RelaysFUJITSU TAKAMISAWA AMERICA, INC.

L - 10.6 mm W - 5.7 mmH - 9.3 mm

CONTACT DATAArrangement - 2 form C Material -Gold-overlay silver-alloyType - BifurcatedResistance (initial)-Maximum 100mΩ (at1 A 6VDC) Ratings (resistive) - Max.Switching Power: 62.5 VA or 30W

Max.Switching Voltage:250 VACMax.Switching Current: 1 A

Life Expectancy - Mechanical:50 x 106 ops. min.(at 3Hz)

Electrical: 100 x 103 ops. min. (at 1A 30VDC

at 0.5Hz), 100 x 103 ops. min.(at 0.3A 125VDC at 0.5Hz)

COIL DATAVoltage (at 20˚C) - 1.5m to 12 VPower (at 20˚C) - 0.14 W(non-latch), 0.100 W (latch)Operate Power (at 20˚C) - 0.078 W (non-latch).0.056W (latch)

GENERAL DATAInsulation Resistance - Min.1,000 MΩ (at 500 VDC)Dielectric Strength - 1,000 VAC 1min.(between open contacts)

1,500 VAC 1min.(coil and contacts)Surge Strength - 1,500 V (at 10 x160µs) [FCCPart 68](between

open contacts) 1,500 V (at 10 x160µs) [FCCPart 68]2,500 V(at 2 x 10µs) [Bellcore](coil and contacts)

Temperature Range - -40˚C to +85˚CTime Value - Operate:3 msec./ Release:3 msec.Weight - Approx.1.0 gEnclosure - LCPUL, 950, EN60950, IEC60950Meet spacing basic insulation 1500 working voltage, pollutiondegree2.

Signal Printed Circuit Board Relays

FTR-B4 RELAY

L - 10.6 mm W - 7.2 mmH - 5.45mm

CONTACT DATAArrangement - 2 form C Material -Gold-overlay silver-alloyType - BifurcatedResistance (initial)-Maximum 75mΩ (at1 A 6VDC) Ratings (resistive) - 1 A 30 VAC or 0.3A 125VDC

Max.Carrying Current:1 A Max.Switching Power: 62.5 VA or 30WMax.Switching Voltage:250 VAC or 220

VDCMax.Switching Current: 2 AMin.Switching Load:0.01mA 10m VDC

Life Expectancy - Mechanical:50 x 106 ops. min. (standard

type), 20 x 106 ops. min. (latching type)

Electrical:100 x 103 ops. min.(at 1A 30VDC

at 0.5Hz), 100 x 103 ops. min.(at 0.3A 125VDC at 0.5Hz)

COIL DATAVoltage (at 20˚C) - 1.5 to 12VDCPower (at 20˚C) - 0.14 W (non-latch), 0.100W (latch)Operate Power (at 20˚C) - 0.078 W (non-latch), 0.056W (latch)

GENERAL DATAInsulation Resistance - Min.1,000 MΩ (at 500 VDC)Dielectric Strength - 1,000 VAC 1min.(between open contacts)

1,500 VAC 1min.(coil and contacts)Surge Strength - 1,500 V (at 10 x160µs) [FCCPart 68](between

open contacts) 2,500 V (at 2 x 10µs) [Bellcore](coil and contacts)

Temperature Range - -40˚C to +85˚CTime Value - Operate:3 msec./ Release:3 msec.Weight - Approx.0.8gEnclosure - LCPUL, 950, EN60950, IEC60950Meet spacing basic insulation 1500 working voltage, pollutiondegree2.

FTR-B3 RELAY

Standard

NominalVoltage

CoilResistance

(±10%)

Must OperateVoltage (VDC

at 20˚C)

Must ReleaseVoltage (VDC

at 20˚C)

NominalPower (mW,

±10%at 20 ˚C)

Ordering Code

1.5 16.1Ω 1.13 0.15 140 FTR-B3(G)A1.5Z

3 64.3 Ω 2.25 0.3 140 FTR-B3(G)A003Z

4.5 145 Ω 3.38 0.45 140 FTR-B3(G)A4.5Z

12 1,028 Ω 9.0 1.2 140 FTR-B3(G)A012Z

Latching Type

1.5 22.5 Ω 1.13 -0.13 100 FTR-B3(G)B1.5Z

3 90 Ω 2.25 -2.25 100 FTR-B3(G)B003Z

4.5 203 Ω 3.38 -3.38 100 FTR-B3(G)B4.5Z

12 1,440 Ω 9.0 -9.0 100 FTR-B3(G)B012Z

Standard

NominalVoltage

CoilResistance

(±10%)

Must OperateVoltage (VDC

at 20˚C)

Must ReleaseVoltage (VDC

at 20˚C)

NominalPower (mW,

±10%at 20 ˚C)

Ordering Code

1.5 16.1Ω 1.13 0.15 140 FTR-B4 CA1.5Z

3 64.3 Ω 2.25 0.3 140 FTR-B4 CA3Z

4.5 145 Ω 3.38 0.45 140 FTR-B4 CA4.5Z

12 1,028 Ω 9.0 1.2 140 FTR-B4 CA12Z

Latching Type

1.5 22.5 Ω 1.13 0.13 100 FTR-B4 CB1.5Z

3 90 Ω 2.25 2.25 100 FTR-B4 CB003Z

4.5 203 Ω 3.38 3.38 100 FTR-B4 CB4.5Z

12 1,440 Ω 9.0 9.0 100 FTR-B4 CB012Z

508www.relayspec.com sales@relayspec.com

510www.relayspec.com sales@relayspec.com

RelaysFUJITSU TAKAMISAWA AMERICA, INC.

Signal Printed Circuit Board Relays

RA: 1 Amp DPDT, RA4: 1 Amp 4PDTL - RA: 0.795”, RA4:1.387”W - RA:0.394”, RA4:0.394”H - 0.394”, RA4:0.394”CONTACT DATAArrangement - 2 form C (DPDT), 4 form C (4PDT) Material - Gold overlay silver palladium alloy vs. silver palladium alloyType - BifurcatedResistance (initial) -Maximum 100 mΩ Rating (resistive) - 24 VDC 1 A or 120 VAC 0.5 A

Life Expectancy - Mechanical:2 x 107 ops. min.

Electrical: 2 x 105 ops. min. (0.5 A 120 VAC)

2 x 105 ops. min. (1 A 24 VAC)Maximum Carrying Current: 2 ACOIL DATAVoltage (at 20˚C) - 1.5 to 48 VDCPower (at 20˚C) - Operate:Standard: 67 to 90 mW

Single winding latching: 35 to 100 mWDouble winding latching: 75 to 180 mWNominal:Standard: 150 to 200 mWSingle winding latching: 75 to 200 mWDouble winding latching: 150 to 200 mW

Operate (at 20˚C) - Less than 70% of nominal voltageGENERAL DATAInsulation Resistance - 1000MΩ at 500 VDC (expect between P & S coil)Dielectric Strength - 1000 VAC (between open contacts)

1500 VAC (beween all other conductors)(expect between P & S coil)

Surge Strength - 1500 V between coil and contact, adjacent contacts Temperature Range - -40˚C to +80˚CTime Value - Operate: RA, RA4:6 msec.

Release: RA, RA4:4 msec.;RAL, RA4L:6msec.Enclosure - PBT nominal voltageVibration Resistance -RA:30 G, RA4: 20 G (10 to 55 Hz) Unerror

30 G, RA4:30 G, (10 to 55 Hz) DestructionShock Resistance -RA: 50 G, RA4:30 G, (11 ±1 mS) Unerror

100 G, RA4:100 G, (11±1 mS) DestructionWeight - Approx.RA: 3.7 g;RA4: 6.4 gEnclosure - PBT

RA / RA4 RELAY

Non-Latching RA ( ) W-K Type

NominalVoltage

CoilResistance

(±10%)

Must OperateVoltage (VDC

at 20˚C)

Must ReleaseVoltage (VDC

at 20˚C)

Ordering Code

Standard

1.5 15 Ω 1.0 0.15 RA 1.5W-K

3 60 Ω 2.0 0.3 RA 3W-K

4.5 135 Ω 3.1 0.45 RA 4.5W-K

5 167 Ω 3.4 0.5 RA 5W-K

6 240 Ω 4.0 0.6 RA 6W-K

9 540 Ω 6.1 0.9 RA 9W-K

12 960 Ω 8.1 1.2 RA 12W-K

18 2, 160 Ω 12.3 1.8 RA 18W-K

24 2, 880 Ω 16.1 2.4 RA 24W-K

48 11, 520 Ω 32.2 4.8 RA 48W-K

Single Winding Latching RAL ( ) W-K Type

1.5 30 Ω 1.0 -1.0 RAL 1.5W-K

3 120 Ω 2.1 -2.1 RAL 3W-K

4.5 270 Ω 3.1 -3.1 RAL 4.5W-K

5 335 Ω 3.4 -3.4 RAL 5W-K

6 480 Ω 4.1 -4.1 RAL 6W-K

9 1,080 Ω 6.3 -6.3 RAL 9W-K

12 1,920 Ω 8.3 -8.3 RAL 12W-K

18 4,320 Ω 12.5 -12.5 RAL 18W-K

24 5,760 Ω 16.6 -16.6 RAL 24W-K

48 11,520 Ω 21.0 -21.0 RAL 48W-K

Double Winding Latching RAL-D ( ) W-K Type

NominalVoltage

CoilResistance

(±10%)

Must OperateVoltage (VDC

at 20˚C)

Reset Voltage(VDC at20 ˚C)

Ordering Code

Standard

1.5 P/S 15 Ω 1.0 1.0 RAL D1.5W-K

3 P/S 60 Ω 2.0 2.0 RAL D3W-K

4.5 P/S 135 Ω 3.1 3.1 RAL D4.5W-K

5 P/S 167 Ω 3.4 3.4 RAL D5W-K

6 P/S 240 Ω 4.0 4.0 RAL D6W-K

9 P/S 540 Ω 6.1 6.1 RAL D9W-K

12 P/S 960 Ω 8.1 8.1 RAL D12W-K

18 P/S 2,160 Ω 12.3 12.3 RAL D18W-K

24 P/S 2,880 Ω 16.1 16.1 RAL D24W-K

48 P/S 11,520 Ω 32.2 32.2 RAL D48W-K

Standard RA4 ( ) W-K Type

1.5 11 Ω 1.0 0.15 RA4 1.5W-K

3 45 Ω 2.1 0.3 RA4 3W-K

4.5 101 Ω 3.1 0.45 RA4 4.5W-K

5 125 Ω 3.5 0.5 RA4 5W-K

6 180 Ω 4.2 0.6 RA4 6W-K

9 405 Ω 6.3 0.9 RA4 9W-K

12 720 Ω 8.4 1.2 RA4 12W-K

18 1,620 Ω 12.6 1.8 RA4 18W-K

24 2,880 Ω 16.8 2.4 RA4 24W-K

48 11,520 Ω 33.6 4.8 RA4 48W-K

Single Winding Latching Type RA4L ( ) W-K Type

1.5 25Ω 1.0 -1.0 RA4L 1.5W-K

3 100 Ω 2.1 -2.1 RA4L 3W-K

4.5 225 Ω 3.1 -3.1 RA4L 4.5W-K

5 278 Ω 3.5 -3.5 RA4L 5W-K

6 400 Ω 4.2 -4.2 RA4L 6W-K

9 900 Ω 6.3 -6.3 RA4L 9W-K

12 1,600 Ω 8.4 -8.4 RA4L 12W-K

18 3,600 Ω 12.6 -12.6 RA4L 18W-K

24 6,400 Ω 16.8 -16.8 RA4L 24W-K

48 25,600 Ω 33,6 -33,6 RA4L 48W-K

DoubleWinding Latching Type RA4L-D ( ) W-K Type

1.5 P/S 12.5 Ω 1.0 1.0 RA4L D1.5W-K

3 P/S 50 Ω 2.1 2.1 RA4L D3W-K

4.5 P/S 113 Ω 3.1 3.1 RA4L D4.5W-K

5 P/S 139 Ω 3.5 3.5 RA4L D5W-K

6 P/S 200 Ω 4.2 4.2 RA4L D6W-K

9 P/S 450 Ω 6.3 6.3 RA4L D9W-K

12 P/S 800 Ω 8.4 8.4 RA4L D12W-K

18 P/S 1,800 Ω 12.6 12.6 RA4L D18W-K

24 P/S 3,200 Ω 16.8 16.8 RA4L D24W-K

48 P/S 12,800 Ω 33,6 33,6 RA4L D48W-K

RelaysFUJITSU TAKAMISAWA AMERICA, INC.

Power Printed Circuit Board Relays

5, 10, 16 Amp SPST-NOL - 0.945”W - 0.433”H - 0.984”

CONTACT DATAArrangement - 1 form A (SPST-NO)Material -Silver-alloyType - SingleResistance (initial)- Maximum 100mΩ (at 1 A 6 VDC) Ratings (resistive) -F2: 250VAC/30VDC, 5A, H2: 250VAC/30VDC,10A

K2:250VAC/30VDC, 16A Max.Carrying Current:F2:5A, H2: 10A, K2:16A Max.Switching Power: F2:1250 VA/150W,H2: 2500 VA/300W, K2: 4000VA/480WMax.Switching Voltage:400 VAC /300 VDCMax.Switching Current: F2:5A, H2:10A, K2:16A

Life Expectancy - Mechanical: 2 x 106 ops. min.

Electrical:100x103 ops. min.(contact rating)

25 x 103 ops. min. (lamp load)COIL DATAVoltage (at 20˚C) - 5 to 48VDCPower (at 20˚C) - 0.53WOperate Power (at 20˚C) - 0.26W

GENERAL DATAInsulation Resistance - Min.1,000MΩDielectric Strength - 1,000 VAC 1min.(between open contacts)

4,000 VAC 1min.(coil and contacts)Surge Strength - 10,000 V (at 1.2 x 50Ωµs)Temperature Range - -40˚C to +70˚CTime Value - Operate: 15 msec./ Release:5 msec.(at nominal voltage)Weight - Approx.12 gEnclosure - PBT

FTR-F2/H2/K2 RELAY

5,10, 16 Amp SPST-NO, SPDTL - 1.102 “W - 0.504”H - 0.650”

CONTACT DATAArrangement - F1: 2 form A, C; H1/K1:1 form A, CMaterial -Gold plate silver alloyType - SingleResistance (initial)- Maximum 100mΩ (at 1 A 6 VDC),

K1:277VA/300VDC Ratings (resistive) -F1: 5 A 250 VAC/24VDC/ H1:10A 250VDC/30VDC

Max.Carrying Current: F1:7A, H1: 14A , K1:16A Max.Switching Power: F1: 1,250 VA/ 120WH1:2,500 VA/ 300W, K1:4000VA/480W Max.Switching Voltage:F1: 400 VAC/ 300 VDCH1:380 VAC/ 300VDC, K1:400 VAC/ 300VDCMax.Switching Current: F1:5 A, H1:10 A, K1:16AMax.Switching Load:10 mA 5VDC

Life Expectancy - Mechanical:2x 107 ops. min.

Electrical:1x105 ops. mi.(Standard and sensitive

types) 2.5 x 104 ops. min.(TV3/5 rating type)COIL DATAVoltage (at 20˚C) - 5 to 48 VDCPower (at 20˚C) - 0.53 W Standard, 0.4W SensitiveOperate Power (at 20˚C) - 0.26W Standard, 0.23W Sensitive

GENERAL DATAInsulation Resistance - 1000 MΩDielectric Strength - 1,000 VAC 1min.(between open contacts)

5,000 VAC 1min.(coil and contacts)Surge Strength - 10,000 V (at 1.2 x 50µs)Temperature Range - -40˚C to +75˚CTime Value - Operate: F1:15 msec., H1: 10msec., K1:20msec.

Release:5 msec.(F1/H1 at nominal voltage), K1:10msec.Weight - Approx.12 gEnclosure - PBT

FTR-F1/H1K1 RELAY

Standard Type ** Insert F1, H1, or K1

NominalVoltage

CoilResistance

(±10%)

Must OperateVoltage (VDC

at 20˚C)

Must ReleaseVoltage (VDC

at 20˚C)

Ordering Code

StandardTV- Rating

Type

5 47 Ω 3.5 0.5 FTR-** (C,A)A005V FTR-** AA005T

6 68 Ω 4.2 0.6 FTR-** (C,A)A006V FTR-** AA006T

9 15 Ω 66.3 0.9 FTR-** (C,A)A009V FTR-** AA009T

12 270 Ω 8.4 1.2 FTR-** (C,A)A012V FTR-** AA012T

24 1,100 Ω 16.8 2.4 FTR-** (C,A)A024V FTR-** AA024T

48 4,400 Ω 33.6 4.8 FTR-** (C,A)A048V FTR-** AA048T

Sensitive Type ** Insert F1, H1, or K1

5 62 Ω 3.75 0.5 FTR-** (C,A) D005V

6 90 Ω 4.5 0.6 FTR-** (C,A) D006V

9 202 Ω 6.75 0.9 FTR-** (C,A) D009V

12 360 Ω 9.0 1.2 FTR-** (C,A) D012V

24 1,440 Ω 18.0 2.4 FTR-** (C,A) D024V

48 5,760Ω 36.0 4.8 FTR-** (C,A) D048V

Standard Type (530mW)

NominalVoltage

CoilResistance

(±10%)

MustOperateVoltage(VDC at20 ˚C)

MustReleaseVoltage(VDC at20 ˚C)

Ordering Code

TV-3 Rating5A Type

TV-5 Rating10A Type

TV-8 Rating16A Type

5 47 Ω 3.5 0.5 FTR-F2AK005T FTR-H2AK005T FTR-K2AK005T

6 68 Ω 4.2 0.6 FTR-F2AK006T FTR-H2AK006T FTR-K2AK006T

9 155 Ω 6.3 0.9 FTR-F2AK009T FTR-H2AK009T FTR-K2AK009T

12 270 Ω 8.4 1.2 FTR-F2AK012T FTR-H2AK012T FTR-K2AK012T

24 1,200 Ω 16.8 2.4 FTR-F2AK024T FTR-H2AK024T FTR-K2AK024T

48 4,400 Ω 33.6 4.8 FTR-F2AK048T FTR-H2AK048T FTR-K2AK048T

Sensitive Type (250mW)

5 100Ω 4.0 0.25 FTR-F2AL005T FTR-H2AL005T

6 145 Ω 4.8 0.30 FTR-F2AL006T FTR-H2AL006T

9 325 Ω 7.2 0.45 FTR-F2AL009T FTR-H2AL009T

12 575 Ω 9.6 0.60 FTR-F2AL012T FTR-H2AL012T

24 2,310 Ω 19.2 1.20 FTR-F2AL024T FTR-H2AL024T

516www.relayspec.com sales@relayspec.com

RelaysFUJITSU TAKAMISAWA AMERICA, INC.

Automotive Printed Circuit Board Relays

FBR-512/522 RELAY25 Amp

L - 15.5 mmW - 12.1 mmH - 13.7 mm

CONTACT DATAArrangement - 1 form C (SPDT) Material -Silver-tin oxide indium Type - SingleVoltage Drop (Resistance) -Maximum 100 mΩ (at 2 A 12VDC) Ratings (resistive) -14 VDC 20 A (W, W1 type), 14 VDC inrush

20A, break 4 A (motor free load) (N type)Max.Carrying Current:35 A / 10 min., 25 A 1hr (25˚C, 100% rated coil voltage)Max.Inrush Current:60 A (W, W1 type), 40 A (N type)Max.Switching Current:35 A 16 VDCMin.Switching Load:1A 6 VDC

Life Expectancy - Mechanical:10 x 106 ops. min.

Electrical:W:2 x 105 ops. min.(14VDC 20 A,

locked motor load), W1:2 x 105 ops. min.(14VDC 25 A, locked motor load)

COIL DATAVoltage (at 20˚C) - 9, 10, 12 VDCPower (at 20˚C) - 600 mWOperate Power (at 20˚C) - 220 mW

GENERAL DATATemperature Range - -40˚C to +85˚CTime Value - Operate:10 msec. / Release:5 msec.Weight - Approx.6 gEnclosure - Plastic sealed type

FBR-51/52 RELAY25 Amp

L - 24.0 mmW - 16.2 mmH - 14.1 mm

CONTACT DATAArrangement - 1 form C x 2(SPDT x 2) TwinMaterial -Silver-tin oxide indiumType - SingleVoltage Drop (Resistance) - Maximum 100 mV (at 2 A 12VDC) Ratings (resistive) -14 VDC 20 A (W), 14 VDC 25A (W1)

Max.Carrying Current:35 A / 10 min., 25 A 1hr (25˚C, 100% rated coil voltage)Max.Inrush Current:60 AMax.Switching Current: 35 A 16 VDCMin.Switching Load:1A 6 VDC

Life Expectancy - Mechanical:1 x 107 ops. min.

Electrical:W:2 x 105 ops. min.(14VDC 20 A,

locked motor load), W1:2 x 105 ops. min.(14VDC 25 A, locked motor load)

COIL DATAVoltage (at 20˚C) - 9, 10, 12 VDCPower (at 20˚C) - 600 mWOperate Power (at 20˚C) - 220 mW

GENERAL DATATemperature Range - -40˚C to +85˚CTime Value - Operate: 10 msec./ Release:5 msec.Weight - Approx.13 gEnclosure - Plastic sealed type

FBR 51 Series

NominalVoltage

CoilResistance

(±10%)

Must OperateVoltage (VDC

at 20˚C)

ThermalResistance

Ordering Code

W contact W1 Ccntact

9 135 Ω 5.4

73˚C/W

FBR51ND09-W FBR51ND09-W1

10 180 Ω 6.3 FBR51ND10-W FBR51ND10-W1

12 240 Ω 7.3 FBR51ND12-W FBR51ND12-W1

FBR 52 Series

9 100 Ω 5.4

65˚C/W

FBR52ND09-W FBR52ND09-W1

10 135 Ω 6.3 FBR52ND10-W FBR52ND10-W1

12 280 Ω 7.3 FBR52ND12-W FBR52ND12-W1

FBR 512 Series

NominalVoltage

CoilResistance

(±10%)

Must OperateVoltage (VDC

at 20˚C)

ThermalResistance

Ordering Code

W contact W1 Ccntact

9 135 Ω 5.4

73˚C/W

FBR512ND09-W FBR512ND09-W1

10 180 Ω 6.3 FBR512ND10-W FBR512ND10-W1

12 240 Ω 7.3 FBR512ND12-W FBR512ND12-W1

FBR 522 Series

9 100 Ω 5.4

65˚C/W

FBR522ND09-W FBR522ND09-W1

10 135 Ω 6.3 FBR522ND10-W FBR522ND10-W1

12 180 Ω 7.3 FBR52ND12-W FBR522ND12-W1

517

7RELAYS

Toll Free 1-800-526-5376 Fax 201-337-1862201-337-1000