Upload
others
View
0
Download
0
Embed Size (px)
Citation preview
Page 1 of 17
TENDER DOCUMENT
FOR SALE OF PLANT AND MACHINERY OF
M/S. PAREKH PLATINUM LTD. (PPL)
THROUGH E-AUCTION,
lying in the Godown at Survey No.: 1607, Ground level, Nr.
Chiloda Circle, Himmatnagar– Chiloda Road, Village: Chhala,
Dist.: Gandhinagar, Gujarat
Issued by
The Authorised Officer
Website: www.ifciltd.com
Page 2 of 17
TENDER DOCUMENT FOR SALE OF PLANT AND MACHINERY OF M/S. PAREKH
PLATINUM LTD (PPL) LYING IN THE GODOWN AT SURVEY NO.: 1607, GROUND
LEVEL, NR. CHILODA CIRCLE, HIMMATNAGAR– CHILODA ROAD, VILLAGE:
CHHALA, DIST.: GANDHINAGAR, GUJARAT.
Ref. No. _________________ Date: ____________
M/s.__________________________
______________________________
______________________________
I. INTRODUCTION
Tenders are invited by Authorised Officer/ IFCI Limited/ Asset Sale Committee (ASC) on “AS IS
WHERE IS AND WHATEVER THERE IS BASIS” for purchase of plant and machinery of M/s.
Parekh Platinum Ltd. (PPL) lying in the Godown at Survey No.: 1607, Ground level, Nr. Chiloda
Circle, Himmatnagar– Chiloda Road, Village: Chhala, Dist.: Gandhinagar, Gujarat, through E-
Auction. Details of the assets for sale and Reserve Price thereof are mentioned below:
DESCRIPTION OF PALNT AND MACHINERY
Outstanding dues as on 11-09-2015
Description of the property to be sold.
Reserve Price Earnest Money Date & Time of Inspection
Date & Time for Auction
Rs.616,39,27,463/ (Rupees Six hundred & Sixteen Crores Thirty Nine Lakh Twenty Seven thousand Four Hundred & Sixty Three only together with interest and further interest at the contractual rates & other debits and also the dues of other secured creditors.
All Movable assets
(Plant & Machinery)
lying in the
Godown at Survey
No. 1607, Ground
Level, Nr. Chiloda
Circle,
Himmatnagar-
Chiloda Road,
Village Chhala, Dist.
Gandinagar,
Gujarat.
Rs. 122.00 Lakh (Rupee One Hundred & Twenty Two Lakhs Only)
Rs.12.20 Lakh
(Rupees Twelve
Lakh & Twenty
Thousand only)
18/01/2016 & 19/01/201611.00 to 15.30
08/02/2016 between 11.00 to 12.00 noon.
II. TERMS AND CONDITIONS OF THE SALE
2.1 The E-Auction will be conducted online through www.e-auctions.in and the E-Auction will
be conducted with the help of service provider M/s Nextenders (India) Pvt. Ltd on the date
and time as mentioned above with extension of 10 minutes each for bid increment and the
minimum bid increment amount of Rs.25,000/-.
2.2 Extension of date for submission of EMD Documents and auction will be informed to public
on IFCI website www.ifciltd.com
2.3 Persons wishing to participate are required to deposit, (a) Earnest Money Deposit, (b) his
Passport size photograph and (c) a copy of Photo ID Proof.
2.4 The Tender documents comprising detailed terms & conditions of the sale can be obtained
from the office of IFCI Ltd., Ahmedabad on payment of Rs.1000/- or can be downloaded
from IFCI’s website (www.ifciltd.com) w.e.f 02.01.2016. However, in case Tender
Document is downloaded from the website of IFCI Ltd., the bidder shall deposit an amount
of Rs.1000/- towards cost of Tender documents in addition to the EMD.
Page 3 of 17
2.5 The interested bidders shall deposit their EMD being 10% of the Reserve Price by way of
Demand Draft drawn in favor of “IFCI LTD.” addressed to the “The Authorized Officer,
IFCI Ltd., 501, IFCI Bhawan, Near Lal Bunglow, C.G. Road, Ahmedabad – 380006”. The
last date and time for deposit of the bid amount along with the tender form addressed to the
“The Authorized Officer, IFCI IFCI Ltd., 501, IFCI Bhawan. Near Lal Bunglow, C.G. Road,
Ahmedabad - 380006” is 05/02/2016 up to 17:00 hrs.
2.6 Tenders accompanied by short EMD or without EMD and/ or with their own conditions are
liable to be rejected/ ignored summarily.
2.7 Tenders not accompanied by demand draft of Rs.1,000/-, in favour of “IFCI Ltd.” in case the
tender document is down-loaded from the IFCI web-site, are also liable to be rejected/
ignored summarily.
2.8 On receipt of EMD the prospective bidders shall receive user-id/password on their valid
email id (mandatory for e-auction) from M/s Nextenders (India) Pvt. Ltd. The Prospective
bidders may avail online training on e-auction from M/s Nextenders (India) Pvt. Ltd. The
helpdesk number of the service provider is 022-25315555 and email-
2.9 The EMD of the successful bidder shall be retained towards part sale consideration and the
EMD of unsuccessful bidder shall be refunded. The EMD shall bear no interest. The
successful bidder shall have to deposit 25% of the sale price (less EMD) by way of demand
draft favoring IFCI Ltd. payable at Ahmedabad or through RTGS (RTGS details can be
obtained from IFCI’s office) by 17:00 hrs. on same day or within the extended time upto
1700 hrs. on next day if allowed by the Authorized officer Shri Vaishal Shah, Assistant
General Manager, IFCI Ltd., Ahmedabad (Mob.) 9924445778 & email
“[email protected]/ [email protected]”. 2.10 The successful bidder shall deposit the balance 75% of the sale proceeds on or before the 15th
day of the sale or within such extended period as agreed upon in writing by and solely at the
discretion of the Authorized officer. In case of default by the successful bidder, the amount
already deposited will be forfeited and the property will be put to re-auction and such bidder
shall have no claim/right in respect of property/amount.
2.11 The intending bidders should make their own independent inquiries and satisfy themselves
w.r.t. encumbrances, title of the property put on auction and claims/rights dues etc. affecting
the property prior to submitting their bid. The e-auction advertisement does not constitute
and will not be deemed to constitute any commitment or representation on behalf of IFCI
Ltd. The Property is being sold with all the existing and future encumbrances whether known
or unknown to IFCI Ltd.
2.12 The Successful purchaser shall bear the applicable stamp duties/additional stamp
duty/transfer charges, fee etc., if any, and also all the statutory/non-statutory dues, taxes,
rates, assessment charges, fee etc., if any, owning to anybody.
2.13 The Authorized officer is not bound to accept the highest offer and the Authorized officer
has the absolute right to accept or reject any or all offer(s) or adjourn/postpone or cancel the
E-Auction without assigning any reason.
2.14 The parties interested may inspect the property on date and time as mentioned above with
prior intimation/permission of the Authorized officer.
2.15 In case of any doubt regarding the terms & conditions of the sale, the decision of the
Authorised Officer/ IFCI Limited/ ASC will be final.
III. ELIGIBILITY
3.1 The bidder should:
a) Be any person, registered trust, registered firm, registered cooperative society, private limited
company, public limited company or partnership firm registered in India.
b) be legally competent to enter into contract as per prevailing laws.
Page 4 of 17
c) be financially sound.
d) enclose Income tax assessment orders for the last three years along with the tender.
e) enclose documentary proof that he has the liquidity, line of credit and other financial means to
meet the bid price.
3.2 Authorised Officer/ IFCI Limited/ ASC may also consider a bid submitted by a consortium of
persons/ companies. It is, however, made clear that there should be no change in the
consortium structure during the finalisation of the tender right up to the stage of depositing
the bid amount in full with IFCI Ltd. If there are any changes in the consortium structure,
Authorised Officer/ IFCI Limited/ ASC reserves the right to accept/ cancel the sale. However,
the financial arrangement between the parties should be specified in the tender documents.
3.3 No bid by a Consortium/ Partnership/ Company/ person shall be entertained, if, in the opinion
of the Authorised Officer/ IFCI Limited/ ASC, it has led to reduction in competition.
3.4 The bidder should thoroughly satisfy themselves about the nature, conditions and quality of
the assets. Authorised Officer/ IFCI Limited/ ASC gives no guarantee or warranty as to the
conditions of the assets/ material or/ its quality or fitness for any specific purpose or use. It
should be clearly understood that no claim/ complaint about the quality/ conditions/ fitness for
use will be entertained by Authorised Officer/ IFCI Limited/ ASC/ other secured lenders.
3.5 EMD and Quotations should be submitted in the prescribed form only, signed by the bidder
on each page in token of having accepted the same, and in a sealed cover. Same should be
addressed to Authorised Officer, IFCI Ltd., IFCI Bhawan, Near Lal Bunglow, C.G. Road,
Ahmedabad - 380006 and superscribing “OFFER FOR PURCHASE OF PLANT AND
MACHINERY OF M/S. PAREKH PLATINUM LTD (PPL)”.
IV. EARNEST MONEY DEPOSIT:
4.1 The tender should be accompanied with EMD of Rs. 12.20 Lakh. EMD has to be paid by
way of crossed DD/ Pay Order drawn on any Nationalised/ Scheduled bank in favour of IFCI
Ltd. and payable at Ahmedabad. No interest shall be payable on the Earnest Money Deposit.
4.2 Earnest Money in any other form, for example, cheque (including cheque made “good for
payment”), Bank Guarantee, Bid Bonds, Call Deposit etc. will not be acceptable to
Authorised Officer/ IFCI Limited/ ASC and such tenders are liable to be rejected.
4.3 The EMD of the successful bidder shall be retained towards part sale consideration and the
EMD of unsuccessful bidder shall be refunded. The EMD shall bear no interest. The
successful bidder shall have to deposit 25% of the sale price (less EMD) by way of demand
draft favoring IFCI Ltd. payable at Ahmedabad or through RTGS (RTGS details can be
obtained from IFCI’s office) by 17:00 hrs. on same day or within the extended time upto
17:00 hrs. on next day if allowed by the Authorized officer.
4.4 The successful bidder shall deposit the balance 75% of the sale proceeds on or before the 15th
day of the sale or within such extended period as agreed upon in writing by and solely at the
discretion of the Authorized officer. In case of default by the successful bidder, the amount
already deposited will be forfeited and the property will be put to re-auction and such bidder
shall have no claim/right in respect of property/amount.
V. MODE OF SUBMISSION OF TENDER/ BID:
Page 5 of 17
5.1 All tenders must be submitted in the prescribed form only, to be obtained from the Authorised
Officer against the payment of Rs. 1000/- towards the cost of the tender or downloaded from
website, in a sealed cover. The tender must be addressed to The Authorised Officer, IFCI
Ltd., 501, IFCI Bhawan. Near Lal Bunglow, C.G. Road, Ahmedabad – 380006 and
superscribing “OFFER FOR PURCHASE OF PLANT AND MACHINERY OF M/S.
PAREKH PLATINUM LTD. (PPL). The tender must be submitted by the appointed date
and time at the office of IFCI Ltd. at Ahmedabad as indicated at para 2.5.
5.2 Tenders should be submitted in a sealed cover, along with the followings:
a) Demand Draft/ Pay order of Rs. 12.20 Lakh towards EMD drawn in favour of “IFCI
Ltd.”, payable at Ahmedabad.
b) The Terms and Conditions of the Tender, duly signed by the tenderer on each page in
token of having accepted the same in toto.
c) A demand draft of Rs.1,000/- in favour of “IFCI Ltd”, in case the tender documents are
down-loaded from the IFCI web-site.
5.3 The Tenders/ Bids will not be accepted in case the same are sent through fax/ e-mail.
5.4 Incomplete tender or tenders submitted with qualifying conditions or with conditions at
variance with the Terms and Conditions of Tender Document are liable to be rejected.
VI. PAYMENT SCHEDULE:
6.1 The EMD of the successful bidder shall be retained towards part sale consideration. The
successful bidder shall have to deposit 25% of the sale price (less EMD) by way of demand
draft favoring IFCI Ltd. payable at Ahmedabad or through RTGS by 17:00 hrs. on same day
(RTGS details can be obtained from IFCI’s office)
6.2 The balance 75% of the sale consideration is to be paid on or before 15th day of the sale or
within such extended period as agreed upon in writing by and solely at the discretion of the
Authorized officer.
VII. DEFAULT IN PAYMENT BY THE PURCHASER
In case payment is delayed by the purchaser, the Authorised Officer/ IFCI Limited/ ASC at its
sole discretion, may extend the payment period alongwith interest. However, in case the
balance purchase consideration along with the due interest is not paid within the extended
period as may be prescribed, the sale of the asset will be automatically cancelled and the
Earnest Money Deposit of the tenderer and other money deposited till date will automatically
stand forfeited.
VIII. SALES TAX, EXCISE DUTIES AND LEVIES:
All taxes/ duties etc. if applicable and related to the assets shall be paid by the purchaser.
IX. DELIVERY PERIOD/ POSSESSION:
After receipt of full and final payment in lieu of the total sale consideration of the assets, IFCI
Ltd. will issue Certificate of Sale as provided under the Rules to SRFA & ESI Act, 2002, in
favour of the purchaser and the purchaser will take all necessary steps to take over the
possession of the assets immediately.
Page 6 of 17
The Assets has to be shifted by the tenderer/ bidder from the present premises within 15 days
from the date of issuance of certificate of sale.
Expenses pertaining to the shifting of the assets shall be borne by the tenderer/ bidder.
X. TERMINATION / BREACH OF CONTRACT
In the event of non-fulfillment of the terms and conditions by the bidder, Authorised Officer/
IFCI Ltd./ ASC shall cancel the contract/ sale with immediate effect, in which case, the EMD
along with any amount paid shall stand forfeited.
XI. FORCE MAJEURE:
Authorised Officer/ IFCI Limited/ ASC shall not be liable for any failure or delay in
performance due to any cause beyond their control including fires, floods, strikes, go-slow,
lock-out, closure, pestilence, distilence, dislocation of normal working conditions, war, riots,
epidemics, political upheavals, Governments actions, civil commotion, breakdown of
machinery, shortage of labour acts, demand or otherwise or any other cause or conditions
beyond the control of aforesaid causes or not and the existence of such cause or consequence
may operate at the sole discretion of IFCI Ltd. to extend the time of performance on the part
of IFCI Ltd. by such period as may be necessary to enable IFCI Ltd. to effect performance
after the cause of delays will have ceased to exist. The provisions aforesaid shall not be
limited or abrogated by any other terms of the contract whether printed or written.
XII. GENERAL INFORMATION:
12.1 It should be noted by the tenderer(s) that by entering into this contract, Authorised Officer/
IFCI Limited/ ASC is not precluded from entering into similar contracts with anyone else of
their choice at any time during the subsistence of this contract.
12.2 Authorised Officer/ IFCI Limited/ ASC shall have the right to issue addendum to tender
documents to clarify, amend, modify, supplement or delete any of the conditions clauses or
items stated therein. Each addendum so issued shall form a part of original invitation to
tender.
12.3 In case offer is not accepted, the bidder shall not be entitled to claim any cost, charges,
expenses incidental to or incurred by the bidder through or in connection with the submission
of the offer even though Authorised Officer/ IFCI Limited/ ASC may elect to withdraw the
invitation for quotation. Should all invitation for quotation be withdrawn or cancelled by
Authorised Officer/ IFCI Limited/ ASC for which Authorised Officer/ IFCI Limited/ ASC
shall have the right to do so at any time, the Earnest Money paid by the bidders with the
quotation will be refunded to them in due course, without interest.
12.4 The tenderer/ bidder shall bear all the cost associated with the preparation and submission of
bid. Authorised Officer/ IFCI Limited/ ASC will not, in any case, be responsible or liable for
any such costs regardless of the conduct or outcome of the tender process.
12.5 Unless otherwise specified, the price in the tender form should be quoted both in figures and
in words. Tenders containing overwritten or erased rates are liable to be rejected in absence
of any authentication by the tenderer’s signatures.
12.6 Authorised Officer/ IFCI Limited/ ASC reserves the right to cancel/ reject any or all the
quotations without assigning any reason thereof.
Page 7 of 17
12.7 The submission of the tender means and implies that the tenderer/ bidder has unconditionally
agreed to and accepted all the above terms and conditions of the tender.
12.8 Intending tenderer (s) may obtain any clarification required before tendering. Submission of
tender implies the tenderer(s) has obtained all the clarifications required.
12.9 The decision of the Authorised Officer/ IFCI Limited/ ASC in the matter, arising out of this
sale, shall be final in regard to all matters relating to the sale.
12.10 All suits or proceedings relating to any dispute or claim arising out of or in course of
performance of this contract shall be filed in appropriate court having jurisdiction in Delhi.
12.11 Tenderers must ensure the following while submitting the tender:
(A) THAT THE TENDER SHOULD BE FILLED IN THE FORMAT OF TENDER BID
ENCLOSED AT ANNEXURE– II.
(B) THAT EVERY PAGE OF TENDER DOCUMENTS IS DULY SIGNED BY THE
TENDERER BEFORE SUBMITTING THE TENDER.
(C) THAT ALL ALTERATIONS, ERASURE(S) AND OR OVER-WRITING, IF ANY,
IN THE SCHEDULE OR RATE(S) ARE DULY AUTHENTICATED BY THE
TENDERER’S SIGNATURE.
12.12 Tenderer should state whether he/ she is a relative of any Director(s) of IFCI Ltd. or
Tenderer is a firm in which Director(s) or his relative is a partner or tenderer is a company
in which Director of IFCI Ltd. or his relatives are member(s) or Director(s).
NOTE: COPY OF SALE NOTICE IS ENCLOSED HEREWITH FOR READY REFERANCE
Page 8 of 17
Annexure – I
M/S PAREKH PLATINUM LTD. (PPL)
Description of Movable Assets
All plant & machinery, as detailed below, lying in the Godown at Survey No.: 1607,
Ground level, Nr. Chiloda Circle, Himmatnagar– Chiloda Road, Village: Chhala, Dist.:
Gandhinagar, Gujarat:
Sr.
No.
Description Qty.
Bay – 1( From Entrance side)
1. M.S. Pipes dia. 3” , 2” , 4” & M.S. Structural Members,
M.S. ladder etc. (Approx Weight – 10 Ton.)
Lot.
2. Wooden Revolving chair. 5
3. Wooden desk small size. 2
4. Bag filter type unit with 3 section & 10 HP Motor on
Top.
1
5. Electric panel board only body. Size : 8’ x 7’. 1
6. Machine loose parts 6 nos. with M.S. frame Size : 5’ x
5’ x 8’ ht. (Approx – 2.5 Ton).
Lot.
7. S.S. Drum Dia. 4’ x 5’ long.(GSFC) 1
8. Annealing Furnace IECO Make, Italy. 4
9. Tube drawing machine with loose parts.(Lying in floor)
FIOA Make.(IDBI)
2
10. Machine Parts Inner side stamping (Approx wt. 1 Ton). 1
11. Batch Annealar Machine. Peterkock Make. 1
12. Electro pneumatic power press – 130 Ton. Cap. 1
13. Heavy roll – dia.1’ x 1’6” long. 2
14. Testing machine on stand. OMPAR Make. 1
15. Hydrogen Oxygen Generator. 3
16. High Precision lathe for rings & bangles (IDBI) 1
17. Degreaser. 1
Page 9 of 17
18. Four nos. pneumatic cylinder pickling type unit.
(Wt. 250 kg).
1 Set
19. M.S. Rack (assorted size) 5
20. Cutter Machine small – Tumac Make. 1
21. Oven with S.S. tank – Size : 5’ x 4’ 3’ deep. (IDBI) 1
22. Gas tube annealer (Two torch) FIOA Make. 1
23. Pin Making machine. (GSFC). 3
24. Process machine Cavalling Make. Small. 2
25. Electronic melting machine EIA Make. (Only frame)
parts missing – Mode F-16 (only control panel)
1
26. Snake chain machine.(lying in floor). 1
27. Schulthesiss Gmbh electric panel. 1
28. Hydraulic Press – 600 Ton. Energy Make. 1
29. Mechanical press – 15 Ton. Cap. Sangincomo Make. 1
30. Profile Machine.(lying in floor) Bema Make. 1
31. Rolling Machine – Rough / Finishing. 2
32. Machine frame – Size: 6’ x 4’ with some parts. 1
33. CE Make Aqua water machine (loose condition) 2
34. Laser well small Machine – Sisma Make. 1
35. Rolling Machine. Small. 1
36. Press – 30 Ton. Sangria Make. 1
37. Press – 15 Ton. Sangria Make. 6
38. Plastic welding machine-Frame only. 1
39. Tool Rack (9 drawer) 2
40. Manual Press. 1
41. Compacting & Hammering Machine – Sisma Make. 16
42. Polisher Machine – IECO Make. 2
43. Ice Lathe Machine – OMPAR SRL Make. 1
44. TEM SRL Make Machine with Hood. 1
45. Pin Making machine (only body). 2
Page 10 of 17
46. Process Machine – FIOA Make.(IDBI) 2
47. Belt Annealing furnace – IECO Make. 1
48. Press – 50 Ton. Cap. Energo Make. 1
49. Wooden Table. 1
50. Steel work table – 8’ x 4’. 2
51. Wire belt & strip belt annealer. 1
52. Heavy duty machine with roller on top (lying on floor) 1
53. Tube forming roller machine(body only) 1
54. Motorised tube winder – FIOA Make.(IDBI). 1
55. Ball Sizing machine. Fasti Make. 1
56. Press – 15 Ton. Cap. 2
57. Small Lathe. (IDBI) 1
58. Gas Annealer Machine (Body only). 1
59. Ball Drilling Machine.(Body only) 1
60. Rolling Machine panel (W/o wiring) 1
61. Worker drawer – 18 nos. section. 10
62. Welding transformer body. 5
63. Trolley. 4
64. Electric panel – 4’ x 4’ (body only) 2
65. Electronic melting machine (only body) Rod cast Make. 1
66. Tool Rack (9 drawer) 2
67. Diamond Cutting machine. Italy Make. 1
68. Rolling Machine. 1
69. Heavy Rolling Machine. 1
70. Ball Sizing machine-Fasti Make. 1
71. High Precision lathe for Rings & Bangles (IDBI) 4
72. Diamond process machine.(2 nos. head). 1
73. Electric Panel. 2
1. 74. Press – 120 Ton. Cap. 2
Page 11 of 17
2. 75. Oven body 3’ x 2’. 1
3. 76. Ball Sizing machine. Fasti Make. 1
4. 77. Machine body only. 1
5. 78. Rotating Burning furnace – Yasui Make. 1
6. 79. Cavelling Make S.S. tank Analyzer. 1
7. 80. Small Pressing Machine (Lying on floor) 2
81. Trolley 1
82. Tem SRL Make Machine with deeping tank. 26
83. Tem SRL Make Machine only body. 3
84. Wooden Table. 5
85. Machine frame (small). 3
86. FIA Pin Making Machine. 5
87. Small Machine frame. 4
88. Oxygen/Hydrogen Generator. 1
89. Welding Transformer – body only. 2
90. FIOA Machine body. 1
91. Electric panel board. 1
Bay – 2 (From Back Side)
1. Electric panel board. (small) 10
2. Small vessel with stirrer (FRP) w/o motor. 1
3. Chemical bath body only. 1
4. Centrifuge S.S. body with 5 HP Motor. 2
5. Chiller – 5 Ton. Cap. (Air Coled Package type with
hermetic Comp.)
3
6. Press – 30 Ton. Cap. 2
7. Lathe type machine – Fasti Make. (lying on floor) 1
8. Double head cutting grinding machine. (lying on floor) 1
9. Diamond cutting machine. (2 head) Fasti Make. 2
10. CE Make Diamond cutting & polishing machine. 2
11. M.S. Work table. 1
Page 12 of 17
12. Ball Marking Machine. FIOA (lying on floor). 1
13. Power press – 30 Ton. 2
14. Power press – 15 Ton. 4
15. Diamond Processing Machine – OMPAR Make. 1
16. Ultrasonic Cleaner FIOA Make. – 18 nos. section. 3
17. Hollowing Unit - 3 1
18. Chemical Processing unit – 2 nos. tank. 1
19. Chemical Processing unit with pump.(IDBI) 2
20. Beater Analyzer FIOA Make. 1
21. Oxygen/Hydrogen Generator. (lying in floor) 1
22. Tool Rack (9 drawer) 2
23. Table 2
24. Ultrasonic Cleaner (3 tanks) FIOA Make. 2
25. Chemical bath Body only FIOA Make. – 6 nos. section. 1
26. Finishing system IM Make. 2
27. Tube rolling machine. 1
28. Annealing Furnace IECO Make, Italy. 5
29. Diamond cutting machine. 2
30. Small type lathe machine. OMPAR Make. 2
31. Heavy duty lathe CE Make. 1
32. Tube drawing harder box – 12’ x 3’ 4’ ht.(IDBI) 1
33. Diamond processing machine. 1
34. Gang slitting machine. 1
35. Rolling cutting machine. Heavy. 1
36. Wire drawing machine – 4 head. 2
37. Wet vibrator TM Make. 1
38. Horizontal Centrifuge 2 drum. 1
39. Wooden ball mill type machine FIOA Make.(Lying on
floor)
1
40. Dryer with 2 nos. fan & motor. 1
Page 13 of 17
41. FIOA Make Machine frame. (Lying on floor) 3
42. Mixer FIOA Make. (IDBI) 1
43. Chemical unit. 4
44. Oven. 1
45. M.S. cupboard. 3
46. Table. 1
47. Electric panel. 4
48. Chiller.- Package Type – 5 TR – Air Coled 1
49. Ultrasonic Cleaner Body only FIOA Make. – 18 nos.
section.
1
50. Wet vibrator large IM Make. 1
51. Cavaline Make Dryer. 4
52. Mixer type frame. 1
53. Small rolling machine – chain type. 1
54. Chemical bath – (3 section) FIOA Make. 2
55. FIOA Make Melting furnace.(IDBI) 1
56. Wire drawing machine. 2 head- small. 1
57. Oxygen/Hydrogen Generator. 1
58. S.S. tank – 1000 lit. 2
59. Oven – FIOA Make. (lying in floor) 1
60. M.S. Rack – 12’ x 6’ x 6’ht. 1
61. Surface grinder Praga Make. 1
62. M.S. Cupboard. 1
63. Car – OPEL – GJ-18A-556 – Scrap 1
64. PVC tank – 20000 lit. 3
65. Steel, Wooden frames, Machine bodies Etc. Approx- 20
Ton.
Lot.
66. S.S. frame with Glass Vessels – 10’ x 4’ x 4’ 1
67. Plastic Crates. 100
68. S.S. Trolley. 1
Page 14 of 17
Bay – 3 (From Entrance side)
1. Scrap hip of Machine body, PC units, Steel frame,
wooden items, FRP vessel, GI Ducts, GI Sheets etc.
(Approx Wt. 15 Ton.)
Lot.
2. Small Milling Machine FIOA Make. 2
3. Tools Rack. 1
4. Electrical Panel board. 3
5. Softener vessel with Piping. 2
6. Lathe type machine on floor. 1
7. M.S. Rack. 1
8. Centrifuge blower dia.3’ 3
9. M.S. Scrap.(2 Ton)., Piping, platform railing etc. Lot.
10. Air receiver M.S. 5 m3 Cap. 1
11. M.S. Cup board. 5
12. FRP Scrubber vessel- 10’ ht. 4
13. FRP tank 1.2 Mt. x 1.2 Mt. x 1.5 Mt. – 2000 Lit. 1
14. Hydraulic Power pack unit. 1
15. M.S. Silos. 2
16. M.S. vessel – 2 M3. Cap. 1
17. M.S. Silos – 2 M3. Cap. 2
18. D.G. set with broken alternator. 250 KVA. Approx. 1
19. Bending Machine. 1
20. Shearing Machine.
21. FIOA Make Chemical unit. 7
22. Electrical Panel. 4
23. Machine frame (lying on floor) 1
24. Dryer unit. 3
25. Filter press 2.5’ x 2.5’ 1
26. Rack – 12’ x 3’. 2
27. M.S. cupboard. 1
Page 15 of 17
28. M.S. Worktable. 1
29 M.S. Softener vessel – ION Exchange – 2 M3 Cap. 1
30. Annealing Furnace. 3
31. Electric Cables. Lot.
32. M.S. Vessel – 2 M3 Cap. 2
33. Air Compressor Receiver. 1
34. M.S. Vessel with stirrer – 1.5 M3 Cap. 1
35. Filter press. 1
36. M.S. Rack.
3
Bay – 4 (From Back Side)
1. Wooden table. 10
2. Assembly table. 15
3. Electric panel board. 5
4. Office table. 4
5. M.S. Work table. 1
6. Sisma Make loose Machine. 1
7. Small Size Air Compressor receiver. 2
8. Wooden Furniture. Lot.
9. M.S. Rack. 10
10. Water cooler (loose condition) 2
11. M.S. & Wooden scrap, steel locker, cupboard, Tools
rack etc.
Lot.
12. Canteen Furniture – 15 nos. Table (wooden) with 4 nos.
M.S. chair duly attached in each.
Lot.
13. Revolving Wooden chair. Lot.
Page 16 of 17
Annexure – II
BID
The Authorised Officer,
IFCI Ltd.,
501, IFCI Bhawan,
Nr. Lal Bunglow,
C.G. Road,
Ahmedabad – 380006.
1. Particulars of the Bidder,
1.1 Full name of the Bidder (in block letters):
1.2 Father’s Name:
1.3 Age:
1.4 Whether the bidder is competent to contract under Indian Contract Act, 1872 as per Foreign
Exchange Regulation Act, 1973 / Foreign Exchange Management Act, 1999 in case of NRI
(Tick whichever is applicable)
YES/NO
1.5 Present Business Activity:
2. Constitution of Bidder (Tick whichever is applicable)
Public Limited Company
Private Limited Company
Partnership
Individual/ Sole Proprietary
Others (specify)
(Furnish documents in support)
Applicant’s registered office/ place of business
Address
Telephone No.
Fax No.
E-Mail No.
3. Particulars of Bid
3.1 The price offered is Rs._______________________ (Rupees:_____
_____________________________________________________) for plant and machinery of
M/s. Parekh Platinum Ltd (PPL). lying, in the Godown at Survey No.: 1607, Ground level,
Nr. Chiloda Circle, Himmatnagar– Chiloda Road, Village: Chhala, Dist.: Gandhinagar,
Gujarat on “AS IS WHERE IS AND WHATEVER THERE IS BASIS”.
Page 17 of 17
3.2 Particulars of Earnest Money Deposit of Rs. 12.20 Lakh (being 10% of the reserve price):
DD/Pay Order No. Date Name of Bank and Branch
Certified that:-
(i) I/We agree to abide by the decision of the Authorised Officer/ IFCI Limited/ ASC
(ii) I/We have read and understood terms and condition and hereby unequivocally and
unconditionally accept the same.
(iii) I/We have inspected the site where plant and machinery is lying and have satisfied
myself/ourselves for which quotation is being submitted.
Date: Applicant’s Signatures
Full Name:
Designation:
Name of the Company:
Address :