311
Products and news for the dental professionAll too often, modalities of therapy are perceived as antiquated and overlooked because quicker, easier solutions may be avail-able. This overview of time-tested telescopic restorative options may prove to be viable for many dental restorations. A telescopic retainer is a coping that fits under, in a concen-tric manner, or telescopes within, to support and retain an over-crown. The coping may be an abutment for a fixed dental pros-thesis (FDP), removable periodontal prosthesis, crown-sleeve-coping partial denture, or overdenture (Fig 1).The Glossary Screen-reader users, click here to turn off Google Instant. +sadish ` A n n a l s o f D e n t a l S p e c i a l t y 2 0 1 3 ; V o l u m e 0 1 , I s s u e 01 4 Esthetics considerations in the selection of teeth for complete denture patients: A Review Nafis Ahmad, 1

Fred

Embed Size (px)

DESCRIPTION

xc vcxv xcb vc cggb vhg

Citation preview

Products and news for the dental professionAll too often, modalities of therapy are perceived as antiquatedand overlooked because quicker, easier solutions may be avail-able. This overview of time-tested telescopic restorative optionsmay prove to be viable for many dental restorations.A telescopic retainer is a coping that fits under, in a concen-tric manner, or telescopes within, to support and retain an over-crown. The coping may be an abutment for a fixed dental pros-thesis (FDP), removable periodontal prosthesis, crown-sleeve-coping partial denture, or overdenture (Fig 1).The Glossary Screen-reader users, click here to turn off Google Instant.+sadishTop of Form`A n n a l s o f D e n t a l S p e c i a l t y 2 0 1 3 ; V o l u m e 0 1 , I s s u e 014Esthetics considerations in the selection of teeth for complete denture patients: A ReviewNafis Ahmad,1Musharib Ahmed2, Zeba Jafri3IntroductionTeeth selection is not simply a mechanical procedure, but requires dexterity and knowledge of biology. Selection of teeth forms an important step before teeth arrangement.1Objective of teeth selection-It is to create a dentofacial harmony. An acceptable cosmetic effect in any dental restoration has always been regarded as important to good dentistry. A well-made prosthesis will fail if it is deficient in this respect. Esthetics includes the appreciation and response to the beautiful in art and nature. Esthetics has been given many definitions in dentistry but according to Young. It is apparent that beauty, harmony, naturalness and individuality are major qualities of esthetics.2The dentist must visualize esthetics in relation to the patient and then translate that visualization into an acceptable esthetic result. The success of Dentist efforts depends upon his artistic ability, his powers of observation and his experience.METHODOLOGYI] Pre extraction recordsDiagnostic casts: of patients natural teeth or restored teeth prior to extraction of remaining teeth. Recent photographs: They will often provide general information about the width of the teeth and possibly their outline form that is more accurate than information from any other source. Radiograph of teeth: Radiographs made before the natural teeth were lost can supply information about the size and form of the teeth to be replaced.1Radiographic images are however always enlarged and may be distorted because of divergence of the x-ray.II] Post-extraction examination Size and form of edentulous foundation, matching teeth to face forms and arch forms. If patient is already a denture wearer, mouth should be examined with the dentures in the mouth giving importance to physiological and aesthetic aspects.Factors influencing size and form of anterior teethSize of face, Amount of available inter-arch space, measured distance between distal of right and left maxillary cuspids, Length of lips, Size and relation of arches and Sex of the patient are the main factors which influenced the size and form of anterior teeth.3Size of anterior teeth LengthNormally necks of anterior teeth overlap the anterior ridge by 2-3mm cervically and incisal edges will show below the relaxed lip.WidthMeasuring width of anterior teethMark corners of the mouth on the occlusal rim in the mouth and the distal surface of the upper canines can be indicated by marks made on the upper rim at the corners of the mouth. Then the distance between the marks is measured around the labial surface of the occlusal rim and anterior teeth of this width are arranged as indicated by the occlusal rim. A variation depends upon: Length of upper lip, Mobility of upper lip, Vertical height of occlusion and Vertical overlap.4,5AbstractThe selection of artificial teeth for an edentulous patient is a most important and often difficult problem for the dentist. He should select teeth which not only embody the proper form and size, but the most ideal shade as well. The art of selection of teeth for edentulous patients has been lost in the maze of tooth guides, folders and pamphlets and the numerous methods of selection advocated by researchers. An attempt has been made in this paper to briefly describe the various methods advocated in the literature and to reach a practical method. For the sake of clarity and simplicity, the matter has been dealt with deferent aspects of geometrical analysis of face form, arch form, facial profile and other parameters like age, sex and personality of the patients.Key Words: - Artificial Teeth, Edentulous Patients, Dento-facial Harmony, Pre-Extraction Records, Dentogenics.REVIEW ARTICLE ISSN (ONLINE): 2321 - 8436 `A n n a l s o f D e n t a l S p e c i a l t y 2 0 1 3 ; V o l u m e 0 1 , I s s u e 015Ahmad N et alForm of anterior teethBased on face form:Classification of face form by Leon Williams:It consists of two imaginary lines passing about 2.5cm in front of the tragus of the ear and through the angle of the jaw.Based on arch form:Based on profile of the faceThe labial surface of the tooth viewed from the mesialaspects should show a contour similar to that when viewed in profile.The labial surface of the tooth viewed from the incisal aspect should show a convexity or flatness similar to that seen when the face is viewed from under the chin or from the top of the head.6Relationship of upper arch and upper incisorsV shaped arch teeth narrower at the neck than the incisal edge.Rounded arch ovoid teeth.Squarish arch parallel sided incisors.Colour of teethKnowledge of physics, physiology, and psychology of Colour is valuable in the selection of teeth Colour. Hue, Saturation, Colour of Teeth, Brilliance, and Translucency are the parameters to select colour of the tooth.7,8Hue: It is the specific Colour produced by a specific wavelength of light acting on the retina. The hue of teeth must be in harmony with the Colour of patients face. Saturation: It is the amount of Colour per unit area of an object. Brilliance: It is the lightness or darkness of an object. People with fair complexion generally have teeth with less Colour and the Colours are less saturated. Thus, the teeth are lighter and in harmony with the Colours of the face. People with dark complexions generally have darker teeth that are in harmony with the colour of the face.9,1Characteristics of natural teeth Neck of tooth has more pronounced Colour than incisal edge. The incisal edge, if unworn is more translucent than the body of the tooth. Maxillary central incisors are lightest teeth in the mouth, maxillary laterals and mandibular incisors are slightly darker. Canines are still darker. Posterior teeth are usually uniform in colour and slightly lighter than canines. Teeth darken with age.10Translucency: It is the property of an object that permits the passage of light through it but does not give any distinguishable image.Suggestions for selecting the teeth: Always moisten the shade guide because when in mouth, the teeth are always moist and this has an effect on the reflection and refraction of light and hence the Colour. Always place the teeth in the shade of the upper lip in position they are to occupy. They will appear darker in this position than in hand. Select teeth under natural light. Attempts to look at the face as a whole rather than focus on teeth.Selection of posterior teethThe cuspal inclines for posterior teeth depend on the plan / scheme of occlusion selected by the dentist. Commonly used posterior cuspal inclinations are 33, 20 and 0. The inclination is measured as the angle formed by the mesio -buccal cusp of lower molar with the horizontal.10,11Selection includesShade, Size, Buccolingual width, Mesiodistal length, Vertical length, Number and Form Shade:It should harmonize with the shade of the anterior teeth. Bulk influences the shade of the teeth and for this reason it is advisable to select a slightly lighter shade for the bicuspids if they are to be arranged for aesthetics. They may be slightly lighter than the other posterior teeth but not lighter than anterior teeth.12`A n n a l s o f D e n t a l S p e c i a l t y 2 0 1 3 ; V o l u m e 0 1 , I s s u e 016Ahmad N et alSize and member of posterior teeth:The size and number of posterior teeth are closely related to usage. These characteristics are dictated by the anatomy of the surrounding oral environment and physiologic acceptance of supporting tissues. The posterior teeth must support the cheeks and tongue and function in harmony with the musculature in swallowing and speaking as well as in mastication.Buccolingual width of posterior teeth:The buccolingual width of artificial teeth should be greatly reduced from the width of natural teeth they replace. Artificial teeth that are narrow in buccolingual direction enhance the development of the correct form of the polished surfaces of the denture by allowing the buccal and lingual denture flanges to slope away from the occlusal surfaces. This occlusal form permits forces from the cheeks and tongue to maintain the dentures in position on the residual ridges. Narrow occlusal surfaces with proper escape ways for food also reduce the amount of stress applied on food during mastication to the supporting tissues of the basal seat on the other hand the posterior teeth should have sufficient width to act as table upon which to hold food during trituration.Mesiodistal width of posterior teeth:The mesiodistal width of posterior teeth is determined by the edentulous area between the distal of the mandibular cuspids and the ascending area of the mandible. After the six mandibular anterior teeth have been placed in their final position a point is marked on the crest of the mandibular ridge at the anterior border of the retro molar pad. This is the maximum extent posteriorly of any artificial teeth on the mandibular ridge. In well-formed ridge the apex of the retro molar pad is taken as posterior level and is resorbed ridges the point where retro molar pad turns upward.12Vertical length of buccal surface of posterior teethIt is best to select posterior teeth corresponding to the inter -arch space and to the length of the anterior teeth. The length of the maxillary first premolars should be comparable to that of the maxillary canines to have the proper aestheticeffect.Less wear resistance: Tendency to dull in appearance during use as a result of loss of surface luster. Care should be taken when polishing the denture to prevent undesirable modifications in tooth contour.Teeth ArrangementIn prosthodontics the term arrangement would refer to a procedure of locating, tilting, rotating and spacing artificial tooth/teeth in relation to the plane of reference and to each other with the object of creating a natural appeal and based on biomechanical requirements of complete denture treatment. General position of each of the tooth is such that the imaginary root passes through restored ridge contour of maxillary foundation.13Table 1: - Relation of tooth to the frontal plane:Arrangement of mandibular anterior teethLower central and lower anterior teeth are placed upright. Lower canines are mesially tilted sleeping canines. The lower anterior teeth are placed in a mesial relation to the upper anterior teeth. There is horizontal overlap of about 2-3mm. There is a vertical overlap of about 1-2mm.Arrangement of Posterior TeethRelationship of teeth to cast:In mandible bone loss occurs from both buccal and lingual sides in downward direction, since natural posterior teeth are lingually inclined, the artificial teeth can be set right over the lower ridge without encroaching on the space occupied by the cheek / tongue. In maxillae, the loss is entirely from buccal and labial surfaces and hence the residual ridge lays slightly more palatally all round. The maxillary posteriors are placed slightly lateral to the crest. In order to reduce the tipping forces on the lower denture, a compromise is done by not placing the upper teeth on the crest of the ridge which would otherwise result in discrepancy in occlusion.13,14DENTOGENICS Sex FactorExpression of feminine characteristicsFrom her finger tips to her smile ----- A woman is feminine.An excellent beginning is to select initially a mold which express soften anatomic characteristics or one which is highly adaptable to being shaped and formed into a dictate type of tooth by certain grinding procedures. The interpretation of feminity will keep to the spherical form instead of circular so as to identify the third dimension. The basic feminine form should however be harmonized with the individual patient. The individual is accomplished by AngulationsMaxillary Central incisorMaxillary Lateral incisorMaxillary CanineLabial inclinationSlight inclinationRelatively more labial inclination and cervical depression than C.I.Located in upright manner cervical portion of the tooth should be more prominentRelation of tooth to clinical midlineReveals very slight mesial inclinationShows relatively more mesial inclination than central incisorIs placed in a upright mannerRelation of incisal edge to midsagittal plane (rotation).Reveals an angle a little less than 90 to the sagittal planeReveals anangle of 30 to sagittal planeReveals anangle of 45 to sagittal planeRelation of incisal edge to occlusal planeIs in contact with occlusal planeRemains -1mm away from the occlusal planeCanine tip remains in contact with the occlusal plane `A n n a l s o f D e n t a l S p e c i a l t y 2 0 1 3 ; V o l u m e 0 1 , I s s u e 017Ahmad N et aldefinite grinding procedures where the incisal edges must follow a curve rather than a straight line.15,16,17Expression of masculine characteristics:From his fists to his mouth. A man is masculine. A basic tooth form which expresses masculine characteristics shows vigor, boldness and hardness.Personality FactorsHe should be concerned with the personality of a patient when constructing a denture because this is our best measure of his priceless individuality and the most reliable source of knowledge by which we may express his dignity through prosthodontic methods. The comprehensive use o f personality depends upon our manipulation of tooth shapes (molds), tooth Colours, tooth posterior and the matrix (visible denture base) of these teeth.16,17Age factorsThere is beauty in age as well as in youth, but in fact age has the edge. It is routine first to consider light shades for young people and darker shades for older ones. Age in the artificial tooth must also be accompanied by mold refinement. In the artificial tooth, we may reflect the appropriate age effects by such means as grinding the incisal edges and removing the incisal enamel at such an inclination and to such depth as to convey reality to the composition. The sharp tip of cuspid suggests youth and as age increases it should be judiciously shaped, not abruptly ground so as it imply abrasion against opposing teeth. The erosion imparted to artificial teeth by careful grinding and polishing very efficiently conveys the illusion of vigour and advanced age.17,18,19ConclusionThere are no definite guidelines for selection of posterior teeth. But it mainly depends on the type of patient and the condition of the supporting tissues. And hence, the selection of teeth is the responsibility of the dentist whic h he acquires through knowledge and experience.References1. Hayward DE. Use of natural upper teeth in complete dentures. J. Prosthet. Dent. 1968;19(4): 359 363.2. Young HA. Selecting the anterior tooth mold. J. Prosthet. Dent. 1954; 4: 748 760.3. Kern BE. Anthropometric parameters of tooth selection. J. Prosthet. Dent. 1967;17(5): 431 437.4. Mavroskoufis F, Ritchie GM. The face-form as a guide for the selection of maxillary central incisors. J. Prosthet. Dent 1980;43: 501 505.5. Mavroskoufis F, Ritchie GM. Nasal width and incisive papilla as guides for the selection and arrangement of maxillary anterior teeth. J. Prosthet. Dent. 1981;45(6): 592 597.6. Clapp GW. How the science of esthetic tooth form selection was made easy. J. Prosthet. Dent. 1955;5: 596 608.7. Dorlands Illustrated Medical Dictionary. W.B. Saunders, 28thEd. Pg 1666.8. Levin EI. Dental esthetics and the Golden proportions. J. Prosthet. Dent 1978;40(3): 244 252.9. Krajicek DD. Personalized acrylic resin anterior teeth. J. Prosthet. Dent. 1956;6: 29.10. Hickey JC, Zarb GA, Bolender CL, (1985): Bouchers prosthodontic treatment for edentulous patients, 9thEd., Mosby, S. Louis.11. Heartwell CM and Rahn AO (1986): Syllabus of complete dentures, 4thEd., Lea and Febiger, Philadelphia.12. Fenn, Lidelow, Gimson (1989): Clinical Dental Prosthetics, 3rdEd., Wright.13. Picard CF. Complete denture esthetics. J. Prosthet. Dent. 1958;8: 252.14. Kafandaris NM and Theodorou TP. Complete denture technique using natural teeth. J. Prosthet. Dent. 1974;33: 571.15. Frush JP and Fisher RD. Introduction to dentogenic restorations. J. Prosthet. Dent. 1955;5: 586 595.16. Frush JP and Fisher RD. How dentogenic restorations interpret the sex factor. J. Prosthet. Dent. 1956;6:160 172.17. Frush JP and Fisher RD. How dentogenics interpret the personality factor. J. Prosthet. Dent.1956;6:441 449.18. Frush JP and Fisher RD. The age factor in dentogenics. J. Prosthet. Dent 1957;7: 5 13.19. Frush JP and Fisher RD. The dynesthetic interpretation of the dentogenic concept. J. Prosthet. Dent. 1958;8: 558 581.Corresponding AuthorDr. Nafis AhmadAssistant Professor,Department of Prosthodontics,Jamia Millia IslamiaNew Delhi, INDIAE-mail: - [email protected]

Bottom of FormWebImagesNewsVideosMoreSearch tools1. 2.

About 16,40,00,000 results(0.24 seconds)Top of FormBottom of FormSearch Results1. Medical diagnosis - Wikipedia, the free encyclopediaen.wikipedia.org/wiki/Medical_diagnosis Jump toAdditionaltypes of diagnosis-[edit]. Sub-typesof diagnoses include: Clinicaldiagnosis: Adiagnosismade on the basis of medical signs and...History and etymology-Indication for diagnostic ...-General components2. Anxiety Disorders: Types, Causes, Symptoms, Diagnosis ...www.webmd.com/anxiety-panic/guide/mental-health-anxiety-disorders Learn more about anxiety disorders, includingtypes, causes, symptoms,diagnosis, treatment, and prevention.3. Dementia Types | Signs, Symptoms, & Diagnosiswww.alz.org Home Alzheimer's & Dementia Dementiatypes, symptoms and brain changes associated with each - learn the difference between Alzheimer's and dementias including vascular and Lewy...4. Type 1 diabetes - Diagnosis - NHS Choiceswww.nhs.uk/Conditions/Diabetes-type1/Pages/Diagnosis.aspx It's important todiagnosediabetes as early as possible, so that treatment can be started. Visit your GP as soon as possible if you have the symptoms of diabetes.5. Diagnostic Tests: MedlinePluswww.nlm.nih.gov Home Health Topics Apr 28, 2015 -DiagnosticTests. Email this page to a friend Facebook Twitter Bookmark & Share. To use the sharing features on this page, please enable...6. Tests for Type 2 Diabetes Diagnosis | Everyday Healthwww.everydayhealth.com Conditions Type 2 Diabetes Oct 13, 2014 -Type2 diabetes isdiagnosedby blood tests to measure the level of glucose, or sugar, in your blood.7. Diagnosis Type - Value Set Detailshttps://phinvads.cdc.gov/vads/ViewValueSet.action?oid=2.16.840.1... Concept Code, Concept Name, Preferred Concept Name, Code System, Value Set. A, Admitting, Admitting,Diagnosis type(HL7),Diagnosis Type(HL7), Details.8. Common Types of Diagnostic Medical Equipmentmedicalsupplies.about.com ... Medical Specialty Equipment Dec 4, 2014 -Diagnosticmedical equipment and supplies help clinicians to measure and observe various aspects of a patient's health so that they can form a...9. Breast Cancer Tests: Screening, Diagnosis, and Monitoringwww.breastcancer.org Symptoms & Diagnosis Screening and Testing Dec 8, 2014 -Whether you've never had breast cancer and want to increase your odds of early detection, you've recently beendiagnosed, or you are in the...10. Lung Cancer: Diagnosis | Cancer.Netwww.cancer.net Types of Cancer Lung Cancer This list describes options fordiagnosingthistypeof cancer, and not all tests listed will be used for every person. Your doctor may consider these factors when...

1. Types Of DiagnosisAdwww.webcrawler.com/Search multiple engines fortypes of diagnosis2. Fibromyalgia? Weak muscleAdwww.lgmd-diagnosis.org/It might be muscular dystrophy not fibromyalgia at all! FIND OUTSearches related to types of diagnosisdiseasediagnosisprovisionaldiagnosisdiagnosisand treatmenttypes of diagnosiscodesclinicaldiagnosismedicaldiagnosisonline freefreediagnosistypes ofnursingdiagnosis

12345678910Next

Thavalakuppam, Puducherry-From your Internet address-Use precise location-Learn moreHelpSend feedbackPrivacyTermsofProsthodontic Termsdefines a telescopic crown as an artifi-cial crown constructed to fit over a coping (framework). Thee fit of complete dentures.13-15 Researchers have found that these same rhythmic changes also affect centric relation records made for dentulous patients.16, l7 Inasmuch as the centric relation position has been advo- cated for complete dentures, l8 this study was undertaken to evaluate the effect of circadian periodicity on the repro- ducibility of centric relation records for edentulous pa- tients. METHODS Thirty edentulous patients who exhibited good health, average muscular coordination, and relatively unresorbed ridges were selected for this study. Impressions were made, interocclusal records were obtained, and maxillary and mandibular complete dentures were made according to ac- cepted techniques.lg Patients for whom retrusion into the centric relation position was difficult and those who exhib- ited undue denture instability resulting from redundant mucosal tissues were excluded. After delivery of the dentures, the patients were divided Supported by a grant from the University of Tennessee Dental Alumni Endowment Fund. aProfessor, Department of Prosthodontics. 10/l/39550 into three groups and the dentures remounted twice on the same day. The dentures for 10 patients were remounted twice in the morning (AM group), for 10 patients twice in the afternoon (PM group), and for 10 patients once in the Table I. Means and range of measurements (in millimeters) Time group Products and news for the dental professionAll too often, modalities of therapy are perceived as antiquatedand overlooked because quicker, easier solutions may be avail-able. This overview of time-tested telescopic restorative optionsmay prove to be viable for many dental restorations.A telescopic retainer is a coping that fits under, in a concen-tric manner, or telescopes within, to support and retain an over-crown. The coping may be an abutment for a fixed dental pros-thesis (FDP), removable periodontal prosthesis, crown-sleeve-coping partial denture, or overdenture (Fig 1).The Glossary ofProsthodontic Termsdefines a telescopic crown as an artifi-cial crown constructed to fit over a coping (framework). Thee fit of complete dentures.13-15 Researchers have found that these same rhythmic changes also affect centric relation records made for dentulous patients.16, l7 Inasmuch as the centric relation position has been advo- cated for complete dentures, l8 this study was undertaken to evaluate the effect of circadian periodicity on the repro- ducibility of centric relation records for edentulous pa- tients. METHODS Thirty edentulous patients who exhibited good health, average muscular coordination, and relatively unresorbed ridges were selected for this study. Impressions were made, interocclusal records were obtained, and maxillary and mandibular complete dentures were made according to ac- cepted techniques.lg Patients for whom retrusion into the centric relation position was difficult and those who exhib- ited undue denture instability resulting from redundant mucosal tissues were excluded. After delivery of the dentures, the patients were divided Supported by a grant from the University of Tennessee Dental Alumni Endowment Fund. aProfessor, Department of Prosthodontics. 10/l/39550 into three groups and the dentures remounted twice on the same day. The dentures for 10 patients were remounted twice in the morning (AM group), for 10 patients twice in the afternoon (PM group), and for 10 patients once in the Table I. Means and range of measurements (in millimeters) Time group All data Horizontal Sagittal Right Left AM-PM AM PM Mean 0.728 0.718 0.729 0.712 0.744 0.932 0.577 0.675 Standard deviation 0.537 0.506 0.566 0.539 0.537 0.635 0.432 0.465 Standard error 0.035 0.046 0.052 0.049 0.049 0.071 0.048 0.052 Variance 0.289 0.256 0.321 0.291 0.288 0.403 0.187 0.216 Coefficient of variation 73.824 70.502 77.669 75.74 72.156 68.094 74.838 68.948 Count 240 120 120 120 120 80 80 80 Minimum 0 0 0 0 0 0 0 0 Maximum 2.63 2.19 2.63 2.19 2.63 2.63 1.63 1.98 Range 2.63 2.19 2.63 2.19 2.63 2.63 coping can be another crown, a bar, or any other suitable rigidsupport for the dental prosthesis. Products and news for the dental professionAll too often, modalities of therapy are perceived as antiquatedand overlooked because quicker, easier solutions may be avail-able. This overview of time-tested telescopic restorative optionsmay prove to be viable for many dental restorations.A telescopic retainer is a coping that fits under, in a concen-tric manner, or telescopes within, to support and retain an over-crown. The coping may be an abutment for a fixed dental pros-thesis (FDP), removable periodontal prosthesis, crown-sleeve-coping partial denture, or overdenture (Fig 1).The Glossary ofProsthodontic Termsdefines a telescopic crown as an artifi-cial crown constructed to fit over a coping (framework). Thecoping can be another crown, a bar, or any other suitable rigidsupport for the dental prosthesis.1The use of telescopic retain-ers for FDPs or removable prostheses, tooth- or implant-borne,continues to serve as a valuable therapeutic restorative optiontoday. Implants and other current innovations do not make tele-scopes obsolete as retainers; on the contrary, they can enhanceeach other and expand the range of viable treatment alterna-tives. Before the advent of implants, the location and/or num-ber of remaining natural abutments often presented problems inachieving stable, functional, and esthetic restorations. Becauseof the myriad of options they provide, telescopic retainers afforda modality of treatment that can enhance the maintenance andsurvival of natural abutments and provide additional optionsfor the restoration of a partially edentulous mouth.Yalisove and Dietz2described the versatility of telescopicretainers in restorative dentistry. They identified the scientificrationale and promoted the use of this modality of treatment.Telescopic retainers provide the following advantages:1. Efficient home care by removing the overprosthesis(Figs 25).2. Reduction of lateral stress on abutment teeth by allowingfor self-releasing or stress conversion (Figs 68).Journal of Prosthodontics21(2012) 7983 c 2011 by the American College of Prosthodontists 79All too often, modalities of therapy are perceived as antiquatedand overlooked because quicker, easier solutions may be avail-able. This overview of time-tested telescopic restorative optionsmay prove to be viable for many dental restorations.A telescopic retainer is a coping that fits under, in a concen-tric manner, or telescopes within, to support and retain an over-crown. The coping may be an abutment for a fixed dental pros-thesis (FDP), removable periodontal prosthesis, crown-sleeve-coping partial denture, or overdenture (Fig 1).The Glossary ofProsthodontic Termsdefines a telescopic crown as an artifi-cial crown constructed to fit over a coping (framework). Thecoping can be another crown, a bar, or any other suitable rigidsupport for the dental prosthesis.1The use of telescopic retain-ers for FDPs or removable prostheses, tooth- or implant-borne,continues to serve as a valuable therapeutic restorative optiontoday. Implants and other current innovations do not make tele-scopes obsolete as retainers; on the contrary, they can enhanceeach other and expand the range of viable treatment alterna-tives. Before the advent of implants, the location and/or num-ber of remaining natural abutments often presented problems inachieving stable, functional, and esthetic restorations. Becauseof the myriad of options they provide, telescopic retainers afforda modality of treatment that can enhance the maintenance andsurvival of natural abutments and provide additional optionsfor the restoration of a partially edentulous mouth.Yalisove and Dietz2described the versatility of telescopicretainers in restorative dentistry. They identified the scientificrationale and promoted the use of this modality of treatment.Telescopic retainers provide the following advantages:1. Efficient home care by removing the overprosthesis(Figs 25).2. Reduction of lateral stress on abutment teeth by allowingfor self-releasing or stress conversion (Figs 68).Journal of Prosthodontics21(2012) 7983 c 2011 by the American College of Prosthodontists 79All too often, modalities of therapy are perceived as antiquatedand overlooked because quicker, easier solutions may be avail-able. This overview of time-tested telescopic restorative optionsmay prove to be viable for many dental restorations.A telescopic retainer is a coping that fits under, in a concen-tric manner, or telescopes within, to support and retain an over-crown. The coping may be an abutment for a fixed dental pros-thesis (FDP), removable periodontal prosthesis, crown-sleeve-coping partial denture, or overdenture (Fig 1).The Glossary ofProsthodontic Termsdefines a telescopic crown as an artifi-cial crown constructed to fit over a coping (framework). Thecoping can be another crown, a bar, or any other suitable rigidsupport for the dental prosthesis.1The use of telescopic retain-ers for FDPs or removable prostheses, tooth- or implant-borne,continues to serve as a valuable therapeutic restorative optiontoday. Implants and other current innovations do not make tele-scopes obsolete as retainers; on the contrary, they can enhanceeach other and expand the range of viable treatment alterna-tives. Before the advent of implants, the location and/or num-ber of remaining natural abutments often presented problems inachieving stable, functional, and esthetic restorations. Becauseof the myriad of options they provide, telescopic retainers afforda modality of treatment that can enhance the maintenance andsurvival of natural abutments and provide additional optionsfor the restoration of a partially edentulous mouth.Yalisove and Dietz2described the versatility of telescopicretainers in restorative dentistry. They identified the scientificrationale and promoted the use of this modality of treatment.Telescopic retainers provide the following advantages:1. Efficient home care by removing the overprosthesis(Figs 25).2. Reduction of lateral stress on abutment teeth by allowingfor self-releasing or stress conversion (Figs 68).Journal of Prosthodontics21(2012) 7983 c 2011 by the American College of Prosthodontists 79 June 2005 dentalproducts.net visit us online atC&B impressionsThe H&H cordless impressionRECRUITMENT OF PROBA TIONARY OFFICERS IN ST A TE BANK OF INDIAADVERTISEMENT NO. CRPD/PO/2015-16/02CENTRALRECRUITMENT & PROMOTION DEP ARTMENT , CORPORA TE CENTRE, MUMBAI(Phone : 022-2282 0427; Fax : 022-2282 041 1; E-mail : [email protected])ONLINE REGISTRA TION OF APPLICA TION: 13.04.2015 TO 02.05.2015P A YMENT OF FEES - ONLINE: 13.04.2015 TO 02.05.2015Preliminary Examination will be conducted tentatively in June 2015. Candidates are advised to regularly check Bank's website www.statebankofindia.com or www.sbi.co.in for details and updates. The examination will be as detailed under point No. 4 - Selection procedure.Applications are invited from eligible Indian Citizens for appointment as Probationary Officers (POs) in State Bank of India. Candidates selected are liable to be posted anywhere in India.SC ST OBC GEN Total OH VH Total308 339 541 812 2000 38 24 62Vacancies Vacancies (PWD)SC ST OBC Total OH VH67 219 107 393 14 Vacancies :Backlog vacancies detailed as under have been included in the above mentioned total vacancies.*V acancies reserved for OBC category are available to OBC Candidates belonging to 'Non-creamy layer'. 'Creamy layer' OBC candidates should indicate their category as 'General'.Vacancies for OH & VH category candidates are reserved horizontally . Vacancies including reserved vacancies are provisional and may vary according to the requirements of Bank.1. ELIGIBLITY CRITERIA :(A) Essential Academic Qualifications: (AS ON 01.09.2015)Graduation in any discipline from a recognised University or any equivalent qualification recognised as such by the Central Government. Those who are in the Final year/Semester of their Graduation may also apply provisionally subject to the condition that, if called for interview , they will have to produce proof of having passed the graduation examination on or before 01.09.2015. Candidates having integrated dual degree (IDD) certificate should ensure that the date of passing the IDD is on or before 01.09.2015.Note : The date of passing eligibility examination will be the date appearing on the marksheet or provisional certificate issued by the University / Institute. In case the result of a particular examination is posted on the website of the University / Institute, a certificate issued by the appropriate authority of the University / Institute indicating the date on which the result was posted on the website will be taken as the date of passing. Irrespective of the date of examination, in case the proof of having passed the examination as on 01.09.2015 is not produced as detailed above the candidate will not be eligible.(B) Age Limit : (As on 01.04.2015)Not below 21 years and not above 30 years as on 01.04.2015 i.e candidates must have been born not earlier than 02.04.1985 and not later than 01.04.1994 (both days inclusive)Relaxation of Upper age limit :Sr. No. Category Age Relaxation1. Scheduled Caste/ Scheduled Tribe 5 years2. Other Backward Classes (Non-Creamy Layer) 3 years3. Persons With Disabilities (PWD PWD (SC/ST)-15 Y ears PWD (OBC)- 13 Y ears PWD (Gen)- 10 Y ears4. Ex Servicemen, Commissioned officers including Emergency 5 yearsCommissioned Officers (ECOs)/Short Service Commissioned Officers (SSCOs) who have rendered 5 years military service and have been released on completion of assignment (including those whose assignment is due to be completed within one year from the last date of receipt of application) otherwise than by way of dismissal or discharge on account of misconduct or inefficiency or physical disability attributable to military service or invalidment.5. Persons Ordinarily domiciled of the state of Jammu & Kashmir 5 yearsduring the period 01.01.1980 to 31.12.1989NOTE : CUMULATIVE AGE RELAXATION WILL NOT BE AVAILABLE EITHER UNDER THE ABOVE ITEMS OR IN COMBINATION WITH ANY OTHER ITEMS.2. RESERVATION FOR PERSONS WITH DISABILITY (PWD) :Vacancies are reserved for Orthopaedically Handicapped (OH) and Visually Handicapped (VH) as per Persons with Disabilities (Equal Opportunities, Protection of Rights & Full Participation) Act, 1995. Following categories of Persons with Disabilities are eligible to get the benefit of reservation- Categories of Persons with DisabilitiesOA OL OAL BL B L VOA -One Arm, OL-One Leg, OAL-One Arm and One Leg, BL-Both Leg, B- Blind, L V-Low Vision(a) Persons with OA and OAL category should have normal bilateral hand functions.(b) Blindness refers to a condition where a person suffers from any of the following Conditions, namely:-(i) T otal absence of sight; or(ii) Visual acuity not exceeding 6/60 or 20/200 (snellen) in the better eye with Correcting lenses; or(iii) Limitation of the field of vision subtending an angle of 20 degree or worse;(c) Person with Low Vision means a person with impairment of visual functioning even after treatment or standard refractive correction but who uses or is potentially capable of using vision for the planning or execution of a task with appropriate assistive device.(d) Only such persons would be eligible for reservations who suffer from not less than 40 per cent of relevant disabilities. A person who wants to avail of benefit of reservation would have to submit a Disability Certificate as per format prescribed by Ministry of Social Justice and Empowerment' Notification No. G.S.R. 2 (E) dated 30.12.2009.Use of Scribe & Compensatory Time: (i) The facility of Scribe / Reader would be allowed to any person who has disability of 40 % or more (only those candidates with disabilities who have physical limitation to write including that of speed) if so desired by the person. The compensatory time (20 minutes for every hour) would be applicable to such candidates.(ii) Candidates with low vision will be allowed compensatory time while writing the examination regardlessof whether they opt for amanuenses/scribe or self writing or with the help of assistive devices like magnifier.(iii) The scribe will be allowed to be used as per the guidelines issued vide Office Memorandum F . No. 16-1 10/ 2003-DD.III dated February 26, 2013 of Government of India, Ministry of Social Justice and Empowerment, Department of Disability Affairs, New Delhi and clarification issued by Government of India, Ministry of Finance, Deptt. Of Financial Services vide letter F . No.3/2/2013 - Welfare dated 26.04.2013.(iv) Any candidate who is not eligible to use scribe as per the guidelines referred to above and uses scribe in the written examination shall be disqualified to participate further in the recruitment process. Any candidate who is using scribe should ensure that he is eligible to use scribe in the examination as per the above guidelines. Any candidate using scribe in violation of the above guidelines shall stand disqualified and can be removed from service without notice, if has already joined the Bank.3. CATEGORYInstructions for writing Category Name and Category Code no. while applying online.Candidates belonging to OBC category but coming in the 'CREAMY LA YER', are not entitled to OBC reservation and age relaxation. They should indicate their category as 'GEN' or 'GEN (OH)' or 'GEN (VH)' (as applicable).Various category names and their code numbers are given below.PLEASE NOTE THAT CHANGE OF CATEGORY WILL NOT BE PERMITTED AT ANY STAGE AFTER REGISTRATION OF ONLINE APPLICATION.4. SELECTION PROCEDURE :Phase-I : Preliminary Examination: Preliminary Examination consisting of Objective T ests for 100 marks will be conducted online. This test would be of 1 hour duration consisting of 3 Sections as follows:Candidates have to qualify in each of the three tests by securing passing marks to be decided by the Bank. Adequate number of candidates in each category as decided by the Bank (approximately 20 times the numbers of vacancies subject to availability) will be short listed for the Main Examination. Phase II:Main Examination: Main Examination will consist of Objective T ests for 200 marks and Descriptive T est for 50 marks. Both the Objective and Descriptive T ests will be online. Candidates will have to answer Descriptive test by typing on the computer. Immediately after completion of Objective T est, Descriptive T est will be administered. (i) Objective Test: The Objective T est of 2 hour duration consists of 4 Sections with 50 marks each (T otal 200 marks) as follows:a) T est of English Language (Grammar , Vocabulary , Comprehension etc.)b) T est of General Awareness, Marketing &Computersc) T est of Data Analysis & Interpretationd) T est of Reasoning (High Level)The candidates are required to qualify in each of the T ests by securing passing marks, to be decided by the Bank.(ii) Descriptive Test: The Descriptive T est of 1 hour duration with 50 marks will be a T est of English Language (Letter Writing & Essay). Category Code Category Code Category Code Category CodeSC 01 ST 04 OBC 07 GEN 10SC(OH) 02 ST(OH) 05 OBC(OH) 08 GEN(OH) 1 1SC(VH) 03 ST(VH) 06 OBC(VH) 09 GEN(VH) 12SL. Name of test No. of Questions Marks Duration1. English Language 30 30 Composite Time of 2. Quantitative Aptitude 35 35 1 hour3. Reasoning Ability 35 35T otal 100 100(Contd. on next page...)(...contd. from previous page)The candidates are required to qualify in the Descriptive T est by securing passing marks, to be decided by the Bank.Descriptive Test paper of only those candidates will be evaluated who have scored qualifying marks in the Objective Tests and are placed adequately high as per total marks in objective test.Phase III: Group Discussion (20 marks) & Interview (30 marks)The aggregate marks of candidates qualifying in both the Objective T ests and Descriptive T est will be arranged in descending order in each category . Adequate number of candidates in each category , as decided by the Bank will be called for Group Discussion and Interview . The qualifying marks in Group Discussion &Interview will be as decided by the Bank.Candidates qualifying for GD & Interview under 'OBC' category would be required to submit OBC certificate containing the 'Non Creamy layer' clause. Candidates not submitting the OBC certificate containing the 'Non Creamy layer' clause and requesting to be interviewed under General category will not be entertained.Final SelectionThe marks obtained in the Preliminary Examination (Phase-I) will not be added for the selection and only the marks obtained in Main Examination (Phase-II) will be added to the marks obtained in GD & Interview (Phase-III) for preparation of the final merit list.The candidates will have to qualify both in Phase-II and Phase-III separately . Marks secured by the candidates in the Written T est (out of 250 marks) are converted to out of 75 and marks secured in Group Discussion & Interview (out of 50 marks) are converted to out of 25. The final merit list is arrived at after aggregating converted marks of Written T est and Group Discussion &Interview out of 100 for each category . The selection will be made from the top merit ranked candidates in each category . Results of the candidates who have qualified for GD & Interview and the list of candidates finally selected will be made available on the Bank's website. Final select list will be published in Employment News/ Rozgar Samachar.5. The examination will be held in the month of June 2015 (T entatively). The Tentative List of examination centres is provided under Point No. : 16.Candidate should choose the name of the Centre where he/she desires to take the examination. NO CHANGE IN THE CHOICE OF EXAMINATION CENTRE WILL BE ENTERTAINED UNDER ANY CIRCUMSTANCES. BANK RESERVES THE RIGHT TO ADD OR DELETE ANY CENTRE OR ALTER EXAMINATION DATE AT ITS DISCRETION.6. EMOLUMENTS :PAY: The starting basic pay is Rs.16,900/-(with 4 increments) in the scale of Rs. 14500-600/7-18700-700/2-20100-800/7-25700 applicable to Junior Management Grade Scale I. The official will also be eligible for D.A, H.R.A & C.C.A as per rules in force from time to time. The compensation per annum at Mumbai is around Rs. 8,55,000/-. The break up of monthly compensation is as under:Cash Component : 36,046/-Bank's contribution to PF : 1,690/-Housing (Lease Rental) : 29,500/-Perquisites (Conveyance, Newspapers, Entertainmentallowance, House & Furniture Maintenance etc. 4,130/-In addition, the officers are also entitled to other benefits like (i) Medical Aid for self (100%) and for family (75%)(ii) Home Travel Concession/Leave Fare Concession(iii) Concessional Interest Rates for Housing/Car/Personal LoansThe salary scales are under revision with effect from November 2012.CAREER PATHThe Probationary Officers will be on probation of two years during which they will be given intensive training. T owards the end of their probation / training period, they will be subjected to a screening process. While those Officers who achieve the predetermined standards may be confirmed and given placement in the next higher grade i.e., Officer Middle Management Grade Scale-II, others who qualify in the test but fail to achieve the standards set for placement in Middle Management Grade Scale-II, will be confirmed as Officer Junior Management Grade Scale-I. The services of those Officers who fail to qualify in this process will be terminated. Bank provides immense opportunities for growth in the Bank including opportunities for postings abroad. The attractive promotion policy of the Bank provides an opportunity to the meritorious and exceptionally brilliant officers to reach the T op Management Grade in a reasonably quick time.7. APPLICATION FEE AND INTIMA TION CHARGE: (Non Refundable)The Bank may add additional centres or may delete some of the centres indicated for training. Candidates opting for pre-examination training should download their call letter for training by entering their registration number and password/ date of birth from 26.05.2015 onwards from Bank's website. No hard copy of the call letter will be sent by post.9. Number of chances:Sr. No. Category Total1. SC/ST/PWD Rs.100/- (Intimation Charges only)2. General and Others Rs. 600/- (App. Fee including intimation charges)Fee/Intimation charges once paid will NOT be refunded on any account nor can it be held in reserve for any other examination or selection.8. PRE-EXAMINATION TRAINING : SBI may arrange pre-examination training at certain centres for SC/ST/Religious Minority Community candidates in consonance with the guidelines issued by Government of India. Candidates belonging to the above categories who desire to avail themselves of such training at their own cost may indicate to that effect against relevant column while applying on-line. An indicative list of training centres is given below :Category Number of ChancesGeneral 4General (PWD) 7OBC 7OBC(PWD) 7SC/SC(PWD)/ ST/ ST(PWD) No RestrictionCandidates who have already appeared for the maximum number of chances permissible are not eligible to to apply . The number of chances will be counted from the examination held on 18.04.2010.10 .HOW TO APPL YGUIDELINES FOR FILLING ONLINE APPLICATION:Candidates will be required to register themselves online through Bank's website www.statebankofindia.comor www.sbi.co.in. After registration candidates are required to pay the requisite application fee through online mode by using debit card/ credit card/Internet Banking.Pre-requisites for Applying OnlineCandidates should have valid email ID which should be kept active till the declaration of results. It will help him/her in getting call letter/interview advices etc. by email.PA YMENT OF FEES : [ONLINE MODE ONLY] :i. Candidates should first scan their photograph and signature as detailed under guidelines for scanning the photograph and signature.ii. Candidates to visit Bank's website www.statebankofindia.com or www.sbi.co.in and open the appropriate Online Application Format, available in the 'careers with us' link.iii. Fill the application carefully . Once the application is filled in completely , candidates should submit the data. In the event of candidates not being able to fill the data in one go, they can save the data already entered. When the data is saved, a provisional registration number and password will be generated by the system and displayed on the screen. Candidates should note down the registration number and password. They can re-open the saved data using registration number and password and edit the particulars, if needed. This facility will be available three times only . Once the application is filled in completely , candidates should submit the data. No change /edit will be allowed thereafter . The registration at this stage is provisional.iv . After ensuring the correctness of the particulars of the application form, candidates are required to pay fees through the payment gateway integrated with the application, following the instructions available on the screen.v . The payment can be made by using Debit Cards (RuPay/Visa/MasterCard/Maestro), Credit Cards, Internet Banking, IMPS, Cash Cards/ Mobile Wallets by providing information as asked on the screen. Transaction charges for online payment, if any , will be borne by the candidates.vi. On successful completion of the transaction, e-receipt and application form will be generated; which may be printed for record. The printout of the application form is not to be sent to the Bank.vii. If the online transaction is not successfully completed, please register again and make payment online.viii. There is also a provision to reprint the e-Receipt and Application form containing fee details, at later stage.11. GUIDELINES FOR SCANNING THE PHOTOGRAPH & SIGNATUREBefore applying online a candidate will be required to have a scanned (digital) image of his/her photograph and signature as per the specifications given in Annexure-I. Online application will not be registered unless candidates upload photo and signature as specified.Note:a. In case the face in the photograph or signature is unclear, the candidate's application may be rejected.b. In case the photograph or signature is unclear, the candidate may edit his application and re-upload his photograph or signature.12. CALL LETTERS FOR EXAMINATION:The candidates should download their call letter and an acquaint yourself booklet by entering their registration number and password / date of birth, from 09.06.2015 from the Bank's website. NO HARD COPY OF THE CALLLETTER / ACQUAINT YOURSELF BOOKLET WILL BE SENTBY POST .13. PROOF OF IDENTITY TO BE SUBMITTED AT THE TIME OF EXAMINTION:The candidates must bring one photo identity proof such as passport/Adhar/P AN Card/Driving Licence/Voter's Card/Bank Passbook with duly attested Photograph/Identity Card issued by college or university/Employee ID/Gazetted Officer in the official letterhead in original as well as a self-attested Photocopy thereof. The photocopy of Identity proof should be submitted along with call letter to the invigilators in the examination hall, failing which or if identity of candidates is in doubt the candidate will not be permitted to appear for the test.14. ACTION AGAINST CANDIDATES FOUND GUILTY OF MISCONDUCT :(a) Candidates are cautioned that they should not furnish any particulars that are false, tampered/ fabricated and they should not suppress any material information while filling up the application form. (b) At the time of examination/interview, if a candidate is (or has been) found guilty of:(i) using unfair means during the examination or (ii) impersonating or procuring impersonation by any person or (iii) misbehaving in the examination hall or (iv) resorting to any irregular or improper means in connection with his/her candidature for selection or (v) obtaining support for his/her candidature by any unfair means, such a candidate may, in addition to rendering himself/herself liable to criminal prosecution, will also be liable:a) to be disqualified from the examination for which he/she is a candidateb) to be debarred, either permanently or for a specified period, from any examination or recruitment conducted by Bank.(c) The Bank would be analyzing the responses of a candidate with other appeared candidates to detect patterns of similarity . On the basis of such an analysis, if it is found that the responses have been shared and scores obtained are not genuine / valid, the Bank reserves the right to cancel his/her candidature.(d) USE OF MOBILE PHONES, PAGERS, CALCULATOR OR ANY SUCH DEVICES:(i) Mobile phones, pagers or any other communication devices are not allowed inside the premises where the examination/interview is being conducted. Any infringement of these instructions shall entail cancellation of candidature and disciplinary action including ban from future examinations.(ii) Candidates are advised in their own interest not to bring any of the banned item including mobile phones/ pagers to the venue of the examination/interview, as arrangement for safekeeping cannot be assured. (iii) Candidates are not permitted to use or have in possession of calculators in examination premises.15. GENERAL INFORMA TION:i) Candidates are advised to take a printout of their system generated online application form after submitting the application.ii) On-line registration of application & fee payment will be available from 13.04.2015 to 02.05.2015iii) Candidates should satisfy themselves about their eligibility for the post applied for . The Bank would admit to the test all the candidates applying for the posts with the requisite fee on the basis of the information furnished in the online application and shall determine their eligibility only at the time of interview .iv) Candidates are advised in their own interest to apply online much before the closing date and not to wait till the last date to avoid the possibility of disconnection / inability / failure to log on to the website on account of heavy load on internet or website jam.v) SBI does not assume any responsibility for the candidates not being able to submit their applications within the last date on account of aforesaid reasons or for any other reason beyond the control of SBI.(Contd. on next page...)Agartala Agra Ahmedabad Aizwal Akola AllahabadAsansol Aurangabad Bareilly Bhubaneshwar Berhampur (Ganjam) Bhopal Bangalore Chandigarh Chennai Coimbatore Dehradun Dibrugarh Ernakulam Gangtok Gorakhpur Gulbarga Guwahati Hubli Hyderabad Imphal Indore Itanagar Jabalpur Jaipur Kanpur Kohima Kolkata Lucknow Madurai Meerut Mumbai Mysore Nagpur NewDelhi Panaji (Goa) Patna Port Blair Purnea Pune Raipur Ranchi SambalpurSilchar Siliguri Shillong Srinagar Tirupati Vadodara Varanasi Vishakhapatnam Vijaywadavi) Not more than one application should be submitted by a candidate. In case of multiple applications, only the last valid (completed) application will be retained and the application fee / intimation charges paid for the other registrations will stand forfeited. Multiple attendance/ appearance by a candidate in examination and / or GD and/ or interview will be summarily rejected/ candidature cancelled.vii) The possibility for occurrence of some problems in the administration of the examination cannot be ruled out completely , which may impact test delivery and/ or result from being generated. In that event, every effort will be made to rectify such problem, which may include the conduct of another examination if considered necessary.viii) Candidates serving in Govt./Quasi Govt. offices, Public Sector undertakings including Nationalised Banks and Financial Institutions are advised to submit 'No Objection Certificate' from their employer at the time of interview , failing which their candidature may not be considered and travelling expenses, if any , otherwise admissible, will not be paid.ix) In case of selection, candidates will be required to produce proper discharge certificate from the employer at the time of taking up the appointment.x) Caste certificate issued by Competent Authority on format prescribed by the Government of India will have to be submitted by the SC/ST candidates, if called for interview .xi) A declaration will have to be submitted in the prescribed format by candidates seeking reservation under OBC category stating that he/she does not belong to the creamy layer as on 02.05.2015. OBC certificate containing the 'Non-creamy layer' clause, issued during the period 01.04.2015 to the date of interview , should be submitted by such candidates, if called for interview .xii) Candidates are advised to keep their e-mail ID alive for receiving advices, viz. call letters/ Interview advices etc.xiii) Appointment of selected candidates is subject to his /her being declared medically fit as per the requirement of the Bank concerned.xiv) IN CASE IT IS DETECTED AT ANY STAGE OF RECRUITMENT THAT A CANDIDATE DOES NOT FULFILTHE ELIGIBILITY NORMS AND / OR THAT HE / SHE HAS FURNISHED ANY INCORRECT / FALSE INFORMA TION OR HAS SUPPRESSED ANYMATERIAL FACT(S), HIS /HERCANDIDA TURE WILLSTAND CANCELLED. IF ANY OF THESE SHORTCOMINGS IS / ARE DETECTED EVEN AFTER APPOINTMENT , HIS /HER SERVICES ARE LIABLETOBE TERMINATED.xv) Any legal proceedings in respect of any matter of claim or dispute arising out of this advertisement and/or an application in response thereto can be instituted only in Mumbai and courts/tribunals/ forums at Mumbai only shall have sole and exclusive jurisdiction to try any cause/dispute.16. EXAMINATION CENTERS (T entative List)The preliminary examination may be held at the following centres and the address of the venue will be advised in the call letters. Bank reserves the right to cancel any of the Examination Centres and/ or add some other Centre, at its discretion, depending upon the reponse, administrative feasibility , etc. Bank also reserves the right to allot the candidate to any centre other than the one he/she has opted for . The centres for Main Examination may be limited.(...contd. from previous page)CANVASSING IN ANYFORM WILLBE ADISQUALIFICATIONMumbai, GENERALMANAGERDate: 13.04.2015This advertisement is also available on Bank's Website : http://www.statebankofindia.com or http://www .sbi.co.in.The Bank is not responsible for printing errors, if any PHOTOGRAPH IMAGE:? Photograph must be a recent passport size colour picture.? The picture should be in colour, against a light-coloured, preferably white, background.? Look straight at the camera with a relaxed face.? If the picture is taken on a sunny day , have the sun behind you, or place yourself in the shade, so that you are not squinting and there are no harsh shadows.? If you have to use flash, ensure there's no red-eye.? If you wear glasses make sure that there are no reflections and your eyes can be clearly seen.? Caps, hats and dark glasses are not acceptable. Religious headwear is allowed but it must not cover your face.? Dimensions 200 x 230 pixels (preferred).? Size of file should be between 20kb50kb.? Ensure that the size of the scanned image is not more than 50KB. If the size of the file is more than 50KB, then adjust the settings of the scanner such as the DPI resolution, no. of colours etc., during the process of scanning.(ii) SIGNATURE IMAGE:? The applicant has to sign on white paper with Black Ink pen.? The signature must be signed only by the applicant and not by any other person.? If the Applicant's signature on the answer script, at the time of the examination, does not match the signature on the Attendance Sheet, the applicant will be disqualified. ? Dimensions 140 x 60 pixels (preferred).? Size of file should be between 10kb 20kb.? Ensure that the size of the scanned image is not more than 20KB.SCANNING THE PHOTOGRAPH & SIGNATURE:? Set the scanner resolution to a minimum of 200 dpi (dots per inch).? Set Color to True Color.? File Size as specified above.? Crop the image in the scanner to the edge of the photograph/signature, then use the upload editor to crop the image to the final size (as specified above).? The image file should be JPG or JPEG format. An example file name is: image01.jpg or image01.jpeg Image dimensions can be checked by listing the folder files or moving the mouse over the file image icon.Candidates using MS Windows/MS Office can easily obtain photo and signature in .jpeg format not exceeding 50KB & 20KB respectively by using MS Paint or MS Office Picture Manager . Scanned photograph and signature in any format can be saved in .jpg format by using 'Save As' option in the File menu and size can be reduced below 50KB (photograph) & 20KB (signature) by using crop and then resize option [Please see point (i) & (ii) above for the pixel size] in the 'Image' menu. Similar options are available in other photo editor also.If the file size and format are not as prescribed, an error message will be displayed.While filling in the Online Application Form the candidate will be provided with a link to upload his photograph and signature.Procedure for Uploading the Photograph and Signature(i) There will be two separate links for uploading Photograph and Signature.(ii) Click on the respective link Upload Photograph / Signature.(iii) Browse & Select the location where the Scanned Photo / Signature file has been saved.(iv) Select the file by clicking on it.(v) Click the 'Upload' button.Annexure - I1 1 Andaman & Nicobar Port Blair12 Andhra Pradesh Chirala, Chittoor, Guntur , Kakinada, Kurnool, Nellore, Ongole, Puttur, Rajahmundhry , Srikakulam, Tirupati, Vijaywada, Vishakhapatnam, Vizianagaram13 Arunachal Pradesh Itanagar Naharlagun14 Assam Dibrugarh, Guwahati, Jorhat, Kokrajhar, Silchar T ezpur15 Bihar Arrah, Aurangabad, Bihar Sharif, Bhagalpur, Darbhanga, Gaya, Hajipur, Muzaffarpur , Patna, Purnea, Samastipur , Siwan16 Chandigarh Chandigarh17 Chhattisgarh Bhilai, Bilaspur, Raipur18 Goa Panaji, Verna19 Gujarat Ahmedabad, Anand, Gandhinagar, Himmatnagar , Jamnagar , Mehsana, Rajkot, Surat, Vadodara20 Haryana Ambala, Bahadurgarh, Hissar, Karnal, Kurukshetra, Panipat, Palwal, Rohtak, Sonipat, Yamunanagar21 Himachal Pradesh Baddi, Bilaspur, Dharamshala, Hamirpur , Kangra, Kullu, Mandi, Shimla, Sirmaur, Solan, Una22 Jammu & Kashmir Jammu, Kathua, Samba, Srinagar23 Jharkhand Bokaro, Dhanbad, Hazaribag, Jamshedpur, Ranchi24 Karnataka Belgaum, Bengaluru, Bidar, Gulbarga, Hubli, Mangalore, Mysore, Shimoga, Udipi25 Kerala Alappuzha, Kannur, Kochi, Kollam, Kottayam, Kozhikode, Malappuram, Palakkad, Thrichur, Thiruvananthapuram26 Lakshwadeep Kavarrati27 Madhya Pradesh Bhopal, Gwalior, Indore, Jabalpur , Satna, Sagar , Ujjain28 Maharashtra Amaravati, Aurangabad, Chandrapur, Dhule Jalgaon, Kolhapur , Latur, Mumbai/ Thane/Navi Mumbai, Nagpur, Nanded, Nasik,Pune, Ratnagiri, Sangli, Satara29 Manipur Imphal30 Meghalaya Ri-Bhoi, Shillong31 Mizoram Aizawal32 Nagaland Kohima33 Delhi -NCR Delhi, Faridabad, Ghaziabad, Greater Noida, Gurgaon34 Odisha Angul, Balasore, Bargarh, Baripada, Berhampur (Ganjam), Bhubaneshwar, Cuttack, Dhenkanal, Jharsuguda, Rourkela, Sambalpur35 Puducherry Puducherry36 Punjab Amritsar, Bhatinda, Fatehgarh Sahib, Jalandhar , Ludhiana, Mohali, Pathankot, Patiala, Phagwara, Sangrur37 Rajasthan Ajmer, Alwar, Bhilwara, Bikaner , Jaipur , Jodhpur , Kota, Sikar, Udaipur38 Sikkim Gangtok39 T amilnadu Chennai, Coimbatore, Dindigul, Krishnagiri, Madurai, Nagercoil, Namakkal, Perambalur, Salem, Thanjavur, Thiruchirapalli, Tirunelvelli, Thoothukodi, Vellore40 T elangana Hyderabad, Karimnagar, Khammam, W arangal41 Tripura Agartala42 Uttar Pradesh Agra, Aligarh, Allahabad, Bareilly, Bulandshaher , Gorakhpur , Jhansi, Kanpur, Lucknow , Mathura, Meerut, Moradabad, Muzaffarnagar , Unnao, V aranasi43 Uttarakhand Dehradun, Haldwani, Haridwar, Roorkee44 West Bengal Asansol, Berhampur (West Bengal), Bardhaman, Dumkal, Durgapur, Hooghly , Howrah, Kalyani, Kolkata, SiliguriState CodeState/UT Centre State CodeState/UT CentreEXAMINATION CENTERS (Tentative List) technique using PerfectIM Systems impression materialBy Dr. Joe Steven, Jr., Wichita, Kan. Information provided by J. Morita USA Inc.Following are step-by-step procedures for the H&Hcordless impression technique using PerfectIMSystems vinyl polysiloxane impression material. 1. Immediately following the crown preparation (Fig.1), the assistant hands the clinician a triple tray loadedwith the 30-second Blue Velvet bite registration ma-terial (J. Morita) (Fig. 2).2. Place the tray into the patients mouth and have the pa-tient close properly and tightly. Have the assistant holdthe patients chin, while the patient bites down for oneminute. Note:During this initial impression, there isno hydraulic compression at the margins (Fig. 3). 3. After the material sets, ask the patient to open, keep-ing the impression firmly seated onto the opposingarch.4. Rinse any blood or saliva from the impression in themouth and dry it (Fig. 4). 5. The assistant hands the clinician a cartridge gun thatcontains SnoWhite wash material (J. Morita).Note:Avoid injecting too much wash material into the im-pression of the prepped tooth. This doesnt have to beexact, but try to fill it about halfway full of the mate-rial. It is better to use less wash material than to over-fill it and have it flow onto the adjacent teeth. 6. Inject the material only into the area of the preppedtooth within the impression (Figs. 5 and 6) andhave the patient bite together tightly again for 1minute (Fig. 7). During this dual impression stage, Products and news for the dental profession June 2005 dentalproducts.net visit us online atC&B impressionsThe H&H cordless impression technique using PerfectIM Systems impression materialBy Dr. Joe Steven, Jr., Wichita, Kan. Information provided by J. Morita USA Inc.Following are step-by-step procedures for the H&Hcordless impression technique using PerfectIMSystems vinyl polysiloxane impression material. 1. Immediately following the crown preparation (Fig.1), the assistant hands the clinician a triple tray loadedwith the 30-second Blue Velvet bite registration ma-terial (J. Morita) (Fig. 2).2. Place the tray into the patients mouth and have the pa-tient close properly and tightly. Have the assistant holdthe patients chin, while the patient bites down for oneminute. Note:During this initial impression, there isno hydraulic compression at the margins (Fig. 3). 3. After the material sets, ask the patient to open, keep-ing the impression firmly seated onto the opposingarch.4. Rinse any blood or saliva from the impression in themouth and dry it (Fig. 4). 5. The assistant hands the clinician a cartridge gun thatcontains SnoWhite wash material (J. Morita).Note:Avoid injecting too much wash material into the im-pression of the prepped tooth. This doesnt have to beexact, but try to fill it about halfway full of the mate-rial. It is better to use less wash material than to over-fill it and have it flow onto the adjacent teeth. 6. Inject the material only into the area of the preppedtooth within the impression (Figs. 5 and 6) andhave the patient bite together tightly again for 1minute (Fig. 7). During this dual impression stage,hydraulic pressure causes the impression to precise-ly record subgingival margins in the presence ofblood and saliva and eliminates the need for pack-ing cord (Fig. 8).7. The assistant removes the tray, and the clinician in-spects it for accuracy (Fig. 9). Vinyl polysiloxane impression material.FeaturesAccurate final impressions of subgingival marginsNo retraction cord, gingival excision, or application of hemostaticagents necessaryTwo-step system eliminates the time-consuming task of packing retraction cord and therefore anypossible subsequent discomfortMaterials are cartridge-dispensed, radiopaque,hydrophobic, andthixotropic (exceptSnoWhite and Final Wash)PerfectIM Systems TechniqueTasteless and odorlessExceptional dimensional stabilityImmersible in aqueous disinfectantsA range of working/setting timesand viscosities is available for anyimpression procedureJ. Morita USA Inc.www.jmoritausa.com9 MasonIrvine, CA 92618888-566-7482Fig. 4Rinse blood or saliva from theimpression and dry it.Fig. 5Inject the wash material only on the area of the prepped tooth withinthe impression. Fig. 6The appropriate area of the tooth to inject the wash material.Fig. 9The completed impression. Fig. 7Have the patient bitetogether for one minute.Fig. 8How the tissue and fluids displace in patients mouth.The H&H techniqueThe H&H cordless impression technique de-veloped by Dr. Jeffrey Hoos can save any-where from 10 to 20 minutes per procedureand much more time for multiple preps.There are several advantages to this techniquethat benefit the patient and the offices bot-tom line. There is no need to stop the bleeding be-cause of thehydrophobicnature of thisvinyl polysiloxane material. It is not necessary to pack retraction cordbecause of the hydraulic pressure createdduring the dual impression technique. There is no need to use any hemostatic so-lutions that patients detest. The procedure is efficient, simple, and in-creases patient comfort, saves treatment time,and gets great results.When first trying this technique, start off witha single-unit posterior crown and test yourtechnique along with your lab technician. This technique requires more die spacingthan conventional crown techniques espe-cially at the occlusal line angles. The labtechnician must apply more die spacer (ap-proximately 40 microns), especially at the oc-clusal and axial line angles. Every lab is dif-ferent, so simply explain that their die spac-ing technique may need to be modified forH&H cases.Wait until seating the first crown beforeattempting the procedure with other patients.DPRFig. 3There is no hydraulic compression at the critical margin zone.Fig. 2Triple tray filled with Blue Velvetbite registration material.Fig. 1The prepared crown.Copyright NoticeCopyright by Advanstar Communications Inc. Advanstar Communications Inc. retains all rights to this article. This article may only be viewed or printed (1) for personal use. User may notactively save any text or graphics/photos to local hard drives or duplicate this article in whole or in part, in any medium. Advanstar Communications Inc. home page is located at http://www.advanstar.com. Reprinted from DENTAL PRODUCTS REPORT, June 2005 Printed in U.S.A.hydraulic pressure causes the impression to precise-ly record subgingival margins in the presence ofblood and saliva and eliminates the need for pack-ing cord (Fig. 8).7. The assistant removes the tray, and the clinician in-spects it for accuracy (Fig. 9). Vinyl polysiloxane impression material.FeaturesAccurate final impressions of subgingival marginsNo retraction cord, gingival excision, or application of hemostaticagents necessaryTwo-step system eliminates the time-consuming task of packing retraction cord and therefore anypossible subsequent discomfortMaterials are cartridge-dispensed, radiopaque,hydrophobic, andthixotropic (exceptSnoWhite and Final Wash)PerfectIM Systems TechniqueTasteless and odorlessExceptional dimensional stabilityImmersible in aqueous disinfectantsA range of working/setting timesand viscosities is available for anyimpression procedureJ. Morita USA Inc.www.jmoritausa.com9 MasonIrvine, CA 92618888-566-7482Fig. 4Rinse blood or saliva from theimpression and dry it.Fig. 5Inject the wash material only on the area of the prepped tooth withinthe impression. Fig. 6The appropriate area of the tooth to inject the wash material.Fig. 9The completed impression. Fig. 7Have the patient bitetogether for one minute.Fig. 8How the tissue and fluids displace in patients mouth.The H&H techniqueThe H&H cordless impression technique de-veloped by Dr. Jeffrey Hoos can save any-where from 10 to 20 minutes per procedureand much more time for multiple preps.There are several advantages to this techniquethat benefit the patient and the offices bot-tom line. There is no need to stop the bleeding be-cause of thehydrophobicnature of thisvinyl polysiloxane material. It is not necessary to pack retraction cordbecause of the hydraulic pressure createdduring the dual impression technique. There is no need to use any hemostatic so-lutions that patients detest. The procedure is efficient, simple, and in-creases patient comfort, saves treatment time,and gets great results.When first trying this technique, start off witha single-unit posterior crown and test yourtechnique along with your lab technician. This technique requires more die spacingthan conventional crown techniques espe-cially at the occlusal line angles. The labtechnician must apply more die spacer (ap-proximately 40 microns), especially at the oc-clusal and axial line angles. Every lab is dif-ferent, so simply explain that their die spac-ing technique may need to be modified forH&H cases.Wait until seating the first crown beforeattempting the procedure with other patients.DPRFig. 3There is no hydraulic compression at the critical margin zone.Fig. 2Triple tray filled with Blue Velvetbite registration material.Fig. 1The prepared crown.Copyright NoticeCopyright by Advanstar Communications Inc. Advanstar Communications Inc. retains all rights to this article. This article may only be viewed or printed (1) for personal use. User may notactively save any text or graphics/photos to local hard drives or duplicate this article in whole or in part, in any medium. Advanstar Communications Inc. home page is located at http://www.advanstar.com. Reprinted from DENTAL PRODUCTS REPORT, June 2005 Printed in U.S.A.Products and news for the dental professionAll too often, modalities of therapy are perceived as antiquatedand overlooked because quicker, easier solutions may be avail-able. This overview of time-tested telescopic restorative optionsmay prove to be viable for many dental restorations.A telescopic retainer is a coping that fits under, in a concen-tric manner, or telescopes within, to support and retain an over-crown. The coping may be an abutment for a fixed dental pros-thesis (FDP), removable periodontal prosthesis, crown-sleeve-coping partial denture, or overdenture (Fig 1).The Glossary ofProsthodontic Termsdefines a telescopic crown as an artifi-cial crown constructed to fit over a coping (framework). Thecoping can be another crown, a bar, or any other suitable rigidsupport for the dental prosthesis.1The use of telescopic retain-ers for FDPs or removable prostheses, tooth- or implant-borne,continues to serve as a valuable therapeutic restorative optiontoday. Implants and other current innovations do not make tele-scopes obsolete as retainers; on the contrary, they can enhanceeach other and expand the range of viable treatment alterna-tives. Before the advent of implants, the location and/or num-ber of remaining natural abutments often presented problems inachieving stable, functional, and esthetic restorations. Becauseof the myriad of options they provide, telescopic retainers afforda modality of treatment that can enhance the maintenance andsurvival of natural abutments and provide additional optionsfor the restoration of a partially edentulous mouth.Yalisove and Dietz2described the versatility of telescopicretainers in restorative dentistry. They identified the scientificrationale and promoted the use of this modality of treatment.Telescopic retainers provide the following advantages:1. Efficient home care by removing the overprosthesis(Figs 25).2. Reduction of lateral stress on abutment teeth by allowingfor self-releasing or stress conversion (Figs 68).Journal of Prosthodontics21(2012) 7983 c 2011 by the American College of Prosthodontists 79All too often, modalities of therapy are perceived as antiquatedand overlooked because quicker, easier solutions may be avail-able. This overview of time-tested telescopic restorative optionsmay prove to be viable for many dental restorations.A telescopic retainer is a coping that fits under, in a concen-tric manner, or telescopes within, to support and retain an over-crown. The coping may be an abutment for a fixed dental pros-thesis (FDP), removable periodontal prosthesis, crown-sleeve-coping partial denture, or overdenture (Fig 1).The Glossary ofProsthodontic Termsdefines a telescopic crown as an artifi-cial crown constructed to fit over a coping (framework). Thecoping can be another crown, a bar, or any other suitable rigidsupport for the dental prosthesis.1The use of telescopic retain-ers for FDPs or removable prostheses, tooth- or implant-borne,continues to serve as a valuable therapeutic restorative optiontoday. Implants and other current innovations do not make tele-scopes obsolete as retainers; on the contrary, they can enhanceeach other and expand the range of viable treatment alterna-tives. Before the advent of implants, the location and/or num-ber of remaining natural abutments often presented problems inachieving stable, functional, and esthetic restorations. Becauseof the myriad of options they provide, telescopic retainers afforda modality of treatment that can enhance the maintenance andsurvival of natural abutments and provide additional optionsfor the restoration of a partially edentulous mouth.Yalisove and Dietz2described the versatility of telescopicretainers in restorative dentistry. They identified the scientificrationale and promoted the use of this modality of treatment.Telescopic retainers provide the following advantages:1. Efficient home care by removing the overprosthesis(Figs 25).2. Reduction of lateral stress on abutment teeth by allowingfor self-releasing or stress conversion (Figs 68).Journal of Prosthodontics21(2012) 7983 c 2011 by the American College of Prosthodontists 79All too often, modalities of therapy are perceived as antiquatedand overlooked because quicker, easier solutions may be avail-able. This overview of time-tested telescopic restorative optionsmay prove to be viable for many dental restorations.A telescopic retainer is a coping that fits under, in a concen-tric manner, or telescopes within, to support and retain an over-crown. The coping may be an abutment for a fixed dental pros-thesis (FDP), removable periodontal prosthesis, crown-sleeve-coping partial denture, or overdenture (Fig 1).The Glossary ofProsthodontic Termsdefines a telescopic crown as an artifi-cial crown constructed to fit over a coping (framework). Thecoping can be another crown, a bar, or any other suitable rigidsupport for the dental prosthesis.1The use of telescopic retain-ers for FDPs or removable prostheses, tooth- or implant-borne,continues to serve as a valuable therapeutic restorative optiontoday. Implants and other current innovations do not make tele-scopes obsolete as retainers; on the contrary, they can enhanceeach other and expand the range of viable treatment alterna-tives. Before the advent of implants, the location and/or num-ber of remaining natural abutments often presented problems inachieving stable, functional, and esthetic restorations. Becauseof the myriad of options they provide, telescopic retainers afforda modality of treatment that can enhance the maintenance andsurvival of natural abutments and provide additional optionsfor the restoration of a partially edentulous mouth.Yalisove and Dietz2described the versatility of telescopicretainers in restorative dentistry. They identified the scientificrationale and promoted the use of this modality of treatment.Telescopic retainers provide the following advantages:1. Efficient home care by removing the overprosthesis(Figs 25).2. Reduction of lateral stress on abutment teeth by allowingfor self-releasing or stress conversion (Figs 68).Journal of Prosthodontics21(2012) 7983 c 2011 by the American College of Prosthodontists 79 June 2005 dentalproducts.net visit us online atC&B impressionsThe H&H cordless impressionRECRUITMENT OF PROBA TIONARY OFFICERS IN ST A TE BANK OF INDIAADVERTISEMENT NO. CRPD/PO/2015-16/02CENTRALRECRUITMENT & PROMOTION DEP ARTMENT , CORPORA TE CENTRE, MUMBAI(Phone : 022-2282 0427; Fax : 022-2282 041 1; E-mail : [email protected])ONLINE REGISTRA TION OF APPLICA TION: 13.04.2015 TO 02.05.2015P A YMENT OF FEES - ONLINE: 13.04.2015 TO 02.05.2015Preliminary Examination will be conducted tentatively in June 2015. Candidates are advised to regularly check Bank's website www.statebankofindia.com or www.sbi.co.in for details and updates. The examination will be as detailed under point No. 4 - Selection procedure.Applications are invited from eligible Indian Citizens for appointment as Probationary Officers (POs) in State Bank of India. Candidates selected are liable to be posted anywhere in India.SC ST OBC GEN Total OH VH Total308 339 541 812 2000 38 24 62Vacancies Vacancies (PWD)SC ST OBC Total OH VH67 219 107 393 14 Vacancies :Backlog vacancies detailed as under have been included in the above mentioned total vacancies.*V acancies reserved for OBC category are available to OBC Candidates belonging to 'Non-creamy layer'. 'Creamy layer' OBC candidates should indicate their category as 'General'.Vacancies for OH & VH category candidates are reserved horizontally . Vacancies including reserved vacancies are provisional and may vary according to the requirements of Bank.1. ELIGIBLITY CRITERIA :(A) Essential Academic Qualifications: (AS ON 01.09.2015)Graduation in any discipline from a recognised University or any equivalent qualification recognised as such by the Central Government. Those who are in the Final year/Semester of their Graduation may also apply provisionally subject to the condition that, if called for interview , they will have to produce proof of having passed the graduation examination on or before 01.09.2015. Candidates having integrated dual degree (IDD) certificate should ensure that the date of passing the IDD is on or before 01.09.2015.Note : The date of passing eligibility examination will be the date appearing on the marksheet or provisional certificate issued by the University / Institute. In case the result of a particular examination is posted on the website of the University / Institute, a certificate issued by the appropriate authority of the University / Institute indicating the date on which the result was posted on the website will be taken as the date of passing. Irrespective of the date of examination, in case the proof of having passed the examination as on 01.09.2015 is not produced as detailed above the candidate will not be eligible.(B) Age Limit : (As on 01.04.2015)Not below 21 years and not above 30 years as on 01.04.2015 i.e candidates must have been born not earlier than 02.04.1985 and not later than 01.04.1994 (both days inclusive)Relaxation of Upper age limit :Sr. No. Category Age Relaxation1. Scheduled Caste/ Scheduled Tribe 5 years2. Other Backward Classes (Non-Creamy Layer) 3 years3. Persons With Disabilities (PWD PWD (SC/ST)-15 Y ears PWD (OBC)- 13 Y ears PWD (Gen)- 10 Y ears4. Ex Servicemen, Commissioned officers including Emergency 5 yearsCommissioned Officers (ECOs)/Short Service Commissioned Officers (SSCOs) who have rendered 5 years military service and have been released on completion of assignment (including those whose assignment is due to be completed within one year from the last date of receipt of application) otherwise than by way of dismissal or discharge on account of misconduct or inefficiency or physical disability attributable to military service or invalidment.5. Persons Ordinarily domiciled of the state of Jammu & Kashmir 5 yearsduring the period 01.01.1980 to 31.12.1989NOTE : CUMULATIVE AGE RELAXATION WILL NOT BE AVAILABLE EITHER UNDER THE ABOVE ITEMS OR IN COMBINATION WITH ANY OTHER ITEMS.2. RESERVATION FOR PERSONS WITH DISABILITY (PWD) :Vacancies are reserved for Orthopaedically Handicapped (OH) and Visually Handicapped (VH) as per Persons with Disabilities (Equal Opportunities, Protection of Rights & Full Participation) Act, 1995. Following categories of Persons with Disabilities are eligible to get the benefit of reservation- Categories of Persons with DisabilitiesOA OL OAL BL B L VOA -One Arm, OL-One Leg, OAL-One Arm and One Leg, BL-Both Leg, B- Blind, L V-Low Vision(a) Persons with OA and OAL category should have normal bilateral hand functions.(b) Blindness refers to a condition where a person suffers from any of the following Conditions, namely:-(i) T otal absence of sight; or(ii) Visual acuity not exceeding 6/60 or 20/200 (snellen) in the better eye with Correcting lenses; or(iii) Limitation of the field of vision subtending an angle of 20 degree or worse;(c) Person with Low Vision means a person with impairment of visual functioning even after treatment or standard refractive correction but who uses or is potentially capable of using vision for the planning or execution of a task with appropriate assistive device.(d) Only such persons would be eligible for reservations who suffer from not less than 40 per cent of relevant disabilities. A person who wants to avail of benefit of reservation would have to submit a Disability Certificate as per format prescribed by Ministry of Social Justice and Empowerment' Notification No. G.S.R. 2 (E) dated 30.12.2009.Use of Scribe & Compensatory Time: (i) The facility of Scribe / Reader would be allowed to any person who has disability of 40 % or more (only those candidates with disabilities who have physical limitation to write including that of speed) if so desired by the person. The compensatory time (20 minutes for every hour) would be applicable to such candidates.(ii) Candidates with low vision will be allowed compensatory time while writing the examination regardlessof whether they opt for amanuenses/scribe or self writing or with the help of assistive devices like magnifier.(iii) The scribe will be allowed to be used as per the guidelines issued vide Office Memorandum F . No. 16-1 10/ 2003-DD.III dated February 26, 2013 of Government of India, Ministry of Social Justice and Empowerment, Department of Disability Affairs, New Delhi and clarification issued by Government of India, Ministry of Finance, Deptt. Of Financial Services vide letter F . No.3/2/2013 - Welfare dated 26.04.2013.(iv) Any candidate who is not eligible to use scribe as per the guidelines referred to above and uses scribe in the written examination shall be disqualified to participate further in the recruitment process. Any candidate who is using scribe should ensure that he is eligible to use scribe in the examination as per the above guidelines. Any candidate using scribe in violation of the above guidelines shall stand disqualified and can be removed from service without notice, if has already joined the Bank.3. CATEGORYInstructions for writing Category Name and Category Code no. while applying online.Candidates belonging to OBC category but coming in the 'CREAMY LA YER', are not entitled to OBC reservation and age relaxation. They should indicate their category as 'GEN' or 'GEN (OH)' or 'GEN (VH)' (as applicable).Various c