Embed Size (px)
Citation preview
2016-2018 Ford Vehicles equipped with MyFord Touch SYNC3 System
Navigation Upgrade. S1C067A-Y01E
Installation and User Manual
DisclaimerPlease read this manual thoroughly
prior to installation. This manual shows a typical installation of a
S1C067A-Y01E Your vehicle may vary.
Be sure ACC power is off before removing the head unit. Use caution and if unsure, seek professional assistance.
***Professional installation is strongly recommended***
Tech support available Mon - Fri, 9am-5pm (PST)
909-375-0633
Cover all surfaces with tape or plastic film to protect against scratching and damage to interior dash panels. Linkswell Automotive is in no way responsible for any damage
incurred during the installation.
Notice: This product has been verified in vehicles listed on the application guide only.
Ford offers different software for their vehicles. Please confirm your vehicles compatibility.
Installation 1
Switching to the Interface 3
Interface Home Page 4
Interface Settings
GPS Settings 6
System Settings 7
Vehicle Settings 8
Interface System Info. 9
OBI Information 10
HDMI Input 11
AUX Input 12
Video Input 13
Music Input 14
Navigation 15
More 16
Table Of Contents
Factory Radio
Rear Camera
USB
1
Interface
Installation Diagram
Navigation Map SD
S1C067A-Y01E
SYNC Module
GPS Antenna
Interface CAN Box
HDMI Input
T- Harnesses
2
Installation Parts
1 GPS Antenna 5 HDMI Cable
2 LVDS Cables 6 Interface CAN Box
3 T-Harness 7 Rear Camera Input
4 Interface Module 8 USB Input
1 2 3
4
5
6
7
8
3
Switching to the Interface
Switching between the OEM system and your newly installed interface is easily done by using the factory touch screen.
**The icons on your screen may vary depending on the year and model of your vehicle.** This will not effect the control of your new system.
Pressing the Apps Icon on the bottom of the factory display will access the interfaces features
4
Interface Homepage
Your interface menu home page will look similar to this, having icons matching the style of your factory system.
From the interface homepage, you will be able to navigate through the interfaces features by pressing the on-screen icons.
To access the interfaces features, simply press the onscreen icons.
**The icons on your screen may vary depending on the year and model of your vehicle.** This will not effect the control of your new system.
5
Interface Settings
The interface’s “System Settings” page is to make changes to the interface’s settings only. To make changes in the entertainment system or to change vehicle settings,
use the settings menu in the factory radio menu. Instructions for those can be found in your factory vehicles owners manual.
Once you press the settings icon, you now have four options in making changes to how your interface will work
Using the touch screen you can now navigate through all the options available with your newly installed interface.
**The icons on your screen may vary depending on the year and model of your vehicle.** This will not effect the control of your new system.
6
Interface GPS Settings
The interfaces GPS Settings allows you to do the following:
Map Update: Used only when updating navigations mapping.
GPS Voice: Turns on and off the Voice Prompts.
GPS Voice Mix: When turned on navigation sounds will come from only the drivers front speaker. Off makes the sound come from all speakers.
GPS Volume: Adjust the Navigations Volume level.
**The icons on your screen may vary depending on the year and model of your vehicle.** This will not effect the control of your new system.
7
Interface System Settings
The interfaces System Settings allows you to do the following:
System Update: Used to update the firmware on the interface.
System Rest: Will restart the Interface.
**The icons on your screen may vary depending on the year and model of your vehicle.** This will not effect the control of your new system.
8
Interface Vehicle Settings
The Vehicle Settings allows you to do the following:
Rear Camera Settings: Turns the rear camera input on or off.
Rear Camera Option: Chose between OEM and Aftermarket rear camera input.
Car Model: Select your vehicle so the interface can function correctly.
**The icons on your screen may vary depending on the year and model of your vehicle.** This will not effect the control of your new system.
9
Interface System Info.
The interfaces System Info will tell you the following:
Version: The interfaces version.
Barcode: Your interfaces serial Number.
MPEG: The firmware version your interface is currently running.
**The icons on your screen may vary depending on the year and model of your vehicle.** This will not effect the control of your new system.
10
Interface OBD Info.
The interfaces OBD Info provides you with the following vehicle information:
Transmission Gear
Outside Temp
Vehicle Speed
Engine RPM
**Available information will vary by vehicle**
**The icons on your screen may vary depending on the year and model of your vehicle.** This will not effect the control of your new system.
11
Interface HDMIYour interface now offers you an HDMI input that you can use to view your
compatible* smart phone’s screen or any other device with an HDMI output on your your factory entertainment systems display. This input DOES NOT offer control of the
connected device, only the mirroring of the video and audio are accessible.
FMVSS and local laws do not allow the viewing of video by a driver or in a position the driver may view while the vehicle is in motion. Therefore we recommend that
this function is used only for view applications such as navigation from your phone while driving. Driver safety is always a first priority.
NOTE: You're phone or other device may require a special adaptor to view HDMI.
Contact your Phone dealer for more info. 1080P, 720P, and 480P are supported
Video: Once your device is connected, touch the video button to start viewing. To exit the video
page, touch the screen to reveal the return icon, or press BACK or HOME on the factory radio controls
**The icons on your screen may vary depending on the year and model of your vehicle.** This will not effect the control of your new system.
12
Aux Input
**The icons on your screen may vary depending on the year and model of your vehicle.** This will not effect the control of your new system.
The interfaces provides you with an Aux Input:
To use this input. Connect a video source to the Aux video/audio input on the interface.
Once connected, press the Display icon on your touch screen display.
Your video will show on your factory display, and the audio will play through the vehicles audio system.
13
Interfaces Video Input
**The icons on your screen may vary depending on the year and model of your vehicle.** This will not effect the control of your new system.
The interfaces provides you with a new Video Souce:
To use your Video source: Download your movies or video onto a USB stick.
Plug the USB Stick into the interfaces supplied USB input.
Selecting Playlist will access the USB Files.
Select the video you want to watch and the interface will automatically start playing your video.
14
Interfaces Music Source
**The icons on your screen may vary depending on the year and model of your vehicle.** This will not effect the control of your new system.
The interfaces provides you with a new Music Source:
To use your Music source: Download your MP3 Music files onto a USB stick.
Plug the USB Stick into the interfaces supplied USB input.
Selecting Playlist will access the USB Files.
Select the Song/Album you want to listen to and the interface will automatically start playing your music.
15
Interfaces NavigationYour interface comes with the most recent version
of IGO’s NextGen Navigation software. For navigation user instructions go to www.igonavigation.com
Your first time using your new navigation you will have to set up the path for the files:
To do this you will select the Nav Icon on the interface Home Page. From this screen select Browse.
Open the NaviOne folder and look for NaviOne.exe file.
Once you have selected this file it will bring you back to this page
Make sure you have Auto Run checked.
Then select Run GPS
**The icons on your screen may vary depending on the year and model of your vehicle.** This will not effect the control of your new system.
16
More Icon
The interface moves the factory SYNC Icon into the More Icon.
Pressing the More Icon will take you to the factory SYNC Apps page. Allowing you to connect a Bluetooth device.
or Find more Mobile Apps.
To get back to the interfaces feature press the Apps icon. or
press the HOME button to get back to the Factory's Home page.
**The icons on your screen may vary depending on the year and model of your vehicle.** This will not effect the control of your new system.
909-375-0633
www.linkswellinc.com
LinksWell Inc on Facebook, Twitter, and Youtube
