20

Full Thrust Lite (New English Version)

Embed Size (px)

DESCRIPTION

space combat

Citation preview

  • WHAT IS FULL THRUST LIGHT?Full Thrust has been one of the most consistently popular Starship Combat wargames around, ever since the first edition was published way back in 1991.

    The rules set presented here, which we call FULL THRUST LIGHT, is a stripped-to-the-basics version that introduces the most important core rules of the game, and is ideal for getting new players into the system. FULL THRUST LIGHT uses only the simplest movement rules (for cinematic style play) and just a couple of the most common weapon systems. The complete version of FULL THRUST (currently in Second Edition with add-ons, which we refer to as FT2.5, with a Third Edition under development) introduces much, much more loads more weapon options, defensive systems and screens, fighter operations, an

    optional vector movement system, and a com-plete design-your-own-ships construction and costing system.

    So, enjoy this simple free intro to the rules, then check out our website at www.gzg.com for all the rest!

    Full Thrust and Full Thrust Light are trademarks of GZG, and all material

    herein is copyright J.M.Tuffley and GZG. Permission is hereby granted to duplicate and/or distribute this document freely for non-commercial purposes provided that a) it is copied complete and unaltered, and b) it is not offered for sale in any way.

    3

  • WHAT YOULL NEEDIt is possible to play FULL THRUST with card coun-ters representing the starships, but for the full miniatures gaming experience youll ideally want models. Our extensive FULL THRUST miniatures line can provide you with everything you need, but you can also use models from any other manufactur-ers. If you are using one of our FT INTRO PACK sets, youll have two good starter forces of 8 ships per side ranging in size from small Frigates up to a Battlecruiser each, which is an ideal set-up to get you into the game.

    All ship models should be mounted on stands, and all distances and ranges are measured to and from the CENTRE of the models stand.

    Each player in the game will need a Ship Record Sheet filled out for his fleet, for plotting move-

    ment orders and recording damage etc. Youll also need a handful of ordinary six-sided DICE, and a tape measure or long ruler marked in your chosen Measurement Units (see below).

    Finally, youll need a flat playing surface; FULL THRUST does not require a hexagon or square grid map, just a plain tabletop - though your playing area can be made much more attractive by using a black cloth or board speckled with a star-field of paint dots.

    What you need to play: Models or Markers representing ships, record sheets, some six sided dice, ruler or tape measure and a playing area.

    4

  • SHIP RECORD SHEETSThe Ship Record Sheets that youll find on the reverse of these rules are already set up for some simple generic ship designs based on the selection of miniatures in the intro Pack, so you can start to play almost immediately - just pho-tocopy one sheet per player and you are ready to go. The two sheets each have different ship designs to give you some variety, but you can use identical sheets for both fleets if you prefer. It doesnt matter what miniatures you use with these designs, and after your first game or two you should feel free to modify the designs by swapping some weapons and systems around to suit your own preferences. Permission is hereby granted for the Ship Record Sheets to be photo-copied or printed off as desired for non-commer-cial purposes.

    The Ship Record Sheet is divided into two parts: the Ship Systems Displays (SSDs), one for each ship in your fleet, and the Movement Plot which is used for writing the movement orders for each game turn. Each ship uses one line on the Movement Plot for recording its movement

    orders; the first (greyed-out) line on the plot is filled in with some example orders to illustrate how everything should be recorded.

    The individual SSDs for each ship have a number of symbols, or ICONS, that represent the various SYSTEMS (drives, weapons etc.) that the ship car-ries. The far right SSD on the sheet the greyed- out one should not be used in play; it is provided as a reference example to explain all the icons.

    IMPORTANT: Please note that the ship designs given in the SSDs here are NOT

    full FT designs to avoid confusion, they only show the systems that are relevant to the introductory rules presented here.

    SSDs represent the overall ship status using icons for the various ship systems. Hull Boxes are used as damage track. Use movement plot to record your movement orders.

    Hull Boxes are used as damage track.

    SHIP SYSTEMS DISPLAYS (SSD)

    SSDs represent the overall ship status using icons for the various ship systems.

    Drive icons show total Thrust Points available.

    5

  • DISTANCE AND MEASUREMENTAll distances in FULL THRUST are given in Measurement Units or mu; you can choose what one mu represents, to suit the size of your playing area. The standard that we normally use is 1mu = 1 inch, which works best if you have a fairly large table, but if you want more action in a smaller space then feel free to use 1mu = 1 centimetre.

    Ships never block line-of-fire from each other, and may freely move through/across other ships during the movement phase; space is, after all, three dimensional even though we choose to rep-resent it two-dimensionally here for simplicity of play. If there is a conflict of placement between actual miniatures at the end of the movement phase, due to the physical size of the models, then they should be placed as closely as possible to their intended positions. This should be with the agreement of all players, displacing smaller ships in preference to larger ones and maintain-ing courses as the highest priority. Full Thrust

    Light has no provision for collisions or deliberate ramming, but this is covered in the full FT rules!

    If a ship leaves the playing area, either deliber-ately or through player error in plotting move-ment orders, in basic terms it is out of the game and may NOT return. This rule should be consid-ered flexible, however, and returning to play MAY be allowed with the agreement of all involved provided that this is decided at the start of the game.

    Rules refer to distances in mu; 1 mu = your favourite unit (inch, cm). Distances and ranges are measured to and from the CENTRE of the models stand. Ships never block LOF and movement and there are no collisions or ramming; Ships leaving the table may not return to battle in the basic game.

    If leaves the playing area it may NOT return for duration of game.

    has LOF at through .

    could also move through the position of if desired.

    A

    BC

    6

  • COURSES AND FIRE ARCS:The direction in which a ship is moving is re-ferred to as its COURSE. In the simple cinematic movement system here, ship models must al-ways face in the direction they are moving. There are 12 possible Courses, denoted by a clock-face with a fixed orientation on the playing area (Course 12 should be defined as pointing directly towards one table edge, and all courses are then defined relative to that). Thus a ship moving directly in the 12 direction would be on Course 12, while one traveling in the opposite direction would be on Course 6. The clockface is also used to define the FIRE ARCS of a ships weapons, though the fire arcs are relative to the SHIP rather than relative to the playing area. Ships in Full Thrust Light have 6 fire arcs of 60 degrees each; working clockwise, there is the FORE (F) arc from 11 oclock to 1 oclock, the FORE STARBOARD (FS) arc from 1 to 3 oclock, the AFT STARBOARD (AS) arc from 3 to 5 oclock, the AFT (A) arc from 5 to 7, AFT PORT (AP) from 7 to 9 and finally the FORE PORT (FP) from 9 to 11 oclock.

    Each weapon system icon on the SSD has a ring of 6 segments round it that correspond with the 6 fire arcs those arcs through which the weap-on may be fired are left clear, while arcs through which it may NOT fire are filled in black. A weapon may only be fired at a target that is within a valid fire arc of the firing ship during the firing phase of the turn. Even if a ship passed through a valid arc during the movement phase, if it is out of arc by the firing phase it may not be attacked.

    IMPORTANT: It will be noted that all weapon icons on the sample SSDs have the AFT

    (A) arc filled in, even if they can fire through all 5 other arcs; in Full Thrust Light, NO weapon may be fired out of the AFT (A) arc of any ship. Thus the aft 60 degree arc of any ship is a weapons blind spot, though of course incoming enemy fire may hit the ship through this arc exactly as through any other.

    COURSE is the direction of movement; there are 12 possible courses indicated by a clockface with fixed orientation; Firing arcs are using a similar clockface but relative to the ship model, indicated by a ring of 6 arcs surrounding each weapon icon on the SSD.

    F

    FS

    AS

    A

    AP

    FP

    FIRE ARCS

    Example of Class 2 Beam bearing through three forward arcs (FP, F, FS).

    Example of Pulse Torpedo bearing through front arc only

    7

  • SEQUENCE OF PLAYThe sequence for a game turn of Full Thrust Light is as follows:

    Once all players are happy that everything they need to do in the turn is completed, the next game turn begins with a new order plotting phase. The full version of the game introduces a number of extra phases to the turn, but for now the three basic ones here are all youll need.

    A game turn breaks down into Order Plottting, Ship Movement and Weapons Fire Phases.

    PHASE 1: ORDER PLOTTING PHASE

    PHASE 2: SHIP MOVEMENT PHASE

    PHASE 3: SHIP WEAPONS FIRE PHASE

    8

  • ORDER PLOTTING PHASEIn this phase of the turn, all players must write MOVEMENT ORDERS for each of the ships in their fleet. Any ship that does not have an order written for it will continue to move on the same course and at the same velocity as in the pre-vious turn. A ships movement order is usually written in an abbreviated notation as explained below, and must specify any change in velocity (acceleration or deceleration) and/or change in course (to Port or Starboard, and by what amount) that the ship is to perform in this game turn.

    After any changes to velocity or course are plot-ted, the new total velocity is written into the next empty V box on the order plot, and the new course heading is written in the C box, to show the new starting velocity and course for the next turn.

    All ships have one or more DRIVE SYSTEM icons on their SSD, which represent their sublight drive engines. Each drive icon has a number which shows the THRUST POINTS that it provides; a ships total available thrust per game turn is the total of the numbers in all of its functioning drives.A ship that loses all its drive system(s) due to damage is no longer able to change course OR velocity, and will continue to travel at its current course and velocity until it exits the playing area.

    MPORTANT: In Full Thrust Light, all ships may only use up to HALF (rounded UP) of

    their total available thrust points for changing course in any game turn, and any thrust points thus used may NOT also be used for acceleration or deceleration at the same time. The total amount of thrust points applied in one game turn cannot exceed the total thrust points available from the ships drives.

    For example, a ship with Thrust 6 drives could only apply up to 3 of those thrust points for changing course, but it could then use any remaining points for changing velocity in the same game turn if desired. Thus an order plot of +4, P2 (4mu acceleration, with a 2-point turn to Port) would be allowed, but one of +2, P4 would not although 6 thrust points are available in total, the ship is not allowed to use more than 3 of them for course changes.

    Orders for ships must be written down using the movement plot on the ships SSD. Ships without orders continue to move on last course and velocity; Thrust points on the SSD indicate the maximum thrust for acceleration/deceleration and course changes. Up to half of total available thrust points may be used to change course.

    Course plot abbreviations: Acceleration: e.g. +4 Deceleration: e.g. -3 Port turn: e.g. P2 Starboard turn: e.g. S3 Velocity at end of movement: V Course at end of movement: C

    9

  • ACCELERATION AND DECELERATIONOnce a ship is moving, it will continue to move at the same velocity every turn unless THRUST is applied to change that velocity. Thrust points may be used to speed the ship up (accelera-tion) or slow it down (deceleration), with each thrust point changing the ships velocity by 1mu up or down. The use of thrust for acceleration or deceleration is written in the order plotting as plus for acceleration thrust or minus for deceleration, and the number of thrust points being used for example, an order written as +2 would be using 2 thrust points for accel-eration (adding 2mu to the speed), while -3 would be three points (3mu) of deceleration. Any velocity change is applied in the same turn that

    it is plotted, so if a ship ended the previous turn at velocity 6, and has a +2 acceleration plotted for the new turn, it will move 8mu this time. Ships must ALWAYS be moved the full and exact distance indicated by their current velocity the only way to slow a ship down is to apply deceler-ating thrust. Ships may NOT move backwards.

    Each thrust point changes ship velocity by 1 mu. Ships must always move full distance indicated by current velocity. Ships may not move backwards.

    COURSE CLOCK

    TO CHOSEN TABLE EDGE

    MOVEMENT PHASEIn the movement phase, each player moves his ship models in exact accordance with the or-ders he has just written for them in the plotting phase. Both/all players may move their models simultaneously if they wish, or one may move fol-lowed by the other but as both will be following their written orders it will not make any differ-ence; neither player may modify their ordered movement in any way to react to the others moves.

    Execute movement according to written orders.

    10

  • CHANGING COURSEThrust points may also be used to change the course of the ship, at a rate of 1 thrust point = 1 course point (30 degrees) of turn. Course change orders are written in the order plotting in a similar way to velocity changes, with either a P (for turns to Port, or anticlockwise) or an S (for Starboard, or clockwise) followed by the number of thrust points applied to the course change. In terms of the clockface course ref-erences, Port turns are minus and Starboard turns are plus eg: if a ship is currently head-ing on course 3, then a 2-point turn to Port (writ-ten P2) would turn the ship onto course 1, while a 2-point turn to Starboard (S2) would turn it to course 5. Turning the miniature through the cor-rect angle is a lot easier if a simple circular turn gauge is cut from card and marked with the 12 clockface points , but it can also be judged ac-curately enough from the hexagonal base of the ships stand. Whenever a ship changes course, the change is performed half at the START of the ships movement for that game turn, and half at the MID-POINT of the movement.

    EXAMPLE: To explain this more fully, actual movement of the ship miniature is

    performed like this: first the miniature is turned (pivoted on the spot) by HALF rounded DOWN of the total amount of course change plotted for that game turn. Now the miniature is moved HALF its total velocity straight forward in the direction it currently points. Then it is pivoted the remaining half rounded UP of its total course change, and finally moved the remaining half of its total velocity. Note that because of the rounding down of the first part and up of the second part of the any course change, if the ship is only changing course by 1 point then that will occur at the MID-POINT of the movement, with none at the beginning.

    Each thrust point turns ship by 30 degrees (1 clockface point). Half (round down) of turn at starting point, remaining half after moving half its velocity.

    EXAMPLE OF A 3 POINT COURSE CHANGE TO STARBOARD (S3)

    Pivot ship 1 point ( Half of total course change, rounded down). Move ship half of current velocity. Pivot ship 2 points ( half of total course change, rounded up).

    Move Ship remaining half of current velocity. Final position.

    11

  • Order Plotting ExampleSHIP ID START V START C TURN 1 V C TURN 2 V C TURN 3 V C TURN 4 V C

    Example 6 12 +2 8 12 +2, P2 10 10 P1 10 9 -3, S1 7 10

    TURN 18 MU

    5 MU

    5 MU2-point turn TURN 2

    1-point turn TURN 3

    5 MU5 MU

    3.5 MU

    3.5 MU1-point turn TURN 4

    12

  • FIRE PHASEIn this phase all ships that can acquire valid tar-gets may fire any or all of their weapons. In the basic game any given ship may fire any or all of its weapons systems, provided there is a target in range and in the weapons firing arc; as a gen-eral rule, each weapon may fire once only in each game turn. The number of different targets that any one ship may engage is determined by its available FIRE CONTROL SYSTEMS (FCS), as explained below. Within the limitations of the FCS rules, a ships weapons fire may be divided between available targets in any way the player desires. The fire phase starts with a die roll for INITIATIVE between the players each rolls, and the highest scorer has the Firing Initiative for that phase that player may select any ONE of his ships and perform ALL desired firing from that ship against

    any available targets. Once the player declares that all firing from that ship is completed, then the opposing player may select one of his own ships and perform all desired firing from it. Firing then alternates between the players on a ship-by-ship basis until all desired firing is completed. Note that because all damage is inflicted immedi-ately it is possible for a ship to be destroyed (or to lose important weapons systems) BEFORE it has the chance to fire back in that game turn.

    Roll for initiative, winner selects first ship to fire. Resolve fire from that ship and apply damage effects to target immediately. Players alternate firing ships until all firing is completed.

    FIRE CONTROL SYSTEMSEach ship must have at least one functioning Fire Control System (FCS) in order to fire its weapons. Each FCS icon represents the ability to engage ONE target ship in any game turn - for ex-ample a Frigate, with only one FCS, can only fire at one target per turn but it may fire any or all of its weapons at that target, provided that they are within range and firing arc. A Battlecruiser with three FCS can split its fire between UP TO THREE different target ships in the same turn,

    dividing its available weapons in any combination between the targets provided that they are with-in range and fire arc. If a ship loses all its FCS due to damage, it may not fire even if it still has operational weapons.

    Ships may engage one target for each operational Fire Control System

    EXAMPLE

    A

    B

    C

    Ship has no active FCS and may not fire.

    Ship may split its fire between up to 3 targets.

    Ship may only fire at one target.

    13

  • FIRING BEAM WEAPONSEach Beam Weapon icon on a ship represents an energy beam projector, which is the primary weapon system used in Full Thrust Light. The number inside the icon is the class of the beam system, from the smallest (CLASS 1) upwards. Each beam weapon on the ship may fire once per game turn, at one target ship, provided that it is within range and fire arc. At up to 12mu range, a beam weapon rolls a number of dice equal to its CLASS; in every further 12mu range band, this drops by one die. Thus, a CLASS 1 Beam rolls just ONE die at up to 12 mu (its maximum range); a CLASS 2 rolls two dice at up to 12 mu and one die out to 24 mu; a CLASS 3 rolls three dice up to 12 mu, two dice up to 24 mu and just one up to 36 mu. For each die rolled, damage is inflicted on the target as follows: Scores of 1, 2 or 3 = no effect (a miss); 4 or 5 = 1 damage point inflicted, 6 = 2 damage points inflicted. All the beam weap-on fire from one ship against a single target ship may be rolled together.

    EXAMPLE 2: A Cruiser is firing at a target 18 mu away using two Class 2 beams

    (1 die each at 12-24mu) plus a single Class 3 beam (2 dice at 12-24mu), then the player may roll the total of 4 dice at the same time. If he rolled 1, 2, 4 and 6, he would score a total of 3 points of damage (1 point with the roll of 4, 2 points with the 6; the 1 and 2 miss). The cruiser cannot fire its class 1 beams because the target is out of range for them.

    Beam Weapons roll number of dice according to class at 12 mu, reduce by one die per additional 12 mu. Damage is 1 if score is 4 or 5; 2 if score is 6.

    EXAMPLE 1

    3

    36 MU

    12 MU

    3

    3

    3

    EXAMPLE 2

    3

    2

    2

    1

    12 MU out of range

    18 MU target is in range

    24 MU

    12 MU 24 MU 36 MU

    14

  • FIRING PULSE TORPEDOESPulse Torpedo Launchers are heavy weapons with more punch than beam systems; they are generally fitted to the larger ship classes, though specialized smaller ships with PT mountings (and little else) are also possible. The icon for a PTL is similar to the beam icon but with an asterisk (*) inside the circle in place of the beam class number. Each Pulse Torpedo Launcher on the ship may fire once per game turn, at one target ship, provided that it is within range and fire arc. Firing a PTL is a two-step process - first a ROLL TO HIT, according to the range to the target: a single die is rolled per PT fired: at up to 6mu a score of 2+ is needed to hit, and this rises by 1 for every extra 6mu of range - so at 6-12mu it is 3+, 12-18mu 4+, 18-24mu 5+ and finally at 24-30mu a 6 is needed. The maximum range of the Pulse Torpedo is 30mu. If the PT hits the target, then a second die is rolled - the actual number rolled

    (1 to 6) is the number of damage points inflicted on the target ship.

    EXAMPLE: A Battlecruiser fires two PT launchers at a target ship 20mu away.

    This is in the 18-24mu band, so 5+ is needed to hit. The player rolls a 4 and a 6, so one PT misses and one hits. Now the player rolls the damage die for the hit, and scores 3 - the PT hit inflicts 3 points of damage to the target.

    Pulse Torpedoes need to score 2 to hit at 6mu, add 1 to needed score per additional 6 mu. If a hit is scored, roll again, actual number rolled is damage.

    PULSE TORPEDO

    20 MU 5+ is needed to hit

    4 misses

    6 hit with 3 points of damage

    6 MU

    12 MU

    18 MU

    24 MU

    30 MU

    2+ to hit

    3+ to hit

    4+ to hit

    5+ to hit

    6+ to hit

    Roll 1 die for damage at all ranges.

    15

  • RECORDING DAMAGE:Damage points inflicted are applied to the target ship immediately, and are recorded by crossing off the small square HULL BOXES on the ships SSD, starting at the top row and working from left to right, one box per damage point. When the ac-cumulated damage reaches or passes the end of one of the hull box rows, then a THRESHOLD CHECK for critical systems damage is performed as soon as all fire by that particular attacking ship against that target ship is completed. To per-form a threshold check, one die is rolled for EACH system icon on the ship. At the FIRST threshold (first row of hull boxes all marked off), systems are knocked-out on rolls of 1 only; one the SECOND threshold (second row marked off) systems are lost on scores of 1 or 2, and at the THIRD thresh-old (third row) 1, 2 or 3.

    If MORE than one threshold point is passed in the attack from a single ship (which can occur, especially with smaller target ships), then only roll for the worst case threshold but add 1 to the threshold number e.g.: if a ship took so much damage in one attack that both the first and second rows of hull boxes were lost at the same time, only the second row threshold would be rolled for but it would be treated as if it were a third-row check, with systems lost on 1, 2 or 3 instead of just 1 or 2. Systems knocked-out on a threshold check are crossed off the SSD and may not function again for the rest of the game.

    When a DRIVE SYSTEM icon is lost, the ship loses the use of the thrust points provided by that drive (which may be all or part of the ships total available thrust, according to whether the ship has more than one drive icon or not). When ALL of a ships Hull Boxes are marked off, then the ship is destroyed and removed from play.

    16

  • EXAMPLE: An undamaged Heavy Cruiser is hit by enemy fire, taking 6 damage

    points. The first row of hull boxes is marked off, requiring a threshold roll for each system on the SSD. A die is rolled for each system, with a roll of 1 resulting in destruction of that system. In our example, a Fire Control System and a Beam Weapon are lost.

    Later in the game, the damaged cruiser takes another hit from the enemy, this time 8 damage points. Two more hull rows are now marked off and another threshold roll is required. At the third threshold, systems would normally be lost at a roll of 1, 2 or 3. As the damage passed two thresholds in our example, 1 is added to the roll. This means that systems will be destroyed at rolls of 1, 2, 3 or 4. Our Cruiser is badly shot

    up and can no longer change course or velocity but can still fire its remaining Beam Weapons because it still has a functioning Fire Control System.

    Cross off hull boxes from left to right, top to bottom row. Threshold roll is required if end of row is reached. Systems are lost on roll of 1 at first threshold, 2 or less at second, 3 or less at third. If multiple rows are marked off, check only for the highest threshold but add 1 to the required roll

    FIRST HIT SECOND HIT

    17

  • ENDING THE GAMEThe game ends when one players fleet is defeat-ed. Whether this means complete destruction of all ships, or whether one player decides he has lost and withdraws his surviving ships from the battle area, is up to the players to define. Specific scenarios are beyond the scope of this introductory rule set, but it is always a lot more interesting to set some victory conditions rather

    than just fight to the last ship a simple objective like protecting or attacking a freighter or convoy will make a very enjoyable game.

    Game ends when one side is destroyed, withdraws or victory conditions are met.

    Full Thrust and Full Thrust Light are trademarks of GZG, and all material herein is copyright J. M. Tuffley and GZG. Permission is hereby granted to duplicate and/or distribute this document freely for non-commercial purposes provided that a) it is copied complete and unal-tered, and b) it is not offered for sale in any way.

    GROUND ZERO GAMES PO Box 10841, Great Horkesley, Colchester, Essex CO6 4UB, United Kingdom. 2008 GZG and Jon Tuffley.

    PUBLISHER: Ground Zero Games www.gzg.com in cooperation with Mechworld Development Group www.mechworld.de

    WRITTEN BY: Jon Tuffley

    EDITORIAL STAFF: Christian Weinhold, Sascha Keunecke

    GRAPHICS, TYPESETTING AND LAYOUT: Stephan Ludewig

    CG ARTWORK: Sascha Keunecke, Stephan Ludewig

    IMPRINT & DISCLAIMER

    18