FORM H-5A MANUFACTURER’S MASTER DATA REPORT FOR BOILERSCONSTRUCTED FROM CAST ALUMINUM

As Required by the Provisions of the ASME Boiler and Pressure Vessel Code Rules, Section IV

1. Manufactured and certified by

2. Boiler type or model no.

Section Designation(List Each Individual Section

in Boiler Assembly)

Section Designation Test No. 1 Test No. 2

Bursting Pressure, Metal Thickness Measured at Break orFracture, and Weight of Section

Metal ThicknessAccording to Drawing

Pattern and/orPart No.

Test No. 3

Bar forTest No. 3

3. Boiler section data:

4. Boiler section bursting data:

5. Minimum specified tensile strength .

(a)

(a)

Section DesignationBar for

Test No. 1Bar for

Test No. 2

(a)

(b)

(c)

(d)

(e)

(b)

(c)

(d)

(e)

(b)(c)(d)(e)

(name and address of manufacturer) (foundry identification)

7. Specification no. of aluminum alloy

8. Maximum allowable working pressure of boiler1

1 Determined by using formula in HA-402 and by selection of lowest values of bursting pressure from tests recorded in item 4 of this report.

6. Tensile strength of associated test bars:

(07/15)

Page of

FORM H-5A (Back)

10. Examination data:

12. ASME Certificate of Authorization no. to use the Certification Mark with H designator (cast aluminum).

NOTE: Signature of designed responsible engineering head of the manufacturer must be notarized.

Certificate expires

(a) Test engineer

9. Sketch of section with lowest bursting pressure (show location of failure)

11. Manufacturer’s certification:

Date

Certified to be true record

,

,

(07/15)

(name)

(b) Witness of test(s)

(c) Date(s) of destruction tests

(name)

(name and title)

Manufactured by

Boiler type or model no.

Page of

Page: of: 1 Manufactured and certified by: name and address of manufacturer foundry identification: 2 Boiler type or model no: a: b: c: d: e: 1: 2: 3: 4: 5: 1_2: 2_2: 3_2: 4_2: 5_2: a_2: b_2: c_2: d_2: e_2: 1_3: 2_3: 3_3: 4_3: 5_3: 6: 7: 8: 9: 10: 11: 12: 13: 14: 15: 5 Minimum specified tensile strength: a_3: b_3: c_3: d_3: e_3: 1_4: 2_4: 3_4: 4_4: 5_4: 1_5: 2_5: 3_5: 4_5: 5_5: 6_2: 7_2: 8_2: 9_2: 10_2: 11_2: 12_2: 13_2: 14_2: 15_2: 1_6: 2_6: 3_6: 4_6: 5_6: 1_7: 2_7: 3_7: 4_7: 5_7: 6_3: 7_3: 8_3: 9_3: 10_3: 11_3: 12_3: 13_3: 14_3: 15_3: 1_8: 2_8: 3_8: 4_8: 5_8: 7 Specification no of aluminum alloy: 8 Maximum allowable working pressure of boiler1: Page_2: of_2: Manufactured by: Boiler type or model no: a Test engineer: b Witness of tests: c Dates of destruction tests 1: c Dates of destruction tests 2: c Dates of destruction tests 3: Date: undefined: name and title: 12 ASME Certificate of Authorization no: Certificate expires: undefined_2: