Only the BEST gas supply components are good enough!

• Focus on Health, Safety, Sta� , and Environment

• Maintain gas purity from cylinder to point of use

• Endurance under safe user conditions

• For o� shore, near-shore, and onshore use

• BAM Certi� ed for oxygen use

• Focus on Health, Safety, Sta� , and Environment

• Maintain gas purity from cylinder to point of use

• Endurance under safe user conditions

• For o� shore, near-shore, and onshore use

• BAM Certi� ed for oxygen use

GAS SUPPLY COMPONENTS FOR THE

OIL & GAS INDUSTRYLike in each industry, controlled gas supply is relevant for optimal and safe operations. In upstream Oil & Gas the stakes are often higher; Health & Safety of Sta� , Protection of the Operations and the Reduced Risk for the Environment are our key focuses. GCE druva pressure regulators & valves are designed to meet the highest standards & quality, to be durable, and to be easy operate.

GCE DRUVA OFFERS A FULL RANGE OF GAS SUPPLY INSTRUMENTS AND COMPONENTS FOR YOUR SAFE OPERATIONS!

Proper gas supply regulation is essential for optimized operations & safety of sta�. Over-pressurization can create a dangerous situation; under-pressurization can lead to loss of operating time.

GCE druva is a known brand in gas supply components, like cylinder valves, pressure regulators, valves, hoses, and all types of accessories. It stands for delivering high-quality solutions for a�ordable prices and delivering state-of-class service & support.

GCE druva has the right range of regulators to control and actuate your valves.

TYPICAL APPLICATIONS ARE:

• Valve automations Systems (VAS)• Emergency Shut-Down (ESD) / HIPPS• Choke Panels• Surface Controlled Subsurface Safety Valve (SCSSV)• Pressurized Seals

All components are safe certi�ed for use onshore, near-shore, and o�shore on any oil & gas related application.

GCE DRUVA HAS THE RIGHT REGULATORS & VALVES FOR OXYGEN APPLICATION IN DIVING & LIFE SUPPORT

• (Pre-programmed) Pressure control runs for decompression / recompression

• Exact and continuous air pressure control in diving chambers, open diving bells, and for hard helmet applications

• BIBS Mechanical failure protection system - limit the maximum suction on a diver’s lungs

• Eliminate oxygen buildup or contamination of the chamber - control air quality presence (incl. dumping of exhaled breath & CO2 scrubbing).

Proper handling of critical high purity gases requires the highest quality of control equipment.

GCE druva supplies a wide range of components and systems to handle and control specialty gases.

GCE Healthcare has a special range of products for patient respiratory support, for use in life support vessels, for mobile use and for mobile & remote emergency service.

The MediSelect is the most �exible pressure regulator available for emergency patient respiratory support.

THE MEDISELECT OFFERS:

• Innovative self-centering hand-knob for exact �ow setting

• Flexible step wise �ow set options – 7l/min – 15l/min – 25l/min

• Guaranteed continuous �ow supply, also when the hand-knob is held between steps

• Flow reading on front and side of the regulator• 360o turning manometer• 360o �exible �ow connection for the air mask

• Ensure a continuous stable �ow, also when gas bottles deplete

• Automatic / controlled changeover process without human interference

• Exact and precise air mixture / gas mixing station optimization – air – oxygen – heliox

GAS SUPPLY COMPONENTS FOR LABORATORY FURNITURE & FUME HOODS AND FOR AIR CONTROL

Sta� safety and laboratory e�ciency are critical points your gas supply components must ful�ll. The GCE druvaPUR point of use regulator and valve range are designed to meet the highest quality and standards.

1) Gas panel SMD, 2) Gas manifold BMD, 3) Point/of/use regulator EMD, 4) Point-of-use shut- o�, 5) Room shut-o�, 6) Floor shut-o� 7) Central shut-o�, 8) Gas management,9) Line regulator

• E�cient and safe control over gas cylinders and equipment

• Control and maintain pre-set gas purity• Constant/continuous gas �ow• Wide range of inlet and outlet pressure settings• Fast and accurate response to pressure/volume

changes – manual/semi-automatic• Controllable via your two-way communication

system• Automatic / controlled changeover process without

human interference• Compact and light design for portable use

CENTRAL GAS SUPPLY

6)

6)

2)

2) 2)

3) 8) 7)

3)

3)

3)

3) 3) 3)

3)

3) 3)

3)

3)

3)

3)

3) 3)

3)

3)

3)

4)

4)

4)

3)

3)

3)

1) 1) 1)

5)

5) 5) 5) 9)

9)

5)

5) 5)

5) 5)

5) 5)

Test Facilities LABORATORIES PILOT PLANTS AIR QUALITY MEASUREMENT Combustion Control Analyzers HVAC REFRIGERATORS HEAT EXCHANGERS

CHILLERS NGL Stabilizers

The range is also fully �exible to meet your design needs. That is why druva is a synonym for quality, user-friendliness, and customer service.

EQUIPMENT CALIBRATION, TESTING & PILOT SETUPS ARE THE 3 MAIN WAYS TO DETERMINE THE RIGHT QUALITY IS IN USE

Proper handling of expensive / toxic / �ammable high purity gases requires the highest quality of control equipment. GCE druva supplies a wide range of components and systems to handle and control specialty reference carrier or sample gases.

On the basis of many years of experience, GCE druva is specialized in �rst and second stage pressure gas supply, tubing and tube layout, cylinder stock rooms, and monitoring devices.

Test Facilities LABORATORIES PILOT PLANTS AIR QUALITY MEASUREMENT Combustion Control Analyzers HVAC REFRIGERATORS HEAT EXCHANGERS

CHILLERS NGL Stabilizers

Using he right quality of instumentation for these applications is therefore crucial!

GCE DESIGNS PRODUCES AND SELLS GAS CUTTING & WELDING TOOLS, LIKE TORCHES, MASK, REGULATORS, CYLINDERS, AND FLAME ARRESTORS

On each platform, almost every day, there is something that needs cutting or welding. Gas cutting & welding may be one of the most used tools in general construction, ship building, ship maintenance, platform work, and system building… besides a wrench.

• E�cient and safe control over gas bottles and equipment

• Control and maintain pre-set gas purity• Constant/continuous gas �ow• Avoid �ashbacks /back�re with a non-return valve• Pressure sensitive cuto� valve to avoid back�re in

fuel gas bottles• Automatic / controlled changeover process without

human interference• Compact and light design for portable use• EN 730 & ISO 5175 compatibility

NITROGEN, AS IT IS AN INERT GAS, IS ONE OF THE MOST USED GASES IN O&G. IT IS ALSO AN EASY-TO-CONTROL GAS WITH THE RIGHT REGULATOR INSTRUMENTATION IN PLACE

Nitrogen has a wide usability, like for/ as:

• Gas cap & immiscible oil displacement;• Enhance Oil Recovery (EOR);• Inerting of lines & systems;• Recovery of Natural Gas Liquids (NGLs);• Natural Gas Upgrading/ Wobbe Index modi�cations;• Pushing CO2 miscible fronts;• Fracking;

• Coil tubing;• Carrier gas;• Reference gas;• Helium enrichment;• Fire suppression; • Gas cutting & welding;• Tank blanketing.

The quality of GCE druva high-purity gas distribution system is determined by a large number of features:

• Leak-tightness;• Dead-space-minimised design;• High safety due to Hastelloy diaphragms;• Patented damping system; • Intuitive out concept for joining and safety aspects.

These points require the same attention as the �nal assembly and preventive maintenance.

Also in �re suppression the use of gas pressure regulators may be needed. GCE druva can o�er you the right choice for your application.

Art

. Nr.

7351

0000

1088

. Alte

ratio

ns a

re s

ubje

ct to

cha

nge

with

out n

otic

e. 2

8071

6kk

©G

CE

GCE world-wide: http://www.gcegroup.com

GCE Group is one of the world´s leading companies in the �eld of gas control equipment. The headquarters are in Malmö, Sweden, and the two major supply units are located in Europe and Asia.The company operates 18 subsidiaries around the world and employs more than 900 people. GCE Group includes four business areas – Cutting & Welding technologies, Valves, Healthcare and Druva. Today´s product portfolio corresponds to a large variety of applications, from single pressure regulators and blowpipes for cutting and welding to sophisticated gas supply systems for medical and electronics industry applications.

For further details, please contact regulator@gcegroup.comPhone: +49 (0)661 8393 - 0 Fax: +49 (0)661 8393 - 21

It is our belief that when we:

• Focus on delivering best of class products & accessories;• Focus on being there for our customers when you need technical or other support;• Support you in local language when needed;• Educate you on end-customer requirements and gas supply systems;• Continue to improve ourselves to follow the continuously changing needs…

we can be a good partner for you!