This is how i like to trade 1: Wait for the arrow to appear 2:Then the arrow should be outside the dochan channel generalised version which is NON repainting 3: Then look at macd for a signal in the direction of the trade for eg: if the arrow comes put then the macd should close red (again macd is non repainting after it closes ) 4:Look for sefc bull bears indicator i have reduced the setting so it reacts fast to price it sometimes comes late but no problem 5: Then wait for the fisher to change colour eg: if the arrow is put wait for the first bar to close red 6: The most important indicator is mbfx timing indicator . you should always take a trade if it is in the overbought or oversold areas. eg: if the arrow is put it should be in the oversold area. at least it should touch the areas for eg: 70-100 area and 30-0 u can refer the pic 7: The bottom sefc bull bear indicator i changed the setting so it becomes stable and non repainting . if you want to trend trade u can use this as a filter for your trades so you can have in mind few trades per day and u can take the best setups eg: if the arrow is put and the bottom sefc bull bear is green do not take the trade this is optional. HOPE THIS HELP U GUYS