD-020-006 40x40 OEM reader 125Khz Dimensions : 60mmx60mmx20mm. Wire gauge : 3 wires.

FDI also provides the 40x40 reader in stainless steel, Sinthesi or Sinthesi-steel frame. Reading distance : up to 40mm.

FD-020-005 Stainless steel reader 125Khz Front dimensions : 110x110mm Embedded box dimensions : 94mmx94mmx30mm. Wire gauge : 3 wires. IP-53 rated. Reading distance : up to 40mm.

READERS see table pages 70/71


FD-020-131 Sinthesi-Steel reader 125Khz Frame dimensions : 85mmx85mm. Wire gauge : 3 wires. Reading distance : up to 40mm.

FD-030-050 Sinthesi reader 125Khz Frame dimensions : 85mmx85mm. Wire gauge : 3 wires. Reading distance : up to 40mm.

FD-030-005 Mushroom reader 125Khz Dimensions : 71.60mmx60.60mmx17mm. Wire gauge : 3 wires. Reading distance: up to 30mm.

Stan

dalo

ne

READERS see table pages 70/71

Stan

dalo

ne

OPTIONS

20/21


GB-500-009 Stainless steel push button diam. 19mm with plate 40x40mm Double contact NO / NC isolated. Wire output. Easy installation on existing plate Screwing from the rear (nut supplied). Printing on request (term «exit»).

GB-500-010 Stainless steel push button diam. 19mm with plate 100x60mm Double contact NO / NC isolated. Wire output. Delivered without embedded box, with screw and tool. Screwing from the front.

FD-500-025 Stilus antenna 433MHz Used to improve the reception distance.

FD-010-012 Proximity key 125KHz IP68 - IK08 rated. Dimensions : 47mmx35mmx4mm. With metal eyelet to be placed on a key ring. Engraving of a number of 8 terms and counterboring to prevent erasure. Key uniqueness guarantee. Customization on request.

FD-010-070 Pack of 10 cards ISO 125KHz Dimensions : 85mmx54mmx1mm. Proximity card in white PVC. Credit card size. Remote control uniqueness guarantee.

Customization on request.

FD-010-015 Combined remote control 125KHz/433MHz Remote control, key ring style including 2 channel frequency 433MHz and proximity key 125KHz. IP 54 rated. Coded in factory, 4 billion possible combinations. Customization on request.

PROXIMITY KEYS / REMOTE CONTROLS see table page 72


HF antenna 433MHz in option

Coax cable 50 Ohms 10m max

Wiring diagram in proximity

2 wires

3 wires

2 wires

2 wires

2 wires

3 wires

2 wires

2 wires

Wiring diagram in proximity and HF

3 wires

2 wires

2 wires

Door 1 Door 2

2 wires

2 wires

Stan

dalo

ne

Door 1 Door 2

Stan

dalo

ne

22/23

GB-135-011 VITWO RO

- Dimensions (L x H x D): 179mmx134mmx54mm

- Programming: directly on the controller

or via a PC and the software Mémosoft

- Power supply : 12/24 Vac ou Vdc, 1A

- Controller wiring <=> readers :

2 polarized wires 100m max

- Events management (30000 last events)

- Anti Pass Back / Anti Pass Time management

- Removable back-up memory

- Fixed on DIN rail


Vitwo RO is a controller for 4 doors. It works with proximity readers and receivers in RF. Programming is done at the front of the controller, by the handheld terminal via the reader or by the software Memosoft (via a removable back-up memory).Vitwo can manage up to 5000 keys or remote controls . It controls also up to 30000 events on keys or remote controls, intercom and push buttons.

Vitwo is a product well suited to residences which wish to equip themselves with a simple and easy system to control an access in RF (gate, garage) and / or a pedestrian access (gate, hall door) and intercoms.

13.56MHz Mifare 4 doors 5000 in

proximity or RF


Garage or Radio Exit car park receiver buttons

Doors

Key, RF remote

2 wires

GB-135-011 Vitwo RO

FD-020-081 Mullion reader 13.56 MHz Dimensions : 78mmx43mmx17mm. Wire gauge : 2 wires - 100m. Bi-color led red/green.

FD-020-086 Vandal resistant surface mount reader 13.56 MHz Dimensions : 100mmx45mmx17mm. Wire gauge : 2 wires - 100m. Bi-color led red/green + buzzer.

FD-020-007 OEM 40x40 reader 13.56Mhz Frame dimensions : 40mmx40mm. Wire gauge : 2 wires - 100m. Bi-color led red/green.

FD-020-016 Stainless steel reader 13.56Mhz Frame dimensions : 110x110mm - Embedded box dim. : 94x94x30mm. Wire gauge : 2 wires - 100m. IP-53 rated.

FD-020-017 Sinthesi reader 13.56MHz Dimensions : 85mmx85mm. Wire gauge : 2 wires. FD-020-132 Sinthesi-Steel reader 13.56MHz Dimensions : 85mmx85mm. Wire gauge : 2 wires.

FD-030-065 Mushroom reader 13.56 MHz Wire gauge : 2 wires - 100m. Easy installation on existing plate (drilling diam.25mm). Screwing from the rear, nut supplied.

FD-020-022 RF receiver 433MHzFD-020-023 RF receiver 868MHz Dimensions : 72mmx60mmx12mm. Wire gauge : 2 wires - 100m.

with optional antenna FD-500-025 (433MHz) /FD-500-036 (868MHz). Entrance in loop to detect vehicules (not supplied).

FD-020-139 P60 reader 13.56MHz Dimensions : 78mmx78mmx18mm. Wire gauge : 2 wires - 100m. Surface mount or suitable for standard electric backbox.

CONTROLLER

PROXIMITY READERS AND RECEIVERS see table pages 70/71

Stan

dalo

neSt

anda

lone

24/25

FD-050-087 Memosoft software Mémosoft is a software used for data management : adding and deleting keys, update user names. All data are transferred into removable memory which is then inserted into the controller to update it. To use with USB encoder FD-500-045.

GB-500-045 Encoder 13.56MHz and 433-868MHz Dimensions : 130mmx105mmx30mm. Can encode keys. It is connected to the PC via a USB cord (supplied). It contains a backup removable memory reader.

FD-010-010 Proximity key 13.56MHz IP68 - IK08 rated. Dimensions : 47mmx35mmx4mm. With metal eyelet to be placed on a key ring. Engraving of a number of 8 terms and counterboring to prevent erasure. Key uniqueness guarantee. Customization on request.

FD-010-051 Pack of 10 cards ISO 13.56MHz Dimensions : 85mmx54mmx1mm. Proximity card in white plastic PVC. Credit card size. Remote control uniqueness guarantee.


FD-010-047 Combined remote control 13.56MHz/433MHzFD-010-048 Combined remote control 13.56MHz/868MHz Remote control, key ring style including 2 channel frequency 13.56MHz/868MHz and proximity key 13.56MHz. IP 54 rated. Coded in factory, 4 billion possible combinations. Customization on request. To use with RF receiver FD-020-022 (433MHz) / FD-020-023 (868MHz).

SOFTWARE



OPTIONS

GB-500-123 Handheld terminal Dimensions : 100mmx180mmx40mm. Allows control and management of 2 wire controllers from the reader.

delete / edit / add badges depending of the controller. Operates with a battery and charger (included).

FD-500-025 Stilus antenna 433MHzFD-500-036 Stilus antenna 868MHz Used to improve the reception distance. To use with receiver FD-020-022 (433MHz) / FD-020-023 (868MHz).

FD-500-005 Stainless steel push button diam. 19mm Double contact NO / NC isolated. Output wire. Easy installation on existing plate (hole diam. 19.2 mm). Screwing from the rear (nut supplied).



Stan

dalo

neSt

anda

lone

26/27


CENTRALIZED MANAGEMENT FROM A SOFTWARE NOT CONNECTED TO THE CONTROLLER.THE CONTROLLER IS UPDATED WHEN THE KEYS ARE SWIPED.

RE

AD

A

ND

W

RI

TE

MA

NA

GE

ME

NT

Rea

d an

d w

rite

Rea

d an

d w

rite

28/29

GB-140-052 EASY DOOR CONTROLLER

Easy Door Controller is an access control system designed for small residential applications. It is used remotely as read-write mode using an encoder and an internet connection on

www.easydoorcontroller.com.

With our free web software really easy to use, manage your keys up to 50 doors/site.For remote management, you simply have to :

Note the lock N° of the installed controller (written on top label)Register on www.easydoorcontroller.comProgram the keys using the encoder which records into the key one or several N° of allowed

doors.

To remotely delete permissions for a key, you must simply cancel that key on the website and program a new key. At

13.56MHz Mifare 1 door 2000



- Remote programming with an encoder and an internet

connection

- Wiring : 2 wires/20m max

- Power supply : 12/24 Vac or Vdc

- Control relay NO/NC

- Adjustable lock release time from 1 second to 99 seconds

- Removable terminal connections

- Operating temperature : -20°C to +70°C


EASY DOOR CONTROLLER :SIMPLE MANAGEMENT WITHOUT GOING ON SITE,UNIVERSAL ACCESS AND SOFTWARE UP TO DATE THROUGH INTERNET,SAVED DATA.

Rea

d an

d w

rite


Rea

d an

d w

rite

30/31

Wiring diagram

behind a panel to add access control to your intercom system.

It is an economical solution that also minimizes maintenance costs : the replacement of a proximity key in case of loss is less expensive than replacing a mechanical key.


Rea

d an

d w

rite

READERS see table pages 70/71Distance maximum between reader and the controller : 20m with shielded twisted cable.

GB-140-052 Easy Door Controller

GB-140-058 Flush mounted reader + controller - all in one Outside dimensions : 150mmx110mm. Flush mounted box included (dimensions 132mmx92mmx50mm).

GB-140-059 Surface mount reader + controller - all in one Dimensions : 140mmx96mmx35mm.

CONTROLLER

GB-020-122 Mullion reader 13.56MHz Dimensions : 78mmx43mmx17mm. Wire gauge : 2 wires.

GB-020-140 Mushroom reader 13.56MHz Easy installation on existing plate (drilling Ø25mm) Dimensions : 43mmx7mmx34mm. Wire gauge : 2 wires. IP53 - M2 rated.

GB-020-123 Vandal resistant surface mount reader 13.56MHz Dimensions : 100mmx45mmx16mm. Wire gauge : 2 wires.

GB-020-126 40X40 panel mount reader 13.56MHz Integration in drilling 40x40mm. Dimensions : 60mmx60mmx17mm OD. Wire gauge : 2 wires.

GB-020-127 Sinthesi reader 13.56MHz Dimensions : 85mmx85mm Wire gauge : 2 wires.

FD-020-133 Sinthesi Steel reader 13.56MHz Dimensions : 85mmx85mm Wire gauge : 2 wires.

FD-020-138 P60 reader 13.56MHz Dimensions : 78mmx78mmx18mm Wire gauge : 2 wires. Surface mount or suitable for standard electric backbox.

Rea

d an

d w

rite

32/33


All our keys are rated IP68 - IK08.Mifare technology.Dimensions : 47mmx35mmx4mm. With metal eyelet to be placed on a key ring.Management of the key colour into the software. Operating temperature -20°C to +70°C.Engraving of a number of 8 terms and counterboring to prevent erasure.Key uniqueness guarantee.Customization on request.







FD-010-142 Proximity key 4K 13.56MHz orange/black 4K key, for events management.

PROXIMITY KEYS

FD-500-336 Easy Door Controller demonstration panel Presented on a light and aesthetic metal support, an Easy Door controller and a mullion reader enable all required demonstrations.




OPTIONS

Rea

d an

d w

rite

FD-010-051 Pack of 10 cards ISO 13.56MHz Dimensions : 85mmx54mmx1mm. Credit card size.

Operating temperature : -20°C to +50°C.

GB-500-123 Handheld terminal Dimensions : 100mmx180mmx40mm. Allows control and management of 2 wires controllers from the reader.


Rea

d an

d w

rite

34/35

GB-135-001 & GB-135-002 VITWO READ AND WRITE

- Dimensions (L x H x D): 179mmx134mmx54mm

- Easy installation:

. Wide power supply range : 12/24 Vac or Vdc

. Reader and receiver : 2 polarised wires 100m max

. Removable terminal connections

. Setting on the controller via display and three buttons

- 5000 keys or remote control per controller/65000 per site

- 2 or 4 doors per controller depending on model/128 doors per site

- Advanced functions :

. Free access to door depending on time

. Anti pass back / anti pass time management

. Events management (30000 last events)

. Management of FDI’s entry panels

- Keys management via software + encoder

- Removable back-up memory


The read and write system is suitable for property managers wishing to manage the access control of their remote buildings without having a connection with these buildings.

the controller authorizes or not the access and updates its own database.Thus, controllers are always up to date without communicating directly with the Visiopac server.This system also provides a very accomplished key management as it is possible to authorize a key to thousands of doors, assign validity dates or schedules.

Vitwo is able to manage FDI’s entry panels.In this case, authorization of keys and names, call codes and / or combined are updated on the display when the card is

On the other hand, the use of Vitwo only needs a software to manage access control and intercom.

13.56MHz Mifare 2 or 4 doors 5000

in proximity or HF


GB-050-010 VISIOPAC

- Management of controller Vitwo Read & Write.- 128 doors per site, 1000 sites per database and unlimited number of databases for software.- 65000 keys per site.- Management of the keys functioning as follows: . All sites or part . Per site, all doors or selection . Permanent or scheduled . Expiry date- Management of entry panels from FDI when connected to Vitwo controller.- Management of special readers (mailbox for example).- Recovery of events via blue memory.- Excel import / export.

VITWO AND READ AND WRITE MANAGEMENT

- Ma- 128data- 650- Ma

Ma

Rea

d an

d w

rite

Rea

d an

d w

rite

36/37

GB-135-001 Vitwo Read and Write 2 doors Dimensions (L x H x D) : 174mmx90mm (134mm with cover) x54mm. 2 doors in proximity or HF / 5000 keys / 30000 events. Anti pass back / free access depending on time. Easy installation thanks to display + 3 buttons. Removable back-up memory. Removable terminal connections. Fixing on Din rail (10 modules) or by screw (not supplied).

GB-135-002 Vitwo Read and Write 4 doors Identical features to Vitwo R/W 2 doors (see above), except 4 doors in proximity or RF / 5000 keys / 30000 events.

GB-050-010 Visiopac Software for Vitwo read & write controller management. One site installation. Allows Vitwo controller management, real estates, encoding and key management. To use with the encoder GB-500-045.

GB-500-045 Encoder 13.56MHz and 433-868MHz Dimensions : 130mmx105mmx30mm. Can encode keys and remote controls. It is connected to the PC via a USB cord (supplied). It contains a backup removable memory reader.

CONTROLLER

SOFTWARE


Rea

d an

d w

rite

FD-020-081 Mullion reader 13.56 MHz Dimensions : 78mmx43mmx17mm. Wire gauge : 2 wires - 100m. Led bi-color red/green.

FD-020-086 Vandal resistant surface mount reader 13.56 MHz Dimensions : 100mmx45mmx17mm. Wire gauge : 2 wires - 100m. Led bi-color red/green + buzzer.

FD-020-007 OEM 40x40 reader 13.56Mhz Frame dimensions : 40mmx40mm. Wire gauge : 2 wires - 100m. Led bi-color red/green.

FD-020-016 Stainless steel reader 13.56Mhz Frame dimensions : 110x110mm - Embedded box dim. : 94x94x30mm. Wire gauge : 2 wires - 100m. Led bi-color red/green. IP-53 rated.

FD-020-017 Sinthesi reader 13.56MHz Dimensions : 85mmx85mm. Wire gauge : 2 wires. Led bi-color red/green. FD-020-132 Sinthesi-Steel reader 13.56MHz Dimensions : 85mmx85mm. Wire gauge : 2 wires. Led bi-color red/green.

FD-030-065 Mushroom reader 13.56 MHz Wire gauge : 2 wires - 100m. Led bi-color red/green. Easy installation on existing plate (drilling diam.25mm). Screwing from the rear, nut supplied.

FD-020-022 HF receiver 433MHzFD-020-023 HF receiver 868MHz Dimensions : 72mmx60mmx12mm. Wire gauge : 2 wires - 100m.

with optional antenna FD-500-025 (433MHz) /FD-500-036 (868MHz). Loop input to detect vehicules (not supplied).

FD-020-139 P60 reader 13.56MHz Dimensions : 78mmx78mmx18mm. Wire gauge : 2 wires - 100m. Surface mount or suitable for standard electric backbox.

PROXIMITY READERS AND RECEIVERS see table pages 70/71

Rea

d an

d w

rite

38/39

FD-010-020 Combined remote control read and write 433MHzFD-010-022 Combined remote control read and write 868MHz Remote control, key ring style including 2 channels frequency 13.56MHz/868MHz and proximity key 13.56MHz. IP 54 rated. Coded in factory, 4 billion possible combinations. Customization on request. To use with RF receiver FD-020-022 (433MHz) / FD-020-023 (868MHz).


All our keys are rated IP68 - IK08.Mifare tech nology.Dimensions : 47mmx35mmx4mm. With metal eyelet to be placed on a key ring.Management of the key colour in the software. Operating temperature -20°C to +70°C.Engraving of a number of 8 terms and counterboring to prevent erasure.Key uniqueness guarantee.Customization on request.







PROXIMITY KEYS / REMOTE CONTROLS see table pages 72

OPTIONS

GB-500-123 Handheld terminal Dimensions : 100mmx180mmx40mm. Allows control and management of 2 wire controllers via the reader.


FD-500-025 Stilus antenna 433MHzFD-500-036 Stilus antenna 868MHz Used to improve the reception distance. To use with receiver FD-020-022 (433MHz) / FD-020-023 (868MHz).




Rea

d an

d w

rite

Rea

d an

d w

rite

40/41


CENTRALIZED MANAGEMENT FROM A CONNECTED SOFTWARE.THE CONTROLLER IS UPDATED IN REAL TIME.

ON

L

IN

EM

AN

AG

EM

EN

T

On

line

On

line

42/43

GB-120-006 PASSAN PREMIUM

• Advanced features:

. Contact gate management (door forced, open too long)

. Anti pass back, anti pass time, counting, area presence

. Timetable keys, doors, lifts, display name on entry panels, holiday periods. Current events, stored and warning (pop-up or SMS via Gprs optional). Interface with other trades via dry contacts (intrusion,

Passan Premium is a modular and stockable controller especially suited to medium and large residential community. Thanks to its advanced features, the system is also suitable for small and medium commercial buildings such as

The controller can control up to two doors. Extension cards for doors 3/4 doors and 5/6 are used to increase the capacity of the controller from two to six doors. Passan Premium can also be connected in network. 32 controllers maximum can be connected together to control 192 doors.Passan Premium is also characterised by the possibility to manage and combine the most diverse technologies to be adapted to the diversity of needs. The controller can handle all types of readers : keypads, proximity readers, RF receivers and is open to any other technology via the optional Wiegand interface.

Passan Premium has a high level of reliability and exceptional security with a high protection of the software. Passansoft software is designed for an easy use for non-specialized operator while providing comprehensive setup possibilities.

Prox 125 KHz or 13.56MHz 2 to 6 doors 2700 per site

HF 433MHz or 868MHz per controller

- Great modularity

- Local or remote programming

- Diagnosis with leds: power, readers and connecting networks.

- 6000 events per controller

- Up to 32 controllers networked on 1000m, 192 doors in total,

- Management of readers, receivers, FDI 3 wire keypads and any other

technology via Wiegand Passan Premium interface

- Local or remote programming via RS232, modem or TCP/IP with option

- Permanent diagnosis via power and peripherals leds

- 2700 keys, 50 groups

- Operating temperature : 0°C to +50°C


SI

MPLE

ACCESS

CONTROL

LIFT

Passan Premium

Passan Premium

Passan Premium

Passan Premium

INTERCOM

Door 3+4 ext. module

FD-120-205 OR FD-120-206 OR FD-120-207

Manage up to 2 readers

Manage up to 2 readers and third party connected

systems (Alarm, detector, CCTV...)


Manage up to 4 readers and third party connected

systems (Alarm, detector, CCTV...)


Passan Premium Lift ext. module

Manage floor access for one or two lifts

Passan Premium

Manage floor access for one or two lifts and third party connected systems

(Alarm...)

Passan Premium Intercom ext. module

Manage readers and intercom on 2 entry panels

Manage readers and intercom on 2 entry

panels and third party connected systems

Input / Output ext. modulesFD-120-205 OR FD-120-206 OR FD-120-207

FD-120-205 OR FD-120-206 OR FD-120-207

FD-120-205 OR FD-120-206 OR FD-120-207

Passan Premium Intercom ext. module

Passan Premium

On

line

Door 3+4 ext. module Input / Output ext. modules

Door 3+4 ext. module Door 5+6 ext. module

Lift ext. module Input / Output ext. modules

Input / Output ext. modules

On

line

44/45

GB-120-006 Passan Premium controller Dimensions (H x L x D) : 280mmx161mmx97mm Controller 2 doors, expandable up to 6 with options (see below). 32 controllers networked can manage up to 32x6 doors so 192 doors. 2700 keys.

50 key groups. 6000 events. Bus RS485 allowing the connection of 32 controllers on 1000m. Connection to a PC via RS232, USB via adaptator (not supplied) or TCP/IP with the optional module FD-500-267.

IP-20.

FD-120-010 Door 3 & 4 extension moduleFD-120-015 Door 5 & 6 extension module Each controller can increase its capacity up to 6 doors using extension modules. Module FD-120-010 is used to increase the capacity of the controller to 4 doors and the module FD-120-015 up to 6 doors. Possibility to connect up to 32 controllers in network thereby increasing the capacity up to 192 doors in total.

FD-120-205 8 output extension moduleFD-120-206 8 input extension moduleFD-120-207 4 input / 4 output extension module An input informs Passan Premium about the status of a device

Passan Premium inputs are based on the «all-or-nothing» mode (TOR). On the other hand, Premium Passan is also able to control a device or another system via an output. For example, an intruder alarm, video recorder, etc. Passan dry contacts are normally open (NO).

FD-120-208 Lift extension module A Passan Premium controller dedicated to lift management can control two risers and a maximum of 4 decoders.

GB-040-026 Floor decoder - relay box Relay box of 10 outputs : for each output, 1 NO dry contact and 1 NC dry contact.

CONTROLLER

CONTROLLER OPTIONS


FD-120-046 Intercom extension module The intercom extension module allows you to connect intercom entry panels to Passan Premium. A Passan controller can handle two entry panels and a maximum of 64 entry panels can be installed in network.

FD-040-015 Intercom decoder - relay box Used with FDI standard entry panels. Specially adapted for the renovation of audio intercom installations 1+n or 4+n. Provides a decoder for 10 housings.

GB-040-021 Intercom video decoder - relay box Used with FDI standard entry panels. Specially adapted for the renovation of video intercom installations without coax. Provides a decoder for 10 housings.

GB-050-006 Passansoft (see pages 50/51)

CONTROLLER OPTIONS

SOFTWARE Passansoft is ment for access control, elevator, intercom and video surveillance applications.Passansoft offers various advanced functions: - Key management :From a single window, the user allows his keys to his sites. When he leaves this window, the software connects to all the sites one after the other via modem or TCP/IP to update all the controllers.- Automatic tasks :Daily Passansoft connects to the sites and retrieves controllers events. The task can also sort out and send by e-mail these events.Automatic backup functions are also available :- User management :

- Anti pass back, counting, area presence :Passansoft screens provide information about the presence of people in areas of the site.- Manual control :

- Event :Passansoft displays events of controllers in real time or upon request.- Warning :For some events a popup opens in Passansoft. The event must be solved.Passansoft can manage an unlimited number of local or remote sites.The connection with controllers is achieved either in RS232 by cable (USB = optional serial) by modem or TCP/IP with module FD-500-267.A security key (dongle supplied) is required to authorize Passansoft to be connected to the controller network.

*1 with entry panels made by FDI Matelec

*2 with some DVR Urmet.

On

line

On

line

46/47

FD-020-080 Mullion reader 125KHzGB-020-124 Mullion reader 13.56MHz Dimensions : 78mmx43mmx17mm. Wire gauge : 3 wires - 100m. Led bi-color red/green. Buzzer on the 13.56MHz reader.

FD-020-084 Vandal resistant reader 125KHz FD-020-142 Vandal resistant reader 13.56MHz Dimensions : 100mmx45mmx17mm. Wire gauge : 3 wires - 100m. Buzzer. Bi-color led red/green + buzzer.

FD-020-006 OEM 40x40 reader 125KHz FD-020-144 OEM 40x40 reader 13.56MHz Frame dimensions : 40mmx40mm. OD dimensions : 60mmx60mmx16mm. Wire gauge : 3 wires - 100m. Bi-color led red/green.

FD-020-005 Stainless steel reader 125KHz Frame dimensions : 110x110mm - Embedded box dim. : 94x94x30mm. Wire gauge : 3 wires - 100m. IP-53 rated.

FD-030-050 Sinthesi reader 125KHzFD-020-147 Sinthesi reader 13.56MHz Dimensions : 85mmx85mm. Wire gauge : 3 wires - 100m.

FD-020-131 Sinthesi-Steel reader 125KHzFD-020-149 Sinthesi-Steel reader 13.56MHz Dimensions : 85mmx85mm. Wire gauge : 3 wires - 100m.

FD-030-005 Mushroom reader 125KHz Easy installation on existing support (drilling diam.25mm).

GB-020-020 RF receiver 433MHzGB-020-021 RF receiver 868MHz Allows to receive a radio signal transmitted by the following remote : in 433MHz FD-010-015 and FD-010-047, in 868MHz : FD-010-021 and FD-010-048. Reach of 20m without antenna and to 50m with antenna 433/868.

GB-025-072 Vandal resistant mullion keypad Casting vandal resistant frame. Codes programmable via Passansoft software. Backlit keypad.

READERS / RECEIVERS / KEYPADS see tables pages70/71/72


FD-010-012 Proximity key 125KHzFD-010-010 Proximity key 13.56MHz IP68 - IK08 rated. Dimensions : 47mmx35mmx4mm. With metal eyelet to be placed on a key ring. Engraving of a number of 8 terms and counterboring to prevent erasure. Key uniqueness guarantee. Customization on request.

FD-010-070 Pack of 10 cards ISO 125KHzFD-010-051 Pack of 10 cards ISO 13.56MHz Dimensions : 85mmx54mmx1mm. Proximity card in white plastic PVC. Credit card size. Remote control uniqueness guarantee.


FD-010-015 Combined remote control Prox 125KHz/ RF 433MHz Remote control, key ring style including 2 channels frequency. IP 54 rated. Coded in factory, 4 billion possible combinations. Customization on request. To use with receiver GB-020-020.

FD-010-048 Combined remote control Prox 13.56MHz/RF 868MHz Remote control, key ring style including 2 channels frequency . IP 54 rated. Coded in factory, 4 billion possible combinations. Customization on request. To use with RF receiver FD-020-021.


On

line

On

line

FD-025-081 Stainless Steel backlit keypad Dimensions (L x H x D): 135mmx100mmx43mm. Flush mount. Stainless steel frame 2,5mm thick. Power supply : 12 Vac or 12 Vdc.

48/49

FD-500-267 RS485/ TCP/IP interface To connect Passan Premium to an IP network. Power supply :12Vdc.

FD-500-025 Stilus antenna 433MHzFD-500-036 Stilus antenna 868MHz Used to improve the reception distance. To use with receiver GB-020-020 (433MHz) and receiver GB-020-021 (868MHz).

FD-500-173 PSTN Modem Used to be connected to Passansoft remotely via a traditional PSTN phone line.

FD-500-028 GPRS RS232 Modem

(ex : broken door). Requires a sim card and a M2M subscription.

GB-500-118 30 bits Wiegand interface Used to connect a device to the 3 wires bus Passan using Wiegand protocol or dataclock.

FD-500-268 USB encoder 125KHzGB-500-045 USB encoder 13.56MHz Dimensions : 130mmx105mmx30mm. Can encode keys. It is connected to the PC via a USB cord (supplied). It contains a backup removable memory reader.

FD-500-034 RS232 serial cable Used to connect the controller to the PC. Add interface FD-500-214 if the PC do not have serial port.

OPTIONS


FD-500-214 USB RS 232 adaptator lead Used to connect the controller to the computer when there is no serial port on the computer (in addition to cable FD-500-034).

FD-500-191 Repeater RS485 Can extend the maximum cable distance network : up to 2000m

FD-500-043 232-485 adaptator Can extend the maximum cable distance : up to 1000m

Works in pairs.

GB-500-005 Stainless steel push button diam. 19mm Double contact NO / NC isolated. Wire output. Easy installation on existing plate (hole diam. 19.2 mm). Screwing from the rear (nut supplied).


GB-500-010 Stainless steel push button diam. 19mm with plate 100x60mm Double contact NO / NC isolated. Wire output. Delivered without embedded box with screw and tool. Screwing from the front.

70-000-457 Power supply 12V/1A Dimensions (H x L x D) : 97mmx17mmx70mm.

Din rail mounting (6 modules). Terminal cover provided. Class 2.

OPTIONS

On

line

On

line

50/51

- Simple and intuitive software

- Management of keys, access groups to doors and

access group to lifts

- Current events, stored or warning

- Anti-Pass back, counting and presence area

- Interface with other devices or trades via inputs and outputs

- Integration of the intercom based on entry panels from FDI

- CCTV integration

Passansoft is a simple and intuitive software that allows the management and access control system Passan Premium. It is designed for an easy use by an unskilled operator, while providing large setup possibilities.Passansoft software allows to manage an unlimited number of sites on a single computer. The software allows backup copies of sites. 4 levels of software access code can be used: administrators, managers, users and guests to increase the security of the site.The fonctionning license ‘dongle’ is required for each installation.

Two connection modes are available:

1000m with 2 interfaces (FD-500-043).- Remotely : TCP / IP network via Internet or Intranet or via telephone using the FDI modem (FD-500-173)Passansoft covers all the requirements of small and medium commercial sites.

DIRECT ACCESS TO MAIN FEATURES

DIRECT ACCESS TO MULTI-SITE

Minimum computer requirements :

• Works with Windows XP / Vista / Seven/Win-dows 8• RAM : 1 Gb or more - 1 GHz or more • Free space : 8Go on harddisk• Resolution : 1024 x 768

GB-050-006 PASSANSOFT

PASSANSOFT


PASSANSOFT IN JUST ONE CLICK !

Key management :permissions, contact information, comments, pictures in jpeg format). Export to a

Group management : up to 50 groups with personal permissionshours.

Event in real time : Manage up to 50 types of events. The software allows to follow: the events on site, the events managed I/O, system status and the status of network connections.Possibility of differentiating event processing: simple report on time with online viewing, alarm storing or trigging.

Video in real time

Anti pass back prevents a user to use a key twice on the same reader. For example,

impossible to take the key from an employee.The anti pass time is an anti pass back time-limited.Passansoft manages the anti pass back only on the inputs. In this case, the output is always free. Example: a parking.The counting is used to limit the number of people in an area. Passansoft manages

the next two are informative, and when the last level is reached, no more key is allowed to enter.Actions can be triggered at the crossing of levels.Passansoft includes original FDI entry panels. The Passansoft user then manages the access control, intercom, lift and CCTV from the same software.In addition, Passan Premium provides the link between the intercom and lift. Thus, when the resident called by the intercom opens the door to the visitor, the controller

GET MORE WITH P-ALERT ...P-Alert: P-Alert is used to monitor remote sites. A warning message will appear on your computer to inform you that something is happening on a site under surveil-lance.P-Alert is used with Passansoft.

GET MORE WITH P-ALERT ...P-Alert:P-Alert is used to monitor remote sites. A warning message will appear on your computer to inform you that something is happening on a site under surveil-lance.P-Alert is used with Passansoft.

On

line

On

line

52/53

FD-144-001 TRANSIT IP

- 5000 keys / 100 groups / 5 administrator access /

20 timeslots / 20 holiday periods / 16 voicemails

- Per door : 1 relay, 1 entry BP, 1 door contact, 1 reader

- Map option: 2 analog inputs with end of line resistor

+ 2 outputs that can be customized

- Embedded web server

- 2 wires between reader <=> controller, distance max. 100 m

- Sending messages (alerts by e-mail after an event or pre-

programmed report)

- SAS Mode (example: building input)

- Power supply : POE or 12/24 Vac/Vdc

• An embedded Web server friendly and intuitive . No software to install . Easy update via IP

. Remote door opening (impulse or hold) . Multi-user (login of several users to the controller)

• A cost saving solution . Use of an existing IP network . Remote checking, management and maintenance . Off site control of the devices working status

• High security . View of the events and management in real time . Access granted with a key, a code or key+code (secured mode) . Management of «anti-panic code» . Key cancellation in real time . Possible link to 2 IP video cameras (not included)

• A wide range of readers . Proximity reader 13.56 MHz Mifare . With or without keypadd . Customizable voice messages. Examples: «access denied», «access granted» . 3 programmable status leds (red, orange and green).

13.56MHz Mifare 2 input doors 5000 per site

or 1 door

input/output


D D A C O M P L I A N T

TRANSIT IP LECTAUTO• An all in one solutionOne product : the functions of a controller and a reader managing access control • Easy to use and to install. Less wiring : intelligence at the door; Release of the exit push button, the door contact and the lock. Local supply 12-24 Vac/Vdc. Easy installation and time saving with its adapter panel (FD-500-274) for standard 60 mm electric backboxes

• Technical features . ISame features as the Transit IP controller, but with 1 door instead of 2, 1 analog input + 1 output. Available with or without keypad. Customizable voice messages. Example : «access denied», «access ganted». Accessory : surface mount bracket for standard electric backboxes of 60 mm

TRANSIT IP :A USER-FRIENDLY AND INTUITIVE WEB EMBEDDED SERVERA COST SAVING SOLUTION EASY TO USEADVANCED FUNCTIONSA HIGH SECURITY

TRANSIT IP

On

line

TRANSIT IP LECTAUTO

On

line

54/55

FD-144-001 Transit IP controller 2 doors - Power supply 12/24 Vac/VdcFD-144-002 Transit IP controller 2 doors - POE power supplyFD-144-003 Transit IP controller 2 doors Fixed by screws to the rail DIN. Power supply : 12 to 24 Vac or Vdc.

FD-144-004 Optional card for Transit IP - 2 input/2 output Dimensions (HxLxD) : 176mmx51mmx25mm. Installation on a Transit IP base (1 per controller).

Indoor reader 13.56 MHz - 2 wires - 100mFD-020-100 Terminal connection FD-020-107 Pigtail connection Dimensions (HxLxD) : 176mmx51mmx25mm. Power supply 12V supplied by the controller.

Indoor reader 13.56 MHz - 2 wires + audio (voice mails) - 100mFD-020-101 Terminal connection FD-020-108 Pigtail connection Dimensions (HxLxD) : 176mmx51mmx25mm. Power supply 12V supplied by the controller.

Indoor reader 13.56 MHz - 2 wires + audio (voice mails) + keypad - 100mFD-020-102 Terminal connectionFD-020-109 Pigtail connection Dimensions (HxLxD) : 176mmx51mmx25mm. Power supply 12V supplied by the controller.

FD-144-005 Kit controller Transit IP POE + 2 readers + 50 proximity keys

TRANSIT IP


FD-144-010 Standalone controller/reader 13.56 MHz Power supply : 12/24 Vac/Vdc FD-144-013 Standalone controller/reader 13.56 MHz with WIFI option

FD-144-011 Standalone controller/reader 13.56 MHz + voice messages Equivalent to FD-144-010 + voice messages.FD-144-014 Standalone controller/reader 13.56 MHz + voice messages + WIFI option

FD-144-012 Standalone controller/reader 13.56 MHz + voice messages + keypad Equivalent to FD-144-011 + keypad.FD-144-015 Standalone controller/reader 13.56 MHz + voice messages + keypad + WIFI option

FD-500-274 Base plate for TRANSIT IP LECTAUTO

FD-010-010 Proximity key 13.56MHz IP68 - IK08 rated. Dimensions : 47mmx35mmx4mm. With metal eyelet to be placed on a key ring. Engraving of a number of 8 terms and counterboring to prevent erasure. Key uniqueness guarantee. Customization on request.

FD-010-051 Pack of 10 cards ISO 13.56MHz Dimensions : 85mmx54mmx1mm. Proximity card in white plastic PVC. Credit card size. Remote control uniqueness guarantee.


TRANSIT IP LECTAUTO - ALL IN ONE

ACCESSORIES

On

line

On

line

56/57


ALL PERIPHERALS OR OPTIONAL DEVICES FORACCESS CONTROL.

TH

EA

CC

ES

SO

RI

ES

Acc

esso

ries

Acc

esso

ries

58/59

READERS 125KHZ

FD-020-084 VANDAL RESISTANT SURFACE MOUNT READER 125KHz - 3 WIRES

Dimensions (L x H x D) : 100mmx45mmx16mm

Power supply : 12 Vdc (supply by the controller)

Current : 30mA

Wire gauge : 3 wires / 100m max

Reading distance : up to 15 mm

Buzzer

Operating temperature : -10° to +50°C

L+ L0 LD

L+

L0

LD

The vandal resistant surface mount reader is a 125KHz proximity reader used with Passan Premium and Transit controllers. Elegant and durable, it

commercial properties and residential housing.

Functioning :Led of the reader is red when it is ready to read a proximity key. When a key is

key is valid the led turns green during the programmed door release time .

FD-020-080 MULLION READER 125KHz - 3 WIRES



Current : 30mA




L+

L0

LD

The mullion reader is a proximity reader 125KHz working with Passan Premium and Transit controllers. It sits directly on a wall without embedded

Functioning :A two-color led indicates the operating status of the reader: red to indicate that the reader is in use and green when the door is controlled and give the permission to enter.


FD-020-006 OEM 40X40 READER 125KHz - 3 WIRES

Dimensions (L x H x D): 60mmx60mmx20mm


Current : 30mA




FD-030-050 SINTHESI READER 125KHz - 3 WIRES

Frame dimensions : 85mmx85mm.

Reader with Sinthesi frame.

Two-color LED indicating the operating status of the reader : red to indicate that

the reader is in use and green when the door is controlled.

FD-020-131 SINTHESI STEEL READER 125KHz - 3 WIRES


Reader with Sinthesi Steel frame.

Two-color led indicating the operating status of the reader : red to indicate that


FD-020-005 STAINLESS STEEL READER 125KHz - 3 WIRES

Frame dimensions (H x L): 110mmx110 mm.

Embedded box dimensions (H x L x D): 94mmx94mmx30mm.

Installed in an embedded box with 316L stainless steel front plate.

Fixed by vandal resistant screw.



IP-53 rated.

The OEM 40x40 reader is a proximity reader 125KHz working with Passan

Functioning :Led of the reader is red when it is ready to read a proximity key. When a key

if the key is valid the led turns green during the programmed door release time.

5

Acc

esso

ries

Acc

esso

ries

60/61

READERS 125KHZFD-030-005 MUSHROOM READER 125KHz - 3 WIRES

Dimensions (L x H x D) : 71.6mmx60.6mmx17mm

Ideal for renovation (drill diameter 25mm)

Power supply : supplied by the controller

Wire gauge : 3 wires


IP 53 rated

Fireproof ABS box

Operating temperature : -20°C to +70°C

FD-020-020 RF RECEIVER 433MHz - 3 WIRES

(Exist in 868MHz part number. FD-020-021)


Power supply : 12 Vdc (supplied by the controller)


Entry : dry contact

Reading distance : up to 50 m with optional antenna

Antenna 433MHz in option (Part number : FD-500-025)


REC433 RF receiver is used with Passan controller. It is designed to received a radio signal from a remote control FD-010-015. No

A led called ‘environment’ gives you information about the electromagnetic environment. When the led is off, there is a high quality RF reception. But when the light is on, the environment has electromagnetic disturbances.

A led indicates when the RF reader received a signal from a FDI RF transmitter.Another led indicates if there is a good communication between reader and controller.

ANT+B-B+LDL-L+ ANT-

pont

Rec OK

Environment

Antenne HF 433MHz en option

L+

L-

LD

The mushroom reader 125KHz is small, vandal resistant and waterproof, which makes it ideal for external applications.

The reader can easily be installed on any type of panels. It adapts to all drill diameter 25mm.

RECEIVERS 433MHZ


GB-025-072 PASSAN NETWORK KEYPAD - 3 WIRES

Dimensions (H x L x D) : 134mmx80mmx33mm

Surface mount

Power supply : supplied by Passan controller

Door control relay on Passan controller

Backlit

IP-55 rated

Buzzer


Passan Premium Keypad is a keypad with 12 buttons with a one piece frame casting vandal resistant and 33mm thick.It allows to program up to 2700 access codes (from 3 to 8 digits) through the

screws (assembly tools included).

Functioning :In stand by mode, the led is red indicating that the door is secured. When a valid code is entered followed by the # key, the led turns green indicating that

-lowed by a warning sound indicating that the door remains closed.

KEYPAD READERS

FD-025-081 I3 STAINLESS STEEL BACKLIT KEYPAD - 3 WIRESDimensions (L x H x D): 135mmx100mmx43mm.Flush mount. Stainless steel frame 2,5mm thick.Large backlit Braille buttons diameter 16mm, blue leds.Removable terminal connections, led and operation buzzer.Rain hood to adapt it as surface mount in option (pn: 60-030-277).Power supply : via the controller A

cces

sori

es

The I3 keypad is DDA compliant and has advanced features such as a clock input to manage code group or monostable and bi-stable modes by code.

On the other hand, this keypad offers two relays plus one open collector output.Finally, by its anti vandal appearance, this keypad is suitable for multiple residential and commercial applications.

Acc

esso

ries

D D A C O M P L I A N T

62/63

READERS 13.56MHZ

FD-020-086 VANDAL RESISTANT SURFACE MOUNT READER 13.56MHz - 2 WIRES


Power supply : 12V CC (supplied by the controller)

Current : 50mA

Reader connection <-> Controller : 2 wires / 100m max



Buzzer

The mullion reader is a proximity reader 125KHz working with Ciprox and Vitwo controllers. It sits directly on a wall without embedded box. It offers a

Functioning :A two-color led indicates the operating status of the reader: red to indicate that the reader is in use and green when the door is controlled and give the permission to enter.

The vandal resistant surface mount reader is a 13.56MHz proximity reader used with Vitwo controllers. Elegant and durable, it is ideal for indoor and outdoor installations.

Functioning :Led of the reader is red when it is ready to read a proximity key. When a key is presented

turns green during the door release time programmed.

FD-020-081 MULLION READER 13.56MHz - 2 WIRES



Current : 100mA




L+ L-

L+

L-


FD-020-007 OEM 40X40 READER 13.56MHz - 2 WIRES



Current : 50mA



Operating temperature : -20°C to 70°C

5

Functioning :Led of the reader is red when it is ready to read a proximity key.

key is refused and if the key is valid the led turns green during the door release time programmed.

Acc

esso

ries

FD-020-017 SINTHESI READER 13.56MHz - 2 WIRES


Reader with Sinthesi frame.



FD-020-132 SINTHESI STEEL READER 13.56MHz - 2 WIRES


Reader with Sinthesi Steel frame.



FD-020-016 STAINLESS STEEL READER 13.56MHz - 2 WIRES

Frame dimensions (H x L): 110mmx110 mm.

Embedded box dimensions (H x L x D): 94mmx94mmx30mm.

Installed in an embedded box with 316L stainless steel front.

Fixed by vandal resistant screw.



IP-53 rated.

Acc

esso

ries

64/65

READERS 13.56MHZFD-030-065 MUSHROOM READER 13.56MHz - 2 WIRES (with Vigik)

GB-020-140 MUSHROOM READER 13.56MHz - 2 WIRES (without logo)

Dimensions : diameter 34mm, high 30 mm

Ideal for renovation (drill diameter 25mm)


Reader connection <-> Controller : 2 wires / 100m max (for FD-030-065)

Reader connection <-> Controller : 2 wires / 20m max (for GB-020-140)


IP 53 rated


The mushroom reader 13.56MHz is a compact and vandal resistant reader which al-lows reading of proximity keys for residents et proximity card VIGIK for external agent (La Poste ,EDF-GDF, France Télécom…)

Waterproof, this reader is ideal for an outside use. This reader can easily by install on

FD-020-135 / FD-020-139 P60 READER 13.56MHz - 2 WIRES

Dimensions : 78mmx78mmx18mm

Surface mount or suitable for standard electric backbox




IP 53 rated



RECEIVERS 868MHZ

FD-020-023 RF RECEIVER 868MHz - 2 WIRES

(Exists in 433MHz part number. FD-020-022)




Entry : dry contact

Reading distance : up to 50 m with optional antenna

Antenna 868MHz in option (Part number : FD-500-025)


ANT+B-B+L-L+ ANT-

pont

Rec OK

Environment

Antenne HF 868MHz en option

L+

L-

REC868 RF receiver is used with Vitwo controller. It is designed to receive a radio signal from a remote control FD-010-048.

A led called ‘environment’ gives you information about the electromagnetic environment. When the led is off, there is a high quality RF reception. But when the light is on, the environment has electromagnetic disturbances.

A led indicates when the RF reader received a signal from a FDI RF transmitter.Another led indicates if there is a good communication between reader and controller.

1104/514 868MHz RF READERRECEPTEUR REC868

Acc

esso

ries

Acc

esso

ries

Antenna RF 868MHz

in option

66/67

WIEGAND READERS AND RECEIVERS

Full range of Wiegand readers and receivers

Compatible with all the controllers compatible with Wiegand

protocol.

Customization possible (26, 32, 34 bits etc) on request.

Work with proximity keys FD-010-012, dual technology remote

controls FD-010-015 and ISO cards FD-010-070.

Maximum distance for wiring between the controller and the

reader : 100m

Wire gauge : 5 wires to the controller.

Operating temperature : -20°C to 60°C.

Wiegand is a standard protocol. Wiegand readers are compatible with most of access control systems that accepts 30 bits. They are used with FDI keys. FDI can develop upon request readers in 26 bits, 32 bits, 34 bits or more. Do not hesitate to contact us!

FDI Wiegand readers make the site administration easier with a unique key solution. Using the RF receiver to allow vehicles access to a car park, it is possible to use the remote dual-technology FDI with its built-in proximity tag to use with proximity readers.

Wiegand receivers need to be connected to controllers that are compatible with Wiegand protocol. The serial number of the remote must be entered only once into the controller.


Any

Controller 30 Bits

Wiegand Input

FDI Wiegandreceiver

FDI Wiegand proximity reader

FD-020-085 Wiegand vandal resistant surface mount reader 125KHz - 30 BITSGB-020-098 Wiegand vandal resistant surface mount reader 13.56MHz - 34 BITSDimensions (H x L x D) : 100mmx45mmx16mmPower supply : 12 VdcReading distance : up to 15 mmWire gauge : 5 wires / 100m to controller max

FD-020-083 Wiegand mullion reader 125KHz - 30 BITSGB-020-097 Wiegand mullion reader 13.56MHz - 34 BITSDimensions (H x L x D) : 78mmx43mmx17mmPower supply : 12 VdcReading distance : up to 30 mmWire gauge : 5 wires / 100m to controller max

FD-020-047 Wiegand OEM 40x40 reader 125KHz - 30 BITSDimensions (H x L x D) : 60mmx60mmx16mmPower supply : 12 VdcReading distance : up to 40 mmWire gauge : 5 wires / 100m to controller max

FD-020-018 Wiegand Sinthesi reader 125KHz - 30 BITSDimensions (H x L x D) : 85mmx85mmx16mmPower supply : 12 VdcReading distance : up to 40 mmWire gauge : 5 wires / 100m to controller max

FD-020-141 Wiegand Sinthesi Steel reader 125KHz - 30 BITSDimensions (H x L x D) : 85mmx85mmx16mmPower supply : 12 VdcReading distance : up to 40 mmWire gauge : 5 wires / 100m to controller max

FD-020-014 Wiegand stainless steel reader 125KHz - 30 BITSDimensions (H x L x D) : 110mmx110mmx16mmPower supply : 12 VdcReading distance : up to 40 mmWire gauge : 5 wires / 100m to controller max

FD-020-041 Wiegand RF receiver 125KHz - 34 BITSFD-020-038 Wiegand RF receiver 125KHz - 37 BITSDimensions (H x L x D) : 72mmx60mmx12mmPower supply : 12 VdcReading distance : up to 50m with optional antennaWire gauge : 4 wires / 100m to controller maxAntenna 433/868MHz

Acc

esso

ries

Acc

esso

ries

FD-020-137 Wiegand P60 reader 13.56MHz - 34 BITSDimensions (H x L x D) : 78mmx78mmx18mmPower supply : 12 VdcReading distance : up to 30 mmWire gauge : 8 wires / 100m to controller max

68/69

FD-010-070 PACK OF 10 CARDS ISO 125KHz

FD-010-051 PACK OF 10 CARDS ISO 13.56MHz


Technology : 125KHz / 13.56MHz

Engraving of a 8 digits alphanumerical number

Credit card size

Reading distance of 6cm depending on the reader


ISO proximity cards have a unique serial number and are coded in factory, 4 billion combinations are possible. It can be customized with a logo and / or a photo.

Packs of ISO cards FD-010-070 are compatible with all FDI 125KHz readers and packs of cards FD-010-051 are compatible with all FDI 13.56MHz readers.


FD-010-012 PROXIMITY KEYS 125KHz

FD-010-010 PROXIMITY KEYS 13.56MHz


Technology : 125KHz / 13.56MHz

IP68 - IK08 rated

Engraving of a 8 digits alphanumerial number

Counterbore to prevent erasure of the number

Reading distance of 4cm depending on the reader


The proximity keys are IP68 and IK08 rated (waterproof and shock resistance). They have a metal eyelet to be placed on a key ring and contain a code which can

Possibility of personalization by printing or molding of the hull.The proximity keys FD-010-012 are compatible with all FDI 125KHz readers and keys FD-010-010 with all FDI 13.56MHz readers.

PROXIMITY KEYS, ISO CARDSAND REMOTE CONTROLS

FD-010-015 COMBINED REMOTE CONTROL 125KHz/433MHz

FD-010-022 COMBINED REMOTE CONTROL FOR READ AND WRITE MANAGEMENT

FD-010-048 COMBINED REMOTE CONTROL FOR READ ONLY MANAGEMENT


Technology : 125KHz and 433MHz / Prox. HF 13.56MHz and HF 868MHz.

Simplified programming thanks to a common serial N° for proximity and RF

Engraving of a 8 digits alphanumerial number

Average life of the battery : 22000 manipulations

IP54 rated


Thanks to the integrated proximity and two buttons, the remote is adapted to many situations. It is no longer necessary to have a remote plus a key, for example, a button can control a gate, the second one manages the garage door and the proximity is used for pedestrian access.The remote controls are designed to last thanks to a metal eyelet for key ring, the engraving of the serial number

For read only remotes :These remotes are added into the software by entering the engraved N° or presentation of the remote control on an encoder.Only for read and write remotes :

and reinforces your image to the daily lives of users.

Range of modern, ergonomic forms, integration of brands, logos, button icons, we do our utmost to satisfy you.

Contact us for a quote !

n of our utmost to satisfyy

CUSTOMIZATION

A

The remotes have a metal eyelet to be placed on a key ring. It contains a code of 8 hexadecimal words which can A

cces

sori

es A

cces

sori

es

70/71

READERS

Mullion reader Vandal resistant reader

OEM reader

Readers 3 wires

PassanTransit

Readers5 wires

Wiegand or Dataclock

Readers 2 wires

Ciprox V3Easy Door Controller

Readers 2 wires

Ipervoice

Ciprox V2Vitwo IP

125

KH

z12

5 K

Hz

125

KH

z13

.56

MH

z13

.56

MH

z13

.56

MH

z13

.56

MH

z

FD-020-080 FD-020-084 FD-020-006 FD-020-005

GB-020-124 FD-020-142 FD-020-144

FD-020-081 FD-020-086 FD-020-007 FD-020-016

FD-020-118 (terminal)

GB-020-122 GB-020-123 GB-020-126

Wiegand 26 bits FD-020-087



Data/clock FD-020-082








Data/clock

Wiegand 26 bits


Wiegand 34 bits


Wiegand 26 bits

Wiegand 30 bits

Wiegand 34 bits GB-020-097

Data/clock

Wiegand 26 bits

Wiegand 30 bits

Wiegand 34 bits GB-020-098

Data/clock

FD-020-117(terminal) FD-020-093 (pigtail)

Stainless steel reader


Sinthesi reader Sinthesi Steel reader

K Steel reader P60

FD-030-050 FD-020-131 FD-030-048 FD-030-005

FD-020-017 FD-020-132 FD-030-047 FD-030-065 FD-020-139

GB-020-127 FD-020-133 GB-020-140 FD-020-138

Wiegand 26 bits

FD-020-130

Wiegand 30 bits

FD-020-018

Wiegand 30 bits

FD-020-141

Wiegand 26 bits

FD-020-092

Wiegand 30 bits

FD-020-019

Mushroom reader

Wiegand 34 bits

FD-020-137

Reader 8 wires

Acc

esso

ries

Acc

esso

ries

72/73

RECEIVERS AND REMOTE CONTROLS

Receiver 3 wires

Passan

Receiver2 wires

Ipervoice

Vitwo

433

MH

z43

3 M

Hz

868

MH

z86

8 M

Hz

GB-020-020 FD-010-015 (125KHz) FD-010-047 ( 13.56MHz)

GB-020-021 FD-010-021 (125KHz) FD-010-048 ( 13.56MHz)

FD-020-023 FD-010-048 ( 13.56MHz) FD-010-022 (13.56MHz) FD-010-021 (125KHz)

FD-020-022 FD-010-047 (13.56MHz) FD-010-020 (13.56MHz) FD-010-015 (125KHz)

Vitwo LS Vitwo LE Ipervoice


Receivers 4 wires

Wiegand or Dataclock

433

MH

z86

8 M

Hz


Wiegand 30 bits


Data/clock

FD-010-015 (125KHz)


Wiegand 30 bits UG-020-043


Data/clock

FD-010-021 (125KHz) A

cces

sori

es A

cces

sori

es

74/75

BUTTONS

FDI part number GB-500-250 GB-500-252 GB-500-254 FD-500-009 FD-500-010

Front dimensions 40 X 100 60 X 100 90 X 90 40 X 40 60 X 100

Front thickness 15 / 10 15 / 10 15 / 10

Material and Finish

Stainless steel 304L - Brush



Stainless steel Stainless steel

Using place Embbeded electric box diameter 60

Fixing By screw not supplied By screw not supplied By 2 vandal resistant screws supplied + tool

From the rear (nut supplied)

From the front(screw supplied)

Fixing drill 2 x Ø4.3 unmilled 2 x Ø4.3 unmilled 2 x Ø3.5 milled

Type of button NO/NC - Ø19 -Not backlit

NO/NC - Ø19 -Not backlit




Laser engraving «DOOR»

YES YES YES Engraving on request Engraving on request

NOT BACKLIT PUSH BUTTONS

FDI part number GB-500-259 FD-500-260

Front dimensions 60 X 100 without

Front thickness 15 / 10 /

Material and finish Stainless steel 304L - Brush /

Using place /

Fixing By screw non supplied Bolt supplied

Fixing drill 2 x Ø4.3 Unmilled

Type of button NO/NC - Ø25 - backlit NO/NC - Ø25 - backlit

Laser engraving «DOOR»

YES /


BACKLIT PUSH BUTTONS

FDI part number GB-500-257 GB-500-258

Front dimensions 90 X 90 60 X 100

Front thickness 15 / 10 15 / 10

Material and finish Stainless steel 304L - Brush Stainless steel 304L - Brush

Using place Electric embedded box

Fixing By 2 vandal resistant screws + tools

By screw not supplied

Fixing drill 2 x Ø4.3 unmilled 2 x Ø4.3 unmilled

Type of button NO/NF - Ø19 -Not backlit

NO/NF - Ø25 -Not backlit

Laser engraving «DOOR» YES YES

«Braille» YES YES

Green led YES YES

Connected buzzer card YES YES

PUSH BUTTONS FOR IMPAIRED

Acc

esso

ries

Acc

esso

ries

76/77

ELECTROMAGNETIC LOCK

FD-500-227 ELECTROMAGNETIC LOCK WITH MORTICE MOUNT 300 KG

Technical features :- European standards (CE)- Voltage input : 12 VDC / 24 VDC- Power consumption : 12VDC = 480 mA 24VDC = 240 mA- Dimensions L x w x h: • Magnet 226 x 38 x 26.5 mm • Counterplate 180 x 38 x 11 mm- Holding force : 300 kgs (600 lbs)

The product includes :• 1 electromagnetic lock• 1 counterplate• 1 sticker to mount the counterplate

1 counterplate bolt to mount the product.


FD-500-228 ELECTROMAGNETIC LOCK SURFACE MOUNT WITH LED 300 KG


counterplate bolt to mount the product.

• Bracket L shaped (Part number. 60-001-070)• Bracket L and Z shaped kit (Part number. 60-001-068)

FD-500-229 ELECTROMAGNETIC LOCK SURFACE MOUNT WITH LED 550 KG


counterplate bolt to mount the product.

• Bracket L shaped (Part number. 60-001-069)• Bracket L and Z shaped kit (Part number. 60-001-067)

Acc

esso

ries

Technical features :- European standards (CE)- Voltage input : 12 VDC / 24 VDC- Power consumption : 12VDC = 480 mA 24VDC = 240 mA- Dimensions L x w x h: • Magnet 250 x 42 x 25 mm • Counterplate 180 x 38 x 11 mm- Holding force : 300 kgs (600 lbs)- With integrated led and NO/NC contacts

Technical features :- European standards (CE)- Voltage input : 12 VDC / 24 VDC- Power consumption : 12VDC = 480 mA 24VDC = 240 mA- Dimensions L x w x h: • Magnet 266 x 67 x 39 mm • Counterplate 180 x 60 x 13 mm- Holding force : 550 kgs (1200 lbs)- With integrated led and NO/NC contacts

Acc

esso

ries


78/79

PSTN PANELS AND PUSH BUTTON ENTRY PANELS

TH

EE

NT

RY

PA

NE

LS

Pan

els

Pan

els


80/81

GB-601-076 & GB-601-077PSTN PANELS

GB-601-076 AUDIO PSTN PANEL WITH GRAPHICAL DISPLAY (430 x 175mm)

GB-601-077 AUDIO&VIDEO PSTN PANEL WITH GRAPHICAL DISPLAY (430 x 175 mm)

- Stainless steel panel 2.5mm thick including a proximity reader 40*40 13.56 MHz- Works with a standard analog phone line (PSTN or PABX) - In compliance with disabilities act with Braille buttons and speech sinthesis- 1000 users including for each one : . 2 phone numbers . 1 access code . 1 proximity key- Three relays controlled from the phone called- 30000 last events- Advanced functions . Free access on door, time display for scrolling names . Management door contact, door opened too long and forced door

phone number . Management of talk time for each resident . Personalization of logos - Programming with Platel software FD-050-083 (supplied)- Optional : surface mount box and rain hood- Power supply from 12 to 24 VDC or VAC

PSTN panels advantageously replace traditional intercom systems in residential applications either because of long distances between the entry panel and the apartments, either because it is no longer possible to switch cables between the entry panel and each apartment.

In this case, panels calls reach one or several positions and programming of the PABX allows all possibilities in call management.

I N C O M P L I A N C E W I T H D I S A B I L I T I E S A C T

PSTN network

or

2 wires

2 wires

2 wires

2 wires

DOOR

BP

Progamming

software

FD-050-083 PLATEL

- Management of PSTN panels remotely via modem (not supplied).- No limit in quantities of sites and panels.- Setting and complete management of the panels : . Transfer from and to remote panels . Events recovery.- Programming of the keys by manual entry or presentation on the optional encoder GB-500-045.- Exist in French and English (language to choose at the installation).

Pan

els

Pan

els


82/83

PUSH BUTTON PANELS

Top quality stainless steel 316L 2.5mm thick.

Vandal resistant screws.

From 8 to 24 buttons, if special request, ask for availability.

Light table names protected by a polycarbonate 6mm thick and separated from the technical part where the

wiring is.

Stainless steel protection for the speaker.

Push buttons of 15mm diameter.

Available with or without drill for proximity reader.

Possibility to engrave your logo or company name.

Product part number Push buttons Dimensions (mm) Embedded boxFD-600-570 6 322 x 206 302 x 186 x 50

FD-600-571 8 322 x 206 302 x 186 x 50

FD-600-573 10 322 x 206 302 x 186 x 50

FD-600-575 12 322 x 206 302 x 186 x 50

FD-600-577 14 322 x 206 302 x 186 x 50

FD-600-578 16 322 x 206 302 x 186 x 50

FD-600-579 18 522 x 206 502 x 186 x 50

FD-600-580 20 522 x 206 502 x 186 x 50

FD-600-581 22 522 x 206 502 x 186 x 50

FD-600-582 24 522 x 206 502 x 186 x 50

Pan

els

Pan

els

84/85

FDI ACCESS CONTROL OVER THE WORLD...

Residential housing

SLOVAKIA

Rhodes Waterside

AUSTRALIA

Viva Condominium

SINGAPORE


French Ambassy

SLOVAKIA

OUR SALES SUPPORTS...Our web site

Our new web site www.fdimatelec.com is at your disposal to :

. Discover FDI and our distributors.

. Know the news about access control.

Demonstration panels and cases

To present our products, we have connected material such as cases or demonstration panels.

Feel free to contact us for any question.

An online version of our general catalogue

Available on line or upon request.

Trilight Condominium

SINGAPORE

Residential housing

SLOVAKIA

FDI MATELEC

Route de Saint Symphorien

www.fdimatelec.com

Documents

GENERAL CATALOGUE - · PDF fileFDI MATELEC 1 GENERAL CATALOGUE Designer and manufacturer of access control products since 1989, FDI MATELEC controls all its projects from conception