Gazette · 3 TCO Applications Commonwealth of Australia Gazette No TC19/01, Wednesday, 09 Jan 2019 Description of Goods including the Schedule 4 Item Number Customs Tariff Classification

Commonwealth of Australia Gazette

No. TC19/01, Wednesday, 9 January 2019 Published by the Commonwealth of Australia

TARIFF CONCESSIONS

CONTENTS

TCO Applications ....................................................................................................... 2

TCO Applications Refused ........................................................................................ 8

TCOs Made.................................................................................................................. 9

Local Manufacturer Initiated - TCO Revocation Requests .................................. 10

Local Manufacturer Initiated - TCOs Revoked ...................................................... 11

Intention to Revoke TCOs not used in over 2 years ............................................. 13

TCOs Revoked - Unused for over 2 years ............................................................. 16

The Commonwealth of Australia Tariff Concessions Gazette (the Tariff Concessions Gazette) is free of charge on the link below at: https://www.abf.gov.au/importing-exporting-and-manufacturing/tariff-concessions-system

The Tariff Concessions Administration Section is physically located at 5 Constitution Ave Canberra City 2601. The postal address for correspondence is shown in the relevant forms. Contact details: General Email Inquiries:………………………………[email protected] General Inquiries: (02) 6229 3567 TAPIN help desk: (02) 6275 6534

Cat. No.

ISSN 0813-8389

©Commonwealth of Australia, 2019

https://www.abf.gov.au/importing-exporting-and-manufacturing/tariff-concessions-system

2 TCO Applications Commonwealth of Australia Gazette

No TC19/01, Wednesday, 09 Jan 2019

TCO Applications

CUSTOMS ACT 1901 - NOTICE PURSUANT TO SECTION 269K(1) - APPLICATIONS MADE FOR TARIFF CONCESSION ORDERS

Applications have been lodged for Tariff Concession Orders for the goods described in the following TABLE.

Australian manufacturers who wish to contest the granting of a Tariff Concession Order for the goods described

are invited to lodge a submission in writing in an approved form. Submissions must be lodged within 50 days

of the date of publication of this Notice.

The operative date (Op.) and TC reference number follow the description of goods.

Objections to the making of TCO submission forms are available at

https://www.abf.gov.au/importing-exporting-and-manufacturing/tariff-concessions-system/tariff-concession-order

Contact: Email [email protected]

THE TABLE

Description of Goods including the Schedule 4 Item Number

Customs Tariff Classification General Duty Rate

3506.91.90 ADHESIVE, PIPE LINING, polyurethane, conforming to Australian and

New Zealand standard AS/NZS 4020:2018

Op. 10.12.18 - TC 18243275

Stated Use:

In inversion pipe lining to affix a textile pipe liner to the

pipe being re-lined

Applicant: INTERFLOW PTY LTD

50

5%

3917.39.90 HOSES, spiral wire reinforced, whether OR not drum OR reel

mounted, including ALL of the following:

(a) polyamide inner layer;

(b) thermoplastic polyurethane layer;

(c) burst pressure NOT less than 82 MPa;

(d) working pressure NOT less than 34 MPa,

with OR without ANY of the following:

(i) unions;

(ii) swivels;

(iii) hubs;

(iv) threaded ends

Op. 30.11.18 - TC 18237569

Stated Use:

For transferring fluids and gases in oilfield applications and

for injecting water, gas and cement into oil wells

Applicant: PARKER HANNIFIN (AUSTRALIA) PTY LTD

50

5%

4008.11.00 SHEETING, CELLULAR FOAM, neoprene AND/OR ethylene propylene

diene monomer (EPDM), in rolls, having BOTH of the following:

(a) pressure sensitive adhesive layer;

(b) paper laminate backing

Op. 10.12.18 - TC 18243272

Stated Use:

To make rolls, tapes, seals and insulation

Applicant: TAPE PACIFIC PTY LTD

50

5%

https://www.abf.gov.au/importing-exporting-and-manufacturing/tariff-concessions-system/tariff-concession-order

mailto:[email protected]





6815.91.00 REFRACTORY BRICKS, LADLE, unfired, having BOTH of the following:

(a) calcium oxide content NOT less than 54%;

(b) magnesium oxide content NOT less than 34%

Op. 13.12.18 - TC 18245468

Stated Use:

Bricks used to line ladle that is used to transport molten steel

liquid

Applicant: THE AUSTRALIAN STEEL COMPANY (OPERATIONS) PTY LTD

50

5%

8302.49.00 ARMRESTS, TOILET SUITE, having BOTH of the following:

(a) toiler roll holder;

(b) fittings

Op. 13.12.18 - TC 18245481

Stated Use:

Provide support for elderly or disabled people for transfer on

and off toilet seat

Applicant: CAROMA INDUSTRIES LTD

50

5%

8413.91.90 PARTS, CENTRIFUGAL PUMP, SINGLE VANE SCREW IMPELLER, assembled

OR unassembled, being ANY of the following:

(a) volute casings;

(b) impellers;

(c) impeller flanges;

(d) suction covers;

(e) suction casings;

(f) shims;

(g) liners;

(h) back cones

Op. 13.12.18 - TC 18245487

Stated Use:

Spare replacement parts for single vane screw impeller

centrifugal pumps

Applicant: HIDROSTAL AUSTRALIA PTY LTD

50

5%





8421.29.90 OIL STORAGE TANK CLEANING AND OIL RECOVERY SYSTEM, programmable

logic controlled, including BOTH of the following:

(a) tank cleaning unit, including ALL of the following:

(i) pumps;

(ii) heat exchanger;

(iii) coalescing separators;

(iv) valves;

(v) pipes;

(vi) hoses;

(vii) drives;

(viii) cables,

(b) slop oil separation unit, including ALL of the following:

(i) pumps;

(ii) decanters;

(iii) drives;

(iv) tanks;

(v) pipes;

(vi) valves;

(vii) screw conveyors;

(viii) cables,

with OR without ANY of the following:

(i) control panels AND/OR cabinets;

(ii) nozzles;

(iii) headers;

(iv) filters

Op. 30.11.18 - TC 18236806

Stated Use:

For cleaning tanks and recovering waste oil in oil refineries

Applicant: TOX FREE AUSTRALIA PTY LTD

50

5%

8422.90.00 PARTS, DISHWASHING MACHINE, being heater plate OR element, with

OR without gasket

Op. 11.12.18 - TC 18243829

Stated Use:

Dish drawer dishwasher part

Applicant: FISHER & PAYKEL AUSTRALIA PTY LTD

50

5%

8428.90.00 HANDLING AND STORAGE SYSTEM, including ALL of the following:

(a) steel framed wall table with clamping unit;

(b) steel distribution trolley;

(c) vertical wall magazine

Op. 27.11.18 - TC 18234525

Stated Use:

Designed to handle, store and transport various work pieces

between and after machine functions

Applicant: HOMAG AUSTRALIA PTY LTD

50

5%

8428.90.00 ACCUMULATION TABLES, LOADING AND/OR UNLOADING, VIAL FREEZE DRYER

Op. 30.11.18 - TC 18236802

Stated Use:

For accumulating, switching or loading stable glass or plastic

containers

Applicant: HOSPIRA AUSTRALIA PTY LTD

50

5%

8428.90.00 HOPPERS, SEWAGE SLUDGE PROCESSING, PELLETISING AND DESICCATION

LINE, with internal mesh AND hydrophobic coating

Op. 04.12.18 - TC 18239899

Stated Use:

For sewage sludge processing in a pelletising and desiccation

line

Applicant: MOXIEPEL (AUSTRALIA) PTY LTD

50

5%





8433.59.90 HARVESTERS, PEA AND BEAN, four wheel steering, including ALL of

the following:

(a) threshing drums;

(b) hoppers;

(c) screens;

(d) conveyors

Op. 07.12.18 - TC 18243013

Stated Use:

Harvest peas and beans

Applicant: SIMPLOT AUSTRALIA PTY LTD

50

5%

8438.80.00 BATTER MIXING SYSTEM, including ANY of the following:

(a) finished line rate NOT less than 18 000 kg/hr;

(b) batter infeed rate exceeding 22 800 kg/hr;

(c) receiver AND loss in-weight feeder

Op. 22.11.18 - TC 18232590

Stated Use:

Works in conjunction with the french fries manufacturing line

Applicant: MCCAIN FOODS (AUST) PTY LTD

50

5%

8450.90.00 PARTS, WASHING MACHINE, being ANY of the following:

(a) agitator paddles;

(b) air channel exhausts;

(c) ball sumps;

(d) bands;

(e) condensers;

(f) container returns;

(g) covers;

(h) desktops;

(i) dispenser trays;

(j) dosing devices;

(k) drain gutters;

(l) drums;

(m) ducts;

(n) evaporators;

(o) fascias;

(p) flaps;

(q) frames;

(r) handles;

(s) handle caps;

(t) holders;

(u) hooks;

(v) housings;

(w) inserts;

(x) inverters;

(y) keys;

(z) knobs;

(aa) feet AND/OR levelling feet;

(ab) light guides;

(ac) oscillating units;

(ad) rails;

(ae) retaining plates;

(af) retaining strips;

(ag) shock absorbers;

(ah) supports;

(ai) tubs;

(aj) weights;

(ak) windows;

(al) worktops;

(am) push button caps;

(an) panels

Op. 30.11.18 - TC 18237576

Stated Use:

In the repair of washing and/or drying machines

Applicant: BSH HOME APPLIANCES PTY LTD

50

5%





8467.29.00 BLOWERS AND/OR VACUUM MACHINES, with OR without ANY of the

following:

(a) batteries;

(b) battery chargers;

(c) nozzles;

(d) nozzle assemblies, consisting of BOTH of the following;

(i) nozzles;

(ii) joints,

(e) shoulder straps

Op. 04.12.18 - TC 18238628

Stated Use:

Blowers for cleaning gardens and other domestic areas from

leaves, flowers and plants

Applicant: MAKITA (AUSTRALIA) PTY LTD

50

5%

8536.50.99 ARMRESTS, TOILET SUITE, including ALL of the following:

(a) toilet roll holder;

(b) nurse call button;

(c) fittings

Op. 30.10.18 - TC 18219015

Stated Use:

Provide support for elderly or disabled people for transfer

on and off toilet seat

Applicant: CAROMA INDUSTRIES LTD

50

5%

8537.10.90 LIGHTING CONTROLLERS, WIRELESS, having ALL of the following:

(a) switch;

(b) surge protector;

(c) dimmer;

(d) electricity meter;

(e) radio communication;

(f) micro-controller,

with OR without EITHER of the following:

(i) GPS module;

(ii) motion AND/OR light sensor

Op. 04.12.18 - TC 18239163

Stated Use:

To wirelessly control and monitor lighting fixtures such as

street lights

Applicant: GERARD LIGHTING PTY LTD

50

5%





9405.40.00 LIGHTS, STREET AND/OR PUBLIC SPACE, having ALL of the following:

(a) LED lighting modules;

(b) solar panels;

(c) batteries;

(d) network data log AND performance monitoring

with OR without motion sensors

Op. 11.12.18 - TC 18243821

Stated Use:

Solar power for lighting streets or public places without

connecting to power grid

Applicant: GERARD LIGHTING PTY LTD

50

5%

8 TCO Applications Refused Commonwealth of Australia Gazette


TCO Applications R efused

CUSTOMS ACT 1901

NOTICE PURSUANT TO SECTION 269R(1) - APPLICATIONS FOR TARIFF CONCESSION ORDERS REFUSED

Applications for Tariff Concession Orders for the goods described in the following TABLE have been refused.

THE TABLE


Customs Tariff Classification

3923.30.00 PREFORMED UNEXPANDED BOTTLES, tubular shaped, polyethylene

terephthalate copolymer, having ALL of the following:

(a) inner neck diameter NOT less than 21.55 mm and NOT greater

than 21.90 mm;

(b) neck outer diameter NOT less than 24.15 mm and NOT greater

than 25.10 mm;

(c) overall height NOT less than 87.50 mm and NOT greater

than 89.50 mm;

(d) net weight NOT less than 21.45 grams and NOT greater than

21.95 grams;

(e) intrinsic viscosity NOT less than 0.81 decalitres per gram

Op. 18.07.18 - TC 18160026

Reason for refusal:

Substitutable goods produced in Australia in the ordinary course

of business by Visypet Pty Ltd, Ingleburn, NSW

50

7308.90.00 PARTS, WIND TURBINE TOWER FOUNDATION, being steel cylinders,

having ALL of the following:

(a) plate thickness NOT greater than 100 mm;

(b) diameter NOT greater than 6 200 mm;

(c) height NOT greater than 2 500 mm;

(d) pre-drilled elliptical holes;

(e) cellular rubber band pasted on BOTH inside AND outside of

cylinder surface

Op. 02.08.18 - TC 18169217

Reason for refusal:

Substitutable goods produced in Australia in the ordinary course

of business by Keppel Prince Engineering Pty Ltd, Portland, Vic

50

9 TCOs Made Commonwealth of Australia Gazette


TCOs M ade

CUSTOMS ACT 1901 - NOTICE PURSUANT TO SECTION 269R(1) - TARIFF CONCESSION ORDERS MADE

Tariff Concession Orders have been made for the goods described in the following TABLE.

The operative date (Op.) and TC reference No. follow the description of goods. Local manufacturers of

substitutable goods may request the revocation of TCOs at any time.

THE TABLE


Customs Tariff Classification Last Date of Effect

3402.20.00 LIQUID CAPSULES, LAUNDRY DETERGENT, having a dissolvable film

Op. 02.10.18 Dec. date 19.12.18 - TC 18203743

50

3926.90.90 KEY SHELLS

Op. 12.10.18 Dec. date 04.01.19 - TC 18209070

50

7411.29.00 TUBES OR PIPES, copper alloy, having an iron composition by

weight NOT less than 2%

Op. 25.09.18 Dec. date 20.12.18 - TC 18200453

50

7616.99.00 PANELS, DOME SCREEN, SIMULATOR RIDE, having NOT less than 97%

aluminium content

Op. 27.09.18 Dec. date 19.12.18 - TC 18201409

50

8207.90.00 PRESS RINGS, METALLIC PRESS CONNECTOR PIPE SYSTEM, phosphatised

coated steel, with OR without ANY of the following:

(a) adaptor jaws;

(b) moulded plastic case

Op. 25.09.18 Dec. date 21.12.18 - TC 18200071

50

8301.40.00 LOCKS, SLIDING WINDOW, being ventlocks OR venlocks

Op. 18.09.18 Dec. date 28.12.18 - TC 18195745

50

8301.60.00 PARTS, SLIDING WINDOW LOCK, being ventlocks OR venlocks without

key barrels

Op. 27.09.18 Dec. date 28.12.18 - TC 18201895

50

8430.41.00 SURFACE DRILLING RIGS, hydraulic, track AND/OR skid mountable,

having a rotary drill with OR without ANY of the following:

(i) rod handlers;

(ii) loaders;

(iii) presenters

Op. 15.10.18 Dec. date 04.01.19 - TC 18209367

50

8438.20.00 CHOCOLATE REFINING MACHINE, having NOT less than 2 rollers

Op. 02.10.18 Dec. date 19.12.18 - TC 18203748

50

8526.92.00 GROUND CONTROL STATION, AIRCRAFT, mobile, radio remote

controlled, including ALL of the following:

(a) portable flight case;

(b) pilot operating unit;

(c) engineer operating unit;

(d) antenna;

(e) racks

Op. 10.10.18 Dec. date 04.01.19 - TC 18207609

50

10 Local Manufacturer Initiated - TCO Revocation Requests Commonwealth of Australia Gazette


Local M anufac tur er Initiated - TC O R evocation R equests

NOTIFICATION OF AN AUSTRALIAN INDUSTRY REVOCATION REQUEST - SECTION 269SC(1A) CUSTOMS ACT

An application has have been lodged for revocation of the Tariff Concession Order set out in the following

TABLE.

The Lodgement Request Date shown in the table below is the intended revocation date for the Tariff Concession

Order which will take effect should the application for revocation be successful.

Importations not covered by in-transit provisions may be subject to post action as any decision to revoke an

order is backdated to the date of request for revocation.

THE TABLE


Customs Tariff Classification Lodgement Request Date

8413.50.90 PUMPS, POSITIVE DISPLACEMENT, internal combustion engine OR

electric motor, skid mounted, reciprocating plunger, having ALL

of the following;

(a) output NOT less than 188 l/min and NOT greater than

355 1/min;

(b) operating pressure NOT less than 770 bar and NOT greater

than 1 670 bar;

(c) integral dual helical reduction gearing

Op. 31.08.18 Dec. date 26.11.18 - TC 18186705

50

21.12.18

11 Local Manufacturer Initiated - TCOs Revoked Commonwealth of Australia Gazette


Local M anufac tur er Initiated - TC Os R evoked

CUSTOMS ACT 1901 - NOTICE PURSUANT TO SECTION 269SE(1) - AUSTRALIAN INDUSTRY INITIATED - TARIFF CONCESSION

ORDERS REVOKED

The Tariff Concession Orders for the goods described in the following TABLE have been revoked.

THE TABLE



4802.55.10 PAPER, woodfree, uncoated, exceeding 125 gsm and NOT exceeding

150 gsm

Op. 09.02.16 Dec. date 11.04.16 - TC 1606692

Substitutable goods produced in Australia in the ordinary

course of business by Paper Australia Pty Ltd, Mount Waverley,

Vic. In transit provisions apply

50

08.11.18

4802.55.90 PRINTING PAPER, uncoated, in rolls, having ALL of the following:

(a) weight NOT less than 40 gsm and NOT greater than 50 gsm;

(b) opacity NOT less than 79%;

(c) CIE whiteness NOT greater than 130%

Op. 09.06.10 Dec. date 30.08.10 - TC 1026024




50

08.11.18


150 gsm

Op. 09.02.16 Dec. date 11.04.16 - TC 1606699




50

08.11.18

4802.55.90 PRINTING PAPER, uncoated, wood free, in rolls, white OR cream in

colour, having ALL of the following:

(a) weight NOT less than 40gsm and NOT greater than 45gsm;

(b) an opacity exceeding 84% (Elerepho Test)

Op. 01.01.02 Dec. date 09.01.02 - TC 0107618




50

08.11.18


150 gsm

Op. 09.02.16 Dec. date 11.04.16 - TC 1606701




50

08.11.18


150 gsm

Op. 09.02.16 Dec. date 11.04.16 - TC 1606702




50

08.11.18

4804.29.00 SACK KRAFT PAPER, semi-extensible, bleached, having BOTH of the

following:


(b) stretch at break NOT less than 5.8%

Op. 14.01.09 Dec. date 14.04.09 - TC 0900763




50

08.11.18

12 Local Manufacturer Initiated - TCOs Revoked Commonwealth of Australia Gazette




4804.31.00 SATURATING KRAFT PAPER, unbleached, high wet strength, having

ALL of the following:

(a) 2 min Klemm absorption NOT less than 10 mm;

(b) the following measured by the TAPPI test method:

(i) grammage not exceeding 100g/sqm;

(ii) ash content 0.2-2.0%;

(iii) hot extract pH 6-8%;

(iv) air resistance 0.5-20 s/100mL

Op. 15.04.93 Dec. date 19.03.10 - TC 1013565




50

08.11.18

4804.31.00 PAPER, KRAFT, brown, unbleached, in rolls, having a weight NOT

greater than 30 grams per square metre

Op. 03.09.13 Dec. date 26.11.13 - TC 1329749




50

08.11.18

4804.31.00 PAPER, KRAFT, brown, in rolls, having BOTH of the following:

(a) weight NOT less than 80 grams per square metre;

(b) grease resistance test for paper, on both sides, complying

with Technical Association of the Pulp and Paper Industry

TAPPI T 559 cm-12, Kit Rating 8 OR higher

Op. 03.09.13 Dec. date 26.11.13 - TC 1329750




50

08.11.18

4804.39.00 PAPER, WAXING KRAFT, having ALL of the following:


(b) coloured;

(c) tensile strength NOT less than 1.3 kN/m in machine

direction and 0.8 kN/m transverse direction

Op. 26.05.11 Dec. date 19.08.11 - TC 1116834




50

08.11.18

4804.39.00 PAPER, KRAFT, bleached, in rolls, having a weight NOT greater

than 30 gsm

Op. 26.04.12 Dec. date 09.07.12 - TC 1213438




50

08.11.18

4804.39.00 KRAFT PAPER, stretchable, bleached, having a weight NOT less

than 100 gsm and NOT greater than 150 gsm

Op. 25.07.14 Dec. date 13.10.14 - TC 1425676




50

08.11.18

4804.39.00 SATURATING BASE PAPER, white or artificially coloured

Op. 06.03.98 Dec. date 29.05.98 - TC 9802048




50

08.11.18

13 Intention to Revoke TCOs not used in over 2 years Commonwealth of Australia Gazette


Intention to Revoke TC Os not used i n over 2 years

TARIFF CONCESSION ORDERS (TCOs) NOT USED IN THE PREVIOUS 2 YEARS

The Comptroller-General of Customs is satisfied that the TCOs listed in the table below are no longer required

because, in the 2 years preceding the day of this notice, they have not been quoted in an import declaration

to secure a concessional rate of duty.

From Thursday, 7 February 2019, it is intended to take action to revoke these Orders under subsection

269SD(1A) of the Customs Act 1901. In accordance with subsection 269SG(2) of the Customs Act 1901, in transit

provisions shall apply. If revoked, the expected date of effect will be 7 February 2019.

Interested parties are invited to provide, by close of business, Wednesday 6 February 2019, written reasons

why an Order should NOT be revoked.

Please advise if any of the Orders listed below have been quoted on an import declaration.

If a request is made to retain an Order used for the granting of a Determination, please specify the

Determination and the linked Item number to enable mapping to the Order and its scope.

THE TABLE

______________________________________________________________________________________________________________

Tariff

Classification Description Concession Number

______________________________________________________________________________________________________________

3926.90.90 CAPS, INFILL, FORMWORK, polyamide

Op. 24.03.14 Dec. date 25.06.14 - TC 1410317

7308.90.00 PARTS, FLARE GAS STACK, LNG CONDITIONING, being ANY of the

following:

(a) stack tube segments with OR without internal low pressure

riser sections;

(b) external high pressure riser sections with OR without riser

guide supports;

(c) riser bracing supports;

(d) platforms;

(e) ladders;

(f) handrails

Op. 04.09.14 Dec. date 16.01.15 - TC 1431532

7326.90.90 ASSEMBLIES, DOWNHOLE OIL AND/OR GAS WELL DRILLING EQUIPMENT

CONNECTOR, iron OR steel, whether OR not assembled, including

ALL of the following:

(a) upper connector curved plate;

(b) threaded sleeve;

(c) bottom mandrel

Op. 11.03.14 Dec. date 05.06.14 - TC 1408891

8412.29.00 HYDRAULIC ENGINE SYSTEM, single column drive, having ALL of the

following:

(a) torque exceeding 450 kN.m;

(b) motors;

(c) planetary gearbox;

(d) hydraulic pump

Op. 29.08.14 Dec. date 17.11.14 - TC 1430766

8419.89.90 BLOOD COAGULATORS, ABATTOIR RENDERING AND PROTEIN STERILISATION

SYSTEM

Op. 21.02.14 Dec. date 19.05.14 - TC 1407099



8422.30.90 PACKING MACHINES, VALVE-BAG, BULK MATERIAL, programmable logic

controlled, having ALL of the following:

(a) NOT less than 4 filling stations, having ALL of the

following:

(i) valve-bag placement;

(ii) electronic weighing;

(iii) ultrasonic valve-bag sealing,

(b) bag filling capacity NOT less than 5 kg and NOT

greater than 50 kg;

(c) discharge conveyor;

(d) enclosed filling module

Op. 02.04.14 Dec. date 04.07.14 - TC 1411381

8428.90.00 PARCEL TIPPING AND UNLOADING MACHINES, being EITHER of the

following:

(a) ULD (unit load device) tipper;

(b) pallet tipper

Op. 03.03.14 Dec. date 02.06.14 - TC 1407847

8428.90.00 PLASTIC CARD COLLATING MACHINES, programmable logic controlled,

including ALL of the following:

(a) in-feed trolley module;

(b) out-feed trolley module;

(c) cutters;

(d) colour sensors;

(e) ultrasonic welding heads;

(f) de-ionised air flow module;

(g) air chuck module;

(h) web overlay module;

(i) collation bed;

(j) multi-sheet detection module;

(k) overlay hoist loading module;

(l) core in-feed module;

(m) mobile graphical touch screen control panel;

(n) electrical cabinet

Op. 01.09.14 Dec. date 24.11.14 - TC 1430771

8428.90.00 BEAMS, SPREADER AND LIFTING, PRECAST CONCRETE SLABS OR BLOCKS,

incorporating a manual OR electric motor self-centring gravity

adjustment mechanism

Op. 05.09.14 Dec. date 30.01.15 - TC 1431652

8428.90.00 RAILWAY OR ROLLING STOCK COMPONENTS MAINTENANCE HANDLING PLANT,

automated, with OR without shuttles AND/OR jacks AND/OR kickers

AND/OR receivers AND/OR safety fences and roofs, including ALL

of the following:

(a) gantries;

(b) grippers;

(c) conveyors;

(d) electrical cabinets

Op. 12.09.14 Dec. date 08.12.14 - TC 1432604

8428.90.00 HOPPERS, BULK MATERIALS HANDLING, mobile, ship side, inverted,

having ALL of the following:

(a) dust extraction control AND recovery system;

(b) dust suppression system;

(c) hopper bowl;

(d) stairways AND platforms;

(e) dolly base incorporating an hydraulic system;

(f) control AND electrics cabin;

(g) top valve system;

(h) control boxes;

(i) dust piping;

(j) deflector shield system

Op. 15.09.14 Dec. date 17.12.14 - TC 1432886

8479.89.90 COUPLINGS OR FLANGES, SUBSEA, OIL AND OR GAS WELL, mechanical,

flexible, having an elastomeric bearing

Op. 21.02.14 Dec. date 12.05.14 - TC 1406968



8479.89.90 CARCASE PRE-BREAKERS, ABATTOIR RENDERING AND PROTEIN

STERILISATION SYSTEM

Op. 24.02.14 Dec. date 19.05.14 - TC 1407206

8479.89.90 BLOOD COLLECTION SYSTEM MODULES, being EITHER of the following:

(a) clean-in-place station;

(b) sodium citrate tank

Op. 05.03.14 Dec. date 03.06.14 - TC 1408408

8480.60.00 MOULDS, PRECAST CONCRETE STAIRCASE, adjustable, with OR without

shutters

Op. 08.09.14 Dec. date 01.12.14 - TC 1432001

8504.23.00 TRANSFORMERS, ELECTRICAL, liquid dielectric, having BOTH of the

following:

(a) power handling capacity exceeding 10 000 kVA;

(b) system highest voltage (SHV) NOT less than 500 kV

Op. 14.03.14 Dec. date 05.06.14 - TC 1409388

8529.10.30 ANTENNAS, unassembled, including ALL of the following:

(a) parabolic dish;

(b) reflector panels;

(c) antenna controls;

(d) antenna hub

Op. 26.02.14 Dec. date 19.05.14 - TC 1407329

8544.49.20 CABLES, DOWNHOLE, OIL AND/OR GAS WELL MONITORING SYSTEM, spool

mounted, with OR without polymer encapsulation AND/OR cable end

protectors, including ALL of the following:

(a) insulated stranded conductor;

(b) filler;

(c) stainless steel tubing;

(d) maximum working pressure rating NOT less than 650 bar

Op. 11.09.14 Dec. date 01.12.14 - TC 1432577

8705.90.00 VEHICLES, MOBILE MAMMOGRAPHY BREAST SCREENING, self-propelled,

having BOTH of the following:

(a) truck chassis;

(b) breast screening machines,

including NOT less than ANY four of the following:

(i) shelves;

(ii) cupboards;

(iii) tables;

(iv) sinks;

(v) power outlets;

(vi) power generators

Op. 06.03.14 Dec. date 02.06.14 - TC 1408683

8716.39.00 SLIPWAY TRAILERS, hydraulic, submersible, including ALL of the

following:

(a) length NOT less than 5 m and NOT greater than 40 m;

(b) load capacity NOT less than 15 t and NOT greater than

150 t;

(c) hydraulic lift system;

(d) hot dipped galvanised frame;

(e) hydraulic steering drawbar with telescopic extension

Op. 11.03.14 Dec. date 11.06.14 - TC 1409071

16 TCOs Revoked - Unused for over 2 years Commonwealth of Australia Gazette


TCOs R evoked - U nused for over 2 years

CUSTOMS ACT 1901

NOTICE PURSUANT TO SECTION 269SE(2) - TARIFF CONCESSION ORDER REVOCATION AT THE INITIATIVE OF THE COMPTROLLER-

GENERAL OF CUSTOMS

The Tariff Concession Orders listed in THE TABLE below have has not been used for at least 2 years and have

been revoked under Section 269SD(1A). In transit provisions apply.

The intention to revoke these orders was notified in Gazette TC18/44 dated 14 November.

THE TABLE



3924.10.00 SETS, KITCHENWARE, consisting of NOT less than 3 tongs, having

BOTH of the following:

(a) steel handles;

(b) plastic serving heads

Op. 01.04.11 Dec. date 20.06.11 - TC 1111090

2 Years non use. In transit provisions apply

50

11.12.18

3924.10.00 KITCHENWARE, being magnetic knife blade guards

Op. 11.05.11 Dec. date 25.07.11 - TC 1114757


50

11.12.18

4202.92.90 SETS, RETRACTABLE PET LEASH BAG, having ALL of the following:

(a) dual elastic joining bands;

(b) top and side zip closures;

(c) velcro straps

Op. 11.05.11 Dec. date 25.07.11 - TC 1114754


50

11.12.18

4202.92.90 POUCHES, neoprene, having ALL of the following:

(a) zipper closures;

(b) internal pockets;

(c) carabineer;

(d) weight NOT greater than 60 g;

(e) length NOT greater than 15 cm

Op. 24.06.11 Dec. date 22.02.12 - TC 1138619


50

11.12.18

6909.19.00 CHEMICAL TOWER PACKINGS, glazed ceramic

Op. 21.07.11 Dec. date 12.10.11 - TC 1124692


50

11.12.18

7013.42.00 CONTAINERS, COFFEE MAKING, glass, having BOTH of the following:

(a) pouring lip;

(b) volume capacity NOT greater than 1.1 L

Op. 11.08.11 Dec. date 02.11.11 - TC 1127156


50

11.12.18

7308.90.00 PARTS, MARINE WHARF, being steel pile caps

Op. 16.11.11 Dec. date 30.01.12 - TC 1138231


50

11.12.18





7321.90.00 CABINET AND CHASSIS SUBASSEMBLIES, RADIANT/CONVECTION GAS

HEATER, including NOT less than ANY four combinations of the

following:

(a) air diffusers;

(b) air ducts;

(c) back plates;

(d) covers;

(e) fan ducts;

(f) fan mount plates;

(g) front facia panel;

(h) side supports;

(i) sparker tabs;

(j) top baffle

Op. 16.06.11 Dec. date 05.09.11 - TC 1119277


50

11.12.18

7323.99.00 HOLDERS, PAPER TOWEL, having ALL of the following:

(a) stainless steel towel holder shaft;

(b) weighted steel base;

(c) silicon and stainless steel paper towel stopper

Op. 10.11.11 Dec. date 30.01.12 - TC 1137497


50

11.12.18

7615.10.00 MOULDS, ICE, aluminium

Op. 01.01.12 Dec. date 29.11.11 - TC 1130465


50

11.12.18

8419.89.90 COOLING UNITS, AC MOTOR, ROLLING MILL MAIN DRIVE

Op. 15.11.11 Dec. date 06.02.12 - TC 1138153


50

11.12.18

8419.89.90 OVENS, TINPLATE CURING, including ALL of the following:

(a) gas burners;

(b) metal wickets;

(c) heat circulation boxes and fans;

(d) cooling towers;

(e) stacker

Op. 22.11.11 Dec. date 13.02.12 - TC 1138952


50

11.12.18

8419.90.00 PARTS, PLASTERBOARD DRYING PLANT, being ANY of the following:

(a) dryer module, programmable logic controlled;

(b) conveyor elements;

(c) channels;

(d) rails;

(e) nozzle boxes;

(f) gussets;

(g) tipple feeders;

(h) floor plates;

(i) dryer exhaust ducts AND/OR stacks AND/OR outlets;

(j) inner doors;

(k) side walls;

(l) air recirculation ceiling boxes;

(m) rail templates;

(n) roof panels;

(o) floor and roof edges;

(p) tensioning stations;

(q) burner and fan platforms;

(r) heat recovery module frames;

(s) dryer air inlets;

(t) heat recovery system;

(u) stacking tables;

(v) adjustable stop bars;

(w) recirculation ducts;

(x) edge cooling ducts;

(Continued on next page)

50

11.12.18





(Continued from previous page)

(y) preheat ducts AND/OR stacks;

(z) burner fuel trains;

(aa) burner safety panels;

(ab) blowers

Op. 21.07.11 Dec. date 17.10.11 - TC 1124534


8424.89.90 WATER REGULATORS, SHOWER, having ALL of the following:

(a) ball valve AND venturi combination;

(b) shower rose AND arm;

(c) polycarbonate reservoir

Op. 04.04.11 Dec. date 27.06.11 - TC 1111201


50

11.12.18

8428.90.00 PARTS, ANODE HANDLING AND TRANSFER SYSTEM, CARBON BAKE FURNACE,

being ANY of the following:

(a) straight OR curved conveyors;

(b) elevators;

(c) turntables;

(d) tilters;

(e) conveyor goods up ending AND/OR down ending machines;

(f) dividing arms;

(g) pusher arms;

(h) vibrating hoppers

Op. 03.08.11 Dec. date 28.10.11 - TC 1126049


50

11.12.18

8431.43.00 PARTS, DRILLING MACHINE, being torque drives, including BOTH of

the following:

(a) well casing adjuster;

(b) drill and reamer

Op. 05.05.11 Dec. date 01.08.11 - TC 1114144


50

11.12.18

8479.89.90 PIPE REHABILITATION WINDING MACHINES

Op. 19.05.11 Dec. date 08.08.11 - TC 1116105


50

11.12.18

8479.89.90 SWEEPERS, SUCTION, ride in, having ALL of the following:

(a) two wheel OR four wheel steering;

(b) sweeping width NOT greater than 3 120 mm;

(c) dirt hopper capacity NOT greater than 1.85 m3;

(d) transport speed NOT greater than 50 km per hour;

(e) outer turning radius NOT greater than 3 900 mm;

(f) width NOT greater than 1 320 mm;

(g) height NOT greater than 1 950 mm

Op. 10.08.11 Dec. date 10.11.11 - TC 1127069


50

11.12.18

8481.80.90 DISPENSERS, BEER BOTTLE, consisting of EITHER of the following:

(a) bottle top dispensing head with lever operated tap;

(b) bottle top closure cap, including ALL of the following:

(i) check valve;

(ii) pressurized carbon dioxide cartridge;

(iii) dispensing tube

Op. 16.09.11 Dec. date 05.12.11 - TC 1131717


50

11.12.18





8537.10.90 DOUBLE ADAPTORS, POWER POINT, having ALL of the following:

(a) maximum voltage capacity NOT greater than 1 000 V;

(b) surge protector;

(c) inbuilt timer AND/OR remote control sensors

Op. 24.10.11 Dec. date 16.01.12 - TC 1135623


50

11.12.18

Page intentionally blank

Documents

Gazette · 3 TCO Applications Commonwealth of Australia Gazette No TC19/01, Wednesday, 09 Jan 2019 Description of Goods including the Schedule 4 Item Number Customs Tariff Classification