Fujitsu Midrange Storage Systems

ETERNUS4000

Midrange Storage System ETERNUS4000

Top-class storage cost/performance for demanding business environments

In today’s business world, your company faces many challenging issues including increasing data storage and management costs. Compliance with new laws and internal governance may place additional demands on data protection and security. Meeting your corporate social responsibilities by tackling environmental issues could also be a serious concern.

With best-in-class performance, scalability, and reliability, ETERNUS4000 realizes large-scale storage consolidation and enterprise-class storage solutions in a midrange system.

Floor StandStorage capacity*: Max. 207 TBCache capacity: Max. 8 GBNo. of controllers: 2No. of host interfaces: FC: 2-8 iSCSI: 2/4

Rack mountStorage capacity*: Max. 417 TBCache capacity: Max. 32 GBNo. of controllers: 2No. of host interfaces: FC: 4-16 iSCSI: 4/8

Floor StandStorage capacity*: Max. 417 TBCache capacity: Max. 32 GBNo. of controllers: 2No. of host interfaces: FC: 4-16 iSCSI: 4/8

Rack mountStorage capacity*: Max. 207 TBCache capacity: Max. 8 GBNo. of controllers: 2No. of host interfaces: FC: 2-8 iSCSI: 2/4

(*)Storage capacity is physical capacity calculated as 1Kbyte = 1,000bytes. Includes system disk drives.

Model 400 Model 600

Large-scale consolidationHigh scalability for large-scale consolidation. The high performance and reliable design makesw for stable system operation.

Data protectionA range of high-speed copy functions between base storage units. Plus data encryption functions that prevent information leakage. Key corporate information has never been more secure.

TCO reductionFull function effective management of large-scale SAN with the ability to quickly respond to business change.

Environment-consciousAn environmentally-conscious product. It supports power saving operation that helps reduce pressure on the environment.

ETERNUS4000 Features

ETERNUS4000 Lineup

FC disk drives Nearline SATA disk drives

Each controller module is connected 2 Gbit/s x2 dedicated high-speed bus (PCI Express)

ETERNUS4000 Model 600/400

DA: Device Adapter

Large-scale storage consolidation and best-in-class scalability, performance and reliability

High performance

High reliability

Scalability

ETERNUS4000 supports Max. 420 drives delivering up to 417 TB capacity. The number of host interfaces expands to a maximum of 16, with cache memory Max. 32 GB. State-of-the-art modular architecture combines Controller Modules (CM), Channel Adapters (CA), and Device Adapters (DA) to provide the high speed data transfer and mass scalability needed for large-scale storage consolidation.

High speed components

Model 600 uses a 2.83GHz quad-core processor and Model400 uses a 2.33GHz dual-core processor per controller. Drive interfaces support 4Gbps fibre channel, and host interfaces support Max. 8Gbps fibre channel interface. 4Gbps fibre channel drive and Max. 8Gbps fibre channel host interfaces provide highest possible throughput.

Multi-controllers

The number of internal storage controllers is 2. Redundant controllers with high speed processors means your storage system can handle very heavy transaction loads as well as ensure high reliability and data integrity, even if one controller fails.

Fibre Channel switch support

ETERNUS4000 uses 4Gbps fibre bus switches between controllers and individual disk drives. Their speed of operation provides the highest I/O transaction performance and removes data transition delays. This minimizes the effect of disk failures, and significantly improves the reliability of your system; over loop connection architecture.

Supports latest drive technology

ETERNUS4000 supports 300 GS (10,000 rpm) and 450 GB, 300 GB, 146 GB (15,000 rpm) FC disk drives with concurrent use of 1TB, 750 GB, 500 GB, (7,200 rpm) Nearline SATA disk drives for backup and data archiving.

In addition 146 GB, 73 GB Solid State Drives (SSD) which enable approximate-ly 16 times faster access1 and 40% less power consumption2 compared to traditional hard disk drives are supported.

Duplicate Fibre Channel interfaces mean high reliability and ability to mix different drives in the same enclosure.

1) Compared to 15,000 rpm FC disk drive in Read/Write=3:12) Compared to 15,000 rpm FC disk drives in operation

High-reliability is fundamental to design

Key components including controllers, power supply units, fans, and batteries are all duplicated. In case of power failure, data in cache is automatically de-staged to a disk drive which is driven by an in-built battery. This provides you with long term data protection. If a controller fails, the remaining controller ensures operations continue without service interruption.

RAID6 support

RAID6 support is provided to enable you to have two parity disks in each RAID group. This means your data is secure even if two simultaneous disk drive failures occur. In addition RAID1, 1+0 and 5 are supported to provide a wide choice of options for your business.

Large-scale consolidation

Set up and managethe encrypted data

Multi-generation archiving with D2D backupin a single system

SATA disk drives (1 TB)

Data protection function enhance business continuity, compliance and security

Disaster recovery

Remote Advanced Copy function, an Advanced Copy enhancement, allows your data to be replicated between multiple ETERNUS storage systems with-out increasing the load on your servers. Both synchronous and asynchronous copying are available for data duplication. Data replication is possible between ETERNUS4000 systems and ETERNUS8000 systems, as well as between

multiple ETERNUS4000 systems. Both SAN-WAN-SAN connection using Fibre Channel interfaces and LAN-WAN-LAN connection using iSCSI are supported. IPsec (Security Architecture for Internet Protocol) is available with iSCSI to encrypt the data being transferred. This enables you to build your disaster recovery system environment using lower cost IP circuits.

Data encryption

ETERNUS4000 enables the storing of data in encrypted form using the 128 bit AES* method. This minimizes the risk to your business of illegal access, data theft and falsification of confidential information.

* AES: Advanced Encryption Standard, code for U.S. federal information processing standard

High speed back-up

Back-up during business operation

The combination of ETERNUS4000 Advanced Copy functions and ETERNUS SF AdvancedCopy Manager means you can replicate original data volumes without business interruption. Back-up processing is possible even while the system is operational as back-up to tape uses the replicated volume. Even if a fault occurs on the original volume, you can quickly recover the data from the replicated volume. In addition, it provides lower cost D2D (Disk to Disk) using Nearline SATA disk drives for replicated volumes.

A range of effective back-up functions

ETERNUS4000 provides you with the following copy functions.

OPC (One Point Copy)OPC copy functions let you create a duplicate copy of any data from the original at a time of your choosing, and provides a full duplicate of the original data. This suits multi-generation archiving a full backup of each generation is available.

QuickOPCInitially duplicates all the original data and then copies just those data items subsequently updated. This suits large scale data base systems which require a reduced back-up window. Only the updated data is copied after initial copy.

SnapOPCCopies the original data before it is updated. This suits file servers with relatively small data updates, as it uses less disk capacity than a full data copy.

Data protection

Storage consolidation of heterogeneous server environments

Database Mail data File data

Fibre Channel Fibre Channel Fibre Channel

WindowsLinuxUnix

ETERNUS4000

RAID0+1146 GB

15,000rpmdisk drives

RAID5300 GB

10,000rpmdisk drives

RAID5300 GB

10,000rpmdisk drives

SANStorage Area Network

AllocateArea

Write

Write

Allocate CapacityThreshold amount to warn

Threshold warning

Add disk drives

ETERNUS4000

Server Virtual Volumes Physical Disk Pool

Enhanced connectivity for multi-platform environments

Integrated management of storage environment

ETERNUS4000 supports Fibre Channel (Max. 8Gbps) and iSCSI as host interfaces. This means you can build very large and scalable SAN (Storage Area Network) configurations linked to SPARC Enterprise and PRIMEQUEST servers as well as other leading IA and UNIX server products. In addition, your data can be shared between multiple servers, resulting in bigger TCO reductions as less disk capacity is wasted. You can also achieve centralized system control and effective utilization of all system resources.

Storage management software ETERNUS SF Storage Cruiser provides centralized system control of SAN/DAS/NAS storage resources and enhances operation management efficiency. It shows you the status of the entire storage system and physical connections as an intuitive graphical interface. You are able to see the storage resource available by defining the relationships of each machine. You can also easily understand the relationships between resources. Straightforward,

parameter driven configuration allows automatic off-site or remote configuration. Problems on target machines are shown as console events, with the problem components and their impact clearly defined for rapid and accurate troubleshooting. Performance information on target storage devices and fibre channel switches can also be displayed and managed. When set thresholds are exceeded on a particular device you are notified so you can ensure stable operation continues.

Drastic reduction in both TCO and management costs from advanced operation support

Flexible operation management

Volume reconfiguration without business interruption

The RAID Migration facility enables dynamic migration of one logical volume to another RAID group, with no effect on business application operation. You can also reconfigure RAID levels (i.e. RAID5 to RAID1+0) as required. This effective and flexible system reconfiguration method, lets you prioritize user policy based on data volumes, numbers of transactions, or levels of reliability.

RAID group expansion without business interruption

You can also add disk drives and new LUNS without business interruption. Previously it was necessary to add a RAID group to add capacity. Now you can expand capacity matched to real capacity increases just by adding a disk at a time to an existing RAID group a disk at a time.

Volume capacity expansion without business interruption

Dynamic LUN expansion without business interruption is possible. Hot-expansion of other options such as drive enclosures, disk drives, controllers and channel adapters is also supported. Now you have the flexibility to perform all capacity expansion and performance enhancements without business interruption.

Disk drive capacity virtualization (Thin Provisioning)

Accurate virtualization of disk drive capacity supports This Provisioning. You create virtual logical volumes with capacity exceeding actual physical disk. Drives become a physical pool that is allocated automatically when servers write data. Use of disk space is more efficient as the physical pool is shared by several logical volumes. The setting of thresholds warns of physical disk pool shortages making disk addition easy. Thin Provisioning improves ROI by reducing the manpower needed for capacity design and operation management.

TCO reduction

Virtualization Switch ETERNUS VS900 in collaboration with ETERNUS SF Storage Cruiser, physical disk arrays can be used as one virtual storage. Storage virtualization allows you to allocate necessary volumes dynamically according to operational situation. This provides simple configuration system for users. Increase of storage usage rate and effective use of storage resources are realized.

ETERNUS4000 supports Eco-mode which applies MAID technology (disks rotate only when necessary). You can now spin down disk drives when they are not being used. This will reduce your power consumption. Eco-mode can be applied to specific RAID groups, and use can be scheduled based on backup operation times. Disk rotation stops when specified drives are not accessed

for a given period of time (adjustable). Stopped drives take less than 1 minute to reactivate for access. In the following example, reductions of 15% power consumption (total), 4,720kWh power consumption/year and 1,830kg CO2 emissions*, were possible.

* Comparison between constant use and 20 hours rotation stop per one day.

ETERNUS complies with European Union RoHS directives which restrict the use of six hazardous materials in the manufacture of electronic and electrical equipment: Lead, Mercury, Cadmium, Hexavalent chromium, PBB(Polybrominated biphenyls), PBDE (Polybrominated diphenyl ether).

ETERNUS4000 is a ‘Green Product’ which meets the strict conditions of resource saving, 3R design*, energy consumption, non-use of hazardous substances, materials and technology that contributes to environmental effect reduction and other environmental considerations.

*Please refer to the following Fujitsu web-site for details; http://www.fujitsu.com/global/about/environment/

Storage virtualization

Energy Saving Operation

RoHS directive

Environment-conscious

Environmental Approach

Virtual Disks

Servers

Disk Array

Virtual Storage Pool

SAN

Operating period

MAID (Massive Array of Idle Disks) technology

Uptime is only4 hours a day

Example

ETERNUS4000

Online Disk

Nearline Disk Nearline Disk Nearline Disk

Online Disk Online Disk

Drive rotation on

Drive rotation off Operating periodBackup

15% power consumption reduction

Drive rotation stop

Drive rotation

Drive rotation stop

Data volume

Backup volume

Number of host interfaces

Fibre ChanneliSCSI

Cache capacityNumber of drives

Drive interface

Max. weightVoltageNo. of phasesFrequency

TemperatureHumidity

Powerrequirements

Dimensions [W x D x H](with exp. cabinet)

Max. power consumption (W)Max. heat dissipation (KJ/h)Environmentalconditions

FC disk drive

SSD (Solid State Drives)

Disk drive

SATA disk drive

Number of controllersHost interface

Model nameForm factorRAID Levels

FC disk drive

Physical capacity*1

Logical capacity*2

Physical capacity*1

Logical capacity*2

Storagecapacity

Specifications

Regulatory

FCC Class A, CE Mark, EN55024 Immunity, EN55022 Class A, VCCI Class A (for Japan), AS/NZS 3548 Class A (for Australia/New Zealand), Class A (for Taiwan)

Max. 126.0 TB0, 1, 1+0, 5, 6*5

Floor stand Rack mount Floor stand Rack mountModel 400 Model 600

Max. 88.6 TBMax. 417.2 TBMax. 297.2 TB

Max. 63.0 TB

2,314.85 lbs.

23.2" x 39" x 70.9"(46.5" x 39" x 70.0")

19" x 30.3" x 21" [12U]*3

[Min. configuration]19" x 30.3" x 21" [12U]*4

[Min. configuration]23.2" x 39" x 70.9"69.7" x 39" x 70.9"

1,675.51 lbs. 4,012.41 lbs. 3,075.45 lbs.

770027,800

AC200-240VSingle

50/60Hz

53,00014,700

2

Max. 43.8 TBMax. 207.2 TBMax. 148.9 TB

2-82 or 4

Max. 8 GBMax. 210

4-164 or 8

Max. 32 GBMax. 420

41-95°F (Operating), 32-122°F (Non-operating)

Fibre Channel (4 Gbps)146 GB, 73 GB

Nearline SATA disk drive 1 TB/750 GB/500 GB (7,200 rpm)

20-80%RH (Operating), 8-80% (Non-operating)

300 GB (10,000 rpm), 450 GB/300 GB/146 GB/ (15,000 rpm)

Fibre Channel (Max. 8 Gps), iSCSI (Max. 1 Gbps)

UL60950-1, CSA60950-1, EN60950-1, ISO9001, ISO14001

Safety, Quality,andEnvironmentalStandards

Electromagnetic Emissionsand Immunity

Supported Servers/OS

Others

Sun

HP

Power Systems, Systems p, pSeries, RS/6000 series,

Sun Fire, Sun Blade, Sun EnterpriseHP Integrity Servers

Series, RS/6000 series

Solaris™ 10 Operating System, Solaris™ 9 Operating System, Solaris™ 8 Operating System

AIX 6.1, AIX 5.3, AIX 5.2

HP-UX 11iv3 (IPF), HP-UX 11iv2 (IPF), Windows Server 2008 for Itanium-based Systems, Windows Server 2003 for Itanium based Systems

HP 9000 series HP-UX 11iv3 (PA-RISC), HP-UX 11iv2 (PA-RISC)

Industry Standard Server Windows Server 2008 Datacenter, Windows Server 2008 Enterprise, Windows Server 2008 Standard, Windows Server 2003 Enterprise Edition, Windows Server 2003 Enterprise x64 Edition, Windows Server 2003, Standard Edition, Windows Server 2003, Standard x64 Edition, Windows Server 2003 R2, Enterprise Edition, Windows Server2003 R2, Enterprise x64 Edition, Windows Server 2003 R2, Standard Edition, Windows Server 2003 R2, Standard x64 Edition, Windows 2000 Server, Red Hat Enterprise Linux 5 (for x86), Red Hat Enterprise Linux AS/ES (v.4 for x86), Red Hat Enterprise Linux AS/ES (v.4 for EM64T), Red Hat Enterprise Linux AS/ES (V.3 for x86), SUSE Linux Enterprise Server 10, SUSE Linux Enterprise Server 9, SUSE Linux Enterprise Server 8 x86 Solaris™ 10 Operating System, VMware® Infrastructure 3, VMware® ESX Server 2

Egenera PAN Manager Software

Itanium Server Windows Server 2008 for Itanium-based Systems, Windows Server 2003 for Itanium-based Systems, Red Hat Enterprise Linux 5 (for Intel Itanium), Red Hat Enterprise Linux AS (v.4 for Itanium), SUSE Linux Enterprise Server 10 for Itanium Processor Family, SUSE Linux Enterprise Server 9 for Itanium Processor Family.

Manufacturer

Fujitsu

Supported Server Supported OSPRIMEQUEST

SPARC Enterprise

SPARC Enterprise

PRIMERGYPRIMEPOWER

Solaris™10 Operating System

Solaris™ 10 Operating System

Windows Server ® 2008 for Itanium-based Systems, Windows Server® 2003, Datacenter Edition for Itanium-based systems. Red Hat Enterprise Linux 5 (for Intel Itanium), Red Hat Enterprise Linux AS (v.4 for Itanium, SUSE Linux Enterprise Server 9 for Itanium Processor Family

Windows® 2008 Server (64bit) Windows Server 2008 Enterprise, Windows Server 2008, Standard, Widows Server 2003, Enterprise Edition, Windows Server 2003, Enterprise x64 Edition, Windows Server 2003, Standard Edition, Windows Server 2003, Standard x64 Edition, Windows Server 2003 R2, Enterprise Edition, Windows Server 2003 R2, Enterprise x64 Edition, Windows Server 2003 R2, Standard Edition, Windows 2000 Server, Red Hat Enterprise Linux 5 (for x86), Red Hat Enterprise Linux 5 (for Intel64), Red Hat Enterprise Linux AS/ES (v.3 for x86, VMware® Infrastructure 3, VMware® ESX Server2

Solaris™ 10 Operating System, Solaris™ 9 Operating System, Solaris™ 8 Operating System

*1: Calculated as 1k byte = 1,000bytes*2: Calculated as 1k byte = 1,024bytes, and when formatted at RAID5. User capacity depends on the system environment.*3: Up 14.3U height drive enclosures can be used with the base configuration of model 400 rack mount type *4: Up to 28 3U height drive enclosures can be used with the base configuration of model 600 rack mount type. *5: Nearline SATA disc drives support RAID5 and RAID6 only

Fujitsu America, Inc.

1250 East Arques Avenue Sunnyvale, CA 94085-3470, U.S.A. Telephone: 800 831 3183 or 408 746 6000 Fax: 408 764 5060 Web: us.fujitsu.com/solutions Email: solutions@us.fujitsu.com

Fujitsu, the Fujitsu logo, PRIMEQUEST, PRIMEPOWER and ETERNUS are trademarks or registered trademarks of Fujitsu Limited in the United States and other countries. Sun, Sun Microsystems, Solaris and all Solaris based marks and logos, Sun Fire, Sun Blade, and Sun Enterprise are trademarks or registered trademarks of Sun Microsystems, Inc. in the U.S. and other countries, and are used under license. All other trademarks mentioned herein are the property of their respective owners. Product description data represents Fujitsu design objectives and is provided for comparative purposes; actual results may vary based on a variety of factors. Specifications are subject to change without notice. Product description data represents Fujitsu design objectives and is provided for comparative purposes; actual results may vary based on a variety of factors. Specifications are subject to change without notice.

© 2009 Fujitsu America, Inc.All rights reserved. FPC58-1582-08 10/09.09.0994