Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
Designed for corrosive appliances and exhaust systems.
Easiest installation on the market...featuringSureLock™ B-Vent Locking System.
For use with masonry �replaces which,burn wood, oil, coal or gas.
Premium quality, for use with gas-�red appliances.
®
Designed for use with pellet, cornor wheat-�red appliances.
A quality, complete line including2x2 di�users and extruded aluminum.
Designed for use with pellet, cornor wheat-�red appliances.
Stainless steel and aluminum liner kits, connectors, and accessories.
Full line of �re & ceiling radiation dampers. Capacity to �ll high volume orders 100%.
Litho in U.S.A. ©2021 Metal-Fab Inc. Form No. L898-04/2210248
CATHEDRAL SUPPORT
TEMP/GUARD INTERIOR - NO OFFSET
TEMP/GUARD EXTERIOR
TEMP/GUARD PITCHED CEILING TEMP/GUARD HIGH - PITCHED CATHEDRAL CEILING
TEMP/GUARD MASONRY CHIMNEY EXTENSION
CATHEDRAL SUPPORT
TEMP/GUARD INTERIOR - NO OFFSET
TEMP/GUARD EXTERIOR
TEMP/GUARD PITCHED CEILING TEMP/GUARD HIGH - PITCHED CATHEDRAL CEILING
TEMP/GUARD MASONRY CHIMNEY EXTENSION
6.00ʺ
9.00ʺ
7.00ʺ
10.00ʺ
8.00ʺ
11.00ʺ
10.00ʺ
13.00ʺ
12.00ʺ
15.00ʺ
6ʺ 7ʺ 8ʺ 10ʺ 12ʺ
6, 12, 18, 24, 36, and 48* inch lengths
SIZE
A
B
C
SIZE
A
B
C
14ʺ 16ʺ
16.00ʺ 18.00ʺ
18ʺ
(2) Quick Connect Lock using sheet metal screws.
17.00ʺ 19.00ʺ 21.00ʺ
12, 18, 36, & 48 inch lengths
Notes:(1) 14ʺ, 16ʺ, 18ʺ listed to 1700˚F intermittent;
1000˚F continuous.
14.00ʺ
SIZE
A
B
C
D
E
6ʺ 7ʺ 8ʺ 10ʺ 12ʺ
6.00ʺ
9.00ʺ
7.00ʺ
10.00ʺ
8.00ʺ
11.00ʺ
10.00ʺ
13.00ʺ
12.00ʺ
15.00ʺ
9.50ʺ
17.50ʺ 18.50ʺ 19.50ʺ 21.50ʺ 23.50ʺ
10.00ʺ 10.50ʺ 11.50ʺ 12.50ʺ
A
B
C
D5.00
2.002.75
A
B
CAB
15°
D
C
14ʺ 16ʺ 18ʺSIZE
A
B
C
D
14.00ʺ
17.00ʺ
16.00ʺ
19.00ʺ
18.00ʺ
21.00ʺ
6.40ʺ
5.13ʺ
6.13ʺ
5.25ʺ
6.25ʺ
5.40ʺ
6ʺ 7ʺ 8ʺ 10ʺ 12ʺSIZE
A
B
C
D
6.00ʺ
9.00ʺ
7.00ʺ
10.00ʺ
8.00ʺ
11.00ʺ
10.00ʺ
13.00ʺ
12.00ʺ
15.00ʺ
3.75ʺ
6.40ʺ
3.75ʺ
6.40ʺ
3.75ʺ
6.40ʺ
3.75ʺ
6.40ʺ
3.75ʺ
6.40ʺ
A
C
B
D
CAB
Note: Insulated Tee - 10" - 12" galvanized casing only. 14", 16", and 18" components are intended for use on chimney extensions only.
NOTE: See installation instructions for offset chart.
15° angles in 10" & 12" available with galvanized casing only.
NOTE: See installation instructions for offset chart.
Temp/Guard® All-Fuel Chimneys
CHIMNEY PIPE - 6" - 12" TGS (Stainless Casing) and TGG (Galvanized Casing)
CHIMNEY PIPE - 14" - 18" TG (Aluminized Outer Casing)
INSULATED TEE - 6" - 12" TGST (Stainless Casing) and TGGT (Galvanized Casing)
TEE CAP - 6" - 12" TGTC INSULATED TEE CAP - 6" - 8" TGITC
15° ANGLE - 6" - 12" TGSA15 (Stainless Casing) and TGGA15 (Galvanized Casing)
15° ANGLE - 14" - 18" TGA15 (Aluminized Outer Casing)
6.00ʺ
9.00ʺ
7.00ʺ
10.00ʺ
8.00ʺ
11.00ʺ
10.00ʺ
13.00ʺ
12.00ʺ
15.00ʺ
6ʺ 7ʺ 8ʺ 10ʺ 12ʺ
6, 12, 18, 24, 36, and 48* inch lengths
SIZE
A
B
C
SIZE
A
B
C
14ʺ 16ʺ
16.00ʺ 18.00ʺ
18ʺ
(2) Quick Connect Lock using sheet metal screws.
17.00ʺ 19.00ʺ 21.00ʺ
12, 18, 36, & 48 inch lengths
Notes:(1) 14ʺ, 16ʺ, 18ʺ listed to 1700˚F intermittent;
1000˚F continuous.
14.00ʺ
SIZE
A
B
C
D
E
6ʺ 7ʺ 8ʺ 10ʺ 12ʺ
6.00ʺ
9.00ʺ
7.00ʺ
10.00ʺ
8.00ʺ
11.00ʺ
10.00ʺ
13.00ʺ
12.00ʺ
15.00ʺ
9.50ʺ
17.50ʺ 18.50ʺ 19.50ʺ 21.50ʺ 23.50ʺ
10.00ʺ 10.50ʺ 11.50ʺ 12.50ʺ
A
B
C
D5.00
2.002.75
A
B
CAB
15°
D
C
14ʺ 16ʺ 18ʺSIZE
A
B
C
D
14.00ʺ
17.00ʺ
16.00ʺ
19.00ʺ
18.00ʺ
21.00ʺ
6.40ʺ
5.13ʺ
6.13ʺ
5.25ʺ
6.25ʺ
5.40ʺ
6ʺ 7ʺ 8ʺ 10ʺ 12ʺSIZE
A
B
C
D
6.00ʺ
9.00ʺ
7.00ʺ
10.00ʺ
8.00ʺ
11.00ʺ
10.00ʺ
13.00ʺ
12.00ʺ
15.00ʺ
3.75ʺ
6.40ʺ
3.75ʺ
6.40ʺ
3.75ʺ
6.40ʺ
3.75ʺ
6.40ʺ
3.75ʺ
6.40ʺ
A
C
B
D
CAB
Note: Insulated Tee - 10" - 12" galvanized casing only. 14", 16", and 18" components are intended for use on chimney extensions only.
NOTE: See installation instructions for offset chart.
15° angles in 10" & 12" available with galvanized casing only.
NOTE: See installation instructions for offset chart.
Temp/Guard® All-Fuel Chimneys
CHIMNEY PIPE - 6" - 12" TGS (Stainless Casing) and TGG (Galvanized Casing)
CHIMNEY PIPE - 14" - 18" TG (Aluminized Outer Casing)
INSULATED TEE - 6" - 12" TGST (Stainless Casing) and TGGT (Galvanized Casing)
TEE CAP - 6" - 12" TGTC INSULATED TEE CAP - 6" - 8" TGITC
15° ANGLE - 6" - 12" TGSA15 (Stainless Casing) and TGGA15 (Galvanized Casing)
15° ANGLE - 14" - 18" TGA15 (Aluminized Outer Casing)
12.44ʺ
SIZE
A
B
6ʺ 7ʺ 8ʺ 10ʺ 12ʺ
12.63ʺ 13.63ʺ 14.63ʺ 17.19ʺ 19.19ʺ
15.63ʺ 16.63ʺ 17.63ʺ 20.19ʺ 22.19ʺ
SIZE 6ʺ 7ʺ 8ʺ 10ʺ 12ʺ
9.00ʺ 10.00ʺ 11.00ʺ
5.00ʺ-11.00ʺ
SIZE 6ʺ 7ʺ 8ʺ
19.50ʺ 19.50ʺ 19.50ʺ
5.00ʺ-11.50ʺ 5.00ʺ-13.50ʺ
B
A
1.50A
C
BSQUARE
6.00ʺ 7.00ʺ 8.00ʺ 10.00ʺ 12.00ʺ
12.00ʺ 13.00ʺ 16.00ʺ 18.00ʺ
SIZE
A
B
6ʺ 7ʺ 12ʺ
4.75ʺC
8ʺ 10ʺ
14.00ʺ
4.75ʺ 4.75ʺ 3.75ʺ 3.75ʺ
AB
30°
D
C
7ʺ 8ʺ 10ʺ 12ʺSIZE
A
B
C
D
6.00ʺ
9.00ʺ
7.00ʺ
10.00ʺ
8.00ʺ
11.00ʺ
10.00ʺ
13.00ʺ
12.00ʺ
15.00ʺ
4.75ʺ
6.75ʺ
4.75ʺ
6.75ʺ 6.75ʺ
4.75ʺ 4.75ʺ
6.75ʺ 6.75ʺ
B
6.003.00
AC
AB
14.44
5.94
A
6.00ʺ 8.00ʺ
SIZE
A
6ʺ 8ʺ
D
C AB
Note: Available in stainless steel, please contact factory.
30° ANGLE - 6" - 12" TGSA30 (Stainless Casing) and TGGA30 (Galvanized Casing)
30° ANGLE - 14" - 18" TGA30 (Aluminized Outer Casing)
PAINTED CEILING SUPPORT - TGCSP
PAINTED CEILING SUPPORT TRIM - TGCST
DELUXE CEILING SUPPORT - 6" and 8" TGDLXS
C
AB
WALL SUPPORT/ADAPTER - ADJUSTABLE - TGAWS
WALL SUPPORT/ADAPTER - FIXED - TGAWS
ANCHOR PLATE - 6" - 12" TGAP
For use on open beamed pitched roofs or ceilings.Includes trim pieces for finishing out installation.Also includes integral single/double wall adapter.Will support 20 ft. of pipe.
B
A
29.00
CATHEDRAL SUPPORT W/TRIM - 6" - 12" TGRS
6"
4.75"
6.00" 7.00"
13.44"
8.00"
14.44"
10.00"
17.00"
12.00"
19.00"
SIZE
A
B
C
A
B
C
6"
9.00"
6.50"
16.50"
10.00"
7.00"
16.50"
11.00"
7.50"
16.50"
13.00"
8.50"
20.50"
15.00"
9.50"
20.50"
7" 8" 10" 12"
14ʺ 16ʺ 18ʺSIZE
A
B
C
D
14.00ʺ
17.00ʺ
16.00ʺ
19.00ʺ
18.00ʺ
21.00ʺ
7.81ʺ
6.25ʺ
7.25ʺ
6.50ʺ
7.50ʺ
6.81ʺ
A
B
SIZE 6ʺ 7ʺ 8ʺ 10ʺ 12ʺ
6.00"
12.44"
7.00"
13.44"
8.00"
14.44"
10.00"
17.00"
12.00"
19.00"
A
B
2"- 6"
12.44ʺ
SIZE
A
B
6ʺ 7ʺ 8ʺ 10ʺ 12ʺ
12.63ʺ 13.63ʺ 14.63ʺ 17.19ʺ 19.19ʺ
15.63ʺ 16.63ʺ 17.63ʺ 20.19ʺ 22.19ʺ
SIZE 6ʺ 7ʺ 8ʺ 10ʺ 12ʺ
9.00ʺ 10.00ʺ 11.00ʺ
5.00ʺ-11.00ʺ
SIZE 6ʺ 7ʺ 8ʺ
19.50ʺ 19.50ʺ 19.50ʺ
5.00ʺ-11.50ʺ 5.00ʺ-13.50ʺ
B
A
1.50A
C
BSQUARE
6.00ʺ 7.00ʺ 8.00ʺ 10.00ʺ 12.00ʺ
12.00ʺ 13.00ʺ 16.00ʺ 18.00ʺ
SIZE
A
B
6ʺ 7ʺ 12ʺ
4.75ʺC
8ʺ 10ʺ
14.00ʺ
4.75ʺ 4.75ʺ 3.75ʺ 3.75ʺ
AB
30°
D
C
7ʺ 8ʺ 10ʺ 12ʺSIZE
A
B
C
D
6.00ʺ
9.00ʺ
7.00ʺ
10.00ʺ
8.00ʺ
11.00ʺ
10.00ʺ
13.00ʺ
12.00ʺ
15.00ʺ
4.75ʺ
6.75ʺ
4.75ʺ
6.75ʺ 6.75ʺ
4.75ʺ 4.75ʺ
6.75ʺ 6.75ʺ
B
6.003.00
AC
AB
14.44
5.94
A
6.00ʺ 8.00ʺ
SIZE
A
6ʺ 8ʺ
D
C AB
Note: Available in stainless steel, please contact factory.
30° ANGLE - 6" - 12" TGSA30 (Stainless Casing) and TGGA30 (Galvanized Casing)
30° ANGLE - 14" - 18" TGA30 (Aluminized Outer Casing)
PAINTED CEILING SUPPORT - TGCSP
PAINTED CEILING SUPPORT TRIM - TGCST
DELUXE CEILING SUPPORT - 6" and 8" TGDLXS
C
AB
WALL SUPPORT/ADAPTER - ADJUSTABLE - TGAWS
WALL SUPPORT/ADAPTER - FIXED - TGAWS
ANCHOR PLATE - 6" - 12" TGAP
For use on open beamed pitched roofs or ceilings.Includes trim pieces for finishing out installation.Also includes integral single/double wall adapter.Will support 20 ft. of pipe.
B
A
29.00
CATHEDRAL SUPPORT W/TRIM - 6" - 12" TGRS
6"
4.75"
6.00" 7.00"
13.44"
8.00"
14.44"
10.00"
17.00"
12.00"
19.00"
SIZE
A
B
C
A
B
C
6"
9.00"
6.50"
16.50"
10.00"
7.00"
16.50"
11.00"
7.50"
16.50"
13.00"
8.50"
20.50"
15.00"
9.50"
20.50"
7" 8" 10" 12"
14ʺ 16ʺ 18ʺSIZE
A
B
C
D
14.00ʺ
17.00ʺ
16.00ʺ
19.00ʺ
18.00ʺ
21.00ʺ
7.81ʺ
6.25ʺ
7.25ʺ
6.50ʺ
7.50ʺ
6.81ʺ
A
B
SIZE 6ʺ 7ʺ 8ʺ 10ʺ 12ʺ
6.00"
12.44"
7.00"
13.44"
8.00"
14.44"
10.00"
17.00"
12.00"
19.00"
A
B
2"- 6"
9.06ʺ 10.06ʺ 11.06ʺ
SIZE
A
6ʺ 7ʺ 8ʺ
B 12.00ʺ 12.00ʺ 12.00ʺ
6.00ʺ 7.00ʺ 8.00ʺ 10.00ʺ 12.00ʺ
SIZE
A
6ʺ 7ʺ 8ʺ 12ʺ
B 9.00ʺ 10.00ʺ 11.00ʺ 13.00ʺ 15.00ʺ
9.10ʺ 10.10ʺ 11.10ʺ 13.10ʺ 15.10ʺ
SIZE
A
6ʺ 7ʺ 8ʺ 10ʺA
4.00
A
B
A
4.50
B
Note: Available in stainless steel, please contact factory.
9.00ʺ 10.00ʺ 11.00ʺ 13.00ʺ 15.00ʺ
6ʺ 7ʺ 8ʺ 10ʺ 12ʺSIZE
A
14ʺ 16ʺ
17.00ʺ 19.00ʺ
A
1.50
SUPPORT BAND - 6" - 16" TGSB
9.00ʺ 10.00ʺ 11.00ʺ
SIZE
A
Adjustable from 32ʺ to 60ʺ
AB
ROOF BRACE - 6" - 8" TGRB
B
A
C
WALL BAND - 6" - 18" TGWB
WALL BAND ADJUSTMENT KIT - TGWBA - KIT FITS 6", 7" AND 8"
Note: Available in stainless steel, please contact factory
ADJUSTABLE SUPPORT - 6" - 12" TGAS
PITCHED CEILING PLATE - 6" - 8" TGPCP
PAINTED TRIM SLEEVE - 6" - 8" TGTS
SINGLE/DOUBLE WALL ADAPTER - 6" - 8" TGPSWA (Painted) & 10" - 12" TGSWA (Unpainted)
The single/double wall adapter is used to providetransition from single wall or double wall pipe toTemp/Guard chimney pipe.
*10" & 12" are unpainted.
14.00ʺ 16.00ʺ 18.00ʺ
17.00ʺ 19.00ʺ 21.00ʺ
A
B
SIZE 14ʺ 16ʺ 18ʺ
22.00ʺ 24.00ʺ 26.00ʺC
ANCHOR PLATE - 14" - 18" TGAPB
CSQUARE
A
Note: Available in stainless steel, please contact factory
A
12"
SIZE 6" 7" 8"
A 9.00" 10.00" 11.00"
10" 12" 14"
13.00" 15.00" 17.00"
16"
19.00"
18"
21.00"
B 6.50" 7.00" 7.50" 8.50" 9.50"
10"
10.50" 11.50" 12.50"
C 16.00" 16.00" 16.00" 16.00" 17.50" 18.00" 20.00" 22.00"
14" 16" 18"
B
Note: For odd roof pitches; 3/12, 5/12 etc.; use thesteeper pitch. (i.e. use the 4/12 ceiling plate on a3/12 pitch ceiling)
9.06ʺ 10.06ʺ 11.06ʺ
SIZE
A
6ʺ 7ʺ 8ʺ
B 12.00ʺ 12.00ʺ 12.00ʺ
6.00ʺ 7.00ʺ 8.00ʺ 10.00ʺ 12.00ʺ
SIZE
A
6ʺ 7ʺ 8ʺ 12ʺ
B 9.00ʺ 10.00ʺ 11.00ʺ 13.00ʺ 15.00ʺ
9.10ʺ 10.10ʺ 11.10ʺ 13.10ʺ 15.10ʺ
SIZE
A
6ʺ 7ʺ 8ʺ 10ʺA
4.00
A
B
A
4.50
B
Note: Available in stainless steel, please contact factory.
9.00ʺ 10.00ʺ 11.00ʺ 13.00ʺ 15.00ʺ
6ʺ 7ʺ 8ʺ 10ʺ 12ʺSIZE
A
14ʺ 16ʺ
17.00ʺ 19.00ʺ
A
1.50
SUPPORT BAND - 6" - 16" TGSB
9.00ʺ 10.00ʺ 11.00ʺ
SIZE
A
Adjustable from 32ʺ to 60ʺ
AB
ROOF BRACE - 6" - 8" TGRB
B
A
C
WALL BAND - 6" - 18" TGWB
WALL BAND ADJUSTMENT KIT - TGWBA - KIT FITS 6", 7" AND 8"
Note: Available in stainless steel, please contact factory
ADJUSTABLE SUPPORT - 6" - 12" TGAS
PITCHED CEILING PLATE - 6" - 8" TGPCP
PAINTED TRIM SLEEVE - 6" - 8" TGTS
SINGLE/DOUBLE WALL ADAPTER - 6" - 8" TGPSWA (Painted) & 10" - 12" TGSWA (Unpainted)
The single/double wall adapter is used to providetransition from single wall or double wall pipe toTemp/Guard chimney pipe.
*10" & 12" are unpainted.
14.00ʺ 16.00ʺ 18.00ʺ
17.00ʺ 19.00ʺ 21.00ʺ
A
B
SIZE 14ʺ 16ʺ 18ʺ
22.00ʺ 24.00ʺ 26.00ʺC
ANCHOR PLATE - 14" - 18" TGAPB
CSQUARE
A
Note: Available in stainless steel, please contact factory
A
12"
SIZE 6" 7" 8"
A 9.00" 10.00" 11.00"
10" 12" 14"
13.00" 15.00" 17.00"
16"
19.00"
18"
21.00"
B 6.50" 7.00" 7.50" 8.50" 9.50"
10"
10.50" 11.50" 12.50"
C 16.00" 16.00" 16.00" 16.00" 17.50" 18.00" 20.00" 22.00"
14" 16" 18"
B
Note: For odd roof pitches; 3/12, 5/12 etc.; use thesteeper pitch. (i.e. use the 4/12 ceiling plate on a3/12 pitch ceiling)
6.00ʺ 7.00ʺ 8.00ʺ
9.00ʺ 10.00ʺ 11.00ʺ 13.00ʺ 15.00ʺ
SIZE
A
B
6ʺ 7ʺ 8ʺ 10ʺ 12ʺ
13.50ʺ 13.50ʺ 15.50ʺ 19.13ʺ 19.13ʺC
6.00ʺ 7.00ʺ 8.00ʺ 10.00ʺ 12.00ʺ
9.00ʺ 10.00ʺ 11.00ʺ 13.00ʺ 15.00ʺ
SIZE
A
B
6ʺ 7ʺ 8ʺ 10ʺ 12ʺ
13.50ʺ 13.50ʺ 15.50ʺ 19.13ʺ 19.13ʺC
14ʺ 16ʺ 18ʺSIZE
A
B
C
14.00ʺ
17.00ʺ
19.13ʺ
16.00ʺ
19.00ʺ
21.00ʺ
18.00ʺ
21.00ʺ
24.00ʺSIZE
A
B
6ʺ 7ʺ 8ʺ 10ʺ 12ʺ
C 4.00ʺ to 7.50ʺA B
C
AB
C
13.50
B
C
11.50
A
B
C
11.50
AAB
C
9.88
B
A
C
SIZE
A
A
13.00ʺ 15.00ʺ 17.00ʺ 19.00ʺ 21.00ʺA 23.00ʺ
A
10.00
12ʺ-18ʺ 8ʺ-16ʺ
9.00ʺ 10.00ʺ 11.00ʺ 13.00ʺ 15.00ʺ
18.00ʺ 18.00ʺ 18.00ʺ 18.00ʺ 18.00ʺ
SIZE
A
B
6ʺ 7ʺ 8ʺ 10ʺ 12ʺ
17.00ʺ 18.00ʺ 19.00ʺ 21.00ʺ 23.00ʺC
A
C
B
15.88ʺ 16.88ʺ 17.88ʺ 21.00ʺ 23.00ʺ
12.94ʺ 13.94ʺ 14.94ʺ 16.94ʺ 18.94ʺ
SIZE
A
B
6ʺ 7ʺ 8ʺ 10ʺ 12ʺ
1.00ʺ 1.00ʺ 1.00ʺ 1.00ʺ 1.00ʺC 25.00ʺ
21.00ʺ
19.00ʺ 21.00ʺ
23.00ʺ
27.00ʺ
23.00ʺ
25.00ʺ
29.00ʺ
14ʺ 16ʺ 18ʺ
14ʺ- 18"
6ʺ- 12"
A
B C
BC
SQUARE
1.0012.00
A
Note: 14" - 18" insulation shield is not available, attic installation is not intended for these sizes.
Note: Available in stainless steel, please contact factory.
Note: Aluminum or stainless steel materials are recommended for oil and coal applications.
FIRESTOP ASSEMBLY - TGFSA
WALL THIMBLE - 6" - 12" TGWFSP
INSULATION SHIELD - 6" - 12" TGIS
RADIATION SHIELD - 8" - 18" TGRSH
STAINLESS CAP/SPARK ARRESTER - 6" - 12" TGC
STAINLESS CAP/SPARK ARRESTER - 14" - 18" TGC
STAINLESS DETACHABLE CAP - 6" - 8" TGDC STAINLESS CAP (Rain Cap) - 6" - 12" TGRC
STORM COLLAR - 6" - 8" TGSC and TGASC (Aluminum)10" - 12" TGSC and TGSSC (Stainless)14" - 18" TGSC (Galvanized)
DEAD SOFT ALUMINUM FLASHING - 6" and 8" TGDSF
Wall thimble is used to provide the properclearance for the chimney pipe when passingthrough a combustible wall.
*Can also be used as a firestop.
SIZE 6" 8" 10" 12" 14"7"
SIZE
15.88" 17.88" 21.00" 23.00"16.88"
12.94" 14.94" 16.94" 18.94"13.94"
SIZE
A
B
C
6" 8" 10" 12" 14" 16" 18"7"
9.00" 11.00" 13.00" 15.00" 17.00" 19.00" 21.00"10.00"
SIZE
A
6" 8"
22.25" 24.00"
18.00" 19.50" 21.50" 23.50" 25.50" 27.50" 29.50"18.00"
3.18" 3.18" 3.18" 3.18" 4.25" 4.25" 4.25"3.18"
10.00" 12.00"
6.00ʺ 7.00ʺ 8.00ʺ
9.00ʺ 10.00ʺ 11.00ʺ 13.00ʺ 15.00ʺ
SIZE
A
B
6ʺ 7ʺ 8ʺ 10ʺ 12ʺ
13.50ʺ 13.50ʺ 15.50ʺ 19.13ʺ 19.13ʺC
6.00ʺ 7.00ʺ 8.00ʺ 10.00ʺ 12.00ʺ
9.00ʺ 10.00ʺ 11.00ʺ 13.00ʺ 15.00ʺ
SIZE
A
B
6ʺ 7ʺ 8ʺ 10ʺ 12ʺ
13.50ʺ 13.50ʺ 15.50ʺ 19.13ʺ 19.13ʺC
14ʺ 16ʺ 18ʺSIZE
A
B
C
14.00ʺ
17.00ʺ
19.13ʺ
16.00ʺ
19.00ʺ
21.00ʺ
18.00ʺ
21.00ʺ
24.00ʺSIZE
A
B
6ʺ 7ʺ 8ʺ 10ʺ 12ʺ
C 4.00ʺ to 7.50ʺA B
C
AB
C
13.50
B
C
11.50
A
B
C
11.50
AAB
C
9.88
B
A
C
SIZE
A
A
13.00ʺ 15.00ʺ 17.00ʺ 19.00ʺ 21.00ʺA 23.00ʺ
A
10.00
12ʺ-18ʺ 8ʺ-16ʺ
9.00ʺ 10.00ʺ 11.00ʺ 13.00ʺ 15.00ʺ
18.00ʺ 18.00ʺ 18.00ʺ 18.00ʺ 18.00ʺ
SIZE
A
B
6ʺ 7ʺ 8ʺ 10ʺ 12ʺ
17.00ʺ 18.00ʺ 19.00ʺ 21.00ʺ 23.00ʺC
A
C
B
15.88ʺ 16.88ʺ 17.88ʺ 21.00ʺ 23.00ʺ
12.94ʺ 13.94ʺ 14.94ʺ 16.94ʺ 18.94ʺ
SIZE
A
B
6ʺ 7ʺ 8ʺ 10ʺ 12ʺ
1.00ʺ 1.00ʺ 1.00ʺ 1.00ʺ 1.00ʺC 25.00ʺ
21.00ʺ
19.00ʺ 21.00ʺ
23.00ʺ
27.00ʺ
23.00ʺ
25.00ʺ
29.00ʺ
14ʺ 16ʺ 18ʺ
14ʺ- 18"
6ʺ- 12"
A
B C
BC
SQUARE
1.0012.00
A
Note: 14" - 18" insulation shield is not available, attic installation is not intended for these sizes.
Note: Available in stainless steel, please contact factory.
Note: Aluminum or stainless steel materials are recommended for oil and coal applications.
FIRESTOP ASSEMBLY - TGFSA
WALL THIMBLE - 6" - 12" TGWFSP
INSULATION SHIELD - 6" - 12" TGIS
RADIATION SHIELD - 8" - 18" TGRSH
STAINLESS CAP/SPARK ARRESTER - 6" - 12" TGC
STAINLESS CAP/SPARK ARRESTER - 14" - 18" TGC
STAINLESS DETACHABLE CAP - 6" - 8" TGDC STAINLESS CAP (Rain Cap) - 6" - 12" TGRC
STORM COLLAR - 6" - 8" TGSC and TGASC (Aluminum)10" - 12" TGSC and TGSSC (Stainless)14" - 18" TGSC (Galvanized)
DEAD SOFT ALUMINUM FLASHING - 6" and 8" TGDSF
Wall thimble is used to provide the properclearance for the chimney pipe when passingthrough a combustible wall.
*Can also be used as a firestop.
SIZE 6" 8" 10" 12" 14"7"
SIZE
15.88" 17.88" 21.00" 23.00"16.88"
12.94" 14.94" 16.94" 18.94"13.94"
SIZE
A
B
C
6" 8" 10" 12" 14" 16" 18"7"
9.00" 11.00" 13.00" 15.00" 17.00" 19.00" 21.00"10.00"
SIZE
A
6" 8"
22.25" 24.00"
18.00" 19.50" 21.50" 23.50" 25.50" 27.50" 29.50"18.00"
3.18" 3.18" 3.18" 3.18" 4.25" 4.25" 4.25"3.18"
10.00" 12.00"
NOTE: In 6" - 8" aluminum option material is recommended for oil and coal applications.
SIZE A SIZE A B SIZE A B SIZE A B
6ʺ
7ʺ
8ʺ
10ʺ
12ʺ
6ʺ
7ʺ
8ʺ
10ʺ
12ʺ
SIZE A
6ʺ
7ʺ
8ʺ
10ʺ
12ʺ
14ʺ
16ʺ
18ʺ
6ʺ
8ʺ
*10ʺ
*12ʺ
6ʺ
8ʺ
28.88ʺ
30.50ʺ
35.75ʺ
38.40ʺ
22.25ʺ
24.00ʺ
24.00ʺ
26.75ʺ
21.00ʺ
22.00ʺ
28.50ʺ
27.00ʺ
38.00ʺ
43.50ʺ
29.00ʺ 41.60ʺ 29.00ʺ
23.00ʺ
25.70ʺ
28.50ʺ
30.75ʺ
35.35ʺ
37.50ʺ
23.50ʺ
25.25ʺ
28.75ʺ
30.25ʺ
22.25ʺ
24.00ʺ
24.00ʺ
26.75ʺ
29.00ʺ
33.00ʺ
35.00ʺ
37.00ʺ
A
A
ASQUARE
11.75
A
B
A
B
A
B
11.75
1.00
ASQUARE
Fits roof pitchfrom FLAT to 2/12
NOTE: Aluminum option material is recommended for oil and coal applications.
TGGCK5 (Galvanized) or TGCK5 (Stainless)Available in 6" & 8"Includes: Cap Flashing Storm Collar Painted Ceiling Support 36" Length of Pipe 24" Length of Pipe
TGCK (Galvanized only)Available in 6", 7", & 8"Includes: Cap Flashing Storm Collar Painted Ceiling Support 48" Length MST Tape
TGGTWK (Galvanized) or TGTWK (Stainless)Available in 6" & 8"Includes: Cap Flashing Storm Collar 2-Wall Bands Inuslated Tee Cap Wall Firestop Wall Support/Adapter 6" Length of Pipe Single Wall Adapter
Note: Available in galvanized only.
PITCHED ROOF FLASHINGS
FLAT ROOF FLASHINGS
VERTICAL INSTALLATION KIT
VERTICAL INSTALLATION KIT
THROUGH THE WALLINSTALLATION KIT
BLACK PIPE TELESCOPING PIPE SECTIONS BLACK PIPE - RIGID PIPE SECTIONS
Painted Flat-Matte Black Stovepipe - Single Wall and Double Wall
BLACK PIPE INTERIOR WITH OFFSETBLACK PIPE INTERIOR INTO MASONRY CHIMNEY
NOTE: In 6" - 8" aluminum option material is recommended for oil and coal applications.
SIZE A SIZE A B SIZE A B SIZE A B
6ʺ
7ʺ
8ʺ
10ʺ
12ʺ
6ʺ
7ʺ
8ʺ
10ʺ
12ʺ
SIZE A
6ʺ
7ʺ
8ʺ
10ʺ
12ʺ
14ʺ
16ʺ
18ʺ
6ʺ
8ʺ
*10ʺ
*12ʺ
6ʺ
8ʺ
28.88ʺ
30.50ʺ
35.75ʺ
38.40ʺ
22.25ʺ
24.00ʺ
24.00ʺ
26.75ʺ
21.00ʺ
22.00ʺ
28.50ʺ
27.00ʺ
38.00ʺ
43.50ʺ
29.00ʺ 41.60ʺ 29.00ʺ
23.00ʺ
25.70ʺ
28.50ʺ
30.75ʺ
35.35ʺ
37.50ʺ
23.50ʺ
25.25ʺ
28.75ʺ
30.25ʺ
22.25ʺ
24.00ʺ
24.00ʺ
26.75ʺ
29.00ʺ
33.00ʺ
35.00ʺ
37.00ʺ
A
A
ASQUARE
11.75
A
B
A
B
A
B
11.75
1.00
ASQUARE
Fits roof pitchfrom FLAT to 2/12
NOTE: Aluminum option material is recommended for oil and coal applications.
TGGCK5 (Galvanized) or TGCK5 (Stainless)Available in 6" & 8"Includes: Cap Flashing Storm Collar Painted Ceiling Support 36" Length of Pipe 24" Length of Pipe
TGCK (Galvanized only)Available in 6", 7", & 8"Includes: Cap Flashing Storm Collar Painted Ceiling Support 48" Length MST Tape
TGGTWK (Galvanized) or TGTWK (Stainless)Available in 6" & 8"Includes: Cap Flashing Storm Collar 2-Wall Bands Inuslated Tee Cap Wall Firestop Wall Support/Adapter 6" Length of Pipe Single Wall Adapter
Note: Available in galvanized only.
PITCHED ROOF FLASHINGS
FLAT ROOF FLASHINGS
VERTICAL INSTALLATION KIT
VERTICAL INSTALLATION KIT
THROUGH THE WALLINSTALLATION KIT
BLACK PIPE TELESCOPING PIPE SECTIONS BLACK PIPE - RIGID PIPE SECTIONS
Painted Flat-Matte Black Stovepipe - Single Wall and Double Wall
BLACK PIPE INTERIOR WITH OFFSETBLACK PIPE INTERIOR INTO MASONRY CHIMNEY
MODEL TL48 MODEL TL66
SIZE
6ʺ
8ʺ
MIN L MAX L MIN L MAX L
26.00ʺ
26.00ʺ
48.00ʺ
48.00ʺ
36.00ʺ
36.00ʺ
66.00ʺ
66.00ʺ
26.00ʺ 48.00ʺ 36.00ʺ 66.00ʺ
7ʺLENGTHS
24ʺ12ʺ 48ʺ
X
X
X
X
X
X
XX
SIZE
6ʺ
8ʺ
7ʺ
A
6.00ʺ
7.00ʺ
8.00ʺ
SIZE
6ʺ
8ʺ
7ʺ
A
14.00
A
B
C
D
D
AB
C
A
C
4.00B
SIZE
6ʺ
8ʺ
A B C
7.00ʺ
8.00ʺ
14.00ʺ
16.00ʺ
6.00ʺ
8.00ʺ
A
5.38
SIZE
6ʺ
8ʺ
A
6.00ʺ
7.00ʺ7ʺ
8.00ʺ
BA
A
B
C
SIZE
6ʺ to 8"
A B C
6.00ʺ
7.00ʺ7ʺ to 8"
8.00ʺ
8.00ʺ
4.37ʺ
3.75ʺ
SIZE
6ʺ
8ʺ
A B C D
6.00ʺ
8.00ʺ
3.50ʺ
4.63ʺ
2.38ʺ
5.00ʺ
3.63ʺ
SIZE
6ʺ
7ʺ
A B C
8ʺ
6.00ʺ
7.00ʺ
8.00ʺ
SIZE
6ʺ
8ʺ
A B
6.13ʺ
8.13ʺ
8.88ʺ
10.88ʺ
10.13ʺ
11.88ʺ
12.25ʺ
10.38ʺ
12.00ʺ
12.50ʺ
L
Note: Two-piece elbow for 8" diameter.
PIPE SECTION - SW TELESCOPING LENGTH - SWTL
SLIP CONNECTOR - SW14S
45° ELBOW - SW45 90° ELBOW - SW90
TEE W/TEE CAP - SWT STOVE TOP ADAPTER - SWA1
TRIM COLLAR - SWTC INCREASER - SWI8
LENGTHS
SIZE
6ʺ
8ʺ
24ʺ12ʺ 48ʺ
X
X
X
X X
O.D.
X
7.00ʺ
9.00ʺ
MODEL TL48 MODEL TL66
SIZE
6ʺ
8ʺ
MIN L MAX L MIN L MAX L
26.00ʺ
26.00ʺ
48.00ʺ
48.00ʺ
36.00ʺ
36.00ʺ
66.00ʺ
66.00ʺ
6.00ʺ 7.00ʺ
8.00ʺ 9.00ʺ 13.50ʺ
A B CSIZE
6ʺ
8ʺ 13.50ʺ
D
12.50ʺ 12.50ʺ
MODEL 8A MODEL 18A
6ʺ
8ʺ
MIN L MAX L A MAX L
3.00ʺ
3.00ʺ
6.00ʺ
6.00ʺ
7.00ʺ
7.00ʺ
16.00ʺ
16.00ʺ
MIN L A
6.00ʺ
6.00ʺ
17.00ʺ
17.00ʺ
SIZE
BA
D
3.00
C
SIZE
6ʺ
A B
6.00ʺ
8.00ʺ8ʺ
7.00ʺ
9.00ʺ
C D
13.37ʺ
15.12ʺ 7.61ʺ
6.82ʺ
BA
D
C
A
L
PIPE SECTION - DWB
TELESCOPING LENGTH - DWBTL
6.00ʺ 7.00ʺ 5.00ʺ
8.00ʺ 9.00ʺ 4.60ʺ
A B CSIZE
6ʺ
8ʺ
4.38ʺ
4.80ʺ
D
BA
C
D
45° ELBOW - DWB45
BA
6.00
SIZE
6ʺ
8ʺ
A B
7.00ʺ
9.00ʺ
6.00ʺ
8.00ʺ
STOVE TOP ADAPTER- DWBA
ADJUSTABLE LENGTHS - DWB8A & 18A
TEE - W/TEE CAP - DWBT
90° ELBOW - DWB90
SIZE
6.00ʺ to 8.00ʺ
6.00
8.00
4.13
INCREASER - DWBI-8
BA
SIZE
6ʺ
A B
7.13ʺ 9.88ʺ
8ʺ 9.13ʺ 11.88ʺ
TRIM COLLAR - DWBTR
“L” = Installed Length
MODEL TL48 MODEL TL66
SIZE
6ʺ
8ʺ
MIN L MAX L MIN L MAX L
26.00ʺ
26.00ʺ
48.00ʺ
48.00ʺ
36.00ʺ
36.00ʺ
66.00ʺ
66.00ʺ
26.00ʺ 48.00ʺ 36.00ʺ 66.00ʺ
7ʺLENGTHS
24ʺ12ʺ 48ʺ
X
X
X
X
X
X
XX
SIZE
6ʺ
8ʺ
7ʺ
A
6.00ʺ
7.00ʺ
8.00ʺ
SIZE
6ʺ
8ʺ
7ʺ
A
14.00
A
B
C
D
D
AB
C
A
C
4.00B
SIZE
6ʺ
8ʺ
A B C
7.00ʺ
8.00ʺ
14.00ʺ
16.00ʺ
6.00ʺ
8.00ʺ
A
5.38
SIZE
6ʺ
8ʺ
A
6.00ʺ
7.00ʺ7ʺ
8.00ʺ
BA
A
B
C
SIZE
6ʺ to 8"
A B C
6.00ʺ
7.00ʺ7ʺ to 8"
8.00ʺ
8.00ʺ
4.37ʺ
3.75ʺ
SIZE
6ʺ
8ʺ
A B C D
6.00ʺ
8.00ʺ
3.50ʺ
4.63ʺ
2.38ʺ
5.00ʺ
3.63ʺ
SIZE
6ʺ
7ʺ
A B C
8ʺ
6.00ʺ
7.00ʺ
8.00ʺ
SIZE
6ʺ
8ʺ
A B
6.13ʺ
8.13ʺ
8.88ʺ
10.88ʺ
10.13ʺ
11.88ʺ
12.25ʺ
10.38ʺ
12.00ʺ
12.50ʺ
L
Note: Two-piece elbow for 8" diameter.
PIPE SECTION - SW TELESCOPING LENGTH - SWTL
SLIP CONNECTOR - SW14S
45° ELBOW - SW45 90° ELBOW - SW90
TEE W/TEE CAP - SWT STOVE TOP ADAPTER - SWA1
TRIM COLLAR - SWTC INCREASER - SWI8
LENGTHS
SIZE
6ʺ
8ʺ
24ʺ12ʺ 48ʺ
X
X
X
X X
O.D.
X
7.00ʺ
9.00ʺ
MODEL TL48 MODEL TL66
SIZE
6ʺ
8ʺ
MIN L MAX L MIN L MAX L
26.00ʺ
26.00ʺ
48.00ʺ
48.00ʺ
36.00ʺ
36.00ʺ
66.00ʺ
66.00ʺ
6.00ʺ 7.00ʺ
8.00ʺ 9.00ʺ 13.50ʺ
A B CSIZE
6ʺ
8ʺ 13.50ʺ
D
12.50ʺ 12.50ʺ
MODEL 8A MODEL 18A
6ʺ
8ʺ
MIN L MAX L A MAX L
3.00ʺ
3.00ʺ
6.00ʺ
6.00ʺ
7.00ʺ
7.00ʺ
16.00ʺ
16.00ʺ
MIN L A
6.00ʺ
6.00ʺ
17.00ʺ
17.00ʺ
SIZE
BA
D
3.00
C
SIZE
6ʺ
A B
6.00ʺ
8.00ʺ8ʺ
7.00ʺ
9.00ʺ
C D
13.37ʺ
15.12ʺ 7.61ʺ
6.82ʺ
BA
D
C
A
L
PIPE SECTION - DWB
TELESCOPING LENGTH - DWBTL
6.00ʺ 7.00ʺ 5.00ʺ
8.00ʺ 9.00ʺ 4.60ʺ
A B CSIZE
6ʺ
8ʺ
4.38ʺ
4.80ʺ
D
BA
C
D
45° ELBOW - DWB45
BA
6.00
SIZE
6ʺ
8ʺ
A B
7.00ʺ
9.00ʺ
6.00ʺ
8.00ʺ
STOVE TOP ADAPTER- DWBA
ADJUSTABLE LENGTHS - DWB8A & 18A
TEE - W/TEE CAP - DWBT
90° ELBOW - DWB90
SIZE
6.00ʺ to 8.00ʺ
6.00
8.00
4.13
INCREASER - DWBI-8
BA
SIZE
6ʺ
A B
7.13ʺ 9.88ʺ
8ʺ 9.13ʺ 11.88ʺ
TRIM COLLAR - DWBTR
“L” = Installed Length
Notes: 1. Air-Cooled Temp/Guard chimney, 12" & 14" utilize a Button-Lock Tab design.2. Wall Band, Support Band and Radiation Shield are the same parts for TG & ATG.
AIR- COOLED TEMP/GUARD CHIMNEY EXTENSION AIR- COOLED TEMP/GUARD OUTDOOR FIREPLACE
12, 18, 36, and 48 inch lengths
CHIMNEY PIPE(Aluminized Outer Casing) - ATG (8ʺ , 10", & 16ʺ) AIRTG (12" & 14")
NOTE: 8ʺ-16ʺ listed to 1700°F intermittent;1000°F continuous.
8ʺ 10ʺ 12ʺ 14ʺ 16ʺSIZE
A
B
C
8.00ʺ
11.00ʺ
10.00ʺ
13.00ʺ
12.00ʺ
15.00ʺ
14.00ʺ
17.00ʺ
16.00ʺ
19.00ʺ
AB
C
15º ANGLE (Aluminized Outer Casing) - ATGA15 (8ʺ , 10", & 16ʺ) AIRTGA15 (12" & 14")
8ʺ 10ʺ 12ʺ 14ʺ 16ʺSIZE
A
B
C
D
8.00ʺ
11.00ʺ
10.00ʺ
13.00ʺ
4.88ʺ
12.00ʺ
15.00ʺ
5.00ʺ
5.88ʺ 6.00ʺ
14.00ʺ
17.00ʺ
5.13ʺ
16.00ʺ
19.00ʺ
5.25ʺ
6.13ʺ 6.25ʺ
AB
15°
D
C4.75ʺ
5.75ʺ
NOTE: See installation instructions for offset chart.
8ʺ 10ʺ 12ʺ 14ʺ 16ʺSIZE
A
B
C
D
8.00ʺ
11.00ʺ
10.00ʺ
13.00ʺ
5.75ʺ
12.00ʺ
15.00ʺ
6.00ʺ
6.75ʺ 7.00ʺ
14.00ʺ
17.00ʺ
6.30ʺ
16.00ʺ
19.00ʺ
6.55ʺ
7.30ʺ 7.55ʺ
AB
30°
D
C
5.48ʺ
6.48ʺ
NOTE: See installation instructions for offset chart.
30º ANGLE (Aluminized Outer Casing) - ATGA30 (8ʺ , 10", & 16ʺ) AIRTGA30 (12" & 14")
8ʺ 10ʺ 12ʺ 14ʺ 16ʺSIZE
A
B
C
8.00ʺ
11.00ʺ
16.00ʺ
10.00ʺ
13.00ʺ
18.00ʺ
12.00ʺ
15.00ʺ
20.00ʺ
14.00ʺ
17.00ʺ
21.00ʺ
16.00ʺ
19.00ʺ
23.00ʺ
BA
C
5.00
ANCHOR PLATE - ATGAP (8ʺ , 10", & 16ʺ) AIRTGAP (12" & 14")
8ʺ 10ʺ 12ʺ 14ʺ 16ʺSIZE
A
B
C
8.00ʺ
11.00ʺ
16.00ʺ
10.00ʺ
13.00ʺ
18.00ʺ
12.00ʺ
15.00ʺ
20.00ʺ
14.00ʺ
17.00ʺ
21.00ʺ
16.00ʺ
19.00ʺ
23.00ʺ
BA
C
5.00
ANCHOR PLATE W/ DAMPER - ATGAPD (8ʺ , 10", & 16ʺ) AIRTGAPD (12" & 14")
Note: Air-Cooled Temp/Guard chimney, 12" & 14" utilize a Button-Lock Tab design.
Note: Air-Cooled Temp/Guard chimney, 12" & 14" utilize a Button-Lock Tab design.
Notes: 1. Air-Cooled Temp/Guard chimney, 12" & 14" utilize a Button-Lock Tab design.2. Wall Band, Support Band and Radiation Shield are the same parts for TG & ATG.
AIR- COOLED TEMP/GUARD CHIMNEY EXTENSION AIR- COOLED TEMP/GUARD OUTDOOR FIREPLACE
12, 18, 36, and 48 inch lengths
CHIMNEY PIPE(Aluminized Outer Casing) - ATG (8ʺ , 10", & 16ʺ) AIRTG (12" & 14")
NOTE: 8ʺ-16ʺ listed to 1700°F intermittent;1000°F continuous.
8ʺ 10ʺ 12ʺ 14ʺ 16ʺSIZE
A
B
C
8.00ʺ
11.00ʺ
10.00ʺ
13.00ʺ
12.00ʺ
15.00ʺ
14.00ʺ
17.00ʺ
16.00ʺ
19.00ʺ
AB
C
15º ANGLE (Aluminized Outer Casing) - ATGA15 (8ʺ , 10", & 16ʺ) AIRTGA15 (12" & 14")
8ʺ 10ʺ 12ʺ 14ʺ 16ʺSIZE
A
B
C
D
8.00ʺ
11.00ʺ
10.00ʺ
13.00ʺ
4.88ʺ
12.00ʺ
15.00ʺ
5.00ʺ
5.88ʺ 6.00ʺ
14.00ʺ
17.00ʺ
5.13ʺ
16.00ʺ
19.00ʺ
5.25ʺ
6.13ʺ 6.25ʺ
AB
15°
D
C4.75ʺ
5.75ʺ
NOTE: See installation instructions for offset chart.
8ʺ 10ʺ 12ʺ 14ʺ 16ʺSIZE
A
B
C
D
8.00ʺ
11.00ʺ
10.00ʺ
13.00ʺ
5.75ʺ
12.00ʺ
15.00ʺ
6.00ʺ
6.75ʺ 7.00ʺ
14.00ʺ
17.00ʺ
6.30ʺ
16.00ʺ
19.00ʺ
6.55ʺ
7.30ʺ 7.55ʺ
AB
30°
D
C
5.48ʺ
6.48ʺ
NOTE: See installation instructions for offset chart.
30º ANGLE (Aluminized Outer Casing) - ATGA30 (8ʺ , 10", & 16ʺ) AIRTGA30 (12" & 14")
8ʺ 10ʺ 12ʺ 14ʺ 16ʺSIZE
A
B
C
8.00ʺ
11.00ʺ
16.00ʺ
10.00ʺ
13.00ʺ
18.00ʺ
12.00ʺ
15.00ʺ
20.00ʺ
14.00ʺ
17.00ʺ
21.00ʺ
16.00ʺ
19.00ʺ
23.00ʺ
BA
C
5.00
ANCHOR PLATE - ATGAP (8ʺ , 10", & 16ʺ) AIRTGAP (12" & 14")
8ʺ 10ʺ 12ʺ 14ʺ 16ʺSIZE
A
B
C
8.00ʺ
11.00ʺ
16.00ʺ
10.00ʺ
13.00ʺ
18.00ʺ
12.00ʺ
15.00ʺ
20.00ʺ
14.00ʺ
17.00ʺ
21.00ʺ
16.00ʺ
19.00ʺ
23.00ʺ
BA
C
5.00
ANCHOR PLATE W/ DAMPER - ATGAPD (8ʺ , 10", & 16ʺ) AIRTGAPD (12" & 14")
Note: Air-Cooled Temp/Guard chimney, 12" & 14" utilize a Button-Lock Tab design.
Note: Air-Cooled Temp/Guard chimney, 12" & 14" utilize a Button-Lock Tab design.
Note: Air-Cooled Temp/Guard chimney, 12" & 14" utilize a Button-Lock Tab design.
Note: Air-Cooled Temp/Guard chimney, 12" & 14" utilize a Button-Lock Tab design.
STAINLESS CAP/SPARK ARRESTER - ATGC (8ʺ , 10", & 16ʺ) AIRTGC (12" & 14")
8ʺ 10ʺ 12ʺ 14ʺ 16ʺSIZE
A
B
C
8.00ʺ
11.00ʺ
15.50ʺ
10.00ʺ
13.00ʺ
19.13ʺ
12.00ʺ
15.00ʺ
19.13ʺ
14.00ʺ
17.00ʺ
19.13ʺ
16.00ʺ
19.00ʺ
21.00ʺAB
C
13.00
CHASE FLASHINGS - ATGFC (8ʺ , 10", & 16ʺ) AIRTGFC (12" & 14")
8ʺ 10ʺ 12ʺ 14ʺ 16ʺSIZE
A
B
15.00ʺ
21.25ʺ
17.00ʺ
23.25ʺ
19.00ʺ
25.25ʺ
21.00ʺ
27.25ʺ
23.00ʺ
29.25ʺAB
4.25
1.00
8ʺ 10ʺ 12ʺ 14ʺ 16ʺSIZE
A
B
11.00ʺ
18.75ʺ
13.00ʺ
20.75ʺ
15.00ʺ
22.75ʺ
17.00ʺ
24.75ʺ
19.00ʺ
26.75ʺB
A
4.25
STORM COLLAR - ATGSC (8ʺ , 10", & 16ʺ) AIRTGSC (12" & 14")
NOTE: For 8" diameter aluminum option material isrecommended for oil and coal applications.
8ʺ 10ʺ 12ʺ 14ʺ 16ʺSIZE
A 25.50ʺ 27.50ʺ 29.50ʺ 31.50ʺ 33.50ʺ
ASQUARE
11.75
1.00
FLAT
FLAT ROOF FLASHINGS - ATGFT (8ʺ , 10", & 16ʺ) AIRTGFT (12" & 14")
INSULLATION SHIELD - ATGIS (8ʺ , 10", & 16ʺ) AIRTGIS (12" & 14")
8ʺ 10ʺ 12ʺ 14ʺ 16ʺSIZE
A
B
C
11.00ʺ
15.00ʺ
19.00ʺ
13.00ʺ
17.00ʺ
21.00ʺ
15.00ʺ
19.00ʺ
23.00ʺ
17.00ʺ
21.00ʺ
25.00ʺ
19.00ʺ
23.00ʺ
27.00ʺ
18.00
AB
CSQUARE
FIRESTOP ASSEMBLY - ATGFSA (14ʺ - 16ʺ)
A
BC
SQUARE
1.00
15.00
15.00
SIZE
A
B
C
14ʺ 16ʺ
19.00ʺ
20.94ʺ
25.00ʺ
21.00ʺ
22.94ʺ
27.00ʺ
FIRESTOP ASSEMBLY - ATGFSA (8ʺ - 12ʺ)
8ʺ 10ʺ 12ʺSIZE
A
B
C
18.19ʺ
14.94ʺ
11.38ʺ
20.19ʺ
16.94ʺ
13.38ʺ
22.19ʺ
18.94ʺ
15.38ʺ
1.00
A
BC
STAINLESS CAP (Rain Cap) - ATGRC (8ʺ & 10") AIRTGRC (12" & 14")
8ʺ 10ʺ 12ʺSIZE
A
B
C
8.00ʺ
11.00ʺ
15.50ʺ
10.00ʺ
13.00ʺ
19.13ʺ
12.00ʺ
15.00ʺ
19.13ʺ
D 9.75ʺ 11.50ʺ 11.50ʺBA
D
C
14ʺ
14.00ʺ
17.00ʺ
11.50ʺ
19.13ʺ
SIZE A SIZE A B SIZE A B SIZE A B
8ʺ
10ʺ
12ʺ
8ʺ
10ʺ
12ʺ
*10ʺ
*12ʺ
8ʺ35.75ʺ
38.40ʺ
24.00ʺ
26.75ʺ
28.50ʺ
27.00ʺ
43.50ʺ
29.00ʺ 41.60ʺ 29.00ʺ
25.70ʺ35.35ʺ
37.50ʺ
28.75ʺ
30.25ʺ
A
A
A
B
A
B B
A
NOTE: Aluminum option material is recommended for oil and coal applications.
Note: Available in galvanized only.
PITCHED ROOF FLASHINGS
11.00ʺ
SIZE
A
8ʺ
B Adjustable from 32ʺ to 60ʺ
AB
ROOF BRACE - 6" - 8" TGRB
1/12
Note: Air-Cooled Temp/Guard chimney, 12" & 14" utilize a Button-Lock Tab design.
Note: Air-Cooled Temp/Guard chimney, 12" & 14" utilize a Button-Lock Tab design.
STAINLESS CAP/SPARK ARRESTER - ATGC (8ʺ , 10", & 16ʺ) AIRTGC (12" & 14")
8ʺ 10ʺ 12ʺ 14ʺ 16ʺSIZE
A
B
C
8.00ʺ
11.00ʺ
15.50ʺ
10.00ʺ
13.00ʺ
19.13ʺ
12.00ʺ
15.00ʺ
19.13ʺ
14.00ʺ
17.00ʺ
19.13ʺ
16.00ʺ
19.00ʺ
21.00ʺAB
C
13.00
CHASE FLASHINGS - ATGFC (8ʺ , 10", & 16ʺ) AIRTGFC (12" & 14")
8ʺ 10ʺ 12ʺ 14ʺ 16ʺSIZE
A
B
15.00ʺ
21.25ʺ
17.00ʺ
23.25ʺ
19.00ʺ
25.25ʺ
21.00ʺ
27.25ʺ
23.00ʺ
29.25ʺAB
4.25
1.00
8ʺ 10ʺ 12ʺ 14ʺ 16ʺSIZE
A
B
11.00ʺ
18.75ʺ
13.00ʺ
20.75ʺ
15.00ʺ
22.75ʺ
17.00ʺ
24.75ʺ
19.00ʺ
26.75ʺB
A
4.25
STORM COLLAR - ATGSC (8ʺ , 10", & 16ʺ) AIRTGSC (12" & 14")
NOTE: For 8" diameter aluminum option material isrecommended for oil and coal applications.
8ʺ 10ʺ 12ʺ 14ʺ 16ʺSIZE
A 25.50ʺ 27.50ʺ 29.50ʺ 31.50ʺ 33.50ʺ
ASQUARE
11.75
1.00
FLAT
FLAT ROOF FLASHINGS - ATGFT (8ʺ , 10", & 16ʺ) AIRTGFT (12" & 14")
INSULLATION SHIELD - ATGIS (8ʺ , 10", & 16ʺ) AIRTGIS (12" & 14")
8ʺ 10ʺ 12ʺ 14ʺ 16ʺSIZE
A
B
C
11.00ʺ
15.00ʺ
19.00ʺ
13.00ʺ
17.00ʺ
21.00ʺ
15.00ʺ
19.00ʺ
23.00ʺ
17.00ʺ
21.00ʺ
25.00ʺ
19.00ʺ
23.00ʺ
27.00ʺ
18.00
AB
CSQUARE
FIRESTOP ASSEMBLY - ATGFSA (14ʺ - 16ʺ)
A
BC
SQUARE
1.00
15.00
15.00
SIZE
A
B
C
14ʺ 16ʺ
19.00ʺ
20.94ʺ
25.00ʺ
21.00ʺ
22.94ʺ
27.00ʺ
FIRESTOP ASSEMBLY - ATGFSA (8ʺ - 12ʺ)
8ʺ 10ʺ 12ʺSIZE
A
B
C
18.19ʺ
14.94ʺ
11.38ʺ
20.19ʺ
16.94ʺ
13.38ʺ
22.19ʺ
18.94ʺ
15.38ʺ
1.00
A
BC
STAINLESS CAP (Rain Cap) - ATGRC (8ʺ & 10") AIRTGRC (12" & 14")
8ʺ 10ʺ 12ʺSIZE
A
B
C
8.00ʺ
11.00ʺ
15.50ʺ
10.00ʺ
13.00ʺ
19.13ʺ
12.00ʺ
15.00ʺ
19.13ʺ
D 9.75ʺ 11.50ʺ 11.50ʺBA
D
C
14ʺ
14.00ʺ
17.00ʺ
11.50ʺ
19.13ʺ
SIZE A SIZE A B SIZE A B SIZE A B
8ʺ
10ʺ
12ʺ
8ʺ
10ʺ
12ʺ
*10ʺ
*12ʺ
8ʺ35.75ʺ
38.40ʺ
24.00ʺ
26.75ʺ
28.50ʺ
27.00ʺ
43.50ʺ
29.00ʺ 41.60ʺ 29.00ʺ
25.70ʺ35.35ʺ
37.50ʺ
28.75ʺ
30.25ʺ
A
A
A
B
A
B B
A
NOTE: Aluminum option material is recommended for oil and coal applications.
Note: Available in galvanized only.
PITCHED ROOF FLASHINGS
11.00ʺ
SIZE
A
8ʺ
B Adjustable from 32ʺ to 60ʺ
AB
ROOF BRACE - 6" - 8" TGRB
1/12
Designed for corrosive appliances and exhaust systems.
Easiest installation on the market...featuringSureLock™ B-Vent Locking System.
For use with masonry �replaces which,burn wood, oil, coal or gas.
Premium quality, for use with gas-�red appliances.
®
Designed for use with pellet, cornor wheat-�red appliances.
A quality, complete line including2x2 di�users and extruded aluminum.
Designed for use with pellet, cornor wheat-�red appliances.
Stainless steel and aluminum liner kits, connectors, and accessories.
Full line of �re & ceiling radiation dampers. Capacity to �ll high volume orders 100%.
Litho in U.S.A. ©2021 Metal-Fab Inc. Form No. L898-04/2210248