1 / 4

FV_FIAT_2016 Installation Manual_v20160203

Product type

FV FIAT 2016 [without navigation inside]

This interface can insert high definition CVBS video ,DVR and reverse camera video onto the U Connect Fiat

screens,[with 5 inch screen] it has plug and play installation, the installer does not need to cut any wire. Just replace the

OEM top metal cover with Fosp’s top metal cover with PCB on it, then CVBS/RGBs can be inserted. It is also compatible

with a Chrysler 5 inch LCD head unit.

Chrysler 2015

FIAT 2015

Features

Very easy to install and very nice compatibility: just replace one metal frame inside the Head unit, take a ribbon

out and re inserted through this PCB, then the installation is done.

The CAN box is used to generate reverse signal, so camera installation is easy and just plug and play. And it can

power the camera.

Can connect with the navigation of FOSP and show navigation on the OEM screen. Also can connect with the

android navi module of FOSP, which makes all popular on line navigation like WAZE/Google map works very nice,

and also has mirror function of Android and iPhones and has MP5 player inside.

A high resolution scaler is used inside. The high resolution navigation can be shown on the screen, the OEM

touch can be used to control the navi.

2 / 4

System connection

Camera solution

External keypad. This is one extra method of

switching, in case the CAN code get changed.

Connect behind CD,

for CAN code of

reverse and power

supply.

Take out the top metal cover on the head

unit. and replace it with the right side

frame piece

Make the video ribbon go through the PCB:

PCB_IN of the PCB’s below side: The inserted ribbon connected to the PCB of LCD.

LCD_OUT of the PCB’s top side: The OEM ribbon go to PCB’s top side as marked in pic.

There is another connector near the shielding case. This one is used for Chrysler 5

inch.

Then the pic can be inserted into the LCD.

These green wires are reverse voltage output and

input.

It can give power to camera also.

The installer can also force manual camera

display by splitting the connection and

giving a 12V to the Reverse IN wire.

External RGB input.

FOSP’s HD navigation can be

connected here.

3 / 4

Navigation solution

If user want to add navigation, the touch need to be transform.

Installation on the Chrysler 5inch

The daughter board can be also used for Chrysler 5inch. Need to take away the metal frame[as shown in

right pic]. After connecting the ribbon, fix the PCB board inside the head unit. The screw locations are designed for

that.

The touch ribbon of PCB used when need to add the navigation

Connect CAR_IN to the LCD driving pcb.

The oem touch ribbon go to PNL_OUT of the daughter board .

then “NAVI TOUCH” connector can offer the touch signal to the external navigation.

The From_PCB connector: connect to the OEM PCB.[there are 2 from_PCB socket, on

both sides of this PCB.] they have the same connection inside, just the top one is for

Chrysler, the below one is for Fiat.

The LCD_OUT connector connect the OEM ribbon

Fix the daughter in the head unit with the OEM screws.

Open

the

LCD

4 / 4

8 DIP setting on interface box

DIP Down side = ON Up side =OFF

1 RGB input enabled RGB input disabled

2,3 AV1/2 input enabled AV1/2 input disabled

4 The navigation of FOSP

5 CAMERA in CVBS is displayed when in reverse.

[this is for the case aftermarket camera is installed]

Car oem picture is displayed when in reverse.

6 Display front camera 5s after reverse Go back directly after reverse.

7 8 These 2 DIPs are not used. Stay up.

The 4-Pin DIP for CAN

These 4 dips should stay up when install FIAT 2015

3 Users operation

1 Switch

Voice on steering wheel: when pressed long, the interface will switch among the inputs.

The user can also use the keypad to switch.

2 Reverse

When the driver goes to R, the green wire of “Reverse out” from can box will become 12V.

This wire can power on a camera, also it will force the interface into reverse picture display.

When DIP5=OFF[UP state], the interface assumes that the car has OEM camera, and the OEM picture will be displayed.

When DIP5=ON[Down state], the interface assumes that the car has NO OEM camera, and the inserted “Camera IN” CVBS video will be

displayed.

(3)

When DIP6=ON[Down state],the interface will show 5s front camera[AV1] after reverse. The ACC OUT is for front camera powering at this case.

When DIP6=DOWN[Up state],the interface no action after reverse.

(4)

In Case there is a new car type and the Can is not working, the installer can power up this unit manually, he needs to do this way:

Cut the CAN+/ off from the harness.

The 2nd

pin from Left [marked IR IN] connected to ACC to power up this unit.[BATT/GND connected the same way]

The Green wire of Reverse IN goes to 12V will force this unit display the reverse video.

No. name parameter

1 Av1, , cam video 0.7Vpp with 75 ohm impedance

NTSC/PAL/SECAM automatic switch

2 Reverse Control wire >5V will force into camera mode.

3 Normal Power consumption 4.8W

4 Standby current < 10uA

5 Reverse trigger threshold >5V trigger

6 Work temperature 40 ~ +85C

7 Size 11.8cm * 8.3cm * 2.2cm