FUEL SERVICING-AUTOMATIC MODE
Connect static ground wires. Connect fuel hoses. Open fuel hose
nozzle valves at fuel control station.. Test quantity and high
level systems. Select desired total fuel load on pre-selector.
Ensure that refuel/defuel valve selectors are at normal guarded
position. . Center tank control handle to "ON".. Fuel control
selector to refuel. . Activate deadman control.. Monitor fuel
gages.
All tanks are filled simultaneously. The valves will close
automatically as the desired quantity is reached.
. Release deadman control.
. Fuel control selector to "OFF".
. Center tank control handle to "OFF". . Secure panel door.
Close nozzle valves, disconnect hoses, install adapter caps.
Disconnect static ground wires.
FUEL SERVICING-MANUAL MODE
Connect static ground wires. Connect fuel hoses. Open fuel hose
nozzle valves at fuel control station.
. Test quantity and high level systems
. Lift guard on refuel/defuel valve selectors and place in open
position . Center tank control handle to "ON".. Fuel control
selector to refuel.. Activate deadman control.. Monitor fuel gages
and place valve switches to "SHUT" as desired quantity in each tank
is reached. . Release deadman control.. Fuel control selector to
"OFF".. Center tank control handle to "OFF". . Secure panel
door.
Close nozzle valves, disconnect hoses, install adapter caps.
Disconnect static ground wires.
DEFUELING
- Connect static ground wires, connect fuel hoses, open fuel
hose nozzle valves.- At fuel control panel:
. Test quantity and high level systems
. Place refuel/defuel valve selectors in "OPEN" position .
Center tank control handle to "ON". Fuel control selector to
defuel
- Apply defuel suction, transfer valve handle to open- Boost
pumps-On (optional) increases defuel rate (this is preferred
method)- Monitor fuel gages, close valve switches when desired fuel
level is reached in each tank.
