-
The LOGIQ 200 PRO Series
-
LOGIQ 200 PRO SeriesThe PRO Series represents outstanding value
for the most discerning professional, delivering increased
productivity and superior diagnostic outcomes for you and your
patients.ProgressProfessionalProductivityProductivityInvestment
ProtectionImage Quality
-
RELAYSCANNERINTERFACE CON 1USC BUS-SHV+SHVSCAN Board CON 2
-
TX DRVP GUN ASSYWATCH DOGINTERFACEPRE AMP\
CROSSPOINTUSC BUSNOVA BUS+THV-THVTBFPGC
-
ACC GENAAFTGCADCCOSMODDSIICUSC BUSNOVA BUSTO MVPPGCRBF
-
Digital Beamformer Catch Axial, Lateral, and
TemporalResolution.
-
Digital BeamformerAuto Wave ShapingAxial ResolutionLateral
ResolutionContrast ResolutionTemporal ResolutionBest B-Mode IQ!Wide
Aperture Technology40MHz Converter3CB(2-5MHz
Probe)Flicker-freeMonitorHigh Precision Digital Beamformer
ATO
-
ATOAcoustic DataLOGIQ200MD PROImage
ProcessorImageAnalysisImageOptimization based on Digital Adaptive
ProcessingATO gives you the bestcontrast resolutionusing One-Touch
on keyboard
-
ATOATOIn secondsLess Operator Dependent Faster... Better Image
QualityConventional Manual Image Optimization2-5 MinutesROI
-
SAPIMAGE SOFTENERFRAME AVERAGEB/M FRONTEND
CONTROLPEAKHOLDALMITPXYMEMORYCRDTFZOOMERXY
ADDRGENNON-INTCONVERTCINECONTROLCINE
MEMORYFIFOXYMEMORYDSPPROGRAMMEMORYUSC
BUSI/FIMAGESTORAGERAMIMAGEDISPLAYCONTROLVIDEOLUTVideoDAC
INTERLACECONVERTVIDDACVIDEODECODERSYNCGENERATOR
NOVA BUSUSC BUSMVP Board
-
ROMRAMRESETCPURTCSUPERI/OIDECTLVRAMAGDCFROM NOVA BUSMSTE
-
HV +/-100V+/- 65 V
-
LV Voltages From System
-
Password : Antony
-
COMPARISION OF LOGIC 200 WITH 200 PRO
Logic 200 AlphaLogic 200 ProMSTMSTDSCMVPESPRBFRTCTBFCONNSCANHV
unitBPHV UNITMONITORNon Interlace Monitor
-
Follow these steps to enter the Service Menu.NoteProbes should
be installed in the port and Blue Shift key should be off before
take these steps.1. Pressing Shift + Ctrl keys and then press the
Shift +s keys, and then Shift + 1 keys.2. Input the PASSWORD and
press Return key.The Service Top Menu will appear on the monitor as
shown in ILLUSTRATION 2--5.Service Utility MENU : Top Menu 99/03/12
09:16:37Current Software Version is 3.0*System
DiagnosisBoard/Program VersionSystem ResetKey Operation
HistoryOption SetInitialize :1 (1:America 2:Europe 3:Asia
4:Japan)System Clock AdjustExit
-
TEST Conditions
-
Follow these steps to exit the Service Menu.1. Press Shift + R
keys. If this step will be performed again, the Service Menu will
be entered again.OR2. Select Exit on the Top Menu, and press Set or
Return keys.The Service Menu will be exited.
Follow these steps to operate the Service Menu.1. Using Arrow
Up/down keys, select one of seven items.2. Press Set or Return
keys.The Service Sub Menu will be appeared or Service Menu will be
operated.NoteResetting the system using the System Reset, to reboot
System, does not affect on the systempresets.
-
Follow these steps to enter the System Diagnosis menu.1. Using
the Arrow up/down keys, select the System Diagnosismenu in the Top
Menu. Refer to the ILLUSTRATION 2--5. The left side of selected
menu, here will be appeared the cursor (*).2. Press Set or Return
keys.The System Diagnosis menu will appear on the monitor as shown
in the ILLUSTRATION 2--6.Service Utility MENU : System Diagnosis
99/03/12 09:16:37Current Software Version is 3.0NAME Time
Status*System test 21 MScan Test 0 MTBF Test 0 MLinear/Convex Path
0 MSector Probe Path 0 MBPHV test 1 MMVP Hardware Test 1 MB mode
Function 1 MB mode Cine 8 MM mode Function 2 MMSTE test 4 MKeyboard
0 MPIOP 1 MMonitor 0 MPower Supply 1 MExitPress ctrl+Xto
-
Failure Codes
-
CAE Convex Probe
-Frequency:5Mhz -Bandwidth: 3.7- 7.4 Mhz -FOV:72deg -Convex
ROC:72mmR -Biopsy guide: AvailableCBF Convex Probe
- Frequency:3.5Mhz - Bandwidth: 2.5 - 5.0 Mhz -FOV:72deg -Convex
ROC:50mmR -Biopsy guide: AvailableLB Linear Probe
-Frequency:3.5Mhz -Bandwidth: 2.5 - 5.0 Mhz -FOV:94mm
LE Linear Probe
-Frequency:5.0Mhz -Bandwidth: 3.7 -7.4 Mhz -FOV:83mm
LD Linear Probe
-Frequency:3.5Mhz -Banswidth: 2.5 -5.0 Mhz -FOV:94mm
MTZ Micro-Convex Probe
-Frequency:6.5Mhz -Bandwidth: 4.3 -8.6 Mhz -FOV:124deg -Convex
ROC:10mmR -Biopsy guide:Available
Wide Range of Probes
-
Wide Range of Probes
-
ERB Micro convex/Linear Array probe-Frequency : 7.0Mh-Bandwidth
: 5.2-11.3Mhz-FOV : 12 deg10L Linear probe-Frequency :
9.0Mhz-Bandwidth : 5.2-11.3Mhz-FOV : 40mmS317 Phased Array Sector
probe-Frequency : 3.5Mhz-Bandwidth : 2.5-5.0Mhz-FOV : 90 deg3Cb
Convex Array Probe-Frequency : 3.5Mhz-Bandwidth : 2.5-5.0Mhz-FOV :
59 degCS Microconvex Array probe-Frequency : 3.5Mhz-Bandwidth :
2.7-4.2Mhz-FOV : 81 degWide Range of Probes
