Model Drive hp Range

RS500 pft PTO 25hp to 30hp

RS600 pft PTO 25hp to 30hp

RS610 ic PTO 30hp to 65hp

RS710 ic PTO 35hp to 75hp

RS810 pt PTO 50hp to 100hp

RS910pt PTO 50hp to 100hp

RS810 iq Hydraulic 80hp to 150hp

RS910 iq Hydraulic 80hp to 150hp

RS1000 iq Hydraulic 80hp to 150hp

RS1000 ip Hydraulic 150hp to 200hp Plus

RS1200 ip Hydraulic 150hp to 200hp Plus

Snow Processor / Groomer / Maintainer

For More Information Call 715.623.6300 And Ask For Product Support

Now you have a year around trail groomer. Not only is it a snowmobile trail groomer it’s a

sno processor. Simple as removing the gauge wheels and blade and installing the snow

compression pan.

Introducing the NEW NORTEC Snowmobile Trail Groomer/Snow Processor. Bringing technology to the snowmobile trail

grooming industry. The NORTEC Snow Processor not only grooms the trail, it processes the snow. Controlling

and processing the snow is the key to trail maintenance. Corner ridging and snow push-out a problem? Cut dangerous

corner ridging down, work the snow back onto the trail. Icing a problem? The trail cutter tooth can

cut and grind those problem areas.

Don't Drag it, Lift it. Ever wish you could just lift and go? Thanks

to NORNORNORNORTECTECTECTEC's Exclusive lift and go system, your wish has

come true. Need more traction? The Sno Processor lift and go

system helps with traction control. Just transfer the weight of

the snow processor to the power unit drive wheels!

NORNORNORNORTEC TEC TEC TEC Exclusive Air Dejection System To solidify the snow you need to remove the air, leaving processed snow

that you can build a good trail with. It all starts with the snow.

Choose the rotor that’s right for you. NORTEC NORTEC NORTEC NORTEC offers two rotors to meet your needs and trail conditions.

Snow Processor

The milling rotor is less aggressive and easy to operate. This snow

base saving rotor is gentle on the trail snow/ice base, and also very

operator friendly. The processing rotor is very aggressive! This

berm cutting rotor will cut and grind hard pack snow and ice.

Choosing or changing rotors for the conditions is a key step in

proper trail grooming worn out snow with fresh vibrant snow

makes the ultimate snow trail/road.

Pictured With Optional

Nortec Nordic Track Setter

RS910iq

RS1000ip

*Snow Milling

*Snow Collection

*Snow Processing

*Snow Molecular Processing

*Snow Base Building

*Compression Pan

*Vibration

The NORNORNORNORTEC TEC TEC TEC Difference! Performance Through Design

Pre-Season Trail Maintenance

It all starts with pre-season trail maintenance. If bumps, moguls, rocks and debris are

there at the beginning of the season, it will only worsen as the season goes on. Filling in

that low spot with snow just doesn't work! Cutting the bumps/moguls out does. Open

up your trails ahead of schedule. Have a problem with farm fields and open areas?

Here's your answer - grind and pulverize those dirt clumps. Lay down a smooth and

processed trail base.

Testing has shown hot spots are the biggest

enemy of the trail. What's a hot spot? A hot

spot is when the sun warms up a dark object

like dirt, gravel, rocks, wood etc. The dark

object heats up and burns a hole in the trail.

It's like a cancer, there's no stopping

it. In just a day or so, its all over - shut the

trail down. Using the Sno Processor will

slow down this process.

Start with millingmillingmillingmilling the surface, cutting the humps, bumps and moguls.

CollectingCollectingCollectingCollecting the milled snow along with new snow. Process Process Process Process the worn out

milled snow, mixing/processing it in with new snow. Processing the snow

through the snow processor removes the air and changes the snow snow snow snow

moleculesmoleculesmoleculesmolecules . Lay down the processed milled snow behind the rotor to build

a smooth snow base. Build your snow base in layers. This is referred to as

lamination, creating a strong, durable snow basesnow basesnow basesnow base . Compress the snow with

the adjustable compression pancompression pancompression pancompression pan with variable snow intake. Using the

weight transfer system, taking weight from the power unit and transferring

the weight to the compression pan with up to 10,000 lbs of compression

weight. Now the snow has only one place to go - out the back of the

compression pan. Finish off the process by vibratingvibratingvibratingvibrating the snow onto the

trail surface.

715-623-6300 715-623-6340 FAX

W9112 Cherry Road Antigo, WI 54409

Email: sales.nortec@goantigo.com

Your Authorized NORTEC Dealer

It’s a fact, vibration has been used in the construction

industry for years. Vibrating the material into the surface really

works. In snow processing, this is the final process in proper

trail grooming. This is also one more step in achieving faster

snow setup time.

NORTEC reserves the right to change design or specifications without notice. Information contained herein is general in nature and is not intended for

specific application purposes. Photographs contained herein may be displayed with safety and/or guards removed to show mechanical functions.

Literature # DC90418 Effictive: 1/02/2009 Snow Force (North American Version) Litho in USA