4
Goltens Oslo AS G1700 MP Strømsveien 195-197, 0668 Oslo, Norway Tel: +47 22 88 39 30 Fax: +47 22 88 39 31 E-mail: [email protected] Web: www.goltens.no <http://www.goltens.no> Technical Information Weight: 14 Kg Dimension: 420 x 280 x 220 Max oil pressure rating (2 minutes): 1700 bar Max continuous working (pressure/automatic): 1050 bar Max air drive pressure: 8,62 bar / 125 PSI Working ratio air: oil 1:220 Output flow against 0 bar (kp/cm2): 0,5 litre/min. GOLTENS MULTIPURPOSE HIGH PRESSURE PUMP

g1700 mp_brosjyre lr v2

Embed Size (px)

DESCRIPTION

goltens MultiPurPose high Pressure PuMP Oslo AS Technical Information Weight: 14 Kg Dimension: 420 x 280 x 220 Max oil pressure rating (2 minutes): 1700 bar Max continuous working (pressure/automatic): 1050 bar Max air drive pressure: 8,62 bar / 125 PSI Working ratio air: oil 1:220 Output flow against 0 bar (kp/cm2): 0,5 litre/min. Strømsveien 195-197, 0668 Oslo, Norway Tel: +47 22 88 39 30 • Fax: +47 22 88 39 31 E-mail: [email protected] Web: www.goltens.no

Citation preview

Page 1: g1700 mp_brosjyre lr v2

Goltens Oslo AS

G1700 MP

Strømsveien 195-197, 0668 Oslo, Norway

Tel: +47 22 88 39 30 • Fax: +47 22 88 39 31

E-mail: [email protected]

Web: www.goltens.no <http://www.goltens.no>

Technical Information Weight: 14 Kg Dimension: 420 x 280 x 220 Max oil pressure rating (2 minutes): 1700 bar Max continuous working (pressure/automatic): 1050 bar Max air drive pressure: 8,62 bar / 125 PSI Working ratio air: oil 1:220 Output flow against 0 bar (kp/cm2): 0,5 litre/min.

goltens MultiPurPose high Pressure PuMP

Page 2: g1700 mp_brosjyre lr v2

G1700 MP er drevet av trykkluft men kan også betjenes for hånd.En av markedets mest anerkjente høytrykkspumpe er utviklet for å dekke et langt større spekter av oppgaver enn tidligere.G1700 MP er som tidligere versjoner konstruert for å betjene paralelle eller serielle trykkkretser .Gjennom et enkelt håndgrep endrer G1700 MP karakter fra å være paralellkoblet, til å bli seriekoblet hvor arbeidstrykket detekteres etter kretsen. Dette medfører at når en benytter serielle jekker, har en samtidig sikerhetskontroll over at alle jekker faktisk leverer trykk samtidig.Vekslingen gjør at G1700 MP enkelt kan betjene alle typer jekker hvor høyt trykk er fremste krav.Etter bolt tiltrekking med pumpen i serie mellom feks 6 jekker samtidig, kan en enkelt ta pumpen til neste oppgave gjennom å vende den til paralell modus med et enkelt håndgrep.G1700 MP er velegnet til pressing, avtrekking, boltstrekking og annet verktøy hvor høyt trykk er av vital betydning.

G1700 MP is air pressure driven, but can be operated also manually. One of the most recognized high-pressure pumps ever is designed to cover a far wider range of tasks than previously. G1700 MP is like earlier models designed to operate parallel or serial circuits.

Through a single operated lever, G1700 MP changes character from a parallel mode to be serial connected, where the working pressure is detected after the circuit. This means that by using a number of tools, the gauge displays that all the tools in the circuit actually delivers pressure at the same time. G1700 MP can serve almost all types of tools where high pressure is the foremost requirement.

After bolt tightening with the pump in serial mode with for instance 6 hydraulic nuts, it is easily done by turning the lever, to change the pump for a new task in parallel circuit mode. G1700 MP are suitable for bolt tensioning, jacking, pulling, and other missions with tools where high pressure is of vital importance.

G1700 MP

Strømsveien 195-197, 0668 Oslo, Norway

Tel: +47 22 88 39 30 • Fax: +47 22 88 39 31

E-mail: [email protected]

Web: www.goltens.no <http://www.goltens.no>

Page 3: g1700 mp_brosjyre lr v2

G1700 MP

Serie krets / Serial Circuit

Parallell krets / Parallel Circuit

Page 4: g1700 mp_brosjyre lr v2

Menu The services listed below are all carried out by in house equipment and expertise. Our manage-

ment is capable and experienced in tying these services together in small and large projects to

suit the owners needs. For other services not listed, we co-operate with specialized companies

so the owner can select to have one main contractor to tie the project together.

3007

22. 0

6 .0

9. H

A G

rafis

k a.

s /

PR

INFO

Kol

botn

. 100

.

specialized services

reconditioning services

trading/supply

repair services (including voyage repairs)

• Crankshaft Grinding • in Situ • in Workshop• Line Boring of Engine Bed Plates in Situ or in Workshop

• Centrifugal Casting of White Metal Bearings• Fuel Injectors and Pumps• Connecting Rods• Exhaust Valves / Seats

• MKK and Alfa Laval Separator Spares• Bearings• Diesel engine parts• Piston Rings

• Diesel Engines• Steam Turbines• Shaft Lines• Propellers & Rudders• Winches• Valves, Pumps, COW Machines• Hatch covers• Ro/Ro Equipment

• Landing Surfaces in Situ• Alignment and Chocking• Laser based alignment• Broken Stud Removal

• Cylinder Heads• Pistons• Turbochargers• Governors

• Hydraulic Pumps• Fuel equipment• Miscellaneous parts• Spare parts for Aker cranes

• Automation Systems• Electrical Systems• Hydraulic Systems• Steel Structures• Pipelines• Blasting & Painting• Cleaning• Staging• Service on Aker cranes (and others)

Goltens Greece

Goltens India (Chennai)

(Mumbai)

Goltens UK