Upload
alan-margetts
View
223
Download
4
Tags:
Embed Size (px)
DESCRIPTION
Full Specifiers guide (Issue 06/09)
Citation preview
SPECIFIER’S GUIDEJUNE 2009
By appointment to Her Majesty The Queen
Manufacturers and Installers ofKitchen and Bathroom Furniture
Manhattan Furniture West Sussex
CI/SfB 73.1 X
MANHATTAN SPECIFIER’S GUIDE2
Carcase Key Features
Independent Certification
FIRA Standards
General dimensions (Noggins)
Cubic capacities
Coding guidelines
Base, Highboard, Tall and Wall Units
Base units
Base units - reduced depth
Base bottle storage units
Base corner units
Magic corner & Le-Mans
Base corner ‘L’ shaped units
Base unit corner fillets
Base corner post
Base drawer units (metal-sided
drawer system)
Base drawer units (full-extension soft
closing drawer system)
Base ‘angled’ end display units
Base ‘angled’ peninsular display unit
Base ‘square’ end display units
Base ‘square’ peninsular display unit
Feature: base ‘square’ end display
units
Feature: base ‘square’ peninsular
display unit
Base display back panels
Base display back panel fixing kit
Base fly end panels
Base gull-wing
Base oven housing units
Base microwave housing unit
Base integrated appliance space
conversion kit
Base unit infill panels
Base tray space
Base wine rack unit
Feature: base wine rack unit with
bottle supports
Base sink units
Base corner sink units
Sink Liners
Highboard housing units
Highboard Unit Infill Panels
Tall broom units
Tall unit corner fillets (for tall
housings set at 45 degrees)
650mm Extra deep ends
Tall housing units
Tall housing with Upgraded stays
Tall pull-out larder units
Tall unit infill panels
Tall unit shelves
Tall Wine Rack Units
Wall units (360mm high)
Wall units (575, 720 & 900mm high)
Wall units (dual handed doors)
Wall boiler housing units
3
4
4
5
5
5
6-32
6
6
6
7
7
10
9
9
11
11
12
12
12
12
12
12
10
10
10
13
13
13
14
14
14
13
13
8
9
8
15
15
15
19
14
16
18
17
19
19
19
20
20
20
21
Wall boiler dresser housing units
Wall corner units
Wall corner units 575 high
Wall corner ‘angled’ units
Wall corner ‘angled’ unit fillets
Wall display ‘angled’ unit fillets
Wall corner ‘L’ shaped units
Wall display units (360 & 492mm high)
Wall display units (720 & 900mm high)
Wall display ‘angled’ corner units
Wall display glazed dresser units
Wall display ‘angled’ end units
Wall display ‘square’ end units
Feature: wall ‘square’ end display
units
Wall display glazed units
Wall Display glazed units with
aluminium framed doors
Feature: wall display plate rack unit
Wall display dresser unit and worktop
infills
Wall display dresser tambour units
Wall display bi-folding units
Wall glass shelves
Wall unit infill panels
Wall dresser unit infill panels
Wall microwave housing units
Wall microwave with Upgraded stays
Window soffits
Feature: window soffits
Chimney hood soffits
Wall soil & vent pipe infill spice rack
Wall wine racks
Integrated extractor hood
Integrated extractor hood infill panel
Telescopic cooker hoods
Pilasters
Pilaster decor panels (16mm thick)
Decor and Framing panel
Decor panel self-adhesive cover caps
Upstands
Enable Units and Accessories
enable: Base units - reduced height
enable: Base drawer units
enable: Base drawer unit with pull-
out table surface
enable: Base corner units
enable: Mobile trolley unit
enable: Worktop blanking pelmet
enable: Base corner unit blanking
panel
enable: Half-circle, full-extension
carousels
enable: Highboard housing units
enable: Tall housing units
enable: Wall units
enable: Worktop support bracket
enable: Base unit support bracket
21
22
22
22
22
23
23
23
23
23
25
24
24
24
25
25
24
25
26
26
26
28
28
21
21
28
28
28
27
24
27
27
27
29
29
30-32
32
42
33-40
34
34
34
35
36
35
35
35
36
37
39
40
40
40
42-43
42
42
42
42
42
42
42
42
42
43
43
43
43
43
43
43
46-54
46
47
47
47
48
48
48
49
49
49
50
50
50
51
51
52
53
53
53
52
45
54
enable: Electronic worktop power lift
Kitchen Accessories
Cornice & Light fascia
Plinths & Plinth returns
Plinth Sealer
Plinth ventilation grills
Upstands
Half swing baskets
Breakfast bar legs
Pilasters
Self adhesive cover caps
Timber battens
Worktops
Worktop bolts
Cable Managment
Hinge Options
Upgraide for
Soft Close doors & Drawer
Bathrooms:
General dimensions (Noggins)
Base units
Corner base units
Drawer unit
Sink base units
WC units
Bidet units
Bath Bulkheads
Base infills
Corner post
Plinth
Plinth returns
Pedistal infills
Wall units
Wall unit infills
Tall units
Bath panels
Worktops
Cornice & Light fascia
Bathroom Detailing:
Tall units
Bulkheads
Worktops with WC base units
INTRODUCTION
Welcome to Manhattan’s Specifier’s Guide, our most comprehensive to date.
Carefully compiled to offer greater flexibility and versatility in order to meet your creative aspirations. For practical ergonomics of a totally functional kitchen to an
environment that is the heart of the home with added value features our range of units offers plenty of exciting solutions for both contemporary and traditional kitchens.
CONTENTS
INDEX
MANHATTAN SPECIFIER’S GUIDE 3
CARCASE MATERIAL KEY FEATURES
l All carcase units are produced from 16mm high density (660-670Kg/cubic
metre) melamine faced particle board. This is manufactured to BS EN 312-1, Class
1, low formaldehyde content and BS EN 312 Part 2 and meets the requirements of
both BS EN 7331, 1990 and BS 5669.
l All exposed ends are lipped using high quality 0.4mm matching PVC edging,
applied using a combination of hot melt glue, heat and pressure, which meets the
requirements of BS6250 and BS6222 Part 3, 1993 for moisture and heat resistance.
l All interiors are colour matched to the exterior of the carcase.
l End panels and display units are supplied in either white or a variety of
wood-grain MFC effects to co-ordinate with individual ranges.
HINGE KEY FEATURES
All carcase units are supplied with top quality, fully concealed hinges.
l Tested to BS6222 Part 2, Level H.
l Tested to 200,000 opening/closing cycles. Interestingly, a 15 year research study
showed that the most commonly used doors in the kitchen are opened and closed
up to 170,000 times in a 15 year period. Our hinges are therefore fit for at least 20
years of service.
l Hinge mounting plates are attached to the carcase by Euroscrews to provide
greater strength and durability.
l All hinges are supplied with stainless steel decorative cover caps.
l 107o opening hinges are supplied as standard.
l 172o
opening hinges are available on request.
l Option to have soft closing hinges, available as a upgrade for 107o & 172o opening
hinges available on request.
DRAWER SYSTEM KEY FEATURES
All Manhattan ranges come fitted with a metal-sided drawer system.
l Tested to BS6222 Part 2 1992, Level H, to ensure strength and durability.
l Pressed steel mounting brackets enable perfect alignment of drawer fronts.
l Long self closing action enables drawers to close at the slightest touch with Silent
running roller system.
l Manufactured from pressed formed high quality steel, with drawer sides and
runners finished in long lasting epoxy coating, with easily replaceable components in
the event of accidental damage
l Solid drawer bottom and back, manufactured from 16mm MFC to match the
carcase colour.
l Option to have soft closing drawers available as a upgrade, the drawer are twin-
walled with full extension runners, this option will be available for all base and tall
units.D
ADJUSTABLE LEGS KEY FEATURES
Manhattan’s Base, Highboard and Tall units are fitted with adjustable legs to
provide the following benefits;
l More accurate levelling of units to compensate for uneven floors, thus reducing
installation time and eliminating the need for packing wedges.
l Protection from moisture and flooding by keeping the units 150mm clear of the
floor.
l Provision of a natural service zone for plumbing, electric’s and ducting, enabling
services to run at skirting board level and facilitating installation. This also
ensures flush fitting of appliances.
l Better load distribution, thus reducing stress on fittings and joints.
l Easier fixing of plinth's.
l Allows flooring to be fixed after the installation of the units.
BASE UNIT KEY FEATURES
l 107o 3-way adjustable, fully concealed ‘Clip’ hinges
(172o hinges are available as an option).
l Metal-sided drawer system.
l Adjustable legs.
l 16mm MFC
l Removable solid back panel - 16mm MFC.
l Foil wrapped MDF mullions to 800, 1000 & 1200mm
units.
l Horizontal front rail.
l Adjustable shelves.
l High impact shelf retaining clips.
l Galvanised zinc metal wall fixing brackets.
l Easily removable continuous plinth.
l 70mm additional service zone.
l Shelves to 800, 1000 & 1200mm units are supported
with additional clips to front and back to prevent
bowing under load.
SINK UNIT KEY FEATURES
l Absence of back panel allows direct access to
plumbing and removes the need for an unsightly
notched panel.
l Shortened bottom panel with upturn provides a
70mm void for pipework and services to enter the
carcase.
l UPVC door closing strip to 800, 1000 & 1200mm
units.
l A back panel can be supplied as an optional extra.
WALL UNIT KEY FEATURES
l 316mm deep carcase to provide the additional
storage space so often needed.
l Concealed wall hanging brackets are 3-way
adjustable to ensure perfect alignment and maximum
loading capacity.
l Mini-fix cam dowel construction with additional
wooden dowels for extra strength and rigidity.
l Foil wrapped MDF mullions to 800, 1000 & 1200mm
units.
l Rear MFC blocks glued to the 800, 1000 & 1200mm
units for extra strength and rigidity.
l 8mm solid back panels to wood-grain effect display
units.
l Shelves to 800, 1000 & 1200mm units are supported
with additional clips at the front and back to prevent
bowing under load.
l 107o 3-way adjustable, fully concealed ‘Clip’ hinges
(172o
opening hinges are available on request).
MANHATTAN SPECIFIER’S GUIDE4
‘HAPM’ LIFE ASSESSMENT
A benefit of achieving such high standards is that Manhattan achieves an HAPM life
assessment of 20 years for carcase components and 25 years for doors and drawer
fronts. Housing Association Property Mutual is a club consisting of more than 130
housing associations that provides insurance against premature failure of
components, materials and assemblies in new and refurbishment schemes. The
scheme is underpinned by a manual of lifespans that provide a series of generic
specifications for each component
BRITISH SAFETY COUNCIL AWARD
Manhattan is a member of the British Safety Council and has regularly received the
British Safety Council award.
INDEPENDENT CERTIFICATION
The first kitchen manufacturer to be awarded the Furniture Industry Research
Association ‘FIRA’ - Gold Award for Product to test level H, for heavy domestic use.
This provides:
l Confidence that the purchased product has been evaluated by the UK’s leading
furniture technology centre.
l Assurance that testing has been undertaken to the latest applicable British and
European Standards.
l Impartial verification of quality and performance.
The first contract kitchen manufacturer to also hold the Furniture Industry Research
Association ‘FIRA’ - Gold Award for Installation.
This provides:
l Confidence that our installation service has been evaluated and approved by the
UK’s leading furniture technology centre.
l Peace of mind that the product has been installed to the latest regulations and
highest quality.
l Impartial expert verification of quality.
STANDARDS REQUIRED TO MEET THE FIRA GOLD AWARD TO TEST LEVEL H
STRENGTH AND SAFETY REQUIREMENTS
BS 6222, Part 2, 1997 Level H - specification for strength requirements and
methods of test for fitted kitchen units*.
*FIRA test methods based on BS 4875 where other suitable methods are not
available.
BS 6222, Part 5 - Specification for strength requirements and methods for
test of peninsular units and breakfast bars.
BS EN 14749 - Domestic & Kitchen storage units and worktops safety
requirements
SURFACE FINISHES & ADHESION
BS 6222, Part 3 1999 - Domestic Kitchen Equipment. 'Performance
requirements for durability of surface finishes and adhesion of surfacing and
edging material'.
PARTICLEBOARD AND MDF
BS EN 312 2003 Particleboard Specification Type P2 and Type P3 (WPIF
Industry Standard)
BS EN 622 2006 Fibreboards Specifications Part 5 MDF Type MDF (WPIF
Industry Standard)
WORKTOPS
In addition to BS6222 Part 3 1999 (see above)
BSEN 438 2005 High pressure decorative laminates (HPL) - Sheets based on
Thermosetting Resins" Type HGP
Part 3 Classification and specifications for laminates less than 2 mm thick.
Part 2 Determination of properties.
(High and low relative tests are applied mainly to solid wood door types).
(Medium and low relative humidity tests apply to worktops).
In addition, FIRA carries out its own tests for Workmanship, Environmental
Response, and Ergonomic Assessment.
ENVIRONMENTAL PERFORMANCE
FIRA Standard 48 & FIRA Standard 6250 Specification Furniture materials
(Interior)
WORKMANSHIP
FIRA Standard 41 & FIRA Standard 6250 Specification Furniture materials
(Interior)
Subjective assessment of furniture for quality in terms of sharp edges and
visual defects
ERGONOMICS
Dimensions to comply with BS EN 1116, 1996 FTM's and planning
accordance with BS 3705 provision of space for domestic kitchen furniture.
AUDITING
FIRA audits on an annual basis to ensure that the quality and workmanship,
features of the Gold Award, are being maintained.
FOR PRODUCT FOR INSTALLATION
Winner 2006
StainlessSteel Hood
900WallUnit
BaseUnit
22
44
.00
20
00
.00
14
74
.00
13
92
.00
91
8.0
0
86
2.0
0
1250HighboardUnit
360WallUnit
21
72
.00
16
22
.00
2150HousingUnit &BroomUnits
BaseUnit
MANHATTAN SPECIFIER’S GUIDE 5
150mm
300mm
400mm
450mm
500mm
600mm
800mm
1000mm
1200mm
-
0.01
0.02
-
0.03
0.04
-
-
-
-
0.07
0.09
0.11
0.12
0.14
0.20
0.25
-
0.05
0.11
0.15
0.17
0.19
0.23
0.31
0.39
0.47
-
-
-
-
0.33
0.44
-
-
-
-
0.30
0.41
-
0.52
0.63
-
-
-
-
.033
0.45
-
0.57
0.69
-
-
-
-
-
-
-
0.05
0.06
0.08
0.10
-
0.03
0.06
0.08
0.09
0.10
0.12
0.16
0.20
0.24
0.04
0.07
0.10
0.11
0.12
0.15
0.20
0.25
0.30
Unit Width 568mm deep,140mm highdrawer units
568mm deep,575mm highbase units
568mm deep,720mm highbase units
568mm deep,1400mm highh/board units
568mm deep,2120mm high
tall units
568mm deep,2300mm high
tall units
316mm deep,360mm high
wall units
316mm deep,720mm high
wall units
316mm deep,900mm high
wall units
CODING GUIDELINES
Most single door cabinets have left or right hand opening doors and it is therefore essential to quote the correct type when ordering. A door with hinges to the left
hand side as you are facing the cabinet is a left hand unit, a door with the hinges to the right hand side is a right hand unit.
If an open end display unit is specified on the right hand end of a run of base or wall units, please specify a right hand unit. Likewise, if it is specified on the left at the
end of a run of base or wall units, please specify a left hand unit.
Similarly, all base and base sink corner cabinets can be left or right handed. If the blanking panel is to the left when facing the cabinet, please specify a left hand
model; if the blanking panel is to the right, please specify a right hand unit.
Base sink cabinets can also be left or right handed. If the draining board is to be fitted to the left of the unit, please specify a left hand model; if the draining board is
to be fitted to the right, please specify a right hand model.
Height = from top to bottom Width = from left to right Depth = from back to front
BaseUnit
720WallUnit 360
WallUnit
StainlessSteel Hood
1250HighboardUnit
1970HousingUnit &BroomUnits
86
2.0
0
91
8.0
013
92
.00
16
22
.0021
72
.00
14
74
.00
16
40
.00
18
20
.00
18
84
.00
20
64
.00
360WallUnit
BaseUnit
BaseUnit
CUBIC CAPACITIES
These are calculated on the internal dimensions of the unit, disregarding all drawers, removable shelves and back panels
l Note: cubic capacities are calculated in cubic metres. All dimensions are in millimetres.
SIDE ELEVATION
SIDE ELEVATION FRONT ELEVATION
FRONT ELEVATION
GENERAL DIMENSIONS (F0R 720mm HIGH WALL UNITS WITH 2120mm TALL UNITS)
GENERAL DIMENSIONS (F0R 900mm HIGH WALL UNITS WITH 2300mm TALL UNIT
MANHATTAN SPECIFIER’S GUIDE6
BASE UNITS - REDUCED DEPTH
With full-height door Door height 715mm
With full-height doors Door height 715mm
BASE UNITS
With full-height door Door height 715mm
With full-height doors Door height 715mm
With drawer Drawer front, height 140mm
Door height 570mm
NOTE: DRAWERS SUPPLIED WITH METAL-SIDED DRAWER SYSTEM.
With drawers Drawer front, height 140mm
Door height 570mm
NOTE: DRAWERS SUPPLIED WITH METAL-SIDED DRAWER SYSTEM.
BASE BOTTLE STORAGE UNIT
With full-height, pull-out door Door height 715mm
NOTE: IDEALLY TO BE FITTED EITHER SIDE OF A HOB OR BASE OVEN HOUSING UNIT.NOTE: 2700 UNIT - ONLY AVAILABLE WITH A STAINLESS STEEL DOOR.NOTE: 2719 UNIT - THE STYLE OF THE DOOR WILL DIFFER ACCORDING TO THE RANGE.
WIDTH 568 DEEP
STAINLESS 150 2700
STEEL
DOOR TO 150 2719
MATCH RANGE
WIDTH 316 DEEP
300 Lt Hd 2301
Rt Hd 2302
400 Lt Hd 2303
Rt Hd 2304
450 Lt Hd 2305
Rt Hd 2306
500 Lt Hd 2307
Rt Hd 2308
600 Lt Hd 2309
Rt Hd 2310
800 2311
900 2314
1000 2312
1200 2313
WIDTH 568 DEEP
300 Lt Hd 2601
Rt Hd 2602
400 Lt Hd 2611
Rt Hd 2612
450 Lt Hd 2775
Rt Hd 2776
500 Lt Hd 2621
Rt Hd 2622
600 Lt Hd 2641
Rt Hd 2642
800 2605
900 2688
1000 2615
1200 2637
300 Lt Hd 2603
Rt Hd 2604
400 Lt Hd 2613
Rt Hd 2614
450 Lt Hd 2451
Rt Hd 2452
500 Lt Hd 2623
Rt Hd 2624
600 Lt Hd 2643
Rt Hd 2644
800 2606
900 2453
1000 2616
1200 2636
MANHATTAN SPECIFIER’S GUIDE 7
WIDTH 568 DEEP
600 Lt Hd 2071
(min 336–378) Rt Hd 2072
800 Lt Hd 2661
(min 236–278) Rt Hd 2662
1000 Lt Hd 2663
(min 136–178) Rt Hd 2664
1200 Lt Hd 2059
(min 36–78) Rt Hd 2060
**800 Lt Hd 2789
(min 286–328) Rt Hd 2790
*800 Lt Hd 2028
(min 336–378) Rt Hd 2029
*1000 Lt Hd 2031
(min 236–278) Rt Hd 2032
*1200 Lt Hd 2065
(min 236–278) Rt Hd 2066
600 Lt Hd 2075
(min 336–378) Rt Hd 2076
800 Lt Hd 2657
(min 236–278) Rt Hd 2658
1000 Lt Hd 2627
(min 136–178) Rt Hd 2628
1200 Lt Hd 2063
(min 36–78) Rt Hd 2064
*800 Lt Hd 2019
(min 336–378) Rt Hd 2020
*800 Lt Hd 2023
(min 286–328) Rt Hd 2024
*1000 Lt Hd 2008
(min 236–278) Rt Hd 2009
*1200 Lt Hd2069
(min 236–278) Rt Hd 2070
BASE CORNER UNIT
With full-height door
600mm WIDE UNIT 800mm WIDE UNIT 1000mm WIDE UNIT 1200mm WIDE UNIT
(300mm Wide door) (400mm Wide door) (500mm Wide door) (600mm Wide door)
**800mm WIDE UNIT *800mm WIDE UNIT *1000mm WIDE UNIT *1200mm WIDE UNIT
(450mm Wide door) (500mm Wide door) (600mm Wide door) (2 X 400mm Wide doors)
NOTE: MIN & MAX POSITIONS FROM THE WALL WITH THE FRONT STRIP SET IN THE VERTICAL POSITION RESULTING IN 636MM FROM THE OPPOSING WALL.
With drawer
600mm WIDE UNIT 800mm WIDE UNIT 1000mm WIDE UNIT 1200mm WIDE UNIT
(300mm Wide door) (400mm Wide door) (500mm Wide door) (600mm Wide door)
*800mm WIDE UNIT *800mm WIDE UNIT *1000mm WIDE UNIT *1200mm WIDE UNIT
(500mm Wide door) (450mm Wide door) 600mm Wide door) (2 X 400mm Wide doors)
NOTE: MIN & MAX POSITIONS FROM THE WALL WITH THE FRONT STRIP SET IN THE VERTICAL POSITION RESULTING IN 636MM FROM THE OPPOSING WALL.NOTE: DRAWERS SUPPLIED WITH METAL-SIDED DRAWER SYSTEM.
BASE CORNER UNITS - WITH PULL-OUT ‘MAGIC CORNER’ MECHANISM
With full-height door Carcase height 720mm
Door height 715mm
NOTE: MIN & MAX POSITIONS FROM THE WALL WITH THE FRONT STRIP SET IN THE VERTICAL POSITION RESULTING IN 636MM FROM THE OPPOSING WALL.
WIDTH 568 DEEP
1000 Lt Hd 2195
(min 136-178) Rt Hd 2196
*1000 Lt Hd 2197
(min 236-278) Rt Hd 2198
1000mm WIDE UNIT
(500mm Wide door)
*1000mm WIDE UNIT
(600mm Wide door)
KITCHEN ACCESSORY - HALF CIRCLE, FULL EXTENSION CAROUSELS
Carousels for use in corner units
NOTE: CAROUSEL TRAYS SUPPLIED AS A SINGLE ITEM, IT IS RECOMMENDED THAT YOU SUPPLY TWO CAROUSELS PER BASE CORNER UNIT.NOTE: CAROUSEL TRAYS WILL ONLY SUIT 1000MM BASE CORNER UNITS, WITH A DOOR SIZE OF 500MM.
SIZE CODE
000 X 000 MECH100A
CORNER BASE UNIT WITH LE MANS STORAGE MECHANISM
The Le Mans storage shelves move completely out of the unit for easy access to both shelves
WIDTH CODE
1000 Lt Hd 2055
(min 136-178) Rt Hd 2056
MANHATTAN SPECIFIER’S GUIDE8
WIDTH 316 DEEP
WIDTH 568 DEE
500 Lt Hd 2669
Rt Hd 2670
600 Lt Hd 2671
Rt Hd 2672
800 2655
900 2676
1000 2665
1200 2666
500 Lt Hd 2691
Rt Hd 2692
600 Lt Hd 2696
Rt Hd 2690
1000 Lt Hd 2633
Rt Hd 2634
1200 Lt Hd 2653
Rt Hd 2654
800 2001
900 2013
1000 2699
1200 2014
WIDTH CODE
500 FACM355A
600 FACM349A
800 FACM350A
900 FACM356A
1000 FACM351A
1200 FACM357A
SINK BOTTOM LINERS
Optional extra
BASE SINK UNITS
With full-height door Door height 715mm
With full-height doors Door height 715mm
With non-working drawer Non-working drawer front, height 140mm
Door height 570mm
With non-working drawer and drawer Drawer front, height 140mm
Door height 570mm
NOTE: DRAWERS SUPPLIED WITH METAL-SIDED DRAWER SYSTEM.
With non-working drawers Non-working drawer front, height 140mm
Door height 570mm
WIDTH CODE
600 Lt Hd 2749
Rt Hd 2750
BELFAST SINK UNIT
NOTE: TO SUIT EXTERNAL SIZE OF 200MM DEEP SINK, USING A SIDE HUNG DOOR 450MM HIGH WITH PANEL ABOVE, THIS SIZE DOOR IS NOT PREFERRED DUE TO SAGGING ONTHE HINGES.
MANHATTAN SPECIFIER’S GUIDE 9
WIDTH 568 DEEP
500 6705
600 6706
800 6708
900 6709
1000 6710
1200 6712
WIDTH 568 DEEP
WIDTH 568 DEEP
800 Lt Hd 2625
(min 236–278) Rt Hd 2626
**800 Lt Hd 2791
(min 286–328) Rt Hd 2792
1000 Lt Hd 2631
(min 136–178) Rt Hd 2632
1200 Lt Hd 2015
(min 36–78) Rt Hd 2016
*800 Lt Hd 2645
(min 336–378) Rt Hd 2646
*1000 Lt Hd 2649
(min 236–278) Rt Hd 2650
*1200 Lt Hd 2651
(min 236–278) Rt Hd 2652
800 Lt Hd 2677
(min 236–278) Rt Hd 2678
1000 Lt Hd 2679
(min 136–178) Rt Hd 2680
1200 Lt Hd 2017
(min 36–78) Rt Hd 2018
*800 Lt Hd 2681
(min 336–378) Rt Hd 2682
*1000 Lt Hd 2685
(min 236–278) Rt Hd 2686
*1200 Lt Hd 2693
(min 236–278) Rt Hd 2694
BASE SINK BACK PANELS
Optional extra Height 430mm
BASE SINK CORNER UNITS
With full-height door
800mm WIDE UNIT **800mm WIDE UNIT 1000mm WIDE UNIT 1200mm WIDE UNIT
(400mm Wide door) (450mm Wide door) (500mm Wide door) (600mm Wide door)
*800mm WIDE UNIT *1000mm WIDE UNIT *1200mm WIDE UNIT
(500mm Wide door) (600mm Wide door) (2 X 400mm Wide door)
NOTE: MIN & MAX POSITIONS FROM THE WALL WITH THE FRONT STRIP SET IN THE VERTICAL POSITION RESULTING IN 636MM FROM THE OPPOSING WALL.
With non-working drawer
800mm WIDE UNIT 1000mm WIDE UNIT 1200mm WIDE UNIT
(400mm Wide door) (500mm Wide door) (600mm Wide door)
*800mm WIDE UNIT *1000mm WIDE UNIT *1200mm WIDE UNIT
(500mm Wide door) (600mm Wide door) (2 X 400mm Wide door)
NOTE: MIN & MAX POSITIONS FROM THE WALL WITH THE FRONT STRIP SET IN THE VERTICAL POSITION RESULTING IN 636MM FROM THE OPPOSING WALL.
WIDTH HIGH CODE
636 X 636 720 6018
HEIGHT CODE
720 6022
720 6020
720 6211
BASE CORNER POST
NOTE: A CORNER POST IS FITTED BETWEEN TWO ADJACENT UNITS WHERE A VOID SPACE IS CREATED IN THE CORNER.
BASE UNIT CORNER FILLETS
NOTE: FOR USE WITH FLY ENDS WHEN A FREESTANDING APPLIANCE SPACE IS SPECIFIED AGAINST A 45 DEGREE FALSE WALL
NOTE: FOR USE WITH A 600MM BASE UNIT SET AGAINST A 45 DEGREE FALS WALL WITH A 600MM WALL UNIT AND WALL DISPLAY ANGLED CORNER UNITS 8713/8913
NOTE: FOR USE WITH A 600MM OVEN HOUSING SET AGAINST A 45 DEGREE FALSE WALL WITH A 600MM COOKER AND WALL DISPLAY ANGLED CORNER UNITS 8713/8913
MANHATTAN SPECIFIER’S GUIDE10
BASE CORNER ‘L’ SHAPED UNITS
With full-height doors Door height 715mm
With full-height doors +carousels Door height 715mm
With doors and drawers Drawer height 140mm
Door height 570mm
NOTE: DRAWERS SUPPLIED WITH METAL-SIDED DRAWER SYSTEM.
WIDTH 568 DEEP
936 2040
936 2041
936 2042
BASE DISPLAY PENINSULAR BACK PANEL FIXING KIT
NOTE: TO BE SPECIFIED IN CONJUNCTION WITH A BASE PENINSULAR BACK PANEL (SEE ABOVE).
CODE
6012
BASE FLY END PANELS
Without notch Panel height 900mm
WIDTH DEPTH CODE
16 591 6326
668 6327
HEIGHT WIDTH CODE
VARIABLE VARIABLE 9036
720 1200 8270
720 1600 8271
720 2000 8272
720 2300 8273
900 1200 8275
900 1600 8276
900 2000 8277
900 2300 8278
9
BASE DISPLAY PENINSULAR BACK PANELS
[[[
NOTE: PENINSULAR BACK PANELS SHOULD BE SPECIFIED EITHER 720MM OR 870MM HIGH TO SUIT ADJACENT UNITS. REMEMBER TO SPECIFY HEIGHT, LENGTH AND GRAINDIRECTION WHEN ORDERING.NOTE: WHEN USED IN CONJUNCTION WITH BASE DISPLAY PENINSULAR UNITS, A BACK PANEL FIXING KIT 6012 MUST BE SPECIFIED (SEE BELOW).
MANHATTAN SPECIFIER’S GUIDE10
MANHATTAN SPECIFIER’S GUIDE 11
WIDTH 568 DEEP
500 2607
600 2619
600 2687
500 2647
600 2675
300 2783
400 2784
450 2767
500 2785
600 2786
BASE DRAWER UNITS WITH ‘METAL-SIDED’ THREE-QUARTER OPENING DRAWERS
Three drawer unit - comprising top drawer and two high-sided drawers
450mm deep drawer box, finished in white
1 X Drawer front, height 140mm
2 X Deep drawer fronts, height 283mm
Three drawer unit - comprising top drawer and two pan drawers with railing system
450mm deep drawer box, finished in white
1 X Drawer front, height 140mm
2 X Pan drawer fronts, height 283mm
Four drawer unit - comprising three drawers and one high-sided drawer
450mm deep drawer box, finished in white
3 X Drawer fronts, height 140mm
1 X Deep drawer fronts, height 283mm
Five drawer unit - comprising five standard height drawers
450mm deep drawer box, finished in white
5 X Drawer front, height 140mm
SOFT CLOSING DOORS - UPGRAGE OPTION
Available with to suit all base, wall, highboard and tall units as an optional upgrade
NOTE: THE CODE HING064A = ALL THE DOORS IN ONE KITCHEN, MARK THE QUANTITY OF DOORS IN THE KITCHEN NEXT TO THE CODE HING064ANOTE: NOT SUITABLE FOR BI-FOLD WALL UNITS
DRAWER UNITS WITH TWIN-WALLED, FULL EXTENSION, SOFT CLOSING DRAWERS - UPGRAGE OPTION
Available as un upgrade option to all base and tall units
NOTE: THE CODE MECH126A = ALL THE DRAWERS IN ONE KITCHEN, MARK THE QUANTITY OF DRAWERS IN THE KITCHEN NEXT TO THE CODE MECH126ANOTE: THIS COMES AS STANDARD ON THE FULL EXTENSION DRAWERS DETAILED ABOVE
CODE
CODE
HINGE064A
CODE
MECH126A
WIDTH 568 DEEP
500 2435
600 2436
800 2438
1000 2440
500 2445
600 2446
800 2448
1000 2450
BASE DRAWER UNITS WITH TWIN-WALLED, FULL EXTENSION, SOFT CLOSING DRAWERS
Two drawer unit
450mm deep drawer box, finished in grey
2 X Pan drawer fronts, height 355mm
NOTE: PAN DRAWER DIVIDER RAILS FOR INTERNAL STORAGE ORGANISATION ARE SPECIFIED SEPARATELY SEE PAGE 50NOTE: ON ALL 800MM AND 1000MM WIDE UNITS SOME RANGES MAY HAVE TWO DRAWER FRONTS ATTACHED TO EACH OTHER SIDE BY SIDE.
Three drawer unit
450mm deep drawer box, finished in grey
1 X Cutlery drawer, height 140mm
2 X Pan drawer fronts, height 283mm
NOTE: INTERNAL CUTLERY DRAWERS AND PAN DRAWER DIVIDER RAILS FOR INTERNAL STORAGE ORGANISATION ARE SPECIFIED SEPARATELY SEE PAGE 50NOTE: ON 1000MM WIDE UNITS SOME RANGES MAY HAVE TWO DRAWER FRONTS ATTACHED TO EACH OTHER SIDE BY SIDE.
MANHATTAN SPECIFIER’S GUIDE12
FEATURE UNIT: BASE ‘SQUARE’ DISPLAY END UNITS
MADE FROM 28MM MFC
FEATURE UNIT: BASE ‘SQUARE’ DISPLAY PENINSULAR UNITS
NOTE: MADE FROM 28MM MFC640MM WIDE, DESIGNED TO FIT ADJACENT TO A BASE UNIT WITH A BACK PANEL FIXING KIT 6012 AND PENINSULAR BACK PANEL 9036
WIDTH 568 DEEP
320 Lt Hd 2797
Rt Hd 2798
WIDTH 300 DEEP
640 2796
BASE ‘ANGLED’ END DISPLAY UNITS
With angled shelves
BASE ‘ANGLED’ DISPLAY PENINSULAR UNITS
With angled shelves
NOTE: 600MM WIDE, DESIGNED TO FIT ADJACENT TO A BASE UNIT WITH A BACK PANEL FIXING KIT 6012 AND PENINSULAR BACK PANEL 9036/7 (SEE PAGE 8)
BASE ‘SQUARE’ END DISPLAY UNITS
With square shelves
BASE ‘SQUARE’ DISPLAY PENINSULAR UNITS
With square shelves
NOTE: 600MM WIDE, DESIGNED TO FIT ADJACENT TO A BASE UNIT WITH A BACK PANEL FIXING KIT 6012 AND PENINSULAR BACK PANEL 9036/7 (SEE PAGE 8)
WIDTH 568 DEEP
280 Lt Hd 2600
Rt Hd 2608
WIDTH 280 DEEP
600 2740
WIDTH 568 DEEP
280 Lt Hd 2759
Rt Hd 2760
WIDTH 280 DEEP
600 2758
MATERIAL CODE
MANHATTAN SPECIFIER’S GUIDE 13
BASE MICROWAVE HOUSING UNIT
To suit an integrated microwave
NOTE: THE MICROWAVE MAKE AND MODEL MUST BE SPECIFIED SO THAT EITHER A PAN DRAWER OR INFILL CAN BE MANUFACTURED TO SUIT.
BASE OVEN HOUSING UNITS
To suit an integrated oven
Aperture height 600mm
Infill height 116mm
NOTE: TOP RAIL TO BE REMOVED ON SITE.
To suit an integrated oven unit, with plinth drawer under
Aperture height 600mm
1 X Drawer front, height 116mm
NOTE: TOP RAIL TO BE REMOVED ON SITE.
WIDTH 568 DEEP
600 4614
WIDTH 568 DEEP
600 4615
600 4620
WIDTH 316 DEEP
150 8041
WIDTH 316 DEEP
300 8084
With chrome bottle supports
BASE WINE RACK UNIT
NOTE: CARCASE DEPTH ON THESE UNITS IS ONLY 316MM.NOTE: WHEN SPECIFYING AT THE END OF THE RUN OR ADJACENT TO STANDARD DEPTH BASE UNITS, A DECOR PANEL WILL NEED TO BE SPECIFI
FEATURE BASE WINE RACK UNIT
NOTE: CARCASE DEPTH ON THESE UNITS IS ONLY 316MM.NOTE: WHEN SPECIFYING AT THE END OF THE RUN OR ADJACENT TO STANDARD DEPTH BASE UNITS, A DECOR PANEL WILL NEED TO BE SPECIFIED.
BASE GULL-WING UNITS
With full-height doors 715mm high
WIDTH 568 DEEP
330 Lt Hd 2639
Rt Lh 2638
MANHATTAN SPECIFIER’S GUIDE14
EXTRA DEEP BASE UNIT END PANELS - TO SUIT UNITS USING 650mm DEEP WORKTOPS HAND CODE
LH 6331
RH 6332
Left Hand Right Hand
2120mm 2300mm
EXTRA DEEP PLINTH RETURNS TO SUIT UNITS USING 650mm DEEP WORKTOPS
EXTRA DEEP TALL UNIT END PANELS - TO SUIT UNITS USING 650mm DEEP WORKTOPS
UNITS USING
HEIGHT CODE
179 6079
HEIGHT CODE
1970 6333
2300 6334
How to order the extra deep end panels:
1: Order the base or tall unit that needs an extra deep end as a
standard unit code. Then add SJC A5666 so the extra deep end can
be added to the correct unit on the order
2: Order the extra deep end panel to suit that unit, using the new
codes. Then add SJC A5666 so the extra deep end can be added to
the order.
3: The extra deep end panel will then be fitted to the required unit
on site by one of our fitters
BASE TRAY SPACE
NOTE: SUPPLIED 300MM WIDE, TO BE CUT DOWN ON-SITE TO REQUIRED WIDTH.NOTE: MINIMUM WIDTH IS 100MM.
BASE UNIT INFILL PANELS
Panel height 720mm
NOTE: TO BE ASSEMBLED AND CUT DOWN ON-SITE TO SUIT THE REQUIRED WIDTH.NOTE: MINIMUM WIDTH IS 16MM.
BASE UNIT INTEGRATED APPLIANCE CONVERSION KIT
NOTE: USED TO CONVERT A FREE-STANDING APPLIANCE SPACE OF 620MM TO AN INTEGRATED SPACE OF 600MM.NOTE: STANDARD ‘S’ FRAME FRONT STRIP OF 50MM IS REPLACED WITH THIS SPECIAL FRONT STRIP OF 70MM ON SITE.
WIDTH 568 DEEP
300 6001
WIDTH 720 HIGH
150 8030
300 8013
400 8088
HEIGHT WIDTH CODE
720 70 6019
MANHATTAN SPECIFIER’S GUIDE 15
HIGHBOARD HOUSING UNITS - 1400MM HIGH
To suit an integrated single oven
Unit height 1400mm
Carcase height 1250mm
Aperture 590mm
Infill panel to suit
Door height 570mm
To suit an integrated double oven
Unit height 1400mm
Carcase height 1250mm
Aperture 876mm
Infill panel to suit
Drawer height 283mm
To suit a refrigerator and/or freezer
Unit height 1400mm
Carcase height 1250mm
Aperture 1217mm
Door height 1245mm
HIGHBOARD UNIT INFILL PANELS
Panel height 1250mm
NOTE: TO BE ASSEMBLED AND CUT DOWN ON-SITE TO SUIT THE REQUIRED WIDTH.NOTE: MINIMUM WIDTH IS 16MM.
WIDTH 568 DEEP
600 Lt Hd 4801
Rt Hd 4802
600 4805
WIDTH 1250 HIGH
150 8085
300 8086
400 8089
WIDTH 2120 HIGH 2300 HIGH
300 Lt Hd 3643 Lt Hd 3683
Rt Hd 3644 Rt Hd 3684
400 Lt Hd 3645 Lt Hd 3685
Rt Hd 3646 Rt Hd 3686
500 Lt Hd 3647 Lt Hd 3687
Rt Hd 3648 Rt Hd 3688
600 Lt Hd 3649 Lt Hd 3689
Rt Hd 3650 Rt Hd 3690
2120 high 2300 high
TALL BROOM UNITS
Unit height 2120mm
Carcase height 1970mm
Top door height 1245mm
Bottom door height 715mm
or
Unit height 2300mm
Carcase height 2150mm
Top door height 1245mm
Bottom door height 895mm
HIGHBOARD LARDER / BROOM UNITS - 1400MM HIGH
Unit height 1400mm
Carcase height 1250mm
Door height 1245
WIDTH 568 DEEP
300 Lt Hd 2809
Rt Hd 2810
400 Lt Hd 2811
Rt Hd 2812
500 Lt Hd 2813
Rt Hd 2814
600 Lt Hd 2815
Rt Hd 2816
600 Lt Hd 4815
Rt Hd 4816
MANHATTAN SPECIFIER’S GUIDE16
DEPTH WIDTH 2120 HIGH 2300 HIGH
568 600 Lt Hd 4621 Lt Hd 4651
Rt Hd 4622 Rt Hd 4652
568 600 Lt Hd 4647 Lt Hd 4649
Rt Hd 4648 Rt Hd 4650
568 600 4667 4669
568 600 Lt Hd 4671 Lt Hd 4673
Rt Hd 4672 Rt Hd 4674
2120 high 2300 high
2120 high 2300 high
2120 high 2300 high
2120 high 2300 high
TALL HOUSING UNITS
To suit a single oven
Unit height 2120mm
Carcase height 1970mm
Top door height 570mm
Infill panel to suit
Aperture 664mm
Bottom door height 715mm
or
Unit height 2300mm
Carcase height 2150mm
Top door height 715mm
Infill panel to suit
Aperture 699mm
Bottom door height 715mm
To suit a single oven and microwave with short base door
Unit height 2120mm
Carcase height 1970mm
Top door height 355mm
Infill panel to suit
Aperture 1030mm
Bottom door height 570mm
or
Unit height 2300mm
Carcase height 2150mm
Top door height 450mm
Infill panel to suit
Aperture 1115mm
Bottom door height 570mm
To suit a single oven and microwave with pan drawers
Unit height 2120mm
Carcase height 1970mm
Top door height 355mm
Infill panel to suit
Aperture 1030mm
Bottom pan drawers 2 X height 283mm
or
Unit height 2300mm
Carcase height 2150mm
Top door height 450mm
Infill panel to suit
Aperture 1115mm
Bottom pan drawers 2 X height 283mm
To suit a double oven with short base door
Unit height 2120mm
Carcase height 1970mm
Top door height 450mm
Infill panel to suit
Aperture 932mm
Bottom door height 570mm
or
Unit height 2300mm
Carcase height 2150mm
Top door height 570mm
Infill panel to suit
Aperture 989mm
Bottom door height 570mm
SPECIFICATION OF APPLIANCES TO SUIT A HOUSING UNIT
Manhattan can supply both highboard and tall housing units to accommodate a wide selection of built in ovens, refrigerators, freezers, microwaves and combinations.
The appliance manufacturer and model must be specified when ordering to enable us to prepare exact sizes and if necessary, detail special units to suit individual
requirements.
Where the appliance height is less than the aperture size, an infill panel is fitted.
All appliances must be fitted strictly in accordance with the manufacturer’s instructions.
Please check the manufacturer’s appliance instructions with regard to specific ventilation requirements: it may be necessary to notch the plinth locally.
MANHATTAN SPECIFIER’S GUIDE 17
TALL HOUSING UNITS - CONTINUED
To suit a double oven with pan drawers
Unit height 2120mm
Carcase height 1970mm
Top door height 450mm
Infill panel to suit
Aperture 932mm
Bottom pan drawers 2 X height 283mm
or
Unit height 2300mm
Carcase height 2150mm
Top door height 570mm
Infill panel to suit
Aperture 989mm
Bottom pan drawers 2 X height 283mm
To suit a double oven and microwave with pan drawer
Unit height 2120mm
Carcase height 1970mm
Top door height 355mm
Infill panel to suit
Aperture 1311mm
Bottom pan drawers 1 X height 283mm
or
Unit height 2300mm
Carcase height 2150mm
Top door height 450mm
Infill panel to suit
Aperture 1396mm
Bottom pan drawers 1 X height 283mm
To suit a refrigerator and/or freezer
Unit height 2120mm
Carcase height 1970mm
Top door height 1245mm
Bottom door height 715mm
Aperture 1937mm
or
Unit height 2300mm
Carcase height 2150mm
Top door height 1245mm
Bottom door height 895mm
Aperture 2117mm
NOTE: DOOR ORIENTATION WILL VARY DEPENDING ON THE APPLIANCE THAT HAS BEEN SPECIFIED.
TALL PULL-OUT LARDER UNITS
Unit height 2120mm
Carcase height 1970mm
Top door height 1245mm
Bottom door height 715mm
or
Unit height 2300mm
Carcase height 2150mm
Top door height 1245mm
Bottom door height 895mm
DEPTH WIDTH 2120 HIGH 2300 HIGH
568 300 3625 3627
DEPTH WIDTH 2120 HIGH 2300 HIGH
568 600 Lt Hd 4659 Lt Hd 4661
Rt Hd 4660 Rt Hd 4662
568 600 4663 4665
568 600 Lt Hd 4645 Lt Hd 4655
Rt Hd 4646 Rt Hd 4656
2120 high 2300 high
2120 high 2300 high
2120 high 2300 high
2120 high 2300 high
TALL HOUSING UNITS with UPGRADED TOP DOOR STAY
To suit a single oven and microwave with short base door
Unit height 2120mm
Carcase height 1970mm
Top door height 355mm
Infill panel to suit
Aperture 1030mm
Bottom door height 570mm
or
Unit height 2300mm
Carcase height 2150mm
Top door height 450mm
Infill panel to suit
Aperture 1115mm
Bottom door height 570mm
To suit a single oven and microwave with pan drawers
Unit height 2120mm
Carcase height 1970mm
Top door height 355mm
Infill panel to suit
Aperture 1030mm
Bottom pan drawers 2 X height 283mm
or
Unit height 2300mm
Carcase height 2150mm
Top door height 450mm
Infill panel to suit
Aperture 1115mm
Bottom pan drawers 2 X height 283mm
To suit a double oven and microwave with pan drawer
Unit height 2120mm
Carcase height 1970mm
Top door height 355mm
Infill panel to suit
Aperture 1311mm
Bottom pan drawers 1 X height 283mm
or
Unit height 2300mm
Carcase height 2150mm
Top door height 450mm
Infill panel to suit
Aperture 1396mm
Bottom pan drawers 1 X height 283mm
To suit a double oven with pan drawers
Unit height 2120mm
Carcase height 1970mm
Top door height 450mm
Infill panel to suit
Aperture 932mm
Bottom pan drawers 2 X height 283mm
2120 high
MANHATTAN SPECIFIER’S GUIDE18
DEPTH WIDTH 2120 HIGH 2300 HIGH
568 600 Lt Hd 4683 Lt Hd 4685
Rt Hd 4684 Rt Hd 4686
568 600 4679 4680
568 600 4681 4682
568 600 Lt Hd 4687
Rt Hd 4688
2120 high 2300 high
2120 high 2300 high
2120 high 2300 high
MANHATTAN SPECIFIER’S GUIDE 19
TALL HOUSING UNITS with UPGRADED TOP DOOR STAY - CONTINUED
To suit a double oven with short base door
Unit height 2120mm
Carcase height 1970mm
Top door height 450mm
Infill panel to suit
Aperture 932mm
Bottom door height 570mm
DEPTH WIDTH 2120 HIGH
568 600 Lt Hd 4677
Rt Hd 4678
2120 high
DISPLAY WINE RACKS
NOTE: CARCASE DEPTH ON THESE UNITS IS ONLY 316MM.NOTE: WHEN SPECIFYING AT THE END OF THE RUN OR ADJACENT TO STANDARD DEPTH BASE UNITS, A DECOR PANEL WILL NEED TO BE SPECIFIED.
WIDTH 2120 HIGH 2300 HIGH
150 3700 3701
2120 high 2300 high
TALL UNIT INFILL PANELS
NOTE: TO BE ASSEMBLED AND CUT DOWN ON-SITE TO SUIT THE REQUIRED WIDTH.NOTE: MINIMUM WIDTH IS 16MM.NOTE: 1970MM HIGH INFILL PANEL TO BE USED WITH 2120MM HIGH TALL UNITS.NOTE: 2150MM HIGH INFILL PANEL TO BE USED WITH 2300MM HIGH TALL UNITS.
TALL UNIT SHELVES
NOTE: SHELVES MANUFACTURED FROM 16MM MELAMINE FACED CHIPBOARD, LIPPED WITH 0.6MM PVC EDGING. COLOUR DECIDED BY RANGE CHOICES.NOTE: SUPPLIED AS A PAIR WITH SHELF CLIPS.NOTE: SHELF WIDTH ANNOTATED IS NOMINAL TO SUIT UNITS.
WIDTH 2120 HIGH 2300 HIGH
150 8032 8031
300 8016 8014
400 8092 8093
WIDTH CODE
300 6027
400 6024
500 6028
600 6029
TALL UNIT CORNER FILLETS - FOR OVENS SET AT 45 DEGREES
To suit a tall unit set at 45 degrees
To suit a tall oven housing set at 45 degrees
1970 HIGH 2150 HIGH
6207 6209
6210 6213
NOTE: FOR USE WITH A 600MM TALL UNIT SET AGAINST A 45 DEGREE FALSE WALL WITH ADJACENT TALL UNITS.NOTE: 1970MM CORNER INFILL TO BE USED WITH 2120MM HIGH TALL UNITS.NOTE: 2150MM CORNER INFILL TO BE USED WITH 2300MM HIGH TALL UNITS.
NOTE: FOR USE WITH A 600MM TALL OVEN HOUSING SET AGAINST A 45 DEGREE FALSE WALL WITH ADJACENT TALLUNITS. THIS PREVENTS THE OVEN HANDLE CLASHING WITH ADJACENT DOORS.NOTE: 1970MM CORNER INFILL TO BE USED WITH 2120MM HIGH TALL UNITS.NOTE: 2150MM CORNER INFILL TO BE USED WITH 2300MM HIGH TALL UNITS.
MANHATTAN SPECIFIER’S GUIDE20
WALL UNITS
With full-height, lift-up door
NOTE: ON 800MM AND 1000MM WIDE UNITS SOME RANGES MAY HAVE TWO DOORS ATTACHED TO EACH OTHER SIDE BY SIDE.NOTE: ON 800MM AND 1000MM WIDE UNITS THERE WILL BE AN INTERNAL SUPPORT RAIL BETWEEN THE TOP AND BOTTOM OF THE UNIT.WALL UNITS
WIDTH 360 HIGH
500 8360
600 8361
800 8371
1000 8363
WALL UNITS - DUAL HANDED
With full-height, dual-handed doors
NOTE: IDEALLY USED ADJACENT TO A COOKER HOOD TO PREVENT DOOR CLASHES, OR INTO A CORNER ALSO TO PREVENT DOOR CLASHES.
WIDTH 720 HIGH 900 HIGH
800 Lt Hd 8803 Lt Hd 8813
Rt Hd 8804 Rt Hd 8814
900 Lt Hd 8811 N/A
Rt Hd 8812 N/A
1000 Lt Hd 8805 Lt Hd 8815
Rt Hd 8806 Rt Hd 8816
720 high 900 high
WALL UNITS with UPGRADE TOP DOOR STAY
With full-height, lift-up door
NOTE: ON 800MM AND 1000MM WIDE UNITS SOME RANGES MAY HAVE TWO DOORS ATTACHED TO EACH OTHER SIDE BY SIDE.NOTE: ON 800MM AND 1000MM WIDE UNITS THERE WILL BE AN INTERNAL SUPPORT RAIL BETWEEN THE TOP AND BOTTOM OF THE UNIT.WALL UNITS
WIDTH 360 HIGH
500 8375
600 8376
800 8378
1000 8380
WALL UNITS 575mm HIGHWith full-height door WIDTH 575 DEEP
300 Lt Hd 8539
Rt Hd 8540
400 Lt Hd 8541
Rt Hd 8542
450 Lt Hd 8551
Rt Hd 8552
500 Lt Hd 8543
Rt Hd 8544
600 Lt Hd 8545
Rt Hd 8546
800 8547
900 8553
1000 8548
WALL UNITS
With full-height door
WIDTH 720 HIGH 900 HI
300 Lt Hd 8791 Lt Hd 8901
Rt Hd 8792 Rt Hd 8902
400 Lt Hd 8711 Lt Hd 8911
Rt Hd 8712 Rt Hd 8912
450 Lt Hd 8837 N/A
Rt Hd 8838 N/A
500 Lt Hd 8721 Lt Hd 8921
Rt Hd 8722 Rt Hd 8922
600 Lt Hd 8741 Lt Hd 8941
Rt Hd 8742 Rt Hd 8942
800 8706 8906
900 8733 N/A
1000 8716 8916
1200 8758 8958
720 high 900 high
720 high 900 high
575 high 575 high
MANHATTAN SPECIFIER’S GUIDE 21
WALL BOILER HOUSING UNITS
With full-height door
With full-height door
WALL BOILER HOUSING DRESSER UNITS
With full-height door
NOTE: VENTILATION GRILLS ARE FITTED ON OPPOSITE SIDE TO THE HINGES. IT IS IMPORTANT THEREFORE THAT THESE ARE NOT COVERED BY ANYOTHER UNITS.NOTE: THE DRAWER IS ATTACHED TO THE CARCASE AND IS A NON-WORKING DRAWER.
DEPTH WIDTH 720 HIGH 900 HIGH
316 500 Lt Hd 8795 Lt Hd 8895
Rt Hd 8796 Rt Hd 8896
600 Lt Hd 8797 Lt Hd 8897
Rt Hd 8798 Rt Hd 8898
380 500 Lt Hd 8765 Lt Hd 8965
Rt Hd 8766 Rt Hd 8966
600 Lt Hd 8761 Lt Hd 8961
Rt Hd 8762 Rt Hd 8962
DEPTH WIDTH 1212 HIGH 1392 HIGH
380 600 Lt Hd 8883 Lt Hd 8887
Rt Hd 8884 Rt Hd 8888
720 high 900 high
720 high 900 high
1212 high 1392 high
WALL MICROWAVE HOUSING UNIT with UPGRADED TOP DOOR STAY
To suit 316mm deep wall units
NOTE: THE MICROWAVE MANUFACTURER AND MODEL NUMBER MUST BE SPECIFIED SO THAT THE INFILL CAN BE MANUFACTURED TO SUIT.
WIDTH 720 HIGH 900 HIGH
500 4675 4697
600 4676 4698
720 high 900 high
WALL MICROWAVE HOUSING UNIT
To suit 316mm deep wall units
NOTE: THE MICROWAVE MANUFACTURER AND MODEL NUMBER MUST BE SPECIFIED SO THAT THE INFILL CAN BE MANUFACTURED TO SUIT.
WIDTH 720 HIGH 900 HIGH
500 4635 4695
600 4636 4696
720 high 900 high
MANHATTAN SPECIFIER’S GUIDE22
WALL CORNER UNITS
With full-height door - 600mm carcase width
With full-height door - 600mm carcase width
With full-height door - 800mm carcase width
With full-height door - 900mm carcase width
WALL CORNER ‘ANGLED’ UNIT FILLETS
NOTE: FILLETS SUPPLIED AS A PAIR.NOTE: FILLETS MUST BE SPECIFIED WHEN USING WALL ANGLED CORNER UNITS (8775, 8776, 8795 AND 8796) IN THE MIDDLE OF A RUN; THIS IS TO ENSURE BASE AND WALLUNIT ALIGNMENT FOR PLANNING REQUIREMENTS (SEE ABOVE).
WALL CORNER ‘ANGLED’ UNITS
With full-height door
NOTE: FILLETS MUST BE SPECIFIED SEPARATELY TO SUIT MODULAR REQUIREMENTS WHEN USED IN THE MIDDLE OF A RUN (SEE BELOW) NOTE: WHEN USED AT THE END OF A RUN A DECOR PANEL MUST BE SPECIFIED (CODES 8018/8068 FOR 16MM MFC, OR 8257/8258 FOR 28MM MFC).
DOOR WIDTH 720 HIGH 900 HIGH
300 Lt Hd 8793 Lt Hd 8801
(min 36-78) Rt Hd 8794 Rt Hd 8802
400 Lt Hd 8821 Lt Hd 8861
(min 136-178) Rt Hd 8822 Rt Hd 8862
450 Lt Hd 8823 N/A
(min 186-228) Rt Hd 8824 N/A
500 Lt Hd 8825 Lt Hd 8865
(min 236-278) Rt Hd 8826 Rt Hd 8866
500 Lt Hd 8827 Lt Hd 8867
(min 36-78) Rt Hd 8828 Rt Hd 8868
600 Lt Hd 8829 Lt Hd 8869
(min 136-178) Rt Hd 8830 Rt Hd 8870
600 Lt Hd 8831 Lt Hd 8871
(min 36-78) Rt Hd 8832 Rt Hd 8872
WIDTH 720 HIGH 900 HIGH
618 Lt Hd 8775 Lt Hd 8975
Rt Hd 8776 Rt Hd 8976
WIDTH 720 HIGH 900 HIGH
18 6037 6039
720 high 900 high
720 high 900 high
720 high 900 high
720 high 900 high
720 high 900 high
WALL CORNER UNIT 575mm HIGH
With full-height door - 600mm carcase width
UNITS
DOOR WIDTH WIDTH 575 HIGH
300 600 Lt Hd 8549
(min 36-78) Rt Hd 8550
575 high
MANHATTAN SPECIFIER’S GUIDE 23
WIDTH 720 HIGH 900 HIGH
250 8713 8913
WIDTH 720 HIGH 900 HIGH
400 8740 8940
450 8745 8945
500 8725 8925
600 8728 8928
WIDTH 360 HIGH 492 HIGH
400 8364 N/A
500 8365 N/A
600 8366 8466
WIDTH 720 HIGH 900 HIGH
636 8755 N/A
WALL DISPLAY ‘ANGLED’ UNIT FILLETS
NOTE: FILLETS SUPPLIED AS A PAIR.NOTE: FOR USE WITH A 600MM OVEN HOUSING AND 6211 FILLETS (SEE PAGE 9) SET AGAINST A 45 DEGREE FALSE WALL WITH A 600MM COOKER HOOD AND WALL DISPLAYANGLED CORNER UNITS 8713/8913 (SEE PAGE 22).
WALL DISPLAY UNITS
WALL DISPLAY UNITS
With full-height door
WALL CORNER ‘L’ SHAPED UNITS
With full-height door
WALL DISPLAY ‘ANGLED’ CORNER UNITS
720 high
720 high 900 high
720 high 900 high
360 high 492 high
WIDTH 720 HIGH 900 HIGH
34 6038 6041
W
MANHATTAN SPECIFIER’S GUIDE24
FEATURE UNIT: WALL DISPLAY PLATE RACK UNIT
Chrome plate supports
WIDTH 720 HIGH 900 HIGH
WIDTH 720 HIGH 900 HIGH
500 8757 N/A
600 8759 N/A
WALL DISPLAY END UNITS
With angled shelves
With square shelves
FEATURE UNIT: WALL DISPLAY END UNITS
FEATURE UNIT: WALL DISPLAY END UNITS
NOTE: NOT AVAILABLE TO SUIT 900MM HIGH WALL UNITS.THIS UNIT IS MADE FROM 28MM MFC
WIDTH 720 HIGH 900 HIGH
320 Lt Hd 8799 N/A
Rt Hd 8800 N/A
WIDTH 720 HIGH 900 HIGH
280 Lt Hd 8705 Lt Hd 8905
Rt Hd 8700 Rt Hd 8900
280 Lt Hd 8779 Lt Hd 8979
Rt Hd 8780 Rt Hd 8980
720 high 900 high
720 high 900 high
WALL WINE RACK
To suit 316mm deep wall units
WIDTH 720 HIGH 900 HIGH
150 8707 8907
720 high 900 high
MANHATTAN SPECIFIER’S GUIDE 25
WALL DISPLAY GLAZED UNITS
With full-height door
NOTE: THE STYLE OF THE DOOR WILL DIFFER ACCORDING TO THE RANGE CHOICES.
With full-height doors
NOTE: THE STYLE OF THE DOOR WILL DIFFER ACCORDING TO THE RANGE CHOICES.
WALL DISPLAY ‘ALUMINIUM FRAMED GLAZED’ UNITS
With full-height door
NOTE: SUPPLIED WITH A 20MM ALUMINIUM FRAME WITH FROSTED GLASS AND HORIZONTAL ALUMINIUM ‘D’ HANDLE.
WALL DISPLAY ‘ALUMINIUM FRAMED GLAZED’ UNITS
NOTE: SUPPLIED WITH A 20MM ALUMINIUM FRAME WITH FROSTED GLASS AND HORIZONTAL ALUMINIUM ‘D’ HANDLE.NOTE: 800 AND 1000MM UNITS ARE SUPPLIED WITH DOUBLE DOORS.
WIDTH 720 HIGH 900 HIGH
400 Lt Hd 8719 N/A
Rt Hd 8720 N/A
500 Lt Hd 8723 Lt Hd 8923
Rt Hd 8724 Rt Hd 8924
600 Lt Hd 8743 N/A
Rt Hd 8744 N/A
800 8714 N/A
1000 8717 8917
WIDTH 360 HIGH
500 8369
600 8370
800 8367
1000 8368
WIDTH 720 HIGH 900 HIGH
400 Lt Hd 8853 N/A
Rt Hd 8854 N/A
500 Lt Hd 8847 N/A
Rt Hd 8848 N/A
600 Lt Hd 8855 N/A
Rt Hd 8856 N/A
800 8857 N/A
1000 8849 N/A
1000 wide
720 high 900 high
720 high 900 high
720 high 900 high
WALL DISPLAY GLAZED DRESSER UNITS
With integral drawer
NOTE: THE STYLE OF THE DOOR WILL DIFFER ACCORDING TO THE RANGE CHOICES.NOTE: 1212MM DRESSER UNITS TO SUIT 720MM HIGH WALL UNITS, 1392MM DRESSER UNITS TO SUIT 900MM HIGH WALL UNITS,
WIDTH 1212 HIGH 1392 HIGH
500 Lt Hd 8993 Lt Hd 8989
Rt Hd 8992 Rt Hd 8988
1212 high 1392 high
WALL DRESSER UNIT WORKTOP FILLET
NOTE: TO SUIT WALL DISPLAY DRESSER UNIT WHEN USING 28-30MM THICK SOLID SURFACE WORKTOPS.NOTE: 6091 - TO SUIT BOTH 500 AND 600MM WIDE UNITS.NOTE: 6093 - TO SUIT 1000MM WIDE UNITS.
SIZE CODE
TO SUIT 500 & 600MM 6091
TO SUIT 1000MM 6093
MANHATTAN SPECIFIER’S GUIDE26
WALL UNIT GLASS SHELVES
To suit 316mm deep wall units - Optional extra
NOTE: SUPPLIED WITH GLASS SHELF CLIPS.NOTE: SHELF WIDTH ANNOTATED IS NOMINAL TO SUIT UNITS.NOTE: 800 AND 1000MM WALL DISPLAY BI-FOLDING UNITS CANNOT BE UPGRADED TO HAVE INTERNAL GLASS SHELVING.
WALL DISPLAY BI-FOLDING UNITS
With solid doors 2 X Doors, height 355mm
NOTE: WHEN USING VERTICAL BI-FOLDING UNITS, AVOID THE USE OF CORNICE LIGHTING AS THESE MAY STRIKE WHEN THE DOOR IS FULLY OPENED.
With ‘aluminium frame glazed’ doors 2 X Aluminium framed doors, height 355mm
NOTE: SUPPLIED WITH A 20MM ALUMINIUM FRAME WITH FROSTED GLASS AND HORIZONTAL ALUMINIUM ‘D’ HANDLE.NOTE: WHEN USING VERTICAL BI-FOLDING UNITS, AVOID THE USE OF CORNICE LIGHTING AS THESE MAY STRIKE WHEN THE DOOR IS FULLY OPENED.
With solid and ‘aluminium frame glazed’ doors 1 X Top door, height 355mm
1 X Aluminium framed bottom door, height 355mm
NOTE: SUPPLIED WITH A 20MM ALUMINIUM FRAME WITH FROSTED GLASS AND HORIZONTAL ALUMINIUM ‘D’ HANDLE.NOTE: WHEN USING VERTICAL BI-FOLDING UNITS, AVOID THE USE OF CORNICE LIGHTING AS THESE MAY STRIKE WHEN THE DOOR IS FULLY OPENED.NOTE: THE ALUMINIUM FRAME GLAZED DOOR IS ALWAYS SUPPLIED AT THE BOTTOM OF THE UNIT, BELOW THE SOLID DOOR.
WALL DISPLAY DRESSER TAMBOUR UNITS
NOTE: WHEN USING WITH 28/30MM SOLID SURFACES, YOU WILL NEED TO SPECIFY AN INFILL PANEL THE WIDTH OF THE UNIT X 339MM DEEP X 10MM THICK. THIS IS TO ALLOWALIGNMENT OF THE WALL, WALL DRESSER AND TALL UNITS.
WIDTH 1212 HIGH 1392 HIGH
500 8514 N/A
600 8515 N/A
WIDTH CODE
400 GLAS070B
500 GLAS071A
600 GLAS072A
800 GLAS073A
900 GLAS069A
1000 GLAS074A
WIDTH 720 HIGH
500 8555
600 8556
800 8558
1000 8560
500 8565
600 8566
800 8568
1000 8570
500 8575
600 8576
800 8578
1000 8580
720 high
720 high
720 high
1212 high
MANHATTAN SPECIFIER’S GUIDE 27
INTEGRATED EXTRACTOR HOOD
NOTE: 450MM HIGH TO SUIT 720MM WALL UNITS.NOTE: WHEN USING 900MM WALL UNITS, AN INTEGRATED EXTRACTOR HOOD INFILL PANEL MUST BE SPECIFIED (SEE BELOW).
INTEGRATED EXTRACTOR HOOD INFILL PANEL
NOTE: 175MM INFILL TO BE USED IN CONJUNCTION WITH INTEGRATED EXTRACTOR HOOD TO SUIT 900MM WALL UNITS.
TELESCOPIC COOKER HOOD
NOTE: THESE COOKER HOODS CAN NOT BE USED WITH GAS HOBS AS IT WILL BREACH CORGI REGULATIONS AND BS6172. ELECTRIC, CERAMIC AND INDUCTION HOBS ARE FINE.
NOTE: DESIGNED TO SUIT NEFF TELESCOPIC SENSOR HOODS MODELS D4692, 4672 & D4972 ONLY, NOTE: WHEN SPECIFYING MODEL D4972 FOR INSTALLATION INTO THE 900WIDE HOOD UNIT, YOU WILL NEED TO SPECIFY THE INSTALLATION KIT Z5420X0, AS THIS HOOD IS DESIGNED TO BE FITTED INTO A 600WIDE UNIT WITHOUT THE KIT OR 900 WIDEUNITS WITH THE KIT.
NOTE: INTERNAL WALL UNIT SHELVING IS REDUCED DEPTH TO ALLOW FOR EXTRACTOR MECHANISM; BEST SUITED FOR USE WITH SMALL SPICE JARS, ETC.
WIDTH 450 HIGH
600 CH700
WIDTH 175 HIGH
600 8168
WIDTH 720 HIGH 900 HIGH
600 Lt Hd 8164 N/A
Rt Hd 8165 N/A
900 8166 N/A
600 wide 900 wide
WALL SOIL & VENT PIPE INFILL SPICE RACK
NOTE: TO BE ASSEMBLED AND CUT DOWN ON-SITE TO REQUIRED WIDTH.
WIDTH 720 HIGH 900 HIGH
300 1522 N/A
720 high
WIDTH 720 HIGH 900 HIGH
636 X 636 6018 6023
WALL CORNER POST
NOTE: A CORNER POST IS FITTED BETWEEN TWO ADJACENT UNITS WHERE A VOID SPACE IS CREATED IN THE CORNER.
MANHATTAN SPECIFIER’S GUIDE28
WALL UNIT INFILL PANELS
NOTE: TO BE ASSEMBLED AND CUT DOWN ON-SITE TO REQUIRED WIDTH.NOTE: MINIMUM WIDTH IS 16MM.
WALL DRESSER UNIT INFILL PANELS
NOTE: TO BE ASSEMBLED AND CUT DOWN ON-SITE TO REQUIRED WIDTH.NOTE: MINIMUM WIDTH IS 16MM.
FEATURE UNIT: 28mm WINDOW SOFFIT PANELS
NOTE: SUPPLIED READY TO BE CUT TO SIZE ON-SITE.
WINDOW SOFFITS
Without pelmet
NOTE: SUPPLIED READY TO BE CUT TO SIZE ON-SITE.
WIDTH 720 HIGH 900 HIGH
150 8754 8930
300 8753 8931
400 8096 8097
WIDTH 1212 HIGH 1392 HIGH
150 8058 8059
300 8057 8060
400 8098 8099
DEPTH WIDTH CODE
339 1200 6533
1600 6537
2000 6541
2400 6545
WIDTH 720 HIGH 900 HIGH
DEPTH WIDTH CODE
316 1200 6312
1600 6316
2000 6320
2400 6324
720 high 900 high
1212 high 1392 high
16mm soffit panel
CHIMNEY HOOD SOFFITS FOR USE WITHOUT CORNICE
NOTE: SUPPLIED READY TO BE CUT TO SIZE ON-SITE NOTE: SOFIT LENGTH 850MM TO SUIT 600 TO 800 WIDE HOOD SPACESNOTE: SOFIT LENGTH 1250MM TO SUIT 900 TO 1200 WIDE HOOD SPACES.
CHIMNEY HOOD SOFFITS FOR USE WITH CORNICE
NOTE: SUPPLIED READY TO BE CUT TO SIZE ON-SITE NOTE: SOFIT LENGTH 850MM TO SUIT 600 TO 800 WIDE HOOD SPACESNOTE: SOFIT LENGTH 1250MM TO SUIT 900 TO 1200 WIDE HOOD SPACES.
DEPTH WIDTH CODE
316 to 416 850 6319
316 to 416 1250 6323
DEPTH WIDTH CODE
DEPTH WIDTH CODE
316 to 416 850 6318
316 to 416 1250 6322
16mm soffit panel with Angled front edges
16mm soffit panel with a curved front edge
MANHATTAN SPECIFIER’S GUIDE 29
STAINLESS STEEL PILASTERS
Manufactured from 50 x 100mm tubing.
VERTICAL BASE PENINSULAR PILASTER DECOR PANEL (Available in all Price Groups)
NOTE: THE STYLE OF THE DECOR PANELS WILL DIFFER ACCORDING TO THE RANGE CHOICES.NOTE: PANEL SIZE: D 600 X W 16
VERTICAL BASE FORWARD PILASTER DECOR PANEL (Available in all Price Groups)
NOTE: THE STYLE OF THE DECOR PANELS WILL DIFFER ACCORDING TO THE RANGE CHOICES.NOTE: PANEL SIZE: D 216 X W 16
VERTICAL BASE PILASTER UNIT DECOR PANEL (Available in all Price Groups)
NOTE: THE STYLE OF THE DECOR PANELS WILL DIFFER ACCORDING TO THE RANGE CHOICES.NOTE: PANEL SIZE: D 568 X W 16
HEIGHT 16mm PANEL 28mm PANEL
900 8023 N/A
HEIGHT 16mm PANEL 28mm PANEL
900 8028 N/A
HEIGHT 16mm PANEL 28mm PANEL
900 8027 N/A
Decor panel style. Decor Panels are Range
Dependent;
They are manufactured from
either MFC panels, Foil Wrapped
panels all with a PVC edge.
Decor panel style. Decor Panels are Range
Dependent;
They are manufactured from
either MFC panels, Foil Wrapped
panels all with a PVC edge.
Decor panel style. Decor Panels are Range
Dependent;
They are manufactured from
either MFC panels, Foil Wrapped
panels all with a PVC edge.
HEIGHT SIZE CODE
870 50X100 FACM232A
720 50X100 FACM233A
900 50X100 FACM234A
MANHATTAN SPECIFIER’S GUIDE30
VERTICAL BASE UNIT DECOR PANEL (Available in all Price Groups)
NOTE: THE STYLE OF THE DECOR PANELS WILL DIFFER ACCORDING TO THE RANGE CHOICES.NOTE: PANEL DEPTH: D 591NOTE: PANEL DEPTH: D 641 TO SUIT 650 DEEP WORKTOPS
VERTICAL BASE INFILL DECOR PANEL (Available in all Price Groups)
NOTE: THE STYLE OF THE DECOR PANELS WILL DIFFER ACCORDING TO THE RANGE CHOICES.NOTE: PANEL DEPTH: D 150
VERTICAL BASE PENINSULAR UNIT DECOR PANEL (Available in all Price Groups)
NOTE: THE STYLE OF THE DECOR PANELS WILL DIFFER ACCORDING TO THE RANGE CHOICES.NOTE: PANEL DEPTH: D 646
VERTICAL HIGHBOARD UNIT DECOR PANEL (Available in all Price Groups)
NOTE: THE STYLE OF THE DECOR PANELS WILL DIFFER ACCORDING TO THE RANGE CHOICES.NOTE: PANEL DEPTH: D 591
VERTICAL TALL UNIT DECOR PANEL (Available in all Price Groups)
NOTE: THE STYLE OF THE DECOR PANELS WILL DIFFER ACCORDING TO THE RANGE CHOICES.NOTE: FOR ‘16MM THICK SELECT’, PANELS FOR 2120MM TALL UNITS ARE PROVIDED 2150MM HIGH, AND FOR 2300MM ARE PROVIDED 2330MM HIGH.NOTE: FOR ‘28MM THICK METRO’ RANGES, PANELS FOR 2120MM TALL UNITS ARE PROVIDED 2179MM HIGH, AND FOR 2300MM ARE PROVIDED 2359MM.NOTE: THE STYLE OF THE DECOR PANELS WILL DIFFER ACCORDING TO THE RANGE CHOICES.NOTE: FOR 16MM THICK SELECT ‘TRADITIONAL RANGES’, PANELS FOR 2120MM TALL UNITS ARE PROVIDED 2120MM HIGH AND FOR 2300MM AREPROVIDED 2300MM HIGH. FOR ALL OTHER SELECT RANGES, PANELS FOR 2120MM TALL UNITS ARE PROVIDED 2120MM HIGH AND FOR 2300MM AREPROVIDED 2300MM HIGH.NOTE: FOR 28MM THICK ‘METRO RANGES’, PANELS FOR 2120MM TALL UNITS ARE PROVIDED 2179MM HIGH, AND FOR 2300MM ARE PROVIDED 2359MM.NOTE: PANEL DEPTHS 641MM ARE PROVIDED FOR 650 SINK RUNS.
HEIGHT DEPTH 16mm PANEL 28mm PANEL
FOR 2120mm 591 8017 8254
TALL UNITS 641 8265 8266
FOR 2300mm 591 8067 8255
TALL UNITS 641 8267 8268
HEIGHT DEPTH 16mm PANEL 28mm PANEL
900 591 8022 8250
641 8263 8264
HEIGHT 16mm PANEL 28mm PANEL
900 8037 8251
HEIGHT 16mm PANEL 28mm PANEL
900 8024 8252
HEIGHT 16mm PANEL 28mm PANEL
1430 8020 8253
Decor panel style. Decor Panels are Range
Dependent;
They are manufactured from
either MFC panels, Foil Wrapped
panels all with a PVC edge.
Decor panel style. Decor Panels are Range
Dependent;
They are manufactured from
either MFC panels, Foil Wrapped
panels all with a PVC edge.
Decor panel style. Decor Panels are Range
Dependent;
They are manufactured from
either MFC panels, Foil Wrapped
panels all with a PVC edge.
Decor panel style. Decor Panels are Range
Dependent;
They are manufactured from
either MFC panels, Foil
Wrapped panels all with a
PVC edge.
Decor panel style. Decor Panels are Range
Dependent;
They are manufactured from
either MFC panels, Foil
Wrapped panels all with a
PVC edge.
MANHATTAN SPECIFIER’S GUIDE 31
VERTICAL WALL UNIT DECOR PANEL - 360mm WALL UNITS (Available in all Price Groups)
NOTE: THE STYLE OF THE DECOR PANELS WILL DIFFER ACCORDING TO THE RANGE CHOICES.NOTE: FOR 16MM THICK SELECT ‘TRADITIONAL RANGES’, PANELS FOR 360MM WALL UNITS ARE PROVIDED 400MM HIGH. FOR ALL OTHER SELECT RANGES, PANELS FOR 360MMWALL UNITS ARE PROVIDED 360MM HIGHNOTE: FOR 28MM THICK ‘METRO RANGES’, PANELS FOR 360MM WALL UNITS ARE PROVIDED 418MM HIGH.NOTE: PANEL DEPTH: D 339
VERTICAL WALL UNIT DECOR PANEL - 720/900mm WALL UNITS (Available in all Price Groups)
NOTE: THE STYLE OF THE DECOR PANELS WILL DIFFER ACCORDING TO THE RANGE CHOICES.NOTE: FOR 16MM THICK SELECT ‘TRADITIONAL RANGES’, PANELS FOR 720MM WALL UNITS ARE PROVIDED 760MM HIGH AND FOR 900MM ARE PROVIDED 940MM HIGH. FOR ALLOTHER SELECT RANGES, PANELS FOR 720MM WALL UNITS ARE PROVIDED 720MM HIGH AND FOR 900MM ARE PROVIDED 900MM HIGHNOTE: FOR 28MM THICK ‘METRO RANGES’, PANELS FOR 720MM WALL UNITS ARE PROVIDED 778MM HIGH, AND FOR 900MM ARE PROVIDED 958MM HIGH.NOTE: PANEL DEPTH: D 339
VERTICAL WALL PENINSULAR UNIT DECOR PANEL - 720/900mm WALL UNITS (Available in all Price Groups)
NOTE: THE STYLE OF THE DECOR PANELS WILL DIFFER ACCORDING TO THE RANGE CHOICES.NOTE: FOR 16MM THICK SELECT ‘TRADITIONAL RANGES’, PANELS FOR 720MM WALL UNITS ARE PROVIDED 760MM HIGH AND FOR 900MM ARE PROVIDED 940MM HIGH. FOR ALLOTHER SELECT RANGES, PANELS FOR 720MM WALL UNITS ARE PROVIDED 720MM HIGH AND FOR 900MM ARE PROVIDED 900MM HIGHNOTE: FOR 28MM THICK ‘METRO RANGES’, PANELS FOR 720MM WALL UNITS ARE PROVIDED 778MM HIGH, AND FOR 900MM ARE PROVIDED 958MM HIGH.NOTE: PANEL DEPTH: D 362
VERTICAL WALL DRESSER UNIT DECOR PANEL (Available in all Price Groups)
NOTE: THE STYLE OF THE DECOR PANELS WILL DIFFER ACCORDING TO THE RANGE CHOICES.NOTE: FOR 16MM THICK SELECT ‘TRADITIONAL RANGES’, PANELS FOR 1212MM DRESSER UNITS ARE PROVIDED 1212MM HIGH AND FOR 1392MM ARE PROVIDED 1392MM HIGH.FOR ALL OTHER SELECT RANGES, PANELS FOR 1212MM DRESSER UNITS ARE PROVIDED 1212MM HIGH AND FOR 1392MM ARE PROVIDED 1392MM HIGHNOTE: FOR 28MM THICK ‘METRO RANGES’, PANELS FOR 1212MM DRESSER UNITS ARE PROVIDED 1241MM HIGH, AND FOR 1392MM ARE PROVIDED 1421MM HIGH.NOTE: PANEL DEPTH: D 339
HEIGHT 16mm PANEL 28mm PANEL
FOR 360mm 8083 8256
WALL UNITS
HEIGHT 16mm PANEL 28mm PANEL
FOR 720mm 8018 8257
WALL UNITS
FOR 900mm 8068 8258
WALL UNITS
HEIGHT 16mm PANEL 28mm PANEL
FOR 720mm 8036 8261
WALL UNITS
FOR 900mm 8076 8262
WALL UNITS
HEIGHT 16mm PANEL 28mm PANEL
FOR 1212mm 8019 8259
DRESSER UNITS
FOR 1392mm 8069 8260
DRESSER UNITS
Decor panel style. Decor Panels are Range
Dependent;
They are manufactured from
either MFC panels, Foil Wrapped
panels all with a PVC edge.
Decor panel style. Decor Panels are Range
Dependent;
They are manufactured from
either MFC panels, Foil Wrapped
panels all with a PVC edge.
Decor panel style. Decor Panels are Range
Dependent;
They are manufactured from
either MFC panels, Foil Wrapped
panels all with a PVC edge.
Decor panel style. Decor Panels are Range
Dependent;
They are manufactured from
either MFC panels, Foil Wrapped
panels all with a PVC edge.
MANHATTAN SPECIFIER’S GUIDE32
DECOR PANEL SELF-ADHESIVE COVER CAPS
Self-Adhesive PVC cover caps:
For use when fitting Decor Panels to units, or to cover
the cam in the Wall Unit bottom panel.
VERTICAL VARIABLE SIZE DECOR PANEL (Available in all Price Groups)
NOTE: MAXIMUM BOARD SIZE = 2300 X 1200MM, WITH THE GRAIN FOLLOWING THE LONGEST LENGTH.NOTE: LENGTH, HEIGHT AND GRAIN DIRECTION MUST BE SPECIFIED WHEN ORDERING.
HORIZONTAL VARIABLE SIZE FRAMING PANEL (Available in all Price Groups)
NOTE: MAXIMUM BOARD SIZE = 2300 X 1200MM, WITH THE GRAIN FOLLOWING THE LONGEST LENGTH.NOTE: LENGTH, HEIGHT AND GRAIN DIRECTION MUST BE SPECIFIED WHEN ORDERING.
HEIGHT 16mm PANEL 28mm PANEL
VARIABLE 9021 8298
COLOUR CODE
COLOUR CODE
WHITE PLAS267A
VANILLA PLAS265A
ALUMINIUM PLAS270A
GREY
OAK PLAS269A
BEECH PLAS266A
MAPLE PLAS262A
NATURAL AIDIA PLAS268A
WALNUT
FERRARA OAK PLAS261A
Decor panel style. Decor Panels are Range
Dependent;
They are manufactured from
either MFC panels, Foil
Wrapped panels all with a
PVC edge.
Decor panel style. Decor Panels are Range
Dependent;
They are manufactured from
either MFC panels, Foil Wrapped
panels all with a PVC edge.
DEPTH LENGTH 16mm PANEL 28mm PANEL
VARIABLE VARIABLE 8066 8299
339 600 8281 8231
800 8282 8232
1000 8283 8233
1200 8284 8234
1610 8285 8235
1810 8286 8236
2310 8287 8237
641 600 8291 8241
800 8292 8242
1000 8293 8243
1200 8294 8244
1610 8295 8245
1810 8296 8246
2310 8297 8247
PROTECTION PACKS
NOTE: IDEALLY TO BE FITTED EITHER SIDE F
CODES
6900 PROTECTION PACK
12 METRES OF BUBBLE WRAP 750 WIDE
12 METRES OF CORRUGATED CARDBOARD
2 POLY BAGS
6901 PROTECTION PACK
12 METRES OF BUBBLE WRAP 750 WIDE
12 METRES OF CORRUGATED CARDBOARD
20 LENGTHS OF PROPLEX / CORREX 600 X 1200 X 2mm
10 LENGTHS OF NOMAFOAM U-CHANNEL
2 POLY BAGS
6902 PROTECTION PACK
12 METRES OF BUBBLE WRAP 750 WIDE
20 LENGTHS OF PROPLEX / CORREX 600 X 1200 X 2mm
10 LENGTHS OF NOMAFOAM U-CHANNEL
2 POLY BAGS
MANHATTAN SPECIFIER’S GUIDE 33
enable
enable:
inclusively designed accessible kitchens: we believe it is the first range of its kind to equally meet the needs of house builders, housingassociations and end users.
Why enable?......because it means: ‘to make something possible’ or ‘ to provide somebody with the resources, authority or the opportunity to dosomething’.
enable offers you flexible height cupboards; internal storage systems for added functionality; multi hole brackets allowing simpleworktop level adjustment; internal cupboard/drawer lighting for the visually impaired. enable offers you accessible kitchens to meet allyour needs. The Manhattan enable range is the result of a consolidated research and development programme carried out by our productdevelopment team in West Sussex. Our research showed that kitchens designed for optimum accessibility should:
l offer a wide rang of choice, accommodating the design philosophy adopted in standard kitchen ranges;
l give a high degree of flexibility, ensuring the physical needs of different users are catered for equally;
l have excellent functionality, without sacrificing style;
l meet the specified standards for special needs users.
MANHATTAN SPECIFIER’S GUIDE34
ENABLE: INTRODUCTION
Welcome to Manhattan’s enable range of units, our most comprehensive to date.This new range of units will be able to offer you plenty of exciting solutions when planning your kitchens. And remember, this is just theselection of ‘specialist’ units, everything you have seen so far in this comprehensive Specifier’s Guide can be used in your kitchens.
enable:
inclusively designed accessible kitchens
ENABLE: BASE DRAWER UNIT WITH ‘METAL-SIDED’ THREE-QUARTER OPENING DRAWER
Single drawer unit
Carcase height 145mm
450mm deep drawer, finished in white
1 X Drawer front, height 140mm
ENABLE: BASE UNITS - REDUCED HEIGHT
With full-height door Carcase height 575mm
Door height 570mm
With full-height door Carcase height 575mm
Door height 570mm
WIDTH 568 DEEP
300 Lt Hd 2151
Rt Hd 2152
400 Lt Hd 2153
Rt Hd 2154
500 Lt Hd 4911
Rt Hd 4912
600 Lt Hd 4913
Rt Hd 4914
800 4918
1000 4920
WIDTH 568 DEEP
WIDTH CODE
400 2170
500 2171
600 2172
ENABLE: BASE DRAWER UNITS WITH ‘METAL-SIDED’ DRAWERS (CONTINUED)
Three drawer unit - comprising two drawers and one high-sided drawer
Carcase height 575mm
450mm deep drawer, finished in white
2 X Drawer fronts, height 140mm
1 X Deep drawer fronts, height 283mm
Four drawer unit - comprising four drawers
Carcase height 575mm
450mm deep drawer, finished in white
4 X Drawer fronts, height 140mm
WIDTH CODE
500 2175
600 2176
300 2177
400 2178
500 2179
600 2180
ENABLE: BASE DRAWER UNIT WITH PULL-OUT TABLE SURFACE AND ‘METAL-SIDED’ DRAWERS
Three drawer unit - top drawer as pull-out tambour table/surface
Carcase height 575mm
450mm deep drawer, finished in white
1 X Pull-out drawer front with table, height 140mm
1 X Drawer front, height 140mm
1 X Deep drawer front, height 283mm
WIDTH CODE
600 2181
MANHATTAN SPECIFIER’S GUIDE 35
ENABLE: KITCHEN ACCESSORY - CORNER UNIT BLANKING PANEL
Base corner unit blanking panel
NOTE: WHEN USING THE BLANKING PANEL, REMEMBER TO REMOVE THE S-FRAME AND FILLET TO ENSURE THAT THE KITCHEN IS PLANNED ON A 600MM CORNER MODULE.NOTE: PANEL TO BE CUT-ON-SITE TO SUIT BASE CORNER UNIT ADJUSTMENT.NOTE: REGARDLESS OF DOOR COLOUR, THIS PANEL WILL BE MANUFACTURED TO SUIT THE CARCASE COLOUR OF THE UNITS ORDERED.
ENABLE: KITCHEN ACCESSORY - PELMET
Worktop blanking pelmet
NOTE: TO BE SPECIFIED WHERE A RUN OF WORKTOP IS BEING USED TO ALLOW DISABLED ACCESS TO SINK OR HOB AREA. THE PELMET WILL ALLOW THE WORKTOP SUPPORTBRACKETS TO BE HIDDEN FROM THE VIEW OF THE USER.
WIDTH 568 DEEP
SIZE CODE
678 X 570 6196
678 X 715 6197
WIDTH LENGTH CODE
140 MAX 2300 6195
ENABLE: BASE CORNER UNITS - REDUCED HEIGHT
With full-height door Carcase height 575mm
Door height 570mm
*
NOTE: MIN & MAX POSITIONS FROM THE WALL WITH THE FRONT STRIP SET IN THE VERTICAL POSITION RESULTING IN 636MM FROM THE OPPOSING WALL. BASEDRAWER UNIT - RED
WIDTH CODE
600 Lt Hd 2185
(min 336-378) Rt Hd 2186
800 Lt Hd 2187
(min 236-278) Rt Hd 2188
1000 Lt Hd 2189
(min 136-178) Rt Hd 2190
*800 Lt Hd 2191
(min 336-378) Rt Hd 2192
*1000 Lt Hd 2193
(min 236-278) Rt Hd 2194
600mm WIDE UNIT
(300mm Wide door)
800mm WIDE UNIT
(400mm Wide door)
1000mm WIDE UNIT
(500mm Wide door)
*800mm WIDE UNIT
(500mm Wide door)
*1000mm WIDE UNIT
(600mm Wide door)
ENABLE: KITCHEN ACCESSORY - HALF CIRCLE, FULL EXTENSION CAROUSELS
Carousels for use in corner units
NOTE: CAROUSEL TRAYS SUPPLIED AS A SINGLE ITEM, IT IS RECOMMENDED THAT YOU SUPPLY TWO CAROUSELS PER BASE CORNER UNIT.NOTE: CAROUSEL TRAYS WILL ONLY SUIT 1000MM BASE CORNER UNITS, WITH A DOOR SIZE OF 500MM.
SIZE CODE
000 X 000 MECH100A
MANHATTAN SPECIFIER’S GUIDE36
ENABLE: HIGHBOARD HOUSING UNITS - 1400MM HIGH
To suit an integrated single oven
Unit height 1400mm
Carcase height 1250mm
Open shelf, variable depending on oven size
Aperture 650mm
Bottom pan drawer height 355mm
To suit an integrated double oven
Unit height 1400mm
Carcase height 1250mm
Infill panel to suit (fitted at top of unit)
Aperture 889mm
Bottom pan drawer height 283mm
To suit an integrated refrigerator or freezer
Unit height 1400mm
Carcase height 1250mm
Aperture 889mm
Door height 895mm
Infill panel 57mm
Bottom pan drawer height 283mm
(Any infill to be fitted internally behind door)
WIDTH 568 DEEP
600 2950
600 4805
600 Lt Hd 4813
Rt Hd 4814
ENABLE: MOBILE TROLLEY UNIT
Mobile trolley unit with cutlery drawer and locking castor’s
CODE
CODEH HEIGHT CODE
2150
MANHATTAN SPECIFIER’S GUIDE 37
ENABLE: TALL HOUSING UNITS
To suit a single oven
Unit height 2120mm
Carcase height 1970mm
Top, lift-up door 355mm
Open shelf, variable depending on oven size
Aperture 650mm
Bottom pan drawer height 355mm
To suit a single oven and microwave
Unit height 2120mm
Carcase height 1970mm
Top, lift-up door 355mm
Infill panel to suit
Top aperture 450mm
Bottom aperture 650mm
Bottom pan drawer height 355mm
To suit a double oven
Unit height 2120mm
Carcase height 1970mm
Top, lift-up door 355mm
Open shelf, variable depending on oven size
Aperture 884mm
Bottom pan drawer height 355mm
To suit an integrated refrigerator or freezer
Unit height 2120mm
Carcase height 1970mm
Top, lift-up door 355mm
Open shelf 335mm
Door height 895mm
Bottom pan drawer height 283mm
(Any infill to be fitted internally behind door)
WIDTH 568 DEEP
600 3750
600 3751
600 3752
600 Lt Hd 3753
Rt Hd 3754
MANHATTAN SPECIFIER’S GUIDE38
ENABLE: TALL HOUSING UNITS with UPGRADED TOP DOOR STAY
To suit a single oven
Unit height 2120mm
Carcase height 1970mm
Top, lift-up door 355mm
Open shelf, variable depending on oven size
Aperture 650mm
Bottom pan drawer height 355mm
To suit a single oven and microwave
Unit height 2120mm
Carcase height 1970mm
Top, lift-up door 355mm
Infill panel to suit
Top aperture 450mm
Bottom aperture 650mm
Bottom pan drawer height 355mm
To suit a double oven
Unit height 2120mm
Carcase height 1970mm
Top, lift-up door 355mm
Open shelf, variable depending on oven size
Aperture 884mm
Bottom pan drawer height 355mm
To suit an integrated refrigerator or freezer
Unit height 2120mm
Carcase height 1970mm
Top, lift-up door 355mm
Open shelf 335mm
Door height 895mm
Bottom pan drawer height 283mm
(Any infill to be fitted internally behind door)
WIDTH 568 DEEP
600 3760
600 3761
600 3762
600 Lt Hd 3763
Rt Hd 3764
MANHATTAN SPECIFIER’S GUIDE 39
ENABLE: WALL UNIT
With full-height door
With full-height doors
WIDTH 720 HIGH
300 Lt Hd 8523
Rt Hd 8524
400 Lt Hd 8525
Rt Hd 8526
450 Lt Hd 8527
Rt Hd 8528
500 Lt Hd 8529
Rt Hd 8530
600 Lt Hd 8531
Rt Hd 8532
800 8533
900 8534
1000 8535
720 high
720 high
MANHATTAN SPECIFIER’S GUIDE40
ENABLE: KITCHEN ACCESSORY - WORKTOP SUPPORT ARM
Support arm for use under a span of worktop, with no units under
NOTE: SUPPLY TWO BRACKETS FOR WORKTOP SPANS UP TO 600MM WIDE, AND THREE BRACKETS FOR WORKTOP SPANS OVER 1200MM WIDE.NOTE: MINIMUM WORKTOP HEIGHT OF 695MM (TO UNDERSIDE); BRACKET ADJUSTABLE IN HEIGHT IN 25MM INCREMENTS TO MAXIMUM OF 870MM (TO UNDERSIDE).
ENABLE: KITCHEN ACCESSORY - BASE UNIT SUPPORT ARM
Support arm for use under enable base units, with worktop over
NOTE: SUPPLY TWO BRACKETS FOR UNITS UP TO 600MM WIDE, AND THREE BRACKETS FOR UNITS 800MM AND OVER.NOTE: MINIMUM WORKTOP HEIGHT OF 745MM (TO UNDERSIDE); BRACKET ADJUSTABLE IN HEIGHT IN 25MM INCREMENTS TO MAXIMUM OF 1070MM (TO UNDERSIDE).
ENABLE: KITCHEN ACCESSORY - ‘POWER LIFT’ WORKTOP MECHANISM
Electronic worktop movement mechanism, used for manoeuvring sink/hob surfaces
NOTE: WHEN BASE UNITS ARE FITTED AT A LOWER HEIGHT NEXT TO A POWERED LIFT, AN ‘ANTI-ENTRAPMENT’ SENSOR SWITCH MUST BE FITTED TO THE UNDERSIDE OF THEWORKTOP’S METAL SUPPORT FRAME.NOTE: WORKTOPS FITTED NEXT TO THE POWER LIFT MUST FINISH FLUSH WITH THE UNIT END PANEL OR FLY END PANEL.NOTE: TO REACH ANY ADJACENT BASE UNITS, THE LENGTH OF CABLES/WIRES WILL NEED TO HAVE THE LENGTH SPECIFIED.NOTE: REMEMBER TO SPECIFY THE ‘ANTI-ENTRAPMENT STRIP MECH071A - (SEE RIGHT)
SIZE CODE
500 X 410 MECH101A
SIZE CODE
500 X 410 MECH102A
SIZE CODE
1000 X 600 MECH069A
ANTI-ENTRAPMENT STRIP CODE
MECH071A
WORKTOP
PELMET
GUIDE RAILPOWER LIFT
ELECTRONIC CONTROL
POWER
SWITCH
TRANSFORMER
MOTOR
WALL FIXINGBRACKET
WALL FIXING BRACKET& SUPPORT ARM
WALL
FLOOR LEVEL
WORKTOP WALL FIXING BRACKET& SUPPORT ARM
WALL
FLOOR LEVEL
WORKTOP
WALL FIXING BRACKET& SUPPORT ARM
WALL
UNIT
UNIT
FLOOR LEVEL
WORKTOP
WALL FIXING BRACKET& SUPPORT ARM
WALL
FLOOR LEVEL
WORKTOP
MANHATTAN SPECIFIER’S GUIDE 41
ACCESSORIES
MANHATTAN SPECIFIER’S GUIDE42
CODE
*White
FACM060A
**Silver
FACM082B
**Gold
FACM083A
**White
FACM084A
CORNICEStyle, material and finish specific to individual range.
Style, material and finish specific to
individual range.
Range M11 & R07 only
CODE
2.3 meters
6061
LIGHT FASCIA
Style, material and finish specific to
individual range.
Range M11 & R07 only
CODE
2.3 meters
6065
BREAKFAST BAR LEGS - 895MM HIGH
895mm x 25mm diameter chrome
plated steel tube with sockets.
CODE
Chrome
LEGS036A
BREAKFAST BAR LEGS - 870MM HIGH
870mm x 60mm diameter, adjustable
height leg.
CODE
White
LEGS032A
S/Steel
LEGS035A
Oak
LEGS031A
CONTINUOUS PLINTH - 150MM HIGH
Colour specific to individual
range, supplied in 2.5m lengths
Optional extra,
manufactured from MFC, supplied in
2.5m lengths
Optional extra,
manufactured from MFC,supplied in
2.5m lengths
CODE
Range
specific
6094
Aluminium
effect
6083
White High
Gloss
6087
RETURN PLINTH - 175MM HIGH
Colour specific to individual
range.
Optional extra,
manufactured from MFC.
Optional extra,
manufactured from MFC.
CODE
Range
specific
6095
Aluminium
effect
6085
White High
Gloss
6088
BREAKFAST BAR LEGS - 710MM HIGH
710mm x 60mm diameter, adjustable
height leg.
CODE
White
LEGS030A
S/Steel
LEGS034A
Oak
LEGS033A
STAINLESS STEEL PILASTERS
Manufactured from 50 x 100mm
tubing.
CODE
870mm
FACM232A
720mm
FACM233A
900mm
FACM234A
PLINTH SEALER
Transparent plastic extrusion which
clips to the bottom edge of the plinth.
The flexible lip then seals the gap
between the floor and the plinth.
NOTE: SUPPLIED IN 3M LENGTHS, CUT ON SITE TO SUITREQUIREMENTS.
CODE
PLAS250A
HALF SWING-OUT WIRE BASKETS
For use in a base corner units 2663/64
2627/28 & 2189/90 only.
NOTE: SUPPLIED AS A PAIR.
CODE
MECH001A
8 mm THICK WORKTOP UPSTANDS
For positioning directly above the worktop
The size 100mm high x 3000mm MAX long
CODE
9199
DECOR PANEL SELF-ADHESIVE COVER CAPS
WHITE
VANILLA
ALUMINIUM GREY
OAK
BEECH
MAPLE
NATURAL AIDIA WALNUT
FERRARA OAK
CODE
PLAS267A
PLAS265A
PLAS270A
PLAS269A
PLAS266A
PLAS262A
PLAS268A
PLAS261A
PLINTH AND WORKTOP VENTILATION GRILLS
To be fitted into a housing unit plinth or
fitted into a worktop over a highboard
housing unit.
NOTE: * MANUFACTURED FROM PLASTIC.
NOTE: ** MANUFACTURED FROM ALUMINIUM, AND THENSPRAYED THE APPROPRIATE COLOUR.
MANHATTAN SPECIFIER’S GUIDE 43
CODE
175 deg
HINGE OPTION TWO
DOUBLE POSTFORMED WORKTOPS
NOTE: 3.6M MAXIMUM LENGTH
38MM
Depth
670mm.
9088
Depth
900mm.
9089
2MM ACRYLIC EDGED WORKTOPS
2mm Acrylic edged laminate worktop,
acrylic edging available in:
- Aluminium Wave
- Beech multiplex
- Beech/Steel multiplex
- Walnut/Steel multiplex
- Planked Cherry
NOTE: 3.6M MAXIMUM LENGTH
CODE
Depth up
to 850mm.
9120
SQUARE EDGED WORKTOPS
38mm Square edged laminate worktop
NOTE: 3.0M MAXIMUM LENGTH
CODE
Depth up
to 850mm.
9061
HINGE OPTION THREE CODE
107 deg
WORKTOP CONNECTOR BOLTS
Each joint consists of a three butterfly
bolts to be recessed into the worktop
CODE
FACM009A
CABLE MANAGMENT FOR LIGHTING - SELF ADHESIVE BASE
To be used in conjunction with cable ties
.
CODE
FITT091A
HINGE OPTION FOUR CODE
107 deg
Soft Close
HINGE OPTION FIVE CODE
175 deg
Soft Close
CABLE MANAGMENT FOR LIGHTING - CABLE TIE
To be used in conjunction with Self-
Adhesive bases
.
CODE
FITT090A
SOFT CLOSING DOORS - UPGRAGE OPTIONAvailable with to suit
Available with to suit all base, wall, highboard and tall units as
an optional upgrade
NOTE: NOT SUITABLE FOR BI-FOLD WALL UNITS OR WITH 170 DEGREE HINGES
CODE
HING064A
TIMBER BATTENS
50 x 50 x 2400mm timber batten for
supporting 650mm deep of Granite
worktops.
20 x 50 x 2400mm timber batten for
supporting worktops over appliance
spaces, soffit panels or infill panels.
CODE
50x50x2400
TIMB020A
20x50x2400
TIMB021A
SINGLE POSTFORMED WORKTOPS
38mm & 60mm Single postformed laminate worktop
NOTE: 3.6M MAXIMUM LENGTH
38MM
Depth up
to 600mm.
9086
Depth 601-
850mm.
9087
SOFT CLOSING DRAWERS - UPGRAGE OPTION
DRAWER UNITS WITH TWIN-WALLED, FULL EXTENSION
Available as un upgrade option to all base and tall units
NOTE: THIS COMES AS STANDARD ON THE FULL EXTENSION DRAWERS DETAILED ABOVE
CODE
MECH126A
BATHROOMSPECIFIER’S GUIDEJUNE 2009
By appointment to Her Majesty The Queen
Manufacturers and Installers ofKitchen and Bathroom Furniture
Manhattan Furniture West Sussex
MANHATTAN SPECIFIER’S GUIDE46
87
6m
m
57
6m
m
19
74
mm
20
28
mm
84
5m
m
30
0m
m
53
8m
m
38
mm
57
6m
m
87
6m
m
57
6m
m
84
5m
m
19
74
mm
20
28
mm
30
0m
m
11
52
mm
GENERAL DIMENSIONS (F0R 575mm HIGH WALL UNITS WITH 876mm BASE UNITS & 1974mm TALL UNITS
CODING GUIDELINES
Most single door cabinets have left or right hand opening doors and it is therefore essential to quote the correct type when ordering. A door with hinges to the left
hand side as you are facing the cabinet is a left hand unit, a door with the hinges to the right hand side is a right hand unit.
If an open end display unit is specified on the right hand end of a run of base or wall units, please specify a right hand unit. Likewise, if it is specified on the left at the
end of a run of base or wall units, please specify a left hand unit.
Similarly, all base and base sink corner cabinets can be left or right handed. If the blanking panel is to the left when facing the cabinet, please specify a left hand
model; if the blanking panel is to the right, please specify a right hand unit.
Base sink cabinets can also be left or right handed. If the draining board is to be fitted to the left of the unit, please specify a left hand model; if the draining board is
to be fitted to the right, please specify a right hand model.
Height = from top to bottom Width = from left to right Depth = from back to front
SIDE ELEVATION of WALL AND BASE UNITS SIDE ELEVATION OF BASE WITH TALL UNIT ADDED
TO THE TOP OF THE BASE UNIT
LH WALL UNIT DOOR RH WALL UNIT DOOR
LH BASE UNIT DOOR RH BASE UNIT DOOR
LH BASE UNIT DOOR RH BASE UNIT DOOR
LH WALL UNIT DOOR RH WALL UNIT DOOR
MANHATTAN SPECIFIER’S GUIDE 47
SINGLE DOOR CORNER BASE UNIT
THREE DRAWER BASE UNIT
DEPTH WIDTH CODE
280 600 LH 3351
280 600 RH 3352
DEPTH WIDTH CODE
280 300 3361
280 400 3362
WIDTH 300 DEEP
Door height 572mm
Minimum start point from the corner 25mm
Maximum start point from the corner 225mm
The width of unit with S’Frame =
With front strip set in the vertical position 345mm
With the front strip set in the horizontal position 314mm
Height of drawer fronts 188mm
OPEN SHELF BASE UNITS
SINGLE DOOR BASE UNIT
DOUBLE DOOR BASE UNIT
OPEN SHELF BASE CORNER UNIT
DEPTH WIDTH CODE
280 150 3339
280 300 3340
WIDTH CODE
DEPTH WIDTH 568 DEEP
280 300 LH 3341
280 300 RH 3342
280 400 LH 3343
280 400 RH 3344
DEPTH WIDTH CODE
280 600 3345
280 800 3346
WIDTH 568 DEEP
DEPTH WIDTH CODE
280 600 LH 3347
280 600 RH 3348
WIDTH 280 DEEP
MATERIAL CODE
Minimum start point from the corner 25mm
Maximum start point from the corner 225mm
The width of unit with S’Frame =
With front strip set in the vertical position 345mm
With the front strip set in the horizontal position 314mm
Door height 572mm
Door height 572mm
MANHATTAN SPECIFIER’S GUIDE48
COMBINED BIDET AND WC BASE UNIT
VANITY SINK BASE UNIT
DEPTH WIDTH CODE
280 1200 LH 3375
280 1200 RH 3376
280 1600 LH 3377
280 1600 RH 3378
DEPTH WIDTH CODE
529 600 3379
529 800 3380
WIDTH 300 D
Bidet bottom panel height 188mm
WC panel: The removable top panel height 380mm
Bottom fixed panel height 188mm
Note: The 1200mm wide wc unit has been designed to be
fitted with a bottom supply and overflow type Cistern, this
will need to be specified.
Door height 572mm
BASE SINK UNITS
BASE WC UNITS
BASE BIDET UNIT WITH OPEN SHELF
COMBINED WC AND SINK BASE UNIT
DEPTH WIDTH CODE
280 600 3363
280 800 3364
DEPTH WIDTH CODE
DEPTH WIDTH 568 DEEP
280 600 3365
280 800 3366
DEPTH WIDTH CODE
280 600 3367
280 800 3368
DEPTH WIDTH CODE
280 1200 LH 3371
280 1200 RH 3372
280 1600 LH 3373
280 1600 RH 3374
MATERIAL CODE
Sink panel height 188mm
Door height 380mm
Removable top panel height 380mm
Bottom fixed panel height 188mm
Note: The 600mm wide wc unit has been designed to be fitted
with a bottom supply and overflow type Cistern, this will need to
be specified.
Bottom fixed panel height 188mm
Note: Access to the plumbing is by removing the shelf.
Sink panel height 188mm
Door height 380mm
WC panel: The removable top panel height 380mm
Bottom fixed panel height 188mm
Note: The 1200mm wide wc unit has been designed to be
fitted with a bottom supply and overflow type Cistern, this will
need to be specified.
MANHATTAN SPECIFIER’S GUIDE 49
BASE CORNER POST
BASE CORNER FILLET
DEPTH WIDTH CODE
65 65 6250
HEIGHT CODE
576 6268
32mm BATH BULKHEAD
BATH BULKHEAD INFILL & DECOR PANEL KIT
BASE INFILL PANEL
BASE DECOR PANEL
DEPTH WIDTH CODE
301 to 303 32 8204
WIDTH 280 DEEP
DEPTH WIDTH CODE
301 to 303 66 min 150 max 8205
DEPTH WIDTH CODE
16 to 18 150 8206
16 to 18 300 8207
DEPTH WIDTH CODE
301 to 303 16 8208
This bulkhead fits between the side of the bath and the adjacent
base unit.
The bulkhead is 876mm high and fits between the floor and the
under side of the worktop.
Note: check that the bath panel will not protrude further than
the bulkhead, if so then an 8205 should be specified
This bulkhead fits between the side of the bath and the
adjacent base unit.
The bulkhead is 876mm high and fits between the floor and the
under side of the worktop.
Note: this bulkhead is adjustable by reducing the width of the
front infill panel, this can be cut down on site by a fitter
Height 576mm
Note: to be fixed in-line with the front edge of the
carcase
Height 576mm
Height 576mm
Height 576mm
Note: for use when a base unit is set
against a 45 degree false wall
MANHATTAN SPECIFIER’S GUIDE50
BASE UNIT PEDESTAL INFILL
BASE UNIT ADJUSTABLE LEG
DEPTH WIDTH CODE
32 to 38 400 8209
HEIGHT CODE
300 6800
BASE UNIT PLINTH
BASE UNIT PLINTH RETURN
VANITY PLINTH RETURN
PLINTH SEAL
DEPTH WIDTH CODE
16 1200 long 6251
16 2400 long 6252
DEPTH WIDTH CODE
16 275 6269
DEPTH WIDTH CODE
16 524 6270
DEPTH WIDTH CODE
16 3000 long 8145
Note: depending on the range this infill can be 32 to 38mm deep x 400mm wide x 300mm high.
Note: Order two legs per unit for unit width 150mm300mm400mm600mm800mmOrder three legs per unit for unit width 1200mm1600mm
Note: Plinth seal made from transparent uPVC
MANHATTAN SPECIFIER’S GUIDE 51
DEPTH WIDTH CODE
16 to 18 201-203 8203
OPEN SHELF WALL UNIT
SINGLE DOOR WALL UNIT
DOUBLEDOOR WALL UNIT
WALL UNIT INFILL PANEL
DEPTH WIDTH CODE
180 150 3221
180 300 3222
DEPTH WIDTH CODE
180 300 3223
180 300 3224
180 400 3225
180 400 3226
DEPTH WIDTH CODE
180 600 3227
180 800 3228
DEPTH WIDTH CODE
16 to 18 150 8201
16 to 18 300 8202
MANHATTAN SPECIFIER’S GUIDE52
DEPTH WIDTH CODE
280 300 3415
280 300 3416
280 400 3417
280 400 3418
MATERIAL CODE
DEPTH WIDTH CODE
280 300 3411
280 300 3412
280 400 3413
280 400 3414
DEPTH WIDTH CODE
16 to 18 150 8212
16 to 18 300 8213
WIDTH CODE
16 301 to 303 8214
Door height 1148mm
Door height 572mm
Height 1728mmNote: to be fixed adjacent to the baseand tall unit and inline with the frontedge of the carcase
Height 2028mmNote: This has been designed to fit onthe end of a run of tall units betweenthe floor and the top of the tall unit
TALL UNIT WITH FULL LENGTH DOOR
TALL UNIT WITH SHORT DOOR AND OPEN SHELF
TALL UNIT INFILL
TALL UNIT DECOR PANEL
DETAIL SHOWING HOW THE TALL UNIT WORKS WITH BASE UNITS , INFILLS & DECOR PANELS
Tall unit
Base unit
Plinth
Combined units making
the Tall unit
Decor
panel
Plinth
Infill
panel
Combined tall
units
MANHATTAN SPECIFIER’S GUIDE 53
LENGTH CODE
Cornice 1500 6253
Cornice 3000 6254
Light Fascia 1500 6255
Light Fascia 3000 6256
FRONT BATH PANEL
SIDE BATH PANEL
WALL UNIT SOFFIT PANEL
38mm POSTFORMED LAMINATE WORKTOP
Note: Front bath panel kit includes:
Front bath panel
Plinth
Side infill supports, Two per kit
Screw pack.
Note: Side bath panel kit includes:
Side bath panel
Plinth
Side infill supports, One per kit
Corner post, One per kit
Panel location battens, Three per kit
Screw pack.
CORNICE AND LIGHT FASCIA
SIZE CODE
Size to be specified 8210
SIZE CODE
Size to be specified 8211
DEPTH WIDTH CODE
180 800 6257
180 1200 6258
180 1600 6259
180 2000 6260
DEPTH LENGTH CODE
305 3600 9027
Note: The standard depth of
bathroom
worktop is 305mm with the depth of
the Vanity sink worktop set at
554mm deep.
MANHATTAN SPECIFIER’S GUIDE54 MANHATTAN SPECIFIER’S GUIDE54
DETAIL SHOWING A 32mm BATH BULKHEAD FITTED ADJACENT TO A BATH
DETAIL SHOWING A BATH BULKHEAD INFILL & DECOR PANEL KIT FITTED ADJACENT TO A BATH
CALCULATING THE WORKTOP ADJACENT TO A WC INSPECTION FLAP
To calculate the worktop adjacent to the 600mm wide WC
unit inspection flap.
Take the unit length of 300mm.
Add 6mm for the over hang.
Add 52mm overhang to continue the worktop over the WC
unit so that it meets with the inspection flap.
Length of worktop 358mm
To calculate the worktop adjacent to the 800mm wide WC
unit inspection flap.
Take the unit length of 300mm.
Add 6mm for the over hang.
Add 132mm overhang to continue the worktop over the
WC unit so that it meets with the inspection flap.
Length of worktop 438mm
Note: To support the flap and prevent misalignment the WC unit will be supplied 25mm
dia support discs to be attached to the underside worktops adjacent to the flap.
32mm bath bulkhead 8214
fitted adjacent to a sink unit and
bath
32mm bath bulkhead 8214
fitted adjacent to a WC unit and
bath
Bath bulkhead & infill 8205
fitted adjacent to a sink unit
and bath
Detail showing the parts that make up the
bath bulkhead & infill kit 8205
SPECIFIER’S GUIDEJUNE 2009
MANHATTAN FURNITUREBLENHEIM ROADLANCING BUSINESS PARKLANCINGWEST SUSSEXBN15 8UH
TEL:FAX:EMAIL:WEB:
01903 52430001903 [email protected]