The Vertical Frac Manifold is designed to safely allow for simultaneous frac operations on multiple well pads. Each self-contained unit consists of a customized array of actuated valves, block valves, and frac head outlet and is engineered to safely isolate each well during stimulation. Multiple manifolds can be installed on one skid to accommodate each customer’s specific well site/pad requirements.

Features — • Improved safety

– Less repeated lifting, fewer connection make-ups and line manipulations to reduce risks

– Hydraulic valve allows closing the manifold from a remote, safe distance

– Available block valves reduce overall height and offer fewer connections/potential leak paths

– Double-acting hydraulic actuator with manual override ensures proper flow control and shut off even if hydraulic system has been interrupted

– Self-contained units act as a barrier to hold fluids and prevent environmental issues

• Time-saving efficiencies – Rigged up before frac equipment arrives expedites pad

preparation – Made-up once, eliminating downtime, teardown, and

repositioning of lines while each well on the pad is fractured

GE Oil & Gas

Vertical Frac Manifold

• Economical, compact design – Compact design allows units to be shipped to/from well

site with GE crane trucks reduces freight costs due to no “wide load” permitting

– 4-unit-connecting spools with rotating flange provide adjustability to overcome minor alignment issues

– Factory assembled in two to four-well units or customized per operator’s specific well site/pad requirements

– Frac head designed with four or five outlets allows for enhanced versatility of flow volume control

– Vertically mounted Sandbuster® frac valves save space, reduce hazards and simplify repairs

– Vertical orientation offers better performance over horizontal systems in sanding/greasing operations

• Optional on-site support – Provide 24-hour frac maintenance to operate and

grease valves and to re-torque connections

3-Well Frac Manifold

GE © 2015. All rights reserved.6/15, PC #14-0041

geoilandgas.com/pressurecontrol

Vertical Frac Manifold

Single source supplier advantage — • Crane trucks deliver and place

equipment, eliminating the need to contract a crane to remove individual components from the manifold and pay for costly operating and standby time

• Complete line of wellhead solutions and production trees

• Frac trees and manifold assemblies available for working pressures from 5,000 psi through 20,000 psi

• Frac stack stands engineered for safety

• Self-contained, two- to four-station closing units

• Mobile torque and test units

• Trailer mounted greasing units

295-6478

Vertical Frac ManifoldNominal Size 7-1/16” 10M 7-1/16” 15MMaximum Pump Rate (5.12” Bore)* 61 bbl/min 61 bbl/minMaximum Pump Rate (7.06” Bore)* Up to 116 bbl/min Up to 116 bbl/minMaximum Working Pressure 10,000 psi 15,000 psiTemperature Range -20°F to +250°F (-29°C to +121°C) -20°F to +250°F (-29°C to +121°C)API Specification API 6A API 6AMaterial Class** DD-0,5 and EE-0,5 DD-0,5 and EE-0,5PR2 PR2 PR2 Appendix FService H2S H2SFlanges 7-1/16” 10M 7-1/16” 15MGasket Type Stainless Steel Stainless SteelInlet Connections 7-1/16” 10M 7-1/16” 15MOutlet Connections 4-1/16” 10M 4-1/16” 15MAvailable Connections 3” 1502 or

4” 15023” 2202 Hammer Union or 4” 2202 Hammer Union

Isolation Valves 7-1/16” 10M Manual and Hydraulic Sandbuster® Slab Gate Valves

7-1/16” 15M Manual and Hydraulic Sandbuster® Slab Gate Valves

Dimensions - (Per Unit, L x W x H) 17 ft 10 in x 4 ft x 9 ft 2 in(5.44 m x 1.22 m x 2.79 m)

17 ft 10 in x 4 ft x 9 ft 8 in(5.44 m x 1.22 m x 2.95 m)

* Maximum Pump Rate: Consult Engineering for custom flow rates** Material Class: Additional trims available upon request

Specifications —