Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
GD129NI SINGLE POINTINFRA-RED GAS DETECTOR
FEATURES• Pre-calibrated
• No separate programmer needed
• On board confidence checking
• 4-20mA output
• Flammable Hydrocarbon and CO2 versions
• Hazardous area operation
• Control box features can be separated from the sensor as an option
• Gas concentration continuously monitored
• State of the art SMT Components
• No heaters/mirrors or optics to get dirty
• Low power usage
• Wide range of temperature operation
Gas Monitoring Solutions
The GD129NI operates on tried & tested infra-red adsorption principle. A unique sensor protection system permits operation in the harshest conditions offshore and in dusty, humid environments. Remote sensor capability eliminates the need for using expensive open path systems in inaccessible locations, ducts and heated enclosures. The sensor is immune to poisoning and high gas concentrations and is available for CO2 and Hydrocarbons. Designed to offshore construction and with a protection rating IP55, the GD129NI is a versatile and robust instrument incorporating proven technology.
The GD129NI is used to detect the presence of Flammable Hydrocarbons or Carbon Dioxide gases (Methane, Ethane, Propane, Butane and similar gases). The 4-20 mA output of the sensor would normally be connected to a TQ control panel or similar third party control system capable of providing indication and alarm generation.
The GD129NI is used for diffusion sensing applications, where the sensor is positioned at the point of monitoring and the gas diffuses through the sensor’s optical path. These sensors are not affected by being gassed over range and can be used in inert atmospheres as the sensor does not rely on oxygen being present to operate correctly.
The GD 129Ni is a low maintenance sensor but has full auto zero and span functions allowing there calibration in the field. Can be calibrated in situ, even in the hazardous area as the junction box, enclosure does not have to be opened to perform the calibration.
Options are available for duct and through bulkhead mounting, providing a very versatile sensor.
TQ Environmental Limited, operate a policy of continual product development which means the specification is subject to change without prior notice.
TQ Environmental LimitedFlanshaw Way Wakefield West Yorkshire WF2 9LPTel: +44 (0)1924 380700 Fax: +44 (0)1924 361700
SPECIFICATION
Construction
Sensor Housing 316 Stainless Steel with hydrophobic protection barrier Protection guard - Stainless Steel Junction box - Cu free aluminium with polyester paint finish
Ingress Protection IP55Conduit Entry M20Weight ca 2.1KgOverall Dimensions 130mm W x 230mm H x 120mm DTemperature Range -30o to +60oCHumidity Range 0 to 99% R.H (non condensing)
Shock & Vibration Shock: Half Sine 15g, 20ms duration on all axis Vibration: 3 - 10 Hz, Displacement 0.5mm
Resistance 10 - 50 Hz, 2m/s2Outputs 4-20mA source into 600 ohms (max)
Power Operating voltage 24VDC (11-30VDC) Operating Current 75mA @ 24VDC, 2.1 watts
Accuracy +/- 2% fsd on all ranges (linearised)Repeatability +/- 1% fsd
Gases and RangesHC version: 0-100% LEL std 0-100% volume optional Methane, propane, butane, hexane, ethylene, pentane, ethane, toluene monitored as standardCO2 version: 10,000 & 50,000ppm (0-2%v/v, 0-5%v/v)
Response Time <10 seconds to T50, <20seconds to T90 on CH4 & CO2
Built-in Self Test Continuous
Non-Intrusive Adjustments Calibrated for up to 2 years, with full auto zero and calibration facility.
Life expectancy >5 yearsWarranty 12 Months
Certification Exd IIC T6 (Ta = -20 oC to +55oC)SIRA 01 ATEX IIII
Cert No. LRQ 0958602
D3-GD129-0315
215 Approx
45
81.5
115
81.5
PARTS LIST340-002 GD129N IR Sensor CH4 0-100% LEL 340-020 GD129N IR Sensor CH4 0-100% LEL c/w Flow through adaptor
340-024 GD129N IR Sensor CH4 0-100% LEL c/w Duct mounting assembly
340-025 GD129N IR Sensor CH4 0-100% LEL c/w Bulkhead mounting 340-027 GD129N Volume CH4 0-100% Vol 340-011 GD129N IR Sensor Carbon Dioxide 0-5% Vol
Please consult TQ Environmental for other options, ranges available.
Xn-ppp-mmyyCert No. LRQ 0958602
TQ Environmental LimitedFlanshaw Way Wakefield West Yorkshire WF2 9LPTel: +44 (0)1924 380700 Fax: +44 (0)1924 361700