7/28/2019 Front Page of Sundaramoorthy

1/4

TOOL RUN OUT DETECTION IN CNC MACHINES

Submitted in partial fulfillment of the requirements for the award ofBachelor of Engineering degree in Mechanical Engineering

by

SUNDARAMOORTHY.S (3045246)VIJAYAMUDHAN.E (3045273)

DEPARTMENT OF MECHANICAL ENGINEERING

SATHYABAMA UNIVERSITY

JEPPIAAR NAGAR, RAJIV GANDHI SALAI,

CHENNAI 600119,TAMILNADU.

SEPTEMBER 2013

7/28/2019 Front Page of Sundaramoorthy

2/4

SATHYABAMA

UNIVERSITY(Established under Section 3 of UGC Act, 1956)

JEPPIAAR NAGAR, RAJIV GANDHI SALAI, 600 119

www.sathyabamauniversity.ac.in

DEPARTMENT OF MECHANICAL ENGINEERING

BONAFIDE CERTIFICATE

This is to certify that this Project Report is the bonafide work ofSundaramoorthy.S(3045246),Vijayamudhan.E(3045273),who carried out the project

entitled TOOL RUN OUT DETECTION IN CNC MACHINES under my supervision

from June 2013 to September 2013.

Internal GuideMr. P.AMITH KISHORE, M.E.,

Head of the Department (Academics)Dr.A .KRISHNAMOORTHY, M.E., Ph.D.,

Submitted for Viva voce Examination held on_____________________

Internal Examiner External Examiner

7/28/2019 Front Page of Sundaramoorthy

3/4

DECLARATION

I Sundaramoorthy.S (3045246) hereby declare that the project entitled TOOL

RUN OUT DETECTION IN CNC MACHINESdone by me under the guidance of

Mr.P.Amith Kishore, M.E., Department of Mechanical Engineering is submitted in

partial fulfillment of the requirements for the award of Bachelor of Engineering

degree in Mechanical Engineering

DATE:

PLACE: Chennai SIGNATURE OF THE CANDIDATE

7/28/2019 Front Page of Sundaramoorthy

4/4