55
For sales use only Not for crane operations N3P0138 1 of 244 HTC---8690 SERIAL NUMBER: CRANE RATING MANUAL HTC---8690 5---Section Boom For Replacement, Order Part Number: N3P0137 (012805) R Link-Belt is a registered trademark. View thousands of Crane Specifications on FreeCraneSpecs.com View thousands of Crane Specifications on FreeCraneSpecs.com

For sales use only HTC---8690 - Free Crane Specs5).pdf · HTC---8690 1 of 244 N3P0138 SERIAL NUMBER: CRANE RATING MANUAL HTC---8690 5---Section Boom For Replacement, Order Part Number:

  • Upload
    others

  • View
    1

  • Download
    0

Embed Size (px)

Citation preview

  • For sa

    les us

    e only

    Not for crane operations

    N3P01381 of 244HTC---8690

    SERIAL NUMBER:

    CRANE RATINGMANUAL

    HTC---86905---Section Boom

    For Replacement, Order Part Number: N3P0137

    (012805)

    R Link-Belt is a registered trademark.

    View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com

  • For sa

    les us

    e only

    Not for crane operations

    N3P0138 2 of 244 HTC---8690

    Table Of ContentsPage Contents3---4 Operating Instructions4 Patent Information5 General Dimensions5 Tire Inflation5 Pontoon Loadings6 Boom Extend Modes7 Boom Mode Performance --- General Reference Guide8 Winch Performance8 Wire Rope Capacity Chart8 Hydraulic Circuit Pressure Settings9 Working Areas9 Capacity Deductions10 Allowable Crane Configuration --- Main Boom10 Wind Speed Restrictions11 Allowable Crane Configuration --- Main Boom + Attachments11 Backward Stability --- Maximum Boom Angle12 Working Range Diagram

    Tab 1 Fully Extended Outriggers13---18 Lifting Capacities, 0 lb CTWT19---24 Lifting Capacities, 2,500 lb CTWT25---32 Lifting Capacities, 5,500 lb CTWT33---40 Lifting Capacities, 8,500 lb CTWT41---50 Lifting Capacities, 11,500 lb CTWT51---62 Lifting Capacities, 14,500 lb CTWT63---74 Lifting Capacities, 17,500 lb CTWT75---86 Lifting Capacities, 20,500 lb CTWT87---98 Lifting Capacities, 23,500 lb CTWT99---110 Lifting Capacities, 26,500 lb CTWT111---122 Lifting Capacities, 29,500 lb CTWT123---134 Lifting Capacities, 32,500 lb CTWT135---146 Lifting Capacities, 39,500 lb CTWT

    Tab 2 Intermediate Extended Outriggers147---150 Lifting Capacities, 0 lb CTWT151---154 Lifting Capacities, 2,500 lb CTWT155---158 Lifting Capacities, 5,500 lb CTWT159---162 Lifting Capacities, 8,500 lb CTWT163---166 Lifting Capacities, 11,500 lb CTWT167---170 Lifting Capacities, 14,500 lb CTWT171---174 Lifting Capacities, 17,500 lb CTWT175---178 Lifting Capacities, 20,500 lb CTWT179---182 Lifting Capacities, 23,500 lb CTWT183---188 Lifting Capacities, 26,500 lb CTWT189---196 Lifting Capacities, 29,500 lb CTWT197---204 Lifting Capacities, 32,500 lb CTWT205---212 Lifting Capacities, 39,500 lb CTWT

    Tab 3 Fully Retracted Outriggers213---214 Lifting Capacities, 2,500 lb CTWT215---216 Lifting Capacities, 5,500 lb CTWT217---218 Lifting Capacities, 8,500 lb CTWT219---220 Lifting Capacities, 11,500 lb CTWT

    Tab 4 On Tires221---222 Lifting Capacities, 0 lb CTWT223---224 Lifting Capacities, 2,500 lb CTWT225---226 Lifting Capacities, 5,500 lb CTWT227---228 Lifting Capacities, 8,500 lb CTWT229---230 Lifting Capacities, 11,500 lb CTWT231---232 Lifting Capacities, 14,500 lb CTWT233---234 Lifting Capacities, 17,500 lb CTWT235---236 Lifting Capacities, 20,500 lb CTWT237---238 Lifting Capacities, 23,500 lb CTWT239---240 Lifting Capacities, 26,500 lb CTWT241---242 Lifting Capacities, 29,500 lb CTWT243---244 Lifting Capacities, 32,500 lb CTWT

    View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com

  • For sa

    les us

    e only

    Not for crane operations

    N3P01383 of 244HTC---8690

    WARNINGREAD AND UNDERSTAND THE OPERATORS AND SAFETY MANUALS AND THE

    FOLLOWING INSTRUCTIONS AND RATED LIFTING CAPACITIES BEFORE OPERATING

    THE CRANE. OPERATION WHICH DOES NOT FOLLOW THESE INSTRUCTIONS MAY

    RESULT IN AN ACCIDENT.

    Operating InstructionsGeneral:1. Rated lifting capacities in pounds as shown on lift

    charts pertain to this crane as originallymanufactured and normally equipped.Modifications to the crane or use of optionalequipment other than that specified can result in a

    reduction in capacity.2. Construction equipment can be dangerous if

    improperly operated or maintained. Operation and

    maintenance of this crane must be in compliancewith the information in the Operator’s, Parts, andSafety Manuals supplied with this crane. If these

    manuals are missing, order replacements throughthe distributor.

    3. The operator and other personnel associated with

    this crane shall read and fully understand the latestapplicable American National Standards ASME

    B30.5 safety standards for cranes.4. The rated lifting capacities are based on crane

    standing level on firm supporting surface.

    Set Up:1. The crane shall be leveled on a firm supporting

    surface. Depending on the nature of the supporting

    surface, it may be necessary to have structuralsupports under the outrigger pontoons or tires tospread the load to a larger bearing surface.

    2. When making lifts on outriggers, all tires must befree of supporting surface. All outrigger beamsmust be extended to the same length; fully

    retracted, intermediate extended, or fully extended.The front bumper outrigger must be properly

    extended.3. When making lifts on tires, they must be inflated to

    the recommended pressure. (See Tire Inflation.)

    4. When on tires or retracted outriggers, with counter-weight combinations of 20,500 lb or less, maintain40û boom angle with fully retracted boom beforeswinging to over side position. Do not swing to overside position with counterweight combinations over

    20,500 lb unless boom angle is less than maximumboom angle shown on Backward Stability chart.When on tires, do not swing to over side position with

    counterweight combinations 32,500 lb and 39,500lb.

    5. For required parts of line, see Wire Rope Capacity

    Chart and Winch Performance.6. Before setting up the crane, refer to Allowable

    Crane Configuration and rated lifting capacities todetermine allowable crane configurations.

    Operation:1. Rated lifting capacities at rated radius shall not be

    exceeded. Do not tip the crane to determineallowable loads.

    2. Rated lifting capacities shall be reduced for

    repetitive lift applications. For concrete bucketoperation, weight of bucket and load shall not

    exceed 80% of rated load. For duty cycleoperation, such as loading and unloading,maximum allowable load shall not exceed 70% of

    rated load. For clamshell and magnet operation,weight of bucket, or magnet, and load shall notexceed 70% of rated load. Lifts with fly erected are

    prohibited for clamshell and magnet operation.3. Rated lifting capacities shown on fully extended

    outriggers do not exceed 85% of the tipping loads.Rated lifting capacities shown on intermediateextended or fully retracted outriggers aredetermined by the formula, rated load = (tippingload --- 0.1 X load factor)/1.25. Rated liftingcapacities shown on tires do not exceed 75% of thetipping loads. Tipping loads are determined bySAE crane stability test code J---765.

    4. Rated lifting capacities in the shaded areas arebased on structural strength or hydrauliclimitations and have been tested to meetminimum requirements of SAE J---1063cantilevered boom crane structures --- methodof test. Rated lifting capacities in non---shadedareas are based on stability ratings.

    5. Rated lifting capacities include the weight of thehook block, hook ball, slings, bucket, magnet,auxiliary lifting devices, etc. Their weights must besubtracted from the listed rated capacity to obtainthe net load which can be lifted. Rated liftingcapacities include the deduct for either fly stowedon the base of the boom. For deducts of any flyerected, but not used, see Capacity Deductions.

    6. Rated lifting capacities are based on freelysuspended loads. No attempt shall be made to

    move a load horizontally on the ground in anydirection.

    7. Rated lifting capacities are for lift crane service only.8. Do not operate at radii or boom lengths (minimum

    or maximum) where capacities are not listed. At

    these positions, the crane can tip or cause boomfailure.

    9. The maximum loads which can be telescoped are

    not definable because of variation in loadings andcrane maintenance, but it is permissible to attempt

    retraction and extension within the limits of theapplicable load rating chart.

    View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com

  • For sa

    les us

    e only

    Not for crane operations

    N3P0138 4 of 244 HTC---8690

    10. Boom extend mode EM5 is a fixed boom length

    load rating chart. Rated lifting capacities are basedon sections pinned together. When in EM5, do not

    attempt to extend or retract loads greater than10,000 lb unless sections are pinned.

    11. For main boom capacities when either boom length

    or radius, or both are between values listed,proceed as follows:a. For boom lengths not listed, use rating for next

    longer boom length or next shorter boomlength, whichever is smaller.

    b. For load radii not listed, use rating for next larg-er radius.

    12. The user shall operate at reduced ratings to allow

    for adverse job conditions such as: soft or unevenground, out of level conditions, wind, side loads,pendulum action, jerking or sudden stopping of

    loads, hazardous conditions, experience ofpersonnel, traveling with loads, electrical wires, etc.

    Side load on boom or fly is dangerous and shall beavoided.

    13. Rated lifting capacities do not account for the

    effects of wind on a suspended load or boom.Lifting capacities should be considered acceptablefor wind speeds up to 20 mph and appropriately

    reduced for wind speeds greater than 20 mph. (SeeWind Speed Restrictions.)

    14. For cold weather operation, rated capacities shouldbe reduced by the following rule: a 1% reduction inrated capacity should be taken for each 1_F below

    0_F. Example: if the temperature is ---10_F a 10%reduction in rated capacities should be taken, at---40_F a 40% reduction.

    15. For auxiliary lifting sheave capacities, use mainboom charts minus auxiliary lifting sheave deduct.

    (See Capacity Deductions.) The effective length ofthe boom increases by 2 ft.

    16. Rated lifting capacities are based on correct

    reeving. Deduction must be made for excessivereeving. Any reeving over minimum required isconsidered excessive and must be accounted for

    when making lifts. Use Working Range Diagram toestimate the extra feet of rope, then deduct the

    required rope weight (listed on the Wire RopeCapactiy Chart) for each extra foot of wire ropebefore attempting to lift a load.

    17. The loaded boom angle combined with the boomlength give only an approximation of the operating

    radius. The boom angle, before loading, should begreater to account for deflection. Some capacitiesare limited by a maximum obtainable 80_ boom

    angle. For main boom capacities, the loaded boomangle is for reference only. For fly capacities, theload radius is for reference only.

    18. For fly capacities with main boom length less than

    fully extended, the rated capacities are determinedby the boom angle. For angles not shown use the

    next lower boom angle to determine the ratedcapacity.

    19. The 38 ft boom length structural lifting capacities

    are based on boom fully retracted. If the boom isnot fully retracted, do not exceed capacities shownfor the 50 ft boom length.

    20. Rated lifting capacities on tires depend on tirecapacity, condition of tires, and tire air pressure. On

    tire capacities require lifting from main boom headonly on a smooth and level surface. The boom mustbe centered over the rear of the crane with two

    position travel swing lock engaged and the loadmust be restrained from swinging. Pick and carryoperations are restricted to maximum speed of 1

    mph. For correct tire pressure, see Tire Inflation.21. When operating with the 3,000 lb pin---on

    counterweight, use the rated lifting capacities for2,500 lb counterweight.

    Definitions:1. Loaded Boom Angle In Degrees: (

    The angle

    between the boom base section and horizontal with

    freely suspended load at the rated radius.2. Load Radius: Horizontal distance from a projection

    of the axis of rotation to the supporting surface,

    before loading, to the center of the vertical hoist lineor tackle with load applied.

    3. Working Area: Area measured in a circular arc

    about the centerline of rotation as shown on theWorking Areas Diagram.

    4. Freely Suspended Load: Load hanging free with nodirect external force applied except by the hoist line.

    5. Side Load: Horizontal side force applied to the

    lifted load either on the ground or in the air.6. No Load Stability Limit: The radius or boom angle

    beyond which it is not permitted to position the

    boom because the crane can overturn without anyload on the hook.

    7. Load Factor: Load applied at the boom tip whichgives the same moment effect as the boom mass.

    Patents:1. This crane is covered by one or more of the

    following patents:

    6,131,750 6,357,773

    6,499,612 6,601,719

    View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com

  • For sa

    les us

    e only

    Not for crane operations

    N3P01385 of 244HTC---8690

    General Dimensions

    10’ 11”(3.33m)

    7”(17.78cm)

    17û

    7’ 0”(2.13m)

    38’ 0”(11.58m)

    45’ 7”(13.89m)

    CL Of Rotation

    9’ 6”(2.90m)

    11’ 0”(3.35m)

    14’ 8”(4.47m)

    10.75”(0.27m)Ground

    Clearance

    5’ 9”(1.75m)

    34”(0.86m)

    16û

    6’ 2.50”(1.89m)

    11’ 6.50”(3.52m)

    5’ 0”(1.52m)

    4’ 2”(1.27m)

    8’ 0.50”(2.44m)

    4.50”(114mm)

    5’ 1”(1.55m)

    7’ 9” (2.36m)Fully Retracted

    9’ 8” (2.95m)Fully Retracted

    14’ 7” (4.45m)Intermediate Extended

    16’ 7” (5.05m)Intermediate Extended

    24’ 0” (7.32m)Fully Extended

    26’ 0” (7.92m)Fully Extended

    22.75”(0.58m)

    Ground LevelWith CraneOn Outriggers

    8.50”(0.22m)

    14.25”(0.36m)

    14.25”(0.36m)

    13’---8” (4.17m) Tailswing

    8’ 6” (2.60m)Overall Width

    5’ 1.50”(1.56m)

    Tire InflationTire Size Operation Tire Pressure (psi)

    12 R 22.51 mph

    Stationary120120

    Pontoon LoadingsMaximum Pontoon Load (lb) Maximum Pontoon Ground Bearing Pressure (psi)

    Front --- 97,400 199

    Rear --- 106,000 217

    Bumper --- 51,000 262

    View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com

  • For sa

    les us

    e only

    Not for crane operations

    N3P0138 6 of 244 HTC---8690

    Boom Extend Modes

    BoomLength

    Boom Telescope Length (ft)Length

    (ft) T4 T3 T2 T1 38 ft (11.6m)50 12.0

    38 ft (11.6m)

    60 22.0 Extend Base70 24.2 7.8

    Extend Base

    80 24.2 17.8140 ft (42 7m)90 24.2 25.1 2.7 140 ft (42.7m)

    100 24.2 25.1 12.7 BaseT4 T3 T2 T1110 24.2 25.1 22.7

    BaseT4 T3 T2 T1

    120 24.2 25.1 25.9 6.8

    130 24.2 25.1 25.9 16.8

    140 24.2 25.1 25.9 26.8

    BoomLength

    Boom Telescope Length (ft)

    38 ft (11 6 )Length

    (ft) T4 T3 T2 T138 ft (11.6m)

    50 11.5 0.5 Extend Base60 11.5 10.5

    Extend Base

    70 11.5 20.5127 3 ft (38 8 )80 11.5 25.1 5.4 127.3 ft (38.8m)

    90 11.5 25.1 15.4 BaseT4 T3 T2 T1100 11.5 25.1 25.4

    BaseT4 T3 T2 T1

    110 11.5 25.1 25.9 9.5

    120 11.5 25.1 25.9 19.5

    127.3 11.5 25.1 25.9 26.8

    BoomLength

    Boom Telescope Length (ft)38 ft (11 6m)Length

    (ft) T4 T3 T2 T1

    E d B

    38 ft (11.6m)

    50 12.0 Extend Base

    60 22.0

    70 25.1 6.9 115.8 ft (35.3m)80 25.1 16.9

    115.8 ft (35.3m)

    90 25.1 25.9 1.0 BaseT3 T2 T1100 25.1 25.9 11.0

    BaseT3 T2 T1

    115.8 25.1 25.9 26.8

    BoomLength

    Boom Telescope Length (ft)38 ft (11.6m)Length

    (ft) T4 T3 T2 T1Extend Base

    38 ft (11.6m)

    50 11.5 0.5Extend Base

    60 11.5 10.5102 ft (31 1m)

    70 11.5 12.7 7.8102 ft (31.1m)

    80 11.5 12.7 13.0 4.8T4 T3 BaseT2 T1

    90 11.5 12.7 13.0 14.8T4 T3 BaseT2 T1

    102 11.5 12.7 13.0 26.8

    BoomLength

    Boom Fixed Length (ft) 38 ft (11.6m)Length

    (ft) T4 T3 T2 T1 Extend Base

    50.7 12.7 76.5 ft (23.3m)

    63.7 12.7 13.0BaseT3 T2 T1

    ( )

    76.5 12.7 13.0 12.8

    BaseT3 T2 T1

    View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com

  • For sa

    les us

    e only

    Not for crane operations

    N3P01387 of 244HTC---8690

    Boom Mode Performance --- General Reference GuideShaded areas reflect maximum capacity at radius, based on boom modes and boom lengths.

    11,500 (lb) Counterweight 32,500 (lb) Counterweight

    Rad (ft) Boom Length (ft) Rad (ft) Boom Length (ft)

    50 50.7 50 50.7

    10 10

    30 30

    40 40

    60 63.7 60 63.7

    10 10

    30 30

    50 50

    70 70

    10 10

    30 30

    50 50

    60 60

    80 76.5 80 76.5

    12 12

    30 30

    50 50

    70 70

    90 90

    15 15

    40 40

    60 60

    80 80

    100 102 100 102

    20 20

    40 40

    60 60

    80 80

    90 90

    110 115.8 110 115.8

    20 20

    40 40

    60 60

    80 80

    100 100

    120 120

    25 25

    50 50

    70 70

    90 90

    110 110

    130 127.3 130 127.3

    25 25

    50 50

    70 70

    90 90

    120 120

    View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com

  • For sa

    les us

    e only

    Not for crane operations

    N3P0138 8 of 244 HTC---8690

    Winch PerformanceWinch Line Pulls

    Drum Rope Capacity (ft)Wire Rope Two Speed Winch

    Drum Rope Capacity (ft)Wire Rope

    Layer Low Speed High Speed

    Available (lb*) Available (lb) Layer Total

    1 16,880 7,595 114 114

    2 15,519 6,982 124 238

    3 14,362 6,461 134 372

    4 13,365 6,013 144 516

    5 12,497 5,623 154 670

    6 N/A N/A 164 834

    *Maximum lifting capacity: Type RB Rope=12,920 lb Type ZB Rope=15,600 lb

    Wire Rope Capacity ChartMaximum Lifting Capacities Based On Wire Rope Strength

    Partsof

    3/4” 3/4”Notesof

    Line Type RB Type ZBNotes

    1 12,920 15,600 S Capacities shown are in pounds and workingl d t t d th ti th2 25,840 31,200

    p p gloads must not exceed the ratings on thecapacity charts in the Crane Rating Manual

    3 38,760 46,800capacity charts in the Crane Rating Manual.

    S Capacity deducts for auxiliary lifting devices4 51,680 62,400

    S Capacity deducts for auxiliary lifting devicesdo not apply for wire rope strength capacities.

    5 64,600 78,000do not apply for wire rope strength capacities.

    S Capacities over 129,200 lb require special6 77,520 93,600

    S Capacities over 129,200 lb require specialreeving and/or higher strength rope.

    7 90,440 109,200

    g / g g p

    S Study Operator’s Manual for wire ropei ti d i l t f li8 103,360 124,800

    y p pinspection procedures, single part of lineapplications and reeving diagrams

    9 116,280 140,400applications, and reeving diagrams.

    10 129,200 156,000

    11 142,120 171,600

    12 155,040 187,200

    Rope Weight---Pounds Per Foot 1.2 1.3

    LBCE Description

    Type RB18 X 19 Rotation Resistant --- Compacted Strand --- High Strength Preformed,Right Regular Lay

    Type ZB 36 X 7 Non---Rotating --- Extra Improved Plow Steel --- Right Regular Lay

    Hydraulic Circuit Pressure SettingsFunction Pressure (psi)

    Front And Rear Winch 3,500

    Outriggers 3,000

    Boom Hoist 4,300

    Telescope 4,300

    Swing 2,000

    Steering 2,000

    Bumper Outrigger 675

    Pilot Control 475

    View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com

  • For sa

    les us

    e only

    Not for crane operations

    N3P01389 of 244HTC---8690

    Working Areas

    Center OfRotation

    Note: These Lines Determine The Limiting Position Of Any Load For Operation Within Working Areas Indicated.

    LongitudinalC of HTCL

    LongitudinalC of HTCL

    HTC On Tires

    Boom Centered Over Rear

    Center OfRotation

    HTC On Outriggers

    C BoomL

    C Rear AxleL

    Side

    Side

    Rear

    360_Chart

    C Front AxleL

    Front

    C OutriggerPontoon

    L

    See Note

    See Note

    Capacity DeductionsLoad Handling Equipment Weight (lb)

    40 Ton Quick Reeve 4 Sheave Hook Block (See Hook Block For Actual Weight) 900

    60 Ton Quick Reeve 4 Sheave Hook Block (See Hook Block For Actual Weight) 1,100

    90 Ton Quick Reeve 6 Sheave Hook Block (See Hook Block For Actual Weight) 1,554

    8.5 Ton Hook Ball (See Hook Ball For Actual Weight) 360

    Auxiliary Lifting Devices Weight (lb)

    Auxiliary Head Attached 100

    Lifting From Main Boom With:

    35 ft Or 58 ft Fly Stowed On Boom Base (See Operation Note 5) 0

    35 ft Offset Fly Erected But Not Used 8,300

    58 ft Offset Fly Erected But Not Used 17,900

    74 ft or 90 ft Offset Fly Erected But Not Used Prohibited

    16 ft Fly Extension Erected But Not Used 2,900

    Lifting From 35 ft Offset Fly With:

    23 ft Fly Tip Erected But Not Used Prohibited

    23 ft Fly Tip Stowed On 35 ft Offset Fly Prohibited

    Note: Capacity deductions are for Link-Belt supplied equipment only.

    View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com

  • For sa

    les us

    e only

    Not for crane operations

    N3P0138 10 of 244 HTC---8690

    Allowable Crane Configuration --- Main Boom

    Boom Length (ft)

    Outrigger Position Counterweight (lb)

    0

    2,500

    5,500

    8,500

    11,500

    14,500

    Full 17,500 38---140 38---127.3 38---115.8 38---102 38---76.5Full20,500

    38 140 38 127.3 38 115.8 38 102 38 76.5

    23,500

    26,500

    29,500

    32,500

    39,500

    0 38---110 38---100 38---90 38---90

    2,500 38---120 38---100 38---100

    Intermediate 5,500 38---120 38---110 38---10038 102

    38---76.5Intermediate8,500 38---130 38---120

    38 115 8

    38---10238 76.5

    11,500 --- 39,500 38---140 38---127.338---115.8

    0

    2,500 38---80

    Retracted5,500 38---90

    Not AllowedRetracted8,500 38---100

    Not Allowed

    11,500 38---100

    14,500---39,500

    0---2,500 38---80

    On Tires 5,500---32,500 38---100 Not AllowedOn Tires39,500

    Not Allowed

    On tire capacities are based on over the rear position only, outrigger capacities are based on 360û rotation.

    Wind Speed RestrictionsIf The Speed Is: Rated Lifted Capacities Must Be Reduced By At Least:

    0---20 mph Normal Lifting Operations (See Capacity Charts)

    21---29 mph 40%

    30---39 mph 70%

    40 mph or Greater Crane operation must be shutdown and the boom retractedand lowered to horizontal.

    S Additional reductions are required for loads with large wind sail area.S These restrictions are based on crane on fully extended outriggers.S During high winds, the operator shall add 10_ to all minimum boom angles due to no load stability and

    shall not boom down below that angle.

    View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com

  • 15460 (supersedes 5424)---0506---N3

    HTC-8690Link-Belt Cranes

    Technical DataSpecifications & Capacities

    Telescopic Boom Truck Crane90 ton (81.6 metric ton)

    CAUTION: This material is supplied forreference use only. Operator must refer toin---cab Crane RatingManual andOperator’sManual to determine allowable crane liftingcapacities and assembly and operatingprocedures.

    View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com

  • 5460 (supersedes 5424)---0506---N3

    HTC-8690Link-Belt Cranes

    Table Of ContentsBoom, Attachments, and Upper Structure 1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Boom 1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Boom Wear Pads 1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Boom Head 1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Boom Elevation 1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Auxiliary Lifting Sheave --- Optional 1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Hook Blocks and Balls --- Optional 1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Fly --- Optional 1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Fly Extensions --- Optional 1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Upper Operator’s Cab and Controls 2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Swing 3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Electrical 3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Additional Equipment 3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Load Hoist System 3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Load Hoist Performance 3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2M Main and Optional Auxiliary Winches 3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Hydraulic System 4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Counterweight 4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Carrier 6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .General 6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Outriggers 6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Steering and Axles 6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Suspension 6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Tires and Wheels 6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Brakes 6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Electrical 6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Engine 6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Transmission 6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Carrier Speeds and Gradeability 7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Fuel Tank 7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Hydraulic System 7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Pump Drive 7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Lower Cab and Controls 8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Additional Equipment 8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Axle Loads 9. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Axle Loads with 2--Axle or 3--Axle Boom Dolly 10. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .General Dimensions 11. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Working Range Diagram 12. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Boom Extend Modes 13. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Main Boom Lift Capacity Charts -- Standard 14. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8,500 lb Counterweight --- Fully Extended Outriggers --- 360˚ Rotation 14. . . . . . . . . . . . . . . . . . . . . . . . . . . .8,500 lb Counterweight --- On Tires --- Stationary --- Boom Centered Over Rear 15. . . . . . . . . . . . . . . . . . . .8,500 lb Counterweight --- On Tires --- Pick & Carry (1 mph) --- Boom Centered Over Rear 15. . . . . . . . . .11,500 lb Counterweight --- Fully Extended Outriggers --- 360˚ Rotation 16. . . . . . . . . . . . . . . . . . . . . . . . . . .11,500 lb Counterweight --- On Tires --- Stationary --- Boom Centered Over Rear 17. . . . . . . . . . . . . . . . . . .11,500 lb Counterweight --- On Tires --- Pick & Carry (1 mph) --- Boom Centered Over Rear 17. . . . . . . . .

    View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com

  • 5460 (supersedes 5424)---0506---N3

    HTC---8690 Link---Belt Cranes

    Main Boom Lift Capacity Charts -- Optional 18. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32,500 lb Counterweight --- Fully Extended Outriggers --- 360˚ Rotation 18. . . . . . . . . . . . . . . . . . . . . . . . . . .32,500 lb Counterweight --- On Tires --- Stationary --- Boom Centered Over Rear 19. . . . . . . . . . . . . . . . . . .32,500 lb Counterweight --- On Tires --- Pick & Carry (1 mph) --- Boom Centered Over Rear 19. . . . . . . . .39,500 lb Counterweight --- Fully Extended Outriggers --- 360˚ Rotation 20. . . . . . . . . . . . . . . . . . . . . . . . . . .Fly Attachment Lift Capacity Charts -- Optional 21. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8,500 lb Counterweight --- Fully Extended Outriggers --- 360˚ Rotation 21. . . . . . . . . . . . . . . . . . . . . . . . . . . .140 ft Main Boom Length --- 2˚ Fly Offset 21. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .140 ft Main Boom Length --- 15˚ Fly Offset 21. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .140 ft Main Boom Length --- 30˚ Fly Offset 22. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .140 ft Main Boom Length --- 45˚ Fly Offset 22. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11,500 lb Counterweight --- Fully Extended Outriggers --- 360˚ Rotation 23. . . . . . . . . . . . . . . . . . . . . . . . . . .140 ft Main Boom Length --- 2˚ Fly Offset 23. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .140 ft Main Boom Length --- 15˚ Fly Offset 23. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .140 ft Main Boom Length --- 30˚ Fly Offset 24. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .140 ft Main Boom Length --- 45˚ Fly Offset 24. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32,500 lb Counterweight --- Fully Extended Outriggers --- 360˚ Rotation 25. . . . . . . . . . . . . . . . . . . . . . . . . . .140 ft Main Boom Length --- 2˚ Fly Offset 25. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .140 ft Main Boom Length --- 15˚ Fly Offset 25. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .140 ft Main Boom Length --- 30˚ Fly Offset 26. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .140 ft Main Boom Length --- 45˚ Fly Offset 26. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39,500 lb Counterweight --- Fully Extended Outriggers --- 360˚ Rotation 27. . . . . . . . . . . . . . . . . . . . . . . . . . .140 ft Main Boom Length --- 2˚ Fly Offset 27. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .140 ft Main Boom Length --- 15˚ Fly Offset 27. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .140 ft Main Boom Length --- 30˚ Fly Offset 28. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .140 ft Main Boom Length --- 45˚ Fly Offset 28. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

    Main Boom Lift Capacity Charts -- Optional (Metric) 29. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 856kg Counterweight --- Fully Extended Outriggers --- 360˚ Rotation 29. . . . . . . . . . . . . . . . . . . . . . . . . . . .3 856kg Counterweight --- On Tires --- Stationary --- Boom Centered Over Rear 30. . . . . . . . . . . . . . . . . . . .3 856kg Counterweight --- On Tires --- Pick & Carry (1.6 km/h) --- Boom Centered Over Rear 30. . . . . . . .5 216kg Counterweight --- Fully Extended Outriggers --- 360˚ Rotation 31. . . . . . . . . . . . . . . . . . . . . . . . . . . .5 216kg Counterweight --- On Tires --- Stationary --- Boom Centered Over Rear 32. . . . . . . . . . . . . . . . . . . .5 216kg Counterweight --- On Tires --- Pick & Carry (1.6 km/h) --- Boom Centered Over Rear 32. . . . . . . .14 742kg Counterweight --- Fully Extended Outriggers --- 360˚ Rotation 33. . . . . . . . . . . . . . . . . . . . . . . . . .14 742kg Counterweight --- On Tires --- Stationary --- Boom Centered Over Rear 34. . . . . . . . . . . . . . . . . . .14 742kg Counterweight --- On Tires --- Pick & Carry (1.6 km/h) --- Boom Centered Over Rear 34. . . . . . .17 917kg Counterweight --- Fully Extended Outriggers --- 360˚ Rotation 35. . . . . . . . . . . . . . . . . . . . . . . . . .Fly Attachment Lift Capacity Charts -- Optional (Metric) 36. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 856kg Counterweight --- Fully Extended Outriggers --- 360˚ Rotation 36. . . . . . . . . . . . . . . . . . . . . . . . . . . .42.67m Main Boom Length --- 2˚ Fly Offset 36. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42.67m Main Boom Length --- 15˚ Fly Offset 36. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42.67m Main Boom Length --- 30˚ Fly Offset 36. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42.67m Main Boom Length --- 45˚ Fly Offset 36. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 216kg Counterweight --- Fully Extended Outriggers --- 360˚ Rotation 37. . . . . . . . . . . . . . . . . . . . . . . . . . . .42.67m Main Boom Length --- 2˚ Fly Offset 37. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42.67m Main Boom Length --- 15˚ Fly Offset 37. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42.67m Main Boom Length --- 30˚ Fly Offset 37. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42.67m Main Boom Length --- 45˚ Fly Offset 37. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

    View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com

  • 5460 (supersedes 5424)---0506---N3

    HTC-8690Link-Belt Cranes

    14 742kg Counterweight --- Fully Extended Outriggers --- 360˚ Rotation 38. . . . . . . . . . . . . . . . . . . . . . . . . .42.67m Main Boom Length --- 2˚ Fly Offset 38. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42.67m Main Boom Length --- 15˚ Fly Offset 38. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42.67m Main Boom Length --- 30˚ Fly Offset 39. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42.67m Main Boom Length --- 45˚ Fly Offset 39. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17 917kg Counterweight --- Fully Extended Outriggers --- 360˚ Rotation 40. . . . . . . . . . . . . . . . . . . . . . . . . .42.67m Main Boom Length --- 2˚ Fly Offset 40. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42.67m Main Boom Length --- 15˚ Fly Offset 40. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42.67m Main Boom Length --- 30˚ Fly Offset 41. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42.67m Main Boom Length --- 45˚ Fly Offset 41. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

    View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com

  • 15460 (supersedes 5424)---0506---N3

    HTC-8690Link-Belt Cranes

    Boom, Attachments, and Upper StructureJ BoomDesign --- Five section, formed construction of extra hightensile steel consisting of one base section and four tele-scoping sections. The two plate design of each sectionhas multiple longitudinal bends for superior strength. Eachtelescoping section extends independently by means ofone double---acting, single stage hydraulic cylinder withintegrated holding valves.BoomS 38---140 ft (11.6 ---42.7m) five section boomS Integral boom dolly connectionS Five boom extend modes (EM1 through EM5), controlledfrom the operator’s cab, provide superior capacities byvarying the extension of the telescoping sections:S EM1 extends to 140.0 ft (42.7m)S EM2 extends to 127.3 ft (38.8m)S EM3 extends to 115.8 ft (35.3m)S EM4 extends to 102.0 ft (31.1m)S EM5 extends to 76.5 ft (23.3m)

    S Mechanical boom angle indicatorS Maximum tip height for each extend mode is:S EM1 is 148 ft (45.1m)S EM2 is 135 ft (41.1m)S EM3 is 124 ft (37.8m)S EM4 is 110 ft (33.5m)S EM5 is 84 ft (25.6m)Boom Wear PadsS Wear pads with Teflon inserts that self ---lubricate theboom sections

    S Bottom wear pads are universal for all boom sectionsS Top wear pads are universal for all boom sectionsBoom HeadS Five 16.5 in (41.9cm) root diameter nylon sheaves to han-dle up to ten parts of line

    S Easily removable wire rope guardsS Rope dead end lugs on each side of the boom headS Boom head is designed for quick---reeve of the hookblock

    Boom ElevationS One double acting hydraulic cylinder with integral hold-ing valve

    S Boom elevation: ---3˚ to 80˚Auxiliary Lifting Sheave --- OptionalS Single 16.5 in (41.9m) root diameter nylon sheaveS Easily removable wire rope guardsS Does not affect erection of the fly or use of the main headsheavesHook Blocks and Balls --- OptionalS 40 ton (36.3mt) 4 sheave quick---reeve hook block withsafety latch

    S 60 ton (54.4mt) 4 sheave quick---reeve hook block withsafety latch

    S 90 ton (81.6mt) 6 sheave quick---reeve hook block withsafety latch

    S 8.5 ton (7.7mt) swivel and non---swivel hook balls withsafety latch

    S 10 ton (9.1mt) swivel and non---swivel hook balls withsafety latchFly --- OptionalS 35 ft (10.7m) one piece lattice fly, stowable, offsettable to2˚, 15˚, 30˚, and 45˚. Maximum tip height is 182 ft(55.5m).

    S 35 ft---58 ft (10.7 ---17.7m) two piece bi---fold lattice fly,stowable, offsettable to 2˚, 15˚, 30˚, and 45˚. Maximumtip height is 205 ft (62.5m).Fly Extensions --- OptionalS One 16 ft (4.9m) lattice extension, equipped with two 16.5in (41.9cm) root diameter nylon sheaves, to be mountedbetween the boom head and fly options. Maximum tipheight is 221 ft (67.4m).

    S Two 16 ft (4.9m) lattice extensions, one equipped withtwo 16.5 in (41.9cm) root diameter nylon sheaves, to bemounted between the boom head and fly options. Maxi-mum tip height is 237 ft (72.2m). Minimum of 14,500 lb(6 577.1kg) of counterweight required.

    View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com

  • 2 5460 (supersedes 5424)---0506---N3

    HTC-8690 Link-Belt Cranes

    J Upper Operator’s Cab and ControlsEnvironmental Cab --- Fully enclosed, one person cab ofgalvaneal steel structure with acoustical insulation.Equipped with:S Tinted and tempered glass windowsS Extra---large fixed front window with windshield wiper andwasher

    S Swing up roof window with windshield wiperS Sliding left side door with large fixed windowS Sliding rear and right side windows for ventilationS Six way adjustable, cushioned seat with seat belt andstorage compartment

    S Engine dependent warm---water heater with air ducts forfront windshield defroster and cab floor

    S Defroster fan for the front windowS Bubble levelS Circulating fanS Adjustable sun visorS Dome lightS Cup holderS Fire extinguisherS Left side viewing mirrorS Pull ---out cabwalkS Two position travel swing lock

    Air Conditioning --- Optional --- Integral with cab heatingsystem utilizing the same ventilation outlets

    Armrest Controls --- Two dual axis hydraulic joystick con-trollers or optional single axis hydraulic controllers for:S SwingS Boom hoistS Main rear winchS Auxiliary front winch --- optionalS Drum rotation indicationS Drum rotation indicator activation switchS Winch high/low speed and disable switch(es)S Third wrap selector switch --- optionalS Counterweight handling switchS Telescopic override switchesS Warning horn button

    Outrigger Controls --- Hand held control box with umbilicalcord gives the operator the freedom to view operation whilesetting the outriggers.

    Foot ControlsS Boom telescopeS Swing brakeS Engine throttle

    Right Front Console --- Controls and indicators for:S Engine ignition S Heating controlsS Engine throttle lock S Console dimmer switchS Pump enable S Bubble levelS Function disable S 12 volt power connectionS Swing park brake S Air conditioning --- optionalS Front windshield wiper S Boom floodlight --- optionaland washer S Rotating beacon/Strobe

    S Cab floodlights light --- optionalS Warning hornCab Instrumentation --- Ergonomically positioned, analoginstrumentation for crane operation including:S Check and stop engine indicatorsS Engine coolant temperature with warning indicatorS Hydraulic oil temperature with warning indicatorS Low air pressure warning indicatorS Fuel level with warning indicatorS Tachometer

    Rated Capacity Limiter --- Microguard 540 color graphicaudio---visual warning system integrated into the dash withanti ---two block and function limiter. Operating data avail-able includes:S Crane configurationS Boom length and angleS Boom head heightS Allowed load and % of allowed loadS Boom angleS Radius of loadS Actual loadS Counterweight removalS Operator settable alarms (include):S Maximum and minimum boom anglesS Maximum and minimum tip heightS Maximum boom lengthS Left/right swing positionsS Operator defined area (imaginary plane)

    Integrated Third Wrap Indicator --- Optional --- Micro-guard color display visually and audibly warns the operatorwhen the wire rope is on the first/bottom layer and whenthe wire rope is down to the last three wraps.

    Internal RCL Light Bar --- Optional --- Visually informs theoperator when crane is approaching maximum load capac-ity with a series of green, yellow, and red lights.

    External RCL Light Bar --- Optional --- Visually informs theground crew when crane is approaching maximum loadcapacity with a series of green, yellow, and red lights.

    View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com

  • 35460 (supersedes 5424)---0506---N3

    HTC-8690Link-Belt Cranes

    J SwingMotor/Planetary --- Bi ---directional hydraulic swing motormounted to a planetary reducer for 360˚ continuoussmooth swing at 1.7 rpm.

    Swing Park Brake --- 360˚, electric over hydraulic, (springapplied/hydraulic released) multi ---disc brake mounted onthe speed reducer. Operated by a switch from the opera-tor’s cab.

    Swing Brake --- 360˚, foot operated, hydraulic applied discbrake mounted to the speed reducer.

    Swing Lock --- Two---position swing lock (boom over frontor rear) operated from the operator’s cab.

    360˚ Positive Swing Lock --- Optional --- Meets New YorkCity requirement.

    J ElectricalSwing Alarm --- Audio warning device signals when theupper is swinging.

    LightsS Two working lights on front of the cabS One rotating amber beacon on top of the cab --- optionalS One amber strobe beacon on top of the cab --- optionalS Boom floodlight --- optional

    J Additional EquipmentS Left side aluminum storage box

    J Load Hoist SystemLoad Hoist Performance

    Main (Rear) and Auxiliary (Front) Winches --- 3/4 in (19mm) RopeMaximum Line Pull Normal Line Speed High Line Speed Layer Total

    Layer lb kg ft/min m/min ft/min m/min ft m ft m1 16,880 7 656.6 179 54.6 356 108.5 114 34.7 114 34.72 15,519 7 039.3 195 59.4 387 118.0 124 37.8 238 72.53 14,362 6 514.5 211 64.3 418 127.4 134 40.8 372 113.44 13,365 6 062.3 226 68.9 449 136.9 144 43.9 516 157.35 12,497 5 668.5 242 73.8 480 146.3 154 46.9 670 204.26 --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 164 50.0 834 254.2

    Wire Rope ApplicationDiameter

    TypeMaximum

    Permissible Loadin mm lb kg

    Main (Rear) WinchStandard 3/4 19 18x19 rotation resistant --- right regular lay (Type RB) 12,920 5 860.5Optional 3/4 19 36x7 rotation resistant --- right regular lay (Type ZB) 15,600 7 076.2

    Auxiliary (Front) WinchStandard 3/4 19 18x19 rotation resistant --- right regular lay (Type RB) 12,920 5 860.5Optional 3/4 19 36x7 rotation resistant --- right regular lay (Type ZB) 15,600 7 076.2

    2M Main and Optional Auxiliary WinchesS Axial piston, full and half displacement (2---speed) motorsdriven through planetary reduction unit for positive con-trol under all load conditions.

    S Grooved laggingS Power up/down mode of operationS Hoist drum cable follower --- optional

    S Drum rotation indicatorS Drum diameter: 16 in (40.6cm)S Rope length:S Main: 730 ft (222.5m)S Auxiliary: 600 ft (182.9m) or 730 ft (222.5m)

    S Maximum rope storage: 834 ft (254.2m)S Terminator style socket and wedgeThird wrap indicator --- optional --- Visually and audiblywarns the operator when the wire rope is on the bottomlayer and when the wire rope is down to the last threewraps.

    View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com

  • 4 5460 (supersedes 5424)---0506---N3

    HTC-8690 Link-Belt Cranes

    J Hydraulic SystemAll circuits of the hydraulic system are pressure compen-sated.

    Counterbalance Valves --- All hoist motors, boom extendcylinders, and boom hoist cylinders are equipped withcounterbalance valves to provide load lowering and to pre-vent accidental load drop if hydraulic power is suddenlyreduced.

    Hydraulic Oil Coolers --- Two carrier mounted coolers re-move heat from the hydraulic oil. One is integral to the en-gine radiator/charge air cooler and the other is mounted inleft side access ladder.

    Boom Hoist Float Valves (Optional) --- For transportingthe boom over the rear of the crane with a boom dolly. Al-lows hydraulic oil within the boom hoist cylinder to flowbetween piston side and case side, allowing the boom tofloat while on the boom dolly.

    Swing Brake Release --- For transporting the boom overthe rear of the crane with a boom dolly. Holds the 360ºswing park brake in the released position allowing freerotation of the upper structure.

    J CounterweightStandard --- Total of 11,500 lb (5 216kg) of total counter-weight consisting of three, hydraulically removable counter-weights. Assembled and disassembled by hydraulic cylin-ders controlled from the operator’s cab with capacities for:S 0 lb (0kg) counterweightS 2,500 lb (1 134.0kg) counterweightS 5,500 lb (2 494.8kg) counterweightS 8,500 lb (3 855.5kg) counterweightS 11,500 lb (5 216.3kg) counterweightOptional --- 15,000 lb (6 803.9kg) in addition to standardcounterweight for a total of 26,500 lb (12 020.2kg) withadditional capacities for:S 14,500 lb (6 577.1kg) counterweightS 20,500 lb (9 298.6kg) counterweightS 23,500 lb (10 659.4kg) counterweightS 26,500 lb (12 020.2kg) counterweightOptional --- 21,000 lb (9 525.4kg) in addition to standardcounterweight for a total of 32,500 lb (14 741.8kg) withadditional capacities for:S 14,500 lb (6 577.1kg) counterweightS 17,500 lb (7 937.9kg) counterweightS 20,500 lb (9 298.6kg) counterweightS 23,500 lb (10 659.4kg) counterweightS 26,500 lb (12 020.2kg) counterweightS 29,500 lb (13 381.0kg) counterweightS 32,500 lb (14 741.8kg) counterweightOptional --- 28,000 lb (12 700.6kg) in addition to stan-dard counterweight for a total of 39,500 lb (17 916.9kg)with additional capacities for:S 14,500 lb (6 577.1kg) counterweightS 17,500 lb (7 937.9kg) counterweightS 20,500 lb (9 298.6kg) counterweightS 23,500 lb (10 659.4kg) counterweightS 26,500 lb (12 020.2kg) counterweightS 29,500 lb (13 381.0kg) counterweightS 32,500 lb (14 741.8kg) counterweightS 39,500 lb (17 916.9kg) counterweight*Low speed jobsite travel is offered for these optional counter-weight configurations and a boom dolly or boom trailer maybe required for on ---highway travel.

    * Overall width of the crane increases to 11 ft (3.4m) forthis counterweight configuration

    View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com

  • 55460 (supersedes 5424)---0506---N3

    HTC-8690Link-Belt Cranes

    11,500 lb (5 216.3kg) 26,500 lb (12 020.2kg)

    32,500 lb (14 741.8kg) 39,500 lb (17 916.9kg)

    2,500 lb(1 134.0kg)Tray

    6,000 lb(2 721.6kg)Piece

    3,000 lb(1 360.8kg)Top 3,000 lb

    (1 360.8kg)Piece

    12,000 lb(5 443.1kg)Piece

    7,000 lb(3 175.2kg)2---Pieces

    2,500 lb(1 134.0kg)Tray

    6,000 lb(2 721.6kg)Piece

    3,000 lb(1 360.8kg)Top

    3,000 lb(1 360.8kg)Piece

    12,000 lb(5 443.1kg)Piece

    2,500 lb(1 134.0kg)Tray

    6,000 lb(2 721.6kg)Piece

    3,000 lb(1 360.8kg)Top

    6,000 lb(2 721.6kg)Piece

    2,500 lb(1 134.0kg)Tray

    6,000 lb(2 721.6kg)Piece

    3,000 lb(1 360.8kg)Top

    3,000 lb(1 360.8kg)Piece

    12,000 lb(5 443.1kg)Piece

    6,000 lb(2 721.6kg)Piece

    CounterweightPackages

    11,500 lb (5 216.3kg) --- Standard

    26,500 (12 020.2kg) --- Optional

    32,500 (14 741.8kg) --- Optional

    39,500 (17 916.9kg) --- Optional

    CounterweightModules

    2,500 lb(1 134.0kg)Tray

    6,000 lb(2 721.6kg)Piece

    3,000 lb(1 360.8kg)Top

    3,000 lb(1 360.8kg)Piece

    12,000 lb(5 443.1kg)Piece

    6,000 lb(2 721.6kg)Piece

    7,000 lb(3 175.2kg)2---Pieces

    CounterweightUsage

    Configurations

    0 lb(0kg)

    2,500 lb(1 134.0kg) X5,500 lb(2 494.8kg) X X8,500 lb(3 855.5kg) X X11,500 lb(5 216.3kg) X X X14,500 lb(6 577.1kg) X X X X17,500 lb(7 937.9kg) X X X X20,500 lb(9 298.6kg) X X X X X23,500 lb(10 659.4kg) X X X X26,500

    (12 020.2kg) X X X X X29,500 lb(13 381.0kg) X X X X X32,500

    (14 741.8kg) X X X X X X39,500

    (17 916.9kg) X X X X X X X

    View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com

  • 6 5460 (supersedes 5424)---0506---N3

    HTC-8690 Link-Belt Cranes

    CarrierJ GeneralS 8 ft 6 in (2.6 m) wideS 23 ft 10 in (7.26m) wheelbase (centerline of first axle tocenterline of fourth axle)

    S Frame --- Box---type, torsion resistant, welded construc-tion made of high tensile steel. Equipped with front andrear towing and tie---down lugs, tow connections, andaccess ladders.

    J OutriggersBoxes --- Two double box, front and rear welded to the car-rier frame

    Beams and Jacks --- Four dual stage beams with ConfinedArea Lifting Capacities (CALC) provide selectable outriggerextensions of full, intermediate, and retracted positions.Jacks with integral check valves, hydraulically controlledfrom the operator’s cab and on both sides of carrier. A fifthfront bumper outrigger with integral check valves is hydrau-lically controlled from the operator’s cab and at the frontbumper of carrier.

    Pontoons --- Four lightweight, stow’n go, 23.5” x 27.25”(59.7 x 69.2cm) hexagonal steel pontoons with a contactarea of 485 in2 (3 129cm2) can be stored for road travel ineither the storage racks on the carrier or under the outrig-ger boxes.

    Main Jack Reaction --- 106,000 lb (48 080.8kg) force and217 psi (1 496.2kPa) ground bearing pressure

    J Steering and AxlesS Sheppard full integral master gear/slave gear steeringsystem provides hydraulic assisted steering with me-chanical link between steering wheel and wheels

    S Drive --- 8 x 4 for on/off ---highway travelS Axle 1 & 2 --- Tandem steered, non---drivenS Axle 3 & 4 --- Tandem non---steered, driven with reduc-tion: 5.38 to 1

    S Inter---Axle Differential Lock --- Traction adding devicethat locks axle 3 with axle 4. Operated by a switch fromthe carrier cab.

    J SuspensionFront --- Raydan Air Link walking beam air suspension

    Rear --- Raydan Air Link walking beam air suspensionS Axle Lift System --- Optional --- Improves rear tireground clearance when the crane is up on outriggers.The rear tandem axles are raised and lowered with aswitch in the carrier cab. The axle lift system can be con-trolled with a switch on both sides of the carrier.

    J Tires and WheelsFront --- Four (single) 445/65R22.5 tires on aluminum discwheels

    Rear --- Eight (dual) 12R22.5 tires on aluminum disc wheelsS Spare tires and wheels --- optionalS Tire inflation kit --- optional

    J BrakesService --- Full air anti ---lock (ABS) brakes on all wheelends. Dual circuit compressed air system with air dryer.

    Parking/Emergency --- Spring loaded type, acting on 3rdand 4th axles automatically apply when air pressure dropsbelow 40 psi (275.8kPa) in both circuits.

    J ElectricalBattery --- Three batteries provide 12 volt starting and op-eration

    LightsS Front lighting includes two main headlights, two highbeam lights, two parking/directional indicators, and threecab marker lights.

    S Side lighting includes three parking/directional indicatorsper side.

    S Rear lighting includes two parking/directional indicators,two parking/brake lights, two reverse lights, three markerlights, and a license plate light.

    S Other equipment includes hazard/warning system, cablight, instrument panel light, and signal horn.

    S One amber strobe beacon on top of the cab --- optionalS Daytime running lights --- optional

    J EngineSpecification Detroit Diesel Series 60

    Numbers of cylinders 6Cycle 4Bore and Stroke: inch (mm) 5.12 x 6.30 (130x160)Piston Displacement: in3 (L) 778 (12.7)

    Max. Brake Horsepower: hp (kW) 445 (331.8) @ 1,800 rpm430 (320.7) @ 2,100 rpmPeak Torque: ft lb (J) 1,450 (1 966.1) @ 1,200 rpmAlternator: volts --- amps 12 --- 130Crankcase Capacity: qt (L) 32 (30.3)S Cruise controlS Three---stage engine compression brakeS Thermostatically controlled, hydraulically driven radiator fanS 120 volt engine block heaterS Ether injection system --- optional

    J TransmissionAutomated --- ZF AS---TRONIC (no clutch pedal) manualtransmission with 12 forward gears and 2 reverse gears.

    View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com

  • 75460 (supersedes 5424)---0506---N3

    HTC-8690Link-Belt Cranes

    J Carrier Speeds and Gradeability

    ZF Astronic Governed SpeedGradeability(@ Peak Torque

    Except Creep @ Idle)

    Gear Ratio mph km/h % Grade

    12th 0.778 62.3 100.3 2.1

    11th 1.000 48.5 78.1 3.1

    10th 1.267 38.3 61.6 4.2

    9th 1.629 29.8 48.0 5.8

    8th 2.101 23.1 37.2 7.8

    7th 2.700 18.0 29.0 10.2

    6th 3.552 13.7 22.0 13.7

    5th 4.565 10.6 17.1 17.8

    4th 5.784 8.4 13.5 22.8

    3rd 7.435 6.5 10.5 29.5

    2nd 9.590 5.1 8.2 38.2

    1st 12.326 3.9 6.3 49.3

    Reverse (Low) 11.413 4.3 6.9 45.6

    Reverse (High) 8.880 5.5 8.9 35.3

    1st @ 700 rpm 12.326 1.3 2.1 20.9

    Rev. (Low) @ 700 rpm 11.413 1.4 2.3 19.3

    Rev. (High) @ 700 rpm 8.880 1.8 2.9 14.9

    Based on a gross vehicle weight of 95,000 lb (43 091.3kg)

    J Fuel TankOne 95 gal (359.6L) capacity tank

    J Hydraulic SystemAll functions are hydraulically powered allowing positive,precise control with independent or simultaneous operationof all functions.

    Main PumpsS Three fixed displacement gear pumps with automaticdisconnect for the main and auxiliary winches, swing,boom hoist, control circuit, and telescope for use whenpick & carry switch is in travel mode.

    S One fixed displacement gear pump for steering and thefront bumper outrigger

    S Two fixed displacement gear pumps for engine coolingfan and main outriggers. These pumps also provide flowto the winches and boom hoist for “pick & carry” mode.Operated by a switch in the carrier cab.

    S Combined pump capacity of 188 gpm (711.7Lpm)

    Hydraulic Reservoir --- 144 gal (545.1L) capacity equippedwith sight level gauge. Diffusers built in for deaeration.

    Filtration --- One 10 micron, full flow, return line filter. All oilis filtered prior to return to reservoir. Accessible for easyfilter replacement.

    J Pump DriveAll pumps are mechanically driven by the diesel engine.Main and auxiliary winches, swing, boom hoist, control cir-cuit, and telescope pumps are mounted to an automaticpump disconnect on the rear of the transmission to aid incold weather starting as well as to reduce pump wear whiletraveling.

    View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com

  • 8 5460 (supersedes 5424)---0506---N3

    HTC-8690 Link-Belt Cranes

    J Lower Cab and ControlsEnvironmental Cab --- Fully enclosed, one person cab ofcomposite structure with acoustical insulation. Equippedwith:S Tinted and tempered glass windowsS Roll down left side window for ventilationS Sliding rear and right side windows for ventilationS Windshield wiper and washerS Six way adjustable and air suspended driver’s seat withseat belt

    S Two adjustable rear view mirrorsS Engine dependent warm---water heater with air ducts forwindshield defroster and cab floor

    S Adjustable sun visorS Dome lightS 12 volt connectionS Fire extinguisherAir Conditioning --- Optional --- Integral with cab heatingsystem utilizing the same ventilation outlets

    Cab Instrumentation --- Ergonomically positioned analoginstrumentation for driving including:S Speedometer with odometer, hourmeter, trip odometer,and clock

    S Front and rear air pressure with warning indicatorS Engine coolant temperature with warning indicatorS Engine oil pressure with warning indicatorS Voltage indicator with warning indicatorS Fuel levelS TachometerRight Side Console --- Controls and indicators for:S Transmission gear shiftingS Transmission digital readoutS Cruise controlsS Engine compression brake controls

    Dash Mounted Controls For:S Windshield wiper and washerS Carrier lightsS Carrier/upper throttle controlS Engine cooling fan overrideS Cab heater/air conditioningS Console dimmer switchS Engine diagnostic switchS Park brakeS Engine ignitionS Pick & carry switchDash Mounted Indicator For:S Check and stop engineS Turn signal indicationS Park brakeS Cruise activationS High beam headlightsS Check anti ---lock brake system

    Foot Controls For:S Carrier service brakesS Engine throttle

    J Additional EquipmentStandard:S Aluminum full deck fenders with mud flapsS Left and right bubble levelsS Air hose connection portsS Clearance flags

    Optional:S Pneumatic and electrical quick disconnect connectorsmounted on the rear for trailer or boom dolly brakes andlights

    S Left side aluminum storage boxS Rear mounted pintle hook

    View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com

  • 95460 (supersedes 5424)---0506---N3

    HTC-8690Link-Belt Cranes

    Axle LoadsBase crane with full tank of fuel

    and no counterweight

    Gross Vehicle Weight(1) Front Axles Rear Axles

    lb kg lb kg lb kg79,206 35 927 34,938 15 848 44,268 20 080

    Driver in carrier cab 250 113 315 143 ---65 ---29Rear pintle hook 13 6 ---6 ---3 19 8Pneumatic and electrical connectors for trailer or boom dolly 11 5 ---4 ---2 15 7Carrier aluminum storage box 59 27 28 13 31 14Air ride lift system --- rear axles 48 22 0 0 48 22Ether injection 13 6 12 5 1 1Air conditioning --- carrier 45 20 55 25 ---10 ---4Hoist drum follower --- main 69 31 ---35 ---16 104 47Auxiliary winch with 600 ft (182.9m) of 3/4” (19mm) type “RB” rope 731 332 ---239 ---108 970 440Hoist drum follower --- auxiliary 69 31 ---21 ---10 90 41Substitute 600 ft (182.9m) of rope with 730 ft (222.5m) of rope ---auxiliary 163 74 ---54 ---24 217 98

    Remove 730 ft (222.5m) of rope from rear (main) winch ---931 ---422 373 169 ---1,304 ---591Remove 600 ft (182.9m) of rope from front (auxiliary) winch ---768 ---348 252 114 ---1,020 ---463Upper aluminum storage box 42 19 ---4 ---2 46 21Air conditioner --- operator’s cab 220 100 ---7 ---3 227 103360˚ mechanical swing lock 140 64 21 9 119 542,500 lb (1 134.0kg) counterweight tray on upper 2,544 1 154 ---1,255 ---569 3,799 1 7233,000 lb (1 360.8kg) counterweight on upper 2,981 1 352 ---1,471 ---667 4,452 2 0196,000 lb (2 721.6kg) counterweight on upper 6,000 2 722 ---2,961 ---1 343 8,961 4 0656,000 lb (2 721.6kg) counterweight on upper 6,000 2 722 ---2,961 ---1 343 8,961 4 06512,000 lb (5 443.1kg) counterweight on upper 12,050 5 466 ---5,947 ---2 697 17,997 8 1633,000 lb (1 360.8kg) top counterweight on upper 3,009 1 365 ---1,485 ---674 4,494 2 038Floodlight to the front of boom base section 7 3 6 3 1 1Fly mounting brackets to boom base section for fly options 176 80 136 62 40 1835 ft (10.7m) offsettable, one---piece lattice fly --- stowed 1,591 722 1,539 698 52 2435---58 ft (10.7---17.7m) offsettable, two---piece (bi--- fold) lattice fly ---stowed 2,263 1 026 1,886 855 377 171

    Auxiliary lifting sheave 110 50 200 91 ---90 ---4140 ton (36.3mt) 4---sheave hook block at front bumper 900 408 1,570 712 ---670 ---30460 ton (54.4mt) 4---sheave hook block at front bumper 1,109 503 1,935 878 ---826 ---37590 ton (81.6mt) 6---sheave hook block at front bumper 1,554 705 2,711 1 230 ---1,157 ---5258.5 ton (7.7mt) hook ball at front bumper 360 163 628 285 ---268 ---12210 ton (9.1mt) hook ball at front bumper 580 263 1,012 459 ---432 ---196

    Counterweight Load TransferFront Axles Rear Axles

    lb kg lb kgTransfer 2,500 lb (1 134.0kg) counterweight tray to carrier deck 3,194 1 449 ---3,194 ---1 449Transfer 3,000 lb (1 360.8kg) counterweight to carrier deck 3,742 1 697 ---3,742 ---1 697Transfer 6,000 lb (2 721.6kg) counterweight to carrier deck 7,532 3 416 ---7,532 ---3 416Transfer 6,000 lb (2 721.6kg) counterweight to carrier deck 7,532 3 416 ---7,532 ---3 416Transfer 12,000 lb (5 443.1kg) counterweight to carrier deck 15,128 6 862 ---15,128 ---6 862Transfer 3,000 lb (1 360.8kg) top counterweight to carrier deck 3,778 1 714 ---3,778 ---1 714

    Axle Maximum Load @ 65 mph (105km/h)Front 46,400 lb (21 047kg) --- aluminum disc wheels with 445/65R22.5 tiresRear 52,000 lb (23 587kg) --- aluminum disc wheels with 12R22.5 tires

    (1) Adjust gross vehicle weight and axle loading according to component weight. All weights are ±3%.

    View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com

  • 10 5460 (supersedes 5424)---0506---N3

    HTC-8690 Link-Belt Cranes

    Axle Loads with 2--Axle or 3--Axle Boom DollyBase crane with full tank of fuel

    and no counterweight

    Gross VehicleWeight (1) Front Axles Rear Axles Dolly Axles

    lb kg lb kg lb kg lb kg79,206 35 927 29,457 13 361 35,680 16 184 14,069 6 382

    Nelson 2---axle boom dolly 6,000 2 722 0 0 0 0 6,000 2 722Nelson 3---axle boom dolly 9,000 4 082 0 0 0 0 9,000 4 082Driver in carrier cab 250 113 315 143 ---65 ---29 0 0Rear pintle hook 13 6 ---6 ---3 19 8 0 0Pneumatic and electrical connectors for trailer or boom dolly 11 5 ---4 ---2 15 7 0 0Carrier aluminum storage box 59 27 28 13 31 14 0 0Air ride lift system --- rear axles 48 22 0 0 48 22 0 0Ether injection 13 6 12 5 1 1 0 0Air conditioning --- carrier 45 20 55 25 ---10 ---4 0 0Hoist drum follower --- main 69 31 53 24 16 7 0 0Auxiliary winch with 600 ft (182.9m) of 3/4” (19mm) type “RB” rope 731 332 435 197 296 134 0 0Hoist drum follower --- auxiliary 69 31 40 18 29 13 0 0Substitute 600 ft (182.9m) of rope with 730 ft (222.5m) of rope ---auxiliary 163 74 97 44 66 30 0 0

    Remove 730 ft (222.5m) of rope from rear (main) winch ---931 ---422 ---623 ---282 ---308 ---140 0 0Remove 600 ft (182.9m) of rope from front (auxiliary) winch ---768 ---348 ---458 ---208 ---310 ---140 0 0Upper aluminum storage box 42 19 15 7 27 12 0 0Air conditioner --- operator’s cab 220 100 66 30 154 70 0 0360˚ mechanical swing lock 140 64 17 8 123 56 0 02,500 lb (1 134.0kg) counterweight tray on carrier deck 2,544 1 154 1,938 879 606 275 0 03,000 lb (1 360.8kg) counterweight on carrier deck 2,981 1 352 2,271 1 030 710 322 0 06,000 lb (2 721.6kg) counterweight on carrier deck 6,000 2 722 4,571 2 074 1,429 648 0 06,000 lb (2 721.6kg) counterweight on carrier deck 6,000 2 722 4,571 2 074 1,429 648 0 012,000 lb (5 443.1kg) counterweight on carrier deck 12,050 5 466 9,181 4 164 2,869 1 301 0 03,000 lb (1 360.8kg) top counterweight on upper 3,009 1 365 2,293 1 040 716 325 0 0Flood light to the front of boom base section 7 3 1 1 1 1 5 2Fly mounting brackets to boom base section for fly options 176 80 30 14 30 14 116 5335 ft (10.7m) offsettable, one---piece lattice fly --- stowed 1,591 722 168 76 170 77 1,253 56835---58 ft (10.7---17.7m) offsettable, two---piece (bi--- fold) lattice fly ---stowed 2,263 1 026 339 154 342 155 1,583 718

    Two 16 ft (4.9m) lattice inserts (stowed on 3---axle boom dolly) 1,584 718 0 0 0 0 1,584 718Auxiliary lifting sheave 110 50 ---19 ---9 ---19 ---9 149 6740 ton (36.3mt) 4---sheave hook block at boom head 900 408 ---134 ---61 ---135 ---61 1,169 53060 ton (54.4mt) 4---sheave hook block at boom head 1,109 503 ---165 ---75 ---167 ---76 1,441 65490 ton (81.6mt) 6---sheave hook block at boom head 1,554 705 ---231 ---105 ---233 ---106 2,019 9168.5 ton (7.7mt) hook ball at boom head 360 163 ---54 ---24 ---54 ---25 468 21210 ton (9.1mt) hook ball at boom head 580 263 ---87 ---39 ---87 ---39 754 342

    Counterweight Load TransferFront Axles Rear Axles Dolly Axleslb kg lb kg lb kg

    Transfer 3,000 lb (1 360.8kg) counterweight to the boom dolly ---2,271 ---1 030 ---710 ---322 2,981 1 352Transfer 6,000 lb (2 721.6kg) counterweight to the boom dolly ---4,571 ---2 074 ---1,429 ---648 6,000 2 722Transfer 6,000 lb (2 721.6kg) counterweight to the boom dolly ---4,571 ---2 074 ---1,429 ---648 6,000 2 722Transfer 12,000 lb (5 443.1kg) counterweight to the boom dolly ---9,181 ---4 164 ---2,869 ---1 301 12,050 5 466Transfer 3,000 lb (1 360.8kg) top counterweight to the boom dolly ---2,293 ---1 040 ---716 ---325 3,009 1 365

    Axle Maximum Load @ 65 mph (105km/h)Front 46,400 lb (21 047kg) --- aluminum disc wheels with 445/65R22.5 tiresRear 52,000 lb (23 587kg) --- aluminum disc wheels with 12R22.5 tires

    (1) Adjust gross vehicle weight and axle loading according to component weight. All weights are ±3%.

    View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com

  • 115460 (supersedes 5424)---0506---N3

    HTC-8690Link-Belt Cranes

    General Dimensions

    Not To Scale

    10’ 11”(3.33m)

    7”(17.78cm)

    17˚

    7’ 0”(2.13m)

    38’ 0”(11.58m)

    45’ 7”(13.89m)

    CL OF ROTATION

    9’ 6”(2.90m)

    11’ 0”(3.35m)

    14’ 8”(4.47m)

    10.75”(0.27m)GroundClearance

    5’ 9”(1.75m)

    34”(0.86m)

    16˚

    6’ 2.50”(1.89m)

    5’ 1.50”(1.56m)

    11’ 6.50”(3.52m)

    7’ 9” (2.36m)FULLY RETRACTED

    9’ 8” (2.95m)FULLY RETRACTED

    14’ 7” (4.45m)INTERMEDIATE EXTENDED

    16’ 7” (5.05m)INTERMEDIATE EXTENDED

    24’ 0” (7.32m)FULLY EXTENDED

    26’ 0” (7.92m)FULLY EXTENDED

    22.75”(0.58m)

    GROUND LEVELWITH CRANE

    ON OUTRIGGERS

    8.50”(0.22m)

    14.25”(0.36m)

    14.25”(0.36m)

    5’ 0”(1.52m)

    4’ 2”(1.27m)

    Turning Radius English MetricWall to wall over carrier 48’ 4” 14.7mWall to wall over boom 49’ 2” 15.0mWall to wall over boom attachment 51’ 0” 15.5mCurb to curb 44’ 1” 13.4mCenterline of tire 43’ 4” 13.2m

    Tail Swing English MetricWith counterweight 13’ 8” 4.2mWithout counterweight 13’ 1” 4.0m

    8’ 0.50”(2.44m)

    4.50”(114mm)

    Overall Width English MetricWith up to 32,500 lb (14 741.8kg) counterweight 8’ 6” 2.6mWith 39,500 lb (17 916.9kg) counterweight 11’ 0” 3.4m

    5’ 1”(1.55m)

    View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com

  • 12 5460 (supersedes 5424)---0506---N3

    HTC-8690 Link-Belt Cranes

    Working Range Diagram

    180(54.9)

    190(57.9)

    170(51.8)

    160(48.8)

    150(45.7)

    140(42.7)130(39.6)120(36.6)

    110(33.5)

    100(30.5)90

    (27.4)

    80(24.4)70

    (21.3)

    60(18.3)

    50(15.2)40

    (12.2)30(9.1)20(6.1)

    10(3.0)

    0

    200(61.0)

    210(64.0)

    220(67.1)

    230(70.1)

    240(73.2)

    250(76.2)

    10(3.0)

    20(6.1)

    30(9.1)

    40(12.2)

    50(15.2)

    60(18.3)

    70(21.3)

    80(24.4)

    90(27.4)

    100(30.5)

    110(33.5)

    120(36.6)

    130(39.6)

    140(42.7)

    150(45.7)

    160(48.8)

    170(51.8)

    180(54.9)

    190(57.9)

    200(61.0)

    210(64.0)

    220(67.1)

    230(70.1)

    CL

    RotationOf

    Operating Radius From Axis Of Rotation In Feet (Meters)

    HeightInFeet(Meters)AboveGround

    10’(3.0m)

    9’ 1”(2.8m)

    45_Offset 30_

    Offset

    15_Offset

    80˚ MaxBoom Angle

    38’ (11.6m)

    50’ (15.2m)

    10_

    20_

    30_

    40_

    50_

    60_

    70_

    60’ (18.3m)

    70’ (21.3m)

    80’ (24.4m)

    90’ (27.4m)

    100’ (30.5m)

    110’ (33.5m)

    120’ (36.6m)

    130’ (39.6m)

    140’ (42.7m)

    115.8’ + 35’(35.3m + 10.7m)

    115.8’ + 58’(35.3m + 17.7m)

    140’ + 35’(42.7m + 10.7m)

    140’ + 58’(42.7m + 17.7m)

    140’ + 90’(42.7m + 27.4m)

    BoomLength

    Boom+FlyLength

    140’ + 74’(42.7m + 22.6m)

    2_ Offset

    View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com

  • 135460 (supersedes 5424)---0506---N3

    HTC-8690Link-Belt Cranes

    Boom Extend ModesBoom Length Section Lengthft m T4 T3 T2 T150 15.2 50%60 18.3 91%70 21.3 100% 31%80 24.4 100% 71%90 27.4 100% 100% 11%100 30.5 100% 100% 49%110 33.5 100% 100% 88%120 36.6 100% 100% 100% 25%130 39.6 100% 100% 100% 63%140 42.7 100% 100% 100% 100%Boom Length Section Lengthft m T4 T3 T2 T150 15.2 48% 2%60 18.3 48% 42%70 21.3 48% 82%80 24.4 48% 100% 21%90 27.4 48% 100% 60%100 30.5 48% 100% 98%110 33.5 48% 100% 100% 35%120 36.6 48% 100% 100% 73%127.3 38.8 48% 100% 100% 100%Boom Length Section Lengthft m T4 T3 T2 T150 15.2 0% 48%60 18.3 0% 88%70 21.3 0% 100% 27%80 24.4 0% 100% 65%90 27.4 0% 100% 100% 4%100 30.5 0% 100% 100% 41%115.8 35.3 0% 100% 100% 100%Boom Length Section Lengthft m T4 T3 T2 T150 15.2 48% 2%60 18.3 48% 42%70 21.3 48% 51% 30%80 24.4 48% 51% 50% 18%90 27.4 48% 51% 50% 55%102 31.1 48% 51% 50% 100%

    Boom Length Section Length

    ft m T4 T3 T2 T1

    50.7 15.5 0% 51%

    63.7 19.4 0% 51% 50%

    76.5 23.3 0% 51% 50% 48%

    BaseT4 T3 T2 T1

    Extend Base

    38 ft (11.6m)

    140 ft (42.7m)

    BaseT4 T3 T2 T1

    Extend Base

    38 ft (11.6m)

    127.3 ft (38.8m)

    BaseT3 T2 T1

    Extend Base

    38 ft (11.6m)

    115.8 ft (35.3m)

    T4 T3 BaseT2 T1

    Extend Base

    38 ft (11.6m)

    102 ft (31.1m)

    BaseT3 T2 T1

    Extend Base38 ft (11.6m)

    76.5 ft (23.3m)

    View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com

  • 14 5460 (supersedes 5424)---0506---N3

    HTC-8690 Link-Belt Cranes

    Main Boom Lift Capacity Charts -- Standard8,500 lb Counterweight -- Fully Extended Outriggers -- 360˚ Rotation

    (All Capacities Are Listed In Pounds)

    Radius(ft)

    Boom Length (ft) Radius(ft)38 50 60 70 76.5/80 90 100 110 120 130 140

    9 164,400* 9

    10 154,600* 152,100* 117,900 89,700 10

    12 129,300* 131,300* 108,800 85,000 85,100** 12

    15 102,500 104,600 104,900 78,800 78,400** 57,700 15

    20 74,700 77,000 77,400 70,300 76,500** 56,200 49,100 42,500 20

    25 54,700 57,900 59,400 60,100 59,700 55,300 45,800 42,500 33,700 29,700 25

    30 39,600 43,300 44,400 44,600 44,300 43,800 43,200 38,300 31,200 29,400 24,400 30

    35 33,100 34,100 34,900 34,100 35,000 33,500 34,500 30,900 29,100 24,100 35

    40 26,100 27,200 27,900 28,100 28,000 28,000 27,500 28,100 26,900 24,000 40

    45 22,800 23,500 23,900 23,300 24,000 23,800 23,500 23,100 22,700 45

    50 18,900 19,600 20,000 20,200 20,100 19,900 19,600 19,100 18,800 50

    55 16,500 16,900 17,100 16,900 16,800 16,400 16,000 15,700 55

    60 14,000 14,400 14,600 14,500 14,300 14,000 13,600 13,200 60

    65 12,500 12,700 12,500 12,400 12,100 11,700 11,400 65

    70 10,800 11,000 10,900 10,800 10,400 10,100 9,700 70

    75 9,600 9,500 9,400 9,100 8,700 8,400 75

    80 8,400 8,300 8,200 7,900 7,500 7,200 80

    85 7,300 7,200 6,800 6,500 6,200 85

    90 6,300 6,300 6,000 5,600 5,300 90

    95 5,500 5,200 4,800 4,500 95

    100 4,800 4,500 4,100 3,800 100

    105 3,900 3,500 3,200 105

    110 3,300 3,000 2,700 110

    115 2,500 2,200 115

    120 2,000 1,700 120

    125 1,300 125

    130 900 130

    * Special Conditions Or Wire Rope Required** 76.5 EM5 mode

    This information is not for crane operation. Operator must refer to the in---cab information for crane operation. Rated lifting capaci-ties shown on fully extended outriggers do not exceed 85% of the tipping loads and on tires do not exceed 75% of the tipping loads.

    View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com

  • 155460 (supersedes 5424)---0506---N3

    HTC-8690Link-Belt Cranes

    8,500 lb Counterweight -- On Tires -- Stationary -- Boom Centered Over Rear(All Capacities Are Listed In Pounds)

    Radius(ft)

    Boom Length (ft) Radius(ft)38 50 60 70 80 90 100

    10 32,200 10

    12 29,000 30,400 12

    15 25,000 26,500 22,300 15

    20 19,700 21,400 22,300 17,700 20

    25 13,100 15,700 17,100 17,700 13,600 25

    30 8,800 11,400 12,700 13,300 13,600 10,800 8,900 30

    35 8,400 9,600 10,200 10,600 10,800 8,900 35

    40 6,100 7,400 8,000 8,400 8,600 8,500 40

    45 5,600 6,200 6,600 6,800 6,800 45

    50 4,300 4,900 5,200 5,400 5,400 50

    55 3,800 4,100 4,300 4,300 55

    60 2,900 3,200 3,400 3,400 60

    65 2,400 2,600 2,600 65

    70 1,800 2,000 1,900 70

    75 1,400 1,400 75

    80 900 900 80

    8,500 lb Counterweight -- On Tires -- Pick & Carry (1 mph) -- Boom Centered Over Rear(All Capacities Are Listed In Pounds)

    Radius(ft)

    Boom Length (ft) Radius(ft)38 50 60 70 80 90 100

    10 22,200 10

    12 19,800 21,100 12

    15 16,600 18,100 18,900 15

    20 12,500 14,200 15,100 15,500 20

    25 9,300 11,200 12,200 12,600 12,800 25

    30 6,800 8,800 9,800 10,300 10,600 10,800 8,900 30

    35 6,900 7,900 8,400 8,800 8,900 8,900 35

    40 5,300 6,400 6,900 7,200 7,400 7,400 40

    45 5,100 5,600 6,000 6,100 6,100 45

    50 3,900 4,500 4,900 5,100 5,000 50

    55 3,600 3,900 4,100 4,100 55

    60 2,700 3,100 3,300 3,300 60

    65 2,400 2,600 2,500 65

    70 1,800 2,000 1,900 70

    75 1,400 1,400 75

    80 900 900 80

    This information is not for crane operation. Operator must refer to the in---cab information for crane operation. Rated lifting capaci-ties shown on fully extended outriggers do not exceed 85% of the tipping loads and on tires do not exceed 75% of the tipping loads.

    View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com

  • 16 5460 (supersedes 5424)---0506---N3

    HTC-8690 Link-Belt Cranes

    11,500 lb Counterweight -- Fully Extended Outriggers -- 360˚ Rotation(All Capacities Are Listed In Pounds)

    Radius(ft)

    Boom Length (ft) Radius(ft)38 50 60 70 76.5/80 90 100 110 120 130 140

    9 165,000* 9

    10 155,400* 152,100* 117,900 89,700 10

    12 131,900* 133,900* 108,800 85,000 85,100** 12

    15 104,600 106,700 106,500 78,800 78,400** 57,700 15

    20 76,400 78,600 79,000 70,300 76,500** 56,200 49,100 42,500 20

    25 57,800 61,000 61,500 63,000 62,700 55,300 45,800 42,500 33,700 29,700 25

    30 42,300 46,000 47,100 47,300 47,000 46,500 45,200 38,300 31,200 29,400 24,400 30

    35 35,300 36,300 36,500 36,300 36,200 35,700 35,100 30,900 29,100 24,100 35

    40 27,900 29,000 29,700 29,900 29,900 29,800 29,300 28,800 28,700 24,000 40

    45 23,900 24,500 25,100 24,700 24,900 25,400 25,000 24,600 23,800 45

    50 20,300 21,100 21,500 21,400 21,500 21,400 21,000 20,600 20,300 50

    55 17,900 18,300 18,500 18,400 18,200 17,900 17,500 17,100 55

    60 15,300 15,700 15,900 15,700 15,600 15,300 14,900 14,500 60

    65 13,600 13,700 13,600 13,500 13,100 12,700 12,500 65

    70 11,800 12,100 11,900 11,800 11,500 11,100 10,800 70

    75 10,600 10,500 10,400 10,000 9,700 9,300 75

    80 9,300 9,200 9,100 8,800 8,400 8,100 80

    85 8,100 8,000 7,700 7,300 7,000 85

    90 7,100 7,100 6,700 6,400 6,100 90

    95 6,200 5,900 5,600 5,200 95

    100 5,500 5,200 4,800 4,500 100

    105 4,500 4,200 3,900 105

    110 3,900 3,600 3,300 110

    115 3,100 2,800 115

    120 2,600 2,300 120

    125 1,800 125

    130 1,400 130

    * Special Conditions Or Wire Rope Required** 76.5 EM5 mode

    This information is not for crane operation. Operator must refer to the in---cab information for crane operation. Rated lifting capaci-ties shown on fully extended outriggers do not exceed 85% of the tipping loads and on tires do not exceed 75% of the tipping loads.

    View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com

  • 175460 (supersedes 5424)---0506---N3

    HTC-8690Link-Belt Cranes

    11,500 lb Counterweight -- On Tires -- Stationary -- Boom Centered Over Rear(All Capacities Are Listed In Pounds)

    Radius(ft)

    Boom Length (ft) Radius(ft)38 50 60 70 80 90 100

    10 31,600 10

    12 28,500 29,900 12

    15 24,600 26,100 21,900 15

    20 19,400 21,100 21,900 18,600 20

    25 14,600 17,200 18,100 18,600 14,800 25

    30 10,000 12,600 13,800 14,400 14,800 11,800 9,400 30

    35 9,400 10,600 11,200 11,600 11,800 9,400 35

    40 7,000 8,200 8,800 9,200 9,400 9,400 40

    45 6,400 7,000 7,400 7,600 7,500 45

    50 5,000 5,600 5,900 6,100 6,100 50

    55 4,400 4,800 4,900 4,900 55

    60 3,400 3,800 4,000 3,900 60

    65 3,000 3,200 3,100 65

    70 2,300 2,500 2,400 70

    75 1,900 1,800 75

    80 1,400 1,300 80

    11,500 lb Counterweight -- On Tires -- Pick & Carry (1 mph) -- Boom Centered Over Rear(All Capacities Are Listed In Pounds)

    Radius(ft)

    Boom Length (ft) Radius(ft)38 50 60 70 80 90 100

    10 21,600 10

    12 19,300 20,600 12

    15 16,200 17,700 18,400 15

    20 12,100 13,800 14,700 15,100 20

    25 9,000 10,900 11,800 12,300 12,600 25

    30 6,500 8,500 9,500 10,000 10,300 10,500 8,600 30

    35 6,600 7,700 8,200 8,500 8,700 8,600 35

    40 5,000 6,100 6,700 7,000 7,200 7,100 40

    45 4,800 5,400 5,700 5,900 5,900 45

    50 3,700 4,300 4,700 4,800 4,800 50

    55 3,400 3,700 3,900 3,900 55

    60 2,600 2,900 3,100 3,100 60

    65 2,200 2,400 2,400 65

    70 1,600 1,800 1,800 70

    75 1,300 1,200 75

    80 800 700 80

    This information is not for crane operation. Operator must refer to the in---cab information for crane operation. Rated lifting capaci-ties shown on fully extended outriggers do not exceed 85% of the tipping loads and on tires do not exceed 75% of the tipping loads.

    View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com

  • 18 5460 (supersedes 5424)---0506---N3

    HTC-8690 Link-Belt Cranes

    Main Boom Lift Capacity Charts -- Optional32,500 lb Counterweight -- Fully Extended Outriggers -- 360˚ Rotation

    (All Capacities Are Listed In Pounds)

    Radius(ft)

    Boom Length (ft) Radius(ft)38 50 60 70 76.5/80 90 100 110 120 130 140

    8 180,000* 8

    9 167,100* 9

    10 158,300* 152,100* 117,900 89,700 10

    12 142,700* 138,700* 108,800 85,000 85,100** 12

    15 119,300 121,400 106,500 78,800 78,400** 57,700 15

    20 87,600 89,800 90,200 70,300 76,500** 56,200 49,100 42,500 20

    25 68,000 70,300 70,800 63,600 70,300** 55,300 45,800 42,500 33,700 29,700 25

    30 54,700 57,100 57,600 58,100 58,700 54,500 45,200 38,300 31,200 29,400 24,400 30

    35 47,500 49,100 49,400 49,200 48,800 42,500 35,500 30,900 29,100 24,100 35

    40 40,500 41,600 41,800 41,600 41,100 38,200 33,400 30,600 28,800 24,000 40

    45 34,600 34,900 34,600 34,200 33,700 30,300 29,900 28,600 23,800 45

    50 29,300 29,600 29,400 28,900 28,800 27,900 27,800 26,800 23,700 50

    55 25,500 25,300 26,000 24,800 24,700 25,300 24,800 23,600 55

    60 22,500 22,400 22,800 21,500 22,300 22,000 21,900 22,100 60

    65 20,000 20,100 20,000 19,600 19,300 20,000 19,600 65

    70 17,700 17,800 17,800 17,700 18,100 17,700 17,400 70

    75 15,800 16,500 16,500 16,200 15,800 15,500 75

    80 14,200 14,900 14,800 14,500 14,100 13,800 80

    85 13,500 13,400 13,100 12,700 12,500 85

    90 12,200 12,200 11,900 11,600 11,300 90

    95 11,100 10,800 10,500 10,200 95

    100 10,100 9,800 9,500 9,200 100

    105 8,900 8,600 8,300 105

    110 8,100 7,800 7,500 110

    115 7,100 6,800 115

    120 6,400 6,100 120

    125 5,500 125

    130 5,000 130

    * Special Conditions Or Wire Rope Required** 76.5 EM5 mode

    This information is not for crane operation. Operator must refer to the in---cab information for crane operation. Rated lifting capaci-ties shown on fully extended outriggers do not exceed 85% of the tipping loads and on tires do not exceed 75% of the tipping loads.

    View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com

  • 195460 (supersedes 5424)---0506---N3

    HTC-8690Link-Belt Cranes

    32,500 lb Counterweight -- On Tires -- Stationary -- Boom Centered Over Rear(All Capacities Are Listed In Pounds)

    Radius(ft)

    Boom Length (ft) Radius(ft)38 50 60 70 80 90 100

    10 28,300 10

    12 25,400 26,900 12

    15 21,800 23,400 24,300 15

    20 16,700 18,000 19,300 20,100 20

    25 13,000 14,900 15,700 16,100 16,300 25

    30 10,100 12,100 13,100 13,500 13,800 13,900 13,800 30

    35 9,900 10,900 11,400 11,800 11,900 11,800 35

    40 8,000 9,100 9,600 10,000 10,100 10,100 40

    45 7,600 8,100 8,500 8,700 8,600 45

    50 6,300 6,900 7,200 7,400 7,300 50

    55 5,700 6,100 6,300 6,200 55

    60 4,800 5,200 5,300 5,300 60

    65 4,300 4,500 4,500 65

    70 3,600 3,800 3,700 70

    75 3,100 3,100 75

    80 2,500 2,500 80

    85 1,900 85

    90 1,500 90

    32,500 lb Counterweight -- On Tires -- Pick & Carry (1 mph) -- Boom Centered Over Rear(All Capacities Are Listed In Pounds)

    Radius(ft)

    Boom Length (ft) Radius(ft)38 50 60 70 80 90 100

    10 18,200 10

    12 16,000 17,500 12

    15 13,200 14,800 15,600 15

    20 9,500 11,300 12,200 12,700 20

    25 6,700 8,600 9,600 10,000 10,400 25

    30 4,400 6,500 7,500 8,000 8,300 8,500 8,500 30

    35 4,700 5,800 6,300 6,700 6,900 6,800 35

    40 3,300 4,400 5,000 5,300 5,500 5,500 40

    45 3,300 3,900 4,200 4,400 4,400 45

    50 2,300 2,800 3,200 3,400 3,300 50

    55 2,000 2,400 2,600 2,500 55

    60 1,300 1,700 1,900 1,800 60

    65 1,100 1,200 1,200 65

    This information is not for crane operation. Operator must refer to the in---cab information for crane operation. Rated lifting capaci-ties shown on fully extended outriggers do not exceed 85% of the tipping loads and on tires do not exceed 75% of the tipping loads.

    View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com

  • 20 5460 (supersedes 5424)---0506---N3

    HTC-8690 Link-Belt Cranes

    39,500 lb Counterweight -- Fully Extended Outriggers -- 360˚ Rotation(All Capacities Are Listed In Pounds)

    Radius(ft)

    Boom Length (ft) Radius(ft)38 50 60 70 76.5/80 90 100 110 120 130 140

    8 180,000* 8

    9 167,600* 9

    10 158,800* 152,100* 117,900 89,700 10

    12 143,600* 138,700* 108,800 85,000 85,100** 12

    15 123,700 122,600 106,500 78,800 78,400** 57,700 15

    20 91,300 93,500 93,800 70,300 76,500** 56,200 49,100 42,500 20

    25 71,000 73,300 73,8