2
Multi-Service Provisioning Platform (MSPP) Ethernet Transport Features Key Benefits Single platform for SDH, Layer 2 switching, and WDM functionalities with GMPLS/ASON ready for future upgrade High-density and flexible subrack architecture with as many as 34 x STM- 64 or 136 x STM-16 with direct E1 up to 504 x E1 and Ethernet interfaces in single shelf Data service applications such as EPL (Ethernet Private Line), EVPL (Ethernet Virtual Private Line), EPLAN (Ethernet Private LAN), and EVPLAN (Ethernet Virtual Private LAN) Layer 2 processing to reduce the bandwidth requirements, and therefore enable cost-effective data transport over the SDH infrastructure single shelf All-in-one-box solution to satisfy network and service demands from STM-64, STM-16, STM-4, STM-1, STM-1E, E3, DS3, and E1, to Fast Ethernet, Gigabit Ethernet, and 10 Gigabit Ethernet. Reliable network supported by traffic protection schemes such as 1+1/1:N over the SDH infrastructure VLANs or double-tagged VLANs to enable 802.1p QoS/CoS, as well as segregation of traffic flows, and thereby increase security without sacrificing bandwidth efficiency or network flexibility Advanced Resilient Packet Ring (RPR) technology to provide high- Fujitsu’s FLASHWAVE 4x70 Multi- Service Provisioning Platform (MSPP) protection schemes such as 1+1/1:N MSP, SNCP and 2-fiber MS-SPRing for SDH layer, as well as and Rapid Spanning Tree Protocol (RSTP) for Ethernet layer Next-generation SDH functionality such as General Framing Protocol (GFP), Virtual Concatenations (VCAT), and Link Capacity Adjustment Scheme (RPR) technology to provide high reliable and efficient data transport with QoS control Management Features Speedy operation and maintenance through local craft terminal FLEXR L Service Provisioning Platform (MSPP) series provides telecommunication carriers and service providers with a powerful solution to survive their fiercely competitive industry. Integrating reliable and intelligent SDH functionality and efficient Ethernet aggregation and switching into a compact body, the FLASHWAVE 4x70 MSPP bl b th t diti l i (LCAS) functions for dynamic bandwidth allocation, adjustments, and protection Non-blocking, large-capacity switching matrix that’s optimal for metro aggregation as well as core networks; 340G for high-order VC and 40G for low-order VC The FLASHWAVE 4570 is an STM-64 MSPP optimi ed for Metro Aggregation through local craft terminal FLEXR L Network element and sub-network- based management system FLEXR C R3, to enable seamless management of all SDH, PDH, and Ethernet layers MSPP enables both traditional voice- based services and increasingly diverse data services to be delivered over a unified optical network. Enriched with next-generation SDH functionality, the FLASHWAVE 4x70 MSPP allows carriers to not only simplify their network, but also to efficiently, flexibly, and dynamically use network Small Form-factor Pluggable (SFP) interfaces to deliver optical rate and parameter flexibility on a per-port basis MSPP optimized for Metro Aggregation and Core network applications. Typical node configurations are: 2 x STM-64, 8 x STM-1e(1:N), 1 x 10GE (Transparent), 8 x GE (Transparent), 8 x STM-4, 504 x E1, 2GE + 12FE (RPR), 2 x STM-16 subtending rings in single shelf configuration bandwidth with a simple management procedure. In this way, the FLASHWAVE 4x70 MSPP helps to satisfy the growing end-user’s demand in an increasing variety of broadband services at a substantially reduced cost. configuration Multiple STM-N with direct E1, FE, GE, and 10GE High-Capacity Metro Core Solution

Fujitsu Flashware 4570 Manual

  • Upload
    hung-le

  • View
    227

  • Download
    3

Embed Size (px)

DESCRIPTION

Fujitsu Flashware 4570 Manual

Citation preview

Multi-Service Provisioning Platform (MSPP)

Ethernet Transport FeaturesKey Benefits

Single platform for SDH, Layer 2switching, and WDM functionalities withGMPLS/ASON ready for futureupgrade

High-density and flexible subrackarchitecture with as many as 34 x STM-64 or 136 x STM-16 with direct E1 upto 504 x E1 and Ethernet interfaces insingle shelf

Data service applications such asEPL (Ethernet Private Line), EVPL(Ethernet Virtual Private Line), EPLAN(Ethernet Private LAN), and EVPLAN(Ethernet Virtual Private LAN)

Layer 2 processing to reduce thebandwidth requirements, and thereforeenable cost-effective data transportover the SDH infrastructuresingle shelf

All-in-one-box solution to satisfynetwork and service demands fromSTM-64, STM-16, STM-4, STM-1,STM-1E, E3, DS3, and E1, to FastEthernet, Gigabit Ethernet, and 10Gigabit Ethernet.

Reliable network supported by trafficprotection schemes such as 1+1/1:N

over the SDH infrastructure

VLANs or double-tagged VLANs toenable 802.1p QoS/CoS, as well assegregation of traffic flows, and therebyincrease security without sacrificingbandwidth efficiency or networkflexibility

Advanced Resilient Packet Ring(RPR) technology to provide high-

Fujitsu’s FLASHWAVE 4x70 Multi-Service Provisioning Platform (MSPP)

protection schemes such as 1+1/1:NMSP, SNCP and 2-fiber MS-SPRing forSDH layer, as well as and RapidSpanning Tree Protocol (RSTP) forEthernet layer

Next-generation SDH functionalitysuch as General Framing Protocol(GFP), Virtual Concatenations (VCAT),and Link Capacity Adjustment Scheme

(RPR) technology to provide highreliable and efficient data transport withQoS control

Management Features

Speedy operation and maintenancethrough local craft terminal FLEXR LService Provisioning Platform (MSPP)

series provides telecommunicationcarriers and service providers with apowerful solution to survive their fiercelycompetitive industry.

Integrating reliable and intelligent SDHfunctionality and efficient Ethernetaggregation and switching into acompact body, the FLASHWAVE 4x70MSPP bl b th t diti l i

y j(LCAS) functions for dynamicbandwidth allocation, adjustments, andprotection

Non-blocking, large-capacityswitching matrix that’s optimal for metroaggregation as well as core networks;340G for high-order VC and 40G forlow-order VC The FLASHWAVE 4570 is an STM-64

MSPP optimi ed for Metro Aggregation

through local craft terminal FLEXR L

Network element and sub-network-based management system FLEXR CR3, to enable seamless managementof all SDH, PDH, and Ethernet layers

MSPP enables both traditional voice-based services and increasingly diversedata services to be delivered over aunified optical network.

Enriched with next-generation SDHfunctionality, the FLASHWAVE 4x70MSPP allows carriers to not only simplifytheir network, but also to efficiently,flexibly, and dynamically use network

Small Form-factor Pluggable (SFP)interfaces to deliver optical rate andparameter flexibility on a per-port basis

MSPP optimized for Metro Aggregationand Core network applications.

Typical node configurations are:

2 x STM-64, 8 x STM-1e(1:N), 1 x10GE (Transparent), 8 x GE(Transparent), 8 x STM-4, 504 x E1,2GE + 12FE (RPR), 2 x STM-16subtending rings in single shelfconfigurationy, y y

bandwidth with a simple managementprocedure. In this way, theFLASHWAVE 4x70 MSPP helps tosatisfy the growing end-user’s demand inan increasing variety of broadbandservices at a substantially reduced cost.

configuration

Multiple STM-N with direct E1, FE,GE, and 10GE

High-Capacity Metro Core Solution

Technical Specifications

Applications

Terminal multiplexer

Hardware Protection

STM-1E card: 1:N (N=1 to 4)

Power

Input voltage: -48 VDC

Linear add-drop multiplexer

Ring add-drop multiplexer

DXC

Traffic Interfaces

STM-64 (L-64.2, S-64.2, SR-1)

STM-16 (L-16.2, L-16.1, S-16.1,

E3/DS3 card: 1:N (N=1 to 4)

E1 card: 1:N (N=1 to 4)

HOCC/LOCC cards: 1+1

Mapping

G.7041/Y.1303 GFP-F / GFP-T

G.7042 LCAS: VC-12, VC-3, VC-4

Power consumption: approx. 1200 W

Mechanical Specifications

Sub-rack size: 500W x1068H x 278D mm

Installation: Standard ETSI rack

Environment

Operating temperature: -5 to 45 ºCnarrowband)

STM-4 (V-4.2, L-4.2, L-4.1, S-4.1)

STM-1 (V-1.2, L-1.2, L-1.1, S-1.1, electrical)

E3/DS3

E1 (75 ohms/120 ohms)

GE (1000Base T GE ZX GE E GE LX

G.707 VCAT: VC-12, VC-3, VC-4

Synchronization

Internal clock: Stratum 3 clock

Timing Source: External clock (2 Mbps, 2 MHz), SDH line, E1

Operation: Free-running, hold-over, locked mode

p g p

Start-up temperature: 0 to 45 ºC

Management

Local provisioning and maintenance by FLEXR L local craft terminal

Remote centralized management at both element and network level by FLEXR C R3 Sub-Network Management (SNM) GE (1000Base-T, GE-ZX, GE-E, GE-LX,

GE-SX, transparent or L2 switching)

FE (10/100Base-TX, transparent or L2 switching)

10GE

Optical amplifier: Post-amp (13 dBm, 15 dBm, 18 dBm output), pre-amp (20 dB gain)

locked-mode

Priority and quality (SSM) synchronization algorithms

Ethernet Feature

Layer 2 forwarding at wire-speed

Layer 2 switching and aggregation

802.1Q VLAN and stackable VLAN

g ( )

SNMPv3 standard MIB

Cross-Connect

HO capacity: 340 Gbps (2176 x 2176 VC-4)

LO capacity: 40 Gbps (16218 x 16218 VC-12)

Connection: Unidirectional, bidirectional, broadcast, drop and continue, loopback

Q

802.3x flow control

MAC Address self-learning

Layer 2 multicast (static provisioned or IGMP snooping)

Rate-limiting per port and/or VLAN

802.1p QoS/CoS per port and/or VLAN

Network Protection

1+1 and 1:N (N=1 to 14) MSP at STM-1, STM-4, STM-16, and STM-64

2-fiber MS-SPRing at STM-4, STM-16, and STM-64

SNCP/I and SNCP/N for VC-12, VC-3, VC-4, VC-4-4c and VC-4-16c

802.1w Rapid Spanning Tree Protocol (RSTP)

802.17 Resilient Packet Ring (RPR)

Specifications are subject to change without notice. For the latest detailed information, please contact your nearest local Fujitsu representative.

All brand names and product names are trademarks of their respective holders.

,

GMPLS/ASON ready (Future release)

802.17 RPR High-Capacity Metro Core Solution

© FUJITSU LIMITEDAll right reserved

April 2010

HB1054-4

FUJITSU LIMITEDFor further information please contact:

Global Telecom Sales Division1-17-25, Shinkamata, Ota-ku,

Tokyo 144-8588, Japan

http://www.fujitsu.com/telecom/