Embed Size (px)
Citation preview
Schrader is a brand of Sensata Technologies
USER MANUAL
The EZ-sensor PAD is intended to:
• Diagnose all TPMS original equipment (OE) sensors
• Diagnose Schrader EZ-Sensor (#33500 and #33700)
• Program a blank EZ-Sensor to the specific Make, Model, and Year required (MMY)
EZ-sensor PAD can be used as a desktop programming pad or a hand-held device as an extension of a mobile smartphone.
Read this user manual in its entirety before using the device for the first time and follow its instructions.
Pad®
Trigger Button
Status LED Panel
Power LED Panel
Power Button
Programming Icon
Programming Icon
Registering and Establishing Internet Connection
Before using the EZ-sensor PAD, go to www.ez-sensor.com/pad to complete your registration. If already a user, use your current login credentials to start using the EZ-sensor PAD.
The EZ-sensor PAD is controlled using an application installed either on a computer or on an iOS or Android device through the “Schrader TPMS” application. Bluetooth capability is required for smartphones and tablets.
To download the “Schrader TPMS” application, go to www.ez-sensor.com/pad or use your mobile device to scan the QR-Code:
If required, the Bluetooth PIN is ‘0000’. The EZ-sensor PAD serial number can be found on a label located underneath the silicon rubber case on the back of the pad. The final 4 digits will also identify the device in your Bluetooth device list.
Included in the Box
• EZ-sensor PAD Part-Number: #27028• USB Cable• User Manual
Intended Use
Schrader is a brand of Sensata Technologies
Understanding LED Indicators
Power LED Panel
The Power LED indicates if the tool is ON and the charging status
• Solid Red – PAD is charging • Solid Green – PAD is fully charged • Flashing Red – PAD battery is low, charging is required• Flashing Green – PAD battery is partially charged
Status LED
The Status LED indicates whether the diagnosis or programming functions are in progress, have failed or have been successfully completed.
• Solid Red – Diagnosis or programming error • Solid Green – Diagnosis or programming is successful• Flashing Green – Diagnosis or programming in progress
To use the EZ-sensor PAD1. Press and hold the power button for 2 seconds to turn the device ON2. Open the “Schrader TPMS” application3. Select Diagnose or Program4. Select Make, Model and Year of vehicle being serviced
To program an EZ-sensor:1. Place EZ-sensor in front of or on top of EZ-sensor PAD2. Select Generate Random ID3. Click Use ID4. Click Program Sensor
• Blue loading screen will appear on the application and green lights will flash on the pad
• First “beep” confirms the EZ-sensor has been programmed successfully
• Second “beep” confirms the EZ-sensor has been tested successfully
To diagnose a TPMS sensor:1. Place sensor in front of or on top of EZ-sensor PAD2. Click Diagnose Sensor
• Blue loading screen will appear on the application and green lights will flash on the pad• A “beep” confirms that the diagnosis was completed successfully• Diagnosis information will be displayed on the application
Using the EZ-sensor PAD
OR
Sensor Placement
Schrader is a brand of Sensata Technologies
RF Positioning
The EZ-sensor Pad was designed to be used as a desktop tool.
1. When the device is laid flat, place the sensor on top of the programming icon
2. Proceed with diagnosis/programming
Method 1:
Method 2:
1. Place the sensor in front of the EZ-sensor PAD as shown below. The RF transmission is emitted by the EZ-sensor PAD from the area near this symbol:
2. Proceed with diagnosis/programming
Battery Type Li-ion/ Li-polymerTypical Charging Time 2 Hours
Battery Life (Full Charge) Approx. 120 EZ-sensor Programming Operations
Tool Overview
Battery Information
Mechanical Characteristics
Operating temperature 0 - 45°Storage temperature -10 - 55°CSilicon size 1.2 x 7.4 x 2.6 cmConnector Micro-USB Type B
Schrader is a brand of Sensata Technologies
USB Interface
The EZ-sensor Pad is comes with a USB connector that can be used for charging or controlling the tool. Most computers have a USB interface.
The USB interface follows an international standard and is compliant with the USB 1.1 specification. To check if your computer is compatible with this device, refer to the computer owner’s manual. The USB connector is intended to be used only with a computer. This should not be connected to smartphones, tablets, etc.
Bluetooth
In addition to the USB connector, the EZ-sensor PAD can be controlled using a Bluetooth connection on an iOS or Android device.
The Bluetooth interface is compliant with international standards. This device operates at Bluetooth class 1.5 and is approved by expert agencies.
The PIN used to pair your Bluetooth device with the EZ-sensor PAD is “0000”.
Electronic tools and used batteries should be disposed of in an environmentally friendly manner.
Do not expose the battery to fire or high temperatures. This device is not waterproof.
The EZ-sensor PAD must be handled with care. The warranty is offered in accordance with national regulation from the date of purchase (invoice or delivery date). Any operation not included in this manual can damage the tool or lead to injury. Such usage will also void the user’s guarantee and warranty claims. Schrader records the activation date and reserves the right to analyse any returned part, as improper handling will not be covered by this warranty.
FCC ID:2AFXK
Environmental Notes
Warranty
Contact Us: Schrader1940 Opdyke CourtAuburn Hills, MI 48326
Tech Support: [email protected]
Visit Us:EZ-sensor.com/padSchraderInternational.comSensata.com
Contact Information
