Upload
others
View
4
Download
0
Embed Size (px)
Citation preview
ISO/TC130Graphictechnology
Framework for ISO/TC130standards
V1.0 2019
ISO/TC130
Framework for ISO/TC130 standards v1.0 2019 – page 2
Contents
1 Introduction......................................................................................................................................................3
2 Theprintworkflow.........................................................................................................................................4
3 CategorizationofISO/TC130standards..................................................................................................6
4 FrameworkforISO/TC130standards...................................................................................................16
5 WorkinggroupsforISO/TC130standardsdevelopment................................................................18
ISO/TC130
Framework for ISO/TC130 standards v1.0 2019 – page 3
1 Introduction
ISO/TC130developsandpublishesstandardsthatarewidelyusedthroughouttheworld.Asthebodyofpublished standards from ISO/TC 130 continues to grow, there is a need to have these standardssummarized, categorized and introduced as a whole. Based on analysis of current standards andanticipationoffuturestandards,aframeworkinvolvingthecategorizationofISO/TC130standardswithsupportive informationhasbeendevelopedandpublishedas thisdocument,whichmaybeusedasareferencefortheISO/TC130workprogramme,andfacilitatestandardsapplicationanddevelopment.
Forbetterunderstandingof ISO/TC130 standards and thedevelopmentmechanism, the frameworkgiveninthisdocumentisestablishedinconsiderationofthefollowingelements:
a) Functionalareasofspecificstandardsandstakeholders
Fromaprintworkflowviewpoint,manystakeholdersareinvolvedinvariousprocesses,whichfallintodifferentfunctionalareas.ISO/TC130standardsareapplicabletoindividualprocesseswithstakeholdersas intended users. The relevance of specific standards is closely connected to the stakeholders’responsibilitiesandneedsineachprocess.
b) CategorizationofISO/TC130standards
TheISO/TC130standardscanbeorganizedintotwomajorcategoriesaccordingtothetechnicalcontentsofeachstandard.Thesecategoriesare:
l Multiple-processrelatedstandards,includingsevensub-categories
l Single-processrelatedstandards,includingsixsub-categories
c) Workinggroups
Workinggroupsareestablishedforspecifictasksinstandardsdevelopment.ThisdocumentgivesalistofactiveworkinggroupswithinISO/TC130asadditionalinformationforeasyreference.
Tosummarize,thisdocumentnotonlygivesacategorizationframeworkforISO/TC130standards,butalsodefinesthepurposeorrationaleofstandardsdevelopmentineachcategory.
Thisdocumentisintendedtoaddressthefollowingquestionsinauser’sfriendlyway:
• WhattechnicalissuesdoISO/TC130standardsdealwith?• WhoaretargetusersofISO/TC130standards?• HowtofindinterrelationshipamongISO/TC130standards?• WhoareresponsibleforISO/TC130standardsdevelopment?
Sincenewstandardswillbedevelopedandexistingstandardsarerevisedregularly,thisdocumentwillbeupdatedaccordingly.
ISO/TC130
Framework for ISO/TC130 standards v1.0 2019 – page 4
2 Theprintworkflow
2.1 Processeswithinputsandoutputs
ISO/TC130standardsarerelatedtoprocessesintheprintworkflowasshowninFigure1.Uponprintbuyers’requests,printedproductscanbemanufacturedthrougheitheraconventionalprintingsystemoradigitalprintingsystem.Inaddition,ifdigitalproductsarerequired,electronicdeliveryisalsopossibleforcross-mediapublishing.Suppliersandprocesscontrolstakeholdersarelinkedtomultipleprocessesthroughouttheworkflow.
Rules,guidelinesorcharacteristicsforprintproductionactivitiesortheirresults,andrequirementsformaterials,equipmentandsystemsinvolvedinprocessesintheprintworkflowareprovidedbyISO/TC130standards.
NOTE1:Theellipsesrepresentprocesses.NOTE2:Therectanglesrepresentinputsandoutputs.NOTE3:Thesquaresrepresentstakeholders.
Figure1—Processeswithinputsandoutputsinatypicalprintworkflow
JobinitiationDatapreparationandexchange
Prepresstreatment
Printingformmaking
Printingoperation
Postpresshandling
Contractproof
Validationprint
Productrequest
Digitalfiles+specifications
Digitalfiles+specifications
Printingform
Printedsubstrate
Finishedproduct
Reporting/Supplier'sdeclarationofconformity
Finishedproduct/Certificationofproductconformity
Digitalfiles
Specifications
Contractproof/Digitalfiles+specifications
Logistics
Electronicdelivery
DigitalprintingConventionalprinting
Contractproof
Printbuyer
Multi-mediauser
Enduser
Supplier ProcessControl
ISO/TC130
Framework for ISO/TC130 standards v1.0 2019 – page 5
2.2 Stakeholdersandtheirareasofresponsibility
Stakeholdersintheworkflowplayvariousroles.ThecontentsofISO/TC130standardsaddressissuesintheirareasofresponsibilityasshowninFigure2.Consequently,analysisofstakeholdersandtheirareasofresponsibilitycanhelptodefinethepurposeandapplicabilityofrelevantstandards.
Stakeholdersidentifyrolesanditispossiblethatmorethanonepersonisrequiredforaroleandthatasinglepersonmaytakeonmultipleroles.ThetasksundertakenbythePrintBuyer,theDesignerandthePre-PressOperatormaybeinterchangeable.Themultimediauserandtheenduserareoftenthemostimportantstakeholders,buttheyarenotincludedhereastheyarepassiverecipients,i.e.userswithoutresponsibilities.Moreinformationontherolesofthedifferentstakeholderscanbefoundinthedocument“Guidelinesforusingprintproductionstandards”(seeinISO/TC130websitehttps://committee.iso.org/home/tc130)
Figure2—Stakeholdersandresponsibleareas
Printbuyer Designer Prepress
operatorPrintingform
operatorPress
operatorPostpressoperator
Distributionagency
Stakeholders
Responsibilities
• Productrequest • Composition• Colormanagement• Preflightchecking• Digitalfileconversion• Proofing• ……
• Printproduction • Productpacking• Goodsdelivery• ……
• Creativedesign—Artworkintherelevantfileformatincludingfonts,imagesandintendedoutputICC-profile
• Postproduction—Surfacefinishing—Binding—Converting—……
• Formmaking
• Equipment,substrateandconsumablemanufactureandsupply
• Qualityassurance• Environmentalcontrol• ……
Supplier
Processcontrol
ISO/TC130
Framework for ISO/TC130 standards v1.0 2019 – page 6
3 CategorizationofISO/TC130standards
In linewith the technical contents, the ISO/TC 130 standards can be organized into two categories:multiple-processrelated(seeTable1)andsingle-processrelated(seeTable2).Eachcategoryisdividedintoseveralsub-categories.Themultiple-processrelatedstandardsinTable1areapplicabletomorethanoneprocess.Thesingle-processrelatedstandardsinTable2areapplicabletospecificprocesses.Formoredetailsaboutthesestandards,seeTable3.
NOTE1 ISO/TC 130 has also published other deliverables, such as technical specifications, public availablespecificationsandtechnicalreports,eachofwhichfallswithinoneofthesecategories.NOTE2 “Guidelinesforusingprintproductionstandards”canbereferredtowhenusecasesofthesestandardsareneeded.
Table1—Standardsthatrelatetomorethanoneprocess
Terminology Media and materials
Measurement and testing
Process quality control
Conformity assessment
Ergonomics and safety
Environment and ecology
ISO5776ISO12637-1ISO12637-2ISO12637-3ISO12637-4
ISO2846-1ISO2846-2ISO11084-1ISO11084-2ISO12635ISO12636ISO15397
ISO2834-1ISO2834-2ISO2834-3ISO2836ISO12040ISO12632ISO12634ISO12644ISO12645ISO/TR12705ISO13655ISO15341ISO15790ISO/TS18621-11:2019ISO19594ISO20654
ISO12640-1ISO12640-1/Cor1:2004ISO12640-2ISO12640-2/Amd1:2007ISO12640-3ISO12640-4ISO12640-5ISO12641ISO12641-1ISO12642-1ISO12642-2ISO15076-1ISO/TR16066ISO18619ISO/TS21830
ISO15311-1ISO15311-2ISO19302
ISO/TR15847ISO12643-1ISO12643-2ISO12643-3ISO12643-4ISO12643-5
ISO16759ISO20294ISO20690ISO21632
NOTEISO14298“Graphictechnology—Managementofsecurityprintingprocesses”doesnotfallintoanyoftheabovecategories.
ISO/TC130
Framework for ISO/TC130 standards v1.0 2019 – page 7
Table2—Standardsthatrelateprimarilytoasingleprocess
Job initiation Data preparation and exchange
Prepress treatment
Printing operation
Postpress handling
Product packing and logistics
ISO16762ISO19593-1
ISO12639ISO/TR14672ISO15930-1ISO15930-3ISO15930-4ISO15930-6ISO15930-7ISO15930-8ISO16612-1ISO16612-2ISO16613-1ISO16684-1ISO16684-2ISO16760ISO17972-1ISO17972-2ISO17972-3ISO17972-4ISO19445ISO20677ISO21812-1ISO28178
ISO/TS10128ISO12218ISO12646ISO12647-7ISO12647-8ISO14861ISO18620
ISO12647-1ISO12647-2ISO12647-3ISO12647-4ISO12647-5ISO12647-6ISO12647-6/Amd1:2005ISO/PAS15339-1ISO/PAS15339-2
ISO16763
NOTETheemptyspaceincolumnsmeansthatthereisnostandardinthatarea.TC130shouldconsiderwhetherastandardisrequired.
Table3—OverviewofpublishedstandardsofISO/TC130
No. Standardno. Whodeveloped
it
Standardname Sub-category
1 ISO2834-1:2006 WG4 Graphictechnology—Laboratorypreparationoftestprints—Part1:Pasteinks
Measurementandtesting
2 ISO2834-2:2015 WG4 Graphictechnology—Laboratorypreparationoftestprints—Part2:Liquidprintinginks
Measurementandtesting
3 ISO2834-3:2008 WG4 Graphictechnology—Laboratorypreparationoftestprints—Part3:Screenprintinginks
Measurementandtesting
4 ISO2836:2004 WG4Graphictechnology—Printsandprintinginks—Assessmentofresistanceofprintstovariousagents
Measurementandtesting
5 ISO2846-1:2017 WG4
Graphictechnology—Colourandtransparencyofprintinginksetsforfour-colourprinting—Part1:Sheet-fedandheat-setweboffsetlithographicprinting
Mediaandmaterials
ISO/TC130
Framework for ISO/TC130 standards v1.0 2019 – page 8
Table3—OverviewofpublishedstandardsofISO/TC130(continued)
No. Standardno. Whodeveloped
it
Standardname Sub-category
6 ISO2846-2:2007 WG4Graphictechnology—Colourandtransparencyofprintinginksetsforfour-colourprinting—Part2:Coldsetoffsetlithographicprinting
Mediaandmaterials
7 ISO5776:2016 WG1 Graphictechnology—Symbolsfortextproofcorrection Terminology
8 ISO/TS10128:2009 WG3
Graphictechnology—Methodsofadjustmentofthecolourreproductionofaprintingsystemtomatchasetofcharacterizationdata
Prepresstreatment
9 ISO11084-1:1993 WG4
Graphictechnology—Registersystemsforphotographicmaterials,foilsandpaper-Part1:Three-pinsystems
Mediaandmaterials
10 ISO11084-2:2006 WG4
Graphictechnology—Registersystemsforphotographicmaterials,foilsandpaper—Part2:Registerpinsystemsforplatemaking
Mediaandmaterials
11 ISO12040:1997 WG4Graphictechnology--Printsandprintinginks--Assessmentoflightfastnessusingfilteredxenonarclight
Measurementandtesting
12 ISO12218:1997 WG3 Graphictechnology—Processcontrol—Offsetplatemaking
Prepresstreatment
13 ISO12632:2015 WG4Graphictechnology—Ink,paperandlabels—Requirementsonhotalkalipenetrationandresistance
Measurementandtesting
14 ISO12634:2017 WG4 Graphictechnology—Determinationoftackofpasteinksandvehiclesbyarotarytackmeter
Measurementandtesti5ng
15 ISO12635:2008 WG4 Graphictechnology—Platesforoffsetprinting—Dimensions
Mediaandmaterials
16 ISO12636:2018 WG4 Graphictechnology—Blanketsforoffsetprinting
Mediaandmaterials
17 ISO12637-1:2006 WG1 Graphictechnology—Vocabulary—Part1:
Fundamental Terminology
18 ISO12637-2:2008 WG1 Graphictechnology—Vocabulary—Part2:
Prepressterms Terminology
19 ISO12637-3:2009 WG1 Graphictechnology—Vocabulary—Part3:
Printingterms Terminology
ISO/TC130
Framework for ISO/TC130 standards v1.0 2019 – page 9
Table3—OverviewofpublishedstandardsofISO/TC130(continued)
No. Standardno. Whodeveloped
it
Standardname Sub-category
20 ISO12637-4:2008 WG1 Graphictechnology—Vocabulary—Part4:
Postpressterms Terminology
21 ISO12639:2004 WG2Graphictechnology—Prepressdigitaldataexchange—Tagimagefileformatforimagetechnology(TIFF/IT)
Datapreparationandexchange
22 ISO12639:2004/Amd1:2007 WG2
Graphictechnology—Prepressdigitaldataexchange—Tagimagefileformatforimagetechnology(TIFF/IT)—Amendment1:UseofJBIG2-Amd2compressioninTIFF/IT
Datapreparationandexchange
23 ISO12640-1:1997 WG2
Graphictechnology—Prepressdigitaldataexchange—Part1:CMYKstandardcolourimagedata(CMYK/SCID)
Processqualitycontrol
24 ISO12640-1:1997/Cor1:2004
WG2
Graphictechnology—Prepressdigitaldataexchange—Part1:CMYKstandardcolourimagedata(CMYK/SCID)—TechnicalCorrigendum1
Processqualitycontrol
25 ISO12640-2:2004 WG2
Graphictechnology—Prepressdigitaldataexchange—Part2:XYZ/sRGBencodedstandardcolourimagedata(XYZ/SCID)
Processqualitycontrol
26 ISO12640-2:2004/Cor1:2008
WG2
Graphictechnology—Prepressdigitaldataexchange—Part2:XYZ/sRGBencodedstandardcolourimagedata(XYZ/SCID)—TechnicalCorrigendum1
Processqualitycontrol
27 ISO12640-3:2007 WG2
Graphictechnology—Prepressdigitaldataexchange—Part3:CIELABstandardcolourimagedata(CIELAB/SCID)
Processqualitycontrol
28 ISO12640-4:2011 WG2
Graphictechnology—Prepressdigitaldataexchange—Part4:Widegamutdisplay-referredstandardcolourimagedata[AdobeRGB(1998)/SCID]
Processqualitycontrol
29 ISO12640-5:2013 JWG9
Graphictechnology—Prepressdigitaldataexchange—Part5:Scene-referredstandardcolourimagedata(RIMM/SCID)
Processqualitycontrol
30 ISO12641:1997 WG2Graphictechnology—Prepressdigitaldataexchange—Colourtargetsforinputscannercalibration
Processqualitycontrol
ISO/TC130
Framework for ISO/TC130 standards v1.0 2019 – page 10
Table3—OverviewofpublishedstandardsofISO/TC130(continued)
No. Standardno. Whodeveloped
it
Standardname Sub-category
31 ISO12641-1:2016 WG2
Graphictechnology-Prepressdigitaldataexchange—Colourtargetsforinputscannercalibration—Part1:Colourtargetsforinputscannercalibration
Processqualitycontrol
32 ISO12642-1:2011 WG2
Graphictechnology—Inputdataforcharacterizationoffour-colourprocessprinting—Part1:Initialdataset
Processqualitycontrol
33 ISO12642-2:2006 WG2
Graphictechnology—Inputdataforcharacterizationof4-colourprocessprinting—Part2:Expandeddataset
Processqualitycontrol
34 ISO12643-1:2009 WG5
Graphictechnology—Safetyrequirementsforgraphictechnologyequipmentandsystems—Part1:Generalrequirements
Ergonomics-Safety
35 ISO12643-2:2010 WG5
Graphictechnology—Safetyrequirementsforgraphictechnologyequipmentandsystems—Part2:Prepressandpressequipmentandsystems
Ergonomics-Safety
36 ISO12643-3:2010 WG5
Graphictechnology—Safetyrequirementsforgraphictechnologyequipmentandsystems—Part3:Bindingandfinishingequipmentandsystems
Ergonomics-Safety
37 ISO12643-4:2010 WG5
Graphictechnology—Safetyrequirementsforgraphictechnologyequipmentandsystems—Part4:Convertingequipmentandsystems
Ergonomics-Safety
38 ISO12643-5:2010 WG5
Graphictechnology—Safetyrequirementsforgraphictechnologyequipmentandsystems—Part5:Stand-aloneplatenpresses
Ergonomics-Safety
39 ISO12644:1996 WG4Graphictechnology—Determinationofrheologicalpropertiesofpasteinksandvehiclesbythefallingrodviscometer
Measurementandtesting
40 ISO12645:1998 WG3Graphictechnology—Processcontrol—Certifiedreferencematerialforopaqueareacalibrationoftransmissiondensitometers
Measurementandtesting
41 ISO12646:2015 WG3 Graphictechnology—Displaysforcolourproofing—Characteristics
Prepresstreatment
ISO/TC130
Framework for ISO/TC130 standards v1.0 2019 – page 11
Table3—OverviewofpublishedstandardsofISO/TC130(continued)
No. Standardno. Whodeveloped
it
Standardname Sub-category
42 ISO12647-1:2013 WG3
Graphictechnology—Processcontrolfortheproductionofhalf-tonecolourseparations,proofandproductionprints—Part1:Parametersandmeasurementmethods
Printingoperation
43 ISO12647-2:2013 WG3
Graphictechnology—Processcontrolfortheproductionofhalf-tonecolourseparations,proofandproductionprints—Part2:Offsetlithographicprocesses
Printingoperation
44 ISO12647-3:2013 WG3
Graphictechnology—Processcontrolfortheproductionofhalf-tonecolourseparations,proofsandproductionprints—Part3:Coldsetoffsetlithographyonnewsprint
Printingoperation
45 ISO12647-4:2014 WG3
Graphictechnology—Processcontrolfortheproductionofhalf-tonecolourseparations,proofandproductionprints—Part4:Publicationgravureprinting
Printingoperation
46 ISO12647-5:2015 WG3
Graphictechnology—Processcontrolforthemanufactureofhalf-tonecolourseparations,proofandproductionprints—Part5:Screenprinting
Printingoperation
47 ISO12647-6:2012 WG3
Graphictechnology—Processcontrolfortheproductionofhalf-tonecolourseparations,proofsandproductionprints—Part6:Flexographicprinting
Printingoperation
48 ISO12647-6:2012/Amd1:2015
WG3
Graphictechnology—Processcontrolfortheproductionofhalf-tonecolourseparations,proofsandproductionprints—Part6:Flexographicprinting/Amd1:2015
Printingoperation
49 ISO12647-7:2016 WG3
Graphictechnology—Processcontrolfortheproductionofhalftonecolourseparations,proofandproductionprints—Part7:Proofingprocessesworkingdirectlyfromdigitaldata
Prepresstreatment
50 ISO12647-8:2012 WG3
Graphictechnology—Processcontrolfortheproductionofhalf-tonecolourseparations,proofandproductionprints—Part8:Validationprintprocessesworkingdirectlyfromdigitaldata
Prepresstreatment
51 ISO/TR12705:2011 WG4 Graphictechnology—Laboratorytestmethod
forchemicalghostinginlithographyMeasurementandtesting
ISO/TC130
Framework for ISO/TC130 standards v1.0 2019 – page 12
Table3—OverviewofpublishedstandardsofISO/TC130(continued)
No. Standardno. Whodeveloped
it
Standardname Sub-category
52 ISO13655:2017 JWG8Graphictechnology—Spectralmeasurementandcolourimetriccomputationforgraphicartsimages
Measurementandtesting
53 ISO14298:2013 WG10 Graphictechnology—Managementofsecurityprintingprocesses Notrelevant
54 ISO/TR14672:2000 WG2 Graphictechnology—Statisticsofthenatural
SCIDimagesdefinedinISO12640
Datapreparationandexchange
55 ISO14861:2015 WG3 Graphictechnology—Requirementsforcoloursoftproofingsystems
Prepresstreatment
56 ISO15076-1:2010 JWG7
Imagetechnologycolourmanagement—Architecture,profileformatanddatastructure—Part1:BasedonICC.1:2010
Processqualitycontrol
57 ISO/TS15311-1:2019 WG3
Graphictechnology—Printqualityrequirementsforprintedmatter—Part1:Measurementmethodsandreportingschema
ConformityAssessment
58 ISO/TS15311-2:2018 WG3
Graphictechnology—Printqualityrequirementsforprintedmatter—Part2:Commercialprintapplicationsutilizingdigitalprintingtechnologies
ConformityAssessment
59 ISO/PAS15339-1:2015 WG3
Graphictechnology—Printingfromdigitaldataacrossmultipletechnologies—Part1:Principles
Printingoperation
60 ISO/PAS15339-2:2015 WG3
Graphictechnology—Printingfromdigitaldataacrossmultipletechnologies—Part2:Characterizedreferenceprintingconditions,CRPC1-CRPC7
Printingoperation
61 ISO15341:2014 WG4 Graphictechnology—Methodforradiusdeterminationofprintingcylinders Measurement
andtesting
62 ISO15397:2014 WG4 Graphictechnology—Communicationofgraphicpaperproperties
Mediaandmaterials
63 ISO15790:2004 WG6
Graphictechnologyandphotography-Certifiedreferencematerialsforreflectionandtransmissionmetrology—Documentationandproceduresforuse,includingdeterminationofcombinedstandarduncertainty
Measurementandtesting
ISO/TC130
Framework for ISO/TC130 standards v1.0 2019 – page 13
Table3—OverviewofpublishedstandardsofISO/TC130(continued)
No. Standardno. Whodeveloped
it
Standardname Sub-category
64 ISO/TR15847:2008 WG5
Graphictechnology—Graphicalsymbolsforprintingpresssystemsandfinishingsystems,includingrelatedauxiliaryequipment
Ergonomics-Safety
65 ISO15930-1:2001 WG2
Graphictechnology—Prepressdigitaldataexchange—UseofPDF—Part1:CompleteexchangeusingCMYKdata(PDF/X-1andPDF/X-1a)
Datapreparationandexchange
66 ISO15930-3:2002 WG2
Graphictechnology—Prepressdigitaldataexchange—UseofPDF—Part3:Completeexchangesuitableforcolour-managedworkflows(PDF/X-3)
Datapreparationandexchange
67 ISO15930-4:2003 WG2
Graphictechnology—PrepressdigitaldataexchangeusingPDF—Part4:CompleteexchangeofCMYKandspotcolourprintingdatausingPDF1.4(PDF/X-1a)
Datapreparationandexchange
68 ISO15930-6:2003 WG2
Graphictechnology—PrepressdigitaldataexchangeusingPDF—Part6:Completeexchangeofprintingdatasuitableforcolour-managedworkflowsusingPDF1.4(PDF/X-3)
Datapreparationandexchange
69 ISO15930-7:2010 WG2
Graphictechnology—PrepressdigitaldataexchangeusingPDF—Part7:Completeexchangeofprintingdata(PDF/X-4)andpartialexchangeofprintingdatawithexternalprofilereference(PDF/X-4p)usingPDF1.6
Datapreparationandexchange
70 ISO15930-8:2010 WG2
Graphictechnology—PrepressdigitaldataexchangeusingPDF—Part8:PartialexchangeofprintingdatausingPDF1.6(PDF/X-5)
Datapreparationandexchange
71ISO15930-8:2010/Cor1:2011
WG2
Graphictechnology—PrepressdigitaldataexchangeusingPDF—Part8:PartialexchangeofprintingdatausingPDF1.6(PDF/X-5)/Cor1:2011
Datapreparationandexchange
72 ISO/TR16066:2003 WG2
Graphictechnology—Standardobjectcolourspectradatabaseforcolourreproductionevaluation(SOCS)
Processqualitycontrol
73 ISO16612-1:2005 WG2
Graphictechnology—Variableprintingdataexchange—Part1:UsingPPML2.1andPDF1.4(PPML/VDX-2005)
Datapreparationandexchange
ISO/TC130
Framework for ISO/TC130 standards v1.0 2019 – page 14
Table3—OverviewofpublishedstandardsofISO/TC130(continued)
No. Standardno. Whodeveloped
it
Standardname Sub-category
74 ISO16612-2:2010 WG2
Graphictechnology—Variabledataexchange—Part2:UsingPDF/X-4andPDF/X-5(PDF/VT-1andPDF/VT-2)
Datapreparationandexchange
75 ISO16613-1:2017 WG2
Graphictechnology—Variablecontentreplacement—Part1:UsingPDF/Xforvariablecontentreplacement(PDF/VCR-1)
Datapreparationandexchange
76 ISO16759:2013 WG11Graphictechnology—Quantificationandcommunicationforcalculatingthecarbonfootprintofprintmediaproducts
Environmentandecology
77 ISO16760:2014 WG2Graphictechnology—Prepressdataexchange—PreparationandvisualizationofRGBimagestobeusedinRGB-basedgraphicsartsworkflows
Datapreparationandexchange
78 ISO16762:2016 WG12 Graphictechnology—Post-press—Generalrequirementsfortransfer,handlingandstorage Jobinitiation
79 ISO16763:2016 WG12 Graphictechnology—Post-press–Requirementsforboundproducts
Postpresshandling
80 ISO17972-1:2015 WG2 Graphictechnology—Colourdataexchange
format-Part1:RelationshiptoCxF3(CxF/X)
Datapreparationandexchange
81 ISO17972-2:2016 WG2
Graphictechnology—Colourdataexchangeformat(CxF/X)—Part2:Scannertargetdata(CxF/X-2)
Datapreparationandexchange
82 ISO17972-3:2017 WG2
Graphictechnology—Colourdataexchangeformat(CxF/X)—Part3:Outputtarget(CxF/X-3)
Datapreparationandexchange
83 ISO17972-4:2018 WG2
Graphictechnology—Colourdataexchangeformat(CxF/X)—Part4:Spotcolourcharacterisationdata(CxF/X-4)
Datapreparationandexchange
84 ISO18619:2015 JWG7 Imagetechnologycolourmanagement—Blackpointcompensation
Processqualitycontrol
85 ISO18620:2016 WG2 Graphictechnology–Prepressdataexchange—Toneadjustmentcurvesexchange
Prepresstreatment
86 ISO/TS18621-11:2019 JWG14 Imagequalityevaluationmethodsforprinted
matter—Part11:ColourgamutanalysisMeasurementandtesting
ISO/TC130
Framework for ISO/TC130 standards v1.0 2019 – page 15
Table3—OverviewofpublishedstandardsofISO/TC130(continued)
No. Standardno. Whodeveloped
it
Standardname Sub-category
87 ISO19302:2018 WG13 Graphictechnology—Colourconformityofprintingworkflows
ConformityAssessment
88 ISO19445:2016 WG2Graphictechnology—Metadataforgraphicartsworkflow—XMPmetadataforimageanddocumentproofing
Datapreparationandexchange
89 ISO19593-1:2018 WG2
Graphictechnology--UseofPDFtoassociateprocessingstepsandcontentdata--Part1:Processingstepsforpackagingandlabels Jobinitiation
90 ISO19594:2017 WG12
Graphictechnology—Testmethodforthedeterminationofthebindingstrengthforperfect-boundproducts—Page-pulltestworkingupwards
Measurementandtesting
91 ISO20294:2018 JWG15 Graphictechnology—Quantificationforcalculatingthecarbonfootprintofe-media
Environmentandecology
92 ISO20654:2017 WG3 Graphictechnology—Measurementandcalculationofspotcolourtonevalue
Measurementandtesting
93 ISO20677:2019 JWG7 Imagetechnology—Extensionstoarchitectureprofileformatanddatastructure
Datapreparationandexchange
94 ISO20690:2018 WG11Graphictechnology—Determinationoftheoperatingpowerconsumptionofdigitalprintingdevices
Environmentandecology
95 ISO21632:2018 WG11Graphictechnology—Determinationoftheenergyconsumptionofdigitalprintingdevicesincludingtransitionalandrelatedmodels
Environmentandecology
96 ISO21812-1:2019 WG2
Graphictechnology—PrintproductmetadataforPDFfiles—Part1:Architectureandcorerequirementsformetadata
Datapreparationandexchange
97 ISO/TS21830:2018 JWG7 Imagetechnologycolourmanagement--Black
pointcompensationforn-colourICCprofiles
Processqualitycontrol
98 ISO28178:2009 WG2Graphictechnology—ExchangeformatforcolourandprocesscontroldatausingXMLorASCIItext
Datapreparationandexchange
ISO/TC130
Framework for ISO/TC130 standards v1.0 2019 – page 16
NOTETheabovelistwasgivenontheISOwebsiteStandardand/orprojectofISO/TC130asofDecember312019.ItistobeupdatedbytheISOCentralSecretariataccordingtoISOprojectdatabase.
4 FrameworkforISO/TC130standards
Based on the above categorization, a framework for ISO/TC130 standards, intended or existing, isestablishedinthehierarchicalmodelshowninFigure3.
Figure3—FrameworkforISO/TC130standards
Therearesevensub-categoriesinthemultiple-processrelatedcategoryandsixsub-categoriesinthesingle-processrelatedcategory.ThepurposeofstandardsdevelopmentineachcategoryisoutlinedinTable4andTable5.
ISOTC130Standards
Multiple-processrelated
Terminology
Mediaandmaterials
Measurementandtesting
Processqualitycontrol
Conformityassessment
Ergonomicsandsafety
Environmentandecology
Single-processrelated
Jobinitiation
Datapreparationandexchange
Prepresstreatment
Printingoperation
Postpresshandling
Productpackingandlogistics
ISO/TC130
Framework for ISO/TC130 standards v1.0 2019 – page 17
Table4—Purposeofstandardsdevelopmentofthemultiple-processrelatedcategory
Sub-category Purpose
Terminology Defining the relevant concept for similar interpretation indifferentprocesses
Mediaandmaterials Establishingprintabilityrequirementsformediaandmaterialsusedintherelatedprintingprocess
Measurementandtesting Givingprovisionsconcerningthemethodsofmeasurementandtesting,relevantdevicesandmaterialstoensuretheresultsareaccurateandreliable
Processqualitycontrol Establishingrequirementsandmethodsforqualitycontrolintheprintworkflow,suchascolourmanagement
Conformityassessment Developing conformity assessment guidelines for printedproducts, processes, services, persons and systems; these aredeterminedtomeettherelevantstandardsorspecifications
Ergonomicsandsafety Establishing requirements for a healthy and safe workingenvironment
Environmentandecology Evaluatingtheimpactofprintingprocessesandprintedproductsontheenvironmentwiththeaimofthesustainabledevelopmentoftheindustry
Table5—Purposeofstandardsdevelopmentofthesingle-processrelatedcategory
Sub-category Purpose
Jobinitiation Providingguidelinesforgraphicdesignersorrelevantpartiestoensurethatthedesireditemsfitintotheproductionlinesothattheyareprocessed,printedandfinishedcorrectly
Datapreparationandexchange
Definingfileformatsfordataexchange,makingitpossiblefordatatobesharedintherelevantreproductionprocesses
Prepresstreatment Establishingrequirementsfordataprocessing,printingformmaking,proofingandcross-mediapublishing
Enablingtheprocesseddatatomatchthefinaloutputdevices
Printingoperation Establishingrequirementsforprocesscontroltoensureprintingonvarioussubstrateswithwell-definedparameters
Postpresshandling Establishingrequirementsforsurfacefinishing,bindingandconvertingoperationstoensurereliableresults
Productpackingandlogistics
Establishingrequirementsforpackinganddeliveryoffinishedproductstofacilitateintegrationoflogisticsinaninternet-basedenvironment
ISO/TC130
Framework for ISO/TC130 standards v1.0 2019 – page 18
5 WorkinggroupsforISO/TC130standardsdevelopmentWorkinggroups(WGs),Jointworkinggroups(JWGs)andTaskForces(TFs)areestablishedforstandardsdevelopmentandeachWG,JWGorTFundertakesspecifictasks.TheactiveISO/TC130WGsandTFsaregiveninTable6,thejointworkinggroups(JWGs)undertheresponsibilityofISO/TC130aregiveninTable7, the jointworking groupsunder the responsibility anotherTechnicalCommitteewithTC130participationaregiveninTable8.ThetitleofeachWG(JWG,TF)suggests,tosomedegree,thesphereofactivity.
NOTE TheISOwebpagethatshowsworkinggroupscanbefoundunderthelink:StructureofISO/TC130
Table6—ActiveworkinggroupsandtaskforcesofISO/TC130
Groupno. Grouptitle
ISO/TC130TF3 Workflowstandardsroadmap
ISO/TC130/WG1 Terminology
ISO/TC130/WG2 Prepressdataexchange
ISO/TC130/WG3 Processcontrolandrelatedmetrology
ISO/TC130/WG4 Mediaandmaterials
ISO/TC130/WG5 Ergonomics-Safety
ISO/TC130/WG11 Environmentalimpactofgraphicstechnology
ISO/TC130/WG12 Postpress
ISO/TC130/WG13 Printingconformityassessmentrequirements
Table7—JointworkinggroupsundertheresponsibilityofISO/TC130
Groupno. Grouptitle
ISO/TC130/JWG7 Colourmanagement(JointISO/TC130-ICCWG)
ISO/TC130/JWG10 Managementofsecurityprintingprocesses(JointISO/TC130–TC292)
ISO/TC130/JWG14 Printqualitymeasurementmethods (Joint ISO/TC130 -TC42 - ISO/IECJTC1/SC28WG)
ISO/TC130
Framework for ISO/TC130 standards v1.0 2019 – page 19
Table8—JointworkinggroupsundertheresponsibilityofanotherCommittee
Groupno. Grouptitle
ISO/TC6/JWG12
Deinkabilitypotential(JointISO/TC6–TC130WG)
ISO/TC6/SC2/WG39
Printabilitytesting(JointISO/TC6/SC2–TC130WG)
ISO/TC42/JWG20 Digitalstillcameras(JointISO/TC42–IECWG)
ISO/TC42/JWG21 Density measurements (Revision of ISO 5 series) (JointISO/TC42–TC130WG)
ISO/TC42/JWG22
Colourmanagement(JointIEC/TC100-ISO/TC42-TC130WG)
ISO/TC42/WG23
Extended colour encodings for digital image storage,manipulationandinterchange(JointISO/TC42-TC130-CIEWG)
ISO/TC42/WG25
Use of XMP for digital photography (Joint ISO/TC42 - TC130)
ISO/TC42/JWG27
Imagepermanence&durabilitytestmethodsandspecificationsfordigitalprintsincommercialapplications(JointISO/TC42-ISO/IEC/JTC1/SC28–ISO/TC130WG)
ISO/TC171/SC2/WG5 Documentmanagementapplications–Applicationissues–PDF/A(JointISO/171/SC2–TC42–TC46/SC11–TC130WG