11.5.1

TABLE OF CONTENTS

GENERAL AND DOWNSPOUT DETAILS......................................................................3WS0010PE – Panel Profiles.........................................................................3GA0041 – Nucor Accent Wall™ – Erection Notes........................................4GA0051 – Nucor Classic Wall™ – Erection Notes .......................................5GA0061 – Nucor Reverse Classic Wall™ – Erection Notes.........................6GA0130 – Standard Downspout “S” .............................................................7GA0300 – Standard Connector Box .............................................................8GA0150 – Standard Downspout With Collector Box Assembly....................9GA0170 – Standard Downspout @ Eave Overhang ..................................10

BASE CONDITION DETAILS .......................................................................................11STANDARD FINISHED FLOOR DETAILS..........................................................11

GB0010 – Base Angle Trim........................................................................11GB0020 – Base Angle with Trim ................................................................12GB0030 – Base Channel with Trim ............................................................13GB0031 – Hot-Rolled Base Channel with Trim ..........................................14GB0040 – Base Angle with Alternate Trim .................................................15GB0050 – Base Channel with Alternate Trim.............................................16GB0051 – Hot-Rolled Base Channel with Alternate Trim...........................17

STANDARD ABOVE FINISHED FLOOR DETAILS.............................................18GB0100 – Base Angle with Trim AFF.........................................................18GB0110 – Base Channel with Trim AFF ....................................................19GB0120 – Hot-Rolled Base Channel with Trim AFF ..................................20

STANDARD CONCRETE NOTCH DETAILS ......................................................21GB0200 – Concrete Notch with Base Angle and Panel .............................21GB0210 – Concrete Notch with Base Channel and Panel .........................22GB0220 – Concrete Notch with Hot-Rolled Base Channel and Panel .......23

CORNER DETAILS.......................................................................................................24GC0021 – Outside Corner @ Nucor Classic Wall™ Panel .......................24GC0051 – Inside Corner @ Nucor Classic Wall™ Panel ..........................25GC0011 – Outside Corner @ Nucor Accent Wall™ PANEL ......................26GC0041 – Inside Corner @ Nucor Accent Wall™ PANEL .........................27GC0031 – Outside Corner @ Nucor Reverse Classic Wall™ Panel.........28GC0061 – Inside Corner @ Nucor Reverse Classic Wall™ Panel............29

11.5.2

GC0041 – Inside Corner @ Nucor Accent Wall™ PANEL .........................27GC0031 – Outside Corner @ Nucor Reverse Classic Wall™ Panel.........28GC0061 – Inside Corner @ Nucor Reverse Classic Wall™ Panel............29GC0081 – Inside Transition Corner With “Classic Wall” @ Masonry Wall or Existing Building (Jamb Trim).....................................................................30GC0071 – Inside Transition Corner With Accent Wall Panel @ Masonry Wall or Existing Building (Jamb Trim).........................................................31GC0091 – Inside Transition Corner With Reverse “Classic Wall” @ Masonry Wall or Existing Building (Jamb Trim)..........................................32

FRAMED OPENING DETAILS .....................................................................................33GD0005 – CEE Channel Cover Trim Detail ...............................................33GD0040 – Door Framed Opening Trim ......................................................34GD0070 – Window Framed Opening Trim .................................................35

LAST REVISIONDATE: 02/16/15BY: AK CHK: EGB

DETAIL NAME IF APPLICABLEWS0010PE.DWG 11.5.3

GENERAL AND DOWNSPOUT DETAILS

WS0010PE – PANEL PROFILES

LAST REVISIONDATE: 09/20/11BY: RT CHK: EGB

DETAIL NAME IF APPLICABLEGA0041.DWG 11.5.4

GA0041 – NUCOR ACCENT WALL™ – ERECTION NOTES

LAST REVISIONDATE: 09/20/11BY: RT CHK: EGB

DETAIL NAME IF APPLICABLEGA0051.DWG 11.5.5

GA0051 – NUCOR CLASSIC WALL™ – ERECTION NOTES

LAST REVISIONDATE: 09/20/11BY: RT CHK: EGB

DETAIL NAME IF APPLICABLEGA0061.DWG 11.5.6

GA0061 – NUCOR REVERSE CLASSIC WALL™ – ERECTION NOTES

LAST REVISIONDATE: 12/04/17BY: KMC CHK: AES

DETAIL NAME IF APPLICABLEGA0130.DWG 11.5.7

GA0130 – STANDARD DOWNSPOUT “S”

LAST REVISIONDATE: 12/04/17BY:KMC CHK: AES

DETAIL NAME IF APPLICABLEGA0300.DWG 11.5.8

GA0300 – STANDARD CONNECTOR BOX

LAST REVISIONDATE: 12/04/17BY: KMC CHK: AES

DETAIL NAME IF APPLICABLEGA0150.DWG 11.5.9

GA0150 – STANDARD DOWNSPOUT WITH COLLECTOR BOX ASSEMBLY

LAST REVISIONDATE: 12/04/17BY: KMC CHK: AES

DETAIL NAME IF APPLICABLEGA0170.DWG 11.5.10

GA0170 – STANDARD DOWNSPOUT @ EAVE OVERHANG

LAST REVISIONDATE: 05/13/16BY: SAA CHK: EGB

DETAIL NAME IF APPLICABLEGB0010.DWG 11.5.11

BASE CONDITION DETAILSSTANDARD FINISHED FLOOR DETAILSGB0010 – BASE ANGLE TRIM

LAST REVISIONDATE: 04/11/18BY: SDF CHK: EGB

DETAIL NAME IF APPLICABLEGB0020.DWG 11.5.12

GB0020 – BASE ANGLE WITH TRIM

LAST REVISIONDATE: 04/11/18BY: SDF CHK: EGB

DETAIL NAME IF APPLICABLEGB0030.DWG 11.5.13

GB0030 – BASE CHANNEL WITH TRIM

LAST REVISIONDATE: 04/11/18BY: SDF CHK: EGB

DETAIL NAME IF APPLICABLEGB0031.DWG 11.5.14

GB0031 – HOT-ROLLED BASE CHANNEL WITH TRIM

LAST REVISIONDATE: 05/13/16 BY: SAA CHK: EGB

DETAIL NAME IF APPLICABLEGB0040.DWG 11.5.15

GB0040 – BASE ANGLE WITH ALTERNATE TRIM

LAST REVISIONDATE: 05/13/16 BY: SAA CHK: EGB

DETAIL NAME IF APPLICABLEGB0050.DWG 11.5.16

GB0050 – BASE CHANNEL WITH ALTERNATE TRIM

LAST REVISIONDATE: 05/13/16 BY: SAA CHK: EGB

DETAIL NAME IF APPLICABLEGB0051.DWG 11.5.17

GB0051 – HOT-ROLLED BASE CHANNEL WITH ALTERNATE TRIM

LAST REVISIONDATE: 05/13/16BY: SAA CHK: EGB

DETAIL NAME IF APPLICABLEGB0100.DWG 11.5.18

STANDARD ABOVE FINISHED FLOOR DETAILSGB0100 – BASE ANGLE WITH TRIM AFF

LAST REVISIONDATE: 05/13/16BY: SAA CHK: EGB

DETAIL NAME IF APPLICABLEGB0110.DWG 11.5.19

GB0110 – BASE CHANNEL WITH TRIM AFF

LAST REVISIONDATE: 05/13/16BY: SAA CHK: EGB

DETAIL NAME IF APPLICABLEGB0120.DWG 11.5.20

GB0120 – HOT-ROLLED BASE CHANNEL WITH TRIM AFF

LAST REVISIONDATE: 03/13/15BY: AK CHK: EGB

DETAIL NAME IF APPLICABLEGB0200.DWG 11.5.21

STANDARD CONCRETE NOTCH DETAILSGB0200 – CONCRETE NOTCH WITH BASE ANGLE AND PANEL

LAST REVISIONDATE: 03/13/15BY: AK CHK: EGB

DETAIL NAME IF APPLICABLEGB0210.DWG 11.5.22

GB0210 – CONCRETE NOTCH WITH BASE CHANNEL AND PANEL

LAST REVISIONDATE: 03/13/15BY: AK CHK: EGB

DETAIL NAME IF APPLICABLEGB0220.DWG 11.5.23

GB0220 – CONCRETE NOTCH WITH HOT-ROLLED BASE CHANNEL AND PANEL

LAST REVISIONDATE: 04/14/14BY: AES CHK: RJF

DETAIL NAME IF APPLICABLEGC0021.DWG 11.5.24

CORNER DETAILS

GC0021 – OUTSIDE CORNER @ NUCOR CLASSIC WALL™ PANEL

LAST REVISIONDATE: 04/14/14BY: AES CHK: RJF

DETAIL NAME IF APPLICABLEGC0051.DWG 11.5.25

GC0051 – INSIDE CORNER @ NUCOR CLASSIC WALL™ PANEL

LAST REVISIONDATE: 04/14/14BY: AES CHK: RJF

DETAIL NAME IF APPLICABLEGC0011.DWG 11.5.26

GC0011 – OUTSIDE CORNER @ NUCOR ACCENT WALL™ PANEL

LAST REVISIONDATE: 04/14/14BY: AES CHK: RJF

DETAIL NAME IF APPLICABLEGC0041.DWG 11.5.27

GC0041 – INSIDE CORNER @ NUCOR ACCENT WALL™ PANEL

LAST REVISIONDATE: 04/14/14BY: AES CHK: RJF

DETAIL NAME IF APPLICABLEGC0031.DWG 11.5.28

GC0031 – OUTSIDE CORNER @ NUCOR REVERSE CLASSIC WALL™ PANEL

LAST REVISIONDATE: 04/14/14BY: AES CHK: RJF

DETAIL NAME IF APPLICABLEGC0061.DWG 11.5.29

GC0061 – INSIDE CORNER @ NUCOR REVERSE CLASSIC WALL™ PANEL

LAST REVISIONDATE: 04/14/14BY: AES CHK: RJF

DETAIL NAME IF APPLICABLEGC0081.DWG 11.5.30

GC0081 – INSIDE TRANSITION CORNER WITH “CLASSIC WALL” @ MASONRY WALL OR EXISTING BUILDING (JAMB TRIM)

LAST REVISIONDATE: 04/14/14BY: AES CHK: RJF

DETAIL NAME IF APPLICABLEGC0071.DWG 11.5.31

GC0071 – INSIDE TRANSITION CORNER WITH ACCENT WALL PANEL @ MASONRY WALL OR EXISTING BUILDING (JAMB TRIM)

LAST REVISIONDATE: 04/14/14BY: AES CHK: RJF

DETAIL NAME IF APPLICABLEGC0091.DWG 11.5.32

GC0091 – INSIDE TRANSITION CORNER WITH REVERSE “CLASSIC WALL” @ MASONRY WALL OR EXISTING BUILDING (JAMB TRIM)

LAST REVISIONDATE: 04/14/14BY: AES CHK: KMC

DETAIL NAME IF APPLICABLEGD0005.DWG 11.5.33

FRAMED OPENING DETAILSGD0005 – CEE CHANNEL COVER TRIM DETAIL

LAST REVISIONDATE: 04/14/14BY: AES CHK: KMC

DETAIL NAME IF APPLICABLEGD0040.DWG 11.5.34

GD0040 – DOOR FRAMED OPENING TRIM

LAST REVISIONDATE: 04/14/14BY: AES CHK: KMC

DETAIL NAME IF APPLICABLEGD0070.DWG 11.5.35

GD0070 – WINDOW FRAMED OPENING TRIM