Upload
others
View
11
Download
0
Embed Size (px)
Citation preview
Optimal Fuel Quality Reliable Power Supply Keeps the Lights On
ALGAE-X International
Fuel OptimizationSystems & Equipment Catalogue
STS Automated Fuel Filtration Systems Page 4
SMART FPS Fuel Polishing & Transfer Systems Page 8
MTC Mobile Tank Cleaning Systems Page 12
AFC Fuel Catalyst Page 17
LG-X In-Line Fuel Conditioners Page 18
SMART Filtration Controllers Page 20
Filters, Separators & Coalescers Page 22
Filter Reference Chart Page 26
Fuel Sampling & Testing Page 28
AXI Equipment Specs and Prologue Page 30
When the Lights Go Out……it’s Too Late to Clean Your Tanks
Most Emergency Power and Engine Performance failures start inthe Fuel Tank and are caused by the inherent instability of fuel.
Fuel degradation is a natural process that causes the formation of sediment, tank sludge and acid. It starts at the refinery and continues until the fuel has been used. Heat, pressure, temperature changes, water and microbial contamination accelerate the fuel breakdown process.
The mandated use of bio-fuels has caused a dramatic increase in fuel re-polymerization. This is causing rampant filter plugging, fuel injection system failures and a significant reduction of stored fuel shelf life.
Advancements in engine and injection system design demand perfect fuel. However, changes in fuel production methods combined with the use of bio-fuels are seriously endangering engine performance and the reliability of critical power. Traditionally, the solution has been to periodically replace stored fuel and clean tanks. This is a very expensive and partial solution at best.
AXI provides equipment based on its unique and innovative approach to fuel quality optimization, maintenance and tank cleaning to improve the stability, filtration and combustion of fuel.
Implementing AXI’s Green Clean Certified® equipment and fuel maintenance programs will eliminate the need for periodically cleaning tanks and replacing fuel. Optimizing and maintaining fuel quality preserves its integrity. It extends filter change intervals, protects engines and injection systems and reduces harmful emissions.
AXI Fuel Quality Optimization, Maintenance & Tank Cleaning provideReliability and Protection of Engines & Turbines far beyond traditional filtration & separation.
Keeping the Lights On 555
Programmable Automated Fuel Filtration SystemSTS 6000 Programmable Automated Fuel Filtration Systems are self-contained, stand-alone systems that remove and prevent the buildup of water, sludge and contaminants in fuel systems.
The STS Series is equipped with remote-ready, programmable SMART Filtration Controllers to seamlessly integrate with building management systems. Installed in a “Fuel dialysis loop,” STS Systems stabilize the fuel, eliminate microbial contamination and permanently preserve fuel integrity to assure peak engine performance and reliable power whenever it is needed.
Optimal Fuel QualityReliable Power Supply
Keeps the Lights On
• UL508a SMART Filtration Controller• Unique Alarm & Remote Monitoring• NEMA Certified Powder Coated Cabinet• Continuous-Duty Pump with Viton Seals• Stainless Steel Plumbing• Stand Alone, Reliable & Turn-Key
6 Automated Fuel Filtration Systems
Flow Rate 150 GPH
Primary Filter/Water Separator 10 or 30 µ Fine Filter or60 µ Stainless Steel Screen
Fuel Conditioner LG-X 500
Smart Filtration Controller SFC-50
Pump Internal Gear Pump
Power 110V 60Hz 15A or 230V 50Hz 15A
Plumbing Stainless Steel
Ports In 3/4” NPT Out 1/2” NPT
Weatherproof Cabinet NEMA 12, 13, 4 Powder Coat or Stainless
Dimensions 35” x 24” x 10” (89 x 61 x 25 cm)
Weight ≈ 135 lbs
STS 6000-SX
Flow Rate 4 GPM 4 GPM
Primary Filter/ Water Separator
80 Mesh SS Screen or 16 µ Particulate or 15 µ Water Block
10 or 30 µ Particulate or 60 µ SS Screen
Secondary Filter/ Water Separator
10 µ Fine Filter or 3 µ Water Block
10 µ Fine Filter or 3 µ Water Block
Fuel Conditioner LG-X 1500 LG-X 1500
Smart Filtration Controller
SFC-4G SFC-4G
Pump Internal Gear Pump Internal Gear Pump
Power 110V 60Hz 15A or 230V 50Hz 15A
110V 60Hz 15A or 230V 50Hz 15A
Plumbing Stainless Steel Stainless Steel
Ports In 3/4” NPT Out 3/4” NPT In 3/4” NPT Out 3/4” NPT
Weatherproof Cabinet NEMA 12, 13, 4 Powder Coat or Stainless
NEMA 12, 13, 4 Powder Coat or Stainless
Dimensions 36” x 36” x 12” (91 x 91 x 30 cm) 36” x 36” x 12” (91 x 91 x 30 cm)
Weight ≈ 200 lbs ≈ 200 lbs
STS 6000-4 GPM STS 6000-4 GPM-SFlow Rate
Primary Filter/Water Separator
Secondary Filter/Water Separator
Fuel Conditioner
Smart Filtration Controller
Pump
Power
Plumbing
Ports
Weatherproof Cabinet
DimensionsSTS 6000-4 GPM-S
AXI works with and supports A&E firms, OEMs, Contractors, Installers and Facility Managers to design and build custom systems for specific applications.
Touch screen display HMI controllers with a variety of communication protocols are optional on AXI’s STS-6000 Series of Automated Filtration Systems.
µ = Microns
7Keeping the Lights On
Flow Rate 30 GPM
Primary Filter/Water Separator 1, 5, 10 or 25 µ Particulate or Coalescing
Secondary Filter/Water Block/Coalescer
1, 5, 10 or 25 µ Particulate or Water Block
Fuel Conditioner LG-X 4000
Smart Filtration Controller SFC-30G
Pump Internal Gear Pump
Power 208-230V 60Hz 20A or230V 50Hz 15A
Plumbing Stainless Steel
Ports In 2” NPT Out 1.5” NPT
Weatherproof Cabinet NEMA 12, 13, 4 Powder Coat or Stainless
Dimensions 56” x 72” x 17” (142 x 183 x 43 cm)
Weight ≈ 688 lbs
STS 6000-30 GPMSTS 6000-4 GPM STS 6000-4 GPM-S
Flow Rate 10 GPM 10 GPM for Two Tanks
Primary Filter/Water Separator/ Coalescer
10 µ or 30 µ Fine Filter or60 µ Stainless Screen
10 µ or 30 µ Fine Filter or60 µ Stainless Screen
Secondary Filter/Water Block
10 µ Fine Filter or3 µ Water block
10 µ Fine Filter or3 µ Water Block
Fuel Conditioner LG-X 3000 LG-X 3000
Smart Filtration Controller SFC-10G SFC-10GT
Actuators & Solenoids N/A NEMA 4X, internal low power heater 24V DC
Pump Internal Gear Pump Internal Gear Pump
Power 110V 60Hz 20A or230V 50Hz 15A
110V 60Hz 20A or230V 50Hz 15A
Plumbing Stainless Steel Stainless Steel
Ports In 1” NPT Out 1” NPT In 1” NPT Out 1” NPT
Weatherproof Cabinet NEMA 12, 13, 4 Powder Coat or Stainless
NEMA 12, 13, 4 Powder Coat or Stainless
Dimensions 37” x 60” x 12”(94 x 152 x 30 cm)
37” x 82” x 12” (94 x 208 x 30 cm)
Weight ≈ 400 lbs ≈ 400 lbs
STS 6000-10 GPM STS 6000-10 GPM-2T
STS 6000-10 GPM
Flow Rate Up to 35 GPM utilizing submersible pumps
Primary Filter/Water Block/ Coalescer
1, 5, 10 or 25 µ Particulate, Water Block or Coalescing
Secondary Filter/Water Block Dual 1, 3, 10 or 25 µ
Fuel Conditioner LG-X 4000
Smart Filtration Controller SMART PLC Controller
Pump Utilizes Existing Tank Pump
Power 120V 60Hz 20A
Plumbing Stainless Steel
Ports 1.5” NPT In/Out
Weatherproof Cabinet NEMA 12, 13, 4 Powder Coat or Stainless
Dimensions 42” x 68” x 14” (107 x 176 x 36 cm)
Weight ≈ 404 lbs
STS 6000-P35
µ = Microns
SMART Fuel Polishing & Transfer Systems8
Programmable Fuel Maintenance
Remote Monitoring and Control
Unique Safety & Alarm Features
Programmable Fuel Maintenance
Keeping the Lights On 9
SMART Fuel Polishing SystemsSmart FPS fuel polishing systems are programmable, fully automated Fuel Optimization Systems, which removewater, sludge and contaminants. SmartFPS systems condition and stabilize fuel,keeping it dry and free from microbial contamination.
Smart FPS systems keep your tanks clean and your fuel in “Clear & Bright” pristine condition at all times, preventing clogged filters, extending injection system service life, and reducing smoke, emissions and downtime.
SMART FPS Standard Models Feature:• SFC-50 Smart Filtration Controller• Fully Automated & Programmable• Integrates with Vessel Monitoring Systems• Modular “Plug & Play” Flexibility• Unique Safety & Alarm Features• Continuous-Duty Pumps, Viton Seals
FPS systems condition and stabilize fuel,
pristine condition at all times, preventing clogged filters, extending injection system service life, and reducing smoke, emissions and downtime.
SMART FPS Standard Models Feature:
• Integrates with Vessel Monitoring Systems
clogged filters, extending injection system service life, and reducing smoke, emissions and downtime. service life, and reducing smoke, emissions and downtime.
SMART FPS systems fit neatly inside standard emergency generator enclosures. They have been proven to significantly reduce operating costs and the frequency of technicial service visits.
Generators and pumps operating in remote locations are ideal applications for our SMART FPS Systems to guarantee continuous, uninterrupted service.
10 SMART Fuel Polishing & Transfer Systems
AXI works with and supports naval architects, boat builders and owners with custom engineering for fuel system design and layout
Flow Rate 150 GPH 150 GPH
Primary Filter/Water Separator
10 µ, 30 µ Particulate Racor Particulate 10 µ, 30 µ
Fuel Conditioner LG-X 500 LG-X 500
Smart Filtration Controller SMART FPS System Monitor SMART FPS System Monitor
Power 12V DC / 24V DC 10A 5A 12V DC / 24V DC 10A 5A
Ports 1/2” 37° Flare Connectors 1/2” 37° Flare Connectors
Plumbing Stainless Steel Stainless Steel
Construction Powder Coated Aluminum Back Plate
Powder Coated Aluminum Back Plate
Dimensions* 20” x 17” x 8” (51 x 43 x 20 cm) 28” x 17” x 8” (71 x 43 x 20 cm)
Weight 30 lbs 32 lbs
FPS FX FPS FX-R
SMART FPS FX
Flow Rate 80 GPH 80 GPH 80 GPH
Primary Filter/Water Separator
15 µ Water Block10 µ Particulate
15 µ Water Block10 µ Particulate
15 µ Water Block10 µ Particulate
Fuel Conditioner LG-X 500 LG-X 500 LG-X 500
Smart Filtration Controller Analog SMART FPS System Monitor
SMART FPS System Monitor with Leak Detector
Power 12V DC / 24V DC5A
12V DC / 24V DC5A
12V DC / 24V DC5A
Ports 1/2” Hose Barb 1/2” Hose Barb 1/2” Hose Barb
Plumbing Stainless Steel Stainless Steel Stainless Steel
Construction Powder Coated Aluminum Back Plate
Powder CoatedAluminum Back Plate
Powder CoatedAluminum Back Plate
Dimensions 15” x 18.5” x 7.5” (38 x 47 x 19 cm)
15” x 18.5” x 7.5” (38 x 47 x 19 cm)
15” x 18.5” x 7.5” (38 x 47 x 19 cm)
Weight 20 lbs 20 lbs 20 lbs
FPS DX FPS DX-D FPS DX-LD
SMART FPS DX-LD
µ = Microns*FPS FX-R requires additional headroom to change filters.
Flow Rate 150 GPH 150 GPH
Primary Filter/Water Separator
10, 30 µ Particulate Racor Particulate 10, 30 µ
Fuel Conditioner LG-X 1500 LG-X 1500
Smart Filtration Controller SFC-50 SFC-50
Pump 1/3hp Internal Gear Pump 1/3hp Internal Gear Pump
Power 110V 60Hz or 230V 50Hz 15A
110V 60Hz or 230V 50Hz 15A
Ports 3/4” 37° Flare In1/2” 37° Flare Out
3/4” 37° Flare In1/2” 37° Flare Out
Plumbing Stainless Steel Stainless Steel
Construction Powder Coated Aluminum Back Plate
Powder Coated Aluminum Back Plate
Dimensions* 21” x 18” x 9”(53 x 46 x 23 cm)
29” x 18” x 9”(74 x 46 x 23 cm)
Weight 57 lbs Sys. 10 lbs SFC-50 50 lbs Sys. 10 lbs SFC-50
Flow Rate 250 GPH 250 GPH
Primary Filter/Water Separator
Separ 10, 30 µ Separ 10, 30 µ
Secondary Filter N/A 10 µ Particulate 3 µ Water Block
Fuel Conditioner LG-X 1500 LG-X 1500
Smart Filtration Controller SFC-50 SFC-50
Pump 1/3hp Internal Gear Pump 1/3hp Internal Gear Pump
Power 110V 60Hz or 230V 50Hz 15A
110V 60Hz or 230V 50Hz 15A
Ports 3/4” 37° Flare In3/4” 37° Flare Out
3/4” 37° Flare In3/4” 37° Flare Out
Plumbing Stainless Steel Stainless Steel
Construction Powder Coated Aluminum Back Plate
Powder Coated Aluminum Back Plate
Dimensions 22” x 20” x 9”(56 X 51 X 23 cm)
23” x 26” x 9”(58 X 69 X 23 cm)
Weight 60 lbs Sys. 10 lbs SFC-50 70 lbs Sys. 10 lbs SFC-50
Flow Rate 600 GPH 600 GPH
Primary Filter/Water Separator
Separ 10, 30 µ Separ 10, 30 µ
Secondary Filter N/A 1, 3, 10 or 25 µ Fine Filter3 or 10 µ Waterblock
Fuel Conditioner LG-X 3000 LG-X 3000
Smart Filtration Controller SFC-55 SFC-55
Pump 1hp Internal Gear Pump 1hp Internal Gear Pump
Power 110V 60Hz or 230V 50Hz 20A
110V 60Hz or 230V 50Hz 20A
Ports 1” 37° Flare Male Connectors
1” 37° Flare Male Connectors
Plumbing Stainless Steel Stainless Steel
Construction Powder Coated Aluminum Back Plate
Powder Coated Aluminum Back Plate
Dimensions 26” x 34” x 12” Sys.13.4” x 16” x 7.4” Ctl.
26” x 34” x 12” Sys.13.4” x 16” x 7.4” Ctl.
Weight 200 lbs Sys. 15 lbs SFC-55 200 lbs Sys. 15 lbs SFC-55
FPS SX FPS SX-R
FPS MX FPS MX-F
FPS LX FPS LX-F
11Keeping the Lights On
Flow Rate
Primary Filter/Water Separator
Secondary Filter
Fuel Conditioner
Smart Filtration Controller
Pump
Power
Ports
Plumbing
Construction
Dimensions
SMART FPS SX
SMART FPS MX-F
SMART FPS LX-F
*FPS SX-R requires additional headroom to change filters
Keeping the Lights On 13
Mobile Tank CleaningMTC tank cleaning and fuel restoration systems clean tanks while reconditioning, stabilizing and decontaminating diesel, biofuels, light oils and hydraulic fluids.
MTC systems remove water, sediment and sludge that naturally form and accumulate in tanks. They are compact, heavy-duty, multi-stage industrial systems for long-term reliable service. MTC systems clean tanks and restore fuel to its “Clear & Bright” pristine condition without anyone having to enter the tank.
• Multi-Stage Tank Cleaning• Compact Industrial Design• Minimal Consumables Wasted• Negligible Fuel Loss• Low Operating Costs• No Tank Entry Needed
• Multi-Stage Tank Cleaning• Multi-Stage Tank Cleaning• Compact Industrial Design• Compact Industrial Design• Minimal Consumables Wasted• Minimal Consumables Wasted• Negligible Fuel Loss• Negligible Fuel Loss• Low Operating Costs• Low Operating Costs• No Tank Entry Needed• No Tank Entry Needed
1313
AXI’s MTC Systems recondition, stabilize and decontaminate fuel while cleaning tanks.
MTCs are used in many applications around the world: transportation and heavy equipment, equipment service centers, generators, storage tanks, gas stations, oil rigs, fuel docks, marinas, tank and equipment rental companies.
14 Mobile Tank Cleaning Systems
Flow Rate 3 GPM
Filter 40, 80 mesh SS Screen or 10 µ Particulate or 15 µ Water Block
Pump Brass Gear Pump
Port Size 1/2”
Monitoring Pressure Gauge
Power Requirements 12V 10A or 24V 5A
Clear Vacuum Suction Hose 1/2”
Flexible HP Discharge Hose 1/2”
Fuel Conditioner LG-X 500
Dimensions (HxWxD) 14” x 13” x 4.25”(36 x 33 x 11 cm)
Weight (Approx.) 26 lbs (12 kg)
Plumbing Stainless Steel
TK 180-XT
Flow Rate 480 GPH Adjustable Flow Rate180-480 GPH
Separator Maintenance Free Centrifugal Water Separator/Coalescer
Maintenance Free Centrifugal Water Separator/Coalescer
Spin-on Final Filter 1, 3, 10 or 25 µ Fine Filter3 or 10 µ Water Block
1, 3, 10 or 25 µ Fine Filter3 or 10 µ Water Block
Fuel Conditioner LG-X 1500 LG-X 1500
Pump Self priming rotary vane pump with integrated adjustable bypass valve
Self priming gear pump with variable speed drive
Power 115V 60Hz or 230V 50Hz 15A 115V 60Hz or 230V 50Hz 15A
Ports 1” or 3/4” Quick Disconnect 3/4” Quick Disconnect
Clear Suction Hose 1” oil or 3/4” (diesel only), 25 ft 3/4”, 25 ft
Discharge Hose 3/4”, 25 ft 3/4”, 25 ft
Dimensions 48” x 22.5” x 25” (122 x 57 x 63 cm) 48” x 22.5” x 25” (122 x 57 x 63 cm)
Weight 140 lbs 150 lbs
MTC 500 MTC 500 AFR
Flow Rate 900 GPH 900 GPH
Separator Maintenance Free Centrifugal Water Separator/Coalescer
Maintenance Free Centrifugal Water Separator/Coalescer
Spin-on Final Filter 3, 10 or 25 µ Fine Filter3 or 10 µ Water Block
1, 3, 10 or 25 µ Fine Filter3 or 10 µ Water Block
Fuel Conditioner LG-X 3000 LG-X 3000
Pump Self priming rotary vane pump with integrated bypass valve & strainer
Self priming rotary vane pump with integrated bypass valve & strainer
Power 115V 60Hz 20A or 230V 50Hz 20A
115V 60Hz 20A or 230V 50Hz 20A
Ports 1” Quick Disconnect 1” Stainless Plumbing, Cam & Groove
Clear Suction Hose 1”, 25 ft 1”, 25 ft
Discharge Hose 1”, 25 ft 1”, 25 ft
Dimensions 48” x 22.5” x 25” (122 x 57 x 63 cm) 48” x 22.5” x 25” (122 x 57 x 63 cm)
Weight (Approx.) 160 lbs 160 lbs
MTC 1000 MTC 1000 LX
Before and After Fuel Samples from an Installation in Australia
MTC 500 AFR
MTC 1000 LX
µ = Microns
15Keeping the Lights On
Flow Rate 1560 GPH
Separator Maintenance Free Centrifugal Water Separator/Coalescer
Spin-on Final Filter 1, 3, 10 or 25 µ Fine Filter3 or 10 µ Water Block
Fuel Conditioner LG-X 3000
Pump Self priming rotary vane pump with integrated bypass valve & strainer
Power 115V 60Hz 20A or230V 50Hz 20A
Ports 1-1/2” In 1-1/4” Out, Cam & Groove
Clear Suction Hose 1-1/2”, 25 ft
Discharge Hose 1-1/4”, 25 ft
Dimensions 48” x 22.5” x 25” (122 x 57 x 63 cm)
Weight (Approx.) 200 lbs
MTC 3000
MTC Options:AXI customized Pre-FIlter Assemblies have a large contaminant holding capacity to save time and accelerate the cleaning of tanks with large amounts of sludge, rust, scale and sediments. They are equipped with a basket strainer that accommodates a variety of easy-to-replace filter bags from 1-1500 micron.
AXI Spill Containment Berms protect the environment and are industrial quality, easy to use and fold up for storage and transportation.
Call AXI for additional MTC Options: Fuel Sampling & Testing Equipment; Digital Flow Meters; Tank Access Plates; Fuel and Oil Absorption and Cleaning Products, and more.
AFC-705 Fuel Catalyst is an essential part of every tank cleaning procedure
AXI Spill Containment Berms protect the environment and are industrial quality, easy to use and fold up for storage and transportation.
Call AXI for additional MTC Options:Equipment; Digital Flow Meters; Tank Access Plates; Fuel and Oil Absorption and Cleaning Products, and more.
µ = Microns
16 High Capacity Mobile Tank Cleaning Systems
Flow Rate Adjustable Flow Rate 25-75 GPM (depending on air supply)
80 GPM
Primary Filter Carbon Steel Pre-Filter Housing, Quick Release 3-Bolt Swing Cover, Drain Valve & Air Vent, Perforated SS Strainer Basket 9/64” (3.5 mm) for use with Filter Bags
Carbon Steel Pre-Filter Housing, Quick Release 3-Bolt Swing Cover, Drain Valve & Air Vent, Perforated SS Strainer Basket 9/64” (3.5 mm) for use with Filter Bags
Liner & Filter Bags Replaceable Filter Bags 1-1500 µ Replaceable Filter Bags 1-1500 µ
Secondary Filter Carbon Steel Filter Housing, Quick Release 3-Bolt Swing Cover Drain Valve & Air Vent
Carbon Steel Filter Housing, Quick Release 3-Bolt Swing Cover Drain Valve & Air Vent
Filter Cartridges Particulate Filters 2-30 µWater Block Filters 5-30 µAbsolute Microglass Filters 3-10 µ
Particulate Filters 2-30 µWater Block Filters 5, 10, 30 µAbsolute Microglass Filters 3-10 µ
Water Separator RCM 1500 with Drain Valve & Air Vent RCM 1500 with Drain Valve & Air Vent
Fuel Conditioner LG-X 4000 LG-X 4000
Smart Filtration Controller
SFC-50MTC (optional) SFC-55HC
Instrumentation & Automation
Vacuum Gauges on Primary FilterPressure Gauge on Pump DischargePressure Gauges on Secondary FilterAXI Watect 550 Water Sensor Alarm Module (optional)
Vacuum Gauges on Primary FilterPressure Gauge on Pump DischargePressure Gauges on Secondary FilterAXI Watect 550 Water Sensor Alarm Module
PumpPower/Air Requirements
Adjustable Flow RateAir Driven, Double-Diaphragm Pump50 GPM - 25 cfm @ 90 psi70 GPM - 50 cfm @ 90 psi1/2” Air Hose Connection
2HP Self-Priming Centrifugal Pump208/230V 60Hz 20A2” Ports (NPT)Viton Seals
Ports One Suction, Multiple Discharge & Sample Ports One Suction, Multiple Discharge & Sample Ports
Connectors Cam & Groove Fittings and Covers Cam & Groove Fittings and Covers
Hoses 2”, 25 ft Clear Suction Hose 2”, 25 ft Discharge Hose
2”, 25 ft Clear Suction Hose 2”, 25 ft Discharge Hose
Skid Powder Coated Carbon SteelLifting Eyes & Forklift ChannelsDrip Tray with Drain
Powder Coated Carbon SteelLifting Eyes & Forklift ChannelsDrip Tray with Drain
Dimensions* 36” x 45” x 58” (91 x 114 x 147 cm) 36” x 45” x 58” (91 x 114 x 147 cm)
Weight 500 lbs (227 kg) 563 lbs (255 kg)
MTC HC-50 MTC HC-80MTC HC-50
High Capacity Mobile Tank Cleaning Systems
µ = Microns
17Keeping the Lights On
ALGAE-X Fuel CatalystAFC-705 Fuel Catalyst is a unique and powerful, broad-spectrum fuel additive concentrate for use in Diesel, Biofuels, Gasoline, Kerosene and HFO. Including AFC as part of your preventative fuel maintenance program, in combination with good housekeeping, will stabilize your fuel, prevent sludge build-up and eliminate the need for expensive and toxic biocides.
Using AFC accelerates tank cleaning and fuel restoration processes. It enhances the breakdown and removal of sludge, slime and bio-fouling from tank walls and baffles that are difficult to access. AFC effectively decontaminates and cleans the entire fuel and injection system and continues to work in storage tanks, cleaning and stabilizing fuel for 6 months or longer.
• Cleans Fuel, Storage Tanks & Injection Systems• Improves Combustion, Lowers Emissions & Fuel Consumption• Removes & Prevents Carbon Build Up & Corrosion• Adds Lubricity and Inhibits Corrosion• Extends Lube Oil & Equipment Life• Optimizes Engine, Generator & Boiler Efficiencies• Reduces Harmful Emissions, Soot & Particulates
(CO, HCs, NOX, SOX, VOCs, Carbonyls, PAH)
Active Ingredients Combustion Catalyst, Surfactant,Dispersant Corrosion Inhibitor,Lubricity Enhancer
Treatment Ratio 1:5000
8oz Bottle 320 Gallons
1 Gallon Jug 5,000 Gallons
5 Gallon Jug 25,000 Gallons
55 Gallon Drum 275,000 Gallons
AFC-705
AFC cleans the entire fuel system, enhances combustion and prevents injection system failures.
AFC-705 Fuel Catalyst is an essential part of every tank cleaning procedure.
Available in 8oz, 1 Gal., 5 Gal., and 55 Gal. sizes.
AFC-705 Fuel Catalyst is an essential part of every tank cleaning procedure.
In-Line Fuel Conditioners18
CertainTeed Gypsum saves thousands on filters and downtime by installing ALGAE-X Fuel Conditioners in their Tier II and Tier III mining equipment.
CertainTeed Gypsum saves thousands on filters and downtime by installing ALGAE-X Fuel Conditioners in their Tier II and Tier III mining equipment.
Keeping the Lights On
Most engine failures start in the tankDiesel engines take more fuel out of the tank than is needed for combustion. Fuel is continuously cycled from the tank through filtration and separation to the engine, returning most of the fuel back to the tank. In 24/7 applications, one would think continuously moving fuel would result in spotless tanks, but this is not the case.
LG-X In-Line Fuel ConditionersDiesel, biofuels, kerosene, gasoline, hydraulic fluid and oil are inherently unstable organic hydrocarbon fluids that naturally break down. The resulting sediments, acids and tank sludge clog filter elements and corrode injection systems.
• Improve Fuel Stability, Filtration and Combustion• Clean Fuel Injection Systems, Filters and Tanks• Lower Harmful Emissions and Fuel Consumption• Eliminate and Prevent Carbon Deposits• Reduce Maintenance & Downtime• Increase Safety and Reliability• Lower Operating Cost
Fuel filters should last thousands of hours.However, frequent filter changes, tank cleaning and replacing fuel have become commonplace periodic maintenance practices instead of being serious warning signals for potentially expensive downtime, power failures and liabilities.
Fuel conditioners immediately extend filter life and clean the total fuel system by returning clean, conditioned fuel to the tank whenever the engines or pumps are running. They protect the injection system and extend engine life.
AXI fuel conditioners stabilize and condition fuels by reducing the size and mass of clusters of fuel molecules. In combination with primary filter water separators, fuel conditioners prevent fuel degradation and microbial contamination. They optimize fuel quality, keep tanks clean and protect engines.
19
Port Size (NPT/BSP) 1/4” 1/2” 3/4” 1” 1-1/2 / 2”
Max Flow Rate 1-25 GPH (3.8-95 lph)
20-110 GPH(76-416 lph)
50-350 GPH(189-1325 lph)
200-800 GPH(757-3028 lph)
1500 / 2500 GPH(5678 lph / 9464 lph)
Weight 1 lb(.45 kg)
2 lb(.9 kg)
3.5 lb(1.6 kg)
7.5 lb(3.4 kg)
27 / 35 lb(12 kg / 16 kg)
HP Range 200 500 1500 3000 3000 (and up)
Lifetime Warranty
LG-X Model 200 500 1500 3000 4000/5000
Smart Filtration Controllers and Alarm Module20
Water Sensor Alarm ModuleWATECT 550 is a micro-controller based water detection alarm module. The unique and proprietary measuring method utilized by the WATECT 550 eliminates electrolytic probe corrosion and works with common water probes and sensors.
The module is protected against reverse polarity, over-voltge, over-current and has safe recovery from power interruption. Its potential-free SPDT relay output controls N.O. and N.C. contacts up to 250V/3A. The compact, flanged housing is environmentally sealed and can be used in harsh environments.
Power ● Red 12V-24V DC● Black Ground (-)
Weight 5 oz (142 g)
Dimensions 2.75” x 2” x 1.5” (7 x 5 x 4 cm)
Output Signal
Input Signal:
● Blue N.O.● Yellow N.C.● Green Common
White Sensor (2)
WATECT 550
SMART FPS DX-LDDigital Programmable Interface
with Leak Detection, High Vacuum and Pressure Detection, Power
Indicator and Alarm Reset
SMART FPS DX Manual Programmable Interface with High Vacuum and Pressure
Detection, Power Indicator and Alarm Reset
SMART FPS DX-D Digital Programmable Interface with High Vacuum and Pressure
Detection, Power Indicator and Alarm Reset
Smart Filtration ControllersAXI’s STS, FPS and HC series of fuel filtration, optimization, maintenance and tank cleaning systems are equipped with PLC-based programmable UL 508A SMART Filtration Controllers with text rea-dout. The controller’s alarm functions and pump shut-down are triggered if filter elements require service, if a leak is detected, if high pump vacuum or pressure occurs, if system flow rate varies or if there is water in the separator.
For systems servicing multiple tanks, Smart Filtration Controllers operate solenoid valves and pro-tect tanks from overfilling. The SFC series controllers seamlessly interface with customers’ BMS/BAS to indicate alarm status and control and monitor system operation.
Touch screen display HMI controllers with a variety of communication protocols are optional on AXI’s STS-6000 Series of Automated Filtration Systems.
Power 115V 60Hz230V 50Hz
115V 60Hz230V 50Hz
24V DC
Weight 10 lbs (5 kg) 15 lbs (6.8 kg) 8 lbs (4 kg)
Dimensions 12” x 10” x 6”(30 x 25 x 15 cm)
13.4” x 16” x 7.4”(33 x 41 x 19 cm)
12” x 10” x 7.5”(30 x 25 x 19 cm)
Indicator Lights ● Power (Green)● Pump Running (Orange)● Alarm (Red)● Alarm Reset (Blue)
● Power (Green) ● Pump Running (Orange)● Alarm (Red)● Alarm Reset (Blue)
● Power (Green)● High Volume (Red)● High Water Left Filter (Red)● High Water Right Filter (Red)● Alarm Reset (Blue)
Keeping the Lights On 21
SFC-50 SFC-55 RMS-60
AXI works with and supports clients, architects and engineering firms, OEM’s and facility management companies, to design and custom
engineer innovative, automated fuel optimization, maintenance, transfer and tank cleaning systems for their specific applications.
SFC-55SFC-50
Filters, Separators and Coalescers22
AXI® offers a variety of Standard and Custom Engineered Filtration and Water Separation Equipment. Please contact AXI for high capacity, custom engineered fuel conditioning, filtration and transfer equipment.
Flow Rate 120 GPM 150 GPM 300 GPM 500 GPM
In/Out connections 2” NPT 2” NPT 3” Flanged 4” Flanged
Filter Elements Fine Filters 1-100 µWater Block Filters1-100 µ
Fine Filters 1-100 µWater Block Filters1-100 µ
Fine Filters 1-100 µWater Block Filters1-100 µ
Fine Filters 1-100 µWater Block Filters1-100 µ
Filter Elements Required 1 2 4 8
Vent Port 1/4” NPT 1/4” NPT 1/2” NPT 1/2” NPT
Drain Port 2” NPT 2” NPT 1” NPT 1” NPT
Gauge Ports 2 x 1/4” NPT 2 x 1/4” NPT 2 x 1/4” NPT 2 x 1/4” NPT
Dimensions(LxWxH)
12 x 12 x 32.5”(30 x 30 x 82.5 cm)
12 x 12 x 50.5”(30 x 30 x 128 cm)
24 x 24 x 59”(60 x 60 x 150 cm)
28 x 28 x 78”(71 x 71 x 198 cm)
Weight (lbs) 110 lbs (50 kg) 130 lbs (59 kg) 480 lbs (218 kg) 590 lbs (268 kg)
High CapacityFilter Vessels
AXI® offers a variety of Standard and Custom Engineered Filtration and Water Separation Equipment. Please contact AXI for high capacity, custom engineered fuel conditioning, filtration and transfer equipment.
120 GPM 150 GPM 300 GPM 500 GPM
High CapacityFilter Vessels
MTC-3000, PF-30and Containment Berm
FV-120 FV-150 FV-300 FV-500
µ = Microns
Keeping the Lights On 23
MTC Connectivity MTC-500MTC-1000
MTC-3000 MTC-3000
Available Connections
Cam & GrooveQuick Disc
Cam & Groove Cam & Groove
Shut-Off Valves 1” 1.5” 1.5”
Flow Rate ( GPM) 50 GPM 220 GPM 220 GPM
Drain (NPT) 1/2” 1” 1”
Filter Elements 10-800 µ 10-800 µ 10-800 µ
Gauges Stainless Steel Liquid-Filled Vacuum Gauge
Stainless Steel Liquid-Filled Vacuum Gauge
Stainless Steel Liquid-Filled Vacuum Gauge
Dimensions(HxWxD)
26 x 19.5 x 5.5”(66 x 50 x 14 cm)
34.5 x 28 x 8.5”(88 x 71 x 22 cm)
40 x 28 x 8.5”(102 x 71 x 22 cm)
Weight (lbs) 16 lbs (7 kg) 45 lbs (20 kg) 122 lbs (51 kg)
Inlet & Outlet Ports (NPT)
2” 2” 2”
Drain (NPT) 3/4” 3/4” 3/4”
Flow Rate 66 GPM 133 GPM 200 GPM
Filter Elements 10-800 µ 10-800 µ 10-800 µ
Pressure & Temp 150 psi @ 250° F (10 bar @ 121° C)
150 psi @ 250° F (10 bar @ 121° C)
150 psi @ 250° F (10 bar @ 121° C)
Gauges Differential Pressure Gauge(optional)
Differential Pressure Gauge(optional)
Differential Pressure Gauge(optional)
Dimensions(HxWxD)
35.3 x 13.5 x 13”(90 x 34 x 33.5 cm)
50 x 13.5 x 13”(126.5 x 34 x 33.5 cm)
64 x 13.5 x 13”(162 x 34 x 33.5 cm)
Weight (lbs) 100 lbs (45 kg) 115 lbs (52 kg) 130 lbs (59 kg)
Inlet & Outlet Ports (NPT) 2” 2” 2”
Drain (NPT) 3/4” 3/4” 3/4”
Flow Rate 25 GPM 50 GPM 75 GPM
Filter Elements 10-800 µ 10-800 µ 10-800 µ
Pressure & Temp 150 psi @ 250° F (10 bar @ 121° C)
150 psi @ 250° F (10 bar @ 121° C)
150 psi @ 250° F (10 bar @ 121° C)
Gauges Differential Pressure Gauge(optional)
Differential Pressure Gauge(optional)
Differential Pressure Gauge(optional)
Dimensions(HxWxD)
35.3 x 13.5 x 13”(90 x 34 x 33.5 cm)
50 x 13.5 x 13”(126.5 x 34 x 33.5 cm)
64 x 13.5 x 13”(162 x 34 x 33.5 cm)
Weight (lbs) 100 lbs (45 kg) 115 lbs (52 kg) 130 lbs (59 kg)
Particulate Filter Vessel
Pre-Filter Assemblies
Filter/Water Separator Vessel
RVMF-1 RVMF-2 RVMF-3
RVFS-1 RVFS-2 RVFS-3
PF-10 PF-30 PF-30HD
PF-10 PF-30 PF-30HD
RVMF-1 RVMF-2 RVMF-3
RVFS-1 RVFS-2 RVFS-3
µ = Microns
Filters24
Max Flow Rate 79 GPH (300 lph) 158 GPH (600 lph) 285 GPH (1080 lph) 630 GPH (2400 lph)
In & Out Port 3/4” - 16 UNF 7/8” - 14 UNF 1-1/16” - 12 UNF 1-5/16” - 12 UNF
Pressure Drop at Max Flow 0.53” Hg (18 mbar) 0.31” Hg (11 mbar) 0.44” Hg (15 mbar) 0.95” Hg (32 mbar)
Filtration 10/30 µ 10/30 µ 10/30 µ 10/30 µ
Dimensions (HxWxD) 11.5 x 5.5 x 3.7”(293 x 140 x 93 mm)
13 x 6 x 4”(330 x 146 x 107 mm)
15 x 8 x 6.5”(385 x 200 x 165 mm)
19 x 11.5 x 8”(480 x 290 x 21 mm)
Space for Element Change 2.4” (60 mm) 2.4” (60 mm) 2.4” (60 mm) 2.4” (60 mm)
Dry Weight 4 lbs (1.8 kg) 5 lbs (2.3 kg) 11 lbs (5 kg) 24 lbs (11 kg)
In & Out Port 1.25” #20 JIC, 37° Flare
Flow Rate (GPH) 600
Sensors Watect 550 (2)
Dimensions 24 x 32 x 20” (61 x 81 x 51 cm)
Weight (lbs) 85 lbs (38 kg)
SEPAR SWK 2000-40UM
1.25” #20 JIC, 37° Flare
Monitoring Redundant Prime Power FiltrationThe RMS-60 line of programmable Smart Filtration Controllers monitor Primary Power Filtration systems when redundant filtration is a necessity and downtime is unacceptable. The RMS-60 will provide advance warning to the operator to switch filters to keep mission-critical equipment running at all times.
The RMS-60 integrates seamlessly with BMS/BMA for onsite and remote monitoring of dual, primary filtration. Remote Filtration Monitoring Systems prevent unexpected downtime caused by water or sudden filter plugging. The color coded panel lights on the controller give an instant status report on system power and on alarms for high vacuum and high water level in filter separator bowls.
2000/5 2000/10 2000/18 2000/40MK
Dual Full Flow Switchable Separ Fuel Filter/Water Separators with RMS-60 SMART Filtration Controller
µ = Microns
Keeping the Lights On 25
Max Flow Rate 60 GPH (227 lph) 90 GPH (341 lph) 180 GPH (681 lph)
In & Out Port 3/4” - 16 UNF (16 mm x 1.5) 7/8” - 14 UNF (22 mm x 1.5) 7/8” - 14 UNF (22 mm x 1.5)
Pressure Drop at Max Flow 0.25 psi 1.72 kPa 0.34 psi 2.4 kPa 0.49psi 3.4 kPa
Filtration 2, 5, 10, 30 µ 2, 5, 10, 30 µ 2, 5, 10, 30 µ
Dimensions (HxWxD) 11.5 x 5.8 x 4.8”(292 x 147 x 122 mm)
17 x 5.6 x 6”(432 x 152 x 178 mm)
22 x 5.6 x 7”(559 x 152 x 178 mm)
Space for Element Change 4” (102 mm) 5” (127 mm) 10” (254 mm)
Dry Weight 4 lbs (1.8 kg) 6.5 lbs (3 kg) 10 lbs (4.5 kg)
Max Flow Rate (Filter/WB) 18 GPM (38 GPM) 25 GPM (95 GPM)
In & Out Port 1.5” NPT 1.5” NPT
Filtration 1, 5, 10 or 25 µ Micro Filter, Water Block or Coalescing
1, 5, 10 or 25 µ
Dimensions (HxWxD) 16.5 x 8.6” (42 x 22 cm) 20.5 x 8.6” (52 x 22 cm)
Space for Element Change 2.4” (60 mm) 2.4” (60 mm)
Dry Weight 5 lbs (2.3 kg) 11 lbs (5 kg)
High capacity FBO filters are used in a variety of primary and secondary industrial filtration applications. They are available with cellulose, micro-glass and coalescing elements.
AXI represents a full line of marine and industrial filters.
High capacity FBO filters are used in a variety of primary and secondary industrial filtration applications. They are available with cellulose,
500MA 900MA 1000MA
FBO-10 FBO-14
26 Systems & Filter Elements Reference Chart
SMART FPS FUEL POLISHING SYSTEMSHIGH PERFORMANCE CARTRIDGE FILTERS HIGH PERFORMANCE SPIN ON FILTERS
10 µ
15 µ Water Block 30 µ
60 µ SS
Screen
80 Mesh 178 µ
SS Screen
40 Mesh 380 µ
SS Screen
1 µ B100 & All Bio 3 µ
3 µ Water Block 10 µ
10 µ Water Block 25 µ
X-Glass 3 µ
AbsoluteSmart FPS DX-D TK-081 TK-082 TK-084 TK-083
Smart FPS FX 01010 01030 01060S
Smart FPS FX-R 2020TM-OR 2020PM-OR
Smart FPS SX 01010 01030 01060S
Smart FPS SX-R 2020TM-OR 2020PM-OR
Smart FPS MX 01810 01830 01860S
Smart FPS MX-F 01810 01830 01860S WBS-3 FFS-10
Smart FPS LX 04010 04030 04060S
Smart FPS LX-F 04010 04030 04060S FF-1 FF-3 WB-3 FF-10 WB-10 FF-25 FFZ-3
FPS-500 01010 01030 01060S
FPS-500A 01010 01030 01060S
FPS-550A 2020TM-OR 2020PM-OR
FPS-750 01810 01830 01860S
FPS-750A 01810 01830 01860S
TC 1000 FF-1 FF-3 WB-3 FF-10 WB-10 FF-25 FFZ-3
TC 3000 FF-1 FF-3 WB-3 FF-10 WB-10 FF-25 FFZ-3
MICRON TO MESH TABLEMicron 1 2.5 3 5 10 12 20 25 37 44 53 63 74 105 125 149 177 210 250 297 354 420
Mesh 12000 5000 4800 2500 1250 1200 625 550 400 325 270 230 200 140 120 100 80 70 60 50 45 40
STS AUTOMATED FUEL FILTRATION SYSTEMSHIGH PERFORMANCE CARTRIDGE FILTERS HIGH PERFORMANCE SPIN ON FILTERS
10 µ
15 µ Water Block 30 µ
60 µ SS
Screen
80 Mesh 178 µ
SS Screen
40 Mesh 380 µ
SS Screen
1 µ B100 & All Bio 3 µ
3 µ Water Block 10 µ
10 µ Water Block 25 µ
X-Glass 3 µ
AbsoluteSTS 6000 - SX 01010 01030 01060S
STS 6000 - 4 GPM TK-081 TK-082 TK-084 TK-083 WBS-3 FFS-10
STS 6000 -4 GPM-S 01810 1830 01860S WBS-3 FFS-10
STS 5000 -10 GPM 04010 04030 04060S FF-1 FF-3 WB-3 FF-10 WB-10 FF-25 FFZ-3
STS 6000 -10 GPM 04010 04030 04060S FF-1* FF-3* WB-3* FF-10* WB-10* FF-25* FFZ-3*
* NOTE: STS 6000 - 10 GPM Requires 2 each of the same cartridge
1 MICRON 5 MICRON 10 MICRON 25 MICRONSTS 6000 -30 GPM FBO-60339 Micro Filter FBO-60340 Micro Filter FBO-60357 Micro Filter FBO-60341 Micro Filter
FBO-60342 Water Block FBO-60343 Water Block FBO-60358 Water Block FBO-60344 Water Block
FBO-60336 Coalescing FBO-60337 Coalescing FBO-60356 Coalescing FBO-60338 Coalescing
µ = Microns
µ = Microns
Keeping the Lights On 27
FILTER BAGS FOR PRE FILTERS, HC50 AND HC80 1 µ 5 µ 10 µ 25 µ 75 µ 250 µ 800 µ 1500 µ
PF-10* PFB-10-1 PFB-10-5 PFB-10-10 PFB-10-25 PFB-10-75 PFB-10-250 PFB-10-800 PFB-10-1500
PF-30* PFB-30-1 PFB-30-5 PFB-30-10 PFB-30-25 PFB-30-75 PFB-30-250 PFB-30-800 PFB-30-1500
PF-30/HD* PFB-30-1 PFB-30-5 PFB-30-10 PFB-30-25 PFB-30-75 PFB-30-250 PFB-30-800 PFB-30-1500
MTC HC50* PFB-30-1 PFB-30-5 PFB-30-10 PFB-30-25 PFB-30-75 PFB-30-250 PFB-30-800 PFB-30-1500
HIGH CAPACITY TANK CLEANING SYSTEMS & FILTER VESSELSCF SERIES ELEMENTS FOR MTC-HC AND FV SERIES FE SERIES ELEMENTS FOR MTC- HC AND FV SERIES
5 µ 10 µ
5 µ Water Block
10 µ Water Block 2 µ 10 µ 30 µ
10 µ Water Block
30 µ Water Block
Micro Gl3 µ
Absolute
Micro Gl5 µ
Absolute
Micro Gl 10 µ
AbsoluteMTC-HC-50* CF618-5 CF618-10 CFWB618-5 CFWB618-10 FE-30066 FE-30008 FE-30009 FE-30034 FE-30037 FE-30204 FE-30203 FE-30202
MTC-HC-80* CF 618-5 CF618-10 CFWB618-5 CFWB618-10 FE-30066 FE-30008 FE-30009 FE-30034 FE-30037 FE-30204 FE-30203 FE-30202
FV-120* CF 618-5 CF618-10 CFWB618-5 CFWB618-10 FE-30066 FE-30008 FE-30009 FE-30034 FE-30037 FE-30204 FE-30203 FE-30202
FV-150** CF 618-5 CF618-10 CFWB618-5 CFWB618-10 FE-30066 FE-30008 FE-30009 FE-30034 FE-30037 FE-30204 FE-30203 FE-30202
FV-300*** CF 618-5 CF618-10 CFWB618-5 CFWB618-10 FE-30066 FE-30008 FE-30009 FE-30034 FE-30037 FE-30204 FE-30203 FE-30202
FV-500**** CF 618-5 CF618-10 CFWB618-5 CFWB618-10 FE-30066 FE-30008 FE-30009 FE-30034 FE-30037 FE-30204 FE-30203 FE-30202
MOBILE TANK CLEANING SYSTEMSHIGH PERFORMANCE CARTRIDGE FILTERS HIGH PERFORMANCE SPIN ON FILTERS
10 µ
15 µ Water Block 30 µ
60 µ SS
Screen
80 Mesh 178 µ
SS Screen
40 Mesh 380 µ
SS Screen
1 µ B100 & All BioFuels 3 µ
3 µWater Block 10 µ
10 µWater Block 25 µ
X-Glass 3 µ
AbsoluteTK-180-XT TK-081 TK-082 TK-084 TK-083
MTC-350 01810 01830 01860S
MTC-500 FF-1 FF-3 WB-3 FF-10 WB-10 FF-25 FFZ-3
MTC-500-AFR FF-1 FF-3 WB-3 FF-10 WB-10 FF-25 FFZ-3
MTC-1000 FF-1 FF-3 WB-3 FF-10 WB-10 FF-25 FFZ-3
MTC-1000-LX FF-1 FF-3 WB-3 FF-10 WB-10 FF-25 FFZ-3
MTC-3000 FF-1 FF-3 WB-3 FF-10 WB-10 FF-25 FFZ-3
µ = Microns
µ = Microns
µ = Microns
FILTER TYPESWATER BLOCKPrevent free, dissolved and emulsified water from passing through the filter. Water absorbing polymers trap water and remove it from fuel.
MICRO GLASSInorganic fibers capable of capturing and retaining up to 400 times more than traditional filter elements providing nearly 5 times the lifespan of traditional filters.
X-GLASSX-Glass Microglass filters are designed for extreme dirt-holding capacity and lower pressure drop over traditional microglass media. Designed for systems that require high dirt-holding capacity filtration and longer filter change intervals.
COALESCINGCoalescing filters strip suspended water from fuel.
MICRON SIZE RELATIVITYHuman Hair 80 µ
Damaging to Fuel Systems 5-10 µ
StandardFiltration 15 µ
High Efficiency Filtration 2 µ
Fuel Testing28
Monitoring fuel integrity is an essential part of all fuel maintenance programsFuel degradation is an unavoidable, costly, natural process, until we implement adequate fuel quality maintenance equipment, effective “housekeeping” and a fuel sampling and testing program. In every tank, fuel will continuously deteriorate forming sediment and acid. This process cannot be stopped by simply using filters and a separator. The installation of AXI Fuel Conditioners and Fuel Optimization equipment is the only way to assure fuel integrity at all times.
Fuel deterioration and microbial contamination result in an expensive loss of product in fuel storage tanks and negatively impacts engine and generator performance and reliability. Implementing a fuel quality sampling, testing and monitoring program is a must because hospitals, data centers, telecommunications and first responders require a 0% failure rate to eliminate liabilities and loss of life.
The National Fire Protection Association states in NFPA 110 Standard for Emergency and Standby Power Systems that: “fuel maintenance and testing should begin the day of installation.”
AXI works with established fuel testing and research labs to support customers in developing fuel maintenance and testing programs to ensure that fuel in pristine condition at all times.
Keeping the Lights On 29
Microbial Contamination Testing Kits are excellent tools to monitor aerobic bacteria, anaerobic bacteria, fungus, yeast, mold and microbial activity. They easily demonstrate and quantify bacterial contaminant growth in fuels and other fluids.
Water Finding PasteKolor Kut paste is amber in color and changes to a brilliant red when exposed to water. It is a simple tool to check for the presence of water in:• Gasoline • Kerosene• Diesel • Heavy Fuel Oil
Capacity 4 oz (120 ml) 4 oz (120 ml) 8 oz (237 ml) 8 oz (237 ml) 16 oz (473 ml) 16 oz (473 ml)
Material Plated Brass Stainless Steel Plated Brass Stainless Steel Plated Brass Stainless Steel
Dimensions 1-7/8” x 9-11/16” 1-7/8” x 9-11/16” 2-5/16” x 10-5/32” 2-5/16” x 10-5/32” 2-3/4” x 12-1/32” 2-3/4” x 12-1/32”
Weight 4 lbs 4 lbs 5 lbs 5 lbs 9 lbs 8 lbs
FS200 FS205 FS210 FS215 FS220 FS225
Bacon BombThe Sample Thief or “Bacon Bomb” is an industrial strength device used to take fuel samples from the bottom of storage tanks. The device has a plunger locking cam assembly which opens either with a trip line or extension rod to take samples at different levels in the tank or when the plunger hits the bottom of the tank. It closes and seals tightly when withdrawing. Larger sizes are available.
The Fuel Sampling Pump KitAn excelent tool to easily obtain fluid samples while keeping your hands clean. The kit contains a Hand Pump and uses flexible 1/4” tubing and see-through treated bottles. The pump protects against cross contamination by drawing fluids directly into the bottle and can be used for fuels, oil, hydraulic fluids, coolant, water and other liquids.
FS100 Fuel Sampling Hand Pump with 4 oz sample bottles.
Use with FS120 tubing and FS110 or FS116 sampling bottles
4 oz (120 ml) plastic bottles with 33 mm thread to attach to pump
16 oz (473 ml) plastic bottles with 33 mm thread to attach to pump
1/4” clear suction tubing in 100 ft lengths
FS100 FS110 FS116 FS120
6000-SX • • • • 150 3/4” in 1/2” out AC 6A
6000-4 GPM • • • • 240 3/4” AC 6A
6000-4 GPM S • • • • 240 3/4” AC 6A
6000-10 GPM • • • • 600 1” AC 13A
6000-10 2T • • • • 600 1” AC 13A
6000-30 GPM • • • • 1800 2” in 1.5” out AC 9.2A
SMART-DX • • • 80 1/2” DC 5A
SMART-DX-D • • • 80 1/2” DC 5A
SMART-DX-LD • • • • 80 1/2” DC 5A
SMART FX • • • • • 150 1/2” DC 10A
SMART FX-R • • • • • 150 1/2” DC 10A
SMART SX • • • • • 150 3/4” X 1/2” AC 6A
SMART SX-R • • • • • 150 3/4” X 1/2” AC 6A
SMART MX • • • • • 250 3/4” AC 6A
SMART MX-F • • • • • 250 3/4” AC 6A
SMART LX • • • • • 600 1” AC 13A
SMART LX-F • • • • • 600 1” AC 13A
TK 180-XT • • • 180 1/2” DC 10A
500 • • • • 480 1” X 3/4” AC 10A
500-AFR • • • • 180-480 3/4 AC 10A
1000 • • • • 900 1” AC 8A
1000-LX • • • • 900 1” AC 8A
3000 • • • • 1500 1.5” X 1.25” AC 10A
HC-50 • • • • 4500 2” Air N/A
HC-80 • • • • 4800 2” AC 10.8A
200 • 1-25 1/4” 200
500 • 20-110 1/2” 500
1500 • 50-350 3/4” 1500
3000 • 200-800 1” 3000
4000 • 1500 1.5” 3000+
5000 • 2500 2” 3000+
AXI In-Li
ne Fu
el Con
dition
er
On-Boa
rd Ta
nk C
leanin
g/Opt
imizin
g
Mob
ile Ta
nk C
leanin
g/Opt
imizin
g
Autom
ated
Sto
red F
uel F
iltrat
ion
Wat
er S
epar
ator
/Coales
cer
Partic
ulate
Filtr
ation
Flow R
ate (
GPH)
Port S
ize
Power
Sou
rce
Full L
oad A
mps
HP Ran
ge (u
p to)
STS
MODEL
FPS
MTC
LG-X
PLEASE NOTE: The above recommendations are general sizing guidelines, valid for most environments. However, there are many conditional and applicaton variations that can alter the appropriate solution. AXI Sales Engineers are experts at assisting you in proper selectiona nd custom adaptations. Contact us for free engineering support & consultation.
Full product specifications and CSI specs are available at www.AXIFuelConditioning.com
MODEL
AXI Equipment Specs
Company DesignationsDUNS: 957070386CAGE: 1L608NAICS: 325199, 325998, 333298, 333911, 339999
Notable ClientsAllegheny PowerToronto Children’s HospitalGeneral DynamicsUnion PacificNobel EnergyU.S. EmbassiesU.S. Dept. of TransportationD.O.D.Alaska Power & TelephoneMiami-Dade TransitSNC LavelinHH AngusJones Lang LaSalleCable BahamasVerizonAmwayOffice Depot
Dealers & Distributors of Major Engine ManufacturersDetroit Diesel - MTUCumminsCaterpillar
Memberships
Separation
Fuel Conditioning
Filtration
AXI Keeps the Lights On…… wherever fuel is being used and stored
and fuel quality is critically important.
AXI specializes in designing, engineering and manufacturing fuel filtration, maintenance, transfer and tank cleaning equipment. This catalogue provides information on our standard fuel optimization systems, equipment and products. Customized systems can be designed to meet your specifications.
Whenever and wherever fuel is being used or stored for future emergencies, AXI’s engineered systems and equipment provide the solutions needed to protect engines and maintain the reliability of critical power. Applications range from single engine, generator or pump systems to fuel conditioning equipment for power plants, refineries and tank facilities.
In addition to the equipment and products in this catalogue, AXI offers engineered solutions for: • Liquid fuel unloading equipment for tanker trucks and trains• Liquid fuel and gas filtration vessels and skids• Liquid and gas separation equipment• Liquid fuel conditioning equipment• Liquid fuel forwarding skids• Oil-water separators
For HFO applications in turbines, engines and boilers, AXI offers Sludge Reduction and Combustion Improvement equipment to comply with increasingly stringent disposal and emissions regulations.
Key Industries:• Prime & Emergency Power Generation• Commercial, Military & Recreational Marine• Mining, Construction, Agriculture & Heavy Equipment• Transportation, Rail & Automotive
ALGAE-X International
www.AXIFuelConditioning.com
MEMBER
™
AXI designs and manufactures standardized and custom-engineered Automated Fuel Conditioning, Fuel Polishing and Transfer Systems, Tank Cleaning Equipment, Fuel Additives and In-line Fuel Conditioners to ensure optimal fuel quality at all times.
Our scope of expertise covers fuel storage and fuel supply systems from single engine installations to power plants. AXI is your single source for all fuel conditioning related equipment and support available world-wide.
• Peak Engine Performance
• Reliable Power Supply
• Lower Maintenance Costs
• Lower Exhaust Emissions
Read about the secret life of fuel and find solutions in the AXI Brochure, available at www.AXIFuelConditioning.net.
Distributed Bywww.AXIFuelConditioning.net.
©Copyright 2011 ALGAE-X International
ALGAE-X Internationalw w w . A X I F u e l C o n d i t i o n i n g . c o m
ALGAE-X International5400-1 Division DrFort Myers, FL 33905 1 877-425-4239+1 239-690-9589
ALGAE-X International