-
LIFT TRUCKS
GENERAL CARGOFORKLIFT TRUCKSROBUST AND COST-EFFECTIVE
-
Terex forklift trucks are part of the comprehensive Terex Port
Solutions (TPS) lift truck product line including reach stackers,
empty container handlers and full container handlers.
Terex forklift trucks are designed for hard service and
maneuverability, even in the most extreme working conditions –
without sacrificing safety or comfort. For the flexible handling of
general cargo or containers, the different variants have lifting
capacities of up to 52 t. For Rollon/Rolloff (RoRo) applications,
operators can use variants with a special low body.
Terex forklift trucks can be fitted with Terex forks in customer
specific dimensions, or with a variety of other load handling
attachments, such as coil lifters, magnets or locking clamps.
They can also be fitted with fixed or telescopic container
spreaders. This means that, in addition to use in harbour
terminals, the machines can also be employed in a variety of other
fields, such as the steel, construction or timber industries.
Advantages A Excellent cargo handling performance thanks to
high-performance and high lifting capacity
A Versatile application thanks to different load-handling
attachments
A Simple operation thanks to ergonomic, compact design
A Safe, stable handling thanks to robust design with low centre
of gravity
A Cost-effective operation thanks to modern, environmentally
friendly drive technology and low maintenance costs
The range of Terex forklift trucks
Models Max. lifting capacity [t]Max. lifting height
[mm]Standard forks width
[mm]
3,500 4,100 5,100 650 1,000 1,150 1,350
FDC 150 15 ✔ ✔FDC 160 16 ✔ ✔FDC 180 18 ✔ ✔FDC 200 20 ✔ ✔FDC 250
25 ✔ ✔FDC 280 28 ✔ ✔FDC 300 30 ✔ ✔FDC 320 32 ✔ ✔FDC 350 35 ✔ ✔FDC
380 38 ✔ ✔FDC 420 42 ✔ ✔FDC 450 45 ✔ ✔FDC 480 48 ✔ ✔FDC 520 52 ✔
✔
FDC 200 forklift truck handles a wide range of cargo with
weights of up to 20 t
FLEXIBLE CARGO HANDLING TEREX® FORKLIFT TRUCKS
2 3
-
Terex® forklift trucks offer highspeed stacking capabilities up
to 5,100 mm with maximum capacities of up to 52 t on the fork.
FDC 150 FDC 160 FDC 180
FDC 280 FDC 300 FDC 320
FDC 420 FDC 450 FDC 480
FDC 200 FDC 250
FDC 350 FDC 380
FDC 520
All dimensions in mm. All capacities in t.
3,50
04,
100
5,10
0
18
32
48
3,50
04,
100
5,10
0
3,50
04,
100
16
30
45
25
38
3,50
03,
500
5,10
0
3,50
04,
100
5,10
0
15
28
42
20
35
52
EXAMPLE PRODUCT DESIGNATION
Maximum lifting capacity in t (52)
The maximum hoist load is shown in the first two digits of the
three-digit model number.
Short product name
fdc 520
The load charts lead you quickly to the Terex forklift truck
model that best suits your handling requirements for general and
heavy project cargo.
STACKING HIGH LOAD CHARTS FOR THE WHOLE RANGE
4 5
-
Models FDC 150 FDC 160 FDC 180 FDC 200 FDC 250 FDC 280 FDC 300
FDC 320 FDC 350 FDC 380 FDC 420 FDC 450 FDC 480 FDC 520
Speeds
Lifting
– laden [m/s] 0.31 0.20 0.20
– unladen [m/s] 0.33 0.26 0.26
Lowering
– laden [m/s] 0.26 0.25 0.25
– unladen [m/s] 0.25 0.21 0.21
Traveling
– laden [km/h] 26 25 24 24 25 24
– unladen [km/h] 28 27 25 25 26 25
Weights
Maxium static front axle load
– laden [t] 34.8 36.5 39.0 41.0 54.6 59.5 62.0 70.0 75.0 77.2
87.9 92.0 96.1 102.7
– unladen [t] 11.0 11.0 11.0 12.0 17.0 15.0 17.5 22.0 23.0 27.0
27.5 28.0 28.5 29.5
Maxium static rear axle load
– laden [t] 3.2 3.5 3.5 5.0 4.4 4.5 6.0 7.0 8.0 7.8 9.6 11.0
10.9 10.3
– unladen [t] 12.0 13.0 13.5 14.0 17.0 18.0 20.5 23.0 25.0 27.0
28.0 30.0 31.5 31.5
Dead weight [t] 23.0 24.0 24.5 26.0 34.0 36.0 38.0 45.0 48.0
54.0 55.5 58.0 59.0 61.0
Capacities and pressures
Fuel tank capacity [l] 290 290 340 340 460 460 460 415 415 500
500 520 605 605
Hydraulic oil tank capacity [l] 315 315 395 395 425 425 425 575
575 600 600 670 800 800
Hydraulic pressure [bar] 160 160 170 170 180 160 160 160 160 170
170 180 180 180
Travel gear
Number of wheels 6 6
Steered / driven axles 1 / 1 1 / 1
Tire sizes 4 x 12.00202 x 12.00204 x 12.00242 x 12.0024
4 x 14.00242 x 14.0024
4 x 14.00242 x 14.0024
4 x 16.00252 x 16.0025
4 x 18.00252 x 18.0025
4 x 18.00332 x 18.0025
Number of gears forward / reverse 3 / 3 3 / 3 4 / 4
State-of-the-art drive trainTerex® forklift trucks offer high
handling performances and reduced operating costs thanks to their
modern design and components. They combine a stateoftheart drive
train with engines and transmissions providing low fuel consumption
and low exhaust emissions with powerful hydraulics and prime axle
components.
Impressive performance dataThe technical specifications below
offer detailed information about the impressive performance of
Terex reach stackers, including stacking capacities, speeds and
weights.
1) not available for model FDC 380
2) only available for model FDC 500
Diesel engines and transmissions for Terex forklift trucksModels
Standard engines Optional engines
FDC 150FDC 160FDC 180FDC 200
Volvo TAD750VE Tier 3 (Stage IIIA)181 kW @ 2,300 rpm952 Nm @
1,500 rpm
Volvo TAD761VE Tier 4i (Stage IIIB) 160 kW @ 2,200 rpm
1,156 nM @ 1,320 rpm
Cummins QSB6.7 Tier 3 (Stage IIIA)142 kW @ 2,400 rpm930 Nm @
1,500 rpm
Cummins QSB6.7 Tier 4i (Stage IIIB)149 kW @ 2,200 rpm929 Nm @
1,400 rpm
Volvo TAD572VE Tier 4f (Stage IV)160 kW @ 2,300 rpm910 Nm @
1,200 rpm
Cummins QSB6.7 Tier 4f (Stage IV)149 kW @ 2,200 rpm929 Nm @
1,500 rpm
Standard transmission Optional transmission
Dana TE 13Speeds, forward / reverse
3 / 3
ZF WG 171Speeds, forward / reverse
3 / 3
Models Standard engines Optional engines
FDC 250FDC 280FDC 300FDC 320FDC 350
Volvo TAD750VE Tier 3 (Stage IIIA)181 kW @ 2,300 rpm952 Nm @
1,500 rpm
Volvo TAD762VE Tier 4i (Stage IIIB) 185 kW @ 2,200 rpm
1,156 nM @ 1,320 rpm
Cummins QSC8.3 Tier 3 (Stage IIIA)183 kW @ 2,200 rpm
1,162 Nm @ 1,500 rpm
Cummins QSB6.7 Tier 4i (Stage IIIB)194 kW @ 2,200 rpm990 Nm @
1,500 rpm
Volvo TAD871VE Tier 4f (Stage IV)185 kW @ 2,300 rpm
1,150 Nm @ 1,160 rpm
Cummins QSB6.7 Tier 4f (Stage IV)149 kW @ 2,200 rpm929 Nm @
1,500 rpm
Standard transmission Optional transmission
Dana TE 17Speeds, forward / reverse
3 / 3
ZF WG 211Speeds, forward / reverse
3 / 3
Models Standard engines Optional engines
FDC 380FDC 420FDC 450FDC 480FDC 520
Volvo TAD1340VE Tier 2 (Stage II)256 kW @ 2,100 rpm
1,770 Nm @ 1,260 rpm
Volvo TAD1360VE Tier 4i (Stage IIIB)1) 256 kW @ 1,900 rpm1,740
nM @ 1,000 rpm
Volvo TAD952VE Tier 3 (Stage IIIA)242 kW @ 2,100 rpm
1,700 Nm @ 1,300 rpm
Cummins QSX11.9 Tier 4i (Stage IIIB)250 kW @ 2,100 rpm
1,250 Nm @ 1,400 rpm
Cummins QSM11 Tier 3 (Stage IIIA)246 kW @ 2,100 rpm
1,674 Nm @ 1,400 rpm
Volvo TAD1171VE Tier 4f (Stage IV)265 kW @ 2,100 rpm1,785 Nm @
950 rpm
Cummins QSL9 Tier 4f (Stage IV)248 kW @ 2,100 rpm
1,424 Nm @ 1,500 rpm
Cummins QSG12 Tier 4f (Stage IV)2)280 kW @ 2,100 rpm
1,969 Nm @ 1,400 rpm
Standard transmission Optional transmissions
Dana TE 32Speeds, forward / reverse
4 / 4
ZF WG 261Speeds, forward / reverse
4 / 4
ZF WG 3112)Speeds, forward / reverse
4 / 4
EFFICIENT DRIVES, HIGH PERFORMANCE TECHNICAL SPECIFICATIONS
6 7
-
FDC 150 FDC 160 FDC 180 FDC 200 FDC 250 FDC 280 FDC 300 FDC 320
FDC 350 FDC 380 FDC 420 FDC 450 FDC 480 FDC 520
Height
H1 Total height, mast fully extended [mm] 5,150 5,150 5,350
5,350 5,700 6,000 6,000 6,300 6,500 7,000 7,500 7,700 7,700
8,000
H2 Max. lifting height on forks [mm] 3,500 3,500 3,500 3,500
3,500 3,500 3,500 4,100 4,100 4,100 5,100 5,100 5,100 5,100
H3 Total height, mast closed [mm] 3,400 3,400 3,650 3,650 4,000
4,300 4,300 4,300 4,500 5,000 5,000 5,200 5,200 5,500
H4 Driver seat height [mm] 2,300 2,300 2,300 2,300 2,400 2,300
2,300 2,700 2,900 3,500 3,500 3,500 3,500 3,500
H5 Cab height [mm] 3,400 3,400 3,400 3,400 3,500 3,500 3,500
3,800 4,000 4,600 4,600 4,600 4,600 4,600
H6 Ground clearance mast closed (unladen) [mm] 250 250 250 250
300 300 300 300 350 350 350 350 350 350
H7 Ground clearance truck (laden) [mm] 400 400 400 400 450 500
500 500 550 550 550 550 550 600
Width
W1 Outer chassis width/ width outer front wheels [mm] 2,500
2,500 2,500 2,500 2,980 3,000 3,000 3,400 3,400 3,800 4,200 4,200
4,200 4,200
W2 Width inner front wheels [mm] 2,270 2,270 2,270 2,270 2,800
2,950 2,950 2,950 2,950 3,150 3,150 3,150 3,150 3,150
W3 Inner chassis width [mm] 1,860 1,860 1,860 1,860 2,160 2,160
2,160 2,530 2,530 2,970 2,970 3,370 3,370 3,370
W4 Width of forks (standard) [mm] 650 650 650 650 1,000 1,150
1,150 1,150 1,150 1,350 1,350 1,350 1,350 1,350
W5 Axel width rear wheels [mm] 2,080 2,080 2,080 2,080 2,100
2,100 2,100 2,550 2,550 2,580 2,580 2,580 2,580 2,580
W6 Width outer rear wheels [mm] 2,470 2,470 2,470 2,470 2,580
2,600 2,600 3,100 3,100 3,100 3,100 3,100 3,100 3,100
Length
L1 Truck length [mm] 5,500 5,550 5,800 5,800 6,350 6,650 6,650
6,800 7,100 7,250 7,750 8,000 8,250 8,550
L2 Front overhang [mm] 1,000 1,000 1,000 1,000 1,050 1,100 1,100
1,150 1,200 1,300 1,300 1,300 1,300 1,350
L3 Wheelbase [mm] 3,750 3,750 4,000 4,000 4,500 4,750 4,750
4,750 5,000 5,000 5,500 5,750 6,000 6,250
L4 Rear overhang [mm] 800 800 800 800 800 800 800 9 00 900 950
950 950 950 950
L5 Distance to fork center [mm] 1,225 1,225 1,225 1,225 1,225
1,225 1,225 1,225 1,225 1,225 1,225 1,225 1,225 1,225
Other dimensions
R1 Front turning radius [mm] 900 900 900 900 1,000 975 975 975
950 1,050 950 975 975 1,000
R2 Rear turning radius [mm] 5,000 5,300 5,600 5,600 6,100 6,700
6,700 6,800 7,000 7,000 7,550 7,800 8,000 8,200
α Angle of inclination (front) [°] 6 6 5 5 5 5 5 5 5 5 5 5 5
5
β Angle of inclination (back) [°] 12 12 10 10 10 12 12 12 12 12
12 12 12 12
F1 Thickness of standard fork [mm] 100 100 100 100 110 110 110
110 110 120 135 150 150 150
F2 Width of standard fork [mm] 220 220 220 250 250 250 270 300
300 300 300 300 300 300
F3 Length of standard fork [mm] 2,450 2,450 2,450 2,450 2,450
2,450 2,450 2,450 2,450 2,450 2,450 2,450 2,450 2,450F4 Forks front
adjustment [mm] +/ 410 +/ 410 +/ 410 +/ 450 +/ 450 +/ 450 +/ 450 +/
450 +/ 450 +/ 450 +/ 450 +/ 450 +/ 450 +/ 450
The Terex® general cargo forklift truck product line comprises
fourteen models with lifting capacities from 15 to 52 t for great
flexibility.
With a two mast stage design, these models reach lifting heights
up to 5.1 m. The forks can be adjusted quickly up to +/ 450 mm and
can be equipped with dedicated lifting gear to handle any kind of
general cargo.
H1
H2
H3
H4
H5
H6
H7
α β
L1
L3L5 L2 L4
W1
W2
W3
W4
R1R2
W5
W6
Terex® forks
F4
F2
F3
F1
COMPACT DESIGN MAIN DIMENSIONS
8 9
-
SUITED TO YOUR NEEDSSTANDARD AND OPTIONAL EQUIPMENT
EquipmentSection Standard Option
Control systems
Motronica® Vehicle Management System ✔Antitipping device ✔Rear
parking sensors ✔Rear camera ✔Full vision system ✔Cab
Ergonomically designed, soundproofed cab(noise level ≤ 75 dB(A))
✔
Tilting cab (for models FDC 150 – 280) ✔
Rear mounted cab ✔Driver seat belt ✔Air suspension seat ✔Trainer
seat ✔Air conditioning and heating system ✔CD audio system ✔Terex®
forks and lifting gears
Forks mounted fixed spreader 20‘(for models FDC 250 – 350) ✔
Forks mounted fixed spreader 40‘(for models FDC 380 – 450) ✔
Hydraulic forks mounted spreader 20‘ – 40‘light version (for
models FDC 250 350) ✔
Hydraulic forks mounted spreader 20‘ – 40‘heavy version (for
models FDC 380 520) ✔
Inverted forks beam(for models FDC 320 450) ✔
Inverted forks ✔
Section Standard Option
Additional design features
Lighting
– Bulb traffic and working lights ✔– LED traffic and working
lights ✔– Additional LED working lights ✔Tires
– Tubeless pneumatic tires ✔– Superelastic tires ✔– Spare tire
✔– Tire pressure display ✔Others
Automatic greasing for chassis, and mast ✔Low temperature kit
✔Fire suppression system ✔Heated rear view mirrors ✔Emergecy
steering pump ✔Load moment indicator ✔Rear hydraulic compensators
✔Dry disc breakes on steering axle ✔
Terex® forklift trucks are designed for a large variety of
general cargo handling and can be easily equipped with various
lifting gear to handle steel products, pelletized goods, bags and
much more, quickly, safely and eco nomically.
In order to further increase the operability and efficiency of
the Terex forklift trucks, TPS also offers a large number of
options in addition to the standard equipment.
More information about additional options on request.Based on
individual needs, we can supply lifting gear.
Working hand in handIn many multipurpose and specialized
terminals Terex® forklift trucks work hand in hand with Terex®
Gottwald harbour cranes – an example of how TPS offers solutions
for the whole general cargo logistic chain, from the quayside to
the warehouse.
Terex forklift trucks handle containers with spreader or forks
...
... in addition to a large variety of general cargo ...
... including steel withA forksA clambsA magnetsA coil
mandrel
10 11
-
AROUND THE CLOCK, AROUND THE WORLD,AROUND YOUR BUSINESS LIFE
CYCLE SUPPORT
Global support on a local levelWe are committed to keeping your
equipment in service to increase your return on investment. Whether
support comes from a local distributor or direct from the factory,
operators can depend on Terex Port Solutions.
A Erection and commissioning A Maintenance team and operator
training A Parts management A Inspection and maintenance A
Refurbishment and upgrades A Repairs A Fleet management A
Relocation
www.terexportsolutions.com
TEREX OPERATIONS ITALY srlVia Cisa Ligure 51/A, 42041 Lentigione
di Brescello (RE), ItalyPhone: +39 0522 967444Fax: +39 0522
[email protected] www.terexportsolutions.com
Effective date: June, 2014. Product specifications and prices
are subject to change without notice or obligation. The photographs
and/or drawings in this document are for illustrative purposes
only. Refer to the appropriate Operator’s Manual for instructions
on the proper use of this equipment. Failure to follow the
appropriate Operator’s Manual when using our equipment or otherwise
failure to act responsibly may result in serious injury or death.
The only warranty applicable to our equipment is the standard
written warranty applicable to the particular product and sale and
Terex Port Solutions makes no other warranty, express or implied.
Terex, the Terex Crown design, Terex Gottwald, Motronica and Works
For You are trademarks of Terex Corporation or its subsidiaries.
All other trademarks are property of their respective owners. ©
2014 Terex Corporation.
TPS
FLT
TD
EN
02
Our skilled service team is always close to you and enables you
to exploit the full potential of your equipment and boost your
productivity
