1
– 22 – Defrost Heater Caution: Use care to avoid scratching the finish on unit walls. The defrost heater is a single calrod-type, radiant heater mounted on the evaporator. To remove the defrost heater: 1. Remove the evaporator fan (see Evaporator Fan procedure in the Airflow chapter). 2. Remove 8 screws and freezer ceiling panel. 3. Remove Styrofoam insulation from the bottom of the evaporator drain pan. 4. Loosen evaporator drain hose clamp. 5. Lower left side of evaporator drain pan and slide right side out of drain hose and remove. 6. Disconnect the heater wiring. 7. Remove 2 screws from the left and right heater fasteners. 8. Slide the heater toward the front of the freezer compartment and remove. Styrofoam Insulation Hose Clamp Evaporator Drain Pan Screws Heater

GEMonogramSXSTechManual31 9091 Defrost Heater

Embed Size (px)

Citation preview

  • 22

    Defrost HeaterCaution: Use care to avoid scratching the finishon unit walls.

    The defrost heater is a single calrod-type, radiantheater mounted on the evaporator.To remove the defrost heater:

    1. Remove the evaporator fan (see EvaporatorFan procedure in the Airflow chapter).

    2. Remove 8 screws and freezer ceiling panel.3. Remove Styrofoam insulation from the bottom

    of the evaporator drain pan.

    4. Loosen evaporator drain hose clamp.5. Lower left side of evaporator drain pan and

    slide right side out of drain hose and remove.6. Disconnect the heater wiring.

    7. Remove 2 screws from the left and right heaterfasteners.

    8. Slide the heater toward the front of the freezercompartment and remove.

    StyrofoamInsulation

    Hose Clamp

    Evaporator Drain Pan

    ScrewsHeater