Embed Size (px)
Citation preview
Formatting G‐scan SD memory card
Process:
1. Backup your data first. 1‐1. REMOVE SD card from G‐scan Module, and connect it to PC using the supplied SD card reader.
1‐2. Go to “My Computer” and open SD card drive as shown below.
Warning
Formatting the SD card will completely wipe out every data on the SD card.
Therefore, please back up all important files such as images and recorded files before running this process or doing anything in general that would possibly result in losing data.
1‐3. Copy both (G‐scanImage, G‐scanRecord) folders from Removable Disk (G‐scan SD card).
1‐4. Create a new folder called “BackUp” in Desktop. To create a new folder, right‐click on the
Desktop ‐> New ‐> Folder.
1‐5. Rename the Folder as “ BackUp”. Then open BackUp folder.
1‐6. Paste “G‐scanImage” and “G‐scanRecord” folders in BackUp Folder.
2. Format SD card. 2‐1. Format SD card by selecting “Format” in right‐click menu .
2‐2.On the next pop‐up, leave “Volume Label” and “Format Options” blank. Then press [Start] button. Press [OK] to start.
2‐3. Formatting will start. Press [OK] button to finish. Format is completed.
3. RECOVERY – PC Utility ‐ This G scan‐Util (PC Utility Software) is supplied with the G‐scan purchase.
3‐1. Start G‐scan Util program by double‐clicking the G‐scan Util icon.
3‐2. Press ‘RECOVERY’ button.
3‐3. When RECOVERY is finished, press “Close” button.
4. Internet Update 4‐1. Click [Start Update] button, then click “Internet Update” button to start.
4‐2. Internet Update file is downloaded. Click [OK] when finished.
5. Restore backup data. 5‐1. Drag backup data into SD card (Removable Disk) to restore.
5‐2. Click “Yes to all” button to place backup data in SD card (Removable Disk).
5‐3. Backup files are restored.
If you need any assistance, please contact to [email protected] Thank you. Best Regards. GDS Management Team
