2
www.santec-video.com TRANSMISSION Ethernet (twisted pair) system technology for analogue CCTV cameras Future-oriented installation of analogue CCTV cameras using Ethernet cables instead of coaxial cables. SANTEC Ethernet (twisted pair) system technology enables you to create a modern and future-oriented video surveillance system using CCTV cameras with Ethernet cables (e.g. CAT5 cables) instead of coaxial cables. This technology ensures a forward-looking installation because - if converted to IP cameras at a later stage - the existing Ethernet cable can be used and thus costs can be saved. Many of the analogue SANTEC CCTV cameras are equipped with a RJ-45 connection for an Ethernet cable (CAT5 cable). Using plug & play, a camera can easily be linked directly to the network cable. The camera transmits the picture via the Ethernet cable. The SANTEC devices VEZ-4SYS (4-channels) or VEZ-16SYS (16-channels) receive the pictures and forward them to the digital recorder. In addition, the receivers power the cameras, similar to a PoE system for IP technology. Telemetry data (RS-485) to control speed domes* or to configure cameras can be transmitted, too. Advantages: Future-proof Ethernet (CAT5) cabling instead of coax No new cabling required for later use of network technology Easy, fast and cost-saving installation (plug & play) Video, power and data is transmitted via an Ethernet cable No additional power supply for cameras required Up to 200 m cable length for power supply Remote configuration of cameras using digital recorders or keyboards * Speed domes need to have their own power supply. CCTV camera Video Power RS-485 CAT5 cable Receiver

Future-oriented installation of analogue CCTV cameras ... Ether… · Day/night IR dome camera UTP transmitter (RJ-45) 600 TVL 2,8-12mm focal length WDR, IP-66, IR LEDs VTC-HDH359IRPU/G

  • Upload
    others

  • View
    1

  • Download
    0

Embed Size (px)

Citation preview

Page 1: Future-oriented installation of analogue CCTV cameras ... Ether… · Day/night IR dome camera UTP transmitter (RJ-45) 600 TVL 2,8-12mm focal length WDR, IP-66, IR LEDs VTC-HDH359IRPU/G

www.santec-video.com

TRANSMISSION

Ethernet (twisted pair) system technology for analogue CCTV cameras

Future-oriented installation of analogue CCTV camerasusing Ethernet cables instead of coaxial cables.

SANTEC Ethernet (twisted pair) system technology enables you to create amodern and future-oriented video surveillance system using CCTV cameras withEthernet cables (e.g. CAT5 cables) instead of coaxial cables. This technologyensures a forward-looking installation because - if converted to IP cameras at alater stage - the existing Ethernet cable can be used and thus costs can be saved.

Many of the analogue SANTEC CCTV cameras are equipped with a RJ-45 connectionfor an Ethernet cable (CAT5 cable). Using plug & play, a camera can easily be linkeddirectly to the network cable. The camera transmits the picture via the Ethernet cable.The SANTEC devices VEZ-4SYS (4-channels) or VEZ-16SYS (16-channels) receivethe pictures and forward them to the digital recorder. In addition, the receivers powerthe cameras, similar to a PoE system for IP technology. Telemetry data (RS-485) tocontrol speed domes* or to configure cameras can be transmitted, too.

Advantages:Future-proof Ethernet (CAT5) cabling instead of coaxNo new cabling required for later use of network technologyEasy, fast and cost-saving installation (plug & play)Video, power and data is transmitted via an Ethernet cableNo additional power supply for cameras requiredUp to 200 m cable length for power supplyRemote configuration of cameras using digital recorders or keyboards

* Speed domes need to have their own power supply.

CCTV camera

VideoPowerRS-485

CAT5 cable

Receiver

Page 2: Future-oriented installation of analogue CCTV cameras ... Ether… · Day/night IR dome camera UTP transmitter (RJ-45) 600 TVL 2,8-12mm focal length WDR, IP-66, IR LEDs VTC-HDH359IRPU/G

VEZ-16SYS 16-channel twisted pair receiver 16x UTP (RJ-45)

16x BNC 1 Vpp Up to 200 m cable length Video, power, data Matching power supply unit:

VCA-24V8A-SYS

TRANSMISSION

Our products are subject to continuous development. Please refer to our current product catalogue for up-to-date product offering. Illustrations may vary. Subject to technical changes. Errrors excepted.

Distributed by: Sanyo Video Vertrieb AG � An der Strusbek 31 � D-22926 Ahrensburg � [email protected] � www.santec-video.com

VEZ-4SYS 4-channel twisted pair receiver 4x UTP (RJ-45)

4x BNC 1 Vpp Up to 200 m cable length Video, power, data Matching power supply unit:

VCA-200

VTC-280IRPWDUDay/night compact cameraUTP transmitter (RJ-45)650 TVL2.8-12 mm focal lengthWDR, IP-66, IR LEDs

VTC-8322WDPUDay/night box cameraUTP transmitter (RJ-45)650 TVLC/CS lens mountWDR

VTC-274PWDUColour dome cameraUTP transmitter (RJ-45)650 TVL2.8-12 mm focal lengthWDR, IP-44

VTC-HDH444IRPWDUDay/night IR dome cameraUTP transmitter (RJ-45)650 TVL2.8-12 mm focal lengthWDR, IP-66, IR LEDs

Ethernet (twisted pair) system technology:

How to install the system components (example):

The SANTEC cameras shown below are compatible with the Ethernet (twisted pair) system technology and can be connected via an Ethernetcable (CAT5). Simultaneous transmission of video data, power and telemetry is possible (plug compatible with RJ-45).

Suitable cameras:

VTC-HDH359IRPU/WDay/night IR dome cameraUTP transmitter (RJ-45)600 TVL2,8-12mm focal lengthWDR, IP-66, IR LEDs

VTC-HDH359IRPU/GDay/night IR dome cameraUTP transmitter (RJ-45)600 TVL2,8-12mm focal lengthWDR, IP-66, IR LED

2012

-04-

23

Keyboarde.g. KSC-3505

BNC cable(video)

RS-485(telemetry)

Digital recordere.g. SANTEC SanStore

Monitor

Twisted pair receiver

RS-485(Telemetry)

Netzteil

CAT5 cableBNC cableRS-485 cablePower supplyVGA, HDMI or BNC cable

CAT5 cable forvideo, power, RS-485 (telemetry)

1. VTC-280IRPWDU2. VTC-8322WDPU3. VTC-HDH359IRPU/W4. VTC-HDH359IRPU/G5. VTC-HDH444IRPWDU6. VTC-274PWDU7. VCA-24V8A-SYS or VCA-2008. VEZ-16SYS or VEZ-4SYS

1 2 3 4 5 6

8

7