FOREST PRODUCTS INDUSTRY · WD116 8.000 55,000 9,200 15 14.5 15.38 14.12 .75 .38 12.75 1.75 ... CHAIN SPROCKET WIDTH OF WIDTH OF OF CENTER LINE LINE OF OF NO. PITCH FACE COTTERED

UNIKINGCANADA.COM

FOREST PRODUCTS INDUSTRYSHARP TOP CHAIN / CAST ALLOY & WELDED STEEL CHAIN

SUS78* * 2.609 19,000 2,700 46 3.9 2.88 1.96 .50 .25 1.12 .86 1.12

AVERAGE RATED APPROX. AVERAGE LENGTH SIDE SIDE MAX.CHAIN ULTIMATE WORKING LINKS IN WEIGHT OVERALL OF RIVET BAR BAR BARREL SPKT.NO. PITCH STRENGTH LOAD 10 FEET PER FOOT WIDTH BEARING DIAMETER THICKNESS WIDTH DIAM. FACE

LBS. LBS. JK X D T F H A

WH188 2.609 30,000 2,850 46 3.8 2.69 1.62 .50 .25 1.12 .88 .88WR188 2.609 20,000 1,400 46 3.8 2.69 1.62 .50 .25 1.12 .88 .88WH78 2.609 30,000 3,500 46 4.0 3.00 2.00 .50 .25 1.12 .88 1.12WR78 2.609 20,000 3,000 46 4.0 3.00 2.00 .50 .25 1.12 .88 1.12WH78-4 4.000 30,000 3,500 30 4.0 3.00 2.00 .50 .25 1.12 .88 1.12WR78-4 4.000 25,900 3,000 30 4.0 3.00 2.00 .50 .25 1.12 .88 1.12WH82 3.075 36,000 4,400 39 4.8 3.25 2.25 .56 .25 1.25 1.06 1.25WR82 3.075 25,000 3,800 39 4.8 3.25 2.25 .56 .25 1.25 1.06 1.25WH124 4.000 69,000 7,200 30 8.3 4.25 2.75 .75 .38 1.50 1.25 1.50WR124 4.000 47,000 6,200 30 8.3 4.25 2.75 .75 .38 1.50 1.25 1.50WH124XHD 4.063 100,000 10,500 30 14.7 4.75 3.00 1.00 .50 2.00 1.62 1.62WR124XHD 4.063 81,000 9,000 30 14.7 4.75 3.00 1.00 .50 2.00 1.62 1.62WH111 4.760 91,000 8,850 26 9.5 4.88 3.38 .75 .38 1.75 1.25 2.00WR111 4.760 62,000 7,500 26 9.5 4.88 3.38 .75 .38 1.75 1.25 2.00WH106 6.000 69,000 7,200 20 7.0 4.25 2.75 .75 .38 1.50 1.25 1.62WR106 6.000 47,000 6,200 20 7.0 4.25 2.75 .75 .38 1.50 1.25 1.62WH106HD 6.000 92,500 7,875 20 9.0 4.75 3.00 .75 .50 1.50 1.25 1.62WR106HD 6.000 60,700 6,750 20 9.0 4.75 3.00 .75 .50 1.50 1.25 1.62WH106XHD 6.000 100,000 10,500 20 11.8 4.88 3.00 1.00 .50 2.00 1.62 1.62WR106XHD 6.000 75,000 9,000 20 11.8 4.88 3.00 1.00 .50 2.00 1.62 1.62WH110 6.000 69,000 7,875 20 7.2 4.62 3.00 .75 .38 1.50 1.25 1.88WR110 6.000 47,000 6,750 20 7.2 4.62 3.00 .75 .38 1.50 1.25 1.88WH132 6.050 115,000 15,300 20 14.2 6.25 4.38 1.00 .50 2.00 1.62 2.88WR132 6.050 78,000 13,000 20 14.2 6.25 4.38 1.00 .50 2.00 1.62 2.88WH132HD 6.050 139,500 16,200 20 16.4 6.75 4.62 1.00 .62 2.00 1.62 2.88WR132HD 6.050 94,500 13,875 20 16.4 6.75 4.62 1.00 .62 2.00 1.62 2.88WH150 6.050 116,000 15,300 20 16.8 6.25 4.38 1.00 .50 2.50 1.62 2.88WR150 6.050 78,000 13,000 20 16.8 6.25 4.38 1.00 .50 2.50 1.62 2.88WH150HD 6.050 168,000 16,200 20 19.3 6.75 4.62 1.00 .62 2.50 1.62 2.88WR150HD 6.050 114,000 13,875 20 19.3 6.75 4.62 1.00 .62 2.50 1.62 2.88WH150XHD 6.050 161,000 18,200 20 19.7 6.75 4.62 1.12 .62 2.50 1.62 2.88WH155 6.050 145,000 17,750 20 20.0 6.50 4.50 1.12 .50 2.50 1.75 3.00WH159 6.125 230,000 20,250 20 28.0 6.97 4.63 1.25 .62 3.00 2.00 3.00

All Chains Available in Stainless Steel * * Cottered Only

316 CAST STAINLESS STEEL

2

Welded Steel Mill Chain

2 | Forest Industry Chains

unikingcanada.com

ATTACHMENT CHAIN WEIGHTNUMBER NUMBER PER FOOT

LBS. A D E F G H K M R T X Y Z

A1 WH78 4.97 2.00 .38 1.25 .50 .81 1.25 — — .56 .25 — — —A1 WH82 6.50 2.13 .38 1.75 .62 .94 1.50 — — .62 .25 — — —A1 WH124 8.40 2.62 .62 2.00 .62 1.13 1.81 — — .75 .38 — — —A2 WH78 4.50 2.00 .38 2.13 .50 .78 .41 — 1.13 .56 .25 — — —A2 WH82 6.00 2.13 .38 2.25 .62 .94 .50 — 1.25 .62 .31 — — —A2 WH124 10.0 2.62 .38 3.00 .88 1.13 .88 — 1.94 .75 .38 — — —A2 WH132 17.0 3.75 .50 4.00 .75 1.50 1.62 — 2.75 1.00 .50 — — —A225 WH124 8.90 4.00 — 2.00 1.94 — 2.00 — — .75 .50 — 2.25 .88F10 WH82 4.80 — — 1.25 — — .94 — — .63 .25 10.25 — —F30 WH78 9.90 — — 1.00 — 2.69 .81 — — .56 2.13 3.00 — —F659 WH124 13.1 — — 1.75 — 4.75 .50 — — .75 — 6.59 — —

F10

F659

A1 A2 A225

We are able tocustom manufactureattachments per yourspecific request.F30

Meeting the Industry Challenge...

— Experience the Advantage Today!

Mill Chain Attachments

Setting the standard for design and innovation of industrial chains for nearly 50 years. Through design and testing, all chains are engineered to maximize strength, fatigue life, and wear resistance.


unikingcanada.com

A11-CRADLE SIDE LIFT CHAIR

C-CRADLE

K1 K2

RR

H2

ATTACHMENT CHAIN WEIGHTNUMBER NUMBER PER FOOT

LBS. A D E F G H K M R T X Y Z

H2 WH78 4.75 — — — — 3.56 .31 1.00 — .56 .25 — — —H2 WH82 9.00 — — — — 3.62 .62 1.13 — .62 .19 — — —K1 WH78 4.97 2.00 .38 1.25 .50 .81 1.25 — — .56 .25 — — —K1 WH82 6.50 2.13 .38 1.75 .62 .94 1.50 — — .62 .25 — — —K1 WH124 11.70 2.62 .62 2.00 .62 1.13 1.81 — — .75 .38 — — —K2 WH78 5.00 2.00 .38 2.13 .50 .78 .41 — 1.13 .56 .25 — — —K2 WH82 8.00 2.13 .38 2.25 .62 .94 .50 — 1.25 .62 .31 — — —K2 WH124 12.00 2.62 .38 3.00 .88 1.13 .88 — 1.94 .75 .38 — — —K2 WH132 19.00 3.75 .50 4.00 .75 1.50 1.62 — 2.75 1.00 .50 — — —RR WH78 4.70 — — — — 1.50 .75 — — .56 .25 — — —RR WH82 7.00 — — — — 1.75 .81 — — .62 .25 — — —RR WH124 10.00 — — — — 1.88 1.50 — — .75 .38 — — —A11-Cradle WH132 26.00 — — 2.50 — 2.00 2.35 — — 1.00 .50 11.00 — —C-Cradle WH132 29.00 — — 3.50 — 2.00 2.62 — — 1.00 1.00 11.00 — —Side Lift Chair WH132 17.50 — — — — 11.00 — — — 1.00 9.25 — — —

We are able tocustom manufactureattachments per yourspecific request.

Mill Chain Attachments


unikingcanada.com

The AdvantageSidebars are pierced and broach to a precise pitch tolerance to insure proper strand length and give morebearing surface in the hole to increase surface area for the press fit of the pin. Automated welding is used onthe construction of the welding of the links. Reverse barrel configuration also available. Round barrels available.

W1 AttachmentAVERAGE RATED AVERAGE LENGTH MAX.ULTIMATE WORKING APPROX. WEIGHT OVERALL OF RIVET SIDE BAR SPKT. SIDE BAR

CHAIN STRENGTH LOAD LINKS IN PER WIDTH BEARING DIAMETER THICKNESS FACE WIDTHNUMBER PITCH LBS. LBS. 10 FEET FOOT JK X A E D F

WD102 5.000 51,000 8.500 24 11.8 9.25 7.75 .75 .38 6.38 1.50WD104 6.000 51,000 8,500 20 8.7 6.88 5.38 .75 .38 4.12 1.50WD110 6.000 51,000 8.500 20 12.0 11.88 10.38 .75 .38 9.00 1.50WDH110 6.000 60,000 10,000 20 12.0 11.88 10.38 .75 .38 9.00 1.50WDH112 8.000 60,000 10,000 15 9.8 11.88 10.38 .75 .38 9.00 1.50WD116 8.000 55,000 9,200 15 14.5 15.38 14.12 .75 .38 12.75 1.75WHD118 8.000 90,000 15,000 15 19.8 16.75 14.88 .88 .50 13.25 2.00WD120 6.000 70,000 11,700 20 19.4 12.00 10.12 .88 .50 8.50 2.00WD122 8.000 70,000 11,700 15 16.0 12.00 10.12 .88 .50 8.50 2.00WD480 8.000 70,000 11,700 15 18.1 14.62 12.75 .88 .50 11.00 2.00WDH480 8.000 90,000 15,000 15 18.1 14.62 12.75 .88 .50 11.00 2.00WDH480XHD 8.000 134,000 22,300 15 21.4 14.88 13.00 1.00 .62 11.00 2.00

C1 Attachment

MAX. HEAD OF END OF PIN END OF PIN OVERALLALLOWABLE OVERALL DIAMETER OVERALL HEIGHT DIAMETER PIN TO TO CENTER TO CENTER THICKNESS LENGTH

CHAIN SPROCKET WIDTH OF WIDTH OF OF CENTER LINE LINE OF OFNO. PITCH FACE COTTERED PIN RIVETED SIDEBAR BARREL LINE COTTERED RIVETED SIDEBAR BARREL

C55 1.631 0.69 2.06 0.375 1.97 0.75 0.72 0.97 1.09 1.00 0.19 1.25C77 2.308 0.69 2.38 0.437 2.25 0.88 0.72 0.97 1.19 1.12 0.19 1.25C102B 4.000 2.00 4.56 0.625 4.38 1.50 0.97 2.06 2.28 2.19 0.38 2.91C111 4.760 2.38 5.44 0.750 5.00 1.75 1.44 2.38 2.72 2.50 0.38 3.38C131 3.075 1.12 3.75 0.625 3.50 1.50 1.22 1.62 1.88 1.75 0.38 2.06C188 2.609 0.94 2.69 0.500 2.50 1.12 0.88 1.25 1.44 1.25 0.25 1.56C132 6.050 3.04 6.75 1.00 6.50 2.00 1.72 3.06 3.38 3.25 0.50 4.31

Welded Steel Drag Chain

Combination Chains


unikingcanada.com

HEADOF COTTERED RIVETEDSTYLE PITCH OVERALL OVERALL HEIGHT DIAMETER PIN TO END OF END OF THICKNESS DISTANCE LENGTH

CHAIN OF IN WIDTH DIAMETER WIDTH OF OF CENTER PIN TO PIN TO OF BETWEEN OFNO. TOP INCHES COTTERED OF PIN RIVETED SIDEBAR ROLLER LINE CENTER LINE CENTER LINE SIDEBAR SIDEBARS BUSHINGS

81X 2 2.609 2.08 0.438 2.00 1.12 0.91 1.00 1.08 1.00 0.16 1.07 1.3881XH 2 2.609 2.50 0.438 2.38 1.27 0.91 1.19 1.31 1.19 *.31/∆.22 1.07 1.7281XHD 2 2.609 2.75 0.438 2.62 1.27 0.91 1.31 1.44 1.31 0.31 1.07 1.72

HEAD OF MAX. OVERALLOVERALL PIN TO DIAMETER DIAMETER ALLOWABLE LENGTH HEIGHT HEIGHT CENTER THICKNESS

STYLE WIDTH CENTER OF OF SPROCKET OF OF OF OF PIN OVERALL OFCHAIN OF RIVETED LINE-RIVETED BARREL PIN FACE BARREL SIDEBAR SHOULDER TO TOP HEIGHT SIDEBARNO. TOP PITCH A C Db D E E1 F F1 J P T

C55A A 1.631 2.00 1.00 0.72 0.375 0.69 1.25 0.75 0.75 0.88 1.25 0.19C55B B 1.631 2.00 1.00 0.72 0.375 0.69 1.25 0.75 0.75 0.88 1.25 0.19C55D D 1.631 2.00 1.00 0.72 0.375 0.69 1.25 0.88 0.88 0.88 1.25 0.19

END OF HEAD OF MAX. OVERALLOVERALL PIN TO PIN TO DIAMETER DIAMETER ALLOWABLE LENGTH HEIGHT CENTER WIDTH

STYLE WIDTH CENTER CENTER OF OF SPROCKET OF OF OF PIN OVERALL OFCHAIN OF RIVETED LINE-RIVETED LINE BARREL PIN FACE BARREL SIDEBAR TO TOP HEIGHT TOPNO. TOP PITCH Ar Br C Db Dp E E1 F J P W

H78A A 2.609 3.25 1.62 1.56 0.88 0.500 1.12 1.88 1.00 1.12 1.69 2.81H78B B 2.609 3.25 1.62 1.56 0.88 0.500 1.12 1.88 1.00 1.12 1.69 2.81H130 A 4.000 3.25 1.62 1.62 1.00 0.500 1.00 1.62 1.06 1.16 1.69 2.81H131 A 4.00 4.00 2.06 1.94 1.25 0.625 1.62 2.50 1.56 1.47 2.25 3.44H138 B 4.00 3.25 1.62 1.62 1.00 0.500 1.00 1.62 1.06 1.16 1.69 2.81

C55A

H7 8AH130H131

H7 8AH7 8BH130H131H138

H7 8BH138

C55BC55D

81X Series Chain

Combination Transfer Chain (Rooftop)

“H”Class Transfer Chain (Rooftop)


unikingcanada.com

CHAIN SIZE (S)NUMBER PITCH APPROX. MAX. BORE @OF TEETH DIAMETER WEIGHT REG. PRICE

WD110, WDH110 6 12.00 130 2-15/16”WD110, WDH110 7 13.83 150 2-15/16”WD110, WDH110 8 15.68 185 2-15/16”WD110, WDH110 9 17.54 250 2-15/16”WD110, WDH110 10 19.42 270 2-15/16”WD110, WDH110 11 21.30 289 2-15/16”WD110, WDH110 12 23.18 305 2-15/16”WD480, WDH480, WDH480HD 7 18.44 260 2-15/16”WD480, WDH480, WDH480HD 8 20.90 320 2-15/16”WD480, WDH480, WDH480HD 9 23.39 370 2-15/16”WD480, WDH480, WDH480HD 10 25.89 420 2-15/16”WD480, WDH480, WDH480HD 11 28.40 480 2-15/16”


WR78, WH78 7 6.01 11 1-15/16”WR78, WH78 8 6.82 15 2-3/16”WR78, WH78 9 7.63 17 2-11/16”WR78, WH78 10 8.44 19 2-11/16”WR78, WH78 11 9.26 22 2-11/16”WR78, WH78 12 10.08 30 2-11/16”WR78, WH78 13 10.90 33 2-11/16”WR78, WH78 14 11.72 35 2-11/16”WR78, WH78 15 12.55 40 2-11/16”WR78, WH78 20 16.68 70 2-15/16”W82, WH82 8 8.04 20 2-15/16”W82, WH82 9 8.99 30 2-15/16”W82, WH82 10 9.95 34 2-15/16”W82, WH82 11 10.91 40 2-15/16”W82, WH82 12 11.88 50 3-7/16”W82, WH82 13 12.85 60 3-7/16”W82, WH82 14 13.82 65 3-7/16”W82, WH82 15 14.79 68 3-7/16”W82, WH82 20 19.66 88 3-7/16”WH78-4 6 8.08 25 2-7/16”WH78-4 8 10.56 39 2-15/16”WH78-4 10 10.07 50 2-15/16”WH78-4 12 15.61 72 3-7/16”WH78-4 13 16.88 80 3-7/16”WH78-4 16 20.71 100 3-7/16”WH124XHD, WR124XHD 19 24.68 170 3-15/16”WH124XHD, WR124XHD 20 25.97 179 3-15/16”WH124, WR124 7 9.22 35 2-11/16”WH124, WR124 8 10.45 43 2-15/16”WH124, WR124 9 11.70 55 2-15/16”WH124, WR124 10 12.94 70 3-7/16”WH124, WR124 11 14.20 80 3-7/16”WH124 WR124 12 15.45 87 3-15/16”WH124, WR124 13 16.71 95 3-15/16”WH124, WR124 14 17.98 100 3-15/16”WH124, WR124 15 19.24 110 3-15/16”WH124, WR124 20 25.57 166 3-15/16”

Cast Iron Chilled RimOver 400 Brinnell Hardness1/4” Chill Depth

Segmental Sprocket andTraction Wheel Patterns,Chain Saver Flanged Sprockets(Split Construction Available)

Cast Iron Chilled RimOver 400 Brinnell Hardness1/4” Chill Depth

Drum, Drum Flange Sprockets,Traction Wheels(Split Construction Available)


WH106HD, WR1O6, WR106HD, WH110 8 15.68 80 2-15/16”WH106HD, WR106, WR106HD, WH110 9 17.54 97 2-15/16”WH106HD, WR106, WR106HD, WH110 10 19.42 115 2-15/16”WH106HD, WR106, WR106HD, WH110 11 21.30 135 2-15/16”WH106HD, WR106, WR106HD, WH110 12 23.18 150 2-15/16”WH106HD, WR106, WR106HD, WH110 13 25.07 169 3-7/16”WH132, WH132HD, WH132XHD, WR132, WR132HD 8 15.81 120 3-7/16”WH132, WH132HD, WH132XHD, WR132, WR132HD 9 17.69 140 3-7/16”WH132, WH132HD, WH132XHD, WR132, WR132HD 10 19.58 150 3-7/16”WH132, WH132HD, WH132XHD, WR132, WR132HD 11 21.47 160 3-7/16”WH132, WH132HD, WH132XHD, WR132, WR132HD 12 23.38 200 3-7/16”WH132, WH132HD, WH132XHD, WR132, WR132HD 13 25.28 230 3-7/16”WH132, WH132HD, WH132XHD, WR132, WR132HD 14 27.19 255 3-7/16”WH150, WH150HD, WH150XHD, WR150, WR150HD 8 15.81 120 3-7/16”WH150, WH150HD, WH150XHD, WR150, WR150HD 9 17.69 140 3-7/16”WH150, WH150HD, WH150XHD, WR150, WR150HD 10 19.58 150 3-7/16”WH150, WH150HD, WH150XHD, WR150, WR150HD 11 21.47 160 3-7/16”WH150, WH150HD, WH150XHD, WR150, WR150HD 12 23.38 200 3-7/16”WH150, WH150HD, WH150XHD, WR150, WR150HD 13 25.28 230 3-7/16”WH150, WH150HD, WH150XHD, WR150, WR150HD 14 27.19 255 3-7/16”

Mill Chain Sprockets

Drag Chain Sprockets


unikingcanada.com

HIGH STRENGTH

ALLOY STEEL

AVERAGE RATED AVERAGEULTIMATE WORKING WEIGHT

CHAIN STRENGTH LOAD PERNUMBER LBS. LBS. FOOT A B C D E

102HVY 38,000 6,900 .99 1.375 1.26 .55 .354 .709142ST 73,000 13,000 2.45 1.97 1.65 .75 .47 .98142HVY 99,000 18,000 3.74 1.97 2.44 1.14 .63 .98260STD 150,000 27,270 14.0 2.95 2.76 1.18 79 1.26

Custom AttachmentsAvailable

* Replaces ESCO XHC Series Chain

AVERAGECHAIN WORKING ULTIMATE

NO. PITCH LOAD STRENGTH A B C D E F H JK T X Y Z

AS132XHD 6.050 23,535 220,000 3.00 1.00 5.50 1.12 6.50 2.00 1.75 6.91 .63 4.62 2.00 3.00

AS157XHD 6.050 28,000 250,000 3.00 1.00 5.50 1.19 6.75 2.50 7.75 6.91 .63 4.62 2.25 3.50

AS159XHD 6.125 35,400 290,000 3.25 1.00 5.25 1.25 6.75 3.00 2.00 8.16 .75 5.56 2.50 4.00

AS257XHD 6.050 37,851 310,000 3.00 1.00 5.50 1.50 7.25 3.50 2.12 6.91 .63 4.62 2.75 4.50

*

• J Hooks• Diverter Arms• Pusher Lugs

• Roller Lugs• Wheels• Slider Blocks

• Chain Guides• Specials as Needed

Debarker Infeed Chain

Forged Steel Conveyor Chain

UHMW & Polyurethane Products


unikingcanada.com

Cast Alloy SteelH&C Class MillChains

Metallurgy

Note: Maximum working load is based on a safety factor of six.

PinLinkis typically cast in 8630 alloy steel and through-hardened to BHN 350/380.This material demonstrates an optimum combination of high ultimatestrength and resistance to shock loading.

Typically we use 4140 fully through-hardened alloy steel bar with aBHN range of 360/400. This alloy and heat treatment are designed togive high strength and impact resistance.

“C” Class Chain “H” Class Chain Drag Chain


unikingcanada.com

Long Link Chain

Connecting Links

l'ANCO Products can help keep you competitive in a demanding marketplace. As the pioneer of the squared pro�le for long link chain, I'ANCO recommends this style of chain for your log haul and waste conveyor requirements.

Available in both Austenitic Manganese and Alloy 2A (a controlled balanced selection of strength enhancing elements), l'ANCO can provide a solution to yourconveying needs.

I'ANCO Products o�ers two styles of connecting links for your cast square long link. Depending on the material of your original chain, I'ANCO can provide a #4 Alloy Weld In Style link or a #5 Manganese Lap Style link.

#4 Alloy Weld in Style #5 Menganese Lap Style


unikingcanada.com

Series 300 Integral Fixed Loop Flight

When reliability counts, I'ANCO Series 300 integral �ights are the number one choice for pulpwood applications. The rugged box design include one pitch of our square pro�le chain with the �ight and is joined with #5 lap links at the factory and #4 weld-in style for �eld repairs.

I'ANCO Products builds our cast chains with integral �ights to suit your speci�c requirements. The �ights are spaced accordingly to minimize wear and maximize throughput. The symmetrical design of the heavy-duty �ights allows for the chain to drag material on either the carry or return runs, or to be �ipped extending the life of the chain. The box design with the internal gussets provides the best combination of lightweight and high strength. I'ANCO builds in thicker wear surfaces so the components last longer.

I'ANCO Series 300 �ights are o�ered in either cast manganese or Alloy 2A steel depending on your conveyor's speci�c requirements. The manganese �ights work hardens in the correct applications and develops a tough hardened surface that will resist wear. In dry, gritty applications with negligible impact, I'ANCO recommends our cast Alloy 2A. The Alloy 2A �ights are heat-treated providing a through-hardened product to ensure long life without compromise.

Series 300 Integral FIxed Loop Flight

I'ANCO cast Series 300 �ights are available from 4" to 6" high depending on the size of the chain and up to width of 48".


unikingcanada.com

Series 400 Alloy Dual Tang Flight

I'ANCO's cast alloy Series 400 dual tang �ights are manufactured from a carefully selected combination of alloys which, in the heat treated condition has proven itself as a tough, long wearing product that can be easily welded. The superior grade of steel is selected because of its added strength and durability, enabling movement of a higher volume of product for longer periods of time.

I'ANCO's Series 400 �ights are supplied as two identical pieces per �ight. To assemble, use a vertical link with the vertical face of the �ight facing the running direction of the chain. Slide the two tangs together until the body rests against the link on both sides. Clamp in position and tack each end, both sides; also tack the tangs to the ribs on the outer edge. When tacking is completed, �nish with two passes on the chain and one pass on the tang.

With widths ranging from 12" to 48'' and heights from 4'" to 6'', I'ANCO cast Series 400 �ights o�ers �exibility to suit your needs. The abrasion resistant dual tang �ights provides the best economical solution without compromising integrity and reliability.

Installation

Series 400 Alloy Dual Tang Flight


unikingcanada.com

Barker Products in Cast Alloy & Manganese Steels

Barker Feed Works

Standard and Custom Feed ChainsI’ANCO Products has been a leading producer of barker feed chains for over 25 years. I’ANCO has worked closely with several de-barker manufacturers to develop feed chains that will handle the severe service associated with these conveyors. Through this development process, austenitic Manganese Steel has proven to be the best material for the cast links, outperforming alloy steel in most applications. The Manganese Steel produces a work hardened surface in the range of 500 BHN while maintaining a tough ductile core with an elongation of 30-40%. In comparison, alloy steels will always lose toughness, ductility and elongation as the hardness is increased resulting in possible failure due to impact or shock loading. I'ANCO Products builds our cast chains with integral �ights to suit your speci�c requirements. The �ights are spaced accordingly to minimize wear and maximize throughput. The symmetrical design of the heavy-duty �ights allows for the chain to drag material on either the carry or return runs, or to be �ipped extending the life of the chain. The box design with the internal gussets provides the best combination of lightweight and high strength. I'ANCO builds in thicker wear surfaces so the components last longer.

To help get the surface of the Manganese up to hardness, the links are �rst rumbled so the outer surfaces will be hardened, and the barrel and leg holes are ball broached to create the hard skin on the interior surfaces of the link. To ensure the smoothest possible operation of the chain, all contact areas between the links are precision ground so all mating surfaces are parallel.

The pins used in I’ANCO barker feed chains are produced from 4140 through hardened steel with a typical hardness of 380 BHN. The pins are then machined to provide a consistent and tight tolerance of .025" between the pin and barrel. The pins use either a ‘D’ or ‘T’ head con�guration to lock in place.

I’ANCO is continually improving its products to ensure that its customers are provided with the best conveying equipment available.

*I’ANCO supplies complete sprocket assemblies for all of the above listed chains as well as wear bars where applicable.


unikingcanada.com

Precision Cast Sharp Chain

Cast Sharp Chain – excellent where high speed, tight tolerances, and a long service life are required.

I’ANCO Products Ltd. has developed our Precision Cast Sharp Chain to address the needs of the high-tech saw mill. We have designed our chain with the rigors and challenges of primary log breakdown in mind. It is manufactured from high quality low alloy steel components through hardened to produce the best combination of wearability and toughness. All components are fully machined to extremely tight tolerances to produce a chain with minimal lateral and vertical deviation allowing maximum optimization of your saw logs. This chain is typically guided within .010" to allow the bands to run tight to the chain and minimize lateral deviation and eliminate wastage in the planer.

At I’ANCO we engineer our chain to order to ensure it meets your needs. We readily adapt our chain to match the needs of your unique application. We currently produce this chain in the quenched and tempered, case hardened and nitrated conditions, based on the application’s requirements. We also can adjust the height and slope of the tips to minimize the penetration into the log.

I’ANCO’s wear plate for our sharp chain is designed to maximize the bearing surfaces between the chain and the wear plate. All surfaces are designed to run in contact to minimize pressure and maximize the bearing surfaces. The Base plates are made from 400 BHN wear plate and the center guide can also be purchased in a hardenedvariation to maximize wearability.

Alloy Steel Chain EXCELLENT FOR HIGH-ABRASION,HIGH-SPEED & HIGH-LOAD APPLICATIONS

Barker Feed Works

I’ANCO manufactures our sharp chainsprockets with a fully machined huband running area for the chain to minimize lateral run out. The teeth are burnedon a precision burning table and �t tothe chain to ensure maximum tooth contact and a smooth interface. We thenpost heat treat the sprockets to minimizethe heat-a�ected zone from the burn.This produces a sprocket with an excellent longevity.


unikingcanada.com

Scanner Chains

I’ANCO manufactures its scanner chains to the highest standards. Our sidebars are produced typically from Chrome Molly steel through hardened to 360BHN. We use through hardened pins and thimbles made from low alloy steel that are quenched and tempered to the desired hardness. The rollers are made from carbon steel and are case hardened to produce maximum longevity. We use punched and shaved sidebars to produce maximum bearing surfaces. Our thimbles and pins utilize milled �ats to lock the pins and interference �ts to guarantee superior life. All of these speci�cations give you a chain that is unsurpassed on the market and able to run over 500 feet per minute. All components are inspected to ensure you get a chain free from defects and ready to excel in your application.

I’ANCO’s log cradles are investment cast to ensure dimensional accuracy and stability. We cast the cradles from low alloy steel and through harden them to a typical 400BHN to ensure you get maximum life from your chain. We manufacture our log cradles to run with a “V” guide system to ensure the logs do not move during or after scanning. With I’ANCO’s wear plate we go to great e�orts to ensure linear alignment. We also drill and tap our wear plate to work with your lubrication system.

Log Cradles

Steel Bushed Roller Chain

Cast Mill Chain in High-Speed Applications

I’ANCO Products cast alloy steel mill chain is successfully used in many high-speed applications. We currently have applications where we produce excellent longevity at speeds up to 400 feet per minute. We achieve outstanding service life by maximizing our bearing surfaces between the sidebars, wear plate, pin and barrel. We also use machined pins and lubricated barrels to increase the longevity of our chain. We use press �ts between the sidebars and the pins to ensure the pins do not turn, allowing wear on only one side of the pin. I’ANCO’s sidebars in our mill chain have over 50% more bearing surface than most other chains. All these features, in turn with our use of tough low alloy steels at nearly 400 BHN, produce a chain with unmatched wear characteristics. For more information about our cast mill chains, please refer to our Cast H&C Class Chain brochure, or ask an I’ANCO chain representative.


unikingcanada.com

Sharp Top Chain

Standard and Custom Feed Chains

1/ The teeth are machined to a uniform pro�le to provide a better grip with more accuracy and less penetration;

2/ The bottom of the chain is machined �at to increase the load bearing surface, resulting in less wear and grooving on chain beds;

3/ The centre plates in multi-strand chains are solid. This will reduce the failure rate due to sawdust and chips packing between plates;

4/ Special alloy steel and heat treating methods provide a material that is designed to withstand the rigours faced in these applications;

5/ The pins are hardened to reduce wear promoting longer life.

THE CHAIN

Sharp Top Chains

Sharp Top chain is becoming widely used throughout the lumber processing industry. The applications this chain is used in are very severe. Speeds that range from 300 to 1,300 feet per minute combined with the debris present in these applications require a chain system that is designed to handle it. I’ANCO’s Sharp Top Chain system is designed and manufactured to provide top performance in the worst applications.

Note: Other sizes available. Please call for our complete selection.


unikingcanada.com


Sharp Top Chains supplied by Uniking have hard chromed pins.

• Reduces corrosion• Reduces elongation• Increased chain life

80-2ST5PEP High Speed Edger and Gang Sharp Top Chain

• Speeds up to and over 1400 F/min.• Precision Ground Teeth and chain bottoms• Available in Flatted Tooth to further reduce marking of certain species

6

Sharp Top Chains

unikingcanada.com

Sharp Top Chains

unikingcanada.com


SUMMIT®

SHARP TOP CHAINSTM

VIKING®

SHARP TOP CHAINSTM

PSHAR CHAIN

INNOVATION

The endless push to raise sawmill productivity constantly demandshigher speed, greater accuracy and less waste. SUMMIT® Sharp TopChainsTM/VIKING® Sharp Top ChainsTM can play a role in your mill’sprofitability by performing better and lasting longer.

We start with superior design. We determine the exact degreeof tip sharpness to work best for each application, creatingmaximum grip with minimum penetration and tear out. The resultis a chain that runs accurately at speeds over 1,400 FPM.

Superior design demands superior material and fabrication.SUMMIT® Sharp Top ChainsTM/VIKING® Sharp Top ChainsTM productsare made of top grade material to provide the greater hardnessnecessary to resist corrosion and oxidation while maintaningstrength at high temperatures. SUMMIT® Sharp Top ChainsTM/VIKING® Sharp Top ChainsTM offers precision ground flat bottomchains that reduce wear and dammage to your chain bed anddistributes load evenly. Our chains are fine blanked with lowdraft tooth profile that distributes weight and reduces lossesfrom bruising. We manufacture SUMMIT® Sharp Top ChainsTM/VIKING® Sharp Top ChainsTM with the closest possible tolerancesin the industry and offer a unique solid center plate design that allbut eliminates breakage from sawdust packing.

7

Applications Photos

unikingcanada.com


8

Applications Photos

unikingcanada.com


[email protected] : 514-886-5270Fax : 450-430-1950

Tel: 780-242-0864Calgary

Tel: 431-334-8334Winnipeg

Tel: 514-886-5270Montreal

Tel: 416-526-0352Toronto

Documents

FOREST PRODUCTS INDUSTRY · WD116 8.000 55,000 9,200 15 14.5 15.38 14.12 .75 .38 12.75 1.75 ... CHAIN SPROCKET WIDTH OF WIDTH OF OF CENTER LINE LINE OF OF NO. PITCH FACE COTTERED