Freestanding Vintage Sewing Machine - Embroidery Online · 2017-06-28 · Freestanding Vintage Sewing Machine Handy Hints Drying: • Freestanding pieces look best when left to dry

Note: Some designs in this collection may have been created using unique special stitches and/or techniques. To preserve design integrity when rescaling or rotating designs in your software, always rescale or rotate designs using the handles directly on-screen.

It is a violation of Copyright law to make and distribute copies of electronic designs or artwork. Electronic designs are licensed to the original purchaser for use at one location. ©2017 OESD, LLC. All rights reserved.

Freestanding Vintage Sewing Machine#12698 / 14 Files / 1 Design

12698-01 Side 1 FSL4.80 X 7.41 in.

121.92 X 188.21 mm59,567 St.

12698-02 Side 2 FSL4.80 X 7.41 in.

121.92 X 188.21 mm59,469 St.

12698-03 End Piece FSL2.38 X 4.69 in.

60.45 X 119.13 mm27,096 St.

12698-04 Top & Inner Piece FSL2.50 X 6.76 in.

63.50 X 171.70 mm38,332 St.

12698-05 Head Piece FSL2.50 X 7.76 in.

63.50 X 197.10 mm46,041 St.

12698-06 Top Neck Piece FSL2.11 X 2.84 in.

53.59 X 72.14 mm14,735 St.

12698-07 Bottom Neck Piece FSL2.13 X 2.70 in.

54.10 X 68.58 mm12,388 St.

12698-08 Hand Wheel Connector FSL

1.10 X 3.98 in.27.94 X 101.09 mm

6,616 St.

12698-09 Hand Wheel FSL3.55 X 3.55 in.

90.17 X 90.17 mm28,899 St.

12698-10 Foot FSL1.58 X 1.93 in.

40.13 X 49.02 mm4,856 St.

12698-11 Base Top FSL4.50 X 8.50 in.

114.30 X 215.90 mm86,554 St.

12698-12 Base Walls FSL3.28 X 8.50 in.

83.31 X 215.90 mm63,235 St.

Note: Some designs in this collection may have been created using unique special stitches and/or techniques. To preserve design integrity when rescaling or rotating designs in your software, always rescale or rotate designs using the handles directly on-screen.

It is a violation of Copyright law to make and distribute copies of electronic designs or artwork. Electronic designs are licensed to the original purchaser for use at one location. ©2017 OESD, LLC. All rights reserved.

Freestanding Vintage Sewing Machine#12698 / 14 Files / 1 Design

12698-13 Base Walls 2 FSL3.26 X 4.42 in.

82.80 X 112.27 mm32,274 St.

12698-14 Base Floor FSA4.50 X 8.50 in.

114.30 X 215.90 mm26,540 St.

FSA - Freestanding Appliqué FSL - Freestanding Lace

Listings below indicate color sample, stitching order and suggested thread color number. Most numbers indicate Isacord thread. Colors beginning with 20501 refer to YLI Fine Metallics, 7 refer to Yenmet Metallic, 8 refer to YLI Variations Variegated Thread and 9 refer to Isacord Multicolor Variegated.

12698-01 Side 1 FSLn 1. Light Lace................................................................... 0132n 2. Dark Lace ................................................................... 0020n 3. Buttons/Loops and Satin Detail .................................. 0020

12698-02 Side 2 FSLn 1. Light Lace................................................................... 0132n 2. Dark Lace ................................................................... 0020n 3. Buttons/Loops and Satin Detail .................................. 0020

12698-03 End Piece FSLn 1. Light Lace................................................................... 0132n 2. Dark Lace ................................................................... 0020n 3. Buttons/Loops and Satin Detail .................................. 0020

12698-04 Top & Inner Piece FSLn 1. Light Lace................................................................... 0132n 2. Dark Lace ................................................................... 0020n 3. Buttons/Loops and Satin Detail .................................. 0020

12698-05 Head Piece FSLn 1. Light Lace................................................................... 0132n 2. Dark Lace ................................................................... 0020n 3. Buttons/Loops and Satin Detail .................................. 0020

12698-06 Top Neck Piece FSLn 1. Light Lace................................................................... 0132n 2. Dark Lace ................................................................... 0020n 3. Buttons/Loops and Satin Detail .................................. 0020

12698-07 Bottom Neck Piece FSLn 1. Dark Lace ................................................................... 0020n 2. Buttons/Loops and Satin Detail .................................. 0020

12698-08 Hand Wheel Connector FSLn 1. Dark Lace ................................................................... 0020n 2. Buttons/Loop and Satin Detail .................................... 0020

12698-09 Hand Wheel FSLn 1. Light Lace................................................................... 0132n 2. Dark Lace ................................................................... 0020n 3. Satin Detail ................................................................. 0020

12698-10 Foot FSLn 1. Dark Lace ................................................................... 0020n 2. Satin Detail ................................................................. 0020

12698-11 Base Top FSLn 1. Light Lace................................................................... 0132n 2. Dark Lace ................................................................... 0020n 3. Buttons and Satin Detail ............................................. 0020

12698-12 Base Walls FSLn 1. Light Lace................................................................... 0132n 2. Dark Lace ................................................................... 0020n 3. Buttons/Loops and Satin Detail .................................. 0020

12698-13 Base Walls 2 FSLn 1. Light Lace................................................................... 0132n 2. Dark Lace ................................................................... 0020n 3. Loops and Satin Detail ............................................... 0020

12698-14 Base Floor FSAn 1. Floor Placement Stitch ............................................... 0020n 2. Cut Line and Tackdown .............................................. 0020n 3. Cover Stitch and Detail .............................................. 0020

Isacord Thread Colors Used in “Freestanding Vintage Sewing Machine”Collection #12698

0020 Black 0132 Dark Pewter

It is a violation of Copyright law to make and distribute copies of instructions or artwork. Electronic designs are licensed to the original purchaser for use at one location. ©2017 OESD, LLC. All rights reserved.

InstructionsFreestanding Vintage Sewing Machine

Supplies:Embroidery Thread:• Usethesameembroiderythreadinthebobbinastheneedle.

Needles:• UseanOrgan80/12Titaniumneedleforextendedneedlelife.

Stabilizer:• Usewater-solublestabilizerorfilmwater-solublestabilizer.

Handy Hints:For Stiffer Lace:• DONOTrinseawayallofthestabilizerfora“stiffer”lace.Notethatthethreadmayappearashadedarkerifstabilizerisnotremovedcompletely.

• Ifyouhappentowashtoomuchout,easilyre-stiffenbydilutingsomestabilizerscrapsinwateranddippingtheiteminthesolution.

For Very Soft Lace:• Cutawayexcessstabilizer.Removeremainingstabilizerbyrinsingunderwarmrunningwateruntilalltracesofthestabilizeraregone.Note:Iflaceshouldbecometoolimptoworkwith,dissolvestabilizerscrapsinwarmwaterandapplytothelace.

Drying Lace:• Thelacelooksbestwhenlefttodrycompletely.Laylacepiecewithrightsidedowntodry.Thiswillminimizethetendencyforthelacetocurl.Besuretoflattenthepieceoutentirelyandallowampletimetodry.

General Freestanding Lace Guidelines

Diagram 1

Eyelet

Buttonette

General Instructions1.Hooptwolayersofwater-solublestabilizer.2.Attachthehooptothemachineandselectthedesignofyourchoice.

3.Stitchthedesign.4.Removethehoopfromthemachineandthedesignfromthehoop.Trimexcessstabilizerfromthedesign.

5.Rinseawayremainingstabilizerandallowittodry.

Handy Hints:For 3D Lace Projects:• Rinsingoutlacewithveryhotwatercancausewrinklesinsomefabricsafterithasbeenembroidered.Topreventthis,pre-shrinkcottonfabricbywashingitinwarmwateranddryingitinadryer.

• Ifitembecomestoolimptoworkwith,irontheappliquépiecesonthewrongsidewhileapplyingspraystarch.Afterironing,sprayagainwithstarchandallowtodrycompletely.Thiswillstiffenthelacepiecesnicelyandaidinconstruction.

• Apairoftweezers,hemostats,stilettooratinycrochethookcanbeextremelyhelpfulwheninsertingthebuttonettesintotheeyelets.(PleaseseeDiagram 1forexplanationof“buttonette”and“eyelet”.)

• Insertthetipofthetweezers,hemostatsorcrochethookintotheeyelet,graspthebuttonetteandpullthroughtheeyelet.Orastilettocouldbeusedtopushthebuttonettethroughtheeyelet.



Handy HintsDrying:• Freestanding pieces look best when left to dry with

right side down. This will minimize the tendency for a piece to curl. Be sure to flatten the piece out entirely and allow ample time to dry.

For 3D Appliqué Projects:• Adhere 1 layer of OESD StabilStick TearAway to the

back of appliqué fabrics with temporary adhesive spray BEFORE hooping or placing down for tackdown and cut in place. This gives fabric a more rigid structure.

• A pair of tweezers, hemostats, stiletto or a tiny crochet hook can be extremely helpful when inserting the buttonettes into the eyelets. (See Diagram 1 for explanation of “buttonette” and “eyelet”.)

• Insert the tip of the tweezers, hemostats or crochet hook into the eyelet, grasp the buttonette and pull through the eyelet. Or a stiletto could be used to push the buttonette through the eyelet.

Supplies:Embroidery Thread:• Use the same embroidery thread in the bobbin as the needle.

Needles:• Use an Organ 80/12 Titanium needle for extended needle life.

Stabilizer:• Use water-soluble stabilizer or film water-soluble stabilizer.

General Freestanding Appliqué Guidelines

Diagram 1 Eyelet

Buttonette

General Appliqué Instructions1. Hoop two layers of OESD AquaMesh Stabilizer.2. Attach the hoop to the machine and select the design of your

choice.3. Stitch the Placement Stitch. Photo 14. Place a piece of appliqué fabric over the Placement Stitch so

that it is completely covered.5. Stitch the Cut Line & Tackdown stitch. 6. Carefully cut away the excess appliqué fabric. Photo 27. Stitch the remainder of the design and repeat for any

remaining pieces. Photo 38. Remove the hoop from the machine and the design from the

hoop. 9. Trim excess stabilizer from the design.

10. Rinse away remaining stabilizer and allow it to dry face down to prevernt curling.

Appliqué

1 2 3



Vintage Sewing Machine - SummaryRequires 1 Side 1 FSL - 12698-01Requires 1 Side 2 FSL - 12698-02Requires 1 End Piece FSL - 12698-03Requires 1 Top & Inner Piece FSL - 12698-04Requires 1 Head Piece FSL - 12698-05Requires 1 Top Neck Piece FSL - 12698-06Requires 1 Bottom Neck Piece FSL - 12698-07Requires 1 Hand Wheel Connector FSL - 12698-08Requires 1 Hand Wheel FSL - 12698-09Requires 1 Foot FSL - 12698-10Requires 1 Base Top FSL - 12698-11Requires 1 Base Walls FSL - 12698-12Requires 1 Base Walls 2 FSL - 12698-13Requires 1 Base Floor FSA - 12698-14

Supplies• OESD AquaMesh stabilizer• OESD StabilStick Tear Away (for appliqué sections)• Isacord threads (use the same embroidery thread in the bobbin as the needle)• Appliqué fabrics (for appliqué sections)• Tea lights or pixie lights• Optional: alligator clamps, tweezer, hemostats, stiletto or crochet hook

Follow the General Freestanding Lace Guidelines and the General Freestanding Appliqué Guidelines to stitch the required pieces as listed in the summary above for the Vintage Sewing Machine.NOTE: The base of the machine has two holes meant to contain a battery operated tea light candles.

Embroidery:• Stitch one of each of all 14 designs on two layers of

AquaMesh. Follow appliqué instructions for design 12698-14.

Assembly Instructions

Assemble Hand Wheel• Using alligator clamps, pull buttonettes on Hand

Wheel Connector (12698-08) through eyelets on Hand Wheel (12698-09). PHOTO 1

• Next, complete Hand Wheel Connector by attaching end buttonette through end eyelet. PHOTO 2

• Then, attach the Hand Wheel Connector (12698-08) buttonettes through End Piece eyelets (12698-03), positioning the ends of Hand Wheel Connector towards bottom. PHOTO 3

Assemble Body• Attach End Piece (12698-03) to Side 1 (12698-01).

PHOTO 4• Repeat attaching Side 2 (12698-02) to End Piece

(12698-03). PHOTO 5• Connect two buttonettes and four eyelets from Top & Inner Piece (12698-04) to Side 1 (12698-01). PHOTO 6

Photo 6

Photo 3

Photo 5

Photo 2

Photo 4

Photo 1



• Attach Top & Inner Piece eyelets (12698-04) to End Piece buttonettes (12698-03). PHOTO 7

• Connect two buttonettes and four eyelets from Top & Inner Piece (12698-04) to Side 2 (12698-02). PHOTO 8

• Attach Bottom Neck Piece (12698-07) to Side Panels (12698-01) & (12698-02), positioning half circle on Bottom Neck Piece towards Hand Wheel. PHOTO 9

• Connect Top Neck Piece (12698-06) to Side Panels (12698-01) & (12698-02) positioning half circle on Top Neck Piece towards Hand Wheel.. PHOTO 10

• Attach Foot (12698-10) to Head Piece (12698-05). PHOTO 11

• Now attach Head Piece (12698-05) to Side Panels (12698-01) & (12698-02). PHOTO 12

Assemble Base• Assemble Base Walls (12698-12) to Base Top (12698-11). PHOTO 13• Now attach buttonettes and eyelets from Base Walls 2 (12698-13) to Base

Top (12698-11) and Base Walls (12698-12). PHOTO 14• Attach Body Assembly to Base Assembly. PHOTOS 15

& 16• Attach Base Floor (12698-14) to Base Assembly.

PHOTO 17NOTE: Sewing Machine is constructed so that Top Neck Piece can be removed to insert pixie lights into machine.

Your Vintage Sewing Machine is complete!

Photo 10

Photo 9Photo 8Photo 7

Photo 11 Photo 12

Photo 13 Photo 14

Photo 16

Photo 17

Photo 15

Documents

Freestanding Vintage Sewing Machine - Embroidery Online · 2017-06-28 · Freestanding Vintage Sewing Machine Handy Hints Drying: • Freestanding pieces look best when left to dry