Fully Integrated 30” Bottom MountFully Integrated 30” Bottom Mount KF 1813 Vi / KF 1803 Vi Please note the following: • This specification sheet is for a single built-in unit

Fully Integrated 30” Bottom Mount

KF 1813 Vi / KF 1803 Vi

8mieleusa.comSpecification Sheets TRS 01092018

SPECIFICATIONS

KF 1803 Vi — Item 38180301USA - Right Hinged

KF 1813 Vi — Item 38181301USA - Left Hinged

Overall Unit Width 293/4” (756 mm)

Overall Unit Height 84” (2134 mm)

Overall Unit Depth 24” (610 mm)

Niche

Minimum Cabinet Opening Width 30” (762 mm)

Minimum Cabinet Opening Height 84” (2134 mm)

Minimum Cabinet Opening Depth 25” (635 mm)*

Interior Volume

Fresh Food Volume 10.8 cu-ft (305.8 L)

Freezer Volume 4.39 cu-ft (124.3 L)

Plumbing

Water Supply Requirements

Connect to a cold water supply only. Do not connect to a low-mineral or a reverse osmosis system. Must be connected to a shut-off valve. The water shut-off valve must be accessible after installation. The water pressure must be between 25 psi (1.7 bar) and may not exceed 80 psi (5.5 bar). If the pressure is higher than 80 psi (5.5 bar), a pressure reducing valve must be installed.

Water Connection Line

Standard 1/4” O.D flexible water line. The maximum outer diameter of the water pipe (without fittings): 3/8” (10 mm). Water line is not included.

Electrical

Electrical Requirements - Volts/Amps

110V / 120V, 60Hz, 15 Amps In the case of side-by-side installations,a separate outlet must be used for eachappliance.

Power Cord - Plug and length NEMA 5-15 plug, 5 ft (1.52 m)

Custom PanelPlease refer to the manual for further details.

Maximum Panel Weight Upper door - 104 lbs (47 kg)Lower door - 22 lbs (10 kg)

Maximum Panel Thickness 11/2” (38 mm)

Minimum Panel Thickness 3/4” (19 mm)

Shipping

Shipping Weight 503 lbs (228 kg)

Shipping Dimensions 331/2” W x 8913/16” H x 291/4” D

Support

Call Miele (800) 999-1360

Miele Website 8www.mieleusa.com

20/20 Link 82020technologies.com

KF 1813 Vi / KF 1803 ViPage 2 of 8

KF 1813 Vi / KF 1803 ViFeatures:• MasterCool controls • ClearView lighting system• Drop and Lock Shelves• SmartFresh storage drawers• FullView storage drawers• Ice maker• RemoteVision capable• Acoustic door and temperature alarm • Optical door and temperature alarm• Energy Star

Fully Integrated 30” Bottom Mount KF 1813 Vi / KF 1803 Vi

Please note the following:• This specification sheet is for a single built-in unit.• When combining multiple MasterCool units side-by-side, please refer to the Merging Kit specification sheet. *If design calls for a partition less than 6 5/16” (160 mm) the left unit’s cutout will require an additional 1/8” (3 mm) to the width to allow installation of the Heating Mat/Merge Kit.

FOR FLUSH INSTALLATION


* Niche depth assumes a 3/4” (19 mm) panel, please adjust according to custom panel thickness



POWER SUPPLY AND WATER CONNECTIONBACK VIEW

Water connection is located in front of unit.1/4” compression fitting is needed.

Electrical - 5 foot (1.52 m) - 120 Volt - 15 Amp - NEMA 5-15 molded plugWater line - 1/4” flexible water line - not included

DOOR PANELS DIMENSIONSKFP 3013 - Top PanelKFP 3023 - Bottom Panel(Available as an accessory)

26 7

/16”

(672

mm

)53

5/1

6”(1

354

mm

)

29 3/4”(756 mm)

1/8”- 3/16”(3 - 5 mm)

4” (102 mm)



LOWER HINGE LOCATION

FRONT VIEW

Upper Door

29 11

/16"

29 1

/8 -

29 1

/2"

Hinge

Hinge

Lower Drawer

1/2"

- 2

3/8"29

1/8

” - 2

9 1/

2”(7

40 -

749

mm

)

29 1

1/16

”(7

54 m

m)

1/2”

- 2

3/8”

(13

- 60

mm

)U

nit f

eet a

djus

tmen

t pa

ram

eter

s

Top

of fe

et to

bot

tom

of b

otto

m h

inge

Top

of fe

et to

top

of fr

eeze

r dra

wer



CUSTOM PANEL INSTALLATIONS

Pan

el "

B"

Hei

ght

Width: 29 3/4" in all casesThickness: Minumum 3/4" outside frame

Standard Upper Panel Height: 53 5/16"

Note: Finish back side of panels to insure appearancePanel may extend above unit. This is notconsidered in height calculation

Upper Maximum panel weight : 103.6 Pounds

Lower Panel Height: Use the following calculation:

Panel Height = HOM - 53 9/16 - TKH

HOM = Total height of machine. Can be adjusted tomatch adjoining cabinets - typically 84"HOM is adjustable between 83 1/2" - 85 3/8"

TKH = Toe-kick height (2" - 8 3/8")

Lower Maximum panel weight: 22 Pounds

Upper Panel

TKH

HO

M

Pan

el H

eigh

t

These units do not come equipped with a front panel. They are designed to accept a custom door panel supplied bythe cabinet maker. Miele has a unique panel integration system which allows the panels to align with the surroundingcabinets.

Panel size is determined in the following manner:

Lower Panel

Upper Panel NotesIf the adjoining cabinets are taller than the height of machine (HOM) - the upper panel may be extended accordingly.Find the difference between height of the adjoining cabinets and the height of machine (HOM) and add to 53 5/16"

Adjoining cabinet

Machine

Extended Panel Example:Ajoining cabinet height: 87"Height of machine: 84"Difference: 3"

Extended panel height: 56 5/16"

104

HOM - 53 9/16” (1360.5 mm) - TKH

53 5/16” (1354 mm)

29 3/4” (756 mm) in all casesMinimum 3/4” (19 mm) outside frame

87” (2210 mm)84” (2133 mm)3” (76 mm)

56 5/16” (1430 mm)

Total height of machine. Can be adjusted to match adjoining cabinets - typically 84” (2133 mm).HOM is adjustable between 83 1/2” -85 3/8” (2121 mm - 2165 mm)

Lower Maximum panel weight: 22 Pounds

Toe-kick height 2” - 8 3/8” (51 - 212 mm)TKH =


HINGING DETAILS

0-1/8"

Front Panel

1"1-1/4"

1-1/2"

0-3/4"

0-3/4"

1-1/4"1-1/2"1-3/4"2" 1"

Cabinet Front

0-3/4"

1"1-1/4"1-1/2"

0-1/8"

FrontPanel

0-3/4"

1-1/4"1-1/2"1-3/4" 1"

Cabinet Front

rooD °511rooD °09

snoitpo ssenkcihTsnoitpo ssenkcihT

Door Swing

NOTE: Additional space needed depending onthickness of front panels and handle used

38 1

1/16

"

7/16"

Door Swing

16 7/8"MAX


32 11

/16” (

830

mm

)

0-3/4” (19 mm

)1” (25 m

m)

1-1/4” (32 mm

)1-1/2” (38 m

m)

1-3/4” (44 mm

)2” (51 m

m)

0-3/4” (19 mm

)1” (25 m

m)

1-1/4” (32 mm

)1-1/2” (38 m

m)

1-3/4” (44 mm

)

0-3/4” (19 mm)1” (25 mm)1-1/4” (32 mm)

1-1/2” (38 mm)0-3/4” (19 mm)

1” (25 mm)

1-1/4” (32 mm)

1-1/2” (38 mm)

11 3/4”(298 mm)

Max7/16” (11 mm)

0-1/8” (3 mm)0-1/8” (3 mm) 0-1/8” (3 mm)




HINGING DETAILS115o OPENING

0-1/8"

Front Panel

1"1-1/4"

1-1/2"

0-3/4"

0-3/4"

1-1/4"1-1/2"1-3/4"2" 1"

Cabinet Front

0-3/4"

1"1-1/4"1-1/2"

0-1/8"

FrontPanel

0-3/4"

1-1/4"1-1/2"1-3/4" 1"

Cabinet Front

rooD °511rooD °09


Door Swing


38 11

/16"

7/16"

Door Swing

16 7/8"MAX


3”(76.2mm)

1-3/4”(44.5mm)

1-3/8”(35mm

)1-1/6” (29.6m

m)

1/4”(6.4mm

)17/24” (18m

m)

2-1/24”(52mm)2-1/3” (59mm)2-5/8” (67mm)

3”(76.2mm)

1-3/4”(44.5mm)

1-3/8”(35mm

)1-1/6” (29.6m

m)

1/4”(6.4mm

)17/24” (18m

m)

2-1/24”(52mm)2-1/3” (59mm)2-5/8” (67mm)

0-3/4” (19 mm

)1” (25 m

m)

1-1/4” (32 mm

)1-1/2” (38 m

m)

1-3/4” (44 mm

)

1-1/2” (38 mm)

1-1/4” (32 mm)

1” (25 mm)

0-3/4” (19 mm)

0-1/8” (3 mm)



HINGING DETAILS90o OPEING

0-1/8"

Front Panel

1"1-1/4"

1-1/2"

0-3/4"

0-3/4"

1-1/4"1-1/2"1-3/4"2" 1"

Cabinet Front

0-3/4"

1"1-1/4"1-1/2"

0-1/8"

FrontPanel

0-3/4"

1-1/4"1-1/2"1-3/4" 1"

Cabinet Front

rooD °511rooD °09


Door Swing


38 11

/16"

7/16"

Door Swing

16 7/8"MAX


7/16”(11 mm)

1-3/16”(30mm)

1-7/16”(36.5mm)

1-11/16”(43mm)

1-15/16”(49.2mm)

Handle or object that is NOT flush with Cabinet Front.

0-3/4” (19 mm

)1” (25 m

m)

1-1/4” (32 mm

)1-1/2” (38 m

m)

1-3/4” (44 mm

)2” (51 m

m)

0-3/4” (19 mm)

1” (25 mm)

1-1/4” (32 mm)

1-1/2” (38 mm)

0-1/8” (3 mm)

When installing hinge side next to an appliance or object that is within range of the door panel, limit the door opening angle to 90o. This is done by installing the banking pin as illustrated. Insert the banking pin through the holes and drive in with a hammer.

Specification Sheets TRS 01092018


Documents

Fully Integrated 30” Bottom MountFully Integrated 30” Bottom Mount KF 1813 Vi / KF 1803 Vi Please note the following: • This specification sheet is for a single built-in unit