Gaskets - Custom Chrome · 6 *Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary. Gaskets for Twin Cam Models

Gaskets

Proudly Distributed by

*Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary.2

w w w.customchrome.com 3

State-Of-The-Art in Gasket Technology Definition and ApplicationsMICROPORE technology material is an upgraded, highly permeation resistant sealing technology offering superior sealability at low flange loads in less-than-desirable surface conditions. Exhibits low creep relaxation and strong resistance to crush, eliminating the need to re-torque under normal joint conditions. MicroPore is best suited in demanding cover type applications consisting of cast or stamped metals such as the following cover applications; outer primary, primary inspection covers, cam covers, lifter block covers, and transmission top covers. Additionally, Micropore gaskets provide outstanding sealing robustness in various fuel/air system applications such as; air filter element, and fuel injection filter element gaskets.

HYDRO-FUSED offers high crush resistance, exceptional torque retention, outstanding resistance to blowout and high surface friction on metal flanges. In addition Hydro-Fused gaskets provide resistance to thermally induced scrubbing while providing excellent sealing and load retaining properties. It is an extremely tough, high density, and very durable material designed to seal challenging applications such as cylinder base, and rocker box housings, and some head gaskets. Encore HTX-900 is special use Hydro-fused composite for exhaust and head gasket applications. This material is a graphite coated, high-density non-asbestos fiber/metal reinforced composite for elevated temperature and thermally stressed head gasket application.

SYNTHESEAL is an industry proven, general purpose Nitrile binder and reinforced fiber gasket material used in lower temperature and less difficult sealing environments. It exhibits excellent crush resistance at high flange pressures and compatibility with a wide range of fluids. Syntheseal gaskets are best suited for the following applications; transmission side covers, carburetor, air cleaner backing plate and intake, and transmission bearing housing gaskets. Resin Reinforced and High Tensile Strength fiber gaskets provide excellent erosion and blowout resistance in high-pressure oil pump applications. Tight thickness tolerance permits consistent gear and bearing stack-up.HIGH PERFORMANCE FACING MATERIAL WITH GRAPHITE COATING on Steel Core with Fire Ring is the new standard construction for most of the Motor Factory head gasket applications. This multi-layer fiber/metal reinforced composite head gasket delivers improved combustion sealing strength along with excellent bolt load retention and outstanding resistance to blowout. With the anti-stick properties of the graphite coating, these head gaskets will not stick upon disassembly.

RUBBER COATED STEEL (RCS) provides superior engine sealing to high performance engines, resulting in less maintenance and longer gasket life. RCS is ideal for tight tolerance applications. This material is superior in torque retention and improved conformance to flange finishes with surface imperfections. This material is best suited for rocker box housing gaskets.

FOAM COATED STEEL CORE is a proven technology, ideal for machined and cast surfaces that are uneven. The foam is chemically-blown, and compounded with nitrile synthetic rubber, that is then bonded to an aluminum core. This material has exceptional recovery while maintaining strong torque retention. Proper installation of these gaskets will create a seal that prevents seeping, leaking, and weeping of lubricant fluids, and they will not rip, tear, or wick.

This composite material is used for the Motor Factory 3 hole, and 5-hole solid derby cover gaskets

In the past few years, Motor Factory has recognized the fact that the market’s appetite for higher performance engines with increased displacement and horsepower substantially increases the demands for gasket sealing performance. To meet the wide range of performance needs from stock engines to high compression engines, Motor Factory offers a new line of state-of-the-art gasket material technologies. Below are definitions of the new gasket material composites and their typical applications in the Motor Factory gasket product line. All Motor Factory gaskets are made in the USA.

Old technology

New Micropore technology

GasketsMotor Factory


660492

Motor Factory Engine Gasket Kits for Twin Cam 88 Models State of the art gasket material composites are included in each gasket kit. Listed below are the definitions of the gasket material used. On the back side of each gasket kit will be a content label listing all the gaskets, O-rings and seals contained in each kit. All gaskets are made in the U.S.A.• Headgasketsaremadeofahighperformancefacingmaterialwithgraphitecoatingonsteelcorewithfirering.Thismulti-layerfiber/metal

reinforced composite head gasket delivers improved combustion sealing strength along with excellent bolt load retention and outstanding resistance to blowout. With the graphite coating anti-stick properties will not stock upon disassembly

• Covers,lifterblocksaremadeofMicropore• Transmission,intakegasketsaremadeofSyntheseal• OilpumpscontainResinReinforced/HighTensileStrengthgaskets• Eachkitcomescompletewithallthenecessarygaskets,seals,andO-ringsneededtocompletelyrebuildyourengine,orjustportionsofyour

engine

Complete Engine Gasket Kits with Primary GasketsThese complete kits also includes the components required to service the primary cover as well. 660491 Fits Dyna Glide models from 99-05, and Softail models from 00-06 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $125.99

660492 Fits Touring models from 99-06. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $119.99

Complete Engine Gasket Kits without Primary Gaskets660540 Fits all Twin Cam models from 06-12 95/96". . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $101.99

660417 Fits all Twin Cam 88 models from 99-06 (except Dyna Glide models), and Dyna Glide models from 99-05. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $101.99

Complete Top End Gasket KitsIncludes everything necessary to rebuild the engine from the cylinder base up.660416 Fits all 88" Big Twin engines from 99-06. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $82.99

660415 Fits all 95" Big Twin engines from 99-06. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $79.99

Complete Cam Service KitsA unique kit that only includes the components necessary to service the cam side of the engine case. 660418 Fits all Twin Cam 88 / Twin Cam 96 models from 99-07 (repl. OEM 17045-99A) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $36.99


660451

660458

Twin Cam

Motor Factory Transmission Kits for Twin Cam ModelsState of the art gasket material composites such as Micropore have gone into producing high quality gaskets that are contained in each kit. On the back side of each gasket kit will be a content label listing all the gaskets, O-rings and seals contained in each kit. This kit comes complete with all the necessary gaskets, seals and O-rings needed to completely rebuild the transmission. 660451 Fits Touring models from 99-06. . . . . . . . . . . . . . . . . . . . . . . . .$29.99

660542 Fits Touring models from 07-12. . . . . . . . . . . . . . . . . . . . . . . . .$29.99

660452 Fits Dyna Glide models from 99-05. . . . . . . . . . . . . . . . . . . . . .$29.99

660541 Fits Dyna models from 06-12 & Softail models from 07-12 $29.99

660450 Fits Softail models from 86-06 . . . . . . . . . . . . . . . . . . . . . . . . .$27.99

Motor Factory Primary Kits for Twin Cam ModelsIncludes all the required parts to completely service the primary chain case of each model application. All primary cover and inspection cover gaskets are made of Micropore material and are silicone beaded. 660458 Fits FXR and Touring models from 94-06 . . . . . . . . . . . . . $26.99

660459 Fits Softail models from 94-06 and Dyna Glide models from 94-05 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $27.99


Gaskets for Twin Cam Models

Replaces OEM # Motor Factory

Pack Qty Description Price

16719-99B 660321 10 Lower rocker housing, 99-09, RCS $51.99

16775-99B 660322 2 Cylinder head, 99-06, .060" thick (stock), graphite coated, steel core $19.99

16775-99B 660323 2 Cylinder head, 99-06, .050" thick, graphite coated, steel core $18.99

16775-99B 660324 2 Cylinder head, 99-06, .048" thick, graphite coated, steel core $18.49

16787-99 660325 2 Cylinder head (95"), 99-06, .042" thick, graphite coated, steel core $21.99

17369-06 660554 5 Derby cover gasket, 07-12 $65.99

17386-99A 660326 10 Upper rocker box cover, 99-12 $51.99

17591-99 660327 10 Breather cover, 99-10, Micropore $14.99

17592-99 660328 10 Breather baffle, 99-10, Micropore $7.99

18635-99B 660329 10 Lifter cover, 99-12, Micropore $11.99

25244-99A 660330 10 Cam cover, 99-12, Micropore $21.99

25416-99C 660312 5 Derby cover, 5-hole, 99-05 $35.99

26072-99A 660331 10 Oil pan, 99-12 Dyna Glide models $12.99

26077-99A 660332 10 Oil pan, 99-12 Touring models $35.99

29062-95B 660333 10 Carburetor backing plate, 99-12 $11.99

29313-95 660334 10 Filter element mounting, 99-09 except 08-12 Touring models $7.49

29368-99 660335 10 Induction module to backing plate, Touring models, 99-01, Micropore $13.99

29463-99 660336 10 Fuel injection filter element, Touring models 99-01, Micropore $11.99

29583-01A 660318 10 Air cleaner backing plate (carburetor and EFI models), 01-12 except 08-12 Touring models, Syntheseal

$11.99

29645-08 660561 10 Filter element mounting, 08-12 Touring models $68.99

29718-08 660562 10 Air cleaner backing plate, 08-12 Touring models $89.99

34901-94C 660337 5 Primary cover, 99-06 Touring and FXR models, silicone bead, Micropore $84.99

34901-07 660557 5 Primary cover, 07-12 Touring models $101.99

34904-86D 660338 10 Transmission top cover, 99-06 Softail and Touring models; 99-05 Dyna Glide models, silicone bead $11.99

34906-85 660339 10 Inspection cover, 99-06 FXR and Touring models, silicone bead, Micropore $23.99

34917-99 660340 10 Transmission top cover, Dyna Glide models, 99-05, Micropore $27.99

34917-06 660550 10 Transmission top cover, 07-12 Softail and Touring models, 06-12 Dyna Glide models $21.99

34934-06 660555 10 Primary cover to alternator/engine case, 07-12 Softail and Touring models; 06-12 Dyna Glide models $127.99

35607-06 660553 10 Transmission to engine case, 06-12 Dyna Glide models; 07-12 Touring models $114.99

35653-98 660341 10 Bearing housing, 99-06 Softail and Touring models; 99-05 Dyna Glide models $18.99

35654-06 660551 10 Bearing housing, 07-12 Softail and Touring models; 06-12 Dyna Glide models $17.49

36801-87C 660342 10 Transmission end cover, 99-06 except 06 Dyna Glide models $9.99

36805-06 660552 10 Transmission end cover, 07-12 Softail and Touring models; 06-12 Dyna Glide models $21.99

60539-94B 660343 5 Primary cover, 99-06 Softail models, 99-05 Dyna Glide models $89.99

60547-06 660556 5 Primary cover, 07-12 Softail models, 06-12 Dyna Glide models $97.99

60567-90A 660344 10 Inspection cover, 99-06 Softail models, 99-05 Dyna Glide models, silicone bead, Micropore $20.99

62432-93 660345 10 Oil spout, 93-06 Touring models $15.99

63859-95A 660407 10 Inspection cover tower washer, 99-06 Softail models, 99-05 Dyna Glide models, Micropore $4.49

65324-83A 12095 10 Exhaust port, 99-12 all models $28.99

O-Rings for Twin Cam Models11105 19485 10 Drain plug, trans / engine, 99-12 $2.99

11117A 54003 10 Shifter shaft sleeve, 99-05 $3.99

11120 660559 10 Engine oil dipstick, 07-12 Touring models, 06-12 Dyna Glide models $2.49

11132A 25300 10 Pushrod cover, middle, and transmission filler plug, 99-09 all models $1.99

11145A 54006 10 Pushrod cover, lower, 99-12 $2.49

11147B 54007 10 Primary cover to alternator / engine case, 99-06 Softail and Touring models, 99-05 Dyna Glide models

$11.99

Twin Cam


660326660330

660321

66032954041

660328

660323

660312

660322

Twin Cam

Gaskets for Twin Cam Models

Replaces OEM # Motor Factory


O-Rings for Twin Cam Models11157 54009 10 Oil pump, 03-06 all models $3.99

11179 54269 10 Transmission clutch cable, 99-12 $6.99

11191 660313 10 Gear shifter, Softail 90-99 $6.99

11256 53941 10 Cylinder base, 99-09 all models $12.99

11270 53891 10 Rocker arm support, 99-12 $4.49

11273 53994 10 Cylinder head alignment dowel to engine case, and drain 99-12 $2.99

11289A 53893 10 Piston cooling jet, 01 Touring models; Transmission speedometer sensor, 03-12 Softail models, 01-12 Dyna Glide and Touring models; Crank-shaft position sensor, 99-12

$2.49

11290 660314 10 Transmission neutral switch, 99-12 $8.29

11293 53992 10 Oil filter mount, 99-06 Touring and Dyna Glide models; Oil pump, 99-02 and 06-12 all models; Pushrod cover, upper, 99-12

$9.99

11324 660315 10 Primary drain plug, 04-06 $6.99

11345 660317 10 Oil filler plug, 00-05 Softail $14.99

11573 660560 10 Oil spout, 06-12 Dyna Glide models $2.49

26432-76A 54014 10 Case alignment dowel, 99-07 $6.49

Seals for Twin Cam Models11165 54010 10 Mainshaft bearing, 99-06 $9.99

11291 53892 10 M.A.P. sensor, 99-12 $14.99

12035B 54040 10 Mainshaft, 5th gear, 99-06 $21.99

12045 54052 5 Shift lever shaft, 99-06 $7.99

12052A 54073 5 Primary-to-mainshaft, 99-12 $11.99

12066A 54428 5 Starter shaft, 99-06 $6.49

12067B 54425 10 Mainshaft (left side), 99-06 Softail and Touring models, 99-05 Dyna $46.99

12068 53894 10 Crankcase, 99-12 all models $28.99

12074 660558 5 Mainshaft (left side), 07-12 Softail and Touring models, 06-12 Dyna $89.99

12077 660563 5 Mainshaft, 5th gear, 06-12 $33.99

18001-83A 99196 4 Valve stem, 99-04 all models $9.99

18094-02A 660305 10 Valve stem, 05-12 all models $52.99

26858-99 53895 10 Rocker cover umbrella valve, 99-10 $33.99

26992-99 53922 10 Intake manifold, 99 Dyna Glide models, and 99-00 EFI Touring models $15.99

26995-86A 54150 10 Intake manifold, 00-12 $19.99

27002-89 54422 10 Ring, carburetor to intake manifold $37.99

37101-84B 54066 EA Shift lever shaft, 06-09 $3.49

45359-00 660316 10 Oil interconnect (engine balancer), 00-12 Softail models $61.99

Hardware for Twin Cam Models27714-06 660586 10 Seal ring, O2 sensor, 07-12 $28.99

63815-99 53947 10 Cylinder head filter element breather, 99-10 all models $10.99


Motor Factory Engine Gasket Kits for Evolution Big TwinsState of the art gasket material composites have gone into producing gasket kits that will greatly improve the life of your engine. On the back side of each gasket kit will be a content label listing all the gaskets, O-rings and seals contained in each kit. • Headgasketsaremadeofahighperformancefacingmaterial

with graphite coating on steel core with fire ring. This multi-layer fiber/metal reinforced composite head gasket delivers improved combustion sealing strength along with excellent bolt load retention and outstanding resistance to blowout. With the graphite coating anti-stick properties will not stock upon disassembly.

• Allcovers,andintakegasketsaremadeofMicroporematerialthatis best suited for a variety of cover application and is resistant to fuel and will not creep, crack or become brittle.

• Eachkitcomescompletewithallthenecessarygaskets,seals,andO-rings needed to completely rebuild your engine, or just portions of it.

Complete Engine Gasket Kits These kits do not include primary or transmission gaskets. 660419 Fits all models (except Dyna Glide models) from 84-91 (rubber

rocker cover gaskets) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$85.99

660420 Fits all models from 92-99 (rubber rocker cover gaskets) . .$79.99

Complete Top End Gasket KitsIncludes everything necessary to rebuild the engine from the cylinder base up.660421 Fits all models (except Dyna Glide models) from 84-91 (rubber

rocker cover gaskets) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$62.99

660422 Fits all models from 92-99 (rubber rocker cover gaskets) . .$69.99

Rocker Box Gasket Kits Includes gasket, seals, and washers necessary to install a 3-piece rocker cover on Evolution engines. Rocker box cover gaskets (left, right) are made of Hydro-Fused, the lower and upper gaskets are made of high temperature, oil resistant silicone.660423 Fits Big Twins 84-91 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$26.99

660424 Fits Big Twins 92-99 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$36.99

Big Bore Head Gasket KitThis kits contains; two base gaskets that are made of Hydro-Fused composite. two head gaskets made of multi-layer fiber / metal reinforced composite with fire ring, and four cylinder stud O-rings (Viton). Will fit all 3 5/8" Big Bore cylinders for Evolution motors.660426 Complete kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$16.99

Motor Factory Transmission Kits for Evolution Big Twin ModelsState of the art gasket material composites such as Micropore have gone into producing gasket kits that will greatly improve the life of your transmission. On the back side of each gasket kit will be a content label listing all the gaskets, O-rings and seals contained in each kit. This kit comes complete with all the necessary gaskets, seals and O-rings needed to completely rebuild the transmission.660448 Fits Evolution Touring models from 93-98 . . . . . . . . . . . . . . $19.99

660449 Fits Evolution Dyna Glide models from 91-98 . . . . . . . . . . . $18.49

660450 Fits Evolution 5 speed Touring models from 80-92, FXR models from 82-94, Softail models from 86-99 . . . . . . . . . . . . . . . . . $27.99

Motor Factory Primary Kits for Evolution ModelsIncludes all the required parts to completely service the primary chain case of each model application. All primary cover and inspection cover gaskets are made of Micropore material and are silicone beaded. 660455 Fits all 4-speed Big Twins from 65-86 and 5 speed Softail mod-

els from 86-88 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$28.99

660461 Fits all 5-speed Softail and Dyna Glide models from 89-93 $26.99

660459 Fits Softail models from 94-06 and Dyna Glide models from 94-05 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$27.99

660457 Fits 5-speed FXR and Touring models from 85-93. . . . . . . . .$26.99

660458 Fits 5-speed FXR and Touring models from 94-06. . . . . . . . .$26.99

660448

660459

660420


Gaskets for Evolution Big Twins 84-99

No. Replaces OEM#

Motor Factory


1 16770-84D 660346 2 Cylinder head, 84-99, .060" thick graphite coated / steel core fire ring $15.991 16773-85 660347 2 Cylinder head, 84-99, .048" thick (stock) graphite coated / steel core fire ring $15.991 16773-85 660348 2 Cylinder head, 84-99, .060" thick graphite coated / steel core fire ring $17.491 16773-85 54105 10 Cylinder head, 84-99, .043" Teflon $59.992 16777-83A 660349 10 Cylinder base, 84-99, Hydro-Fused $12.99

660353 10 Cylinder base, 3 5/8" bore .020", Hydro-Fused $9.993 16778-84A 660350 10 Lower rocker cover to cylinder head, right, 84-99, Hydro-Fused $14.994 16779-84A 660352 10 Lower rocker cover to cylinder head, left, 84-99, Hydro-Fused $24.99

4A 16800-84A 660320 2 Lower rocker cover one piece (left/right) 84-99, RCS $17.995 17355-84 54116 10 Rocker cover, lower (cork), 84-91 $28.995 17355-84A 54080 10 Rocker cover, lower (silicone), 84-91 $31.995 17355-92 54085 10 Rocker cover, lower (silicone), 84-99 $34.996 17356-84 54117 10 Rocker cover, upper (cork), 84-91 $27.996 17356-84A 54081 10 Rocker cover, upper (silicone), 84-91 $31.996 17356-92 54086 10 Rocker cover, upper (silicone), 92-99 $34.997 17358-84 54118 10 Rocker cover, inner (cork), 84-91 $4.997 17358-84A 54082 10 Rocker cover, inner (silicone), 84-99 $9.998 18633-48D 660351 10 Tappet guide (rear), 84-99, Micropore $7.499 18634-48C 660358 10 Tappet guide (front), 84-99, Micropore $7.4910 25225-70B 660359 10 Cam cover, 84-92, silicone bead, Micropore $18.99- 25225-93 660360 10 Cam cover, 93-99, silicone bead, Micropore $17.99

11 25416-70 660361 10 Derby cover, early 84 silicone bead, Micropore $17.4911A 25416-70A 660319 5 Derby cover 3 hole 84-98, silicone bead, foam coated steel $30.99

- 26072-90A 660362 10 Transmission oil pan, Dyna Glide models 91-98, Micropore $21.99- 26077-93 660363 10 Transmission oil pan, Touring models 93-98, Micropore $34.99

12 26273-80B 660364 10 Oil pump body, 84-91, Resin Reinforced (fiber) $5.99- 26273-92 660365 10 Oil pump body, 92-99, Resin Reinforced (fiber) $6.99

13 26276-80A 660366 10 Oil pump cover, 84-91, Resin Reinforced (fiber) $9.49- 26276-92 660367 10 Oil pump cover, 92-99, Resin Reinforced (fiber) $7.49

14 29058-77 660368 10 Air cleaner to carburetor, 84-89, Syntheseal $4.99- 29059-88 660369 10 Air cleaner to CV carburetor, 90-99, Syntheseal $4.99- 29062-95B 660333 10 Carburetor backing plate (HDI only), Micropore $11.99

15 29242-83 54169 10 Compliance fitting to head, 84-89 $3.99- 29313-95 660334 10 Filter element mounting (HDI only), Micropore $7.49

16 31320-80 660515 10 Starter housing, 4-speed belt drive 84-86; 5-speed Softail models 86, Micropore $6.99- 31321-80 54175 5 Starter drive cover, 4-speed belt drive 84-86; 5-speed Softail models 86 $4.49

17 32591-80 660370 10 Point cover (4-hole), 84-99, Syntheseal $5.99- 33043-80 54130 10 Neutral switch, 84-99 $2.99

18 33196-79 660513 10 Shift shaft cover (4-speed), 84-86, Micropore $4.4919 33295-36 660371 10 Transmission side cover (4-speed), 84-86, Syntheseal $7.49

1

19

29

16

23

24

11

21

1813 12

15

1432

22

31

17

10

8

92

Evolution Big Twins


6 5

7

4

3

20 27

25

26

30

28

11A

4A

Gaskets for Evolution Big Twins 84-99

No. Replaces OEM#

Motor Factory


Gaskets for Evolution Big Twins 84-9920 34824-79 660372 10 Shifter cover (4-speed), 84-86, Syntheseal $8.9921 34901-79B 660373 5 Primary cover (5-speed), 84 FXR and Touring models, silicone bead, Micropore $79.9921 34901-85 660374 5 Primary cover (5-speed), 85-93 FXR and Touring models, silicone bead, Micropore $89.9921 34901-94C 660337 5 Primary cover (5-speed), 94-99 FXR and Touring models, silicone bead, Micropore $84.9922 34902-79A 660375 10 Chain housing (5-speed), inner, 84, silicone bead, Micropore $26.99- 34903-79 660376 10 Chain housing-to-transmission (5-speed), 84, silicone bead, Micropore $6.99- 34904-79 660377 10 Transmission top cover (5-speed), 84-85, Syntheseal $9.49- 34904-86D 660338 10 Transmission top cover (5-speed), 86-99 (except Dyna Glide models), Micropore $11.99

23 34906-79A 660379 10 Inspection cover (5-speed), 84 FXR and Touring models, silicone bead, Micropore $17.4924 34906-85 660339 10 Inspection cover (5-speed), 85-99 FXR and Touring models, silcone bead, Micropore $23.99- 34917-90A 660380 10 Transmission top cover, 91-98 Dyna Glide models, Micropore $19.99

25 35652-79A 660401 10 Transmission bearing housing (5-speed), 84-99, Syntheseal $9.4926 36801-79 660381 10 Transmission end cover (5-speed), 84-86, Syntheseal $9.4927 36801-87C 660342 10 Transmission end cover (5-speed), 87-99, Micropore $9.99- 37091-84 54381 10 Filler plug washer (5-speed), 84-86 $11.99

28 60538-81A 660382 5 Primary cover (9-hole), 4-speed 84-86; 5-speed Softail models 86-88, silicone bead, Micropore $68.9928 60539-86 660509 5 Primary cover (9-hole), 4-speed 84-86; 5-speed Softail models 86-88, silicone bead, Micropore $87.99- 60539-89 660383 5 Primary cover (9-hole), 89-93 Softail and Dyna Glide models, silicone bead, Micropore $89.99- 60539-94B 660343 5 Primary cover (9-hole), 94-99 Softail and Dyna Glide models, silicone bead, Micropore $89.99

29 60559-80 660518 10 Starter oil deflector (4-speed, chain drive), 84-85, Micropore $5.9930 60567-65A 660384 10 Inspection cover, 4-speed 84-86; 5-speed Softail models 86-88, silicone bead, Micropore $8.9930 60567-90A 660344 10 Inspection cover, 89-99 Softail and Dyna Glide models, silicone bead, Micropore $20.9931 60645-65 54212 10 Solenoid mount (4-speed chain drive), 84 $5.49- 62423-90A 660385 10 Oil spout, 93-98 Dyna Glide models, Micropore $7.49- 62432-93 660345 10 Oil spout, 93-98 Touring models, Syntheseal $15.99- 62702-52 54223 10 Drain plug (4-speed), 84-86 $3.99- 63858-49 54227 10 Rocker cover screw, 84-99 $2.99

32 65324-83 12106 10 Exhaust port (early-style), 84-99 $25.9932 65324-83A 12095 10 Exhaust port (late-style), 84-99 $28.99- 65781-82 54229 10 Exhaust crossover, 82-99 (except Dyna Glide models) $34.99- 65826-90A 092917 10 Exhaust crossover, 91-98 Dyna Glide models $24.99

O-Rings for Evolution Big Twins 84-99- 11101 12082 10 Kick start shaft, 84-86; Deflector plate (4-speed chain drive), 84-85 $1.49- 11105 19485 10 Tappet screen plug, 84-99; Oil pump check valve plug, 84-99, Relief valve plug, 84-99 $2.99- 11115 19487 10 Countershaft (4-speed), 84-86 $2.99- 11117A 54003 10 Shifter shaft sleeve (5-speed), late 84-99 $3.99- 11132 25300 10 Pushrod cover (middle), 84-99 $1.99- 11145A 54006 10 Pushrod cover, lower, 84-99 $2.49- 11147B 54007 10 Alternator-to-case, 84-99 (only for O-ring grooves measuring .08-.084" deep) $11.99

Evolution Big Twins


Evolution Big TwinsO-Rings for Evolution Big Twins 84-99 continued

No. Replaces OEM#

Motor Factory


- 11157 54009 10 Pushrod cover (upper), 84-99 $3.99- 11162 54259 10 Mainshaft (5-speed), right end, late 84 $2.99- 11166 54017 10 Main drive gear (4-speed), late 84-86 $2.99- 11171 54182 10 Fork air control (4-speed), 84-86 $2.49- 11178 54266 10 Transmission filler plug (5-speed), 87-92 $2.49- 11179 54269 10 Clutch cable, 87-99 $6.99- 11241 54423 10 Oil pump end cap, 92-99 $2.49- 11289A 53893 10 Transmission speed sensor, 94-99 $2.49- 11290 660314 10 Neutral switch, 94-99 $8.29- 25416-84 54013 10 Derby cover, late 84-98 $9.99- 26432-76A 54014 10 Cylinder stud insert (.062"), 84-99 $6.49- 27060-55 12085 10 Solenoid mount (4-speed belt drive), 84 $3.99- 33340-90 54050 10 Starter shaft bolt (5-speed), 90-92 $15.99- 62672-90 54420 10 Lower dipstick cover (5-speed), Dyna Glide models 91-98 $4.49- 62673-90 54421 10 Dipstick (5-speed), Dyna Glide models 91-98 $5.49

Seals for Evolution Big Twins 84-99- 11148 54008 5 Shifter shaft (5-speed), early 84 $8.49- 11165 54010 10 Mainshaft bearing (5-speed), quad seal, late 84-99 $9.99- 12010 54045 10 Shifter shaft cover (4-speed), 84-86 $8.99- 12013A 54046 10 Main drive gear (4-speed), 84-86 $12.49- 12014 25307 10 Clutch hub nut (4-speed), E84 $9.99- 12018 25308 10 Primary-to-mainshaft (4-speed), early 84 $13.99- 12026B 25311 5 Sprocket shaft, 84-99 $10.99- 12035B 54040 10 Mainshaft, 5th gear, 91-99 $21.99- 12043 54048 5 Transmission-to-starter (5-speed), early 84 $4.99- 12044A 54049 5 Mainshaft (5-speed), early 84 $12.99- 12045 54052 5 Shifter shaft (5-speed), 84-99 $7.99- 12050 54054 EA Sprocket shaft (5-speed), clutch side, late 84-94 $4.99- 12051 54055 EA Transmission-to-starter (5-speed), late 84-88 $2.99- 12052A 54073 5 Primary-to-mainshaft (4 and 5-speed), late 84-99 $11.99- 12053A 54059 5 Starter shaft to inner primary (5-speed), 89-93 $21.99- 12066A 54428 5 Starter shaft to inner primary (5-speed), 94-99 $6.49- 12067B 54425 10 Mainshaft (5-speed), left side, late 94-99 $46.99- 18001-83A 99196 4 Valve stem, 84-99 $9.99- 26227-58 54058 10 Oil pump body, 84-99 $9.99- 26995-86A 54150 10 Intake manifold, 90-99 $19.99- 27002-89 54422 10 Carburetor-to-manifold, 88-99 $37.99- 31341-80 54062 10 Starter shaft housing, 4-speed belt drive 84-86, 5-speed Softail models 86 $10.99- 33076-37 19077 10 Kick start shaft (square type seal), 84-86 $6.99- 34036-80 54182 10 Shifter cam shaft (4-speed), 79-84 $2.49- 37101-84B 54066 EA Clutch release lever, late 84-86 $3.49- 37741-82 54069 EA Mainshaft (4-speed), 84-86 $2.99- 60641-74 25333 5 Shifter shaft (4-speed), 84-85 $3.99- 63525-92 54408 4 Oil line, 92-99 $5.49- 63528-92 54409 4 Oil line (with ferrule), 92-99 $22.99- 83162-51 25335 5 Cam cover, 84-99 $5.49

Hardware for Evolution Big Twins 84-99- 6007 54248 10 Washer, transmission drain plug (5-speed), 84-94 $5.99- 6114 54256 10 Washer (copper), rocker cover screw, 84-99 $4.49- 6377 54252 10 Washer (brass), oil pump plug, 84-86 $4.49- 8866 54254 10 Check ball, oil pump, 84-99 $3.99- 8873 54254 10 Check ball, oil pump, 84-99 $3.99- 11002 54000 10 Retaining ring, oil pump, 84-99 $2.49- 26348-15 20095 10 Key, oil pump, 84-99 $5.99- 26348-36 54250 10 Retaining ring, oil pump, 84-99 $5.99

80-84 FXR and Touring Models

85-11 FXR and Touring

Models


6

5

7

431

20

27

25

26

30

28

19

16

29

23

24

11

18

13

12

32

14

15

22

31

17

10

8

9

2

37

34

33

35

39

36

38

38

38


Gaskets for Shovelhead Big Twins 66-84

No. Replaces OEM#

Motor Factory


1 16770-66B 660386 2 Cylinder head, 66-84 .042", EnCore $15.99

1 16770-66B 660387 10 Cylinder head, 66-84 .048", Teflon $47.99

1 16770-66B 13151 2 Cylinder head, 66-84 3-5/8" bore, blow - proof, HTX900 $9.99

2 16776-63 660388 10 Cylinder base, front, 66-84, Micropore $9.49

3 16777-63 660389 10 Cylinder base, rear, 66-84, Micropore $9.99

4 17540-69A 660390 10 Rocker arm cover 66-84 silicon bead, Micropore $19.99

5 18196-51 660520 10 Valve guide, 66-69, Micropore $5.49

6 18633-48D 660351 10 Tappet guide, rear, 66-84, Micropore $7.49

7 18634-48B 660358 10 Tappet guide, front, 66-84, Micropore $7.49

8 25225-36C 660393 10 Gear case cover, 66-69, Micropore $17.49

9 25225-70B 660359 10 Cam cover, 70-84 silicone beaded, Micropore $18.99

10 25416-70 660361 10 Derby cover, 70-E84 silicone beaded Micropore $17.49

- 25811-11 54132 10 Neutral switch, 66-E79 $3.99

- 26231-78 54131 10 Felt washer, oil pump relief valve plug, 66-80 $7.49

11 26245-41 660394 10 Oil pump body (paper), 66-67, Resin Reinforced $9.49

12 26246-68A 54135 10 Oil pump body (Mylar), 68-80 $3.49

13 26257-50A 660395 10 Oil pump cover (paper), 66-67, Resin Reinforced $8.99

14 26258-68B 54142 10 Oil pump cover (Mylar), 68-80 $6.99

15 26273-80B 660364 10 Oil pump body (paper), 81-84 Resin Reinforced $5.99

16 26276-80A 660366 10 Oil pump cover (paper), 81-84, Resin Reinforced $9.49

17 27023-71 54151 10 Carburetor to intake manifold (Bendix), 71-75 $2.99

- 27077-78 660397 10 Intake spacer block, 78, Micropore $6.99

- 27410-57 660398 10 Intake manifold, 66, Syntheseal $5.49

18 29058-77 660368 10 Air cleaner to carburetor, late 77-84, Syntheseal $4.99

19 30143-58 660511 10 Generator mount, 66-69, Syntheseal $4.49

20 31320-80 660515 10 Starter housing to primary (4-speed belt drive), 80-84 $6.99

- 31321-80 54175 5 Starter drive cover (4-speed belt drive), 80-84 $4.49

22 32591-80 660370 10 Point cover (4-hole), 70-84, Syntheseal $5.99

- 33043-80 54130 10 Neutral switch washer, late 79-84 $2.99

23 33196-79 660513 10 Shifter shaft cover (4-speed), late 79-84, Micropore $4.49

24 33295-36 660371 10 Transmission side cover (4-speed), 66-84, Syntheseal $7.49

- 34459-26 54183 10 Washer, shift shaft, 66-69 $6.99

- 34552-52 660399 10 Shift cover, 66-E79, Syntheseal $6.49

25 34565-52 54185 10 Dust cover to transmission top, 66-E79 $4.49

26 34824-36 660400 10 Ratchet top, 66-E79, Syntheseal $9.99

27 34824-79 660372 10 Shifter top cover (4-speed), late 79-84, Syntheseal $8.99

28 34901-79B 660373 5 Primary cover (thin), silicone beaded, 5-speed FXR and Touring models 80-83, Micropore $79.99

29 34902-79A 660375 10 Chain housing (5-spd), inner primary, 80-83, silicone bead, Micropore $26.99

- 34903-79 660376 10 Transmission to Chain Housing (5-speed), silicone beaded, 80-83 Micropore $6.99

- 34904-79 660377 10 Transmission top cover (5-speed), 80-83, Syntheseal $9.49

30 34906-79A 660379 10 Inspection cover (5-speed), silicone beaded, 80-83, silicone bead, Micropore $17.49

- 35607-73 660516 10 Speedo drive cover to case, 73-77, Micropore $5.49

31 35652-79A 660401 10 Bearing housing (5-speed), 80-83, Syntheseal $9.49

- 36025-36 660517 10 Countershaft end cap (4-speed), 66-69, Syntheseal $5.49

32 36801-79 660381 10 Transmission end cover (5-speed), 80-83, Syntheseal $9.49

- 37091-84 54381 10 Filler plug washer (5-speed), 80-83 $11.99

34 60538-81A 660382 5 Primary cover (9-hole), 4-speed, 66-84 silicone bead, Micropore $68.99

34 60539-86 660509 5 Primary cover (9-hole silicone beaded), 4-speed, 66-84 silicone bead, Micropore $87.99

- 60540-65 660402 10 Primary cover (8-hole thin), 4-speed, 66-80 silicone bead, Micropore $65.99

35 60559-80 660518 10 Starter oil deflector (4-speed chain drive), late 80-84, Micropore $5.99

36 60567-65A 660384 10 Inspection cover (4-speed), 66-84, silicone bead, Micropore $8.99

37 60645-65 54212 10 Solenoid mount (4-speed chain drive), 66-84 $5.49

- 62628-66 25334 10 Oil tank filler cap (cork washer), late 66-E82 $8.49

- 62702-52 54223 10 Tappet screen plug, 66-E70; Drain plug (4-speed), 66-84 $3.99

- 65781-82 54229 10 Exhaust crossover, 82-84 $34.99

38 65834-68A 12100 10 Exhaust port (fiber outer with brass crush ring), 66-84 $17.99

38 65834-68A 092921 10 Exhaust port (fiber between copper with brass crush ring), 66-84 $10.49

- 67141-36 54232 10 Speedometer drive to case (4-speed), 66-83 $4.99

Shovelhead Big Twins


O-Rings for Shovelhead Big Twins 66-84

No. Replaces OEM#

Motor Factory


- 11101 12082 10 Rocker arm, 66-84; Distributor housing, 66-69; Oil fitting, cylinder base, late 81-82; Pushrod cover, upper, 79-E81; Starter crank, 66-84; Deflector plate, 4-speed chain drive, 71-84

$1.49

- 11105 19485 10 Tappet screen plug, late 70-84; Oil pump check valve plug, late 78-84; Relief valve plug, 81-84 $2.99

- 11107 19486 10 Carburetor adapter, (Tillotson), 67-70 $2.99

- 11115 19487 10 Countershaft (4-speed), 66-84 $2.99

- 11118 54004 10 Pushrod cover (upper quad seal), late 81-84 $9.99

- 11125 25305 10 Alternator-to-case, 70-82 (only for O-ring grooves measuring .049-.054" deep, repl. OEM 11125) $9.99

- 11132 25300 10 Pushrod cover, middle, late 79-84 $1.99

- 11133A 25301 10 Pushrod cover (lower quad seal), late 79-84 $3.99

- 11147B 54007 10 Alternator-to-case, 83-84 (only for O-ring grooves measuring .080-.084" deep) $11.99

- 11166 54017 10 Main drive gear (4-speed), late 84 $2.99

- 11171 54182 10 Shifter fork shaft (4-speed), late 79-84 $2.49

- 25416-84 54013 10 Derby cover, late 84 $9.99

- 27060-55 12085 10 Intake manifold, 66-E78; Solenoid mount, 4-speed belt drive, 80-84 $3.99

- 27312-76 092539 10 Carburetor accelerator pump, 76-E78 $7.99

Seals for Shovelhead Big Twins 66-84- 11148 54008 5 Shifter shaft (5-speed), 82-83 $8.49

- 12010 54045 10 Shifter shaft cover (4-speed), late 79-84 $8.99

- 12013A 54046 10 Main drive gear (4-speed), E66 and late 81-84; Mainshaft (5-speed), 5th gear, 80-83 $12.49

- 12014 25307 10 Clutch hub nut, 66-E84 $9.99

- 12018 25308 10 Primary-to-mainshaft (4-speed), 70-E84 $13.99

- 12022 25309 10 Seal, main drive gear, late 66-E81 (repl. OEM 12022) pack of 10 $11.49

- 12026B 25311 5 Sprocket shaft, 70-84 $10.99

- 12043 54048 5 Transmission to starter (5-speed), 80-83 $4.99

- 12044A 54049 5 Mainshaft (5-speed), 80-83 $12.99

- 12045 54052 5 Shifter shaft (5-speed), 80-83 $7.99

- 12052A 54073 5 Primary-to-mainshaft (4-speed), late 84 $11.99

- 17955-36 12058 100 Pushrod cover cork, small, 66-E79 $13.49

- 17955-36 12064 100 Pushrod cover rubber washer, small, 72-E79 $32.99

- 17955-48 12057 100 Pushrod cover cork, large, 66-E79 $12.99

- 17955-48 12065 100 Pushrod cover rubber washer, large, 66-E79 $35.99

- 18000-81 99195 4 Valve stem, late 80-84 (without installation tool) $17.99

- 26227-58 54058 10 Oil pump body, 68-84 $9.99

- 27062-78 25102 10 Intake manifold to head, late 78-84 $22.95

- 30145-46A 54061 10 Generator drive gear, 66-69 $10.99

- 31341-80 54062 10 Starter shaft housing, 4-speed belt drive, 80-84 $10.99

- 33076-37 19077 10 Kick start shaft, 66-84 (square type seal) $6.99

- 34036-36 54064 10 Shifter cam (4-speed), 66-E79 $5.99

- 34036-80 54182 10 Shifter cam shaft (4-speed), late 79-84 $2.49

- 35230-39 25103 EA Mainshaft (4-speed), 66-early 79 (double lip) $2.49

- 37741-67 25323 5 Mainshaft (4-speed), late 79-81 $7.99

- 37741-82 54069 EA Mainshaft (4-speed), 82-84 $2.99

- 60641-74 25333 5 Shifter shaft (4-speed), 74-84 $3.99

- 63529-57 12074 10 Oil line sleeve, 66-84 $2.49

- 83162-51 25335 5 Cam cover, 70-84 $5.49

- — 010518 4 Rocker arm (special seals designed to conform to the rocker shaft and cover hole), 66-84 (pack of 4) $7.99

Hardware for Shovelhead Big Twins 66-84- 6007 54248 10 Washer, drain plug (5-speed), 80-83 $5.99

- 6377 54252 10 Brass washer, oil pump plug, 66-84 $4.49

- 6581 54253 10 Brass washer, relief valve plug, 66-78 $9.49

- 8873, 8866 54254 10 Check ball, oil pump, 66-84 $3.99

- 11002 54000 10 Retaining ring, oil pump, 70-84 $2.49

- 26340-36 54074 10 Key, oil pump, 66-67 $17.99

- 26348-15 20095 10 Key, oil pump, 66-84 $5.99

- 26348-36 54250 10 Retaining ring, oil pump, 66-84 $5.99

- 35231-36 25320 10 Cork washer, mainshaft, 66-early 77 $6.99

Shovelhead Big Twins


Motor Factory Engine Gasket Kits for Shovelhead Big TwinsState of the art gasket material composites have gone into producing gasket kits that will greatly improve the life of your engine. On the back side of each gasket kit will be a content label listing all the gaskets, O-rings and seals contained in each kit.• HeadgasketaremadeofEnCorecomposite.Thematerialcontains

graphite coating, high-density fiber/metal reinforced composite for elevated temperature and thermally stressed gasket applications including Shovelhead, and Panhead cylinder head gaskets.

• Allcovers,intakegasketsaremadeofMicroporematerialthatisbest suited for a variety of cover application and is resistant to furl and will not creep, crack or become brittle.

• Eachkitcomescompletewithallthenecessarygaskets,seals,and O-rings needed to completely rebuild your engine, or just portions of it.

Complete Engine Gasket KitThis kit does not include primary or transmission gaskets.660430 Fits all Shovelhead Big Twins from 66-84 . . . . . . . . . . . . . . . .$52.99

Complete Top End Gasket KitsIncludes everything necessary to rebuild the engine from the cylinder base up.660431 Fits all Shovelhead Big Twins from 66-84 . . . . . . . . . . . . . . . .$32.99

660430

Motor Factory Big Bore Head Gasket Kit Contains two base gaskets and two head gaskets for 3 5/8" Shovelhead big bore cylinders. Head gaskets made of Encore HTX900 exceptional blow-resistant properties. Sold in sets.13155 Fits 3 5/8"-bore Shovelhead motors and S&S comparable

cylinders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$12.99

Motor Factory Primary Kits for Shovelhead ModelsIncludes all the required parts to completely service the primary chain case of each model application. All primary cover and inspection cover gaskets are made of Micropore material and are silicone beaded between all bolt holes.660455 Fits all 4-speed Big Twins from 65-86 . . . . . . . . . . . . . . . . $28.99

660456 Fits all 5-speed Big Twins from 80-84 (including models with diaphragm clutch) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $21.99

M660455

660455

Motor Factory Transmission Kits for Shovelhead Big Twin ModelsState of the art gasket material composites such as Micropore have gone into producing gasket kits that will greatly improve the life of your transmission. On the back side of each gasket kit will be a content label listing all the gaskets, O-rings and seals contained in each kit. This kit comes complete with all the necessary gaskets, seals and O-rings needed to completely rebuild the transmission.660454 Fits 4 speed Big Twin models 79-86 . . . . . . . . . . . . . . . . . . $14.99

660450 Fits 5 speed Touring models from 80-92, FXR models from 82-94 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $27.99

660454


15 16 1319 18

1020

7

8

7

8

6

1

5

3

26

28

29

27

11

12

9 17

42

14

24 21

22

2530

23

Gaskets for Panhead Big Twins 48-65

No. Replaces OEM#

Motor Factory


1 16770-48 12107 10 Cylinder head, 48-65 $29.991 16770-48 12055 10 Cylinder head, 48-65 (Teflon) $55.992 16776-48 660356 10 Cylinder base, front, 48-62, Micropore $7.993 16776-63 660388 10 Cylinder base, front, 63-65, Micropore $9.494 16777-48 660357 10 Cylinder base, rear, 48-62, Micropore $10.995 16777-63 660389 10 Cylinder base, rear, 63-65, Micropore $9.996 17507-48 19477 10 Felt pad, pan cover, 48-65 $18.997 17541-48A 12054 10 Rocker cover (thick), 48-65 $15.997 17541-48A 12067 10 Rocker cover (steel reinforced), 48-65 $44.997 17541-48B 660355 10 Rocker cover gasket (thin), 48-65, Hydro-Fused $20.998 18196-51 660520 10 Valve guide, 51-65, Micropore $5.499 18633-48D 660351 10 Tappet guide, rear, 48-65, Micropore $7.4910 18634-48C 660358 10 Tappet guide, front, 48-65, Micropore $7.4911 24994-52 54239 10 Tappet screen plug, late 52-65 $4.4912 25225-36C 660393 10 Gear case cover, 48-65, Micropore $17.49- 25811-11 54132 10 Neutral switch, 48-65 $3.99

13 26245-41 660394 10 Oil pump body (paper), 48-65, Resin Reinforced $9.4914 26255-41 54136 10 Oil pump cover, governor fitted, 48-49 $3.4915 26257-41 54138 10 Oil pump cover (paper), 48-early 50 $3.4916 26257-50A 660395 10 Oil pump cover (paper), late 50-65, Resin Reinforced $8.9917 27411-40 54165 10 Intake manifold, 48-65 $7.4918 30138-30 54240 10 Generator end cover, 48-57 $3.9919 30143-58 660511 10 Generator mount, 58-65, Syntheseal $4.4920 32521-36 25314 10 Distributor base, 48-64 $3.9921 33295-36 660371 10 Transmission side cover (4-speed), 48-65, Syntheseal $7.49

Panhead Big Twins


Gaskets for Panhead Big Twins 48-65

No. Replaces OEM#

Motor Factory


Gaskets for Panhead Big Twins 48-65 (continued)- 34459-26 54183 10 Washer, shift shaft, 48-65 $6.99

22 34552-52 660399 10 Shift cover, 52-65, Syntheseal $6.4923 34565-52 54185 10 Dust cover to transmission top, 52-65 $4.4924 34824-36 660400 10 Ratchet top, 48-65, Syntheseal $9.99- 35231-36 25320 10 Mainshaft cork washer, 48-65 $6.99

25 36025-36 660517 10 Countershaft end cap, 48-65, Syntheseal $5.49- 60538-81A 660382 5 Primary cover (9-hole), 65 silicone bead, Micropore $68.99- 60539-86 660509 5 Primary cover (9-hole), 65, silicone bead, Micropore $87.99

26 60540-36 12046 10 Primary cover (cork), 48-64 $19.99- 60540-65 660402 10 Primary cover (8-hole, thin), 65 silicone bead, Micropore $65.99

27 60565-36 12048 10 Clutch cover (cork), 48-64 $17.99

28 60567-36 12050 10 Inspection cover (cork), 48-64 $4.49

- 60567-65A 660384 10 Inspection cover, 65, silicone bead, Micropore $8.9929 60629-55 660519 10 Chain housing to engine, 55-64 $9.99- 62702-52 54223 10 Drain plug, 48-65 $3.99

30 67141-36 54232 10 Speedometer drive to case, 48-65 $4.99O-Rings for Panhead Big Twins 48-65

- 11101 12082 10 Kickstart shaft, 48-65 $1.49- 11115 19487 10 Countershaft (4-speed), 65 $2.99- 27060-55 12085 10 Intake manifold, 55-65 $3.99

Seals for Panhead Big Twins 48-65- 12013A 54046 10 Main drive gear, 65 $12.49- 12014 25307 10 Clutch hub nut, 65 $9.99- 17955-36 12058 100 Pushrod cover cork, small, 66-E79 $13.49- 17955-36 12064 100 Pushrod cover rubber washer, small, 66-E79 $32.99- 17955-48 12057 100 Pushrod cover cork, large, 66-E79 $12.99- 17955-48 12065 100 Pushrod cover rubber washer, large, 66-E79 $35.99- 24990-52 54127 10 Engine check valve, late 52-65 $7.49- 30145-46A 54061 10 Generator drive gear, 48-65 $10.99- 33076-37 19077 10 Kickstart shaft, 48-65 (square type seal) $6.99- 34036-36 54064 10 Shifter cam, 48-65 $5.99- 35230-39 25103 EA Mainshaft, 48-65 (double lip) $2.49- 37337-36 54205 10 Clutch pushrod cork, 48-64 $4.49- 63529-57 12074 10 Sleeve, oil line, 63-65 $2.49

Hardware for Panhead Big Twins 48-65- 6377 54252 10 Brass washer, oil pump plug, late 50-65 $4.49- 6581 54253 10 Brass washer, relief valve plug, 54-65 $9.49- 8873, 8866 54254 10 Check ball, oil pump, 48-65 $3.99- 11002 54000 10 Retaining ring, oil pump, 48-65 $2.49- 26340-36 54074 10 Key, oil pump, 48-65 $17.99- 26348-15 20095 10 Key, oil pump, 48-65 $5.99- 26348-36 54250 10 Retaining ring, oil pump, 48-65 $5.99

Motor Factory Engine Gasket Kits for Panhead Big Twins from 48-65State of the art gasket material composites have gone into producing gasket kits that will greatly improve the life of your engine. On the back side of each gasket kit will be a content label listing all the gaskets, O-rings and seals contained in each kit.• HeadgasketaremadeofEnCorecomposite.Thematerialcontains

graphite coating, high-density fiber/metal reinforced composite for elevated temperature and thermally stressed gasket applications including Shovelhead, and Panhead cylinder head gaskets

• Coverssuchascamcover,andtappetcovers,aremadeofMicroporematerial that is best suited for a variety of cover application and is resistant to furl and will not creep, crack or become brittle. Rocker covers come in both Hydro-Fused and cork rubber material

• Eachkitcomescompletewithallthenecessarygaskets,seals,andO-rings needed to completely rebuild your engine, or just portions of it

Complete Engine Gasket KitThis kit does not include primary or transmission gaskets.660487 Fits Panhead models from 48-65 . . . . . . . . . . . . . . . . . . . . . . . . . . . . $38.99

Complete Top End Gasket KitsIncludes everything necessary to rebuild the engine from the cylinder base up. 660482 Fits Panhead models from 48-65 . . . . . . . . . . . . . . . . . . . . . . . . . . . . $27.99

660487

Panhead Big Twins


Motor Factory Transmission Kit for Panhead Big Twin ModelsState of the art gasket material composites such as Micropore, Resin Reinforced, and Syntheseal have gone into producing this gasket kit. On the back side of each gasket kit will be a content label listing all the gaskets, O-rings and seals contained in the kit. This kit comes complete with all the necessary gaskets, seals and O-rings needed to completely rebuild the transmission.660453 Fits 4-speed models from 36-E79 (repl. OEM 33031-36) . . .$17.99

Motor Factory Complete Engine Gasket Kit for Knucklehead Big Twins from 36-47This kit comes complete with high-density gaskets, seals and O-Rings for Knucklehead models. Primary and transmission gasket kits are sold separately.12036 Fits Knucklehead models from 36-47. . . . . . . . . . . . . . . . . . . .$31.99

Motor Factory Primary Cover Gasket Kits for Big TwinsEach kit includes all the high-density cork gaskets, seals and O-rings required for Big Twin models with tin primaries from 36-64090360 Complete kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$17.49

Upgraded to the latest buna/cork combination materials, this gasket kit fits Big Twin models with tin primaries from 36-64.54216 Complete kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$17.49

Motor Factory Transmission Gasket Kit and Parts for Early ModelsComplete kit includes gaskets, seals and washers.19493 Complete kit for 45" W, WL, WLA, G and ServiCar models from

40-73 (repl. OEM 33030-41) . . . . . . . . . . . . . . . . . . . . . . . . . . . .$14.99

54191 Top cover gasket (repl. OEM 34825-41) pack of 10 . . . . . . . .$6.49

54192 Side cover gasket (repl. OEM 34826-41) pack of 10 . . . . . . . .$5.49

54064 Shifter cam shaft seal (repl. OEM 34036-36) pack of 10 . . . .$5.99

54183 Shifter shaft washer (repl. OEM 34459-26) pack of 10 . . . . .$6.99

54193 Case cover seal (repl. OEM 34831-39) pack of 5 . . . . . . . . . . .$4.49

54068 Clutch gear seal (repl. OEM 37465-41) pack of 5 . . . . . . . . .$15.49

Motor Factory Reinforced Panhead Rocker Cover GasketsProvide excellent oil resistance and are manufactured from a cork/rubber composition that’s chemically-bonded to both sides of a steel core Fit all Panheads from 48-65.12067 Thick rocker cover gasket made of cork/rubber composite (Pack

of 10) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$44.99


Gaskets for Knucklehead Big Twins 36-47

No. OEM# Motor Factory Qty Description Price

1 16770-36 12110 10 Cylinder head, 36-47 $28.991 16770-36 54103 10 Cylinder head, 36-47 (Teflon) $42.992 16774-21 54107 10 Cylinder base, 36-47 $9.993 17535-38 54119 10 Valve cover, front intake and rear exhaust, 37-47 $4.494 17537-38 54120 10 Valve cover, rear intake, 37-47 $4.495 17539-38 54121 10 Valve cover, front exhaust, 37-47 $4.99- 18256-37 54258 10 Valve spring cover, 37-47 $4.496 18632-36 19471 10 Tappet guide, front and rear, 36-47 $5.497 25225-36A 12066 10 Gear case cover, 36-47 $6.99- 25811-11 54132 10 Neutral switch, 36-47 $3.998 26245-41 660394 10 Oil pump body (paper), 41-47, resin reinforced $9.499 26255-36 54545 10 Oil pump cover, 36-40 $3.99

10 26255-41 54136 10 Oil pump cover, governor fitted, 41-47 $3.4911 26257-41 54138 10 Oil pump cover (paper), 41-47 $3.4912 27376-28 54155 10 Float bowl nut washer $15.9913 27391-36 54158 10 Float bowl cover $4.9914 27410-39 54162 10 Intake manifold $7.9915 27411-40 54165 10 Intake manifold $7.4916 32521-36 25314 10 Distributor base, 36-47 $3.9917 33295-36 660371 10 Transmission side cover (4-speed), 36-47, Syntheseal $7.49- 34459-26 54183 10 Washer, shift shaft, 41-47 $6.99

18 34824-36 660400 10 Ratchet top, 36-47, Syntheseal $9.99- 35231-36 25320 10 Mainshaft cork washer, 36-47 $6.99

19 36025-36 660517 10 Countershaft end cap. 36-47 $5.4920 60540-36 12046 10 Primary cover (cork), 36-47 $19.9921 60565-36 12048 10 Clutch cover (cork), 36-47 $17.9922 60567-36 12050 10 Inspection cover (cork), 36-47 $4.49- 62702-52 54223 10 Drain plug, 36-47 $3.99

23 67141-36 54232 10 Speedometer drive to case, 36-47 $4.99Seals for Knucklehead Big Twins 36-47

- 17475-38 54056 5 Rocker arm, 38-47 $8.99- 17955-36 12058 100 Pushrod cover cork, small, 36-47 $13.49- 17955-36 12064 100 Pushrod cover rubber washer, small, 36-47 $32.99- 30145-46A 54061 10 Generator drive gear, 46-47 $10.99- 33076-37 19077 10 Kickstart shaft, 36-47 (square type seal) $6.99- 34036-36 54064 10 Shifter cam, 36-47 $5.99- 35230-39 25103 EA Mainshaft, 37-47, (double lip) $2.49- 37337-36 54205 10 Clutch pushrod cork, 36-47 $4.49

Hardware for Knucklehead Big Twins 36-47- 8873, 8866 54254 10 Check ball, oil pump, 36-47 $3.99- 11002 54000 10 Retaining ring, oil pump, 36-47 $2.49- 26340-36 54074 10 Key, oil pump, 36-47 $17.99- 26348-15 20095 10 Key, oil pump, 36-47 $5.99- 26348-36 54250 10 Retaining ring, oil pump, 36-47 $5.99

3 4 3 5

1 1

13

12

2 26 6

1415

16

20

22

21

18

10 11

7

98

23 19

17


Gaskets for Flathead Big Twins 37-48


1 16774-21 54107 10 Cylinder base, 37-48 $9.99- 18198-38 54279 10 Valve guide, 37-48 $2.49- 18259-39 54280 10 Lower valve cover, 37-48 $8.49- 18261-30 54284 10 Valve cover packing, 37-48 $4.99- 18630-26 54281 10 Valve cover and guide, 37-48 $3.492 18631-30 54275 10 Tappet guide, front and rear, 37-48 $3.493 24921-37 54278 10 Oil pump relief pipe, 37-48 $4.494 25227-37 54277 10 Gear case cover, 37-48 $9.99- 25811-11 54132 10 Neutral switch, 37-48 $3.995 26244-37 54276 10 Oil pump, 37-48 $7.996 26246-37 54134 10 Oil pump base and cover, 37-48 $3.99- 27376-28 54155 10 Float bowl nut washer $15.997 27410-39 54162 10 Intake manifold $7.99- 30138-30 54240 10 Generator end cover, 37-48 $3.998 30143-58 660511 10 Generator mount, 37-48, Synthseal $4.499 32522-37 25313 10 Distributor base, 37-48 $2.9910 33295-36 660371 10 Transmission side cover, 37-48, Syntheseal $7.49- 34459-26 54183 10 Washer, shift shaft, 37-48 $6.99

11 34824-36 660400 10 Ratchet top, 37-48, Syntheseal $9.99- 35231-36 25320 10 Mainshaft cork washer, 37-48 $6.99

12 36025-36 660517 10 Countershaft end cap, 36-47, Syntheseal $5.4913 60540-36 12046 10 Primary cover (cork), 37-48 $19.9914 60565-36 12048 10 Clutch cover (cork), 37-48 $17.9915 60567-36 12050 10 Inspection cover (cork), 37-48 $4.49- 62702-52 54223 10 Drain plug, 37-48 $3.99

16 67141-36 54232 10 Speedometer drive to case, 37-48 $4.99Seals for Flathead Big Twins 37-48

- 18245-39 54283 10 Pushrod cover cork, upper, 37-48 $3.49- 18257-39 54282 10 Pushrod cover cork, lower, 37-48 $6.99- 33076-37 19077 10 Kickstart shaft, 36-47 (square type seal) $6.99- 34036-36 54064 10 Shifter cam, 37-48 $5.99- 35230-39 25103 EA Mainshaft, 41-48, (double lip) $2.49- 37337-36 54205 10 Clutch pushrod cork, 37-48 $4.49

11 10

13

15

14

12162 2

7

9

11 6

8

4

35

Gaskets for 74" and 80" Flatheads from 37-48These gaskets and seals fit U, UL and ULH Big Twin models.

Flathead Big Twins


Motor Factory Engine Gasket Kits for RevTech EnginesState of the art gasket material composites have gone into producing gasket kits that will greatly improve the life of your engine. On the back side of each gasket kit will be a content label listing all the gaskets, O-rings and seals contained in each kit.• Allcovers,andintakegasketsaremadeofMicroporematerialthat

is best suited for a variety of cover application and is resistant to fuel and will not creep, crack or become brittle.

• Eachkitcomescompletewithallthenecessarygaskets,seals,and O-rings needed to completely rebuild your engine, or just portions of it.

Complete Engine Gasket Kits These kits do not include primary or transmission gaskets 658510 Complete engine gasket, seal & O-ring kit for RevTech 100"

and 88" engines with 97/98 Casting Marked Rocker Boxes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $65.99

658511 Complete engine gasket, seal & O-ring kit for RevTech 100" and 88" engines with 99/00 Casting Marked Rocker Boxes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $69.99

658512 Complete engine gasket, seal & O-ring kit for RevTech 110" and 100" 4x4 RevTech engines . . . . . . . . . . . . . . . . . . . . . . . . $87.99

Complete Top End Gasket KitsIncludes everything necessary to rebuild the engine from the cylinder base up.660489 Fits 100" and 88" RevTech engines with 99/00 casting marked

rocker boxes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $54.99

658513 Top end gasket, seal & O-ring kit for RevTech 110" and 100" 4x4 RevTech engines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $72.99

Rocker Box Gasket KitsIncludes silicone rubber gasket set for rocker box covers.54095 Fits 100" and 88" RevTech engines with 97/98 casting marked

rocker boxes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $31.99

660445 For 100 and 88 inch motors with 99/00 casting marks in the rockerboxes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $34.99

Replacement Sump-Plate Gaskets59784 Fits 88" and 100" RevTech engines (pack of 10) . . . . . . . . $17.99

658512

RevTech Gaskets


67

16

82

1

3

11

17 17

5

4

10

9

13

6 7

16

5

4

12

1416

15

Motor Factory Complete Engine Gasket Kits for Evolution Sportster ModelsState of the art gasket material composites have gone into producing gasket kits that will greatly improve the life of your engine. On the back side of each gasket kit will be a content label listing all the gaskets, O-rings and seals contained in each kit. • Headgasketsaremadeofahighperformancefacingmaterialwithgraphitecoatingon

steel core with fire ring. This multi-layer fiber/metal reinforced composite head gasket delivers improved combustion sealing strength along with excellent bolt load retention and outstanding resistance to blowout. With the graphite coating anti-stick properties will not stock upon disassembly

• Allcovers,andintakegasketsaremadeofMicroporematerialthatisbestsuitedforavariety of cover application and is resistant to fuel and will not creep, crack or become brittle

• Eachkitcomescompletewithallthenecessarygaskets,seals,andO-ringsneededtocompletely rebuild your engine, or just portions of it

Complete Engine Gasket Kits Complete engine kits for Evolution Sportster models include all the high-density gaskets, seals and O-rings necessary to rebuild the engine, transmission and oil pump of the specific model listed660433 Fits 883cc models 86-90. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$99.99

660434 Fits 883cc models 91-03. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$109.99

660300 Fits 883cc models 04-06. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$121.99

660437 Fits 1100cc models 86-87. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$87.99

660435 Fits 1200cc models 88-90. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$94.99

660436 Fits 1200cc models 91-03. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$104.99

660301 Fits 1200cc models 04-06. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$125.99

Top End Gasket KitsIncludes everything necessary to rebuild the engine from the cylinder base up.660438 Fits 883cc models 86-90 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$63.99

660439 Fits 883cc models 91-03 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$82.99

660302 Fits 883cc models 04-06. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$101.99

660442 Fits 1100cc models 86-87 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$68.99

660440 Fits 1200cc models 88-90 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$76.99

660441 Fits 1200cc models 91-03 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$82.99

660303 Fits 1200cc models 04-06. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$102.99

Rocker Box Gasket Kits

Includes gasket, seals, and washers necessary to install a 3-piece rocker cover on Evolution Sportster engines. Rocker box cover gaskets (left, right) are made of Hydro-Fused, the lower and upper gaskets are made of high temperature, oil resistant silicone. 04-06 kits include one piece rocker box gasket made of rubber coated steel (RCS). 660443 Fits Sportster models from 86-90 (cork seals, and gaskets) . . . . . . . . . . . . . . . . . . . . .$30.99

660445 Fits Sportster models from 91-03 (silicone rubber seals, and Hyrdo-Fused gaskets) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$34.99

660304 Fits Sportster models 04-06 (silicone rubber seals, and RCS gasket) . . . . . . . . . . . . .$24.99

5A

660304

660301


Gaskets for Sportster Models 86-12 (except XR1200)


1 16664-86C 660403 2 Cylinder head, 883cc 86-08 .048" (stock) graphite coated / fire ring $14.99

1 16664-86D 660576 2 Cylinder head, 883cc, 09-12 $18.99

- 16665-86 660404 2 Cylinder head, 1100cc 86-87 .048" graphite coated / fire ring $14.99

2 16770-84E 660346 2 Cylinder head, 1200cc 91-08 .060" graphite coated / fire ring $15.99

2 16770-84F 660577 2 Cylinder head, 1200cc, 09 $18.99

2 16773-85 660347 2 Cylinder head, 1200cc 88-90 .048" (stock) graphite coated / fire ring $15.99

2 16773-85 660348 2 Cylinder head, 1200cc 88-90 .060" thick, graphite coated / fire ring $17.49

2 16773-85 54105 10 Cylinder head, 1200cc 88-90 .043" thick, Teflon $59.99

3 16774-86E 660406 10 Cylinder base, 86-08, Hydro-Fused (except 2007-2008 XL1200N) $11.99

4 16778-84A 660350 10 Rocker cover to head, right, 86-02 Hydro-Fused $14.99

5 16779-84A 660352 10 Rocker cover to head, left, 86-02, Hydro-Fused $24.99

3 16789-04 660578 10 Cylinder base, 07-08 XL1200N, 09-12 all models $12.99

5A 16800-84A 660320 2 Rocker cover to head, 86-12, RCS $17.996 17353-86 54114 10 Rocker cover, 86-90, cork $27.996 17353-86A 092732 10 Rocker cover, 86-90, silicone $28.996 17353-89C 54083 10 Rocker cover, 91-03, silicone $32.997 17354-86 54115 10 Rocker cover, upper, 86-90, cork $28.997 17354-89 54084 10 Rocker cover, upper, 91-03, silicone $39.998 17358-84 54118 10 Rocker cover, inner, 86-90, cork $4.998 17358-84A 54082 10 Rocker cover, inner, 86-06, silicone $9.996 17362-07A 660570 10 Rocker cover, lower, 07-12 $154.998 17695-07A 660571 10 Rocker cover, inner, 07-12 $39.99- 17976-04 660311 10 Tappet cover, 04-12, Micropore $9.499 25263-86 660409 10 Cam cover, 86-90, Syntheseal $19.99- 25263-90C 660410 10 Cam cover, 91-99, Syntheseal $19.99- 25263-90D 660309 10 Cam cover, 04-12, Micropore $26.99- 25463-94A 54432 10 Clutch cover, 94-12 $4.99

10 26495-75 660411 10 Oil pump mount, 86-90 $7.49- 26495-89B 660412 10 Oil pump mount, 91-12 $6.99- 26638-00Y 660579 10 Oil cooling jets, piston, 04-12 $108.99

11 29058-77 660368 10 Air cleaner to carburetor, 86-87, Syntheseal $4.99

- 29059-88 660369 10 Air cleaner to CV carburetor, 88-03, Syntheseal $4.99

- 29062-95B 660333 10 Air cleaner to carburetor or throttle body, 04-12, Micropore $11.99

- 29313-95 660334 10 Filter element mounting, 04-12, Micropore $7.49

12 31488-81C 54179 10 Starter motor, 86-12 $4.49

13 32591-80 660370 10 Point cover (4-hole), 86-03, Syntheseall $5.99

14 34624-77 54186 10 Footrest boss, 86-90 $4.49

15 34955-75 660413 10 Primary cover, 86-90 silicone bead, Micropore $59.99

- 34955-89 660414 10 Primary cover, 91-03, silicone bead, Micropore $68.99

- 34955-04 660308 10 Primary cover, 04-12, silicone bead, Micropore $56.99

- 34986-04 660307 10 Chain inspection cover, 04-12 $79.9917 65324-83 12106 10 Exhaust port, early-style, 86-03 $25.99- 34990-08 660580 10 Chain inspection cover, 09-12 $7.99

17 65324-83B 12095 10 Exhaust port, late-style, 86-12 $28.99- 65781-82 54229 10 Exhaust crossover, 86-03 $34.99- 65927-00 660581 10 Exhaust interconnect, 04-12 $72.99

Gaskets for Sportster Models 86-12 (except XR1200)


O-Rings for Sportster Models 86-12 (except XR1200)- 10957 660572 10 Starter housing, 07-12 $46.99

- 11105 19485 10 Drain plug, engine, 86-03; Drain plug, primary, 04-12 $2.99

- 11110 54001 10 Tappet guide, 86-90 $1.49- 11113 660573 10 Mainshaft, 5th gear, 06-12 $16.99- 11116 54261 10 Starter housing, 86-06 $2.99- 11120 660559 10 Engine oil dipstick, 04-12 $2.49- 11132 25300 10 Pushrod cover, middle, 86-90 $1.99

- 11139 54005 10 Primary filler/inspection plug, 86-90 $2.49

- 11145A 54006 10 Pushrod cover, lower, 86-90 $2.49- 11157 54009 10 Pushrod cover, upper, 86-90 $3.99- 11167 54011 10 Tappet guide, upper, 86-90 $3.99- 11168 54012 10 Tappet guide, lower, 86-90 $4.99

- 11171 54182 10 Starter mounting, 86-03; Inspection cover screw, 91-12 $2.49

- 11176 54419 10 Anti-rotation pin, 91-03 $2.49- 11179 54269 10 Clutch cable, 1988-2009 $6.99- 11187 54430 10 Clutch inspection cover, 91-03 $3.99

- 11188 54431 10 Primary chain inspection cover, 91-03 $4.49

- 11190 54429 10 Pushrod cover, upper, 91-12 $7.99- 11202 660582 10 Breather, air cleaner, 04-12 $10.99

- 11289A 53893 10 Transmission speed sensor, 04-12; Crank position sensor, 04-12 $2.49

- 11377 660521 10 Pushrod cover, lower, 04-12 $6.99- 26432-76A 54014 10 Cylinder stud (.062"), 86-07 $6.49- 26433-77 54015 10 Oil pump check valve, 86-E87 $1.99- 26434-76A 54148 10 Oil pump cover, 86-90 $7.49- 26434-91 54411 10 Oil pump cover, 91-12 $4.49

Seals for Sportster Models 86-12 (except XR1200)- 11124 54043 10 Timer compartment, 86-03 $11.49- 11148 54008 5 Oil filter mount, 86-90 $8.49- 11165 54010 10 Mainshaft (quad seal), 91-05 $9.99- 11291 53892 10 Map sensor, 04-06 $14.99- 12030 660574 10 Mainshaft, 91-12 $26.99- 12036A 54047 5 Oil pump cover, 86-90 $3.99- 12049 54053 10 Mainshaft (double lip), 86-90 $11.49- 12050 54054 EA Mainshaft, 5th gear, 91-94 $4.99- 12067B 54425 10 Mainshaft, 5th gear, 95-05 $46.99- 12068 53894 10 Sprocket shaft, 04-12 $28.99- 12074 660558 5 Mainshaft, 5th gear, 06-12 $89.99- 17393-07 660583 10 Breather, rocker cover, 07-12 $101.99- 17944-89 54418 10 Pushrod cover, lower, 91-03 $36.99- 18001-83A 99196 4 Valve stem, 86-03 $9.99- 18094-02A 660305 10 Valve stem, 04-12 $52.99- 26856-89 54414 10 Umbrella valve, rocker cover, 91-03 $4.49- 26995-86A 54150 10 Intake manifold, 86-87, late 89-12 $19.99- 27002-89 54422 10 Carburetor to manifold, 91-06 $37.99- 35151-74 54065 EA Sprocket shaft, 86-03 $4.99- 37101-84B 54066 EA Shift lever shaft, 86-05 $3.49- 37107-06 660575 10 Shift lever shaft, 06-12 $89.99

Hardware for Sportster Models 86-12 (except XR1200)- 6288 660584 10 Washer, neutral switch, 00-12 $39.99- 6589 660585 10 Washer, rocker cover screws, 09-12 $39.99

27714-06 660586 10 Seal ring, O2 sensor, 07-12 $28.99- 11002 54000 10 Retaining ring, oil pump, 91-09 $2.49- 26497-75 54260 10 Retaining ring, oil pump, 86-90 $3.49

16 63858-49 54227 10 Washer, rocker cover screws, 86-08; Oil level plug, 86-90 $2.99

Evolution Sportster


660480

9

2

10

164

15

1

14

6

5

3

12

7

8

13

Complete Engine Gasket KitsComplete engine kits for Evolution Sportster models include all the high-density gaskets, seals and O-rings necessary to rebuild the engine, transmission and oil pump of the specific model listed660475 72-E73 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$30.99

660476 Late 73-76. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$35.99

660477 77-81 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$59.99

660478 82-85 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$54.99

660476

Top End Gasket KitsIncludes include all the high-density gaskets, seals and O-rings necessary to rebuild the engine from the cylinder base up. 660485 72-E73 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$27.99

660480 Late 73-76. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$18.49

660481 77-81 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$34.99

660486 82-85 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$36.99


Gaskets for Sportster Models 72-85

No. OEM# Motor Factory


1 16769-72A 12071 10 Cylinder head, 72-E73 $54.992 16769-73 12072 10 Cylinder head, late 73-85 $24.993 16769-82 54102 10 Cylinder head, low compression, 79-85 $60.994 16774-72 660405 10 Cylinder base, 72-85, Micropore $9.495 17536-70 660408 10 Rocker arm cover, 72-85, Micropore $9.99- 24978-57 54126 10 Oil strainer, 72-76, Micropore $5.996 25224-52A 660391 10 Cam cover, 72-81, Micropore $23.997 25263-81 660512 10 Cam cover, 82-85 $22.99- 26256-52 660514 10 Oil pump to crankcase, 72-76, Resin Reinforced $5.99- 26258-52 54140 10 Oil pump cover, outer, 72-76 $10.99- 26259-52 54143 10 Oil pump cover, inner, 72-76 $6.99- 26495-75 660411 10 Oil pump mount, 77-85, Resin Reinforced $7.498 27023-71 54151 10 Carburetor to intake manifold, Bendix, 72-85 $2.999 29058-77 660368 10 Air cleaner to carburetor, late 76-85, Syntheseal $4.99

10 30143-58 660511 10 Generator mount, 72-E84, Syntheseal $4.49- 31460-70 54176 10 Starter mount, 72-E79 XLCH $7.99- 31471-67A 54177 10 Starter housing, 72-80 $8.99- 31488-77 54178 10 Starter mount, 72-80 $3.99- 31488-81C 54179 10 Starter mount, 81-85 $4.49

12 32591-80 660370 10 Point cover (4 hole), 72-85, Syntheseal $5.99- 34624-77 54186 10 Footrest boss, 77-85 $4.49

13 34955-67 660354 10 Primary cover, (aluminum), 72-76, Micropore $28.9914 34955-75 660413 10 Primary cover, 77-85, silicone bead, Micropore $59.9915 35169-52 25318 10 Mainshaft seal retainer plate, 72-early 84 $4.9916 60645-65 54212 10 Solenoid mount, 72-80 $5.49- 62628-66 25334 10 Oil tank filler cap (cork washer), 72-78 $8.49- 62702-52 54223 10 Transmission and sump drain, 72-79 $3.99- 63858-49 54227 10 Oil level plug, 72-85 $2.99- 65781-82 54229 10 Exhaust crossover, 82-85 $34.99

O-Rings for Sportster Models 72-85- 11100 19484 10 Tappet guide, 72-85 $1.49- 11101 12082 10 Rockershaft, 72-85; Upper pushrod cover, late 79-83 $1.49- 11105 19485 10 Drain plug, engine, 77-85 $2.99- 11106 092506 10 Primary filler and inspection cap, 72-E78 $3.99- 11116 54261 10 Starter housing, 81-85 $2.99- 11132 25300 10 Pushrod cover, middle, late 79-85 $1.99- 11139 54005 10 Primary filler cap and inspection cap, late 78-85 $2.49- 11157 54009 10 Pushrod cover, upper, 84-85 $3.99- 11171 54182 10 Starter mounting, 81-85 $2.49- 26432-76A 54014 10 Oil pump body, 77-85 $6.49- 26433-77 54015 10 Oil pump check valve, 77-85 $1.99- 26434-76A 54148 10 Oil pump cover, 77-85 $7.49- 27060-55 12085 10 Intake manifold, 72-E78 $3.99- 27312-76 092539 10 Accelerator pump passage, Keihin carburetor, 76-E78 $7.99

Seals for Sportster Models 72-85- 11124 54043 10 Timer compartment, 72-85 $11.49- 12036A 54047 5 Oil pump outer plate, 77-85 $3.99- 12049 54053 10 Mainshaft (double lip), late 84-85 $11.49- 17955-36 12058 100 Pushrod cover cork, small, 72-E79 $13.49- 17955-36 12064 100 Pushrod cover rubber washer, small, 72-E79 $32.99- 26227-58 54058 10 Oil pump body, 72-76 $9.99- 27062-78 25102 10 Intake manifold clamp, late 78-85 $22.95- 30145-46A 54061 10 Generator drive gear, 72-81 $10.99- 33076-37 19077 10 Kick start shaft, 72-85 (square type seal) $6.99- 34035-52 54063 10 Shift lever shaft, 72-85 $9.99- 35151-52A 25317 10 Sprocket shaft, 72-76; Mainshaft, 72-early 84 $14.99- 35151-74 54065 EA Sprocket shaft, 77-85 $4.99- 63529-57 12074 10 Oil line sleeve, 72-85 $2.49

Hardware for Sportster Models 72-85- 8866, 8873 54254 10 Check ball, oil pump, 72-76 $3.99- 11002 54000 10 Retaining ring, oil pump, 72-76 $2.49- 26348-15 20095 10 Key, oil pump, 72-76 $5.99- 26497-75 54260 10 Retaining ring, oil pump, 77-85 $3.49

Sportster 1972 - 1985


Motor Factory Top End Gasket Kit for Sportster Models from 57-71Complete engine kits for Sportster models include all the high-density gaskets, seals and O-rings necessary to rebuild the engine from the cylinder base up.660479 Fits 900cc models from 57-71. . . . . . . . . . . . . . . . . . . . . . . . . . .$19.99

Motor Factory Top End Gasket Kit A complete engine kit for all Sportster models from 57-85 regard- less of engine size. Includes all of the high-density gaskets, seals and O-rings necessary to rebuild the engine from the cylinder base up.660488 Complete kit (replaces OEM 17030-57) . . . . . . . . . . . . . . . . .$44.99

Motor Factory Complete Gasket Kit for Sportster Models from 57-71Complete engine kits for Sportster models include all the high-density gaskets, seals and O-rings necessary to rebuild the engine, transmis-sion and oil pump of the specific model listed.660474 Fits 900cc models from 57-71. . . . . . . . . . . . . . . . . . . . . . . . . . .$39.99

23

41

10

6

9

8

5

7

Sportster


Gaskets for Sportster Models 57-71

No. OEM# Motor Factory

PK Qty Description Price

1 16769-57 12109 10 Cylinder head, 57-E71 $23.99

1 16769-57 12070 10 Cylinder head, 57-E71, Teflon $31.99

1 16769-72A 12071 10 Cylinder head, late 71 $54.99

2 16774-57 660392 10 Cylinder base, 57-71, Micropore $7.49

3 17536-70 660408 10 Rocker arm cover, 70-71, Micropore $9.99

- 24978-57 54126 10 Oil strainer, 57-71 $5.99

4 25224-52A 660391 10 Cam cover, 52-71, Micropore $23.99

- 26256-52 660514 10 Oil pump to crankcase, 52-71, Resin Reinforced $5.99

- 26258-52 54140 10 Oil pump cover, outer, 52-E62 $10.99

- 26258-62 54141 10 Oil pump cover, outer, late 62-71 $9.99

- 26259-52 54143 10 Oil pump cover, inner, 52-E62 $6.99

- 26259-62 54144 10 Oil pump cover, inner, late 62-71 $5.99

- 27410-57 660398 10 Intake manifold, 57-65, Syntheseal $5.49

5 30143-58 660511 10 Generator mount, 58-71, Syntheseal $4.49

- 31461-70 54176 10 Starter mount, 70-71 XLCH $7.99

- 31471-67A 54177 10 Starter housing, 67-71 $8.99

- 31488-77 54178 10 Starter mount, 67-71 $3.99

6 32591-80 660370 10 Point cover (4-hole), 70-71, Syntheseal $5.99

7 34952-52 12958 10 Primary cover (tin), 58-69 XLCH $21.99

8 34955-67 660354 10 Primary cover (aluminum), 67-71 XLH, 70-71 XLCH, Micropore $28.99

9 35169-52 25318 10 Mainshaft seal retainer plate, 52-71 $4.99

- 37762-52 12052 10 Clutch cover, 54-70 $9.99

- 60567-36 12050 10 Chain cover hole, 58-69 XLCH $4.49

10 60645-65 54212 10 Solenoid mount, 67-71 $5.49

- 62628-66 25334 10 Oil tank filler cap (cork washer), late 66-71 $8.49

- 62702-52 54223 10 Transmission and sump drain, 57-71 XLH, 58-71 XLCH $3.99

- 63858-49 54227 10 Oil level plug, 71 $2.99

O-Rings for Sportster Models 57-71- 11100 19484 10 Tappet guide, 57-71 $1.49

- 11101 12082 10 Rockershaft, 57-71; Magneto mount, 65-E68 XLCH $1.49

- 11102 54263 10 Distributor, 66-69 XLH $2.99

- 11103 12083 10 Clutch gear, late 57-69 $2.99

- 11106 092506 10 Primary filler and inspection cap, 71 $3.99

- 11107 19486 10 Carburetor adapter, 66-71 $2.99

- 11110 54001 10 Tachometer plug, late 62-69 XLCH $1.49

- 11119 25303 10 O-ring, clutch gear for 67-70 XLH and 70 XLCH (repl. OEM 11119) pack of 10 $4.49

- 27060-55 12085 10 Intake manifold, 57-71 $3.99

Seals for Sportster Models 57-71- 11124 54043 10 Timer compartment, 71 $11.49

- 17955-36 12058 100 Pushrod cover cork, small, 57-71 $13.49

- 17955-36 12064 100 Pushrod cover rubber washer, small, 57-71 $32.99

- 26227-58 54058 10 Oil pump body, late 58-71 $9.99

- 30145-46A 54061 10 Generator drive gear, 54-71 $10.99

- 33076-37 19077 10 Kickstart shaft, 57-71 (square type seal) $6.99

- 34035-52 54063 10 Shift shaft, 54-71 $9.99

- 35151-52A 25317 10 Mainshaft, 54-71; Sprocket shaft, 54-71 $14.99

- 37339-53 54067 10 Clutch rod, 54-70 $4.99

- 37531-56B 25321 5 Oil seal, clutch gear for 56-66 XLH, XLCH, and 67-69 XLCH (repl. OEM 37531-56B) pack of 5 $4.99

- 37740-57 25322 5 Oil seal, clutch shell for late 57-66 XLH, XLCH, and 67-69 XLCH (repl. OEM 37740-57) pack of 5 $5.99

- 37741-67 25323 5 Clutch hub, 67-70 XLH, 70 XLCH $7.99

- 63529-57 12074 10 Oil line sleeve, 57-71 $2.49

Hardware for Sportster Models 57-71- 8866, 8873 54254 10 Check ball, oil pump, 54-71 $3.99

- 11002 54000 10 Retaining ring, oil pump, 56-E62 $2.49

- 26340-36 54074 10 Key, oil pump, 60-71 $17.99

Sportster 1957-1971


Motor Factory Oil Pump Kit for Sportster and K Models from 52-76Provides everything required to service the early-style oil pump and fits Sportster models from 57-76 and K or KH models from 52-56. Components of this kit are available separately.660483 Fits K, KH and Sportster models, 52-76 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $23.99

660446 Fits Sportster models 77-85 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $9.99

Gaskets (packs of 10 each)660514 Oil pump-to-crankcase, 52-76 (repl. OEM 26256-52) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $5.99

54140 Oil pump cover, outer. Fits 52-E62 K, KH, XLCH, 72-76 XLH, XLCH (repl. OEM 26258-52) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $10.99

54141 Oil pump cover, outer, late 62-71 (repl. OEM 26258-62) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $9.99

54143 Oil pump cover, inner. Fits 52-E62 K, KH, XLCH; 72-76 XL (repl. OEM 26259-52) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $6.99

54144 Oil pump cover, inner, late 62-71 (repl. OEM 26259-52) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $5.99

Seals (packs of 10 each)54058 Oil pump body, late 58-76 (repl. OEM 26227-58) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $9.99

Hardware (packs of 10 each)54254 Check ball, 54-76 (repl. OEMs 8873, 8866) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $3.99

54000 Retaining ring, 56-E62, 72-76 (repl. OEM 11002) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $2.49

54074 Key, 60-71 (repl. OEM 26340-36) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $17.99

20095 Key, 72-76 (repl. OEM 26348-15 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $5.99

54143 54137 54140

54141 54144660483

Motor Factory Oil Pump Gasket Kits from 86-11Kits contains state of the art in gasket technology and include all gaskets, seals and O-rings necessary to rebuild stock oil pumps.660446 Fits Sportster models 86-90 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$9.99

660447 Fits Sportster models 90-12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$5.99

660447660447


Motor Factory Oil Pump Kits for Big Twin Models from 68-99Provide everything necessary for aluminum-bodied oil pumps. Fits Shovelhead and Evolution Big Twin models from 68-99. Eliminates confusion over which type of material is required for the body and cover gaskets by providing both. Components are available sepa-rately.Note: The thickness and torque applied to the different pump body and cover gasket mate-rials is not the same, and is dictated not by the year of production, but by the design of the cover.

660462 Aluminum-bodied oil pump kit, 68-91 . . . . . . . . . . . . . . . . . .$13.99

660463 Aluminum-bodied oil pump kit, 92-99 . . . . . . . . . . . . . . . . . .$27.99

O-Rings (packs of 10 each)19485 Tappet screen plug, late 70-10; Oil pump check valve plug, late

78-10; Relief valve plug, 81-10 (repl. OEM 11105) . . . . . . . . .$2.99

54423 Oil pump end cap, 92-99 (repl. OEM 11241) . . . . . . . . . . . . . .$2.49

Seals (packs of 10 each)54058 Oil pump body, 68-99 (repl. OEM 26227-58) . . . . . . . . . . . . . .$9.99

Gaskets (packs of 10 each)54131 Felt washer, relief valve, 54-80 (repl. OEM 26231-78) . . . . . .$7.49

54135 Oil pump body, plastic, 68-80 (repl. OEM 26246-68A) . . . . . .$3.49

54142 Oil pump cover, plastic, 68-80 (repl. OEM 26258-68B). . . . . .$6.99

660364 Oil pump body, paper, 81-91 (repl. OEM 26273-80B). . . . . . .$5.99

660365 Oil pump body, paper, 92-99 (repl. OEM 26273-92) . . . . . . .$6.99

660366 Oil pump cover, paper, 81-91 (repl. OEM 26276-80A) . . . . . .$9.49

660367 Oil pump cover, paper, 92-99 (repl. OEM 26276-92) . . . . . . .$7.49

Hardware (packs of 10 each)54252 Brass washer, oil pump, late 50-86 (repl. OEM 6377) . . . . . .$4.49

54253 Brass washer, relief valve plug, 54-78 (repl. OEM 6581) . . . .$9.49

54254 Check ball, 36-47 (repl. OEMs 8873, 8866) . . . . . . . . . . . . . . . .$3.99

54000 Retaining ring, 36-99 (repl. OEM 11002) . . . . . . . . . . . . . . . . .$2.49

20095 Key, 36-99 (repl. OEM 26348-15). . . . . . . . . . . . . . . . . . . . . . . . .$5.99

54250 Retaining ring, 36-98 (repl. OEM 26348-36) . . . . . . . . . . . . . .$5.99

Motor Factory Oil Pump Kit for Big Twin Models from 36-67Provides everything necessary for the steel-bodied oil pumps fitted to Knucklehead, Panhead and Shovelhead Big Twins from 36-67. This kit covers all of the pump variations including governor fitted models, and the components are available separately.54214 Steel-bodied oil pump kit, 36-67. . . . . . . . . . . . . . . . . . . . . $22.99

Gaskets (packs of 10 each)660394 Oil pump body, 41-67 (repl. OEM 26245-41) . . . . . . . . . . . $9.49

54545 Oil pump cover, 36-40 (repl. OEM 26255-36) . . . . . . . . . . $3.99

54136 Oil pump cover, governor fitted, 41-49 (repl. OEM 26255-41) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $3.49

54138 Oil pump cover, 41-early 50 (repl. OEM 26257-41) . . . . . $3.49

660395 Oil pump cover, late 50-67 (repl. OEM 26257-50A) . . . . . $8.99

Hardware (packs of 10 each)54252 Brass washer, oil pump, late 50-86 (repl. OEM 6377) . . . $4.49

54253 Brass washer, relief valve plug, 54-78 (repl. OEM 6581) . $9.49

54254 Check ball, 36-47 (repl. OEMs 8873, 8866) . . . . . . . . . . . . . $3.99

54000 Retaining ring, 36-99 (repl. OEM 11002) . . . . . . . . . . . . . . $2.49

54074 Key, 36-67 (repl. OEM 26340-36) . . . . . . . . . . . . . . . . . . . . $17.99

20095 Key, 36-99 (repl. OEM 26348-15). . . . . . . . . . . . . . . . . . . . . . $5.99

54250 Retaining ring, 36-98 (repl. OEM 26348-36) . . . . . . . . . . . $5.99Note: The thickness and torque applied to the different pump body and cover gasket materials is not the same, and is dictated not by the year of production, but by the design of the cover.

54133

54545

54138 54139

54142

54135

54147

54146

54136

Intake Seals for Sportster Models & Big Twin ModelsCarburetor to intake manifold seals for Big Twin and Sportster models with CV carbs from 91-06 (pack of 10).54422 Replaces OEM 27002-89 (pack of 10). . . . . . . . . . . . . . . . .$37.99

54422


Motor Factory ‘Tuff Seal’ Exhaust Port GasketsThe finest exhaust port gasket available. Born on the track, they inherited their racing lineage from head gaskets used in high-horse-power applications. The ‘Tuff Seal’ is a metal-core, silicone-impreg-nated material that has a tough alloy ring around the inside edge to keep exhaust gases from escaping and to ensure a faultless pipe-to-head seal. Fit Shovelheads from 66-84.12100 Pack of 10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$17.99

Motor Factory Exhaust Port GasketsThese knitted wire-mesh crush gaskets are available in either the early-style or the later-style which has been used since 1991. They may be installed in all Evolution or Twin Cam 88 motors when fitting Original Equipment or aftermarket exhaust systems. Packs of 10.12106 Early (repl. OEM 65324-83). . . . . . . . . . . . . . . . . . . . . . . . . . . . .$25.99

12095 Late (repl. OEM 65324-83A). . . . . . . . . . . . . . . . . . . . . . . . . . . .$28.99

12095

12106


General Warnings Motorcycle riding is a dangerous activity. The only way to be sure to avoid injury is not to ride! Even if you use the finest and best-maintained equipment, wear a helmet and protective clothing, and take all possible precautions, it is not possible to avoid every risk. Motorcycle accidents frequently result in serious injury, including death. Please do not operate a motorcycle or other motor vehicle when you are tired or under the influence of alcohol or drugs, or when your perception is impaired for any other reason. At all times, please wear a helmet, ride carefully and within posted speed limits, and obey all other traffic regulations and instructions from law enforcement personnel.Custom Chrome, sells aftermarket motorcycle parts for Harley-Davidson® and other brands. If you do not have the necessary experience and skill, please have a qualified mechanic install any new or replacement part on your motorcycle. The failure to install properly and test any new or replacement component could adversely affect your motorcycle’s operation and result in an accident, including a fatal accident. Federal and state laws and regulations impose restrictions on modifying the engine, ignition, exhaust and other components of a motorcycle intended for on-road use. In addition, these laws and regulations impose requirements on windshields, brake components, lighting, and other equipment on your motorcycle. Accordingly, certain parts in this catalog are for competition or display purposes only. In general, those parts are indicated by a “Competition” mark: a checkered flag in a yellow oval.If you are a retail customer, you are responsible to know the laws and regulations that govern the modification of your motorcycle. Custom Chrome is not responsible if you modify your motorcycle or any component in violation of law. If you have any questions regarding a particular component, please consult your dealer or a qualified motorcycle mechanic.The following is additional information relating to components for sale in various sections of this catalog. This information is not exclusive – if you have any questions regarding the installation or use of any component, please contact your dealer, a qualified mechanic, or Custom Chrome’s customer service department.

Any “add-on” or “modified” emissions-related parts contained in this brochure that are subject to anti-tampering laws may or may not have been evaluated and/or exempted by CARB. As a distributor, Custom Chrome makes no representation or warranty with respect to whether the emissions-related parts in this brochure are legal for sale, installation or use in any state unless the part is installed in a vehicle used only for closed-course competition. Consult with the manufacturer as to any such exemptions before purchasing any add-on or modified emissions-related parts for non-competition use in California or elsewhere.

© COPYRIGHT 1982-2013 BY CUSTOM CHROME - A DIVISION OF DAE-IL USA, INC.

ALL RIGHTS RESERVED. NO PART OF THIS PUBLICATION MAY BE REPRODUCED, STORED IN A RETRIEVAL SYSTEM OR TRANSMITTED IN ANY FORM OR BY ANY MEANS; ELECTRONIC, MECHANICAL, PHOTOCOPYING, RECORDING, OR OTHERWISE WITHOUT PRIOR WRITTEN PERMISSION OF THE PUBLISHER.


18225 Serene Drive | Suite 150 | Morgan Hill, CA 95037 | Printed in USA

World’s Finest Products For Harley-Davidsons

ServiceCustomizationRepairPerformance

Maintenance

Documents

Gaskets - Custom Chrome · 6 *Prices shown are suggested retail prices only. Actual retail prices are determined by each dealer and may vary. Gaskets for Twin Cam Models