GasesGases

11

Describe a gas sample. Describe the position and motion of atoms/molecules in a sample.

• Gases assume the volume and shape of their containers.

• Gases are the most compressible state of matter.

• Gases will mix evenly and completely when confined to the same container.

• Gases have much lower densities than liquids and solids.

22

3333

44

Pressure = force/areaPa = N/m2

1 atm = 760 torr = 760 mm Hg = 101.3 kPa

Sea level 1 atm

4 miles 0.5 atm

10 miles 0.2 atm

Atmospheric Pressure: pressure exerted by Earth’s atmosphere; measured by a barometer

Standard atmospheric pressure: column of mercury is 760 mm high at 0oC at sea level.

What is 475 mmHg in atm?

55

Which image shows Patm > Pgas?

What causes the observed ideal gas behavior?

Model of gases is Kinetic Molecular Theory◦ 1. A gas consists of tiny particles, either atoms

or molecules, moving about at random. low density and compressible

◦ 2. Volume of particles is negligible compared to the total volume of the gas; most of the volume is empty space Xe at STP, only 0.025% of the volume is

occupied by the atoms77

◦ 3. Gas molecules move independently of one another no intermolecular forces to attract

atoms/molecules◦ 4. Pressure arises from collisions of atoms/

molecules with walls of containers no net energy loss from collisions pressure is proportional to number of moles

◦ 5. Average kinetic energy (KE) is proportional to the Kelvin temperature (T)

88

Gas Simulation

Ideal gas: pressure-volume-temperature behavior can be accounted for by the ideal gas equation◦ Many gases behave ideally at 0oC and 1 atm

STP = Standard temperature (0oC = 273.15K) and pressure (1 atm) ◦ Convert variables to Kelvin and atm to correctly solve

problems K = oC + 273.15; 1 atm = 760 torr

Ideal gases behave according to the Ideal Gas Law: PV = nRT

http://mc2.cchem.berkeley.edu/Java/molecules/index.html

We can calculate volume of 1 mole of gas at 0oC and 1 atm. How many molecules (or atoms) will be in this sample?

1 mol = 22.414 L

What is the volume of 0.5068 g of nitrogen gas at STP?

How many grams of neon gas will occupy a volume of 1.0 L at STP?

What happens if the pressure on the outside of a balloon is increased? What happens to the atoms inside the balloon?

What causes the can to be crushed?

Crushing can bescaled up a little!

Can crush

1414

Bicycle Pump

http://preparatorychemistry.com/Bishop_Boyles_frames.htm

Boyle’s Law

Why does a bag of potato chips expand as you drive from Phoenix to Flagstaff?

If a closed bag holds 0.568 L of gas at 0.989 atm, what is the volume of the bag if the pressure is decreased to 0.822 atm?

P1V1 = P2V2

V2 = 0.683 L

What happens if the balloon is slowly heated? What will happen to the atoms inside?

Charles and Gay-Lussac

1717

Balloons in LN2

If a balloon holds 3.97 L of gas at 2.0oC, what will the volume be if the temperature of the gas increases to 90.0oC?

V1/T1 = V2/T2

V2 = 5.24 L

What happens as more atoms are added to the balloon? Where have you experienced this before?

Avogadro’s Law

2020Figure 9.9

If we have a closed container that holds 1.08 moles of gas with a volume of 16.7 L. What will be the new volume of the container if 0.65 more moles of gas are injected?

V1/n1 = V2/n2

V2 = 26.8 L

Boyle’s Law (T, n constant)◦ PV = constant P1V1 = P2V2

Charles’ Law (P, n constant)◦ V / T = constant V1/T1 = V2/T2

Avogadro’s Law (P, T constant)◦ V / n = constant V1/n1 = V2/n2

Combined Gas Law (n constant)◦ P1V1 / T1 = P2V2 / T2

2222

Pressure inbasketball

http://mc2.cchem.berkeley.edu/Java/molecules/index.html

Gas Simulation

Draw the level of the piston in (a) and (b) under the specified conditions.

increase the pressure of a container at constant temperature?

increase temperature at constant pressure?

increase the temperature at a constant volume?

Increase number of gas particles?Cons Vol

Double Atoms

Dec VolCons Atoms

Inc TempCons Vol

http://www.mhhe.com/physsci/chemistry/essentialchemistry/flash/gasesv6.swf

A small bubble rises from the bottom of a lake, (T = 8.0oC, P = 6.41 atm, V = 2.1 mL) to the water’s surface (T = 25.0oC, P = 1.02 atm). What is the final volume of the bubble?

If a closed cylinder holds 50.0 L of O2 gas at 18.5 atm and 21.0oC, what volume will the gas occupy if the temperature is maintained while the pressure is reduced to 1.00 atm?

The volume of a nitrogen cylinder is 11.28 L. What mass of nitrogen gas is in the cylinder if the pressure is 775 torr and the temperature is 5.3oC?14 mL; 925 L; 14 g N2

There are 2 methods for solving these problems. ◦ If 2 variables in Ideal Gas Law are unknown, use

stoichiometry first to find moles of gas (n) to plug into equation.

◦ If only 1 variable in Ideal Gas Law is unknown, solve it first, then use moles of gas (n) in stoichiometry.

What is the volume of CO2 produced at 370 C and 1.00 atm when 5.60 g of glucose are used up in the reaction:

C6H12O6 (s) + O2 (g) --> CO2 (g) + H2O (l)

2626

N2(g) + H2(g) NH3(g) How many grams of ammonia can be made with

689 L of hydrogen and excess nitrogen at 350oC and 7.80 atm?

Answer: How many L of O2 are needed to react 28.0 g

NH3 at 24°C and 0.950 atm?

NH3(g) + O2(g) NO(g) + H2O(g)

• Answer:

2727

airbags

What mass of solid sodium azide (NaN3) is needed to generate 75.2 L of nitrogen gas (and solid sodium) at 100.0oC and 1.00 atm?

(Hint: Start with a balanced chemical equation!)

Gas densities (d), units of g/L◦ Use MM, P, R, and T to solve

Molar mass (MM), units of g/mol◦ Use d, P, R, and T to solve

Use units to arrange variables to solve for density and molar mass

2929

Calculate the density of bromine gas at 50.0oC and 785.0 torr.

3030

Pouring Br2

An unknown diatomic gas has a density of 3.164 g/L at STP. What is the identity of the gas?

Answer: Cl2

3131

Dalton’s Law of Partial Pressures: In a mixture of gases, each exerts a partial pressure the same as it would exert alone.

3232

We can only measure the total pressure of a system

Knowing what fraction of moles belong to each gas, we can calculate their partial pressures.

Mole fraction:◦ XA = nA / (nA + nB) (moles of A ÷ total moles)

Calculating partial pressure:◦ PA = XA * PT (mole fraction * total pressure)

A mixture of gases contains 0.102 mol of CO, 0.598 mol of CO2, and 0.679 mol of O2. Calculate the mol fraction and partial pressures of the gases if the total pressure is 1.50 atm at room temperature.

Answers:◦ XCO = 0.0739; PCO = 0.111 atm

◦ XCO2 = 0.434; PCO2 = 0.651 atm

◦ XO2 = 0.492; PO2 = 0.738 atm

Diffusion: gradual mixing of one gas with another (applet link)◦ Lighter gas diffuses more quickly than heavier gas

Effusion: escape of a gas through a pinhole (used to separate different mass species)

3737

effusion

Molecular Speeds depend on Temperature:

3838

Avg KE of gas

Which molecule will escape from a leaky balloon fastest?

3939

Which gas in each pair below will effuse faster?

CH4 and N2

O2 and CO2 CO and NH3

Cl2 and H2

Kr and SO2