Quick User Guide

Gaming Case

Table of Contents

Thank you for purchasing a Rosewill Computer CasePlease read the instruction manual before using and retain it for your future reference.

1

• Product Overview

Disassembly ...................................................... 02

Accessory Box ................................................... 03

• Installation Guide

1. Open the Unit ................................................ 04

2. Install the Power Supply ................................ 05

3. Install Motherboard ........................................ 06

4. Install Add-on Card ........................................ 07

5. Install 3.5”/2.5” HDD/SDD ............................. 08

6. Care ............................................................... 09

7. Options .......................................................... 10

• Specifications Table ........................................... 12

Front I/O Cable Pinout ....................................... 13

Front I/O ............................................................. 13

2

Quick User GuidePRISM S500Gaming Case

Product Overview

Disassembly (components vary by country)

Cooling Fan

HDD Cage

SSDPlates

Side Panel

Cooling FanDust Filter

Front View Right Side View Rear View Left Side View

210 mm

477

mm

475 mm

SSD/HDDPlateGlass Panel

3

Quick User GuidePRISM S500Gaming Case

Accessory Box

Image Part Name Qty Function/Component

Screw-A (6-32 x 6mm) 5 PSU

Screw-B (6-32 x 5mm) 22Motherboard

3.5” HDD

Screw-C (M3 x 5mm) 20 2.5” SSD

Standoff 9Motherboard(Pre-Installed)

Nut Setter 1Standoff Installation

(Optional: Standoffs are Pre-Installed)

Cable Tie 10 Cable Management

Velcro Strap 4 Cable Management

Micro Fiber Towel 1 Tempered Glass Cleaning

4

Quick User GuidePRISM S500Gaming Case

Installation Guide1. Open the Unit1-1. Loosen the thumbscrews and take off panel R and L (Figure 1).

1

• Simply loosen screws to remove side panel

5

Quick User GuidePRISM S500Gaming Case

2

2. Install the Power Supply2-1. Set the power supply unit (PSU) at the top of the case and secure with Screw-A (Figure 2).

6

Quick User GuidePRISM S500Gaming Case

3. Install Motherboard3-1. Secure the motherboard down onto the pre-installed standoff with Screw-B (Figure 3).

3

7

Quick User GuidePRISM S500Gaming Case

4. Install Add-on Card4-1. Loosen the screws to open the cover panel/slot cover (Figure 4a).

4-2. Install the add-on card and secure with screws (Figure 4b).

4a

4b

8

Quick User GuidePRISM S500Gaming Case

5a

5d

5f 5g 5h

5e

5c

5-2. Secure the 3.5" drive onto the tray/plate with Screw-B (Figure 5d/5e).

5-3. Secure the 2.5” drive onto the tray with Screw-C (Figure 5f/5g/5h).

* If drive is installed on 5e or 5g, water cooling radiator cannot be added.

5-4. Put the tray/plate back onto the chassis and secure with screws.

5. Install 3.5”/2.5” HDD/SDD 5-1. Take out the 3.5”/2.5” HDD/SDD trays/plates from the chassis (Figure 5a/5b/5c).

5b

9

Quick User GuidePRISM S500Gaming Case

6a

6-2. Clean the dust filters on the bottom regularly to ensure adequate airflow (Figure 6b).

6. CareTo prevent damage, keep all panels closed and secured.

6-1. Put the side panels back in place and secure with thumbscrews (Figure 6a).

6b

10

Quick User GuidePRISM S500Gaming Case

7. Options7-1. LED Light Mode Press LED light button briefly: RGB 1 (steady-rainbow) > RGB 2 (flowing-rainbow) > RGB 3 > RGB 4 > RGB 5 (seven-

color-breath) > RGB 6 (seven-color-one-way-billboard) > (seven-color-two-way-billboard) > Red > Green > Blue > White > Yellow > Cyan > Pink

Press LED light button and hold for >1.5 seconds: LED light turns off.

7-2. Liquid Cooling Radiator Installation Installing water cooling radiator on the side: a. Unscrew to remove the drives plate (Figure 7a).

b. Secure the radiator with screws (Figure 7b).

7a

7b

11

Quick User GuidePRISM S500Gaming Case

d. Secure the radiator with screws and put the dust filter back (Figure 7d).

Installing water cooling radiator on the bottom: c. Remove the bottom dust filter (Figure 7c).

7c

7d

12

Quick User GuidePRISM S500Gaming Case

Specifications Table

Model

Model Name PRISM S500

Specifications

Type ATX Mid Tower

Color Black

Case Material Steel / Tempered Glass

With Power Supply No

Power Supply Mounted Top

Motherboard Compatibility E-ATX, ATX, Micro ATX

With Side Panel Window Yes / Tempered Glass Side Panel

Expansion

External 5.25" Drive Bays 0

Internal 3.5" Drive Bays 3 (0)

Internal 2.5" Drive Bays 2 (5)

Expansion Slots 7

Front Ports

Front Ports2 x USB 3.0HD Audio In/OutLED Light Control

Cooling System

120 mm Fans3 x Bottom RGB LED (Pre-Installed)2 x Side (Optional)1 x Rear RGB LED (Pre-Installed)

Physical Specifications

Dimensions 8.27” x 18.7” x 18.5” (W x H x D)

Weight 17.6 lbs

13

Quick User GuidePRISM S500Gaming Case

Front I/O Cable Pinout

Front I/O

USB 3.0 CONNECTOR HD Audio CONNECTOR

Mic.

HD Audio

USB 3.0

LED Switch

Power

Features

• Tempered Glass Side Panel• Pre-Installed 4 x 120mm RGB LED Fans• I/O Ports: 2 x USB 3.0, HD Audio In/Out, LED Light Control• Supports up to 2 x 120mm Fans / 240mm Water-Cooling Radiator on the side, 3 x 120mm Fans

/ 360mm Water-Cooler on the bottom, 1 x 120mm Fan at the rear• Supports up to 160mm tall CPU Cooler• Supports up to 440mm Graphics Card• Easy-Access Bottom Dust FilterNOTICE: Please make sure your motherboard is equipped with on-board USB 3.0 socket before purchasing

PRISM S500_A

Technical Support Informationtechsupport@rosewill.com 1-800-575-9885

----------------------------------------------------------------------------------Thank you for purchasing a quality Rosewill product.

Please register your product at www.rosewill.comfor complete warranty information and support for your product.