FSS BW Operations - Load Monitoring Document

8/22/2019 FSS BW Operations - Load Monitoring Document

1/13

Stepwise Document for Load Monitoring Failures

Document Version / Dtails : Ver 1.0 / 24-AUG-08

Record Of Release

Version No.

Created /ModifiedBy

ReviewedBy

Release Date Modifications Done

1.0 MugdhaSawant

SachinTamhane

03/01/2011

Project ID: E6806 Project Name: FSS BW Operation


2/13

Document Title:Stepwise Document for Load Monitoring Failures

PM-03-04

Ver 1.0/14-Aug-08

Page 2 of 13

Scope of Document: This document helps us understand the steps to be followed incase weencounter a failure in the daily load monitoring process.

Steps:

Step1: The Identification of a chain failure would be done through the program /SSA/BWTthrough which we monitor all the chains.

Step2: If the chain fails, go to the process chain and identify the failed process type

Step3: Right Click on the failed process type and read the error message. Incase of load

failures, if the display messages is not comprehensible, then go to the process monitor of thatparticular failed load and try to analyze the issue in the details tab.

Given below are a few examples of failures that are commonly encountered on dailybasis:

1) Changerun Failure: If you receive any of the below errors:


3/13


PM-03-04

Ver 1.0/14-Aug-08

Page 3 of 13

Please refer the below document :

Attribute ChangeRun.doc


4/13


PM-03-04

Ver 1.0/14-Aug-08

Page 4 of 13

2) Invalid character when loading the data:

From this error message it is not clear what the error is, hence we have to go to theprocess monitor for understanding in detail


5/13


PM-03-04

Ver 1.0/14-Aug-08

Page 5 of 13


How to resolveInvalid Characters Er


6/13


PM-03-04

Ver 1.0/14-Aug-08

Page 6 of 13

3) Datasource replication:


DatasourceReplication.doc


7/13


PM-03-04

Ver 1.0/14-Aug-08

Page 7 of 13

4) Locked by other Objects:


Locked by Other

Process.doc

5) Error 7 in the update:


8/13


PM-03-04

Ver 1.0/14-Aug-08

Page 8 of 13

Please refer the below document:

Error 7 in update.doc

6) Memory Allocation Issue:

Please refer the below document:

Memory AllocationIssue.doc

After taking the corrective action if you have repeated the process chain then theChain would move ahead once the failed process type is successfully completed.However if you have taken manual action on the failed process type then youhave to force green the failed process type by following the below steps

Step1: Right click on the failed process type and go to the display messages


9/13


PM-03-04

Ver 1.0/14-Aug-08

Page 9 of 13

Step2: Note down the Instance and the variant,


10/13


PM-03-04

Ver 1.0/14-Aug-08

Page 10 of 13

Incase if either of the two(Instance/variant) are missing then note down the Job countnumber.


11/13


PM-03-04

Ver 1.0/14-Aug-08

Page 11 of 13

Step3: Go to table rspcprocesslog in SE16 and enter the instance and variant takenfrom the previous step


12/13


PM-03-04

Ver 1.0/14-Aug-08

Page 12 of 13

Step4: Display the table entry

Step5: Go to function module RSPC_PROCESS_FINISH and execute


13/13


PM-03-04

Ver 1.0/14-Aug-08

Page 13 of 13

Step6: Enter the Login ID, Type, Variant and instance obtained from SE16 and makethe state as G

Step7: Execute the function Module

The chain would be moved ahead successfully

Documents

FSS BW Operations - Load Monitoring Document