Upload
-
View
228
Download
0
Embed Size (px)
Citation preview
8/2/2019 Gebe005 Aug08 PDF
http://slidepdf.com/reader/full/gebe005-aug08-pdf 1/22
Transormyour bathroom
8/2/2019 Gebe005 Aug08 PDF
http://slidepdf.com/reader/full/gebe005-aug08-pdf 2/22
Creating a modern bathroom
The bathroom is becoming an increasingly important part o
everyday lie and at the same time also a place or relaxation
and unwinding so it should reect a taste in modern design
and give the eeling o spaciousness.
Geberit installation systems are created to ulfl all your ex-
pectations. By replacing the common oor standing toilet you
achieve easy and eective cleaning o the entire bathroom
oor. Geberit technology works reliably, even i you do not
see it. It is saely hidden in the wall and operated only by sty-
lish actuators o various materials, colours and shapes. Make
your bathroom dream come true!
2 Introduction
8/2/2019 Gebe005 Aug08 PDF
http://slidepdf.com/reader/full/gebe005-aug08-pdf 3/22
1. Benefts
Designed to withstand a heavy load
Easy to clean
Accessibility at any time
Dual ush saves water
Optimal use o space
Dierent heights or dierent situations
3Contents
B A
2. Technical part
Duofx
Kombiix and concealed cisterns
3. Actuator plates
8/2/2019 Gebe005 Aug08 PDF
http://slidepdf.com/reader/full/gebe005-aug08-pdf 4/22
Designed to withstand
a heavy load
Geberit concealed installation systems are designed to
enable wall hung toilets. A steel-made ftting rame is a
guarantee that the toilet bowl fxed to the wall will support
anyone. It is strong, even though it hangs. The Geberit rame,
to which the hanging toilet is securely astened, is easy and
ast to install to any wall. Its construction was designed andtested or loads up to 400 kilograms.
4–5 Benefts
8/2/2019 Gebe005 Aug08 PDF
http://slidepdf.com/reader/full/gebe005-aug08-pdf 5/22
Easy to clean
Geberit installation systems not only hide the entire ushing
system in the wall, in addition they allow you to clean the
entire oor beneath it. As the bowl hangs o the wall, the
oor beneath it is easily accessible. The wall hung toilet is in
this respect much more practical and hygienic.
8/2/2019 Gebe005 Aug08 PDF
http://slidepdf.com/reader/full/gebe005-aug08-pdf 6/22
Accessibility at any time
The concealed cistern is blow-moulded in one piece. This
eliminates the risk o leakage, which is o course essential
when using an in-wall installation. Operation components are
accessible at any time. Ater removal o the actuator plate,
the flling valve as well as the ush valve can be removed and
easily replaced without the use o tools.
6–7 Benefts
8/2/2019 Gebe005 Aug08 PDF
http://slidepdf.com/reader/full/gebe005-aug08-pdf 7/22
Dual ush saves water
Flush buttons or two dierent amounts o water are
Geberit’s contribution to water saving. Environmental
protection is also good or your amily budget. The
dual ush system, with buttons or 3 or 6 litres o water,
brings real water savings in every household.
8/2/2019 Gebe005 Aug08 PDF
http://slidepdf.com/reader/full/gebe005-aug08-pdf 8/22
Optimal use o space
A wall hung toilet in combination with a Geberit concealed
installation system does not take up more space than a com-
mon oor standing toilet. On the contrary – a bowl attached
to the wall will give you a eeling o open space. The sanitary
wall hides the cistern, the pipes, drains and connections. This
makes the Geberit installation system with wall-hung toiletsuitable or any space. Big and small. And besides that, you
will fnd extra shel space or storage on top o the cistern.
B A
8–9 Benefts
8/2/2019 Gebe005 Aug08 PDF
http://slidepdf.com/reader/full/gebe005-aug08-pdf 9/22
Dierent heights or
dierent situations
Dierent height rames give solutions or all kinds o bath-
rooms. Even ftting under low windows. The actuator plate
can be either ront operated or top operated.
8/2/2019 Gebe005 Aug08 PDF
http://slidepdf.com/reader/full/gebe005-aug08-pdf 10/22
Installation elements with
concealed cistern or drywall installation
The Geberit pre-wall systems are suitable as all-purpose and
ast installation choice or both new and renovation work in
your bathroom. The Geberit Duofx is optimised or dry wall
installation. Elements or wall-hung WCs are available in
2 standard heights that are all adjustable. There are also
Geberit Duofx installation elements or mounting a washba-
sin, urinal or a bidet.
Duofx
10–13 Technical part
8/2/2019 Gebe005 Aug08 PDF
http://slidepdf.com/reader/full/gebe005-aug08-pdf 11/22
Duoix installation element
or WC with UP300
Element height: 112 cm
Article number: 111.300.00.1
Accessories:
wall astening set -
article number:
111.815.00.1 (standard)
111.835.00.1 (or corner installation)
Duoix installation element
or WC with UP300
(or Balena shower toilets)
Element height: 112 cm
Article number: 111.325.00.1
Duoix installation element or WC
with UP200 or Kappa actuator
plates
Element height: 82 cm
Article number: 111.240.00.1
1045
112
50
100
23
0-20
0
73
18/23
R1 / 2
48
9/11
6
100
12
41
0
816.418
Geberit concealed cisternsor Duox elements
UP300 or actuator plates Samba,
Mambo, Rumba, Twist, Tango, and
Bolero, or actuation rom ront.
UP200 or actuator plates Kappa20
and Kappa50, or actuation rom top
or ront.
8/2/2019 Gebe005 Aug08 PDF
http://slidepdf.com/reader/full/gebe005-aug08-pdf 12/22
V.
I.
Installation stepsI. Mounting the rail
The installation starts with
the mounting o the rail to the
loor, wall and ceiling.
They are the outlines o thewall. When using acoustic
insulating strips between rail
and building, you can prevent
the transmission o noise to
your neighbours.
II. Click in the elements
The elements can be clicked
in place easily and then ixed
to the rail. The rail ensures
that all elements are aligned.With a screwdriver and a spirit
level you can align the ele-
ments vertically.
V. Water supply
Use the remaining ree spaces
o the installation wall to install
the water supply pipes.
The Geberit Mepla water
supply system oers lexibility
making it ideal or such
installation walls.
VI. Clad the elements
Ater doing all the installation
in the wall, you can start
cladding with plasterboard.
Do the installation elements
irst.
Stand-alone The astest installation solution is Geberit Duox. It is a uni-
versal mounting element or inside or in ront o a dry wall, as
well as in ront o massive constructions. In case o the pres-
ence o a brick or concrete wall, the element only needs 4
astening points beore cladding with plasterboard and tiling.
The sel-supporting rame gives stability to the WC bowl. No
bricks are needed. Moving parts are accessible at any time,
without aecting the building structure.
VI.
II.
8/2/2019 Gebe005 Aug08 PDF
http://slidepdf.com/reader/full/gebe005-aug08-pdf 13/22
III. Make the duct
In case o needing a duct up
to the ceiling, special system
studs can be used that can
go up rom the loor to the
ceiling. No additional connec-
tion to the building is needed.
IV. Drainage
The installation wall is ideal
or placing the drainage
pipes, like here with Geberit
HDPE.
VII. Clad the rest
Ater cladding the elements,
clad the remainder o theinstallation wall and ill all the
gaps and holes with a iller
material.
VIII. Assembly of
sanitary ware
The wall is ready or the inalstep. You can it the tiles and
ater that, the sanitary ware.
Rail mountedEspecially when combined with other elements, like or
washbasin or bidet, rail mounting is the ideal solution.
Partial or ull height installation walls, even as internal walls,
rail mounting with Geberit Duox allows you to make an
installation with minimal tools in a very short time using a
rail mounted to the foor, wall and ceiling. The rames are
clicked in place and anchored. The installation wall is idealor placing the water pipe and drainage. The entire system
can be installed using only three tools: metal saw, spirit level
and electric drill. A spin o benet is noise insulation.
VII. VIII.
III. IV.
8/2/2019 Gebe005 Aug08 PDF
http://slidepdf.com/reader/full/gebe005-aug08-pdf 14/22
Kombifx
Installation elements withconcealed cistern or solid
construction
A pre-wall can also be made out o bricks in order to create
stability. The Geberit Kombix is optimised or such a solid
construction. Elements or wall-hung toilets are available in
2 standard heights and 2 installation depths. There are also
Geberit Kombix elements or mounting a washbasin, urinal
or a bidet.
14–17 Technical part
8/2/2019 Gebe005 Aug08 PDF
http://slidepdf.com/reader/full/gebe005-aug08-pdf 15/22
816.418
Kombiix installation element or WC
with UP300
Element height: 108 cm
Installation depth: 12 cm
Article number: without support legs
110.350.00.1
with support legs short
110.340.00.1
Accessories: support legs long –
article number:
457.872.26.1 (86 cm high)
support legs short –
article number:
457.888.26.1 (49 cm high)
Kombiix installation element or WC
with UP700
Element height: 110 cm
Installation depth: 8 cm
Article number: 110.765.00.1
Kombiix installation element or WC
with UP200
Element height: 82 cm
Article number: 110.250.00.1
Geberit concealed cisterns
816.418
UP300 and UP700 or
actuator plates Samba,
Mambo, Rumba, Twist,
Tango, and Bolero.
UP300 or installation
depth 12 cm, actuationrom ront.
Article number:
109.300.00.1
UP200 or actuator plates
Kappa20 and Kappa50.
Installation depth adjust-
able, actuation rom top
or ront.
Article number:
109.201.00.1
UP700 or installation
depth 8 cm, actuation
rom ront.
Article number:
109.765.00.1
Geberit concealed cisterns can beinstalled inside brick walls. They
must be used in combination with a
loor standing toilet. The installation
steps are similar to the installation
with a Kombiix element.
8/2/2019 Gebe005 Aug08 PDF
http://slidepdf.com/reader/full/gebe005-aug08-pdf 16/22
V.
I.
Installation stepsI. Preparation for
construction
The place o uture pre-wall
installation needs to be
marked on the wall, while itis important to consider the
location o appliances as well
as plumbing.
II. Installation of elements
Elements should be simply
hanged with the assistance o
anchor kit. In the lower part it
is ixed with saety clamp.
V. Water supply
For water supply we recom-
mend using Geberit Mepla,
the reliable and lexible multi-
layer system.
VI. Walling the installation
As Geberit Kombiix elements
are not sel-supporting. Instal-
lation elements need to be
careully positioned inside a
brick wall.
Geberit Kombix
Kombix is the solution created especially or solid construc-
tions. Over the years Geberit Kombix has proven itsel as a
very reliable system or pre-wall installations. It has a good
noise reduction quality, highest unctional reliability and is
designed to carry weight up to 400 kilograms. Kombix ele-
ments are available not only or toilets, but also or washba-
sins, urinals and bidets.
VI.
II.
8/2/2019 Gebe005 Aug08 PDF
http://slidepdf.com/reader/full/gebe005-aug08-pdf 17/22
III. Vertical piping
Ater the mounting o the ele-
ments, vertical piping o water
supply and drainage needs to
be installed.
IV. Drainage
Ater the vertical piping you
can connect the element.
For drainage you can use our
polyethylene program Geberit
HDPE.
VII. Installation plastering
Ater installation is walled in,
you can begin plastering.
VIII. Assembly
Ater plastering, you can it the
tiles and install the sanitaryware.
Method o installation
The Kombix element is mounted to a construction wall.
Around the element a wall needs to be built made out o
bricks, to give the toilet its stability and to hide the piping.
VII. VIII.
III. IV.
8/2/2019 Gebe005 Aug08 PDF
http://slidepdf.com/reader/full/gebe005-aug08-pdf 18/22
Attractive actuators appeal
to the senses
Our actuator plates can be distinguished by reliable and
attractive, unmistakable design – Geberit actuators will giveeach bathroom special charm, whether it is dual fush or with
a single fush unction.
Once the Geberit fushing system is installed, the only vis-
ible element will be the stylish actuator plate. Geberit actua-
tors are made in dierent shapes, colours and rom various
materials. Flush buttons or two dierent amounts o water
are Geberit’s contribution to water saving. Environmental
protection is also good or your amily budget. The dual fush
system, with buttons or 3 or 6 litres o water, brings real
savings o water consumption in every household.
18–21 Actuator plates
8/2/2019 Gebe005 Aug08 PDF
http://slidepdf.com/reader/full/gebe005-aug08-pdf 19/22
Samba
Dual fush
Rumba
Single fush
Tango
Single fush
Twist
Dual fush
MamboSingle fush
Bolero
Dual fush
Kappa20
Dual fush
Kappa50Dual fush
8/2/2019 Gebe005 Aug08 PDF
http://slidepdf.com/reader/full/gebe005-aug08-pdf 20/22
115.770.FL.1
115.770.FA.1
115.770.BN.1
115.770.DW.1
115.770.EP.1
115.770.GC.1
115.770.81.1
115.770.11.1
115.770.FK.1
115.770.FN.1
115.770.CG.1
115.770.CP.1
115.750.KB.1
115.750.DT.1
115.760.KA.1
115.760.21.1
115.760.46.1
115.760.GM.1
8/2/2019 Gebe005 Aug08 PDF
http://slidepdf.com/reader/full/gebe005-aug08-pdf 21/22
115.760.DT.1
115.760.HC.1
115.780.KA.1
115.780.45.1
115.780.HC.1
115.751.00.1
115.777.10.1
115.777.21.1
115.777.EP.1
115.777.KB.1
115.777.DK.1
115.777.FB.1
115.228.46.1
115.228.11.1
115.228.BP.1
115.228.BN.1
115.228.FQ.1
115.258.00.1
8/2/2019 Gebe005 Aug08 PDF
http://slidepdf.com/reader/full/gebe005-aug08-pdf 22/22
Geberit International Sales AG
CH-8640 RapperswilSwitzerland
www.international.geberit.com i n t . e
1 1 0 0 3 - 0 6 / 3 .
0