Installation Guide Clearance •T emperature: 10 to 32.5 °C (50 to 90.5 °F) • Humid ity: 15 to 80 %RH • Power Supply: 120 V AC, 60 Hz, 7.7 A / 220 to 240 V AC, 50/60 Hz, 4 .3 A Environment Important: Do not install the printer where temperature or humidity is outside the recommended range. Print quality may suffe r and there will be an increased chance of paper jams. 300 mm (11-13/16") 100 mm (3-15/16") 200 mm (7-7/8") 600 mm (23-5/8") List of Shipped Components Installing the Toner Container and Waste Toner Box Open the top cover and remove the fixing tape. Take the toner container from the bag. 1 300 mm (11-13/16") Important: When carrying the printer, always hold the right and left sides as shown. Insert the protrusion at the left of the rear cover into the hole in the printer. The rear cover is fixed. 1 2 Installing the Rear Cover CAUTION: Be sure to provide enough space around printer. Prolonged use without sufficient clearance may cause overheating. Shake the new toner container at least 10 times as shown in the figure in order to distribute the toner evenly inside the container. 3 2 Install the toner container into the printer. 5 Push on the PUSH marks on the toner container until the container clicks into place. 6 Close the top cover. Open the cap of the waste toner box. 8 Open the left cover. 9 10 Close the left cover. 11 Carefully remove the printer and other items from the box. Check that nothing is missing against the list of shipped components. Make sure that the place of installation meets the following requirements. 1 3 2 Remove the label from the toner container. 4 Before you can use the printer for the first time, you must prepare it by installing the toner container and waste toner box. CD-ROM Manual and Other Printed Materials Rear Cover Printer Toner Container Waste Toner Box Plastic Waste Bag Language Label Sheet Attach the included language la bel sheet on the indicator as shown in the figure. Attaching the Label Power Cord FS-2020D/FS-3920DN/FS-4020DN Insert the protrusion at the right of the rear cover into the hole in the printer. 7 Insert the new waste toner box as shown in the figure. When the box is set correctly, it will snap into place.

FS2020D-3920DN-4020DNENII.pdf

Download PDF Report

Upload
pepeaav8469
View
224
Download
0

Embed Size (px)

Citation preview

7/27/2019 FS2020D-3920DN-4020DNENII.pdf

http://slidepdf.com/reader/full/fs2020d-3920dn-4020dneniipdf 1/2

Installation Guide

Clearance• Temperature: 10 to 32.5 °C (50 to 90.5 °F)• Humidity: 15 to 80 %RH• Power Supply: 120 V AC, 60 Hz, 7.7 A / 220 to 240 V AC, 50/60 Hz, 4.3 A

Environment

Important: Do not install the printer where temperature or humidity is outside therecommended range. Print quality may suffer and there will be an increased chance of paper

jams.300 mm

(11-13/16")

100 mm

(3-15/16")

200 mm

(7-7/8")

600 mm

(23-5/8")

List of Shipped Components

Installing the Toner Container and Waste Toner Box

Open the top cover and remove thefixing tape.Take the toner container from the bag.

300 mm(11-13/16")