Model Applications

DB-480Installs in 2X6 (or 2X4 walls with furring strip) for venting up or down with a larger receiving

area to accommodate pedestal and stand-alone dryers.

General Information

Benefits:• Locate the dryer right up against the wall• Flex is protected from getting crushed• Lint build-up is minimized• Standard installation on the bottom plate every time• Cleaner, more professional looking finish• Efficiency is increased…clothes dry faster• Laundry room appears larger to prospects• Reduces the fire hazard• Reduces mold potential in the wall

Features:• Accommodates pedestal and stand-alone dryers• No trim-ring piece is needed• Elbow eliminator…gain 5 foot of duct run• Surface is paintable, no masking needed

Manufactured By

Performance Data

For Use:• Dryer vent hose receptacle• Doubles as gas connection receptacle• Meets code requirements as a clean-out

Material:• Deep drawn 22 gauge Aluminized Steel (.028")

US Patents 6,419,102 and 7,731,045

Technical Product Specifications

Made in the USA Dryerbox® – U.S. Patents 6,419,102 and 7,731,045

MODEL 480

17 " overall

23 ½

" ove

rall

4 ¼"

Top Panel View

20 ½

" ins

ide

5 "18

5 "14

flex port

gas port

14" inside

" flange

38

38

Primary Installation Scenarios — Installs 4 Ways

Upward Venting Downward Venting

Stand-alone

Stand-alone

Pedestal

Pedestal

In-O-Vate Technologies, Inc. 250 S. Central Blvd. Suite 207 Jupiter, FL 33458 Telephone: 561-743-8696 Facsimile: 561-745-9723 www.Dryerbox.com