GB - Wolturnus...1.11 Locking Plate Ø10 f/ Hawk 9202 0000 1025 2 1.12 M6 ISO 10511 A2 9206 1441 0511 2 1.13 Threated Bushing 9535 3012 0070 2 1.14 M6 DIN 439 A2 9106 0002 0439 2 1.15

SPARE PART CATALOGUEfor Hawk

Wolturnus A/S - 2018

GB

Content

Wolturnus - Hawk - Spare Part Catalogue - 20182

TABLE OF CONTENT

1 Spare Part Overview 41.1 Complete Wheelchair .......................................................................................................... 41.2 Back Fitting .......................................................................................................................... 51.3 Rear Axle ............................................................................................................................. 61.4 Frame .................................................................................................................................. 71.5 Footrest ............................................................................................................................... 81.6 Rear Wheel .......................................................................................................................... 91.7 Casters ............................................................................................................................... 101.8 Front Wheels ..................................................................................................................... 111.8 Anti-tip .............................................................................................................................. 131.9 Sideguards ......................................................................................................................... 141.10 Brakes .............................................................................................................................. 151.11 ILSA for Hawk .................................................................................................................. 161.12 Crutch Holder .................................................................................................................. 171.13 Offset Push Handles ........................................................................................................ 181.14 Push Handles ................................................................................................................... 19

2 Adjusting The Wheelchair 202.1 Adjusting Back Height ........................................................................................................ 202.2 Adjusting ILSA .................................................................................................................... 202.3 Folding the Back Down ...................................................................................................... 202.4 Adjusting Folding Angle ..................................................................................................... 212.5 When Adjusting the Backrest ............................................................................................ 212.6 Adjusting Footrest Height .................................................................................................. 222.7 Adjusting Footrest Angle ................................................................................................... 222.8 Adjusting Caster ................................................................................................................ 22


Content

33

CONTENTS

Fig. 1 Adjustment Heigth of Back ............................................................................................ 20Fig. 3 Unlock Backrest ............................................................................................................. 20Fig. 2 Adjustment ILSA ............................................................................................................. 20Fig. 4 Folding Down Backrest .................................................................................................. 20Fig. 5 Unscrew Nut .................................................................................................................. 21Fig. 7 Adjustment the Backrest................................................................................................ 21Fig. 6 Flip locking tap ............................................................................................................... 21Fig. 8 Adjustment of Bolt ......................................................................................................... 21Fig. 9 Footrest Height .............................................................................................................. 22Fig. 10 Footrest Angle .............................................................................................................. 22Fig. 11 Adjustment Casters ...................................................................................................... 22

Spare Part Overview


3

2

1

46

7

5

1.1 Complete WheelchairNo. Item Name Page

1 Back Fitting 52 Rear Axle 63 Frame 74 Footrest 85 Rear Wheel 96 Castor House 107 Front Wheel 11

Info Spareparts writtin in iltalic cannot be brought seperatly unless the name contains following symbol ”*”

1 Spare Part Overview


Spare Part Overview

5

1.1 1.16 1.2 2 1.3 1.4

1.15

1.14

1.13

1.17

1.5 1.6 1.7 1.8 1.9 1.10 1.21.11 1.12

1.2 Back FittingNo. Item Name Stock No. Amount

1 Back Fitting Set f/ Hawk 9535 9999 9004 11.1 M8 DIN 439 A2 9108 0002 0439 41.2 Washer M6 9306 0410 0125 41.3 Nylon Washer M6 9306 0710 0125 41.4 Spring f/ Single Stop Brake 9200 0000 0120 21.5 M6 x 45mm DIN 7984 A2 UFK 9106 4502 7984 21.6 Locking Tap for backfitting - Hawk 9535 2004 0010 21.7 Cap Receiver for for Back Plate 9535 1508 0010 41.8 Locking Pin 9535 4608 0010 21.9 Distance Bushing f/ Back 9535 2515 0080 21.10 Locking Pin Housing 9535 3815 0060 21.11 Locking Plate Ø10 f/ Hawk 9202 0000 1025 21.12 M6 ISO 10511 A2 9206 1441 0511 21.13 Threated Bushing 9535 3012 0070 21.14 M6 DIN 439 A2 9106 0002 0439 21.15 M6 x 16mm DIN 7984 A2 UFK 9106 1602 7984 21.16 M6 x 15mm DIN 7380 9106 1642 7380 41.17 Wire f/back-lock f/foldingback (55cm) 9516 0202 1101 1

2 Locking Plate for Foldable Back 9535 9968 00CC 2

Spare Part Overview


1.3 Rear AxleNo. Item Name Stock No. Amount

1 Rear Axle Set - Hawk 9535 9999 9003 11.1 Konsol for Frame - Male 9535 4830 0060 21.2 Bushing for Frame 9535 3025 0080 21.3 M6 x 20mm DIN 921 Black 9106 2041 0913 41.4 Bushing for For Black Wheel Suspention 9535 2025 0080 21.5 Post-Fix f/ Ø30,8 Tube 9540 3000 0000 21.6 Torque Nut DIN EN ISO 10511 - M 6 - N 9206 1441 0511 81.7 Bracket for Rear Axle - Ø30 mm 9535 6035 0060 21.8 Bracket for Frame - Female 9535 7230 0060 21.9 M6 x 25 mm DIN 921 9106 2541 0912 62 Camber Set - Hawk 9535 9999 90D6 1

2.1 Threaded Bushing for Back Axle 9530 1850 0109 22.2 Nut for Back Axle Bushing 9310 2301 0120 22.3 Back Axle Bushing 9530 2950 0160 22.4 Rear Axle w/ 1 deg. Camber f/Hawk XXX 9730 0240 9071 1Alt. Rear Axle w/ 3 deg. Camber f/Hawk XXX 9730 0240 9070 -Info D = 1 (1 deg.) D = 3 ( 3 deg.) Camper

3 Camber Height Adjustment Set 9535 9999 9001

1.1

1.8

3

1.9

1.9

2.3

1.2

1.3

1.4

1.5

1.6

1.6

1.7

2.1

2.2

2.4


Spare Part Overview

7

1.4 FrameNo. Item Name Stock No. Amount

1 Complete Basis Frame - Hawk xxxx xxxx xxxx 11.1 Plastic Plug Ø25 x Ø17 x 27 9350 2517 2700 21.2 Upper Tube Ø25 xxxx xxxx xxxx 21.3 Shim Bushing Ø27,4 - Ø25- 60 9510 3058 0160 21.4 Post-Fix f/ Ø30,8 Tube 9540 3080 0000 21.5 DIN 921 M6 x 25mm 9106 2541 0912 21.6 Back Brace xxxx xxxx xxxx 11.7 Frame xxxx xxxx xxxx 11.8 Plastic Bushing w/o collar f/ Footrest Ø22,5 9510 2322 0280 22 Seat Tube Set - Hawk 9535 9999 9002 1

2.1 Plastic Plug 9350 2519 1700 42.2 Frame Tube Reinforcement Ø21,8 9535 7021 0060 22.3 M6 x 25 DIN 912 9106 2541 0912 42.4 Bracket for Seat Tube / Outside 9535 2525 0160 22.5 M6 x 20 mm DIN 7991 9106 2041 7991 22.6 Bracket for Seat Tube / Inside 9535 2525 0260 22.7 Balyster Holder Hs (Right side) 9535 4850 0060 1- Balyster Holder Vs (Left side) 9535 4850 0160 1

1.1

1.2

1.3

1.4

2.1

2.2

2.3

2.4 2.5

1.5

1.6

1.7

2.6

2.7

1.8

Spare Part Overview


1.5 FootrestNo. Item Name Stock No. Amount

1 Hawk Footrest 9535 9999 90CC 11.1 DIN 912 M6 x 25 9106 2541 0912 21.2 Plastic Bushing w/ collar f/ Foot support Ø22,5 9510 2521 0280 21.3 Hawk Footrest Tube 9535 9990 00CC 11.4 Bracket f/ Angle Adjustment Footplate Ø19 9515 0002 0115 11.5 Post-Fix f/ Ø25 Pipe 9540 0000 0010 22 Footplate SB 35-37.5 f/ Hawk Set 9535 9999 0170 1

Alt. Footplate SB 40-45 f/ Hawk Set 9535 9999 0070 -2.1 Anti-Slip footrest 35-37.5 9535 9999 0360 1Alt. Anti-Slip footrest 40-45 9535 9999 0260 -2.2 Footplate SB 35-37.5 f/ Hawk 9535 9999 0160 1Alt. Footplate SB 40-45 f/ Hawk 9535 9999 0060 -2.3 Hawk Footrest Reinforcement 9535 9999 0460 12.4 Hex Screw DIN 7991 M6 x 12 9106 1241 7991 22.5 Hex Screw DIN 7991 M6 x 30 9106 3041 7991 2

2.6 Hex Nut ISO 10511 A2 - M6 9206 1441 0511 2

1.1

1.2

1.3

1.5

2.6

2.5

2.4

2.1

2.2

1.4

2.3


Spare Part Overview

9

1.6 Rear WheelNo. Item Name Stock No. Amount

1 Spoke Wheel 22” Set (Inc. QRA) 8510 2210 1009 2incl. Spoke 227 mm 9661 0227 0001 48incl. Nippel 14 mm ABS Plast 9661 0000 0002 48Alt. Spoke Wheel 24” Set (Inc. QRA) 8510 2410 1009 2incl. Spoke 9661 0??? 0001 48incl. Nippel 14 mm ABS Plast 9661 0000 0002 48Alt. Spoke Wheel 25” Set (Inc. QRA) 8510 2510 1009incl. Spoke 9661 0??? 0001 48incl. Nippel 14 mm ABS Plast 9661 0000 0002 48Alt. Spoke Wheel 26” Set (Inc. QRA) 8510 2610 1009 2incl. Spoke 9661 0263 0001 48incl. Nippel 14 mm ABS Plast 9661 0000 0002 48Alt. Spinergy 12 Spokes LX Wheel 24” Set (Inc. QRA) 8535 2410 1C08 1Alt. Spinergy 12 Spokes LX Wheel 26” Set (Inc. QRA) 8535 2610 1C08 1Alt. Spinergy 18 Spokes L Wheel 24” Set (Inc. QRA) 8535 2410 1C09 1Alt. Spinergy 18 Spokes L Wheel 26” Set (Inc. QRA) 8535 2610 1C09 12 Tube - 23 Tire - 24 Pushrim - 22 Quick Release Axle (QRA) Ø½” - 9 9530 0098 0020 2

Alt. Quick Release Axle (QRA) Ø½” - 1 9530 0104 0020 2Info. C = Color: Black = 0, Blue = 2, Red = 3, Yellow = 4, White = 5

1 2 3 4 5

Spare Part Overview


1.1

1.2

1.5

1.6

1.4

1.3

1.7

1.8

4

1.7 CastersNo. Item Name Stock No. Amount

1 Caster Bearing Set 9535 9999 9005 11.1 Caster Housing Cap 9535 5005 0060 21.2 M6 x 25mm DIN 912 9106 2541 0912 81.3 Nut DIN ISO 10511 M12 9212 2241 0511 21.4 Ball Bearing 6001 - 2RS 28-12-8 mm 9410 2812 0001 21.5 Console Housing 9535 4437 0060 21.6 Circlip DIN472 - 28 x 1,2 9202 8010 0472 41.7 Ball Bearing 6902 - 2RS 28-15-7 mm 9410 2815 0001 21.8 Front Wheel Axle 9535 6520 0070 24 Castor Fork 4”/5” x 46 9520 4604 05CC 2


Spare Part Overview

11

1.8 Front WheelsNo. Item Name Stock No. Amount

Aluminium Wheels1 Front Wheel 4 (100x34) alu (std.) XXXX XXXX XXXX 2

Alt. Front Wheel 4 (125x34) alu (std.) XXXX XXXX XXXX -Alt. Front Wheel 4” x 1,5” (105 x 36) Alu Froglegs 9664 0100 0020 -Alt. Front Wheel 5” x 1,5” (125 x 36) Alu Froglegs 9664 0125 0020 -Alt. Front Wheel 6” x 1,5” (105 x 36) Alu Froglegs 9664 0150 0020 -1.2 Cap f/ std. Alu Wheel 9520 3015 0380 4Alt. Cap f/ Froglegs Alu Wheel 9520 3015 0180 -1.3 Bearing 8 x 22 x 7mm Front wheel 9410 2208 0001 41.4 Bushing f/ Frontwheel L 10,2 9520 1210 2160 4

Plastic Wheels2 Front Wheel 4” x 1,5” (105 x 34) Fiber Plastic Black 9664 0100 3400 1

Alt. Front Wheel 5” x 1,5” (125 x 34) Fiber Plastic Black 9664 0125 3400 -Alt. Front Wheel 6” x 1,5” (150 x 34) Fiber Plastic Black 9664 0150 3400 - 2.2 Cap f/ Fiber Plastic Wheel 9520 3015 0280 22.3 Bushing f/ Frontwheel L 10,2 9520 1210 2160 43 Axle Ø8 x 53mm w/bolt 9310 0053 0020 2

3.1 Axle Ø8 x 55mm 9931 0005 5002 0 1

3.2 Bolt M6 x 12 6-KT BH 9910 6126 6000 0 2

2.2

1

2

1.2

1.3

Spare Part Overview


1 2

5

13

14

15

16

3

4

4

17

185

6

7

10 121198


Spare Part Overview

13

1.8 Anti-tipNo. Item Name Stock No. Amount

Anti-tip Complete Set Right 9535 9999 2001 1Alt. Anti-tip Complete Set Left 9535 9999 2002 -1 Post-Fix f/ mounting console f/ Anti-tip - Hawk 9535 6636 0060 12 Plug f/ Pipe Ø25 f/ Anti-tip - Hawk 9535 2725 0060 13 Mounting Plate f/ Anti.tip Hs - Hawk 9535 7746 0060 1

Alt. Mounting Plate f/ Anti.tip Vs - Hawk 9535 7746 0160 -4 DIN 912 A2 M6 x 25 9105 2541 0912 65 Torque Nut ISO 10511-M6-N 9206 1441 0511 36 Spring f/ Anti-tip - Hawk 9535 2420 1000 17 Mounting Console f/ Anti-tip Hs - Hawk 9535 5754 0060 1

Alt. Mounting Console f/ Anti-tip Vs - Hawk 9535 5754 0160 -8 Plug f/ Mounting Console f/ Anti-tip - Hawk 9535 3217 0060 19 Bushing f/ Mounting Console f/ Anti-tip - Hawk 9535 2525 0360 1

10 DIN 921 M6 x 40 --- 40N 9106 4041 0912 111 Circlip DIN 472 - XX x 1.2 920X X010 0472 112 Console f/ Pipe Ø25 f/ Anti-tip - Hawk 9535 6032 0060 113 Pipe Ø25 x 2,0 f/ Anti-tip - Hawk 9535 2599 0070 114 Bar Stick Lock 9511 0001 0120 115 Pipe Ø22 Short f/ Anti.tip 9535 2299 0070 116 Wheel f/ Anti-tip Complete 9664 0030 0001 117 DIN 912 A2 M6 x 20 9105 2041 0912 118 DIN 912 A2 M6 x 16 9105 1641 0912 2

Spare Part Overview


1

6.3

6.2

8

6.1

7

6.4

6.4

2 3 4 5.1

5.2

5.3

1.9 SideguardsNo. Item Name Stock No. Amount

1 Armrest Pad 270 Shifted 9510 0008 0122 22 Armrest Pad 275 9510 0008 0121 -3 Armrest Pad 235 Shifted 9510 0008 0126 -4 Armrest Pad 235 9510 0008 0220 -5 Armrest Holder Set 9535 9999 90CC 1

5.1 Platic Plug Ø22 x Ø18 x 19 Flat* 9350 2218 1800 45.2 M5 x 30 ISO 7380 9106 3042 7380 45.3 Armrest Upright Hs 9535 9930 01CC 1

- Armrest Upright Vs 9535 9930 02CC 16 Sideguard Adjustment Set 9535 9999 9009 1

6.1 Height Adjusting Plate 9535 2205 0060 26.2 Plug for Balyster* 9535 3414 0060 46.3 Plate f/ Mounting Sideguard 9953 7010 0020 26.4 DIN 7991 M6 x 12 9106 1241 7991 27 Dibond Sideguard 9535 9999 0090 28 Balyster f/ Sideguards 160mm - Hawk 9535 9930 00CC 2


Spare Part Overview

15

2 4

5

5

3

1

1.10 BrakesNo. Item Name Stock No. Amount

1 Puch-Action Wheel-Locks 8851 1010 1001 12 Puch-Action Wheel-Locks, Bended Handles 8851 1010 1003 -3 Scissor Wheel-Locks 8851 1020 1009 -4 Puch-Action Wheel-Locks (Fiber Plastic) 8851 1010 1101 -5 Scissor Wheel-Locks Small (Fiber Plastic) 8851 1020 1109 -

Info. Mounting clamp included in all set 9515 0002 0009 2

Spare Part Overview


1.1

1.2

1.3

1.41.3

1.6

1.7

1.5

1.11 ILSA for HawkNo. Item Name Stock No. Amount

1 ILSA f/ Hawk 9511 25XX 0000 11.1 Plastic Plug Ø25 x Ø17 x 27 9350 2517 2700 21.2 ILSA Tube - Upper Part Ø25 9510 2225 0060 21.3 ILSA Tube Insert 9510 3025 0060 41.4 ILSA Spacer - 70mm 9510 9525 0060 2Alt. ILSA Spacer - 50mm 9510 7525 0060 -Alt. ILSA Spacer - 30mm 9510 5525 0060 -1.5 Screw M6 x 16 ISO 7380 9106 1642 7380 41.6 ILSA Tube - Lower Part Ø25 9510 1825 0060 21.7 Shim Ø27,4 - Ø25 - 60 9510 3058 0160

Info. XX = ILSA Spacer


Spare Part Overview

17

1.1

1.9

1.2

1.7

1.8

1.6

1.2

1.3

1.4

1.5

1.12 Crutch HolderNo. Item Name Stock No. Amount

1 Crutch Holder f/ Hawk 9535 0000 3000 11.1 DIN 912 M6 x 25 9106 2541 0912 21.2 2 Part Mounting Clamp Ø19 / Ø25 9515 0002 0009 11.3 Tube f/ Crutch Holder f/ Hawk 9535 0000 3070 11.4 M6 IAO 10511 A2 9206 1441 0511 21.5 Crutch Holder Platform f/ Hawk 9535 0000 3060 11.6 Frame Tube extension 25mm 8121 9900 0001 11.7 Washer DIN 9021/ Ø6.4 9305 6418 9021 21.8 Velcro Cross Strap 8862 1010 1099 11.9 ISO 7380 - M6 x 30 - 30N 9106 3042 7380 2

Spare Part Overview


1.13 Offset Push HandlesNo. Item Name Stock No. Amount

1 Folding Push Handles ”OB” Ø25 x 1,5 9000 0000 0094 22 Height Adjustment Console for Push Handle 9535 9999 9010 1

2.1 Console Height Adjustment Push Handle 9535 9940 0060 22.2 DIN 912 M6 x 25 --- 25N 9106 2541 0912 42.3 Clamp Lever M6 x 20 9110 0620 0110 22.4 Bushing Ø22/Ø25 9535 4030 0080 22.5 Spring Loaded Pin 9511 0001 0120 23 Pipe Drw. No. 11648 2

1

2.2

2.3

2.4

3

2.5

2.1


Spare Part Overview

19

1.14 Push HandlesNo. Item Name Stock No. Amount

1 Tube f/ Push Handles Ø22 Adjustable 9722 0261 6070 22 Height Adjustment Console for Push Handle 9535 9999 9010 1

2.1 Console Height Adjustment Push Handle 9535 9940 0060 22.2 DIN 912 M6 x 25 --- 25N 9106 2541 0912 42.3 Clamp Lever M6 x 20 9110 0620 0110 22.4 Bushing Ø22/Ø25 9535 4030 0080 22.5 Spring Loaded Pin 9511 0001 0120 2

1

2.1

2.2

2.4

2.3

2.5

Adjustability


2.1 Adjusting Back HeightUse an allen key to loosen the bolt. Adjust the height by pulling the upper pole up or down. Retighten the bolt when the correct position has been found.

2 Adjusting The Wheelchair

2.2 Adjusting ILSAUsing an allen key you can adjust the length (position) of the footrest, as illustrated in Fig. 2.

Fig. 2 Adjustment ILSAFig. 1 Adjustment Heigth of Back

Fig. 4 Folding Down Backrest

2.3 Folding the Back DownPull the split out slightly in both sides, by pulling in the string connected to both splits. While having the split pulled out, flip the backrest down.

Fig. 3 Unlock Backrest


Adjustability

21

2.4 Adjusting Folding AngleAdjust the angle of which the back folds, by unscrewing the two nut as illustrated on Fig. 5. Flip the locking tap around as illustrated on Fig. 6. Replace both screw and nut in the aligned holes, then retighten the nut and screw.

2.5 When Adjusting the BackrestWhen doing any of the previously mentioned adjustments and before any type of use, make sure that the bolt (as illustrated on Fig. 8), rest securely on the frame. If the backrest isnt resting the frame, adjust the bolt by lossening the nut and adjust the bolt until it is resting untop of the frame, while in an upright position. Retighten the nut, to secure the bolt.

Fig. 6 Flip locking tapFig. 5 Unscrew Nut and Screw

Fig. 8 Adjustment of BoltFig. 7 Adjustment the Backrest

Adjustability


2.6 Adjusting Footrest HeightTo Adhust the Height of the footrest, loosen the post-fix in on both sides of the wheel chair, and retigthen the bolt, to resecure them.

2.7 Adjusting Footrest AngleTo adjust the angle of the footrest, loosen the two screw as illustrated on Fig. 9 and adjust the angle. Retighten the screw after adjusting the footrest.

2.8 Adjusting CasterUse an allen key to loosen the four bolts as illustrated on Fig. 8. Angle and the front wheel, while making sure the front fork is completly parallel with the ground.

Fig. 9 Footrest Height Fig. 10 Footrest Angle

Fig. 11 Adjustment Casters


Adjustability

23

Kundeservice/Customer ServiceWolturnus A/S

Skalhuse 31 9240 Nibe

Telefon: +45 96 71 71 70 www.wolturnus.com

Mail: [email protected]

Produktion/Production Wolturnus A/S Halkærvej 24B

9240 Nibe

Documents

GB - Wolturnus...1.11 Locking Plate Ø10 f/ Hawk 9202 0000 1025 2 1.12 M6 ISO 10511 A2 9206 1441 0511 2 1.13 Threated Bushing 9535 3012 0070 2 1.14 M6 DIN 439 A2 9106 0002 0439 2 1.15