FSN-1004Fixed Configuration Multi-format presentation switcher

Anything in, anything outThe FSN-1004 is a fixed configuration, fully integrated multi-screen presentation system that simplifies system interconnections, setup and control while providing advanced features for presentations with up to four independent screens. With the flexible input and output capability, the FSN-1004 operates as a powerful multi-channel “anything in, anything out” system.

Ten universal input sources Featuring five universal input cards, the FSN-1004 enables the users to select up to ten input sources from a wide range of video and computer formats. Each input source is processed independently and can be any analog computer or video signal on HD-15 connectors, DVI signals on DVI-I connectors and SD/HD/3G video on BNC connectors. A custom algorithm allows the FSN-1004 to automatically and rapidly lock to the selected input video source. For genlocked sources, the delay through each scaling channel is one frame.

Four universal and six native outputs The FSN-1004 includes four scalable output channels each capable of running at different formats and resolutions. Each channel is provided in the DVI, Analog, SMPTE 3G/HD/SD SDI, or BarcoLink formats and can be vertically locked to the system’s internal sync, or free-run. The output formats are selected from a wide range of video and computer standards available within the system. The FSN-1004 also includes six outputs running at the system’s native resolution available on BNC connectors. Users can select the native outputs to be 720p, 1080p or BarcoLink (1200p).

Multiviewer The multiviewer (MVR) is a fully integrated monitoring solution that enables you to monitor up to 16 video inputs and/or outputs, eliminating the need for an external multiviewer and signal distribution devices. In addition to video sources, the MVR can also display a real-time clock (RTC) or timecode from the MVR card’s LTC input connector.

Simple setup and control The FSN-1004 is controlled from an intuitive graphical user interface running on a PC or Mac for simple setup, adjustment and control. As it can store up to 1000 memory registers (including information on sources, destination effects and transition rates), complex control sequences during live events are simplified. Based on the FSN-1400, the FSN-1004 can be upgraded to the full FSN system.

Features

Processing• Fast source acquisition• Swift and seamless switching• Preset recall from Encore• Advanced Athena scaling technology

Inputs• 10 scalable 3G/HD/SDI SDI, universal analog

or DVI inputs• Color correction for each input• Size and position adjustments• LOS (loss of signal) or invalid signal detection• Freeze

Outputs• 4 independent scalable outputs: 3G/HD/SD

SDI, analog, DVI or Barco link• Pan and zoom• 6 Native outputs: 3G/HD/SD SDI• Brightness, contrast, hue, saturation and

gamma correction• Internal test pattern• Flicker filter

Multiviewer• Up to 16 windows• Single or dual monitor configuration• Each output includes 1xDVI and 1xSDI

Other• Hot-swappable active cards and fan tray• Dual redundant power supply (optional)

Universal Input Card (UIC)

The Universal Input Card (UIC) is a high- performance dual-channel scaling processor that accepts a wide range of video and computer signals, and converts them to the switcher’s native format. Each channel operates independently.

The FSN-1004 is pre-configured with five UIC cards, allowing up to ten universal, non-native input signals to be scaled. Each channel accepts analog RGBHV/RGBS/RGsB, YPbPr video, S-video, Composite input signals on HD-15 connectors, DVI digital signals on DVI-I connectors and SD/HD/3G video on BNC connectors.

A custom algorithm allows each channel to automatically and rapidly lock to the selected input video source. For genlocked sources, the delay through each scaling channel is one frame.

In addition, the UIC provides the following video processing features per input channel:

• Freeze• Input size and position adjustments • Brightness and contrast adjustment• Hue, saturation• Independent RGB contrast and brightness adjustment• Gamma adjustmenst • Scaler sharpness control • Powerful de-interlacing modes: - Motion adaptive - Field to frame (for low latency) - pSF (Frame-to-Frame) - 3:2 (NTSC) and 2:2 (PAL) pull-down detection• 12-bit processing • Output black on LOS (loss of signal) or invalid signal• Flicker filter

Multiviewer Card (MVR)

The Multiviewer card provides a fully integrated monitoring solution, eliminating the need for multiple monitors and signal distribution, simplifying your system’s operation and reducing the overall operating cost. The Multiviewer enables you to monitor up to 16 video signals, comprised of any input source, any Program, Preview or Clean feed output, and any Aux bus output.

In addition to video sources, the Multiviewer can also display a real-time-clock (RTC) or timecode from the MVR card’s LTC input connector.

The Multiviewer operates in either single or dual monitor modes. In single mode, up to 16 PIPs can be displayed on a single monitor. In dual mode, the 16 PIPs are distributed between two DVI-D and HD-SDI monitor outputs. Over 20 different layouts are available, designed to fit any monitoring requirement.

Once a layout is selected, you can customize the text, background, border and UMD color. Any PIP can be turned off, and the overall layout’s background color, border color, and UMD (Under Monitor Display) color are all variable. The Multiviewer provides standard red/green tally within the UMD, and PIP borders automatically turn red to indicate loss-of-signal (LOS) or cyan when the corresponding input source is frozen. Just like all FSN cards, the Multiviewer card is hot-swappable, allowing for quick and easy extraction and insertion, without disturbing the system operation.

FSN-150, FSN-1400 & touch panel FSN-1004 & GUIInputs/outputs Universal inputs Up to 10 10

Native inputs Up to 16 N/ADedicated DSK inputs Yes N/AUniversal outputs Up to 4 4Native outputs Up to 30 6M/E PRG/PVW/CLEAN outputs Yes N/ANative output formats SMPTE plus 1200p (BarcoLink) 720p,1080p,1200p (BarcoLink)

Features Full screen outputs Yes YesPicture-in-Picture (PIPs) Up to 4 N/AKeying Yes N/A

Control RCP-120 control Yes N/AFSN-150 control panel Yes N/ATouch panel display Yes N/AGUI (PC or MAC) N/A Yes

Other Multiviewer Yes YesRedundant power supplies Yes YesHot swappable cards Yes Yes

Mixer

Mixer

ScalerProgram

Program

Program

Preview

Preview

Program

CH1

CH1

SOC

Scaler

M/E Mixer Mode: PGM/PVW M/E Mixer Mode: MixerEach M/E BNC corresponds to a program output

The M/E BNCs correspond to three (3) pairs of program / preview outputs

Previews are viewed only with the multiviewer

Previews are available on BNC connectors or can be viewed in the multiviewer

Six (6) Program outputs are available

Three (3) Program outputs are available

M/E transitions support only cuts M/E transitions support mix or cutsAll outputs run at the same resolution

(720p,1080p, 1200p (BarcoLink) @ 50/60 Hz)

Each UOC channel can be independently defined to include a mixer before the scaler. In the diagram below both channels are defined with a mixer, but a combination of a mixer and non-mixer configurations is also allowed. The mixers support cut and dissolve transitions. The preview inputs to the mixers can be viewed with the Multiviewer card prior the transition.

Standard Output Card (SOC)

The Standard Output Card (SOC) is a high- performance dual channel scaler card that enables the FSN to output DVI, Analog or SMPTE 3G/HD/SDI signals, independent of the switcher’s native video format.

Inputs to the SOC are internal, simplifying system setup and wiring. Two SOC cards are included with the FSN-1004 chassis, providing four independent outputs, each of which can output at a different format and resolution.

You can select the output format for each channel via the UOC setup menu, and all standard analog, DVI and SDI formats are available. In addition to standard formats, you can also output custom resolutions and timings, thus further enhancing the system’s “anything in, anything out” flexibility.

The SOC outputs can vertically genlock to the system’s internal sync, or free-run. For vertically locked outputs, the frame delay is one progressive frame for native progressive outputs.

System CardM/E Card

The FSN-1004 M/E card provides six AUX outputs running at 720p, 1080p or 1200p (BarcoLink). Internal test patterns can also be routed to any (or all) outputs.

The FSN-1004 ME card can be configured to operate in two modes: Program/Preview and Mixer mode. In the Program/Preview mode all six BNC connectors are configured as Program outputs. In the Mixer mode the six connectors are grouped as three pairs of Program and Preview outputs.

The Preview inputs to the mixers can be viewed with the Multiviewer card prior to the transition.

The System card provides the FSN’s reference timing signals, plus connections for GPIO and 24 Tally outputs. The Ethernet and serial communication connectors also reside on the card.

Three connections are provided for reference:

• Reference Input: The system accepts bi-level and black burst for SD, and tri-level for HD with status reporting. If the external video reference is lost, no visual artifacts on FSN video outputs will occur.

• Reference Output: The system outputs bi-level and black burst for SD, and tri-level for HD. The signal can be vertically locked to external video reference, or free run.

• Reference Loop: The looped reference input signal is present on the connector, even if the system card is removed.

M00451-R00-1112 November 2012Any item contained in this datasheet may change without notice.

www.barco.com/entertainment

VidEo iNPUTS

dVi • All single-link DVI digital formats up to 165 Mhz, per DVI 1.0 specification • EDID version 1 .3 compatible

Hd-15 VGA • Format: NTSC/PAL composite and Y/C video SD YPbPr with bi-level sync HD YPbPr with tri-level sync per SMPTE 274, RGBHV/RGBS/RGsB computer video with bi-level sync

• Sampling: sources with pixel rates up to 170 Mhz are sampled 1:1; sources with pixel rates above 170 Mhz are filtered and sampled at 170 Mhz, including but not limited to: 1920x1200p, 2048x1080p

• EDID version 1.3 compatible

Sd/Hd/3G Sdi • Formats: SD-SDI per SMPTE 259M-C (NTSC/PAL resolution); HD-SDI per SMPTE 292M, 296M; 3G-SDI per SMPTE 424M

VidEo oUTPUTS

dVi • Formats: all single-link DVI digital formats up to 165 Mhz, per DVI 1.0 specification

Hd-15 VGA • Formats: NTSC/PAL composite on green, NTSC/PAL Y/C video with bi-level sync on Y only, (Y: Green, C: Red); SD YPbPr with bi-level sync; HD YPbPR with tri-level sync per SMPTE 274; RGBHV/RGBS/RGsB computer video with bi-level sync

Sd/Hd/3G Sdi • Formats: SD-SDI per SMPTE 259M-C (NTSC/PAL resolution); HD-SDI per SMPTE 292M, 296M; 3G-SDI per SMPTE 424M

dVi (Multiviewer) • Formats: 1280x720p, 1366x768p, 1920x1080p, 1920x1200p

Sdi (Multiviewer) • 720p and 1080p

oTHER

Control Ethernet RJ-45, 10/100 Mbps autosense

Height 10.5 inches (26.67 cm) - 6 RU

Width 19.00 inches (48.26 cm)

depth 20.75 inches (52.70 cm)

Weight 58.0 lbs (26.5 kg)

input power 100-240 VAC, 50-60 Hz, 800 watts max. (each supply)

Environmental Humidity: 0-95% non-condensing

Temperature 0-40° C

Warranty Full three-year parts and labor warranty

Technical specifications

FSN-1004 application

11101 Trade Center Drive,Rancho Cordova, CA 95670, USA

T +1 916 859 2500 - F +1 916 859 2515

Barco nv Pres. Kennedypark 35, 8500 Kortrijk, Belgium

T +32 56 36 80 47 - F +32 56 36 83 86email: sales.events@barco.com

System Configuration

Card Name Slot Number

Universal Input Card (UIC) 3 through 7Mixer Effects (M/E) 8Multiviewer (MVR) 11Standard Output card (SOC) 12 & 13System 14

16 Window Multiviewer2 Outputs of DVI/SDI

10 Universal InputsEach supporting 3G/HD/3G

SDI, Analog or DVI

6 SDI Auxiliary outputs720p, 1080p, 1200p @ 50/60Hz

GUI Controlover Ethernet

from Mac or PC

4 Universal OutputsEach supporting 3G/HD/SD

SDI, Barcolink Analog or DVI at independent resolutions