251-40/B
10
8
9
7
Click
IP66230V
50/60Hz
L N
8-9 mm
1,5–2,5 mm 2
21
Click
Click
3
11
Always close the clips symmetrically from the middle to the
sides of the lamp!
Always close up both opposite clips at once
12Don‘t open when the luminaire is alive!
Installation can only be carried out by an authorized person and
according to the mounting instructions. Any other installation is
considered to be improper. For well installation and good luminaire
work is necessary ensure a planarity of a mounting surface. Make
sure that the luminaire is always disconnected from the power
supply before the installation work. Do not use the luminaire if
damaged or if damaged the power cable. Only damp micro�ber cloth
can be used for cleaning. technical changes are subjected without
notice. Do not dispose the luminaire or its parts as household
waste, but make the proper recycling.
The light source in this luminaire may be replaced only by the
manufacturer or its contractual service technician or similarly
quali�ed person!
612mm 2600 32 50 52 85612mm 3200 4400 10 16 16 261172mm 5200
6400 8800 10 16 16 26
1452mm 6500 8000 11000
∑lm ∑lm ∑lm
16A B 10A C 16A C 10A B
1172mm10 16 16 26
1452mm
12800
16000
11
11
18
18
18
18
30
30
Table of maximal number of luminaires in one lineLength
∑ luminaires
∑ luminaires
∑ luminaires
∑ luminaires
FORNAX
Zero-crossing
point operation
K
Automatic switching based on motion and light level.
Zero-crossing point operation helps protect the sensor
against in-rush current.
Super Compact size makes it suitable to fix within most
luminaires.
4-pole press-in terminal (L, N, N, L'), easy assembly.
Detection area, time delay and daylight threshold can
be precisely set via DIP switch.
Wide detection area, range up to 12m in diameter.
Introduction
MC030S E is an innovative and active motion detector
with HF system 5.8GHz. Motion can be detected through
plastic, glass and thin non-metal materials.
The sensor supplies a simple energy-saving solution to
use l ight only when and where you need i t . I t
automatically switches on/off light based on motion and
ambient light level. Can control all kinds of lamps, for
example, halogen, fluorescent and LED lights. Compact
size and small casing, suitable to fix within most
luminaires. 4-pole press-in terminal (L, N, N, L'), very
easy to install.
The high qual i ty relay is part icular ly suitable for
commercial use with switching power up to 400W for
LEDs and fluorescent lamps and up to 800W for
incandescent lamps.
MC030S EON-OFF Function / Smart Version
Light SensorMax.6M Hold Time 5s~30min
AutomaticOn/Off
6m
Mounting Height 6m Max.
555 Years
Guarantee
Years Guarantee
ON/OFF
ON -OFF Function
Motion sensor MC030S E + LED driver or ballast (Any brand)
MC030S E is an innovative motion sensor, switch on the light on
detection of movement, and switch off after a hold time when there
is no motion detected. As built-in daylight sensor can read
brightness value, the sensor does not switch on the light if with
sufficient natural light.
Wiring scheme
Detection Pattern
With sufficient light, the lamp doesn't switch on.
After hold time, the sensor switches off the lamp when no motion
is detected.
1 2 3
10%
25%50%
75%
100%
Ceiling mounting pattern (Unit: m)Suggested installation height:
3m
Wall mounting pattern (Unit: m)Suggested installation height:
1.5m
0
2
4
8
6
2
4
6
8
10 12 14
10
12
14
10
12
14
With insufficient ambient light, the sensor switches on the
lampwhen motion is detected.
10%25%
50%
75%
100%
L N
L N
Control gear
Max. 400W
L LN N
Control gear Control gear
![HUBBLE SPACE TELESCOPE PHOTOMETRY OF THE FORNAX …ganymede.nmsu.edu/holtz/talks/lgpapers/wget/1999AJ... · 1999. 10. 19. · Fornax and this wide range in [Fe/H], BEA85 noted that](https://img.pdfslide.us/doc/110x75/60cd7cb0ae2fce3aa44074d5/hubble-space-telescope-photometry-of-the-fornax-1999-10-19-fornax-and-this.jpg)
