FOR POOL AND SPA MODEL AK110

ACU-TROL® CHEMICAL CONTROLLER FOR POOL AND SPAMODEL AK110

INSTALLATION ANDUSER’S GUIDE

IMPORTANT SAFETY INSTRUCTIONSREAD AND FOLLOW ALL INSTRUCTIONS

SAVE THESE INSTRUCTIONS

Certi�ed to NS F/ ANSI Standa rd 50

2

If you have questions about ordering Pentair Aquatic Systems replacement parts, and pool products, please contact:

CUSTOMER SERVICE / TECHNICAL SUPPORT

Customer Service and Technical Support, USA (8 A.M. to 4:30 P.M. — Eastern/Pacific Times)

Phone: (800) 831-7133

Fax: (800) 284-4151

Web site

Visit www.pentairpool.com or www.staritepool.com

Sanford, North Carolina (8 A.M. to 4:30 P.M. ET)

Phone: (919) 566-8000

Fax: (919) 566-8920

Moorpark, California (8 A.M. to 5 P.M. PT)

Phone: (805) 553-5000 (Ext. 5591)

Fax: (805) 553-5515

3

CONTENTS

SECTION 1 INFORMATION IMPORTANT WARNING AND SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6 CONTROLLER OVERVIEW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

SECTION 2 INSTALLATION INSTALLATION PREPARATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 INSTALLATION SUMMARY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 MOUNTING INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 ELECTRICAL SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 INPUT VOLTAGE SELECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 CONNECTING POWER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 ELECTRICAL LOADS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 RELAY BOARD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 CHEMICAL FEED PUMP LOCATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 HEATER INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 PLUMBING INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

SECTION 3 HARDWARE MODULES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 SENSOR MODULES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 COMMUNICATION MODULES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 RELAY MODULES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

SECTION 4 AK1200 FLOW CELL AK1200 FLOW CELL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 FLOW CELL ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 FLOW CELL MOUNTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 INLET AND EXIT LINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 SENSORS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

SECTION 5 SENSORS pH AND ORP SENSORS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 CALCULATED PPM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 AKCOLOR PPM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 TEMPERATURE SENSOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 FLOW SENSORS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 SENSOR CARE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 FINISHING AND TESTING THE INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

SECTION 6 OPERATIONS CONTROLLER WINDOW NAVIGATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 SELECTING ITEMS IN THE WINDOWS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 MAKING CHANGES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 START UP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 INITIALIZING THE CONTROLLER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 POWER UP SCREEN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 DISPLAY SCREEN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 THE DISPLAY SCREEN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 CALIBRATING TEMPERATURE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 CALIBRATING pH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 CALIBRATING ORP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 CALIBRATING CALCULATED PPM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 MANUAL RELAY CONTROL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 RELAY TIME DISPLAY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 SET UP FLOW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 CONFIGURATION MENU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 NAME . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 SYSTEM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

4

PROGRAMMING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 SERVICE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 DATA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 COMMUNICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 PAGER SETUP SCREENS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 EMAIL SETUP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 SECURITY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 WIZARDS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38SECTION 7 TROUBLESHOOTING COMMON PROBLEMS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 REAL TIME CLOCK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 ORP TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 USING THE TEST STRIP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 AKCOLOR PPM TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 pH TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

SECTION 8 APPENDIXES UTILITY PASSWORDS 9000-9020 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 SET-UP DIGITAL FLOW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 PROPORTIONAL FEED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

SECTION 9 WIRING DIAGRAMS RELAY WIRING DIAGRAMS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 SENSOR WIRING DIAGRAMS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

SECTION 10 MENUSSCREEN NAVIGATION KEYS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 MAIN STATUS SCREEN NAVIGATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 RELAY AND ALARM TIMER SCREEN NAVIGATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 CONFIGURATION MENU SCREEN NAVIGATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 CONTROLLER NAME SCREEN NAVIGATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 SYSTEM SETUP SCREEN NAVIGATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56 PROGRAMMING SCREEN NAVIGATION , pH MIX TIME . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 PROGRAMMING SCREEN NAVIGATION, pH CYCLE TIME . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 PROGRAMMING SCREEN NAVIGATION, ORP MIX TIME . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62 PROGRAMMING SCREEN NAVIGATION, ORP CYCLE TIME . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66 PROGRAMMING SCREEN NAVIGATION, ORP CAL HYPO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70 PROGRAMMING SCREEN NAVIGATION, PPM CYCLE TIME . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74 PROGRAMMING SCREEN NAVIGATION, PMM MIX TIME . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78 PROGRAMMING SCREEN NAVIGATION, PROBE CLEAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82 PROGRAMMING SCREEN NAVIGATION, HEATER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84 PROGRAMMING SCREEN NAVIGATION, ALARM OUT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96 PROGRAMMING SCREEN NAVIGATION, AUX . MAKE-UP (AUTO-FILL) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90 PROGRAMMING SCREEN NAVIGATION, DAILY EVENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92 PROGRAMMING SCREEN NAVIGATION, WEEKLY EVENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96 PROGRAMMING SCREEN NAVIGATION, FRONT PANEL ALARM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96 PROGRAMMING SCREEN NAVIGATION, PAGER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 PROGRAMMING SCREEN NAVIGATION, EMAIL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104 WIZARDS SETUP SCREEN NAVIGATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108 DATA SCREEN NAVIGATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112 COMMUNICATIONS SCREEN DIAL-UP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114 COMMUNICATIONS SCREEN INTERNET MODEMS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118 SECURITY SETUP SCREEN NAVIGATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124 AKCOLOR SCREEN NAVIGATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126 SERVICE SCREEN NAVIGATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128

CONTENTS (Continued)

AK110 CHEMICAL CONTROLLER ILLUSTRATED PARTS LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130

5 ACU-TROL® AK110 Chemical Controller Installation and User's Guide

Most states and local codes regulate the construction, installation, and operation of public pools and spas, and the construction of residential pools and spas. It is important to comply with these codes, many of which directly regulate the installation and use of this product. Consult your local building and health codes for more information.

SERIOUS BODILY INJURY OR DEATH CAN RESULT IF THIS PRODUCT IS NOT INSTALLED AND USED CORRECTLY.

INSTALLERS, POOL OPERATORS AND POOL OWNERS MUST READ THESE WARNINGS AND ALL INSTRUCTIONS BEFORE USING THIS PRODUCT.

IMPORTANT NOTICE - Attention Installer: This Installation and User’s Guide (“Guide”) contains important information about the installation, operation and safe use of this product. This Guide should be given to the owner and/or operator of this product.

DO NOT INSTALL THE AK110 CHEMICAL CONTROLLER WHERE IT CAN BE READILY ACCESSIBLE TO THE PUBLIC.

Before installing this product, read and follow all warning notices and instructions in this Guide. Failure to follow warnings and instructions can result in severe injury, death, or property damage. Call (800) 831-7133 for additional free copies of these instructions.

BEFORE WORKING ON THE AK110 CHEMICAL CONTROLLER: Always disconnect power to the IntelliChem controller at the circuit breaker before servicing. Failure to do so could result in death or serious injury to service person, pool users or others due to electric shock.

RISK OF ELECTRICAL SHOCK OR ELECTROCUTION:

This product must be installed by a licensed or certified electrician or a qualified pool professional in accordance with the National Electrical Code (NEC), NFPA 70 or the Canadian Electrical Code (CEC), CSA C22.2. All applicable local installation codes and ordinances must also be adhered to. Improper installation will create an electrical hazard which could result in death or serious injury to pool users, installers or others due to electrical shock, and may also cause damage to property.

Do not permit children to operate this equipment.

When mixing acid with water, ALWAYS ADD ACID TO WATER. NEVER ADD WATER TO ACID. When adding any chemical to the pool/spa, be sure to follow the manufacturer’s instructions thoroughly.

DO NOT MIX SODIUM HYPOCHLORITE AND MURATIC ACID

Risk of electrical shock. Connect AK110 Chemical Controller to a ground-fault interrupter-circuit (GFCI). Contact a qualified electrician if you cannot verify that the receptacle is protected by a GFCI.

BE SURE TO DISCONNECT ALL SUPPLY CONNECTIONS BEFORE SERVICING.

BEFORE USING YOUR POOL, SPA OR HOT TUB, CHECK THE pH AND SANITIZER LEVELS OF THE WATER.

IF “CLEAR OVERFEED LIMIT” SETTING IS SET TO 24 HOURS, DO NOT SET “FEED TIME” GREATER THAN 20 HOURS AS THIS WILL VOID NSF CERTIFICATION.

IMPORTANT WARNING AND SAFETY INSTRUCTIONS


WARNING CHEMICAL BURN HAZARD

Make sure pumps are OFF before drilling into pipes. Securely fasten all electrical, water and chemical lines. Locate chemical feed

pumps and chemical storage tanks in a safe and secure area.

PLEASE READ THIS USER MANUAL completely before installing or operating the equipment . The Controller Pool and Spa Chemical Con-troller is a Class 1 product for protection against electric shock and a Type 1 product with regards to disconnection of the control circuits .

Be sure to observe the following safety precautions:

• Donotpermitanyoneuntrainedorundertheageof18tousethisproduct.• Unitmustbeproperlygrounded.• Frontpanelmustbeclosedbeforepowerisapplied.• AlwaysturnOFFmaincircuitbreakertounitandallequipmentbeforeservicing.• Touchingthecontroller’sinternalpartscouldresultininjuryandordamagetothecontroller.Incaseofa malfunction, only a qualified technician should repair the controller .• RiskofElectricShock.Connectonlytoagroundingtypereceptacleprotectedbyaground-faultcircuitinterrupter(GFCI).• Donotburycord.Routecordtoeliminateexternaldamage.• Becarefulnottodamageanyoftheinsulationonwiresorthepowercord.Shouldthecordbedamaged,returnittoyourdealerfor a replacement . Continued use could result in fire or electric shock .• Toreducetheriskofelectricshock,donotuseanextensioncordtoconnectunittoelectricsupply,providea properly located GFCI .• Neverremoveorinstallanycablesonthecircuitcardswhenpowerisapplied,damagetothecomponentsmay occur .

GENERAL WARNINGS AND SAFETY PRECATIONS

!

WARNING CHEMICAL HAZARD CONDITION

DO NOT TURN CHEMICAL FEED PUMPS ON WHEN BOTH FLOWCELL VALVES ARE CLOSED.

!

WARNING CHEMICAL BURN HAZARD: Make sure all pumps are switched off at the main circuit breakers at the house before drilling into any pipes. Securely fasten all electrical, water and chemical lines. Locate chemical feed pumps and chemical storage tanks in a safe and secure area.

Strictly follow the acid manufacturers safety and handling protocols including hand, body and eye protection when transferring or handling acid. Safety precautions should be used when handling Muriatic acid to control pH water levels. Muriatic acid can cause serious body injury and damage pool equipment. Extra care must be taken when installing, maintaining and operating acid pump feed systems. Acid is dangerous to handle and should be properly contained, transported, poured, stored, and dispensed.

Check the pH and sanitizer levels of the water before use.

Periodically use an independent pH and Chlorine test kit to verify that pH and chlorine is at a safe level. If the pH and Oxidation Reduction Potential (ORP) or Flow Cell sensors are broken, depleted or dirty with oils, lotions, or other contaminants, they can report inaccurate results to the system causing incorrect water chemistry, which could harm people or equipment.

Check the IntelliChem main status display each day to ensure there are no Alarm messages. See “Troubleshooting” section for more information.installing, maintaining and operating acid pump feed systems. Acid is dangerous to handle and should be properly contained, transported, poured, stored, and dispensed.

IMPORTANT WARNING AND SAFETY INSTRUCTIONS


The AK110PS Pool and Spa Chemical Controller ("Controller") is a microprocessor based modular automation system capable of continuous local or remote monitoring and control of water chemistry for pool and spa applications. The Controller will maintain the pH and sanitizer levels of your water system automatically. Customized applications are possible with the addition of optional expansion modules.

MODULAR: The Controller is designed to grow with the needs of the customer. There are optional modules that can be installed as the need arises without having to remove the Controller from the wall.

INTERFACE: The Controller uses a built-in keypad with 16 buttons, and an easy to read 80 character liquid crystal display. The display’s internal back-light provides viewing in low light conditions. The back-light illumination time can be adjusted to suit the operator. MENUS: The Controller features easy to use display menus for on screen navigation. MEMORY: In case of power loss, all set-points and programming are retained in nonvolatile memory. These values will be protected for a minimum ten (10) years without having power applied.

DATA RECORDING: The Controller has the ability to record data at 2 hour time intervals. Over 1 month of data can be recorded before filling up the memory. When the memory is full the new data will overwrite the oldest data.

RELAYS: The Controller can control up to three (3) relays. There are various types of relay configurations available to different types of load requirements.

DISPLAYS: The Controller can display measurements, relay ON/OFF states, length of time that relays have been on and the alarm status.

SENSORS: The Controller can measure readings and control based on inputs from the following sensors: temperature, digital flow, pH, ORP, and AKColor PPM.

VOLTAGE: The Controller includes a switch to select the input voltage of 110 or 220 VAC (single or dual phase).

HEALTH: The Controller can be configured to maintain the bacteriological and physiological requirements of state and local health departments. In addition, the Controller has the capability to be configured such that equipment can be protected from the effects of improper water balance.

REMOTE MONITORING: The Controller can be easily configured for remote, full duplex communication using an internal 56K modem and a phone line, or a wireless modem and an internet connection. This feature allows a user remote access to Controller operations using an MS Windows Based PC and the Acu-Com Software. The Acu-Com Software is a full featured software package that allows the operator to download recorded data, monitor system inputs in real time and provides a graphing option that allows for detailed analysis of water system parameters and performance. In addition, AcuManage II, an online database management system will display data from any internet enabled Controller.

REMOTE PAGING: With the optional modem installed, the Controller can be programmed to dial out to electronic paging systems for notifying operators of an alarm condition.

REMOTE EMAILING: With the optional wireless modem installed, the Controller can be programmed to send an email notifying operators of an alarm condition.

SECURITY: The Controller provides two level security protection based on passwords for both local and remote interaction.

AK110 Pool and Spa Chemical Controller Overview


SECTION 2 INSTALLATION

Installation Preparation

Installation Summary

Inspection: Upon receiving the Controller check the carton carefully. Report any shipping damage to shipping company. Examine the enclosed shipping list and verify that all items are present. Contact Customer Support (800) 831.7133 if any items are missing or have been damaged. Use care when unpacking equipment to avoid damage or loss of small parts. Verify that the fuses are the correct values and that the voltage select switch is in the proper position.

The following steps are required to install the Controller:

1. Identify new and existing equipment to be connected.

2. Decide if the sensors will be in-line, in a separate by-pass line, or if the AK1200 flow cell will be used. Caution: If the AK1200 flow cell is used, the input water maximum pressure is 25 PSI.

3. Determine the supply voltage, 110 VAC or 220 VAC, and set the supply voltage switch as necessary.

4. Determine if the control to the equipment uses the same voltage as the supply voltage. All controlled equipment must be compatible.

5. Determine the water-tap points for the flow cell bypass inlet and outlet.

6. Mount the Controller away from direct sunlight and on a flat vertical surface. 7. Connect the supply voltage with main breaker off. (Must be a separate dedicated circuit GFCI).

8. If using an AK1200 flow cell install the bypass now.

9. Connect the sensors.

10. Test the plumbing for leaks.

11. Turn on the Controller for the first time.

12. Test the equipment, using the Controller manual relay mode.

13. Calibrate the probes, then re-calibrate as the probes acclimate to the system. Acclimation can take as little as two hours or as long as 24 hours.

14. Program the Controller.

15. Call or visit the controller over the next few days to insure the system is balanced and in control. Fine-tune the setup if necessary.


WARNINGKeep the Controller out of direct sunlight, inside a room if possible. Direct sunlight on the Controller will result in inaccurate readings.

A shade screen should be used for outdoor installations.

Mounting InstructionsSelect a location for mounting the Controller, meeting the following recommendations:

1. Mount at least ten (10) feet from open water.

2. Mount close enough for the supplied power cord to reach the supply voltage. The Controller will not operate properly without a solid earth ground connection.

3. Supply power must be routed to the Controller in accordance with the applicable codes in the area; the supplied power cord is not code in some areas.

4. The installation surface must be solid and vertical. Do not mount the Controller in a horizontal position.

WARNINGProper and safe operation requires an earth ground connection.

5. Maintain adequate clearance for opening the front panel enclosure.

6. The environment should be free of chemical fumes and excessive heat. The maximum room temperature is should not exceed 110 ºF.

7. Mount as far as possible from sources of electrical interference.

8. Install the four mounting feet as desired to the Controller back and prepare the hole to the mounting surface as desired.

9. Hold the Controller against the mounting surface with a closed lid and mark the location of the mounting bracket located on the top of the Controller next to the wall. Prepare holes as necessary and secure

Controller using hardware provided.

10. Mount on a flat surface. Controller box will distort if mounted on an uneven surface.

11. Pre-install screws with ¼ left out on bottom so that the Controller can slide into them. Install the remaining side screws and tighten.

!

!


Input Voltage Maximum Input AC Voltage 250 VAC

Input Current Maximum Input Current 5 Amps (AC)

Output Current Maximum Current for 3 Relays 110V 5 Amps (AC)

Maximum Combined Current 3 Relays 24V Dry 1 Amp

Temperature Min./Max. Operating Temperature 30° - 110° F

Standby Current Current with all Relays OFF, LED ON 50mA (AC) Typical

Current with all Relays OFF, LED OFF 30mA (AC) Typical

Sensor Range pH 4.22 - 9.78

ORP 0 - 999mV Temperature 32 - 212° F PPM 0 - 9.99 PPM Digital Flow 0 - 9999 GPM Volume 0 - 65,535 Gallons Flow Open or Closed

Electrical SpecificationsThe following electrical specifications in the table below must not be exceeded.

Input Voltage Selection

The Controller will operate on input voltages of 110 VAC or 220 VAC. The factory jumper setting is for 110 VAC.

The supply power is commonly used to power the feed pumps and other external loads. If all the loads are 110 VAC then use 110 VAC or if the loads are 220 VAC then use 220 VAC

as the input voltage.

Note: It is not possible to power the AK110 Chemical Controller with 110 VAC, and control 220 VAC loads or vise versa .

Connecting Power

For cord connected installations wait to plug the cord in as the last step in the installation. For hard-wired installations make sure the circuit breaker is off and turn it on as the last step in the installation. Have a licensed electrician perform the installation to ensure the local codes are met.

WARNINGIf the Controller is connected to 220 VAC the voltage selection switch must be changed

to 220 VAC before connecting power to the unit or damage will occur.

!

ITEM DESCRIPTION LIMIT


Electrical LoadsThe Controller with revision F and greater relay board has the capability of utilizing up to three (3) modular relay boards that can be purchased in a number of configurations. The Controller is shipped from the factory with three (3) 110 VAC Normally Open modules installed (Part# 724000050). Listed below are the different types of relay modules that can be purchased and their function. The correct ones must be ordered based on the load requirements. Check with your distributor for the proper relay modules for your application.

The wiring on each board may be different depending on the model that you purchase. Look on the board, check with your distributor or call Pentair Customer Support at 800-831-7133 with any questions.

WARNINGDo not change relay modules when power is applied. This type of damage is not covered in the warranty.

Do not connect any load not rated for the supply voltage to any of these relays.

TOTAL COMBINED LOADS MUST BE LESS THAN FIVE (5) AMPS FOR ALL THREE RELAYS.

Factory Setting for input power 115 VAC

White = No JumperGrey = Jumper

Setting for input power 24VAC

Dry (Switch)

Part # FUNCTION724000050 For control of 110 VAC Normally Open Circuits (most applications will use this model).

724000060 For control of 110 VAC Normally Closed Circuits.724000440 For control of 110 VAC Single Pole, Double Throw Circuits, with common white and no ground.

Relay Modules

!


Relay 1: Configured for pH control .Relay 2: Configured for ORP control .Relay 3: User configured .

115

RELAY BOARD


Chemical Feed Pump Location

If unit has not been previously installed, follow the instructions included with the chemical feed pump. Some loads include power cords already connected to the load and are ready to plug in. If “pigtails” have been ordered with the Controller simply plug the power cord into the appropriate "pigtail". If "pigtails" are not installed the power cord from the pump will need to be modified. The list below provides installation recommendations:

1. Mount at least 10 feet from open water. 2. Install the pump below the level of the Controller and away from any other equipment or systems. This is to reduce any damage to other equipment should the pump leak. 3. Install close enough to the Controller for the feed pump power cords to reach. 4. If "pigtails" are included simply plug in the pumps to the appropriate "pigtail". If pigtails are not installed, cut the electric plugs from the feed pumps and strip and ferrule the ends. 5. Route the power cords to the Controller through the lower fittings and attach to the appropriate relay terminals on the relay circuit board. If the wire ends were striped and not ferruled make sure that no frays of wire are out of the connector as this may lead to a short. 6. Conduit or external plugs can also be used (according to the codes in the local area). 7. When installing metal conduit into the Controller, a ground LUG should be used to connect the conduit to the relay board ground.

Heater InstallationThe Controller third relay can control a heater, turning it on and off based on the temperature settings you have programmed in to the Controller. The heater control portion of the Controller can be used to maintain a constant temperature or maintain a temperature during operating hours. Even though the Controller is a very accurate and reliable device, for safety, always use the over-temp device on your heater to prevent overheating.

1. Always install any heater according to the manufacturer's instructions.

2. Mount the Controller at least 10 feet from open water.

3. Install close enough to the Controller for the wiring connections to reach.

4. DO NOT attempt to power the heater with the Controller controller.

5. A heater unit must always be independently powered, either through a separate cord, or through an external relay like the Acu-Trol HAR1 relay module. (Part# 735000060)

6. Always use the over-temp device on the heater to prevent overheating.


Follow the instructions that came with the AK1200 flow cell. This section gives the basic principles to be applied for any specific installation, which are listed as follows:

1. Turn OFF all equipment including the filtration system.

2. Determine a suitable location for the flow cell. Which should be located where water spillage will not damage surroundings.

3. Securely mount the flow cell.

4. Install the supply and return lines for each flow cell. Drill and tap ¼” holes for the ½” flexible tubing or hard plumb the flow cell.

A. Locate where the water will be supplied from and returned for each flow cell. The most common location for the water inlet to the flow cell is after the main filter and the outlet after the heater. B. If there is no suitable location the cell inlet can be after the main pump and the outlet before the main pump. This method may cause a suction in the flow cell and damage to the sensors. If any chemicals are injected into the cell they may cause temporary invalid readings.

5. Locate the chemical injection points.

6. Prepare and install the chemical injector fittings.

7. Install the chemical storage containers.

8. Install the sensors.

9. Turn ON the main circulation pump.

10. Check for leaks and verify the flow sensor indicates flow.

Plumbing Installation

WARNINGBe sure to have a licensed plumber perform all plumbing; this is important, as they will

be familiar with all of the codes in the local area.

!


Re

turn

Sup

ply

Water Sample

Test

Plumbing Installation

WARNINGDo not inject acid directly in to the AK1200 flow cell.

Injecting acid in this way may damage the existing pool equipment.

!

Preferred Plumbing Routes

Pump

Pool


SECTION 3 HARDWARE

Modules are the electronic controls and components that make up the Controller. Each module has a specific function or functions that tell the Controller what information to accept and what information to display. The modular design of the Controller enables it to interface with many types of modules including Sensor, Communication, and Relay modules.

Sensor modules determine the types of sensors signals the control can recieve. There are three sensor modules currently available for the Controller.

AK111: pH, ORP, temp and heater control. Calculated PPM can also be displayed (Part# 724000010).

AK112: pH, AKColor(PPM), heater control (Part# 724000380)

AK113SC: pH AKColor(PPM) ORP, Temp (Part # 725000390)

The Controller has the ability to work with several types of communication modules. The Controller can communicate with a PC through an RS232 cable, a standard modem, or a wireless modem.

Controller Modem: High-speed modem. (Part # 725000010)

Wireless Modem: The wireless modem allows the Controller to be accessed over the internet from any PC. Wireless modems are a perfect solution for installations without phone lines. Please note that the wireless modem and the standard modem can not be installed in the same Controller.

The Controller is able to automate nearly any device in your pump room. The Controller uses a relay module to turn electricity to the device on and off. Each Controller can control up to 3 relay modules. Each relay module can control one device. Relay modules are available in seven different models. The type of relay module used depends on the load requirements of the device that is controlled with the relay module. To determine the load requirements, please consult the instruction manual or the device manufacturer. Any combination of the seven models of relay modules can be installed in the three available slots on a relay board, as long as the combination does not exceed the combined maximum current for the relayboard. The combined maximum current for any individual relay board is 5 amps.

Modules

Sensor Modules

Communication Modules

Relay Modules


The maximum relay current for the relay board is 5 amps when switching 115 VAC or 220 VAC and 1 amps when switching 24 VAC.DRY

CONTACTS: These relays act as a dry contact switch only and have no connection to the input VAC. The relay ratings are 5A and 250 VAC.

115 VAC Normally Closed: These relays supply the input voltage to the load when the relay is in the “OFF” mode. Note that both VAC inputs are controlled by the relay. The relay ratings are 5A and 250 VAC.

115 VAC Normally Open: These relays supply the input voltage to the load when the relay is in the “ON” mode. Note that both VAC inputs are controlled by the relay. The relay ratings are 5A and 250 VAC.

115 VAC SPDT: These relays are hard-wired selectable to be either NO (Normally Open) or NC (Normally Closed) switching of the input voltage. They are always powered, and the wiring will dictate whether the power flows in the on or off position. The relay ratings are 5A and 250 VAC. The neutral is common for both NO and NC.

24 VAC Normally Closed: These relays supply 24 VAC to the load when the relay is in the “OFF” mode. Note that both VAC inputs are controlled by the relay. The relay ratings are 1A and 250 VAC.

24 VAC Normally Open: These relays supply 24 VAC to the load when the relay is in the “ON” mode. Note that both VAC inputs are controlled by the relay. The relay ratings are 1A and 250 VAC.

24 VAC SPDT: These relays are hard-wired selectable to be either NO (Normally Open) or NC (Normally Closed) switching of the 24 VAC. They are always powered, and the wiring will dictate whether the power flows in the on or off position. The relay ratings are 1A and 250 VAC. The neutral is common for both NO and NC.


SECTION 4 AK1200 FLOW CELL

Remove flow cell from shipping carton and make sure all parts are included with AK1200 flow cell. • 1 – AK1200 Lid • 1 – AK1200 Jar with O-Ring• 1 – Flow switch magnet • 3 - ¼” Valves.• 1 - Sample barb fitting • 4 - ¼” NPT by ½” flex fittings.• 1 - Filter assembly with O-Ring • 2 - ¼” plugs. • 1 - Flow switch with O-Ring, 2’ • 1 - ¼” Close Nipple and 10’ wire lengths available. • 1 - Teflon Tape • 2 - Mounting screws

Note that ½” flexible tubing is not included and is supplied by the installer or may be ordered from Acu-Trol.

AK1200 Flow Cell


1. Wrap all four flex fittings with Teflon tape. 2. Install two flex fittings into two ball valves.3. Wrap barb fitting with Teflon tape. Install barb into remaining ball valve.4. Wrap both ends of the close-nipple with Teflon tape. Install into the filter assembly using (either end OK). Hand-tighten only.5. Install one ball valve into the filter.6. Install the filter and remaining ball valves as shown in the figure.7. Verify that the flow switch magnet is in the flow cell tube with the large or hat end pointing down.

NOTE: Wrap fittings only twice around with Teflon tape.

Flow Cell Assembly

Select a suitable location for the flow cell meeting the following recommendations:

1. Sensors wires will connect to within ten (10) feet. 2. Do not mount in direct sunlight. SUNLIGHT WILL CAUSE INACCURATE READINGS.3. Water leaks will cause damage! Mount where water does not leak and damage other compentents. 4. Mount flow cell vertically with provided screws. 5. Securely fasten all electrical, water and chemical lines. 6. Locate chemical feed pumps and chemical storage tanks in a safe and secure area. 7. Maximum operating pressure = 25 psi 8. Extreme pressure variances may affect readings and can cause damage to the sensors. 9. Avoid installing the outlet before the main pump as the vacuum may damage the chemical sensors.10. Only inject chemicals on the outlet side of the AK1200 Flow Cell 11. Do not over tighten fitting on flow cell top.

1. It is essential that the supply line be at a higher pressure than the discharge line so the water will flow through the cell at a steady rate in the right direction. Installing a ball valve in the main circulation line may be required if the pressure is too low.2. Inlet should be installed after filter and before heater. 3. Exit should be installed after heater and as far away from any equipment as possible.4. Drill and tap at above locations with 7/16” drill and 1/4” NPT tap. Choose a location on a fitting where the pipe enters so you are drilling through both the pipe and fitting to get maximum depth of thread.5. Install ¼” NPT by ½” flex fittings then route inlet and exit lines.

Flow Cell Mounting

Inlet and Exit Lines


1. pH and ORP sensors must remain wet at all times. Install the sensors into the flow cell, HAND-TIGHTEN ONLY and save caps for future use and fill flow cell with water.

2. Route the flow switch wires into the Controller through the strain relief and connect to the Controller. Wire one (either one) to ground and one to the appropriate input switch.

3. Route the chemical sensors into the Controller through the strain relief and connect to the Controller. The sensor wires are labeled and the PLUS AND MINUS POLARITY MUST BE OBSERVED.

4. Turn the main pump on and open the valves to test for leaks and the free movement of magnet. Magnet must be all the way up in order to close the flow switch. 1/4 GPM will push the magnet all the way up.

Sensors

CAUTION The flow switch is a dry contact only (no current).

Use with any other brand Controller VOIDS WARRANTY.

!

WARNING: Make sure all pumps are OFF before drilling into pipes.

Never turn chemical feed pumps ON when both flow cell valves are closed.

!


SECTION 5 SENSORS

The Controller can accept readings from a wide variety of sensors. The sensors the Controller can read depends on the sensor module installed in the Controller. Each sensor has its own unique circuitry that is connected directly to the micro-Controller for measurement. Isolation of each sensor ensures more accurate measurements.

The Controller measures the following sensor measurements with the listed characteristics: pH - Range: 4.22 to 9.78

ORP - Range: 0 to 999 mV

Temperature - Range: 32 to 212 °F Flow Switch: This input measures if a switch is open or closed.

pH and ORP Sensors

WARNINGSensors are shipped with a protective cap covering the electrode tip to protect

the sensing element. Sensors should be kept in the protective cap until ready for installation, if the sponge in the boot becomes dry, wet it with pool water.

Before using the sensor remove the cap.

!

pH electrodes sense the acidity of the water and work with any acid or base. The blue bands on the cables identify the pH sensors. The red bands on the cables identify ORP sensors. Each sensor is also identified on the sensor body. ORP electrodes are used to monitor the Oxidation Reduction Potential (ORP is sanitization quality of the water) of a given solution. The sensing element of the ORP electrode is made of a precious metal such as platinum or gold.

THE POLARITY (+ AND -) OF THE pH AND ORP SENSORS MUST BE OBSERVED. The ORP sensor (+) copper and the pH sensor (+) copper, and the green leads are (-) polarity labeled. Leave excess wire outside the Controller enclosure. If the cable is longer than needed, it should be coiled neatly and attached under the Controller enclosure.

DO NOT CUT THE SENSOR WIRES. Do not stuff excess wire inside the controller as this may cause excess strain

on sensor and relay connections.


If you have an ORP sensor module you can choose to operate the AK110 in Calculated PPM (Parts Per Million) mode. When in Calculated PPM mode, the Controller uses a special formula to convert the ORP reading from the sensor in to PPM units. To activate the Calculated PPM mode, select "PPM, Mix Time" or "PPM, Cycle Time" in the wizard section. Note when you are in Calculated PPM mode ORP will not be displayed on any screens. See page 78 for PPM Cycle time menu tree.

The AKCOLOR is a colorimetric method chlorine analyzer designed to work in conjunction with most Acu-Trol® Controllers. The AKColor is capable of measuring the amount of free chlorine present in a body of water. The colormetric method of measuring PPM is superior to other methods because it is much less sensitive to varying water conditions, including pH and salinity. The information gathered by the AK Color can be used to control chemical feed pumps and signal alarm conditions. For more information on the AKColor please see Navigation Screen on page 128 or consult your AKCOLOR installation manual.

AKColor PPM Sensor

Calculated PPM

The Controller has the capability of measuring two flow switches in which one or both can be a digital flow sensor. These inputs are general purpose and can measure any dry contact switch state. This can include flow, pressure, temperature, digital flow rate and so on. The typical uses for the flow switches are:

Switch 1: Typically used to indicate flow through the flow cell and it is OK to feed chemicals. If a digital sensor is used the actual flow rate can be measured and displayed in gallons/liters per hour.

Switch 2: Can be used to measure water level for automatic level control. If a digital sensor is used the actual flow can be measured and displayed in gallons / liters per hour.

The AK10K sensor can be installed to measure/display temperature. The sensor should be installed as close as possible to where the water comes from the pool. If a temperature probe is installed in the AK1200 flow cell there will be a temperature variation due to the long tubes and the temperature in the pump room. A common place to install it is in the small plugged hole in the bottom of the main pump strainer basket.

The sensor uses a special ¼” NPT fitting to hold the stainless steel sensor. A hole should be drilled (7/16”) and tapped (1/4”) where the water enters the pump room through a fitting to get double the depth to hold the sensor. If installed outdoors make sure to keep it out of direct sunlight. Route the wires into the Controller through a strain relief and connect to the temperature input. The red wire goes to T and the black wire to GND.

Temperature Sensor

Flow Sensors

NOTE: To obtain liters per minute the scale factor must be changed to pulses per liter.


Finishing and Testing the InstallationOnce the Controller system has been installed with applicable sensors and expansion modules the following steps are required for final system finishing and testing.

1. After all wire connections are complete close the panel and tighten the enclosure. 2. Plug in the Controller and turn on the main breaker. Switch the ON/Off switch to ON. Up is ON and down is OFF. 3. Verify that the display is active and displays various introduction/initialization screens. 4. SENSORS: The first screen displays the sensor readings, verify that they are connected properly. Example: pH is within 0.5. This is to verify that the pH is connected to the pH input and the ORP is connected to the ORP input. 5. FLOW: Verify that the flow switch indicates on (S1ON) and the green flow LED is on. Close the valve in the flow cell to stop the flow and verify that the Controller indicates no flow (S1OFF) and the flow LED is off. 6. LOADS: Leave the valve closed (S1OFF) for this part of the test so that the relay programs will keep relays "automatically" off. Press the Right button 1 time to R1 (ph) OFF and press ENTER to "manually" turn on the load, verify that the correct load turns on and press enter to turn it off. Press the down arrow to select the next relay and repeat for the other two relays.

WARNINGDo not rub hard the glass element in the sensor or use sand paper or

other polishing material to clean.

HANDLE ELECTRODE CAREFULLY Sensors contain external and internal glass elements. Do not drop or otherwise

subject the sensor to vibration, physical impact, or freezing conditions. ANY TYPE OF BREAKAGE IS NOT COVERED UNDER WARRANTY.

Contamination of the sensing elements often results in slow response and inaccurate readings. Clean the elements by the following procedures:

pH and ORP Sensors 1. Wash electrode tip in a liquid detergent and water. Carefully use a soft bristled toothbrush to wash the electrode tip and white sensing ring. 2. Rinse after cleaning. To install, place in flow cell according to the diagram and hand tighten. 3. Make sure the O-ring is installed on sensor. 4. If the cable is longer than needed, it should be coiled neatly and attached under the cabinet. pH Sensors Only 5. Attempt to clean the sensor with liquid detergent first. 6. If this is not successful, swirl the tip of the sensor in a 5 parts water and 1 part muriatic acid solution for 10 - 20 seconds. 7. Rinse again and reinstall.

Sensor Care

!


SECTION 6 OPERATION

Window Navigation

This section introduces window navigating and how to edit and modify the Controller settings and programs using guidelines and examples for selecting and changing items.The Controller provides two main screens for user operations:

1. Display Screen: for monitoring measurements, calibrating and manually turning on relays. This is the list that displays at startup.

2. Menu List: for editing and setup of parameters.

Alarm Indicator Lights

Light is lit when a warning or alarm condition occurs .

FLOW INDICATOR LIGHTS

Flow is on when light is lit .

ALPHANUMERIC KEYPADUsed to enter numeric parameter settings, alphabetic charac-ters, and special shortcuts for commonly used menus .

ARROW BUTTONSUp/ Down/ Left/ Right arrow buttons move you

through the AK110's menus .

SECURITY INDICATOR LIGHT

Light is lit when password protection is active .

POWER INDICATOR LIGHT

Power is on when light is lit .

FLOW

ALARM

POWER

SECURITY

Made in USA110/220 VAC. 5A Disconnect Power Source Before Servicing Unit

AK110

87 954 621 3

Back0 Enter

>Name:Main PoolSystemProgrammingServiceData ( 8:441 )CommunicationsSecurity SetupWizardsSerial # 123456

Configuration Menu Screen

pH > 7.67-OFF 7.50sORP 490 -OFF 700s_____69.0f SW1OFFSW2OFF

Main Status, cursor at pH value


NOTEChanges must be saved by pressing the final ENTER.

If ENTER is not pressed as the last step the changes with not be saved.

To change a parameter move the cursor to the parameter and press the ENTER key. The Controller will then open the value entry screen for that parameter. The Controller navigation system uses the following considerations:

1. Use the right and left arrows to change to a different digit to enter.

2. Press a number on the keypad to change a digit.

3. Press the left button to add a digit and make the number bigger.

4. Press the ENTER button to save the change.

Selecting Items in the WindowsThe 16-button touch pad is used to access and modify the different Controller functions:

• Pressing the BACK button on the touch pad will move back one window.

• Pressing the BACK button will toggle between DISPLAY SCREEN and MENU LIST. If the "RED security light" is on a password must be entered to access MENU LIST.

• Pressing the arrow buttons will reposition the cursor on the screen. The UP or DOWN arrow buttons will scroll up or down the screens and the RIGHT and LEFT will move arrows to the RIGHT and LEFT on the screen

See page 48 for more detailed navigation instructions.

MAKING CHANGES

WARNINGPress 16 Button touch pad with finger pads only. A sharp object such as a

pen or tool will damage button pads.

!


Initializing the AK110PS Pool and Spa Chemical ControllerDuring power-up the Controller will display the Power Up Screens for a few seconds before defaulting to the Display Screen. During this Power On Self Test mode, the Controller will perform a brief check of its internal systems and initialize the internal (RAM) memory for Controller operation. Next the Controller will auto detect for the various installed modules and indicate which ones are detected. The opening screen includes the software version number and will be required when requesting support. When turning on a number will be displayed in the lower left corner of the display screen indicating how many seconds until control will actually start. This is to allow time for the sensor readings to stabilize.

Power Up Screens

Display ScreenDisplay Screen: Displays measurements of connected sensors and also relay status. To the right of the Sensor read-ings are also displayed the set point values. To change set points you will need to go to programming and change them there. Pressing the Up Arrow key when the curser is at the top of the readings screen will move you back to the opening screen.

The following steps need to be performed to properly setup the Controller: 1. Perform any required calibrations. 2. Decide to use mixing time control or cycle time control. 3. Set up the timing parameters based on the size of the water and chemical feeding system. 4. If the AKRTC (Real Time Clock) module is installed set the time, date and weekday. (Part # 724000280) 5. Set the overfeed time limits in programming. 6. Return as needed to recalibrate any changes to the settings 7. If the AK540 modem (Part# 725000010) is installed, then set the number of rings to answer on and setup the paging conditions.

Start Up


The temperature sensor is very accurate and should not require calibration. If the calibration is more than a couple degrees off there may be an installation problem. The most common problems with temperature sensors are listed below:

1. The most common temperature problem is the temperature is not the same at the sensor as it is in the main body of water. It is also possible the temperature error is different depending on the time of day. Make sure the sensor is not in direct sunlight, and is installed as far into the fitting and as close as possible to the body of water. Evaluate where the sensor is installed.

2. The sensor may be damaged. If the sensor is put in a room of 76°F the resistance should be 10,000 OHM's that can be measured with a standard voltmeter. To calibrate the temperature sensor move the cursor in front of the temperature reading and press ENTER. Enter the measured value. Press ENTER again to save the calibration change.

Calibration: Position the cursor to the left of any of the three measurements and press ENTER to calibrate that sensor. A value entry screen will then be opened. Enter the calibrated value with the numeric key pad. To save your change and exit the value entry screen, press the enter button. To clear a specific calibration press "0" on the touch pad when the cursor is in front of the value (The reading may not go to a zero reading but it will default to the sensors uncalibrated reading).

Manually turn on relays: The relays in the Controller are represented on the display screen next to its corresponding sensor reading. Position the cursor to the left of the status word (either OFF or ON) and press ENTER to toggle the relay on and off. The length of time the relay is on is adjustable in the programming. When the relay is toggled to off the relay immediately goes back to automatic control and in some cases may turn back on immediately.

The Display Screen

The DISPLAY SCREEN shows all the current measurements, as well as the user programmed set points. It allows access to specific types of information including the current measurements. Press the arrows on the touch pad to scroll up or down or left or right as indicated by moving the > Cursor on the screen.

Calibrating Temperature

Calibrating pHMeasure the pH using a standard test kit by taking several readings and averaging the results. To calibrate the pH sensor move the cursor to pH and press ENTER. Enter the value obtained from the test kit in to the value entry screen. Press ENTER again to save your changes.

Main Status, cursor at pH Relay

pH 7.67>OFF 7.50sORP 490 -OFF 700s_____69.0f SW1OFFSW2OFF


WARNINGAlways make sure the pH is at the set point before calibrating ORP. Always control

at PPM levels greater than 1.0 PPM when using ORP sensors.IMPORTANT:

For best results the ORP should be at the ORP set point when calibrating.For best results the PPM should be at the desired level when calibrating ORP.

Calibrating ORP

Measure the current PPM using a standard test kit. Calibrating ORP is intuitive and takes a little practice. The following table can be used to improve the accuracy of the calibration. Follow the recommendations in the table and within a few days the PPM should be on track. The values of interest are:

Measured PPM: The hand measurement.

Desired PPM: The actual PPM that is desired in the pool.

ORP: The value of ORP that is displayed on the screen.

ORP Set point: The value of ORP that the Controller is trying to achieve.

Hand PPM ORP Display Action

Low Above hand check

Calibrate to hand check measurement: 10mV per each PPM Low

At hand check Review Setpoints: May need to increase chemical feed times

Below hand check

Calibrate to hand check measurement: 10mV per each PPM Low

Perfect Above hand check

May need to decrease chemical feed times & calibrate to hand check

At hand check No changesBelow hand check

Calibrate to the hand check

High Above hand check

May need to decrease chemical feed times & calibrate to hand check

At hand check Lower the set pointBelow hand check

Calibrate to hand check measurement: 10mV per each PPM High

!


Calibrating ORP EXAMPLE 1: The default set point is 700, the PPM hand measurement is 1.0 (2.0 PPM desired), and the current

display shows a measurement of 690 mV. From the above table the hand PPM is low and the ORP is below the set point. The chemical feed times are not high enough for the ORP to reach the set point and should be increased.

EXAMPLE 2: From example 1 change the hand measurement to 4.0 PPM with ORP reading 700mV. From the above table the hand PPM is high and the ORP is below the set point. The ORP should be calibrated to 700 + (4.0 – 2.0) * 10 = 720.To compare ORP measurements to PPM measurements per actual pH readings refer to

Calibrating Calculated PPMIf you have an ORP sensor module and Calculated PPM mode selected. You can calibrate the Calculated PPM in the following manner. Measure the PPM using a standard test kit. To calibrate the PPM, move the cursor to PPM and press ENTER. Enter the value obtained from the test kit in the value entry screen. Press ENTER again to save your changes.

MANUAL RELAY CONTROL

Display ScreensPosition the cursor to the left of the status word and press ENTER to toggle the relay on and off. The length of time the relay stays on is adjustable in the programming. When the relay is toggled to OFF the relay immediately goes back to automatic control and in some cases may immediately turn back ON.

WARNINGAlways make sure the pH is at the pH setpoint and PPM is greater than

1.5 PPM before calibrating calculated PPM. Always control at PPM levels greater than 1.0 PPM when using

ORP sensors.

NOTE You can enter the password 9003 to see the ORP and adjusted ORP being used for calculated PPM. These ORP values will only be displayed for four

(4) seconds.

!

Main Status, cursor at pH Relay

pH 7.67>OFF 7.50sORP 490 -OFF 700s_____69.0f SW1OFFSW2OFF


To use a switch as a digital flow switch you must first set it up. To enter the setup screen from the DISPLAY SCREEN move the cursor to the switch "SW_" to be setup and press ENTER. You can enter the number of pulses per gallon from 1 to 999.9. This second method should only be used for flow meters that generate less than one pulse per gallon. The highest volume that can be accumulated from the flow rate is 65,535 gallons. Flow can also be displayed in g/pul and Piezo.

NOTE: Switch 1 is the default flow switch for relay control and should not be used for digital flow if switch 2 is available.

The Relay Timer display indicates the present status of the 8 timers used in the Controller. The most common use for this screen is to perform diagnostics on a specific relay or to see how long a relay has been on. From the DISPLAY SCREEN press the right arrow button twice. Press the left arrow button to return to readings screen.

RELAY TIMER DISPLAY

Note: To reset the relay timers to zero use the right button to scroll the cursor beside the information that you want to reset and then press the ENTER button. • TMR: Displays relay timer. Shows time remaining for relay on time. This timer will be counting with off and on cycles. Counting down when ON cycle, counting up when OFF cycle. • TD: Displays the time the MPS has been ON for the current day (ToDay).• CNT: Total number of relay cycles since last reset.• S: Set overfeed timer, length of relay on time without reaching set point.• STS: Status of relay ON, OFF, Set Point Overfeed(SOV), Overfeed(OVF), and Disable (DIS).• TOT: Displays the total time the MPS has been ON since last reset in hours:minutes.

SETUP FLOW

NOTE: If k = 0 than g/m = and Total = will not be displayed on the screen.

Timer Screen, Relay 1 (pH)

pH, Mix TMR00:00:00 >TD00:00:00CNT: 0 S 00:00:00STS:OFF TOT 0:00

Flow Switch 2 Setup

Flow Switch #2SW2 K => 8.5 pul/gg/m = 35Total = 256 Clear


The Configuration Menu consists of the following:

• Name: Sets up the name of your aquatic system for easy identification during communication and on the wireless data management system. See pages 56 for Controller Name Navigation Menu Tree.

• System: Sets up time, date, weekday, and unit display (English or Metric). See pages 58 or System Set-up Screen Navigation.

• Programming: Relay programming for Relays 1, 2, 3, Alarm, and Pagers. See Programming Section for details. See pages 52-109 for Programming Set-up Menus.

• Service: Clear calibrations, data, or relay timers as part of normal service operations.

• Data: Sensor readings are recorded at a default 2 hours into data. A total of 441 lines of data can be stored. Press the down arrow key to view data. See page 114 for Data Screen Navigation.

• Communications: Set up modems, pager numbers and or email addresses. See pages 102-105 for Programming Screen Navigation Pager 1. See page 116 for Communications Screen for Dail-up and Internet Modems. See pages 106 for Programming Screen Navigation Email.

• Security Setup: Sets up passwords, clears passwords, and resets all settings to factory defaults. See pages 126 for Security Setup Screen Naviagtions.

• Wizards: Select pre-written programs for common Controller applications. See pages 110 for Wizards Setup Screen Navigation.

• Serial #: View the serial number here. The serial number is required when requesting support.

Note: When entering pulses per gallon the Controller will only

update this measurement once every 10 seconds.

Configuration Menu

To clear the Total, for any switch place the cursor on Clear and press ENTER.

Configuration Menu Screen>Name:Main PoolSystemProgrammingServiceData ( 8:441 )CommunicationsSecurity SetupWizardsSerial # 123456

Flow Switch 2 Setup, Clear Counter

Flow Switch #2SW2 K => 8.5 pul/gg/m = 35Total = 0 >Clear


Name

The Name Setup submenu allows the system controlled by the Controller to be specifically identified on the Controller and in its communication with other devices. The name of the Controller is particularly useful when using remote communication devices such as the standard and wireless modem. Naming each aquatic system, pool, or spa will make it easier to identify each Controller and verify its location before making modifications to the system.

The alphanumeric characters that make up the system name are entered using the touch-pad. You have a full range of letters, numbers and symbols available to aid you in uniquely identifying each system under your control.

Opens a menu where time, date and day can be changed .

• Time:Timeofday;placecursornexttoTIMEselectENTER to set time in hours, minutes, seconds .

• Date:OptionalwithRealTimeClockModule.(Part#724000280) Date must be set when Real Time Clock is installed . If not installed date with default to 00:00:00 .

• Day:OptionalwithRealTimeClockModule.DaymustbesetwhenRealTimeClockisinstalled. If not installed day with default to 00:00:00 .

• Units:SelecttotogglebetweenMetricandEnglishunits.Whenmetricisselectedthedateisdd/mm/yy, when English is selected the date format is mm/dd/yy .

• Sanitizer:Selectbetween“Cl”(chlorine)and“Br”(bromine).

• OnDelay:PressingEnteronthislineincrements(by15)thenumberofsecondstherelayswillbeoffon power up .

• BacklightTime:SelecttheamountoftimetheControllerscreenbacklightwillbeoneachtimethecontrol panel is activated .

• TempDisplay:Displayswatertemperatureinfarnihietdegrees.Toturntemperaturesensoroff,toggleon/off and select enter .

• ResettoDefault:ReturnsControllertooriginalfactorydefaultsettings.

System


Edit Settings: Place the cursor to the desired location to edit the values. Setting a value equal to zero will disable that command. For example, the Off if Sw Off command is disabled in the program below. To enable this com-mand change the "No" to "Yes".

Below are the edit option screens for pH. Use the up and down arrow to position the curser in front of the option to be edited.

Manual Time: The amount of time the relay will turn on during a manual cycle. This will occur each time the manual cycle is activated.

Proportional: The percentage of the set point where the Controller will begin automatically shortening the length of the feed cycle to prevent the Controller from over shooting the set point. To turn off the proportional feed function, enter "0" as the proportional feed percentage.

Example: 5 is entered as the proportional feed %. This means that the Controller will automatically shorten the length of the feed cycle once the measured reading is within 5% of the set point. If the pH set point is set at 7.50, the proportional feed will begin to limit the feed cycle at 7.87 and continue to shorten the feed cycle each time it feeds until set point is reached. For best results, the proportional feed percentage should be kept between 0 and 5 percent.

Programming

The Programming menu provides sub-menus used to configure and view the three output relays, alarm, and 4 pagers as appropriate. To edit a program use the up and down arrows to position curser and press ENTER.

Programming Setup Screen>>1:pH, Mix Time2:ORP, Mix Time3:Not UsedA:AlarmP:Pager1P:Pager2P:Pager3P:Pager4

pH Mix Time Programming Screen

ManualTime 00:02:00<Proportional% 10On If pH> 7.50On If pH< 0.00Off if RLY On 2On DELAY 00:00:20On Time 00:01:00MinTimeOff 00:05:00Off if Sw1 Off-YESOff if Sw2 On -NOSetOvrfeed 00:00:00Overfeed 01:00:00


Programming On If pH>: Acid Feed: the set point value at which the Controller will begin to feed acid or other pH chemicals to the water source. Set this value to zero if not using acid to control the pH.

On If pH<: Base Feed: the set point value at which the Controller will begin to feed base or other pH chemicals to the water source. Set this value to zero if not using base to control the pH.

Off if RLy on(#): Number of relay (1 or 2) will display. Depending on which relay is on the other relay will remain off. Prevents both relays from coming on at the same time and mixing Chlorine and Muriatic Acid.

On Delay: This is a built in timer which prevents the Controller from prematurely mixing chemicals still in the system or when suction side chemical feeding is used. This prevents the relay from turning on while chemicals are mixing in the system.

On Time: Maximum amount of time that the Controller will dispense chemicals.

Min Time Off: Minimum amount of time that the Controller will be off before it will dispense any more chemicals, regardless of the set point reading.

Off if Sw_Off: Tells the Controller not to dispense any chemicals if this switch number is in an OFF condition. This prevents a large amount of chemicals from being added into the water line as flow of water returns.

Set Point Overfeed: If a relay output is "ON" accumulative for longer than the set point overfeed's maximum time allowed the reading screen will display a “SOV” (Set Point Overfeed) on relay display. (This is to keep the Controller from continuously feeding chemicals in case the sensor has a problem or if there is a clog in the feed tubes or you run out of chemicals). This control condition will automatically reset itself if the sensors set point value is reached.

Overfeed: This value should be set for the maximum accumulated “ON” time that the Controller will be allowed to feed each chemical in a 24 hour period. If the Controller's “ON” time exceeds the total allowed "ON" time within a 24-hour period the Controller will disable the associated feed relay, and not feed any more of that chemical until the overfeed timers are cleared manually, or until the Controller automatically resets the overfeed timers at the end of its 24 hour day. Each relay output used to control a feed system will have its own overfeed settings. Exceeding the overfeed timers can be set to cause an alarm condition. If the overfeed time alarm condition persists over a few days you may need to check the chemical container levels, Controller feeder problems or you may need to increase the overfeed time to a level that will allow the Controller to maintain the water quality levels within your specified limits. If the system does go into an overfeed condition along with the alarm LED coming on, it will also display an "OVR" statement in the display screen, for the relay output that was in an overfeed condition. Overfeed for 01:15:00 or 01:30:00, in case there was a problem with the feeder, chemicals or the sensor that are in overfeed condition, the Controller would disable feed and alert a problem. NOTE: The Controller's Overfeed feature is equivalent to the amount of time the chemical feeders will feed during an alarm condition.

OPR Indicating Overfeed Condition

pH 7.67>OFF 7.50sORP 490 -OVR 700s69.0f SW1OFFSW2OFF

Timer Screen, Clear Overfeed

ORP, Mix TMR00:00:00 >TD01:30:00CNT: 0 S 00:00:00STS:OVR TOT 0:00


To manually reset the Overfeed Timer be sure that the cursor is beside the TD Reading and press the ENTER button.

This will reset the timer to zero.

Programming

All Off 10 min (NO) Press the Enter button to turn all three relays off for 10 minutes. This feature is useful when calibrat-ing. After selecting the display will change to (YES) selecting the line again will remove the "All OFF" condition.

• Clear Calibrations: Clears all previously entered calibrations

• Clear Data: Erases all of the existing data.

• Clear Relay Timers: Resets all timers to zero for all relays.

Service

Sensor readings are recorded every 2 hours into the data log. Up to 12 lines of data can be recorded a day. The Controller will save up to 441 lines of data in its data log. When the data log is full the oldest records will be over written.

The default data log includes the day of operation, the hour sequence, and the sensor readings. When used in conjuction with a real time clock, data includes date and hour and sensor readings. Pressing the down arrow key to view subsequence data.

When downloading the data with a PC the following information will also be displayed:

Title = MPBPF123: Modem, PC RS232, Front Button pressed, Password entered, Flow S1 on, and relays 1-3 status.

Data


The followings are only available if the modem is purchased and installed.

Modem: Sets up the number of rings to answer on and the long hang up time. If you enter the password 9000 you can access the modem diagnostic screen. On the modem diagnostic screen you will see the modem initialization string that was returned by the modem during startup. This string should end with the word “OK” for working modems.

Pager Test: Tests pagers and displays paging status. To test the pagers, simply Press ENTER while in this screen. The screen displays which pager is being paged and its counting down time. If the paged modem (pager company) is not answering, the Controller modem will hang up within 40 seconds, and the modem is reset, ready for the next page. You can press the BACK button at any time to cancel the testing process.

Pager Numbers: Sets up the pager numbers. The programming setup screen will display up to four pager numbers. This will allow the system to page up to four numbers to alert more than one technician when a pool problem arises. The process to enter pager numbers in the AK110 is as follows:1. Press BACK button to reach MAIN Screen. 2. Scroll down to Communications3. Press ENTER to select Communications4. Scroll down to pager numbers and press ENTER to select pager numbers5. Select the #1 pager number location. 6. Using the key pad to enter pager number. Using cursor arrows to move to the next number and so on. (The key pad works exactly like a cell phone key pad and entering information as you would a phone number in your cell phone address book). See AK110 Programming Screen Navigation on page 88 for details on alarms. Make sure to enter the "comma" to allow enough delay time for the modem on the other end to pick up. Each comma is worth 4 seconds of time. Use the 0 button to toggle the ',', '-', and '#' for pager editing. Press ENTER to save the changes. Here is an example for a pager number entry: 18005552222,,9014910,,911#. The actual pager number is your phone number. You determine a code (example: 911 for chemical overfeed) depending on what you want the pager to define as a problem. The string always ends with a ‘#’ sign. If a mistake is made press UP to delete. Press DOWN to abort entry. See AK110 Programming Screen Navigatioin, Pager 1 and 2 for details on page 102.

Pager Setup Screens

Communications


Email Set-up

Email addresses: The programming setup screen will display up to four email addresses. This will allow the system to email up to four addresses to alert more than one technician when a pool problem arises. The process to enter email address in the AK110 is as follows: 1. Press BACK button to reach MAIN Screen. 2. Scroll down to Communications 3. Press ENTER to select Communications 4. Scroll down to Email addresses and press ENTER to select Email addresses 5. Select the #1 email address location. 6. Using the key pad to enter email address. Using cursor arrows to move to the next letter and so on. (The key pad works exactly like a cell phone key pad and entering information as you would a phone number in your cell phone address book). If your email address is to long for the spaces available use the next available email address to com-plete the address. Add "+02" to the end of the address where you need to break to the next line. Example: email 1: johndoe@+02 email 2: myserver.comSee page 106 for more detailed email set-up process.

Security

Up to two levels of security may be implemented on the AK110 Controller. 1. Master Password: The master password enables access to all controller functions and menus. A master password may be implemented alone or in conjuntion with a service password.

2. Service Password: The more limited Service password allows access to sensor calibrations screens from the Main Status Screen. A service password may be implemented only after a master password has been implemented. Passwords consist of up to nine digits. Password restrictions: 1. The password may not be begin with a zero (0) as the first digit. 2. The security password must be in the range of "1" and "8999" and "9011 and "999999999". The numbers 9000-9010 are reserved for technical support purposes and may not be used. 3. A master password is required for should a wireless modem be installed in the AK110.

See page 126 for the AK110 Security Set-up Screen Navigation for more detailed security set-up process.


When leaving an editing screen you will need to confirm the changes by pressing “9” or cancel by pressing press "7". Also after making any changes be sure to press the "Back" button until you reach the main menu screen. Otherwise your changes will not be saved. The following list shows all the "Wizards" available with the Controller:

Control options for pH Relay 1 1. pH, Mix Time – use to control a pH feed system. 2. pH, Cycle Time – use to control a pH feed system. 3. Not Used – use to disable this relay

Control options for ORP/PPM Relay 2 1. ORP/PPM, Mix Time – use to control a sanitizer feed system. 2. ORP/PPM, Cycle Time – use to control a sanitizer feed system. 3. ORP, Cal Hypo - use to control Cal Hypo feed system 4. Not Used - select to disable this relay. 5. PPM, Mix time - use the calculated PPM features 6. PPM, Cycle time, use the calculated PPM features

Control options for Relay 3 1. Not Used - select to disable this relay. 2. Probe Clean - use to introduce acid for a short time to clean sensors. 3. Heater - Used to control temperature with an external heater. 4. Alarm Out - external alarm control. 5. pH, Mix Time - used for additional pH control (i.e. when both Acid and Base are needed. 6. pH, Cycle Time - optional method see program. 7. AUX: Make UP - control a make-up water system (auto fill). 8. Daily - turns on relay once per day 9. Weekly - turns on relay once per day on selected day(s) of the week. 10. ORP/PPM Mix Time - use for additional sanitizer control (i.e. when a liquid feed system is used to back up a salt generator). 11. ORP/PPM, Cycle Time - optional method see program.

Control options for Pager/Email 1-4 1. Pager 1-4/Email 1-4 2. Not Used

See page 110 for the AK110 Wizards Setup Screen Navigation

Wizards


SECTION 7 TROUBLESHOOTING

COMMON PROBLEMS

PART PROBLEM SOLUTION #1 SOLUTION #2Alarm High pH alarm on Increase ON time (CO2)

= slower reaction, needs more time ON.

Check chemical tank and make sure it is not empty.

Flow Cell Magnet will not go up Clean filter on flow cell. Back wash main filter or increase flow.

ORP/pH Probe

Readings bounce Clean probe, check ground on input power.

Reduce flow through flow cell.

Flow Switch Not working Check for magnet. Check for debris in flow cell.

Alarm Overfeed alarm on Increase overfeed time. Make sure feeder is working properly.

Program Relay 1 & 2 not turning ON but work manually

Make sure flow switch is closed. Verfiy that the green flow light is turned on.

Check set points.

The Real Time Clock (RTC) is an optional module (PN# 724000280) that allows time display and time stamps in the data log. The Controller will automatically detect the real time clock when it is installed. The real time clock is battery powered, with a minimum of 5 years battery life.

The Real Time Clock


ORP Calibration Actions

Hand PPM ORP Display Action

Low Above Set point Cal to below set point: 10mV per each PPM Check flow and/or clean sensor. At Set point Cal to below set point: 10mV per each PPM Below Set point May need to increase chemical feed times.

Perfect Above Set point > 6 May need to decrease chemical feed times. Calibrate to the set point. At Set point ±5 No changes Below Set point >6 Calibrate to the set point.

High Above Set point Decrease chemical feed times. At Set point Cal to above set point:10mV per each PPM Below Set point Cal to above set point: 10mV per each PPM Check flow and/or clean sensor.

EXAMPLE: The default set point is 700, the PPM hand measurement is 1.0 (2.0 PPM desired), and the current display shows a measurement of 690 mV. From the above table the hand PPM is low and the ORP is below the set point. The chemical feed times are not high enough for the ORP to reach the set point and should be increased.

To compare ORP measurements to PPM measurements per actual pH readings refer to the calculated PPM chart on page 131.

1. Remove all wires from the sensor card. 2. Insert test strip into the green terminal bar on the sensor card. Match the pH test strip side to the sensor card side 3. Reset the calibrations with the test strip installed. 4. Call Acu-Trol Technical Support at 800-273-4667 with the sensor readings if your results do not match the following readings: ORP 90350-28A pH = 7.65-7.75 ORP = 485-500 Temp = 68.0-71.0 PPM 90350-35A pH = 7.65-7.75 Color = TBD Temp = 68.0-71.0

Using the Test Strip

ORP Troubleshooting


AKColor PPM Troubleshooting

pH Troubleshooting

Problem Solution PPM Reading is 0 or 9.99 1. Check Flow to AKColor Flow Chamber 2. Check Chemical Levels 3. Check Discharge from DPD and Buffer Solenoids 4. Clear Calibrations

Chemical Reagents are being 1. Check sample rate, decrease to 5 min or used too quickly greater. 2. Check the DPD and Buffer solenoids for leaks

Measured PPM Level is lower 1. Check sample flow solenoid for leaksthan the hand check reading 2. Recalibrate the PPM reading with pH at setpoint.

The clear voltage is not 3.5 1. Adjust the potentiometer in the AKColor

Problem Solution pH not reading correctly 1. Use the test strip to verify pH 2. Confirm that the BNC sensor wires are installed correctly 3. Install a new BNC sensor wire. 4. Check the manufacture date of the sensor 5. Confirm that the flow rate in the AK1200 Flow Cell is between 0.5 and 1.5 liters per minute.

pH readings response slow to to changes in the water 1. Confirm that there is flow in the Flow Cell 2. Clean the pH sensor using the Acu-Trol pH sensor or cleaning procedure listed in this manual.

pH readings inaccurate 1. Recalibrate the pH reading


SECTION 8 APPENDIXES

Utility Passwords 9000-9010From the Main Status screen press [4] to enter the password screen. 9001 – Enter once for 1-second data recording rate. Enter a second time for 5-minute data recording rate. To go back to the default 2-hour recording sample rate, power the unit off and then back on. 9003 – When in “Calculated PPM” mode, shows the actual ORP and the adjusted ORP derived from Calculated PPM calibrations.

To use Switch 1 or Switch 2 as a digital flow switch you must first set it up in the flow switch set-up screen. To enter the setup screen from the MAIN SCREEN, move the cursor to the switch “S” to be setup and press ENTER. Enter the number of pulses per gallon from 0 to 999.9. NOTE: Switch 1 is the default flow switch for relay control and should not be used for digital flow if switch 2 is available.

To clear the total accumulate flow counter, place the cursor to CLEAR and press ENTER .

Set Up Digital Flow

The proportional feed value determines the ratio of feed ON time in a cycle. The general principle is that a relay should be on for a reduced amount of time as it nears set point so as to minimize chemical feed overshoot. A lag time exists between the time the chemical feeds and the sensors "read" the new values. Older Controllers would have a relay on continuously which can lead to significant overshooting of the chemical feed. The Controller adjust the ratio based on how far from the set point is from the measurement. The following tables shows examples of feed times for various conditions:

Proportional Feed

Table 3 . ORP Control with the Cycle Time control type . Cycle time = 6 minutes

700 630 10% 00:06:00 00:00:00 00:06:00700 631 10% 00:05:54 00:00:06 00:06:00 700 698 10% 00:00:06 00:05:54 00:06:00 700 665 10% 00:03:00 00:03:00 00:06:00 700 100 10% 00:05:06 00:00:54 00:06:00700 699 10% 00:06:00 00:00:00 00:06:00

SetPoint

Measurement Prop % Actual On Actual Off Cycle


SECTION 9WIRING DIAGRAMS

Back View of the Switch

Black wire from Green Terminal

Bar

White wire from Green Terminal

Bar

Black wire to Power Supply

White Wire to Power Supply

Normally Open (NO) Relay

Green Wire To GNDBlack Wire to NOBWhite Wire to NOW

Normally Closed (NC) Relay (Optional)

OR

Green Wire to GNDBlack Wire to NCBWhite Wire to NCW

White to Power Supply

Black to Power SupplyGround

Sanitizer FeedPump

AcidFeedPump

Use Optional Acu-Trol Pigtails

or Gangbox

To 110 VAC Outlet

Relay Wiring Diagram


Sensor Wiring Diagram

AK110PS Chemical Controller Top View

Control Board Green Terminal Bar

ORPSensor

pHSensor

Flow Switch

+12

GN

DSw

itch

2Sw

itch

1G

ND pH

-

pH +

ORP

-

ORP

+

GN

D

TEM

P

pH Sensor Wires = Green to pH -= Copper to pH +

ORP Sensor Wires = Green to ORP - = Copper to ORP +

Flow Switch Wires = Red to GND= Black to Switch 1

Sensor Card Green Terminal Bar

AK110PS Chemical Controller Bottom View


pH > 7.67-OFF 7.50s ORP 490 -OFF 700s _____ 69.0f SW1OFFSW2OFF

Main Status Screen

>Name:Main Pool System Programming Service Data ( 8:441 ) Communications Security Setup Wizards Serial # 123456

Configuration Menu, Controller Name

AK110 Controller Name Screen Navigation

Back

Controller Name Setup Screen

Use the AK110 keypad to enter in anew controller name. The controllername may consist of a maximum of14 alphanumeric characters.Press the down arrow key to returnto the configuration menu.

Using the AK110 Keypad to Name the Controller

1Main Pool U v-Cancel Back-Ins

Enter



Each numeric key is associated with threeor more letters of the alphabet, or withpunctuation and other special characters.

Successive keypresses cycle through thevarious characters associated with eachkey. For instance, press the [5] key onceto display the number "5" on-screen.Press it a second time (while the cursor isin the same position) to display the letter"J". The third keypress displays the letter"K" and the fourth keypress displays theletter "L". Press the key one more time toreturn to the number "5".

Each of the arrow keys as well as the[Back] and [Enter] keys perform specificfunctions within the Controller NameScreen.

Press the up arrow key to delete thecharacter at the cursor position.Press the left arrow key to move thecursor one space to the left.Press the right arrow key to move thecursor one space to the right.Press the down arrow key to cancel out ofthe controller naming process.Press the [Back] key to insert a blankspace at the cursor position.Press the [Enter] key to confirm thecontroller name as displayed on-screen.

Moving the Cursor

Controller Name, Upper Case Text Controller Name, Lower Case Text

Controller Name, Cursor to Right

1main Pool u v-Cancel Back-Ins

To change between upper case and lower case letters, press the left arrow key until thecursor is in the leftmost position, then press the left arrow key once again. The letter"U" in the lower right corner of the display indicates whether subsequent text enteredwill be lower case or upper case.


Controller Name, Cursor to Left

An upper case "U" in the lower rightcorner of the display indicates thatletters entered in via the keypad willbe displayed in upper case.

A lower case "u" in the lower rightcorner of the display indicates thatletters entered in via the keypad willbe displayed in lower case.

The cursor position is indicated bythe character "1" located directlyabove the first character in thecontroller name.Press the right arrow key to movethe cursor one space to the right.

The cursor has moved one space tothe right and is now positioneddirectly above the second characterin the controller name.Press the left arrow key to return thecursor to its previous position.

Changing between Upper and Lower Case Letters

T U V8 9

W X Y ZP Q R S7

G H I4

J K L5

M N O6

A B C2

D E F3

!$% &̂*+1

,-#.@_0

Confirm

ENTERBACKInsert

LEFT

RIGHT

DELETE

CANCEL

AK110 Controller Name Screen Navigation, Rev 3 21 Aug 2008

SECTION 10MENUS

SCREEN NAVIGATION KEYS

For basic Controller operations, follow the screen navigation keys. The arrows guide you to each level and provide you examples of the information based on the condition of your pool. The actual information on the Controller screen will differ from the menu examples. The LCD back-light turns off following a user-defined period of inactivity. Press any key to turn the on back-light. The LCD screen displays 4 horizontal rows at a time. Many menus consist of five or more lines.

Use the up or down arrow keys to navigate through longer menus to display additional menu options on-screen.PLEASE CALL 800-831-7133 FOR TECHNICAL ASSISTANCE.

NOTE:The keypads on the mounted AK110 Chemical Controller do not have the letter of the alphabet

or numbers printed on the keypad. The some models curser keys do not have "Delete", "To Right", "Cancel"

or "To Left" printed on the keys.

Press "ENTER" at the end of each

programming session to save the

changes. If "ENTER" is not pressed the AK110 will default back to

the original saved changes.

46

Acu-Trol, SN123456

Swimming Pool

Automatic Controller

AK110E7, 07/22/08

Ver

sion

Con

trol

Scr

een

pH

> 7.67-OFF 7.50s

ORP 490 -OFF 700s

_____

69.0f SW1OFFSW2OFF

Mai

n S

tatu

s, cu

rsor

at p

H v

alue

pH 7.67-OFF 7.50s

ORP> 490 –OFF 700s

_____

69.0f SW1OFFSW2OFF

pH 7.67-OFF 7.50s

ORP 490 –OFF 700s

_____

>69.0f SW1OFFSW2OFF

pH 7.67-OFF 7.50s

ORP 490 –OFF 700s

_____

69.0f >W1OFFSW2OFF

Mai

n S

tatu

s, S

witc

h 1

Sta

tus

Mai

n S

tatu

s, S

witc

h 2

Sta

tus

pH 7.67-OFF 7.50s

ORP 490 –OFF 700s

_____

69.0f SW1OFF>W2OFF

Enter new value

Current: 7.67

7.67

v-Cancel ^

Cal

ibra

tion

Scr

een,

pH

Enter new value

Current: 490

490

v-Cancel ^

Cal

ibra

tion

Scr

een,

OR

P

pH 7.67>OFF 7.50s

ORP 490 -OFF 700s

_____

69.0f SW1OFFSW2OFF

Mai

n S

tatu

s, p

H R

elay

is O

ff

pH 7.67>ON 7.50s

ORP 490 -OFF 700s

_____

69.0f SW1OFFSW2OFF

Mai

n S

tatu

s, p

H R

elay

turn

ed O

n

pH 7.67-OFF 7.50s

ORP 490 >OFF 700s

_____

69.0f SW1OFFSW2OFF

Mai

n S

tatu

s, O

RP

Rel

ay is

Off

pH 7.67-OFF 7.50s

ORP 490 >ON 700s

_____

69.0f SW1OFFSW2OFF

Mai

n S

tatu

s, O

RP

Rel

ay tu

rned

On

Enter new value

Current: 69.0

69.0

v-Cancel ^

Cal

ibra

tion S

cree

n, T

empe

ratu

re

Flow Switch #1

SW1 K => 0.0 pul/g

Clear

Flow

Sw

itch

1 S

etup

Flow Switch #2

SW2 K => 0.0 pul/g

Clear

Flow

Sw

itch

2 S

etup

Ent

er

Bac

k

Ent

er

Bac

k

Mai

n S

tatu

s, c

urso

r at

OR

P v

alue

Mai

n S

tatu

s, c

urso

r at

Tem

pera

ture

"Any

"K

ey

>Name:Main Pool

System

Programming

Service

Data ( 8:441 )

Communications

Security Setup

Wizards

Serial # 123456

Con

figur

atio

n M

enu

Scr

een

Ent

er

Ent

er

Ent

er

Bac

k

Ent

er

Ent

er

AK

110

Mai

n S

tatu

s S

cree

n N

avig

atio

n (1

of 2

)

Use

the

keyp

ad to

ent

er th

eca

libra

ted

pH v

alue

.Pr

ess t

he [E

nter

] key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

Use

the

keyp

ad to

ent

er th

eca

libra

ted

OR

P va

lue.

Pres

s the

[Ent

er] k

ey to

con

firm

or

the

dow

n ar

row

key

to c

ance

l.

Use

the

keyp

ad to

ent

er th

eca

libra

ted

Tem

pera

ture

.Pr

ess t

he [E

nter

] key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

Pres

s the

[Ent

er] k

ey to

man

ually

turn

the

cont

rol r

elay

on o

r off

. If

no fl

ow is

det

ecte

d, a

war

ning

/ve

rific

atio

n sc

reen

will

firs

t app

ear.

Pres

s the

[Ent

er] k

ey to

man

ually

turn

the

cont

rol r

elay

on o

r off

. If

no fl

ow is

det

ecte

d, a

war

ning

/ve

rific

atio

n sc

reen

will

firs

t app

ear.

Bac

k

Bac

k

Not

e:Th

e LC

D B

ackl

ight

turn

s of

f fol

low

ing

aus

er-d

efin

ed p

erio

d of i

nact

ivity

. Pr

ess

any

key

to tu

rn th

e bac

klig

ht o

n.

The

LCD

scre

en d

ispl

ays

4 ho

rizo

ntal

row

s at a

tim

e. M

any m

enus

con

sist

of 5

or m

ore

lines

. Us

e th

e up

and

dow

nar

row

key

s to

navi

gate

thro

ugh

long

erm

enus

to d

ispl

ay a

dditio

nal m

enu

optio

nson

-scr

een.

ToTi

mer

Scr

een,

pH

. R

efer

toAK

110

Rela

y an

d Al

arm

Tim

erSc

reen

Nav

igat

ion

ToTi

mer

Scr

een,

pH

. R

efer

toAK

110

Rela

y an

d Al

arm

Tim

erSc

reen

Nav

igat

ion

AK

110

Mai

n S

tatu

s S

cree

n N

avig

atio

n, R

ev 3

21 A

ug 2

008

10.1

47

Acu-Trol, SN123456

Swimming Pool


AK110E7, 07/22/08

Ver

sion

Con

trol

Scr

een

pH

> 7.67-OFF 7.50s

ORP 490 -OFF 700s

_____

69.0f SW1OFFSW2OFF

Mai

n S

tatu

s, cu

rsor

at p

H v

alue

pH 7.67-OFF 7.50s

ORP> 490 –OFF 700s

_____

69.0f SW1OFFSW2OFF

pH 7.67-OFF 7.50s

ORP 490 –OFF 700s

_____

>69.0f SW1OFFSW2OFF

pH 7.67-OFF 7.50s

ORP 490 –OFF 700s

_____

69.0f >W1OFFSW2OFF

Mai

n S

tatu

s, S

witc

h 1

Sta

tus

Mai

n S

tatu

s, S

witc

h 2

Sta

tus

pH 7.67-OFF 7.50s

ORP 490 –OFF 700s

_____

69.0f SW1OFF>W2OFF

Enter new value

Current: 7.67

7.67

v-Cancel ^

Cal

ibra

tion

Scr

een,

pH

Enter new value

Current: 490

490

v-Cancel ^

Cal

ibra

tion

Scr

een,

OR

P

pH 7.67>OFF 7.50s

ORP 490 -OFF 700s

_____

69.0f SW1OFFSW2OFF

Mai

n S

tatu

s, p

H R

elay

is O

ff

pH 7.67>ON 7.50s

ORP 490 -OFF 700s

_____

69.0f SW1OFFSW2OFF

Mai

n S

tatu

s, p

H R

elay

turn

ed O

n

pH 7.67-OFF 7.50s

ORP 490 >OFF 700s

_____

69.0f SW1OFFSW2OFF

Mai

n S

tatu

s, O

RP

Rel

ay is

Off

pH 7.67-OFF 7.50s

ORP 490 >ON 700s

_____

69.0f SW1OFFSW2OFF

Mai

n S

tatu

s, O

RP

Rel

ay tu

rned

On

Enter new value

Current: 69.0

69.0

v-Cancel ^

Cal

ibra

tion S

cree

n, T

empe

ratu

re

Flow Switch #1

SW1 K => 0.0 pul/g

Clear

Flow

Sw

itch

1 S

etup

Flow Switch #2

SW2 K => 0.0 pul/g

Clear

Flow

Sw

itch

2 S

etup

Ent

er

Bac

k

Ent

er

Bac

k

Mai

n S

tatu

s, c

urso

r at

OR

P v

alue

Mai

n S

tatu

s, c

urso

r at

Tem

pera

ture

"Any

"K

ey

>Name:Main Pool

System

Programming

Service

Data ( 8:441 )

Communications

Security Setup

Wizards

Serial # 123456

Con

figur

atio

n M

enu

Scr

een

Ent

er

Ent

er

Ent

er

Bac

k

Ent

er

Ent

er

AK

110

Mai

n S

tatu

s S

cree

n N

avig

atio

n (1

of 2

)

Use

the

keyp

ad to

ent

er th

eca

libra

ted

pH v

alue

.Pr

ess t

he [E

nter

] key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

Use

the

keyp

ad to

ent

er th

eca

libra

ted

OR

P va

lue.

Pres

s the

[Ent

er] k

ey to

con

firm

or

the

dow

n ar

row

key

to c

ance

l.

Use

the

keyp

ad to

ent

er th

eca

libra

ted

Tem

pera

ture

.Pr

ess t

he [E

nter

] key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

Pres

s the

[Ent

er] k

ey to

man

ually

turn

the

cont

rol r

elay

on o

r off

. If

no fl

ow is

det

ecte

d, a

war

ning

/ve

rific

atio

n sc

reen

will

firs

t app

ear.

Pres

s the

[Ent

er] k

ey to

man

ually

turn

the

cont

rol r

elay

on o

r off

. If

no fl

ow is

det

ecte

d, a

war

ning

/ve

rific

atio

n sc

reen

will

firs

t app

ear.

Bac

k

Bac

k

Not

e:Th

e LC

D B

ackl

ight

turn

s of

f fol

low

ing

aus

er-d

efin

ed p

erio

d of i

nact

ivity

. Pr

ess

any

key

to tu

rn th

e bac

klig

ht o

n.

The

LCD

scre

en d

ispl

ays

4 ho

rizo

ntal

row

s at a

tim

e. M

any m

enus

con

sist

of 5

or m

ore

lines

. Us

e th

e up

and

dow

nar

row

key

s to

navi

gate

thro

ugh

long

erm

enus

to d

ispl

ay a

dditio

nal m

enu

optio

nson

-scr

een.

ToTi

mer

Scr

een,

pH

. R

efer

toAK

110

Rela

y an

d Al

arm

Tim

erSc

reen

Nav

igat

ion

ToTi

mer

Scr

een,

pH

. R

efer

toAK

110

Rela

y an

d Al

arm

Tim

erSc

reen

Nav

igat

ion

AK

110

Mai

n S

tatu

s S

cree

n N

avig

atio

n, R

ev 3

21 A

ug 2

008

48

Shor

tcut

Key

s

AK

110

Mai

n S

tatu

s S

cree

n N

avig

atio

n (2

of 2

)

Acu-Trol, SN123456

Swimming Pool


AK110E7, 07/22/08

Ver

sion

Con

trol

Scr

een

pH

> 7.67-OFF 7.50s

ORP 490 -OFF 700s

_____

69.0f SW1OFFSW2OFF

Mai

n S

tatu

s, c

urso

r an

ywhe

re

>Name:Main Pool

System

Programming

Service

Data ( 8:441 )

Communications

Security Setup

Wizards

Serial # 123456

Con

figur

atio

n M

enu

Scr

een

Sys

tem

Info

rmat

ion

Scr

een

TotalON 12:34hrs

MemoryWR 1

Watchdog 0

0 0 0

"Any

"K

ey

6 Bac

k

4 Bac

k

pH

> 7.67-OFF 7.50s

ORP 490 -OFF 700s

_____

69.0f SW1OFFSW2OFF

Mai

n S

tatu

s, c

urso

r an

ywhe

reM

odem

Dia

gnos

tics

Scr

een

+++ATH OK AT&F&C1&D1

&K0S8=4 OK _

Pager 0PgD: 0

Sts 0 6789 0

pH

> 7.67-OFF 7.50s

ORP 490 -OFF 700s

_____

69.0f SW1OFFSW2OFF

Mai

n S

tatu

s, c

urso

r an

ywhe

reD

iagn

ostic

s P

assw

ord

Scr

een

Enter Password

Enter:

v-Cancel

pH

> 7.67-OFF 7.50s

ORP 490 -OFF 700s

_____

69.0f SW1OFFSW2OFF

Mai

n S

tatu

s, c

urso

r on

val

ueR

eset

Cal

ibra

tion

Scr

een

-Confirm Changes

-Reset current calib

ration?

NO:7 9:Yes

0 97 or

pH

> 7.67-OFF 7.50s

ORP 490 -OFF 700s

_____

69.0f SW1OFFSW2OFF

Mai

n S

tatu

s, c

urso

r at

top

row

9

"Any

"K

ey

pH

> 7.67-OFF 7.50s

ORP 490 -OFF 700s

_____

69.0f SW1OFFSW2OFF

Mai

n S

tatu

s, c

urso

r an

ywhe

re

Bac

k

A n

umer

of s

cree

ns m

ay b

e qu

ickly

acc

esse

d di

recl

y th

roug

h th

e M

ain

Stat

usSc

reen

. Th

e pr

imar

y pu

rpos

e of

thes

e scr

eens

is to

con

veni

ently

pro

vide

sys

tem

iden

tific

atio

n, c

onfig

urat

ion

and

diagn

ostic

info

rmat

ion

to th

e us

er o

r to

serv

ice

pers

onne

l.

The

Syst

em In

form

atio

n Sc

reen

disp

lays

uni

t inf

orm

atio

n su

ch a

sto

tal u

nit o

n-tim

e an

d in

tern

alsy

stem

cou

nter

s.

Pres

s the

[9] k

ey to

go

to th

eSy

stem

Info

rmat

ion

Scre

en.

Pres

s "an

y" k

ey to

retu

rn to

the

Mai

n St

atus

Scr

een.

Pres

s the

[6] k

ey to

go

to th

eM

odem

Dia

gnos

tics S

cree

n.Pr

ess t

he [B

ack]

key

to re

turn

to th

eM

ain

Stat

us S

cree

n.

An

optio

nal m

odem

mus

t be

inst

alle

d in

the A

K11

0 in

ord

er fo

rth

e M

odem

Dia

gnos

tics S

cree

n to

disp

lay

pert

inen

t dat

a.

Pres

s the

[4] k

ey to

go

to th

eD

iagn

ostic

s Pas

swor

d Sc

reen

.Pr

ess t

he [B

ack]

key

to re

turn

to th

eM

ain

Stat

us S

cree

n.

The

Dia

gnos

tics P

assw

ord

Scre

enis

inte

nded

for u

se b

y A

cu-T

rol

fact

ory

and

auth

oriz

ed p

rodu

ctsu

ppor

t per

sonn

el o

nly.

Pres

s the

up

arro

w ke

y to

go

to th

eVe

rsio

n C

ontr

ol S

cree

n.Pr

ess "

any"

key

to re

turn

to th

eM

ain

Stat

us S

cree

n.

The

Vers

ion

Con

trol

Scr

een

disp

lays

iden

tifyi

ng u

nit i

nfor

mat

ion

incl

udin

g th

e se

rial

num

ber a

nd th

ein

stal

led

firm

war

e re

visi

on.

Pres

s the

[9] k

ey to

rese

t the

sele

cted

cali

brat

ion

offs

et to

zero

or t

he [7

] key

to c

ance

l.

Mov

e th

e cu

rsor t

o a

sens

orm

easu

rem

ent v

alue

and

pres

s the

[0] k

ey to

go

to th

eRe

set C

alib

ratio

n Sc

reen

.

Pres

s the

[Bac

k] k

ey to

go

to th

eC

onfig

urat

ion

Men

u Sc

reen

.Pr

ess t

he [B

ack]

key

onc

e ag

ain

tore

turn

to th

e M

ain

Stat

us S

cree

n.

Flow Switch #2

SW2 K => 0.0 pul/g

Clear

Flow

Sw

itch

2 S

etup

, K-F

acto

r

Flow Switch #2

SW2 K = 8.5 pul/g

g/m = 35

Total = 256 >Clear

Flow

Sw

itch

2 S

etup

, Cle

ar C

ount

er

Enter new value

Current: 0.0

0.0

v-Cancel ^

Flow

Sw

itch

K-F

acto

r S

cree

n

Use

the

keyp

ad to

ent

er th

e K

-fac

tor

for t

he in

stall

ed fl

ow m

eter

.Pr

ess t

he [E

nter

] key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

Ent

er

Ent

er

Sw

itch

2 S

etup

, Cle

ar C

ount

erFlow Switch #2

SW2 K = 8.5 pul/g

g/m = 35

Total = 0 >Clear

Flow Switch #2

SW2 K = 3.6 pul/l

l/m = 83

Total = 372 >Clear

Flow

Sw

itch

2 Se

tup,

Met

ric U

nits

Dig

ital F

low

Met

er S

etup

If th

e A

K11

0 is

con

figur

ed to

dis

play

met

ric u

nits

of m

easu

rem

ent,

the

flow

sens

or v

alue

s w

ill b

e di

spla

yed

in li

ters

rath

er th

an g

allo

ns.

Mai

n S

tatu

s, C

urso

r at

Flo

w S

witc

h 2

pH 7.67-OFF 7.50s

ORP 490 –OFF 700s

_____

69.0f SW1OFF>W2OFF

The

unit

"g/m

" re

pres

ents

the

mea

sure

d flo

w ra

te. "

Tot

al"

is th

eac

cum

ulat

ed v

olum

e, as

cal

cula

ted

by th

e flo

w ra

te an

d th

e K

-fac

tor.

Pres

s the

[Ent

er] k

ey to

rese

t the

accu

mul

ated

vol

ume

coun

ter t

oze

ro.

The

two

flow

switc

h in

puts

are

, in

the d

efau

lt co

nfig

urat

ion,

set

up

as s

impl

e on

/of

f sw

itche

s. O

ne o

r bot

h of

thes

e flo

w s

witc

h in

puts

may

be

conf

igur

ed to

oper

ate

with

a d

igita

l flo

w m

eter

to me

asur

e th

e flo

w ra

te th

roug

h a

pipe

.

Ass

igni

ng a

K-f

acto

r of "

0.0"

to a

flow

sw

itch

allo

ws

it to

ope

rate

as

a si

mpl

e on

/of

f flo

w sw

itch.

As

Flow

Swi

tch

1 fu

nctio

ns a

s the

defa

ult f

low

sw

itch

for r

elay

cont

rol,

it is

reco

mm

ende

d th

at it r

emai

n co

nfig

ured

as

a si

mpl

e on

/off

flow

switc

h.

To se

t up

a flo

w sw

itch

inpu

t to

oper

ate w

ith a

dig

ital f

low

met

er, e

nter

in th

ese

nsor

K-f

acto

r. T

he fl

ow ra

te is

disp

laye

d on

-scr

een

as g

allo

ns p

er m

inut

e (g

/m)

or a

s lite

rs p

er m

inut

e (l/

m).

Fur

ther

mor

e, the

acc

umul

ated

vol

ume

is ta

llied

and

disp

laye

d (in

gal

lons

or i

n lit

ers) a

s th

e "T

otal

" vo

lum

e.

In th

is ex

ampl

e, F

low

Swi

tch

2 is

con

figur

ed to

ope

rate

with

a d

igita

l flo

w m

eter

.

Ent

erB

ack

Mai

n S

tatu

s, S

witc

h 2

Flow

Rat

epH

> 7.67-OFF 7.50s

ORP 490 –OFF 700s

_____

69.0f SW1ON FM 35

Onc

e Fl

ow S

witc

h 2

has

been

conf

igur

ed to

ope

rate

with

a d

igita

lflo

w se

nsor

, the

mea

sure

d flo

w ra

teis

dis

plae

d in

the

"SW

2" p

ositi

on.

pH

> 7.67-OFF 7.50s

PPM 2.65-OFF 2.00s

_____

69.0f SW1OFFSW2OFF

Mai

n S

tatu

s, c

urso

r on

the

far

left

Bac

k

AK

Col

or™

Sta

tus

Scr

een

FREE= 2.65 75/240

MixingDPD

lvl= 90%

CLRv= 3.48 v= 1.98

Pres

s the

left

arrow

key

to g

o to

the

AKC

olor

Sta

tus S

cree

n.Pr

ess t

he [B

ack]

key

to re

turn

toth

e M

ain

Stat

us S

cree

n.

An

optio

nal c

olor

imet

ric

inte

rfac

ese

nsor

car

d m

ust b

e ins

talle

d in

the

AK

110

in o

rder

for t

he A

KC

olor

™St

atus

Scr

een

to b

e ac

cess

able

.

AK

110

Mai

n S

tatu

s S

cree

n N

avig

atio

n, R

ev 3

21 A

ug 2

008

49

Shor

tcut

Key

s

AK

110

Mai

n S

tatu

s S

cree

n N

avig

atio

n (2

of 2

)

Acu-Trol, SN123456

Swimming Pool


AK110E7, 07/22/08

Ver

sion

Con

trol

Scr

een

pH

> 7.67-OFF 7.50s

ORP 490 -OFF 700s

_____

69.0f SW1OFFSW2OFF

Mai

n S

tatu

s, c

urso

r an

ywhe

re

>Name:Main Pool

System

Programming

Service

Data ( 8:441 )

Communications

Security Setup

Wizards

Serial # 123456

Con

figur

atio

n M

enu

Scr

een

Sys

tem

Info

rmat

ion

Scr

een

TotalON 12:34hrs

MemoryWR 1

Watchdog 0

0 0 0

"Any

"K

ey

6 Bac

k

4 Bac

k

pH

> 7.67-OFF 7.50s

ORP 490 -OFF 700s

_____

69.0f SW1OFFSW2OFF

Mai

n S

tatu

s, c

urso

r an

ywhe

reM

odem

Dia

gnos

tics

Scr

een


&K0S8=4 OK _

Pager 0PgD: 0

Sts 0 6789 0

pH

> 7.67-OFF 7.50s

ORP 490 -OFF 700s

_____

69.0f SW1OFFSW2OFF

Mai

n S

tatu

s, c

urso

r an

ywhe

reD

iagn

ostic

s P

assw

ord

Scr

een

Enter Password

Enter:

v-Cancel

pH

> 7.67-OFF 7.50s

ORP 490 -OFF 700s

_____

69.0f SW1OFFSW2OFF

Mai

n S

tatu

s, c

urso

r on

val

ueR

eset

Cal

ibra

tion

Scr

een

-Confirm Changes

-Reset current calib

ration?

NO:7 9:Yes

0 97 or

pH

> 7.67-OFF 7.50s

ORP 490 -OFF 700s

_____

69.0f SW1OFFSW2OFF

Mai

n S

tatu

s, c

urso

r at

top

row

9

"Any

"K

ey

pH

> 7.67-OFF 7.50s

ORP 490 -OFF 700s

_____

69.0f SW1OFFSW2OFF

Mai

n S

tatu

s, c

urso

r an

ywhe

re

Bac

k

A n

umer

of s

cree

ns m

ay b

e qu

ickly

acc

esse

d di

recl

y th

roug

h th

e M

ain

Stat

usSc

reen

. Th

e pr

imar

y pu

rpos

e of

thes

e scr

eens

is to

con

veni

ently

pro

vide

sys

tem

iden

tific

atio

n, c

onfig

urat

ion

and

diagn

ostic

info

rmat

ion

to th

e us

er o

r to

serv

ice

pers

onne

l.

The

Syst

em In

form

atio

n Sc

reen

disp

lays

uni

t inf

orm

atio

n su

ch a

sto

tal u

nit o

n-tim

e an

d in

tern

alsy

stem

cou

nter

s.

Pres

s the

[9] k

ey to

go

to th

eSy

stem

Info

rmat

ion

Scre

en.

Pres

s "an

y" k

ey to

retu

rn to

the

Mai

n St

atus

Scr

een.

Pres

s the

[6] k

ey to

go

to th

eM

odem

Dia

gnos

tics S

cree

n.Pr

ess t

he [B

ack]

key

to re

turn

to th

eM

ain

Stat

us S

cree

n.

An

optio

nal m

odem

mus

t be

inst

alle

d in

the A

K11

0 in

ord

er fo

rth

e M

odem

Dia

gnos

tics S

cree

n to

disp

lay

pert

inen

t dat

a.

Pres

s the

[4] k

ey to

go

to th

eD

iagn

ostic

s Pas

swor

d Sc

reen

.Pr

ess t

he [B

ack]

key

to re

turn

to th

eM

ain

Stat

us S

cree

n.

The

Dia

gnos

tics P

assw

ord

Scre

enis

inte

nded

for u

se b

y A

cu-T

rol

fact

ory

and

auth

oriz

ed p

rodu

ctsu

ppor

t per

sonn

el o

nly.

Pres

s the

up

arro

w ke

y to

go

to th

eVe

rsio

n C

ontr

ol S

cree

n .Pr

ess "

any"

key

to re

turn

to th

eM

ain

Stat

us S

cree

n .

The

Vers

ion

Con

trol

Scr

een

disp

lays

iden

tifyi

ng u

nit i

nfor

mat

ion

incl

udin

g th

e se

rial

num

ber a

nd th

ein

stal

led

firm

war

e re

visi

on.

Pres

s the

[9] k

ey to

rese

t the

sele

cted

cali

brat

ion

offs

et to

zero

or t

he [7

] key

to c

ance

l.

Mov

e th

e cu

rsor t

o a

sens

orm

easu

rem

ent v

alue

and

pres

s the

[0] k

ey to

go

to th

eRe

set C

alib

ratio

n Sc

reen

.

Pres

s the

[Bac

k] k

ey to

go

to th

eC

onfig

urat

ion

Men

u Sc

reen

.Pr

ess t

he [B

ack]

key

onc

e ag

ain

tore

turn

to th

e M

ain

Stat

us S

cree

n.

Flow Switch #2

SW2 K => 0.0 pul/g

Clear

Flow

Sw

itch

2 S

etup

, K-F

acto

r

Flow Switch #2

SW2 K = 8.5 pul/g

g/m = 35

Total = 256 >Clear

Flow

Sw

itch

2 S

etup

, Cle

ar C

ount

er

Enter new value

Current: 0.0

0.0

v-Cancel ^

Flow

Sw

itch

K-F

acto

r S

cree

n

Use

the

keyp

ad to

ent

er th

e K

-fac

tor

for t

he in

stall

ed fl

ow m

eter

.Pr

ess t

he [E

nter

] key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

Ent

er

Ent

er

Sw

itch

2 S

etup

, Cle

ar C

ount

erFlow Switch #2

SW2 K = 8.5 pul/g

g/m = 35

Total = 0 >Clear

Flow Switch #2

SW2 K = 3.6 pul/l

l/m = 83

Total = 372 >Clear

Flow

Sw

itch

2 Se

tup,

Met

ric U

nits

Dig

ital F

low

Met

er S

etup

If th

e A

K11

0 is

con

figur

ed to

dis

play

met

ric u

nits

of m

easu

rem

ent,

the

flow

sens

or v

alue

s w

ill b

e di

spla

yed

in li

ters

rath

er th

an g

allo

ns.

Mai

n S

tatu

s, C

urso

r at

Flo

w S

witc

h 2

pH 7.67-OFF 7.50s

ORP 490 –OFF 700s

_____

69.0f SW1OFF>W2OFF

The

unit

"g/m

" re

pres

ents

the

mea

sure

d flo

w ra

te. "

Tot

al"

is th

eac

cum

ulat

ed v

olum

e, as

cal

cula

ted

by th

e flo

w ra

te an

d th

e K

-fac

tor.

Pres

s the

[Ent

er] k

ey to

rese

t the

accu

mul

ated

vol

ume

coun

ter t

oze

ro.

The

two

flow

switc

h in

puts

are

, in

the d

efau

lt co

nfig

urat

ion,

set

up

as s

impl

e on

/of

f sw

itche

s. O

ne o

r bot

h of

thes

e flo

w s

witc

h in

puts

may

be

conf

igur

ed to

oper

ate

with

a d

igita

l flo

w m

eter

to me

asur

e th

e flo

w ra

te th

roug

h a

pipe

.

Ass

igni

ng a

K-f

acto

r of "

0.0"

to a

flow

sw

itch

allo

ws

it to

ope

rate

as

a si

mpl

e on

/of

f flo

w sw

itch.

As

Flow

Swi

tch

1 fu

nctio

ns a

s the

defa

ult f

low

sw

itch

for r

elay

cont

rol,

it is

reco

mm

ende

d th

at it r

emai

n co

nfig

ured

as

a si

mpl

e on

/off

flow

switc

h.

To se

t up

a flo

w sw

itch

inpu

t to

oper

ate w

ith a

dig

ital f

low

met

er, e

nter

in th

ese

nsor

K-f

acto

r. T

he fl

ow ra

te is

disp

laye

d on

-scr

een

as g

allo

ns p

er m

inut

e (g

/m)

or a

s lite

rs p

er m

inut

e (l/

m).

Fur

ther

mor

e, the

acc

umul

ated

vol

ume

is ta

llied

and

disp

laye

d (in

gal

lons

or i

n lit

ers) a

s th

e "T

otal

" vo

lum

e.

In th

is ex

ampl

e, F

low

Swi

tch

2 is

con

figur

ed to

ope

rate

with

a d

igita

l flo

w m

eter

.

Ent

erB

ack

Mai

n S

tatu

s, S

witc

h 2

Flow

Rat

epH

> 7.67-OFF 7.50s

ORP 490 –OFF 700s

_____

69.0f SW1ON FM 35

Onc

e Fl

ow S

witc

h 2

has

been

conf

igur

ed to

ope

rate

with

a d

igita

lflo

w se

nsor

, the

mea

sure

d flo

w ra

teis

dis

plae

d in

the

"SW

2" p

ositi

on.

pH

> 7.67-OFF 7.50s

PPM 2.65-OFF 2.00s

_____

69.0f SW1OFFSW2OFF

Mai

n S

tatu

s, c

urso

r on

the

far

left

Bac

k

AK

Col

or™

Sta

tus

Scr

een

FREE= 2.65 75/240

MixingDPD

lvl= 90%

CLRv= 3.48 v= 1.98

Pres

s the

left

arrow

key

to g

o to

the

AKC

olor

Sta

tus S

cree

n.Pr

ess t

he [B

ack]

key

to re

turn

toth

e M

ain

Stat

us S

cree

n .

An

optio

nal c

olor

imet

ric

inte

rfac

ese

nsor

car

d m

ust b

e ins

talle

d in

the

AK

110

in o

rder

for t

he A

KC

olor

™St

atus

Scr

een

to b

e ac

cess

able

.

AK

110

Mai

n S

tatu

s S

cree

n N

avig

atio

n, R

ev 3

21 A

ug 2

008

50

pH, Mix TMR00:00:00

>TD00:00:00

CNT: 0 S 00:00:00

STS:OFF TOT 0:00

Tim

er S

cree

n, R

elay

1 (

pH)

Pager4 TMR00:00:00

>TD00:00:00

CNT: 0 S 00:00:00

STS:OFF TOT 0:00

Tim

er S

cree

n, P

ager

/ E

-mai

l 4

Pager3 TMR00:00:00

>TD00:00:00

CNT: 0 S 00:00:00

STS:OFF TOT 0:00

Tim

er S

cree

n, P

ager

/ E

-mai

l 3

Tim

er S

cree

n, P

ager

/ E

-mai

l 2Pager2 TMR00:00:00

>TD00:00:00

CNT: 0 S 00:00:00

STS:OFF TOT 0:00

Tim

er S

cree

n, P

ager

/ E

-mai


>TD00:00:00

CNT: 0 S 00:00:00

STS:OFF TOT 0:00

Alarm TMR00:00:00

>TD00:00:00

CNT: 0 S 00:00:00

STS:OFF TOT 0:00

Tim

er S

cree

n, A

larm

Relay3 TMR00:00:00

>TD00:00:00

CNT: 0 S 00:00:00

STS:OFF TOT 0:00

Tim

er S

cree

n, R

elay

3 (

Opt

iona

l)

AK

110

Rel

ay a

nd A

larm

Tim

er S

cree

n N

avig

atio

n

pH

> 7.67-OFF 7.50s

ORP 490 -OFF 700s

_____

69.0f SW1OFFSW2OFF

Mai

n S

tatu

s, cu

rsor

at p

H v

alue

Mai

n S

tatu

s, p

H R

elay

Sta

tus

pH 7.67>OFF 7.50s

ORP 490 -OFF 700s

_____

69.0f SW1OFFSW2OFF

Mai

n S

tatu

s, O

RP

Rel

ay S

tatu

spH 7.67-OFF 7.50s

ORP 490 >OFF 700s

_____

69.0f SW1OFFSW2OFF

Bac

k

pH, Mix TMR00:00:00

>TD00:00:00

CNT: 0 S 00:00:00

STS:OFF TOT 0:00

Tim

er S

cree

n, p

H R

elay

ORP, Mix TMR00:00:00

>TD00:00:00

CNT: 0 S 00:00:00

STS:OFF TOT 0:00

Tim

er S

cree

n, R

elay

2 (

OR

P)

8 7 6 5 4 3 2 1

pH, Mix TMR00:09:01

>TD00:23:45

CNT: 1234 S 02:34:56

STS:OFF TOT 12:34

Tim

er S

cree

n, T

oday

(T

D)

pH, Mix TMR00:09:01

TD00:23:45

CNT:>1234 S 02:34:56

STS:OFF TOT 12:34

Tim

er S

cree

n, C

ount

(C

NT

)

pH, Mix TMR00:09:01

TD00:23:45

CNT: 1234>S 02:34:56

STS:OFF TOT 12:34

Tim

er S

cree

n, S

et O

verf

eed

(S)

pH, Mix TMR00:09:01

TD00:23:45

CNT: 1234 S 02:34:56

STS:OFF>TOT 12:34

Tim

er S

cree

n, T

otal

Tim

e (T

OT

)

Ent

er

Ent

er

Ent

er

Ent

er

pH, Mix TMR00:09:01

>TD00:00:00

CNT: 1234 S 02:34:56

STS:OFF TOT 12:34

Res

et T

imer

, Tod

ay (

TD

)

pH, Mix TMR00:09:01

TD00:23:45

CNT:> 0 S 02:34:56

STS:OFF TOT 12:34

Res

et T

imer

, Cou

nt (

CN

T)

pH, Mix TMR00:09:01

TD00:23:45

CNT: 1234>S 00:00:00

STS:OFF TOT 12:34

Res

et T

imer

, Set

Ove

rfee

d (S

)

Res

et T

imer

, Tot

al T

ime

(TO

T)

pH, Mix TMR00:09:01

TD00:23:45

CNT: 1234 S 02:34:56

STS:OFF>TOT 0:00

Cyc

ling

Thro

ugh

the

Tim

er S

cree

ns

Ther

e ar

e a

tota

l of e

ight

Tim

erSc

reen

s. O

ne T

imer

Scr

een

isav

aila

ble

for e

ach

of th

e th

ree

rela

ys, o

ne fo

r the

fron

t pan

elal

arm

, and

one

for e

ach

of th

e fo

urpa

ger/e

-mail

dev

ices

.

If re

lay

3 ha

s not

been

con

figur

ed,

the

Tim

er S

cree

n fo

r tha

t rel

ayw

ill a

ppea

r bla

nk.

From

any

Tim

er S

cree

n, p

ress

the

[Bac

k] k

ey to

retu

rn to

the

Mai

nSt

atus

Scr

een.

The

eigh

t Tim

er S

cree

ns a

rear

rang

ed in

a sp

ecifi

c se

quen

ce.

Pres

s the

up

or do

wn

arro

w k

eys

to c

ycle

from

one

Tim

er S

cree

nto

ano

ther

.

Each

of t

he T

imer

Scr

eens

corr

espo

nds t

o a n

umbe

r, fr

om[1

] to

[8].

To

jum

p di

rect

ly to

asp

ecifi

c Ti

mer

Scr

een,

pre

ss th

eke

ypad

num

ber a

ssoci

ated

with

that

dev

ice.

For

inst

ance

, to

jum

pto

the

Alar

m T

imer

Scr

een,

pre

ssth

e [4

] key

.

Nav

igat

ing

With

in th

e Ti

mer

Scr

een

Each

of t

he fo

ur se

lecta

ble

timer

s ca

n be

man

ually

rese

t to

zero

. To

rese

t a s

peci

fictim

er, p

ress

the

right

arro

w k

ey to

pos

ition

the

curs

or n

ext t

o th

e tim

er, t

hen

pres

s th

e[E

nter

] key

.

From

any

Tim

er S

cree

n, p

ress

the

[Bac

k] k

eyto

retu

rn to

the

Mai

n St

atus

Scr

een.

Acc

essi

ng th

e Ti

mer

Scr

eens

Tim

er S

cree

ns c

an b

e ac

cess

ed fr

om th

eM

ain

Stat

us S

cree

n. P

ress

the r

ight

arr

owke

y to

mov

e th

e cu

rsor

to th

e st

atus

indi

cato

rof

rela

y 1,

2, o

r 3 (i

f con

figur

ed.)

Pre

ss th

erig

ht a

rrow

key

aga

in to

acc

ess

the

pH T

imer

Scre

en.

From

ther

e, p

ress

the

up o

r dow

nar

row

key

s to

navi

gate

to ad

ditio

nal t

imer

scre

ens (

see

"Cyc

ling T

hrou

gh th

e T

imer

Scre

ens"

at r

ight

).

Use

the

right

arr

ow k

ey to

nav

igat

e w

ithin

the

Tim

er S

cree

n. T

here

four

time

r cur

sor

posi

tions

to cy

cle

thro

ugh:

Acc

umul

ated

on-

time

for t

he d

ay.

Num

ber o

f rel

ay c

ycles

sin

ce la

st re

set.

Rel

ay o

n-tim

e w

ithou

t rea

chin

g se

tpoi

nt.

Tota

l on-

time

sinc

e the

last

rese

t.

TD:

CN

T: S:TO

T:

Bac

k

AK

110

Rel

ay a

nd A

larm

Tim

er S

cree

n N

avig

atio

n, R

ev 3

21 A

ug 2

00810.2

51

pH, Mix TMR00:00:00

>TD00:00:00

CNT: 0 S 00:00:00

STS:OFF TOT 0:00

Tim

er S

cree

n, R

elay

1 (

pH)

Pager4 TMR00:00:00

>TD00:00:00

CNT: 0 S 00:00:00

STS:OFF TOT 0:00

Tim

er S

cree

n, P

ager

/ E

-mai

l 4

Pager3 TMR00:00:00

>TD00:00:00

CNT: 0 S 00:00:00

STS:OFF TOT 0:00

Tim

er S

cree

n, P

ager

/ E

-mai

l 3

Tim

er S

cree

n, P

ager

/ E

-mai


>TD00:00:00

CNT: 0 S 00:00:00

STS:OFF TOT 0:00

Tim

er S

cree

n, P

ager

/ E

-mai


>TD00:00:00

CNT: 0 S 00:00:00

STS:OFF TOT 0:00

Alarm TMR00:00:00

>TD00:00:00

CNT: 0 S 00:00:00

STS:OFF TOT 0:00

Tim

er S

cree

n, A

larm

Relay3 TMR00:00:00

>TD00:00:00

CNT: 0 S 00:00:00

STS:OFF TOT 0:00

Tim

er S

cree

n, R

elay

3 (

Opt

iona

l)

AK

110

Rel

ay a

nd A

larm

Tim

er S

cree

n N

avig

atio

n

pH

> 7.67-OFF 7.50s

ORP 490 -OFF 700s

_____

69.0f SW1OFFSW2OFF

Mai

n S

tatu

s, cu

rsor

at p

H v

alue

Mai

n S

tatu

s, p

H R

elay

Sta

tus

pH 7.67>OFF 7.50s

ORP 490 -OFF 700s

_____

69.0f SW1OFFSW2OFF

Mai

n S

tatu

s, O

RP

Rel

ay S

tatu

spH 7.67-OFF 7.50s

ORP 490 >OFF 700s

_____

69.0f SW1OFFSW2OFF

Bac

k

pH, Mix TMR00:00:00

>TD00:00:00

CNT: 0 S 00:00:00

STS:OFF TOT 0:00

Tim

er S

cree

n, p

H R

elay

ORP, Mix TMR00:00:00

>TD00:00:00

CNT: 0 S 00:00:00

STS:OFF TOT 0:00

Tim

er S

cree

n, R

elay

2 (

OR

P)

8 7 6 5 4 3 2 1

pH, Mix TMR00:09:01

>TD00:23:45

CNT: 1234 S 02:34:56

STS:OFF TOT 12:34

Tim

er S

cree

n, T

oday

(T

D)

pH, Mix TMR00:09:01

TD00:23:45

CNT:>1234 S 02:34:56

STS:OFF TOT 12:34

Tim

er S

cree

n, C

ount

(C

NT

)

pH, Mix TMR00:09:01

TD00:23:45

CNT: 1234>S 02:34:56

STS:OFF TOT 12:34

Tim

er S

cree

n, S

et O

verf

eed

(S)

pH, Mix TMR00:09:01

TD00:23:45

CNT: 1234 S 02:34:56

STS:OFF>TOT 12:34

Tim

er S

cree

n, T

otal

Tim

e (T

OT

)

Ent

er

Ent

er

Ent

er

Ent

er

pH, Mix TMR00:09:01

>TD00:00:00

CNT: 1234 S 02:34:56

STS:OFF TOT 12:34

Res

et T

imer

, Tod

ay (

TD

)

pH, Mix TMR00:09:01

TD00:23:45

CNT:> 0 S 02:34:56

STS:OFF TOT 12:34

Res

et T

imer

, Cou

nt (

CN

T)

pH, Mix TMR00:09:01

TD00:23:45

CNT: 1234>S 00:00:00

STS:OFF TOT 12:34

Res

et T

imer

, Set

Ove

rfee

d (S

)

Res

et T

imer

, Tot

al T

ime

(TO

T)

pH, Mix TMR00:09:01

TD00:23:45

CNT: 1234 S 02:34:56

STS:OFF>TOT 0:00

Cyc

ling

Thro

ugh

the

Tim

er S

cree

ns

Ther

e ar

e a

tota

l of e

ight

Tim

erSc

reen

s. O

ne T

imer

Scr

een

isav

aila

ble

for e

ach

of th

e th

ree

rela

ys, o

ne fo

r the

fron

t pan

elal

arm

, and

one

for e

ach

of th

e fo

urpa

ger/e

-mail

dev

ices

.

If re

lay

3 ha

s not

been

con

figur

ed,

the

Tim

er S

cree

n fo

r tha

t rel

ayw

ill a

ppea

r bla

nk.

From

any

Tim

er S

cree

n, p

ress

the

[Bac

k] k

ey to

retu

rn to

the

Mai

nSt

atus

Scr

een.

The

eigh

t Tim

er S

cree

ns a

rear

rang

ed in

a sp

ecifi

c se

quen

ce.

Pres

s the

up

or do

wn

arro

w k

eys

to c

ycle

from

one

Tim

er S

cree

nto

ano

ther

.

Each

of t

he T

imer

Scr

eens

corr

espo

nds t

o a n

umbe

r, fr

om[1

] to

[8].

To

jum

p di

rect

ly to

asp

ecifi

c Ti

mer

Scr

een,

pre

ss th

eke

ypad

num

ber a

ssoci

ated

with

that

dev

ice.

For

inst

ance

, to

jum

pto

the

Alar

m T

imer

Scr

een,

pre

ssth

e [4

] key

.

Nav

igat

ing

With

in th

e Ti

mer

Scr

een

Each

of t

he fo

ur se

lecta

ble

timer

s ca

n be

man

ually

rese

t to

zero

. To

rese

t a s

peci

fictim

er, p

ress

the

right

arro

w k

ey to

pos

ition

the

curs

or n

ext t

o th

e tim

er, t

hen

pres

s th

e[E

nter

] key

.

From

any

Tim

er S

cree

n, p

ress

the

[Bac

k] k

eyto

retu

rn to

the

Mai

n St

atus

Scr

een.

Acc

essi

ng th

e Ti

mer

Scr

eens

Tim

er S

cree

ns c

an b

e ac

cess

ed fr

om th

eM

ain

Stat

us S

cree

n. P

ress

the r

ight

arr

owke

y to

mov

e th

e cu

rsor

to th

e st

atus

indi

cato

rof

rela

y 1,

2, o

r 3 (i

f con

figur

ed.)

Pre

ss th

erig

ht a

rrow

key

aga

in to

acc

ess

the

pH T

imer

Scre

en.

From

ther

e, p

ress

the

up o

r dow

nar

row

key

s to

navi

gate

to ad

ditio

nal t

imer

scre

ens (

see

"Cyc

ling T

hrou

gh th

e T

imer

Scre

ens"

at r

ight

).

Use

the

right

arr

ow k

ey to

nav

igat

e w

ithin

the

Tim

er S

cree

n. T

here

four

time

r cur

sor

posi

tions

to cy

cle

thro

ugh:

Acc

umul

ated

on-

time

for t

he d

ay.

Num

ber o

f rel

ay c

ycles

sin

ce la

st re

set.

Rel

ay o

n-tim

e w

ithou

t rea

chin

g se

tpoi

nt.

Tota

l on-

time

sinc

e the

last

rese

t.

TD:

CN

T: S:TO

T:

Bac

k

AK

110

Rel

ay a

nd A

larm

Tim

er S

cree

n N

avig

atio

n, R

ev 3

21 A

ug 2

008

52

pH

> 7.67-OFF 7.50s

ORP 490 -OFF 700s

_____

69.0f SW1OFFSW2OFF

Mai

n S

tatu

s S

cree

n

>Name:Main Pool

System

Programming

Service

Data ( 8:441 )

Communications

Security Setup

Wizards

Serial # 123456

Con

figur

atio

n M

enu,

Con

trol

ler

Nam

e Ent

er

1 Main Pool

U

v-Cancel Back-Ins

Con

trolle

r Nam

e S

etup

Scr

een

>Time: 12:34:56

Date: 07/04/08

Day : Friday

Units: ENGLISH

Data Interval: 2

Sanitizer: Cl

On Delay 15

Backlight T 60

Temp Display: ON

Reset to Defaults

Normal Alarms

Name:Main Pool

>System

Programming

Service

Data ( 8:441 )

Communications

Security Setup

Wizards

Serial # 123456

Con

figur

ation

Men

u, S

yste

mS

yste

m S

etup

Scr

een

Name:Main Pool

System

>Programming

Service

Data ( 8:441 )

Communications

Security Setup

Wizards

Serial # 123456

Con

figur

atio

n M

enu,

Pro

gram

min

g

Name:Main Pool

System

Programming

>Service

Data ( 8:441 )

Communications

Security Setup

Wizards

Serial # 123456

Con

figur

atio

n M

enu,

Ser

vice

Name:Main Pool

System

Programming

Service

>Data ( 8:441 )

Communications

Security Setup

Wizards

Serial # 123456

Con

figur

atio

n M

enu,

Dat

a

Name:Main Pool

System

Programming

Service

Data ( 8:441 )

Communications

>Security Setup

Wizards

Serial # 123456

Con

figur

ation

Men

u, S

ecur

ity

Name:Main Pool

System

Programming

Service

Data ( 8:441 )

Communications

Security Setup

>Wizards

Serial # 123456

Con

figur

atio

n Me

nu, W

izar

ds

Ent

er

Bac

k

>1:pH, Mix Time

2:ORP, Mix Time

3:Not Used

A:Alarm

P:Pager1

P:Pager2

P:Pager3

P:Pager4

Pro

gram

ming

Set

up S

cree

n

Ent

er

Bac

k

Ent

er

Bac

k

Ent

er

Bac

k

Ent

er

Bac

k

Ent

er

Bac

k

>All Off 10 min(NO)

Clear Calibrations

Clear Data

Clear RLY Timers

Ser

vice

Scr

een

07/04 pH ORP Temp

12:00 7.68 745 76.

10:00 7.53 744 76.

08:00 7.45 740 75.

06:00 7.42 740 75.

04:00 7.45 742 76.

02:00 7.59 746 77.

00:00 7.60 750 76.

22:00 7.64 752 75.

Dat

a D

ispl

ay S

cree

n

-Password Setup-

>Master: 0

Service:0

Clear All Passwords

Sec

urity

Set

up S

cree

n

>1:pH, Mix Time

2:ORP, Mix Time

3:Not Used

A:Alarm

P:Pager1

P:Pager2

P:Pager3

P:Pager4

Wiz

ard

Set

up S

cree

n

AK

110

Con

figur

atio

n M

enu

Scr

een

Nav

igat

ion

Bac

k

Name:Main Pool

System

Programming

Service

Data ( 8:441 )

Communications

Security Setup

Wizards

>Serial # 123456

Con

figur

atio

n M

enu,

Ser

ial N

umbe

r

The

men

u ite

ms t

hat a

ppea

r on

the

Prog

ram

min

g Se

tup

Scre

en w

ill v

ary

in a

ccor

danc

e w

ith th

e us

er-s

peci

fied

conf

igur

atio

n as

wel

l as

with

the

inst

alle

d m

odem

and

sens

or c

ards

.

Name:Main Pool

System

Programming

Service

Data ( 8:441 )

>Communications

Security Setup

Wizards

Serial # 123456

Con

figur

atio

n M

enu,

Com

mun

icat

ions E

nter

Bac

k

>Modem (Dial-Up)

Pager Test

Pager Numbers

Advanced Setup

Diagnostics

Sync Byte1: 203

Sync Byte2: 204

Com

mun

icatio

ns S

cree

n

AK

110

Con

figur

atio

n M

enu

Nav

igat

ion,

Rev

321

Aug

200

8

10.3

53

pH

> 7.67-OFF 7.50s

ORP 490 -OFF 700s

_____

69.0f SW1OFFSW2OFF

Mai

n S

tatu

s S

cree

n

>Name:Main Pool

System

Programming

Service

Data ( 8:441 )

Communications

Security Setup

Wizards

Serial # 123456

Con

figur

atio

n M

enu,

Con

trol

ler

Nam

e Ent

er

1 Main Pool

U

v-Cancel Back-Ins

Con

trolle

r Nam

e S

etup

Scr

een

>Time: 12:34:56

Date: 07/04/08

Day : Friday

Units: ENGLISH

Data Interval: 2

Sanitizer: Cl

On Delay 15

Backlight T 60

Temp Display: ON

Reset to Defaults

Normal Alarms

Name:Main Pool

>System

Programming

Service

Data ( 8:441 )

Communications

Security Setup

Wizards

Serial # 123456

Con

figur

ation

Men

u, S

yste

mS

yste

m S

etup

Scr

een

Name:Main Pool

System

>Programming

Service

Data ( 8:441 )

Communications

Security Setup

Wizards

Serial # 123456

Con

figur

atio

n M

enu,

Pro

gram

min

g

Name:Main Pool

System

Programming

>Service

Data ( 8:441 )

Communications

Security Setup

Wizards

Serial # 123456

Con

figur

atio

n M

enu,

Ser

vice

Name:Main Pool

System

Programming

Service

>Data ( 8:441 )

Communications

Security Setup

Wizards

Serial # 123456

Con

figur

atio

n M

enu,

Dat

a

Name:Main Pool

System

Programming

Service

Data ( 8:441 )

Communications

>Security Setup

Wizards

Serial # 123456

Con

figur

ation

Men

u, S

ecur

ity

Name:Main Pool

System

Programming

Service

Data ( 8:441 )

Communications

Security Setup

>Wizards

Serial # 123456

Con

figur

atio

n Me

nu, W

izar

ds

Ent

er

Bac

k

>1:pH, Mix Time

2:ORP, Mix Time

3:Not Used

A:Alarm

P:Pager1

P:Pager2

P:Pager3

P:Pager4

Pro

gram

ming

Set

up S

cree

n

Ent

er

Bac

k

Ent

er

Bac

k

Ent

er

Bac

k

Ent

er

Bac

k

Ent

er

Bac

k

>All Off 10 min(NO)

Clear Calibrations

Clear Data

Clear RLY Timers

Ser

vice

Scr

een

07/04 pH ORP Temp

12:00 7.68 745 76.

10:00 7.53 744 76.

08:00 7.45 740 75.

06:00 7.42 740 75.

04:00 7.45 742 76.

02:00 7.59 746 77.

00:00 7.60 750 76.

22:00 7.64 752 75.

Dat

a D

ispl

ay S

cree

n

-Password Setup-

>Master: 0

Service:0

Clear All Passwords

Sec

urity

Set

up S

cree

n

>1:pH, Mix Time

2:ORP, Mix Time

3:Not Used

A:Alarm

P:Pager1

P:Pager2

P:Pager3

P:Pager4

Wiz

ard

Set

up S

cree

n

AK

110

Con

figur

atio

n M

enu

Scr

een

Nav

igat

ion

Bac

k

Name:Main Pool

System

Programming

Service

Data ( 8:441 )

Communications

Security Setup

Wizards

>Serial # 123456

Con

figur

atio

n M

enu,

Ser

ial N

umbe

r

The

men

u ite

ms t

hat a

ppea

r on

the

Prog

ram

min

g Se

tup

Scre

en w

ill v

ary

in a

ccor

danc

e w

ith th

e us

er-s

peci

fied

conf

igur

atio

n as

wel

l as

with

the

inst

alle

d m

odem

and

sens

or c

ards

.

Name:Main Pool

System

Programming

Service

Data ( 8:441 )

>Communications

Security Setup

Wizards

Serial # 123456

Con

figur

atio

n M

enu,

Com

mun

icat

ions E

nter

Bac

k

>Modem (Dial-Up)

Pager Test

Pager Numbers

Advanced Setup

Diagnostics

Sync Byte1: 203

Sync Byte2: 204

Com

mun

icatio

ns S

cree

n

AK

110

Con

figur

atio

n M

enu

Nav

igat

ion,

Rev

321

Aug

200

8

54

pH

> 7.67-OFF 7.50s

ORP 490 -OFF 700s

_____

69.0f SW1OFFSW2OFF

Mai

n St

atus

Scr

een

>Name:Main Pool

System

Programming

Service

Data ( 8:441 )

Communications

Security Setup

Wizards

Serial # 123456

Con

figur

ation

Men

u, C

ontr

olle

r N

ame

AK

110

Con

trolle

r Nam

e S

cree

n N

avig

atio

n

Bac

k

Con

trolle

r N

ame

Set

up S

cree

n

Use

the

AK

110

keyp

ad to

ent

er in

ane

w c

ontro

ller n

ame.

The

con

trol

ler

nam

e m

ay c

onsi

st o

f a m

axim

um o

f14

alp

hanu

mer

ic c

hara

cter

s.Pr

ess t

he d

own

arrow

key

to re

turn

to th

e co

nfig

urat

ion

men

u.

Usi

ng th

e A

K11

0 K

eypa

d to

Nam

e th

e C

ontr

olle

r

1 Main Pool

U

v-Cancel Back-Ins

Ent

er

1 Main Pool

U

v-Cancel Back-Ins

1Main Pool

U

v-Cancel Back-Ins

Each

num

eric

key

is a

ssoc

iate

d w

ith th

ree

or m

ore

lette

rs o

f the

alp

habe

t, or

with

punc

tuat

ion

and

othe

r spe

cial

cha

ract

ers.

Succ

essi

ve k

eypre

sses

cyc

le th

roug

h th

eva

rious

cha

ract

ers a

ssoc

iate

d w

ith e

ach

key.

For

inst

ance

, pre

ss th

e [5

] key

onc

eto

dis

play

the n

umbe

r "5"

on-

scre

en.

Pres

s it a

seco

nd tim

e (w

hile

the

curs

or is

in th

e sa

me

posi

tion)

to d

ispl

ay th

e le

tter

"J".

The

third

key

pres

s di

spla

ys th

e le

tter

"K"

and

the

four

th ke

ypre

ss d

ispl

ays

the

lette

r "L"

. Pr

ess t

he k

ey o

ne m

ore

time

tore

turn

to th

e nu

mbe

r "5"

.

Each

of t

he a

rrow

keys

as

wel

l as

the

[Bac

k] a

nd [E

nter

] key

s pe

rfor

m s

peci

ficfu

nctio

ns w

ithin

the

Con

trol

ler

Nam

eSc

reen

.

Pres

s the

up

arro

w ke

y to

del

ete

the

char

acte

r at t

he c

urso

r pos

ition

.Pr

ess t

he le

ft ar

row k

ey to

mov

e th

ecu

rsor

one

spac

e to

the

left.

Pres

s the

righ

t arro

w k

ey to

mov

e th

ecu

rsor

one

spac

e to

the

righ

t.Pr

ess t

he d

own

arro

w ke

y to

can

cel o

ut o

fth

e co

ntro

ller n

amin

g pr

oces

s.Pr

ess t

he [B

ack]

key

to in

sert

a b

lank

spac

e at

the c

urso

r pos

ition

.Pr

ess t

he [E

nter]

key

to c

onfir

m th

eco

ntro

ller n

ame

as d

ispl

ayed

on-

scre

en.

Mov

ing

the

Cur

sor

Con

trolle

r Nam

e, U

pper

Cas

e T

ext

Con

trolle

r N

ame,

Low

er C

ase

Tex

t

Con

trolle

r Nam

e, C

urso

r to

Rig

ht

1 main Pool

u

v-Cancel Back-Ins

To c

hang

e be

twee

n up

per c

ase

and

low

er c

ase le

tters

, pre

ss th

e le

ft ar

row

key

unt

il th

ecu

rsor

is in

the

leftm

ost p

ositi

on, t

hen p

ress

the

left

arro

w k

ey o

nce

agai

n. T

he le

tter

"U"

in th

e lo

wer

righ

t cor

ner o

f the

disp

lay

indi

cate

s w

heth

er s

ubse

quen

t tex

t ent

ered

will

be

low

er c

ase o

r upp

er c

ase.

1 Main Pool

U

v-Cancel Back-Ins

Con

trolle

r Nam

e, C

urso

r to

Lef

t

An

uppe

r cas

e "U

" in

the

low

er ri

ght

corn

er o

f the

disp

lay

indi

cate

s th

atle

tters

ent

ered

in vi

a th

e ke

ypad

will

be d

ispl

ayed

in u

pper

cas

e.

A lo

wer

cas

e "u

" in

the

low

er ri

ght

corn

er o

f the

disp

lay

indi

cate

s th

atle

tters

ent

ered

in vi

a th

e ke

ypad

will

be d

ispl

ayed

in lo

wer

cas

e.

The

curs

or p

ositi

on is

indi

cate

d by

the

char

acte

r "1"

loca

ted

dire

ctly

abov

e th

e fir

st ch

arac

ter i

n th

eco

ntro

ller n

ame.

Pres

s the

righ

t arr

ow k

ey to

mov

eth

e cu

rsor

one

spa

ce to

the

righ

t.

The

curs

or h

as m

oved

one

spa

ce to

the

right

and

is n

ow p

ositi

oned

dire

ctly

abo

ve th

e se

cond

cha

ract

erin

the

cont

rolle

r nam

e.Pr

ess t

he le

ft ar

row

key

to re

turn

the

curs

or to

its p

revi

ous

posi

tion.

Cha

ngin

g be

twee

n U

pper

and

Low

er C

ase

Lette

rs

T U

V89

W X

Y Z

P Q

R S7 G

H I4

J K

L5M

N O6

A B

C2D

E F3

!$%&̂

*+1

,-#.@

_0C

onfir

m

ENTE

RB

AC

KIn

sert

L E F T

R I G H T

DEL

ETE

CA

NC

EL

AK

110

Con

trolle

r Nam

e S

cree

n N

avig

atio

n, R

ev 3

21 A

ug 2

008

10.4

55

pH

> 7.67-OFF 7.50s

ORP 490 -OFF 700s

_____

69.0f SW1OFFSW2OFF

Mai

n St

atus

Scr

een

>Name:Main Pool

System

Programming

Service

Data ( 8:441 )

Communications

Security Setup

Wizards

Serial # 123456

Con

figur

ation

Men

u, C

ontr

olle

r N

ame

AK

110

Con

trolle

r Nam

e S

cree

n N

avig

atio

n

Bac

k

Con

trolle

r N

ame

Set

up S

cree

n

Use

the

AK

110

keyp

ad to

ent

er in

ane

w c

ontro

ller n

ame.

The

con

trol

ler

nam

e m

ay c

onsi

st o

f a m

axim

um o

f14

alp

hanu

mer

ic c

hara

cter

s.Pr

ess t

he d

own

arrow

key

to re

turn

to th

e co

nfig

urat

ion

men

u.

Usi

ng th

e A

K11

0 K

eypa

d to

Nam

e th

e C

ontr

olle

r

1 Main Pool

U

v-Cancel Back-Ins

Ent

er

1 Main Pool

U

v-Cancel Back-Ins

1Main Pool

U

v-Cancel Back-Ins

Each

num

eric

key

is a

ssoc

iate

d w

ith th

ree

or m

ore

lette

rs o

f the

alp

habe

t, or

with

punc

tuat

ion

and

othe

r spe

cial

cha

ract

ers.

Succ

essi

ve k

eypre

sses

cyc

le th

roug

h th

eva

rious

cha

ract

ers a

ssoc

iate

d w

ith e

ach

key.

For

inst

ance

, pre

ss th

e [5

] key

onc

eto

dis

play

the n

umbe

r "5"

on-

scre

en.

Pres

s it a

seco

nd tim

e (w

hile

the

curs

or is

in th

e sa

me

posi

tion)

to d

ispl

ay th

e le

tter

"J".

The

third

key

pres

s di

spla

ys th

e le

tter

"K"

and

the

four

th ke

ypre

ss d

ispl

ays

the

lette

r "L"

. Pr

ess t

he k

ey o

ne m

ore

time

tore

turn

to th

e nu

mbe

r "5"

.

Each

of t

he a

rrow

keys

as

wel

l as

the

[Bac

k] a

nd [E

nter

] key

s pe

rfor

m s

peci

ficfu

nctio

ns w

ithin

the

Con

trol

ler

Nam

eSc

reen

.

Pres

s the

up

arro

w ke

y to

del

ete

the

char

acte

r at t

he c

urso

r pos

ition

.Pr

ess t

he le

ft ar

row k

ey to

mov

e th

ecu

rsor

one

spac

e to

the

left.

Pres

s the

righ

t arro

w k

ey to

mov

e th

ecu

rsor

one

spac

e to

the

righ

t.Pr

ess t

he d

own

arro

w ke

y to

can

cel o

ut o

fth

e co

ntro

ller n

amin

g pr

oces

s.Pr

ess t

he [B

ack]

key

to in

sert

a b

lank

spac

e at

the c

urso

r pos

ition

.Pr

ess t

he [E

nter]

key

to c

onfir

m th

eco

ntro

ller n

ame

as d

ispl

ayed

on-

scre

en.

Mov

ing

the

Cur

sor

Con

trolle

r Nam

e, U

pper

Cas

e T

ext

Con

trolle

r N

ame,

Low

er C

ase

Tex

t

Con

trolle

r Nam

e, C

urso

r to

Rig

ht

1 main Pool

u

v-Cancel Back-Ins

To c

hang

e be

twee

n up

per c

ase

and

low

er c

ase le

tters

, pre

ss th

e le

ft ar

row

key

unt

il th

ecu

rsor

is in

the

leftm

ost p

ositi

on, t

hen p

ress

the

left

arro

w k

ey o

nce

agai

n. T

he le

tter

"U"

in th

e lo

wer

righ

t cor

ner o

f the

disp

lay

indi

cate

s w

heth

er s

ubse

quen

t tex

t ent

ered

will

be

low

er c

ase o

r upp

er c

ase.

1 Main Pool

U

v-Cancel Back-Ins

Con

trolle

r Nam

e, C

urso

r to

Lef

t

An

uppe

r cas

e "U

" in

the

low

er ri

ght

corn

er o

f the

disp

lay

indi

cate

s th

atle

tters

ent

ered

in vi

a th

e ke

ypad

will

be d

ispl

ayed

in u

pper

cas

e.

A lo

wer

cas

e "u

" in

the

low

er ri

ght

corn

er o

f the

disp

lay

indi

cate

s th

atle

tters

ent

ered

in vi

a th

e ke

ypad

will

be d

ispl

ayed

in lo

wer

cas

e.

The

curs

or p

ositi

on is

indi

cate

d by

the

char

acte

r "1"

loca

ted

dire

ctly

abov

e th

e fir

st ch

arac

ter i

n th

eco

ntro

ller n

ame.

Pres

s the

righ

t arr

ow k

ey to

mov

eth

e cu

rsor

one

spa

ce to

the

righ

t.

The

curs

or h

as m

oved

one

spa

ce to

the

right

and

is n

ow p

ositi

oned

dire

ctly

abo

ve th

e se

cond

cha

ract

erin

the

cont

rolle

r nam

e.Pr

ess t

he le

ft ar

row

key

to re

turn

the

curs

or to

its p

revi

ous

posi

tion.

Cha

ngin

g be

twee

n U

pper

and

Low

er C

ase

Lette

rs

T U

V89

W X

Y Z

P Q

R S7 G

H I4

J K

L5M

N O6

A B

C2D

E F3

!$%&̂

*+1

,-#.@

_0C

onfir

m

ENTE

RB

AC

KIn

sert

L E F T

R I G H T

DEL

ETE

CA

NC

EL

AK

110

Con

trolle

r Nam

e S

cree

n N

avig

atio

n, R

ev 3

21 A

ug 2

008

56

pH

> 7.67-OFF 7.50s

ORP 490 -OFF 700s

_____

69.0f SW1OFFSW2OFF

Mai

n St

atus

Scr

een

>Time: 12:34:56

Date: 07/04/08

Day : Friday

Units: ENGLISH

Data Interval: 2

Sanitizer: Cl

On Delay 15

Backlight T 60

Temp Display: ON

Reset to Defaults

Normal Alarms

Name:Main Pool

>System

Programming

Service

Data ( 8:441 )

Communications

Security Setup

Wizards

Serial # 123456

Con

figur

atio

n M

enu,

Sys

tem

Sys

tem

Set

up S

cree

n, T

ime

Sys

tem

Set

up S

cree

n, F

riday

Sys

tem

Set

up S

cree

n, O

n D

elay

15s

Sys

tem

Set

up S

cree

n, B

ackl

ight

60s

Sys

tem

Set

up S

cree

n, T

emp

Dis

play

On

AK

110

Sys

tem

Set

up S

cree

n N

avig

atio

n

Time: 12:34:56

Date: 07/04/08

>Day : Friday

Units: ENGLISH

Data Interval: 2

Sanitizer: Cl

On Delay 15

Backlight T 60

Temp Display: ON

Reset to Defaults

Normal Alarms

Time: 12:34:56

Date: 07/04/08

Day : Friday

Units: ENGLISH

Data Interval: 2

Sanitizer: Cl

>On Delay 15

Backlight T 60

Temp Display: ON

Reset to Defaults

Normal Alarms

Time: 12:34:56

Date: 07/04/08

Day : Friday

Units: ENGLISH

Data Interval: 2

Sanitizer: Cl

On Delay 15

>Backlight T 60

Temp Display: ON

Reset to Defaults

Normal Alarms

Time: 12:34:56

Date: 07/04/08

Day : Friday

Units: ENGLISH

Data Interval: 2

Sanitizer: Cl

On Delay 15

Backlight T 60

>Temp Display: ON

Reset to Defaults

Normal Alarms

Sys

tem

Set

up S

cree

n, T

emp

Dis

play

Off

Time: 12:34:56

Date: 07/04/08

Day : Friday

Units: ENGLISH

Data Interval: 2

Sanitizer: Cl

On Delay 15

Backlight T 60

>Temp Display: OFF

Reset to Defaults

Normal Alarms

Ent

er

Sys

tem

Set

up S

cree

n, O

n D

elay

30s

Time: 12:34:56

Date: 07/04/08

Day : Friday

Units: ENGLISH

Data Interval: 2

Sanitizer: Br

>On Delay 30

Backlight T 60

Temp Display: ON

Reset to Defaults

Normal Alarms

Ent

er

Ent

er

Sys

tem

Set

up S

cree

n, B

ackl

ight

120

s Time: 12:34:56

Date: 07/04/08

Day : Friday

Units: ENGLISH

Data Interval: 2

Sanitizer: Cl

On Delay 15

>Backlight T 120

Temp Display: ON

Reset to Defaults

Normal Alarms

Ent

er

Sys

tem

Set

up S

cree

n, S

atur

day

Time: 12:34:56

Date: 07/04/08

>Day : Saturday

Units: ENGLISH

Data Interval: 2

Sanitizer: Cl

On Delay 15

Backlight T 60

Temp Display: ON

Reset to Defaults

Normal Alarms

Ent

er

Enter new value

Current: 12:34:56

12:34:56

v-Cancel ^

Tim

e S

etup

Scr

een

Time: 12:34:56

Date: 07/04/08

Day : Friday

Units: ENGLISH

Data Interval: 2

Sanitizer: Cl

On Delay 15

Backlight T 60

Temp Display: ON

>Reset to Defaults

Normal Alarms

Sys

tem

Set

up S

cree

n, R

eset

to D

efau

lts-Confirm Changes

-Reset to Defaults

NO:7 9:YES

Res

et to

Def

aults

Con

firm

atio

n S

cree

n

Ent

erB

ack

Ent

er 97 or

Pres

s the

[Ente

r] k

ey to

cyc

leth

roug

h th

e da

ys o

f the

wee

k.

Pres

s the

[Ent

er] k

ey to

set

the

time

the

LCD

bac

klig

ht re

mai

ns o

nfo

llow

ing

the

last k

eypr

ess

even

t.

Pres

s the

[Ent

er] k

ey to

set

the

post

pow

er-u

p co

ntro

l rel

ay d

elay

tim

efr

om 1

5s to

255

s, in

15s

incr

emen

ts.

Pres

s the

[Ent

er] k

ey to

turn

the

Mai

n St

atus

Scr

een

tem

pera

ture

disp

lay

on a

nd o

ff.

Pres

s the

[9] k

ey to

rese

t the

syst

em se

ttings

to th

e fa

ctor

yde

faul

t con

ditio

n or

the

[7]

key

to ca

ncel

.

Use

the

keyp

ad to

ent

er th

e tim

e.Th

e A

K11

0 us

es a

24-

hour

clo

ck.

Pres

s the

[Ent

er] k

ey to

con

firm

or

the

dow

n ar

row

key

to c

ance

l.

Sys

tem

Set

up S

cree

n, E

nglis

h U

nits

Time: 12:34:56

Date: 07/04/08

Day : Friday

>Units: ENGLISH

Data Interval: 2

Sanitizer: Cl

On Delay 15

Backlight T 60

Temp Display: ON

Reset to Defaults

Normal Alarms

Sys

tem

Set

up S

cree

n, M

etric

Uni

ts Time: 12:34:56

Date: 07/04/08

Day : Friday

>Units: METRIC

Data Interval: 2

Sanitizer: Cl

On Delay 15

Backlight T 60

Temp Display: ON

Reset to Defaults

Normal Alarms

Ent

er

Pres

s the

[Ente

r] k

ey to

sw

itch

betw

een

Engl

ish a

nd M

etri

c un

its o

fm

easu

rmen

t.

Sys

tem

Set

up S

cree

n, C

hlor

ine

Time: 12:34:56

Date: 07/04/08

Day : Friday

Units: ENGLISH

Data Interval: 2

>Sanitizer: Cl

On Delay 15

Backlight T 60

Temp Display: ON

Reset to Defaults

Normal Alarms

Sys

tem

Set

up S

cree

n, B

rom

ine

Time: 12:34:56

Date: 07/04/08

Day : Friday

Units: ENGLISH

Data Interval: 2

>Sanitizer: Br

On Delay 15

Backlight T 60

Temp Display: ON

Reset to Defaults

Normal Alarms

Ent

er

Pres

s the

[Ente

r] k

ey to

sw

itch

betw

een

Chlo

rine

and

Bro

min

esa

nitiz

er.

Bac

k

Ent

er

Time: 12:34:56

>Date: 07/04/08

Day : Friday

Units: ENGLISH

Data Interval: 2

Sanitizer: Cl

On Delay 15

Backlight T 60

Temp Display: ON

Reset to Defaults

Normal Alarms

Sys

tem

Set

up S

cree

n, D

ate

Enter new value

Current: 07/04/08

07/04/08

v-Cancel ^

Dat

e S

etup

Scr

een

The

Dat

e an

d D

ay o

f Wee

kpa

ram

eter

s are

ena

bled

onl

y if

the

optio

nal 9

0505

C R

eal T

ime

Clo

ckm

odul

e ha

s bee

n in

stal

led.

Use

the

keyp

ad to

ent

er th

e da

te.

Pres

s the

[Ent

er] k

ey to

con

firm

or

the

dow

n ar

row

key

to c

ance

l.

Sys

tem

Set

up S

cree

n, 2

Hou

r In

terv

als

Time: 12:34:56

Date: 07/04/08

Day : Friday

Units: ENGLISH

>Data Interval: 2

Sanitizer: Cl

On Delay 15

Backlight T 60

Temp Display: ON

Reset to Defaults

Normal Alarms

Sys

tem

Set

up S

cree

n, H

ourly

Inte

rval

s Time: 12:34:56

Date: 07/04/08

Day : Friday

Units: ENGLISH

>Data Interval: 1

Sanitizer: Cl

On Delay 15

Backlight T 60

Temp Display: ON

Reset to Defaults

Normal Alarms

Ent

er

Pres

s the

[Ent

er] k

ey to

reco

rdin

form

atio

n in

the

data

log

ever

ytw

o ho

urs o

r eve

ry h

our.

Sys

tem

Set

up S

cree

n, N

orm

al A

larm

s Time: 12:34:56

Date: 07/04/08

Day : Friday

Units: ENGLISH

Data Interval: 2

Sanitizer: Cl

On Delay 15

Backlight T 60

Temp Display: ON

Reset to Defaults

>Normal Alarms

Sys

tem

Set

up S

cree

n, P

erce

ntag

e A

larm

s Time: 12:34:56

Date: 07/04/08

Day : Friday

Units: ENGLISH

Data Interval: 2

Sanitizer: Cl

On Delay 15

Backlight T 60

Temp Display: OFF

Reset to Defaults

>Alarm Percentages

Ent

er

Pres

s the

[Ente

r] k

ey to

sw

itch

betw

een

norm

al a

larm

s (g

reat

er th

an&

less

than

) or p

erce

ntag

e al

arm

s(p

erce

ntag

e ab

out t

he s

etpo

int)

.

AK

110

Sys

tem

Set

up S

cree

n N

avig

atio

n, R

ev 3

21 A

ug 2

008

10.5

57

pH

> 7.67-OFF 7.50s

ORP 490 -OFF 700s

_____

69.0f SW1OFFSW2OFF

Mai

n St

atus

Scr

een

>Time: 12:34:56

Date: 07/04/08

Day : Friday

Units: ENGLISH

Data Interval: 2

Sanitizer: Cl

On Delay 15

Backlight T 60

Temp Display: ON

Reset to Defaults

Normal Alarms

Name:Main Pool

>System

Programming

Service

Data ( 8:441 )

Communications

Security Setup

Wizards

Serial # 123456

Con

figur

atio

n M

enu,

Sys

tem

Sys

tem

Set

up S

cree

n, T

ime

Sys

tem

Set

up S

cree

n, F

riday

Sys

tem

Set

up S

cree

n, O

n D

elay

15s

Sys

tem

Set

up S

cree

n, B

ackl

ight

60s

Sys

tem

Set

up S

cree

n, T

emp

Dis

play

On

AK

110

Sys

tem

Set

up S

cree

n N

avig

atio

n

Time: 12:34:56

Date: 07/04/08

>Day : Friday

Units: ENGLISH

Data Interval: 2

Sanitizer: Cl

On Delay 15

Backlight T 60

Temp Display: ON

Reset to Defaults

Normal Alarms

Time: 12:34:56

Date: 07/04/08

Day : Friday

Units: ENGLISH

Data Interval: 2

Sanitizer: Cl

>On Delay 15

Backlight T 60

Temp Display: ON

Reset to Defaults

Normal Alarms

Time: 12:34:56

Date: 07/04/08

Day : Friday

Units: ENGLISH

Data Interval: 2

Sanitizer: Cl

On Delay 15

>Backlight T 60

Temp Display: ON

Reset to Defaults

Normal Alarms

Time: 12:34:56

Date: 07/04/08

Day : Friday

Units: ENGLISH

Data Interval: 2

Sanitizer: Cl

On Delay 15

Backlight T 60

>Temp Display: ON

Reset to Defaults

Normal Alarms

Sys

tem

Set

up S

cree

n, T

emp

Dis

play

Off

Time: 12:34:56

Date: 07/04/08

Day : Friday

Units: ENGLISH

Data Interval: 2

Sanitizer: Cl

On Delay 15

Backlight T 60

>Temp Display: OFF

Reset to Defaults

Normal Alarms

Ent

er

Sys

tem

Set

up S

cree

n, O

n D

elay

30s

Time: 12:34:56

Date: 07/04/08

Day : Friday

Units: ENGLISH

Data Interval: 2

Sanitizer: Br

>On Delay 30

Backlight T 60

Temp Display: ON

Reset to Defaults

Normal Alarms

Ent

er

Ent

er

Sys

tem

Set

up S

cree

n, B

ackl

ight

120

s Time: 12:34:56

Date: 07/04/08

Day : Friday

Units: ENGLISH

Data Interval: 2

Sanitizer: Cl

On Delay 15

>Backlight T 120

Temp Display: ON

Reset to Defaults

Normal Alarms

Ent

er

Sys

tem

Set

up S

cree

n, S

atur

day

Time: 12:34:56

Date: 07/04/08

>Day : Saturday

Units: ENGLISH

Data Interval: 2

Sanitizer: Cl

On Delay 15

Backlight T 60

Temp Display: ON

Reset to Defaults

Normal Alarms

Ent

er

Enter new value

Current: 12:34:56

12:34:56

v-Cancel ^

Tim

e S

etup

Scr

een

Time: 12:34:56

Date: 07/04/08

Day : Friday

Units: ENGLISH

Data Interval: 2

Sanitizer: Cl

On Delay 15

Backlight T 60

Temp Display: ON

>Reset to Defaults

Normal Alarms

Sys

tem

Set

up S

cree

n, R

eset

to D

efau

lts-Confirm Changes

-Reset to Defaults

NO:7 9:YES

Res

et to

Def

aults

Con

firm

atio

n S

cree

n

Ent

erB

ack

Ent

er 97 or

Pres

s the

[Ente

r] k

ey to

cyc

leth

roug

h th

e da

ys o

f the

wee

k.

Pres

s the

[Ent

er] k

ey to

set

the

time

the

LCD

bac

klig

ht re

mai

ns o

nfo

llow

ing

the

last k

eypr

ess

even

t.

Pres

s the

[Ent

er] k

ey to

set

the

post

pow

er-u

p co

ntro

l rel

ay d

elay

tim

efr

om 1

5s to

255

s, in

15s

incr

emen

ts.

Pres

s the

[Ent

er] k

ey to

turn

the

Mai

n St

atus

Scr

een

tem

pera

ture

disp

lay

on a

nd o

ff.

Pres

s the

[9] k

ey to

rese

t the

syst

em se

ttings

to th

e fa

ctor

yde

faul

t con

ditio

n or

the

[7]

key

to ca

ncel

.

Use

the

keyp

ad to

ent

er th

e tim

e.Th

e A

K11

0 us

es a

24-

hour

clo

ck.

Pres

s the

[Ent

er] k

ey to

con

firm

or

the

dow

n ar

row

key

to c

ance

l.

Sys

tem

Set

up S

cree

n, E

nglis

h U

nits

Time: 12:34:56

Date: 07/04/08

Day : Friday

>Units: ENGLISH

Data Interval: 2

Sanitizer: Cl

On Delay 15

Backlight T 60

Temp Display: ON

Reset to Defaults

Normal Alarms

Sys

tem

Set

up S

cree

n, M

etric

Uni

ts Time: 12:34:56

Date: 07/04/08

Day : Friday

>Units: METRIC

Data Interval: 2

Sanitizer: Cl

On Delay 15

Backlight T 60

Temp Display: ON

Reset to Defaults

Normal Alarms

Ent

er

Pres

s the

[Ente

r] k

ey to

sw

itch

betw

een

Engl

ish a

nd M

etri

c un

its o

fm

easu

rmen

t.

Sys

tem

Set

up S

cree

n, C

hlor

ine

Time: 12:34:56

Date: 07/04/08

Day : Friday

Units: ENGLISH

Data Interval: 2

>Sanitizer: Cl

On Delay 15

Backlight T 60

Temp Display: ON

Reset to Defaults

Normal Alarms

Sys

tem

Set

up S

cree

n, B

rom

ine

Time: 12:34:56

Date: 07/04/08

Day : Friday

Units: ENGLISH

Data Interval: 2

>Sanitizer: Br

On Delay 15

Backlight T 60

Temp Display: ON

Reset to Defaults

Normal Alarms

Ent

er

Pres

s the

[Ente

r] k

ey to

sw

itch

betw

een

Chlo

rine

and

Bro

min

esa

nitiz

er.

Bac

k

Ent

er

Time: 12:34:56

>Date: 07/04/08

Day : Friday

Units: ENGLISH

Data Interval: 2

Sanitizer: Cl

On Delay 15

Backlight T 60

Temp Display: ON

Reset to Defaults

Normal Alarms

Sys

tem

Set

up S

cree

n, D

ate

Enter new value

Current: 07/04/08

07/04/08

v-Cancel ^

Dat

e S

etup

Scr

een

The

Dat

e an

d D

ay o

f Wee

kpa

ram

eter

s are

ena

bled

onl

y if

the

optio

nal 9

0505

C R

eal T

ime

Clo

ckm

odul

e ha

s bee

n in

stal

led.

Use

the

keyp

ad to

ent

er th

e da

te.

Pres

s the

[Ent

er] k

ey to

con

firm

or

the

dow

n ar

row

key

to c

ance

l.

Sys

tem

Set

up S

cree

n, 2

Hou

r In

terv

als

Time: 12:34:56

Date: 07/04/08

Day : Friday

Units: ENGLISH

>Data Interval: 2

Sanitizer: Cl

On Delay 15

Backlight T 60

Temp Display: ON

Reset to Defaults

Normal Alarms

Sys

tem

Set

up S

cree

n, H

ourly

Inte

rval

s Time: 12:34:56

Date: 07/04/08

Day : Friday

Units: ENGLISH

>Data Interval: 1

Sanitizer: Cl

On Delay 15

Backlight T 60

Temp Display: ON

Reset to Defaults

Normal Alarms

Ent

er

Pres

s the

[Ent

er] k

ey to

reco

rdin

form

atio

n in

the

data

log

ever

ytw

o ho

urs o

r eve

ry h

our.

Sys

tem

Set

up S

cree

n, N

orm

al A

larm

s Time: 12:34:56

Date: 07/04/08

Day : Friday

Units: ENGLISH

Data Interval: 2

Sanitizer: Cl

On Delay 15

Backlight T 60

Temp Display: ON

Reset to Defaults

>Normal Alarms

Sys

tem

Set

up S

cree

n, P

erce

ntag

e A

larm

s Time: 12:34:56

Date: 07/04/08

Day : Friday

Units: ENGLISH

Data Interval: 2

Sanitizer: Cl

On Delay 15

Backlight T 60

Temp Display: OFF

Reset to Defaults

>Alarm Percentages

Ent

er

Pres

s the

[Ente

r] k

ey to

sw

itch

betw

een

norm

al a

larm

s (g

reat

er th

an&

less

than

) or p

erce

ntag

e al

arm

s(p

erce

ntag

e ab

out t

he s

etpo

int)

.

AK

110

Sys

tem

Set

up S

cree

n N

avig

atio

n, R

ev 3

21 A

ug 2

008

58

pH

> 7.67-OFF 7.50s

ORP 490 -OFF 700s

_____

69.0f SW1OFFSW2OFF

Mai

n S

tatu

s S

cree

n Name:Main Pool

System

>Programming

Service

Data ( 8:441 )

Communications

Security Setup

Wizards

Serial # 123456

Con

figur

atio

n M

enu,

Pro

gram

min

g

AK

110

Pro

gram

min

g S

cree

n N

avig

atio

n, p

H M

ix T

ime

(1 o

f 2)

Ent

erB

ack

>1:pH, Mix Time

2:ORP, Mix Time

3:Not Used

A:Alarm

P:Pager1

P:Pager2

P:Pager3

P:Pager4

Pro

gram

ming

Set

up S

cree

n

pH M

ix, M

anua

l Fee

d T

ime

ManualTime 00:02:00<

Proportional% 10

On If pH> 7.50

On If pH< 0.00

Off if RLY On 2

On DELAY 00:00:20

On Time 00:01:00

MinTimeOff 00:05:00

Off if Sw1 Off-YES

Off if Sw2 On -NO

SetOvrfeed 00:00:00

Overfeed 01:00:00

Ent

erB

ack

pH M

ix ,

Pro

port

iona

l Fee

d P

erce

ntManualTime 00:02:00

Proportional% 10<

On If pH> 7.50

On If pH< 0.00

Off if RLY On 2

On DELAY 00:00:20

On Time 00:01:00

MinTimeOff 00:05:00

Off if Sw1 Off-YES

Off if Sw2 On -NO

SetOvrfeed 00:00:00

Overfeed 01:00:00

pH M

ix, A

cid F

eed

Set

poin

tManualTime 00:02:00

Proportional% 10

On If pH> 7.50<

On If pH< 0.00

Off if RLY On 2

On DELAY 00:00:20

On Time 00:01:00

MinTimeOff 00:05:00

Off if Sw1 Off-YES

Off if Sw2 On -NO

SetOvrfeed 00:00:00

Overfeed 01:00:00

pH M

ix, B

ase

Feed

Set

poin


Proportional% 10

On If pH> 7.50

On If pH< 0.00<

Off if RLY On 2

On DELAY 00:00:20

On Time 00:01:00

MinTimeOff 00:05:00

Off if Sw1 Off-YES

Off if Sw2 On -NO

SetOvrfeed 00:00:00

Overfeed 01:00:00

pH M

ix, M

inim

um T

ime

Off

ManualTime 00:02:00

Proportional% 10

On If pH> 7.50

On If pH< 0.00

Off if RLY On 2

On DELAY 00:00:20

On Time 00:01:00

MinTimeOff 00:05:00<

Off if Sw1 Off-YES

Off if Sw2 On -NO

SetOvrfeed 00:00:00

Overfeed 01:00:00

pH M

ix, F

eed

Off

if R

elay

is O

nManualTime 00:02:00

Proportional% 10

On If pH> 7.50

On If pH< 0.00

Off if RLY On 2<

On DELAY 00:00:20

On Time 00:01:00

MinTimeOff 00:05:00

Off if Sw1 Off-YES

Off if Sw2 On -NO

SetOvrfeed 00:00:00

Overfeed 01:00:00

pH M

ix, D

elay

Tim

eManualTime 00:02:00

Proportional% 10

On If pH> 7.50

On If pH< 0.00

Off if RLY On 2

On DELAY 00:00:20<

On Time 00:01:00

MinTimeOff 00:05:00

Off if Sw1 Off-YES

Off if Sw2 On -NO

SetOvrfeed 00:00:00

Overfeed 01:00:00

Enter new value

Current: 00:02:00

00:02:00

v-Cancel ^

Man

ual F

eed

Tim

e S

cree

n

Use

the

keyp

ad to

ente

r the

man

ual

chem

ical

feed

dur

atio

n.Pr

ess t

he [E

nter

] key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

Ent

er

Pro

porti

onal

Feed

Per

cent

Scr

een

Use

the

keyp

ad to

ent

er th

epr

opor

tiona

l fee

d pe

rcen

tage

.Pr

ess t

he [E

nter

] key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

Ent

er

Enter new value

Current: 10

10

v-Cancel ^

Enter new value

Current: 7.50

0.00

v-Cancel ^

Use

the

keyp

ad to

ent

er th

e pH

setp

oint

for a

cid

feed

con

trol

.Pr

ess t

he [E

nter

] key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

Ent

er

Aci

d Fe

ed S

etpo

int S

cree

n

Enter new value

Current: 0.00

0.00

v-Cancel ^

Use

the

keyp

ad to

ent

er th

e pH

setp

oint

for b

ase

feed

con

trol

.Pr

ess t

he [E

nter

] key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

Ent

er

Bas

e Fe

ed S

etpo

int S

cree

n

Use

the

keyp

ad to

ente

r the

num

ber

of a

sani

tizer

con

trol

rela

y to

prev

ent s

imul

tane

ous

chem

ical

feed

.Pr

ess t

he [E

nter

] key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

Ent

er

Feed

Off

if R

elay

is O

n S

cree

nEnter new value

Current: 2

2

v-Cancel ^

pH M

ix, F

eed

Off

if S

W1

is O

ffManualTime 00:02:00

Proportional% 10

On If pH> 7.50

On If pH< 0.00

Off if RLY On 2

On DELAY 00:00:20

On Time 00:01:00

MinTimeOff 00:05:00

Off if Sw1 Off-YES <

Off if Sw2 On -NO

SetOvrfeed 00:00:00

Overfeed 01:00:00

Use

the

keyp

ad to

ent

er th

e tim

ede

lay

betw

een

the s

etpo

int t

rigg

eran

d th

e ch

emic

al fe

ed c

ycle

sta

rt.

Pres

s the

[Ent

er] k

ey to

con

firm

or

the

dow

n ar

row

key

to c

ance

l.

Ent

er

Del

ay T

ime

Scr

een

Enter new value

Current: 00:00:20

00:00:20

v-Cancel ^

Use

the

keyp

ad to

ente

r the

am

ount

of ti

me

the

relay

will

be

held

off

durin

g a

feed

cyc

le to

allo

w m

ixin

g.Pr

ess t

he [E

nter

] key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

Ent

er

Min

imum

Tim

e Of

f Scr

een

Enter new value

Current: 00:05:00

00:05:00

v-Cancel ^

pH M

ix T

ime,

Inde

pend

ent o

f SW

1ManualTime 00:02:00

Proportional% 10

On If pH> 7.50

On If pH< 0.00

Off if RLY On 2

On DELAY 00:00:20

On Time 00:01:00

MinTimeOff 00:05:00

Off if Sw1 Off-NO

<Off if Sw2 On -NO

SetOvrfeed 00:00:00

Overfeed 01:00:00

Ent

er

Pres

s the

[Ent

er] k

ey to

mak

e th

ech

emic

al fe

ed d

epen

dent

or

inde

pend

ent o

f the

sta

tus

of th

e flo

wsw

itch

SW1.

Not

e:

The

rela

y 1

prog

ram

min

g m

enu

appe

ars i

n th

is fo

rmat

onl

y w

hen

rela

y 1

has b

een c

onfig

ured

for

"pH

Mix

Tim

e" c

ontr

ol.

Bac

k

To

pH

Mix

Tim

e (2

of 2

)

pH M

ix, O

n T

ime

ManualTime 00:02:00

Proportional% 10

On If pH> 7.50

On If pH< 0.00

Off if RLY On 2

On DELAY 00:00:20

On Time 00:01:00<

MinTimeOff 00:05:00

Off if Sw1 Off-YES

Off if Sw2 On -NO

SetOvrfeed 00:00:00

Overfeed 01:00:00

Use

the

keyp

ad to

ent

er th

em

axim

um c

hem

ical

feed

dur

atio

n.Pr

ess t

he [E

nter

] key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

Ent

er

On

Tim

e S

cree

nEnter new value

Current: 00:01:00

00:01:00

v-Cancel ^

pH M

ix, I

ndep

ende

nt o

f SW


Proportional% 10

On If pH> 7.50

On If pH< 0.00

Off if RLY On 2

On DELAY 00:00:20

On Time 00:01:00

MinTimeOff 00:05:00

Off if Sw1 Off-YES

Off if Sw2 On -NO <

SetOvrfeed 00:00:00

Overfeed 01:00:00

Ent

er

pH M

ix, F

eed

Off

if S

W2

is O


Proportional% 10

On If pH> 7.50

On If pH< 0.00

Off if RLY On 2

On DELAY 00:00:20

On Time 00:01:00

MinTimeOff 00:05:00

Off if Sw1 Off-YES

Off if Sw2 On -YES <

SetOvrfeed 00:00:00

Overfeed 01:00:00

Pres

s the

[Ent

er] k

ey to

mak

e th

ech

emic

al fe

ed d

epen

dent

or

inde

pend

ent o

f the

stat

us o

f sw

itch

2(S

W2.

)

AK

110

Pro

gram

min

g S

cree

n N

avig

atio

n, p

H M

ix T

ime,

Rev

322

Aug

200

8

10.6

59

pH

> 7.67-OFF 7.50s

ORP 490 -OFF 700s

_____

69.0f SW1OFFSW2OFF

Mai

n S

tatu

s S

cree

n Name:Main Pool

System

>Programming

Service

Data ( 8:441 )

Communications

Security Setup

Wizards

Serial # 123456

Con

figur

atio

n M

enu,

Pro

gram

min

g

AK

110

Pro

gram

min

g S

cree

n N

avig

atio

n, p

H M

ix T

ime

(1 o

f 2)

Ent

erB

ack

>1:pH, Mix Time

2:ORP, Mix Time

3:Not Used

A:Alarm

P:Pager1

P:Pager2

P:Pager3

P:Pager4

Pro

gram

ming

Set

up S

cree

n

pH M

ix, M

anua

l Fee

d T

ime


Proportional% 10

On If pH> 7.50

On If pH< 0.00

Off if RLY On 2

On DELAY 00:00:20

On Time 00:01:00

MinTimeOff 00:05:00

Off if Sw1 Off-YES

Off if Sw2 On -NO

SetOvrfeed 00:00:00

Overfeed 01:00:00

Ent

erB

ack

pH M

ix ,

Pro

port

iona

l Fee

d P

erce

ntManualTime 00:02:00

Proportional% 10<

On If pH> 7.50

On If pH< 0.00

Off if RLY On 2

On DELAY 00:00:20

On Time 00:01:00

MinTimeOff 00:05:00

Off if Sw1 Off-YES

Off if Sw2 On -NO

SetOvrfeed 00:00:00

Overfeed 01:00:00

pH M

ix, A

cid F

eed

Set

poin


Proportional% 10

On If pH> 7.50<

On If pH< 0.00

Off if RLY On 2

On DELAY 00:00:20

On Time 00:01:00

MinTimeOff 00:05:00

Off if Sw1 Off-YES

Off if Sw2 On -NO

SetOvrfeed 00:00:00

Overfeed 01:00:00

pH M

ix, B

ase

Feed

Set

poin


Proportional% 10

On If pH> 7.50

On If pH< 0.00<

Off if RLY On 2

On DELAY 00:00:20

On Time 00:01:00

MinTimeOff 00:05:00

Off if Sw1 Off-YES

Off if Sw2 On -NO

SetOvrfeed 00:00:00

Overfeed 01:00:00

pH M

ix, M

inim

um T

ime

Off

ManualTime 00:02:00

Proportional% 10

On If pH> 7.50

On If pH< 0.00

Off if RLY On 2

On DELAY 00:00:20

On Time 00:01:00


Off if Sw1 Off-YES

Off if Sw2 On -NO

SetOvrfeed 00:00:00

Overfeed 01:00:00

pH M

ix, F

eed

Off

if R

elay

is O


Proportional% 10

On If pH> 7.50

On If pH< 0.00

Off if RLY On 2<

On DELAY 00:00:20

On Time 00:01:00

MinTimeOff 00:05:00

Off if Sw1 Off-YES

Off if Sw2 On -NO

SetOvrfeed 00:00:00

Overfeed 01:00:00

pH M

ix, D

elay

Tim


Proportional% 10

On If pH> 7.50

On If pH< 0.00

Off if RLY On 2

On DELAY 00:00:20<

On Time 00:01:00

MinTimeOff 00:05:00

Off if Sw1 Off-YES

Off if Sw2 On -NO

SetOvrfeed 00:00:00

Overfeed 01:00:00

Enter new value

Current: 00:02:00

00:02:00

v-Cancel ^

Man

ual F

eed

Tim

e S

cree

n

Use

the

keyp

ad to

ente

r the

man

ual

chem

ical

feed

dur

atio

n.Pr

ess t

he [E

nter

] key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

Ent

er

Pro

porti

onal

Feed

Per

cent

Scr

een

Use

the

keyp

ad to

ent

er th

epr

opor

tiona

l fee

d pe

rcen

tage

.Pr

ess t

he [E

nter

] key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

Ent

er

Enter new value

Current: 10

10

v-Cancel ^

Enter new value

Current: 7.50

0.00

v-Cancel ^

Use

the

keyp

ad to

ent

er th

e pH

setp

oint

for a

cid

feed

con

trol

.Pr

ess t

he [E

nter

] key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

Ent

er

Aci

d Fe

ed S

etpo

int S

cree

n

Enter new value

Current: 0.00

0.00

v-Cancel ^

Use

the

keyp

ad to

ent

er th

e pH

setp

oint

for b

ase

feed

con

trol

.Pr

ess t

he [E

nter

] key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

Ent

er

Bas

e Fe

ed S

etpo

int S

cree

n

Use

the

keyp

ad to

ente

r the

num

ber

of a

sani

tizer

con

trol

rela

y to

prev

ent s

imul

tane

ous

chem

ical

feed

.Pr

ess t

he [E

nter

] key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

Ent

er

Feed

Off

if R

elay

is O

n S

cree

nEnter new value

Current: 2

2

v-Cancel ^

pH M

ix, F

eed

Off

if S

W1

is O


Proportional% 10

On If pH> 7.50

On If pH< 0.00

Off if RLY On 2

On DELAY 00:00:20

On Time 00:01:00

MinTimeOff 00:05:00


Off if Sw2 On -NO

SetOvrfeed 00:00:00

Overfeed 01:00:00

Use

the

keyp

ad to

ent

er th

e tim

ede

lay

betw

een

the s

etpo

int t

rigg

eran

d th

e ch

emic

al fe

ed c

ycle

sta

rt.

Pres

s the

[Ent

er] k

ey to

con

firm

or

the

dow

n ar

row

key

to c

ance

l.

Ent

er

Del

ay T

ime

Scr

een

Enter new value

Current: 00:00:20

00:00:20

v-Cancel ^

Use

the

keyp

ad to

ente

r the

am

ount

of ti

me

the

relay

will

be

held

off

durin

g a

feed

cyc

le to

allo

w m

ixin

g.Pr

ess t

he [E

nter

] key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

Ent

er

Min

imum

Tim

e Of

f Scr

een

Enter new value

Current: 00:05:00

00:05:00

v-Cancel ^

pH M

ix T

ime,

Inde

pend

ent o

f SW


Proportional% 10

On If pH> 7.50

On If pH< 0.00

Off if RLY On 2

On DELAY 00:00:20

On Time 00:01:00

MinTimeOff 00:05:00

Off if Sw1 Off-NO

<Off if Sw2 On -NO

SetOvrfeed 00:00:00

Overfeed 01:00:00

Ent

er

Pres

s the

[Ent

er] k

ey to

mak

e th

ech

emic

al fe

ed d

epen

dent

or

inde

pend

ent o

f the

sta

tus

of th

e flo

wsw

itch

SW1.

Not

e:

The

rela

y 1

prog

ram

min

g m

enu

appe

ars i

n th

is fo

rmat

onl

y w

hen

rela

y 1

has b

een c

onfig

ured

for

"pH

Mix

Tim

e" c

ontr

ol.

Bac

k

To

pH

Mix

Tim

e (2

of 2

)

pH M

ix, O

n T

ime

ManualTime 00:02:00

Proportional% 10

On If pH> 7.50

On If pH< 0.00

Off if RLY On 2

On DELAY 00:00:20

On Time 00:01:00<

MinTimeOff 00:05:00

Off if Sw1 Off-YES

Off if Sw2 On -NO

SetOvrfeed 00:00:00

Overfeed 01:00:00

Use

the

keyp

ad to

ent

er th

em

axim

um c

hem

ical

feed

dur

atio

n.Pr

ess t

he [E

nter

] key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

Ent

er

On

Tim

e S

cree

nEnter new value

Current: 00:01:00

00:01:00

v-Cancel ^

pH M

ix, I

ndep

ende

nt o

f SW


Proportional% 10

On If pH> 7.50

On If pH< 0.00

Off if RLY On 2

On DELAY 00:00:20

On Time 00:01:00

MinTimeOff 00:05:00

Off if Sw1 Off-YES

Off if Sw2 On -NO <

SetOvrfeed 00:00:00

Overfeed 01:00:00

Ent

er

pH M

ix, F

eed

Off

if S

W2

is O


Proportional% 10

On If pH> 7.50

On If pH< 0.00

Off if RLY On 2

On DELAY 00:00:20

On Time 00:01:00

MinTimeOff 00:05:00

Off if Sw1 Off-YES

Off if Sw2 On -YES <

SetOvrfeed 00:00:00

Overfeed 01:00:00

Pres

s the

[Ent

er] k

ey to

mak

e th

ech

emic

al fe

ed d

epen

dent

or

inde

pend

ent o

f the

stat

us o

f sw

itch

2(S

W2.

)

AK

110

Pro

gram

min

g S

cree

n N

avig

atio

n, p

H M

ix T

ime,

Rev

322

Aug

200

8

60

pH

> 7.67-OFF 7.50s

ORP 490 -OFF 700s

_____

69.0f SW1OFFSW2OFF

Mai

n S

tatu

s S

cree

n Name:Main Pool

System

>Programming

Service

Data ( 8:441 )

Communications

Security Setup

Wizards

Serial # 123456

Con

figur

atio

n M

enu,

Pro

gram

min

g

AK

110

Pro

gram

min

g S

cree

n N

avig

atio

n, p

H C

ycle

Tim

e (1

of 2

)

Ent

erB

ack

>1:pH, Cycle Time

2:ORP, Cycle Time

3:Not Used

A:Alarm

P:Pager1

P:Pager2

P:Pager3

P:Pager4

Pro

gram

ming

Set

up S

cree

n

pH C

ycle

, Man

ual F

eed

Tim

e

Ent

erB

ack

pH C

ycle

, Pro

port

iona

l Fee

d P

erce

nt

pH C

ycle

, Acid

Fee

d S

etpo

int

pH C

ycle

, Bas

e Fe

ed S

etpo

int

pH C

ycle

, Cyc

le T

ime

pH C

ycle

, On

Lim

itEnter new value

Current: 00:02:00

00:02:00

v-Cancel ^

Man

ual F

eed

Tim

e S

cree

n

Use

the

keyp

ad to

ente

r the

man

ual

chem

ical

feed

dur

atio

n.Pr

ess t

he [E

nter

] key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

Ent

er

Pro

porti

onal

Feed

Per

cent

Scr

een

Use

the

keyp

ad to

ent

er th

epr

opor

tiona

l fee

d pe

rcen

tage

.Pr

ess t

he [E

nter

] key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

Ent

er

Enter new value

Current: 10

10

v-Cancel ^

Enter new value

Current: 7.50

0.00

v-Cancel ^

Use

the

keyp

ad to

ent

er th

e pH

setp

oint

for a

cid

feed

con

trol

.Pr

ess t

he [E

nter

] key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

Ent

er

Aci

d Fe

ed S

etpo

int S

cree

n

Enter new value

Current: 0.00

0.00

v-Cancel ^

Use

the

keyp

ad to

ent

er th

e pH

setp

oint

for b

ase

feed

con

trol

.Pr

ess t

he [E

nter

] key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

Ent

er

Bas

e Fe

ed S

etpo

int S

cree

n

Ent

er

pH C

ycle

, Ind

epen

dent

of S

W2

pH C

ycle

, Fee

d O

ff if

SW

1 is

Off

Ent

er

Cyc

le T

ime

Scr

een

Enter new value

Current: 00:01:00

00:01:00

v-Cancel ^

On

Lim

it S

cree

nEnter new value

Current: 00:00:20

00:00:20

v-Cancel ^

Ent

er

pH C

ycle

, Ind

epen

dent

of S

W1

Ent

er

Pres

s the

[Ent

er] k

ey to

mak

e th

ech

emic

al fe

ed d

epen

dent

or

inde

pend

ent o

f the

sta

tus

of th

e flo

wsw

itch

SW1.

ManualTime 00:02:00

Proportional% 10

On If pH> 7.50

On If pH< 0.00

Off if RLY On 2

Cycle Time 00:01:00<

On Limit 00:00:20

Off if Sw1 Off-YES

Off if Sw2 On -NO

SetOvrfeed 00:00:00

Overfeed 01:00:00

ManualTime 00:02:00

Proportional% 10

On If pH> 7.50

On If pH< 0.00

Off if RLY On 2

Cycle Time 00:01:00

On Limit 00:00:20<

Off if Sw1 Off-YES

Off if Sw2 On -NO

SetOvrfeed 00:00:00

Overfeed 01:00:00


Proportional% 10

On If pH> 7.50

On If pH< 0.00

Off if RLY On 2

Cycle Time 00:01:00

On Limit 00:00:20

Off if Sw1 Off-YES

Off if Sw2 On -NO

SetOvrfeed 00:00:00

Overfeed 01:00:00

ManualTime 00:02:00

Proportional% 10<

On If pH> 7.50

On If pH< 0.00

Off if RLY On 2

Cycle Time 00:01:00

On Limit 00:00:20

Off if Sw1 Off-YES

Off if Sw2 On -NO

SetOvrfeed 00:00:00

Overfeed 01:00:00

ManualTime 00:02:00

Proportional% 10

On If pH> 7.50<

On If pH< 0.00

Off if RLY On 2

Cycle Time 00:01:00

On Limit 00:00:20

Off if Sw1 Off-YES

Off if Sw2 On -NO

SetOvrfeed 00:00:00

Overfeed 01:00:00

ManualTime 00:02:00

Proportional% 10

On If pH> 7.50

On If pH< 0.00<

Off if RLY On 2

Cycle Time 00:01:00

On Limit 00:00:20

Off if Sw1 Off-YES

Off if Sw2 On -NO

SetOvrfeed 00:00:00

Overfeed 01:00:00

ManualTime 00:02:00

Proportional% 10

On If pH> 7.50

On If pH< 0.00

Off if RLY On 2

Cycle Time 00:01:00

On Limit 00:00:20


Off if Sw2 On -NO

SetOvrfeed 00:00:00

Overfeed 01:00:00

ManualTime 00:02:00

Proportional% 10

On If pH> 7.50

On If pH< 0.00

Off if RLY On 2

Cycle Time 00:01:00

On Limit 00:00:20

Off if Sw1 Off-YES

Off if Sw2 On –NO

<SetOvrfeed 00:00:00

Overfeed 01:00:00

ManualTime 00:02:00

Proportional% 10

On If pH> 7.50

On If pH< 0.00

Off if RLY On 2

Cycle Time 00:01:00

On Limit 00:00:20

Off if Sw1 Off-NO <

Off if Sw2 On -NO

SetOvrfeed 00:00:00

Overfeed 01:00:00

Not

e:

The

rela

y 1

prog

ram

min

g m

enu

appe

ars i

n th

is fo

rmat

onl

y w

hen

rela

y 1

has b

een c

onfig

ured

for

"pH

Cyc

le T

ime"

con

trol

.

Use

the

keyp

ad to

ent

er th

e cy

cle

dura

tion,

incl

udin

g bot

h ch

emic

alfe

ed O

N ti

me

and f

eed

OFF

tim

e.Pr

ess t

he [E

nter

] key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

Use

the

keyp

ad to

ent

er th

em

axim

um c

hem

ical

feed

dur

atio

n.Pr

ess t

he [E

nter

] key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

Bac

k

pH C

ycle

, Fee

d O

ff if

Rel

ay is

On

Ent

er

ManualTime 00:02:00

Proportional% 10

On If pH> 7.50

On If pH< 0.00

Off if RLY On 2<

Cycle Time 00:01:00

On Limit 00:00:20

Off if Sw1 Off-YES

Off if Sw2 On -NO

SetOvrfeed 00:00:00

Overfeed 01:00:00

Use

the

keyp

ad to

ente

r the

num

ber

of a

sani

tizer

con

trol

rela

y to

prev

ent s

imul

tane

ous

chem

ical

feed

.Pr

ess t

he [E

nter

] key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

Feed

Off

if R

elay

is O

n S

cree

nEnter new value

Current: 2

2

v-Cancel ^

pH C

ycle

, Fee

d O

ff if

SW

2 is

On

Pres

s the

[Ent

er] k

ey to

mak

e th

ech

emic

al fe

ed d

epen

dent

or

inde

pend

ent o

f the

stat

us o

f sw

itch

2(S

W2.

)

ManualTime 00:02:00

Proportional% 10

On If pH> 7.50

On If pH< 0.00

Off if RLY On 2

Cycle Time 00:01:00

On Limit 00:00:20

Off if Sw1 Off-NO

Off if Sw2 On –YES <

SetOvrfeed 00:00:00

Overfeed 01:00:00

pH C

ycle

, Set

poin

t Ove

rfee

d

Use

the

keyp

ad to

ente

r the

runt

ime

allo

wed

to re

ach 5

% o

f set

poin

t.D

isab

les r

elay

if se

tpoi

nt is

not

met

.Pr

ess t

he [E

nter

] key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

Ent

er

Enter new value

Current: 00:00:00

00:00:00

v-Cancel ^

Set

poin

t Ove

rfee

d S

cree


Proportional% 10

On If pH> 7.50

On If pH< 0.00

Off if RLY On 2

Cycle Time 00:01:00

On Limit 00:00:20

Off if Sw1 Off-YES

Off if Sw2 On -NO

SetOvrfeed 00:00:00<

Overfeed 01:00:00

To

pH

Cyc

le T

ime (

2 of

2)

AK

110

Pro

gram

min

g S

cree

n N

avig

atio

n, p

H C

ycle

Tim

e, R

ev 3

25 A

ug 2

008

10.7

61

pH

> 7.67-OFF 7.50s

ORP 490 -OFF 700s

_____

69.0f SW1OFFSW2OFF

Mai

n S

tatu

s S

cree

n Name:Main Pool

System

>Programming

Service

Data ( 8:441 )

Communications

Security Setup

Wizards

Serial # 123456

Con

figur

atio

n M

enu,

Pro

gram

min

g

AK

110

Pro

gram

min

g S

cree

n N

avig

atio

n, p

H C

ycle

Tim

e (1

of 2

)

Ent

erB

ack

>1:pH, Cycle Time

2:ORP, Cycle Time

3:Not Used

A:Alarm

P:Pager1

P:Pager2

P:Pager3

P:Pager4

Pro

gram

ming

Set

up S

cree

n

pH C

ycle

, Man

ual F

eed

Tim

e

Ent

erB

ack

pH C

ycle

, Pro

port

iona

l Fee

d P

erce

nt

pH C

ycle

, Acid

Fee

d S

etpo

int

pH C

ycle

, Bas

e Fe

ed S

etpo

int

pH C

ycle

, Cyc

le T

ime

pH C

ycle

, On

Lim

itEnter new value

Current: 00:02:00

00:02:00

v-Cancel ^

Man

ual F

eed

Tim

e S

cree

n

Use

the

keyp

ad to

ente

r the

man

ual

chem

ical

feed

dur

atio

n.Pr

ess t

he [E

nter

] key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

Ent

er

Pro

porti

onal

Feed

Per

cent

Scr

een

Use

the

keyp

ad to

ent

er th

epr

opor

tiona

l fee

d pe

rcen

tage

.Pr

ess t

he [E

nter

] key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

Ent

er

Enter new value

Current: 10

10

v-Cancel ^

Enter new value

Current: 7.50

0.00

v-Cancel ^

Use

the

keyp

ad to

ent

er th

e pH

setp

oint

for a

cid

feed

con

trol

.Pr

ess t

he [E

nter

] key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

Ent

er

Aci

d Fe

ed S

etpo

int S

cree

n

Enter new value

Current: 0.00

0.00

v-Cancel ^

Use

the

keyp

ad to

ent

er th

e pH

setp

oint

for b

ase

feed

con

trol

.Pr

ess t

he [E

nter

] key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

Ent

er

Bas

e Fe

ed S

etpo

int S

cree

n

Ent

er

pH C

ycle

, Ind

epen

dent

of S

W2

pH C

ycle

, Fee

d O

ff if

SW

1 is

Off

Ent

er

Cyc

le T

ime

Scr

een

Enter new value

Current: 00:01:00

00:01:00

v-Cancel ^

On

Lim

it S

cree

nEnter new value

Current: 00:00:20

00:00:20

v-Cancel ^

Ent

er

pH C

ycle

, Ind

epen

dent

of S

W1

Ent

er

Pres

s the

[Ent

er] k

ey to

mak

e th

ech

emic

al fe

ed d

epen

dent

or

inde

pend

ent o

f the

sta

tus

of th

e flo

wsw

itch

SW1.

ManualTime 00:02:00

Proportional% 10

On If pH> 7.50

On If pH< 0.00

Off if RLY On 2


On Limit 00:00:20

Off if Sw1 Off-YES

Off if Sw2 On -NO

SetOvrfeed 00:00:00

Overfeed 01:00:00

ManualTime 00:02:00

Proportional% 10

On If pH> 7.50

On If pH< 0.00

Off if RLY On 2

Cycle Time 00:01:00

On Limit 00:00:20<

Off if Sw1 Off-YES

Off if Sw2 On -NO

SetOvrfeed 00:00:00

Overfeed 01:00:00


Proportional% 10

On If pH> 7.50

On If pH< 0.00

Off if RLY On 2

Cycle Time 00:01:00

On Limit 00:00:20

Off if Sw1 Off-YES

Off if Sw2 On -NO

SetOvrfeed 00:00:00

Overfeed 01:00:00

ManualTime 00:02:00

Proportional% 10<

On If pH> 7.50

On If pH< 0.00

Off if RLY On 2

Cycle Time 00:01:00

On Limit 00:00:20

Off if Sw1 Off-YES

Off if Sw2 On -NO

SetOvrfeed 00:00:00

Overfeed 01:00:00

ManualTime 00:02:00

Proportional% 10

On If pH> 7.50<

On If pH< 0.00

Off if RLY On 2

Cycle Time 00:01:00

On Limit 00:00:20

Off if Sw1 Off-YES

Off if Sw2 On -NO

SetOvrfeed 00:00:00

Overfeed 01:00:00

ManualTime 00:02:00

Proportional% 10

On If pH> 7.50

On If pH< 0.00<

Off if RLY On 2

Cycle Time 00:01:00

On Limit 00:00:20

Off if Sw1 Off-YES

Off if Sw2 On -NO

SetOvrfeed 00:00:00

Overfeed 01:00:00

ManualTime 00:02:00

Proportional% 10

On If pH> 7.50

On If pH< 0.00

Off if RLY On 2

Cycle Time 00:01:00

On Limit 00:00:20


Off if Sw2 On -NO

SetOvrfeed 00:00:00

Overfeed 01:00:00

ManualTime 00:02:00

Proportional% 10

On If pH> 7.50

On If pH< 0.00

Off if RLY On 2

Cycle Time 00:01:00

On Limit 00:00:20

Off if Sw1 Off-YES

Off if Sw2 On –NO

<SetOvrfeed 00:00:00

Overfeed 01:00:00

ManualTime 00:02:00

Proportional% 10

On If pH> 7.50

On If pH< 0.00

Off if RLY On 2

Cycle Time 00:01:00

On Limit 00:00:20

Off if Sw1 Off-NO <

Off if Sw2 On -NO

SetOvrfeed 00:00:00

Overfeed 01:00:00

Not

e:

The

rela

y 1

prog

ram

min

g m

enu

appe

ars i

n th

is fo

rmat

onl

y w

hen

rela

y 1

has b

een c

onfig

ured

for

"pH

Cyc

le T

ime"

con

trol

.

Use

the

keyp

ad to

ent

er th

e cy

cle

dura

tion,

incl

udin

g bot

h ch

emic

alfe

ed O

N ti

me

and f

eed

OFF

tim

e.Pr

ess t

he [E

nter

] key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

Use

the

keyp

ad to

ent

er th

em

axim

um c

hem

ical

feed

dur

atio

n.Pr

ess t

he [E

nter

] key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

Bac

k

pH C

ycle

, Fee

d O

ff if

Rel

ay is

On

Ent

er

ManualTime 00:02:00

Proportional% 10

On If pH> 7.50

On If pH< 0.00

Off if RLY On 2<

Cycle Time 00:01:00

On Limit 00:00:20

Off if Sw1 Off-YES

Off if Sw2 On -NO

SetOvrfeed 00:00:00

Overfeed 01:00:00

Use

the

keyp

ad to

ente

r the

num

ber

of a

sani

tizer

con

trol

rela

y to

prev

ent s

imul

tane

ous

chem

ical

feed

.Pr

ess t

he [E

nter

] key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

Feed

Off

if R

elay

is O

n S

cree

nEnter new value

Current: 2

2

v-Cancel ^

pH C

ycle

, Fee

d O

ff if

SW

2 is

On

Pres

s the

[Ent

er] k

ey to

mak

e th

ech

emic

al fe

ed d

epen

dent

or

inde

pend

ent o

f the

stat

us o

f sw

itch

2(S

W2.

)

ManualTime 00:02:00

Proportional% 10

On If pH> 7.50

On If pH< 0.00

Off if RLY On 2

Cycle Time 00:01:00

On Limit 00:00:20

Off if Sw1 Off-NO


SetOvrfeed 00:00:00

Overfeed 01:00:00

pH C

ycle

, Set

poin

t Ove

rfee

d

Use

the

keyp

ad to

ente

r the

runt

ime

allo

wed

to re

ach 5

% o

f set

poin

t.D

isab

les r

elay

if se

tpoi

nt is

not

met

.Pr

ess t

he [E

nter

] key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

Ent

er

Enter new value

Current: 00:00:00

00:00:00

v-Cancel ^

Set

poin

t Ove

rfee

d S

cree


Proportional% 10

On If pH> 7.50

On If pH< 0.00

Off if RLY On 2

Cycle Time 00:01:00

On Limit 00:00:20

Off if Sw1 Off-YES

Off if Sw2 On -NO


Overfeed 01:00:00

To

pH

Cyc

le T

ime (

2 of

2)

AK

110

Pro

gram

min

g S

cree

n N

avig

atio

n, p

H C

ycle

Tim

e, R

ev 3

25 A

ug 2

008

62

pH

> 7.67-OFF 7.50s

ORP 490 -OFF 700s

_____

69.0f SW1OFFSW2OFF

Mai

n St

atus

Scr

een

Name:Main Pool

System

>Programming

Service

Data ( 8:441 )

Communications

Security Setup

Wizards

Serial # 123456

Con

figur

atio

n M

enu,

Pro

gram

min

g

AK

110

Pro

gram

min

g S

cree

n N

avig

atio

n, O

RP

Mix

Tim

e (1

of 2

)

Ent

erB

ack

1:pH, Mix Time

>2:ORP, Mix Time

3:Not Used

A:Alarm

P:Pager1

P:Pager2

P:Pager3

P:Pager4

Pro

gram

min

g S

etup

Scr

een

OR

P M

ix, M

anua

l Fee

d T

ime

Ent

erB

ack

OR

P M

ix, P

ropo

rtio

nal F

eed

Per

cent

OR

P M

ix, L

ow O

RP

Set

poin

t

OR

P M

ix, F

eed

Off

if R

elay

is O

n

Enter new value

Current: 00:02:00

00:02:00

v-Cancel ^

Man

ual F

eed

Tim

e S

cree

n

Use

the

keyp

ad to

ent

er th

e m

anua

lsa

nitiz

er fe

ed d

urat

ion.

Pres

s the

[Ent

er] k

ey to

con

firm

or

the

dow

n ar

row

key

to c

ance

l.

Ent

er

Pro

porti

onal

Fee

d P

erce

nt S

cree

n

Use

the

keyp

ad to

ent

er th

epr

opor

tiona

l fee

d pe

rcen

tage

.Pr

ess t

he [E

nter]

key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

Ent

er

Enter new value

Current: 5

5

v-Cancel ^

Enter new value

Current: 700

700

v-Cancel ^

Use

the

keyp

ad to

ent

er th

e O

RP

setp

oint

for s

aniti

zer f

eed

cont

rol.

Pres

s the

[Ent

er] k

ey to

con

firm

or

the

dow

n ar

row

key

to c

ance

l.

Ent

er

Low

OR

P S

etpo

int S

cree

n

Use

the

keyp

ad to

ent

er th

e nu

mbe

rof

the

pH fe

ed co

ntro

l rel

ay to

prev

ent s

imul

taneo

us c

hem

ical

feed

.Pr

ess t

he [E

nter]

key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

Feed

Off

if R

elay

is O

n S

cree

nEnter new value

Current: 1

1

v-Cancel ^

Use

the

keyp

ad to

ent

er th

e tim

ede

lay

betw

een

the s

etpo

int t

rigg

eran

d th

e sa

nitiz

er fe

ed c

ycle

sta

rt.

Pres

s the

[Ent

er] k

ey to

con

firm

or

the

dow

n ar

row

key

to c

ance

l.

Ent

er

Del

ay T

ime

Scr

een

Enter new value

Current: 00:00:20

00:00:20

v-Cancel ^

Ent

er

Ent

er


Proportional% 5

On If ORP< 700

Off If pH> 7.95

Off If pH< 0.00

Off if RLY On 1

On DELAY 00:00:20

On Time 00:01:00

MinTimeOff 00:07:00

Off if Sw1 Off-YES

Off if Sw2 On -NO

SetOvrfeed 00:00:00

Overfeed 03:00:00

ManualTime 00:02:00

Proportional% 5<

On If ORP< 700

Off If pH> 7.95

Off If pH< 0.00

Off if RLY On 1

On DELAY 00:00:20

On Time 00:01:00

MinTimeOff 00:07:00

Off if Sw1 Off-YES

Off if Sw2 On -NO

SetOvrfeed 00:00:00

Overfeed 03:00:00

ManualTime 00:02:00

Proportional% 5

On If ORP< 700<

Off If pH> 7.95

Off If pH< 0.00

Off if RLY On 1

On DELAY 00:00:20

On Time 00:01:00

MinTimeOff 00:07:00

Off if Sw1 Off-YES

Off if Sw2 On -NO

SetOvrfeed 00:00:00

Overfeed 03:00:00

OR

P M

ix, L

ow p

H S

etpo

int

ManualTime 00:02:00

Proportional% 5

On If ORP< 700

Off If pH> 7.95

Off If pH< 0.00<

Off if RLY On 1

On DELAY 00:00:20

On Time 00:01:00

MinTimeOff 00:07:00

Off if Sw1 Off-YES

Off if Sw2 On -NO

SetOvrfeed 00:00:00

Overfeed 03:00:00

ManualTime 00:02:00

Proportional% 5

On If ORP< 700

Off If pH> 7.95

Off If pH< 0.00

Off if RLY On 1<

On DELAY 00:00:20

On Time 00:01:00

MinTimeOff 00:07:00

Off if Sw1 Off-YES

Off if Sw2 On -NO

SetOvrfeed 00:00:00

Overfeed 03:00:00

OR

P M

ix, D

elay

Tim


Proportional% 5

On If ORP< 700

Off If pH> 7.95

Off If pH< 0.00

Off if RLY On 1

On DELAY 00:00:20<

On Time 00:01:00

MinTimeOff 00:07:00

Off if Sw1 Off-YES

Off if Sw2 On -NO

SetOvrfeed 00:00:00

Overfeed 03:00:00

Enter new value

Current: 0.00

0.00

v-Cancel ^

Low

pH

Set

poin

t Scr

een

Use

the

keyp

ad to

ent

er th

e lo

w p

Hva

lue

unde

r whi

ch th

e sa

nitiz

er w

illno

t fee

d.Pr

ess t

he [E

nter]

key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

To

OR

P M

ix T

ime

(2 o

f 2)

Not

e:

The

rela

y 2

prog

ram

min

g m

enu

appe

ars i

n th

is fo

rmat

onl

y w

hen

rela

y 2

has b

een

conf

igur

ed fo

r"O

RP

Mix

Tim

e" c

ontr

ol.

Bac

k

Ent

er

OR

P M

ix, H

igh

pH S

etpo

int

ManualTime 00:02:00

Proportional% 5

On If ORP< 700

Off If pH> 7.95<

Off If pH< 0.00

Off if RLY On 1

On DELAY 00:00:20

On Time 00:01:00

MinTimeOff 00:07:00

Off if Sw1 Off-YES

Off if Sw2 On -NO

SetOvrfeed 00:00:00

Overfeed 03:00:00

Enter new value

Current: 7.95

7.95

v-Cancel ^

Use

the

keyp

ad to

ent

er th

e hi

gh p

Hva

lue

over

whi

ch th

e sa

nitiz

er w

illno

t fee

d.Pr

ess t

he [E

nter]

key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

Hig

h pH

Set

poin

t Scr

een

AK

110

Pro

gram

min

g S

cree

n N

avig

atio

n, O

RP

Mix

Tim

e, R

ev 3

22 A

ug 2

00810.8

63

pH

> 7.67-OFF 7.50s

ORP 490 -OFF 700s

_____

69.0f SW1OFFSW2OFF

Mai

n St

atus

Scr

een

Name:Main Pool

System

>Programming

Service

Data ( 8:441 )

Communications

Security Setup

Wizards

Serial # 123456

Con

figur

atio

n M

enu,

Pro

gram

min

g

AK

110

Pro

gram

min

g S

cree

n N

avig

atio

n, O

RP

Mix

Tim

e (1

of 2

)

Ent

erB

ack

1:pH, Mix Time

>2:ORP, Mix Time

3:Not Used

A:Alarm

P:Pager1

P:Pager2

P:Pager3

P:Pager4

Pro

gram

min

g S

etup

Scr

een

OR

P M

ix, M

anua

l Fee

d T

ime

Ent

erB

ack

OR

P M

ix, P

ropo

rtio

nal F

eed

Per

cent

OR

P M

ix, L

ow O

RP

Set

poin

t

OR

P M

ix, F

eed

Off

if R

elay

is O

n

Enter new value

Current: 00:02:00

00:02:00

v-Cancel ^

Man

ual F

eed

Tim

e S

cree

n

Use

the

keyp

ad to

ent

er th

e m

anua

lsa

nitiz

er fe

ed d

urat

ion.

Pres

s the

[Ent

er] k

ey to

con

firm

or

the

dow

n ar

row

key

to c

ance

l.

Ent

er

Pro

porti

onal

Fee

d P

erce

nt S

cree

n

Use

the

keyp

ad to

ent

er th

epr

opor

tiona

l fee

d pe

rcen

tage

.Pr

ess t

he [E

nter]

key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

Ent

er

Enter new value

Current: 5

5

v-Cancel ^

Enter new value

Current: 700

700

v-Cancel ^

Use

the

keyp

ad to

ent

er th

e O

RP

setp

oint

for s

aniti

zer f

eed

cont

rol.

Pres

s the

[Ent

er] k

ey to

con

firm

or

the

dow

n ar

row

key

to c

ance

l.

Ent

er

Low

OR

P S

etpo

int S

cree

n

Use

the

keyp

ad to

ent

er th

e nu

mbe

rof

the

pH fe

ed co

ntro

l rel

ay to

prev

ent s

imul

taneo

us c

hem

ical

feed

.Pr

ess t

he [E

nter]

key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

Feed

Off

if R

elay

is O

n S

cree

nEnter new value

Current: 1

1

v-Cancel ^

Use

the

keyp

ad to

ent

er th

e tim

ede

lay

betw

een

the s

etpo

int t

rigg

eran

d th

e sa

nitiz

er fe

ed c

ycle

sta

rt.

Pres

s the

[Ent

er] k

ey to

con

firm

or

the

dow

n ar

row

key

to c

ance

l.

Ent

er

Del

ay T

ime

Scr

een

Enter new value

Current: 00:00:20

00:00:20

v-Cancel ^

Ent

er

Ent

er


Proportional% 5

On If ORP< 700

Off If pH> 7.95

Off If pH< 0.00

Off if RLY On 1

On DELAY 00:00:20

On Time 00:01:00

MinTimeOff 00:07:00

Off if Sw1 Off-YES

Off if Sw2 On -NO

SetOvrfeed 00:00:00

Overfeed 03:00:00

ManualTime 00:02:00

Proportional% 5<

On If ORP< 700

Off If pH> 7.95

Off If pH< 0.00

Off if RLY On 1

On DELAY 00:00:20

On Time 00:01:00

MinTimeOff 00:07:00

Off if Sw1 Off-YES

Off if Sw2 On -NO

SetOvrfeed 00:00:00

Overfeed 03:00:00

ManualTime 00:02:00

Proportional% 5

On If ORP< 700<

Off If pH> 7.95

Off If pH< 0.00

Off if RLY On 1

On DELAY 00:00:20

On Time 00:01:00

MinTimeOff 00:07:00

Off if Sw1 Off-YES

Off if Sw2 On -NO

SetOvrfeed 00:00:00

Overfeed 03:00:00

OR

P M

ix, L

ow p

H S

etpo

int

ManualTime 00:02:00

Proportional% 5

On If ORP< 700

Off If pH> 7.95

Off If pH< 0.00<

Off if RLY On 1

On DELAY 00:00:20

On Time 00:01:00

MinTimeOff 00:07:00

Off if Sw1 Off-YES

Off if Sw2 On -NO

SetOvrfeed 00:00:00

Overfeed 03:00:00

ManualTime 00:02:00

Proportional% 5

On If ORP< 700

Off If pH> 7.95

Off If pH< 0.00

Off if RLY On 1<

On DELAY 00:00:20

On Time 00:01:00

MinTimeOff 00:07:00

Off if Sw1 Off-YES

Off if Sw2 On -NO

SetOvrfeed 00:00:00

Overfeed 03:00:00

OR

P M

ix, D

elay

Tim


Proportional% 5

On If ORP< 700

Off If pH> 7.95

Off If pH< 0.00

Off if RLY On 1

On DELAY 00:00:20<

On Time 00:01:00

MinTimeOff 00:07:00

Off if Sw1 Off-YES

Off if Sw2 On -NO

SetOvrfeed 00:00:00

Overfeed 03:00:00

Enter new value

Current: 0.00

0.00

v-Cancel ^

Low

pH

Set

poin

t Scr

een

Use

the

keyp

ad to

ent

er th

e lo

w p

Hva

lue

unde

r whi

ch th

e sa

nitiz

er w

illno

t fee

d.Pr

ess t

he [E

nter]

key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

To

OR

P M

ix T

ime

(2 o

f 2)

Not

e:

The

rela

y 2

prog

ram

min

g m

enu

appe

ars i

n th

is fo

rmat

onl

y w

hen

rela

y 2

has b

een

conf

igur

ed fo

r"O

RP

Mix

Tim

e" c

ontr

ol.

Bac

k

Ent

er

OR

P M

ix, H

igh

pH S

etpo

int

ManualTime 00:02:00

Proportional% 5

On If ORP< 700

Off If pH> 7.95<

Off If pH< 0.00

Off if RLY On 1

On DELAY 00:00:20

On Time 00:01:00

MinTimeOff 00:07:00

Off if Sw1 Off-YES

Off if Sw2 On -NO

SetOvrfeed 00:00:00

Overfeed 03:00:00

Enter new value

Current: 7.95

7.95

v-Cancel ^

Use

the

keyp

ad to

ent

er th

e hi

gh p

Hva

lue

over

whi

ch th

e sa

nitiz

er w

illno

t fee

d.Pr

ess t

he [E

nter]

key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

Hig

h pH

Set

poin

t Scr

een

AK

110

Pro

gram

min

g S

cree

n N

avig

atio

n, O

RP

Mix

Tim

e, R

ev 3

22 A

ug 2

008

64

AK

110

Pro

gram

min

g S

cree

n N

avig

atio

n, O

RP

Mix

Tim

e (2

of 2

)

OR

P M

ix, F

eed

Off

if S

W1

is O

ff

OR

P M

ix, I

ndep

ende

nt o

f SW

2

Ent

er

Ent

er

Set

poin

t Ove

rfee

d S

cree

n

Use

the

keyp

ad to

ent

er th

e da

ilym

axim

um a

ccum

ulat

ed fe

ed ti

me.

Pres

s the

[Ent

er] k

ey to

con

firm

or

the

dow

n ar

row

key

to c

ance

l.

Ove

rfeed

Scr

een

Enter new value

Current: 03:00:00

03:00:00

v-Cancel ^

Ent

er

Ent

er

ManualTime 00:02:00

Proportional% 5

On If ORP< 700

Off If pH> 7.95

Off If pH< 0.00

Off if RLY On 1

On DELAY 00:00:20

On Time 00:01:00

MinTimeOff 00:07:00


Off if Sw2 On –NO

SetOvrfeed 00:00:00

Overfeed 03:00:00

ManualTime 00:02:00

Proportional% 5

On If ORP< 700

Off If pH> 7.95

Off If pH< 0.00

Off if RLY On 1

On DELAY 00:00:20

On Time 00:01:00

MinTimeOff 00:07:00

Off if Sw1 Off-YES

Off if Sw2 On –NO <

SetOvrfeed 00:00:00

Overfeed 03:00:00

OR

P M

ix, S

etpo

int O

verf

eed

ManualTime 00:02:00

Proportional% 5

On If ORP< 700

Off If pH> 7.95

Off If pH< 0.00

Off if RLY On 1

On DELAY 00:00:20

On Time 00:01:00

MinTimeOff 00:07:00

Off if Sw1 Off-YES

Off if Sw2 On -NO


Overfeed 03:00:00

OR

P M

ix, O

verf

eed

ManualTime 00:02:00

Proportional% 5

On If ORP< 700

Off If pH> 7.95

Off If pH< 0.00

Off if RLY On 1

On DELAY 00:00:20

On Time 00:01:00

MinTimeOff 00:07:00

Off if Sw1 Off-YES

Off if Sw2 On -NO

SetOvrfeed 00:00:00

Overfeed 03:00:00<

Fro

m O

RP

Mix

Tim

e (1

of 2

)

OR

P M

ix, I

ndep

ende

nt o

f SW


Proportional% 5

On If ORP< 700

Off If pH> 7.95

Off If pH< 0.00

Off if RLY On 1

On DELAY 00:00:20

On Time 00:01:00

MinTimeOff 00:07:00

Off if Sw1 Off-NO <

Off if Sw2 On –NO

SetOvrfeed 00:00:00

Overfeed 03:00:00

OR

P M

ix, F

eed

Off

if S

W2

is O


Proportional% 5

On If ORP< 700

Off If pH> 7.95

Off If pH< 0.00

Off if RLY On 1

On DELAY 00:00:20

On Time 00:01:00

MinTimeOff 00:07:00

Off if Sw1 Off-YES


SetOvrfeed 00:00:00

Overfeed 03:00:00

Use

the

keyp

ad to

ent

er th

e ru

ntim

eal

low

ed to

reac

h 5%

of s

etpo

int.

Dis

able

s rel

ay if

set

poin

t is

not m

et.

Pres

s the

[Ent

er] k

ey to

con

firm

or

the

dow

n ar

row

key

to c

ance

l.

Enter new value

Current: 00:00:00

00:00:00

v-Cancel ^

Pres

s the

[Ent

er] k

ey to

mak

e th

esa

nitiz

er fe

ed d

epen

dent

or

inde

pend

ent o

f the

sta

tus

of s

witc

h2

(SW

2.)

Pres

s the

[Ent

er] k

ey to

mak

e th

esa

nitiz

er fe

ed d

epen

dent

or

inde

pend

ent o

f the

sta

tus

of th

e flo

wsw

itch

SW1.

Use

the

keyp

ad to

ent

er th

em

axim

um sa

nitiz

er fe

ed d

urat

ion.

Pres

s the

[Ent

er] k

ey to

con

firm

or

the

dow

n ar

row

key

to c

ance

l.

On

Tim

e S

cree

nEnter new value

Current: 00:01:00

00:01:00

v-Cancel ^

Ent

er

OR

P M

ix, O

n T

ime

ManualTime 00:02:00

Proportional% 5

On If ORP< 700

Off If pH> 7.95

Off If pH< 0.00

Off if RLY On 1

On DELAY 00:00:20

On Time 00:01:00<

MinTimeOff 00:07:00

Off if Sw1 Off-YES

Off if Sw2 On -NO

SetOvrfeed 00:00:00

Overfeed 03:00:00

OR

P M

ix, M

inim

um T

ime

Off

Ent

er

ManualTime 00:02:00

Proportional% 5

On If ORP< 700

Off If pH> 7.95

Off If pH< 0.00

Off if RLY On 1

On DELAY 00:00:20

On Time 00:01:00


Off if Sw1 Off-YES

Off if Sw2 On -NO

SetOvrfeed 00:00:00

Overfeed 03:00:00

Use

the

keyp

ad to

ent

er th

e am

ount

of ti

me

the

relay

will

be

held

off

durin

g a

feed

cyc

le to

allo

w m

ixin

g.Pr

ess t

he [E

nter]

key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

Min

imum

Tim

e O

ff S

cree

nEnter new value

Current: 00:07:00

00:07:00

v-Cancel ^

AK

110

Pro

gram

min

g S

cree

n N

avig

atio

n, O

RP

Mix

Tim

e, R

ev 3

22 A

ug 2

008

65

AK

110

Pro

gram

min

g S

cree

n N

avig

atio

n, O

RP

Mix

Tim

e (2

of 2

)

OR

P M

ix, F

eed

Off

if S

W1

is O

ff

OR

P M

ix, I

ndep

ende

nt o

f SW

2

Ent

er

Ent

er

Set

poin

t Ove

rfee

d S

cree

n

Use

the

keyp

ad to

ent

er th

e da

ilym

axim

um a

ccum

ulat

ed fe

ed ti

me.

Pres

s the

[Ent

er] k

ey to

con

firm

or

the

dow

n ar

row

key

to c

ance

l.

Ove

rfeed

Scr

een

Enter new value

Current: 03:00:00

03:00:00

v-Cancel ^

Ent

er

Ent

er

ManualTime 00:02:00

Proportional% 5

On If ORP< 700

Off If pH> 7.95

Off If pH< 0.00

Off if RLY On 1

On DELAY 00:00:20

On Time 00:01:00

MinTimeOff 00:07:00


Off if Sw2 On –NO

SetOvrfeed 00:00:00

Overfeed 03:00:00

ManualTime 00:02:00

Proportional% 5

On If ORP< 700

Off If pH> 7.95

Off If pH< 0.00

Off if RLY On 1

On DELAY 00:00:20

On Time 00:01:00

MinTimeOff 00:07:00

Off if Sw1 Off-YES


SetOvrfeed 00:00:00

Overfeed 03:00:00

OR

P M

ix, S

etpo

int O

verf

eed

ManualTime 00:02:00

Proportional% 5

On If ORP< 700

Off If pH> 7.95

Off If pH< 0.00

Off if RLY On 1

On DELAY 00:00:20

On Time 00:01:00

MinTimeOff 00:07:00

Off if Sw1 Off-YES

Off if Sw2 On -NO


Overfeed 03:00:00

OR

P M

ix, O

verf

eed

ManualTime 00:02:00

Proportional% 5

On If ORP< 700

Off If pH> 7.95

Off If pH< 0.00

Off if RLY On 1

On DELAY 00:00:20

On Time 00:01:00

MinTimeOff 00:07:00

Off if Sw1 Off-YES

Off if Sw2 On -NO

SetOvrfeed 00:00:00

Overfeed 03:00:00<

Fro

m O

RP

Mix

Tim

e (1

of 2

)

OR

P M

ix, I

ndep

ende

nt o

f SW


Proportional% 5

On If ORP< 700

Off If pH> 7.95

Off If pH< 0.00

Off if RLY On 1

On DELAY 00:00:20

On Time 00:01:00

MinTimeOff 00:07:00

Off if Sw1 Off-NO <

Off if Sw2 On –NO

SetOvrfeed 00:00:00

Overfeed 03:00:00

OR

P M

ix, F

eed

Off

if S

W2

is O


Proportional% 5

On If ORP< 700

Off If pH> 7.95

Off If pH< 0.00

Off if RLY On 1

On DELAY 00:00:20

On Time 00:01:00

MinTimeOff 00:07:00

Off if Sw1 Off-YES


SetOvrfeed 00:00:00

Overfeed 03:00:00

Use

the

keyp

ad to

ent

er th

e ru

ntim

eal

low

ed to

reac

h 5%

of s

etpo

int.

Dis

able

s rel

ay if

set

poin

t is

not m

et.

Pres

s the

[Ent

er] k

ey to

con

firm

or

the

dow

n ar

row

key

to c

ance

l.

Enter new value

Current: 00:00:00

00:00:00

v-Cancel ^

Pres

s the

[Ent

er] k

ey to

mak

e th

esa

nitiz

er fe

ed d

epen

dent

or

inde

pend

ent o

f the

sta

tus

of s

witc

h2

(SW

2.)

Pres

s the

[Ent

er] k

ey to

mak

e th

esa

nitiz

er fe

ed d

epen

dent

or

inde

pend

ent o

f the

sta

tus

of th

e flo

wsw

itch

SW1.

Use

the

keyp

ad to

ent

er th

em

axim

um sa

nitiz

er fe

ed d

urat

ion.

Pres

s the

[Ent

er] k

ey to

con

firm

or

the

dow

n ar

row

key

to c

ance

l.

On

Tim

e S

cree

nEnter new value

Current: 00:01:00

00:01:00

v-Cancel ^

Ent

er

OR

P M

ix, O

n T

ime

ManualTime 00:02:00

Proportional% 5

On If ORP< 700

Off If pH> 7.95

Off If pH< 0.00

Off if RLY On 1

On DELAY 00:00:20

On Time 00:01:00<

MinTimeOff 00:07:00

Off if Sw1 Off-YES

Off if Sw2 On -NO

SetOvrfeed 00:00:00

Overfeed 03:00:00

OR

P M

ix, M

inim

um T

ime

Off

Ent

er

ManualTime 00:02:00

Proportional% 5

On If ORP< 700

Off If pH> 7.95

Off If pH< 0.00

Off if RLY On 1

On DELAY 00:00:20

On Time 00:01:00


Off if Sw1 Off-YES

Off if Sw2 On -NO

SetOvrfeed 00:00:00

Overfeed 03:00:00

Use

the

keyp

ad to

ent

er th

e am

ount

of ti

me

the

relay

will

be

held

off

durin

g a

feed

cyc

le to

allo

w m

ixin

g.Pr

ess t

he [E

nter]

key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

Min

imum

Tim

e O

ff S

cree

nEnter new value

Current: 00:07:00

00:07:00

v-Cancel ^

AK

110

Pro

gram

min

g S

cree

n N

avig

atio

n, O

RP

Mix

Tim

e, R

ev 3

22 A

ug 2

008

66

pH

> 7.67-OFF 7.50s

ORP 490 -OFF 700s

_____

69.0f SW1OFFSW2OFF

Mai

n St

atus

Scr

een

Name:Main Pool

System

>Programming

Service

Data ( 8:441 )

Communications

Security Setup

Wizards

Serial # 123456

Con

figur

atio

n M

enu,

Pro

gram

min

g

AK

110

Pro

gram

min

g S

cree

n N

avig

atio

n, O

RP

Cyc

le T

ime

(1 o

f 2)

Ent

erB

ack

1:pH, Cycle Time

>2:ORP, Cycle Time

3:Not Used

A:Alarm

P:Pager1

P:Pager2

P:Pager3

P:Pager4

Pro

gram

min

g S

etup

Scr

een

OR

P C

ycle

, Man

ual F

eed

Tim

e

Ent

erB

ack

OR

P C

ycle

, Pro

port

iona

l Fee

d P

erce

nt

OR

P C

ycle

, Low

OR

P S

etpo

int

OR

P C

ycle

, Fee

d Off

if R

elay

is O

n

Enter new value

Current: 00:02:00

00:02:00

v-Cancel ^

Man

ual F

eed

Tim

e S

cree

n

Use

the

keyp

ad to

ent

er th

e m

anua

lsa

nitiz

er fe

ed d

urat

ion.

Pres

s the

[Ent

er] k

ey to

con

firm

or

the

dow

n ar

row

key

to c

ance

l.

Ent

er

Pro

porti

onal

Fee

d P

erce

nt S

cree

n

Use

the

keyp

ad to

ent

er th

epr

opor

tiona

l fee

d pe

rcen

tage

.Pr

ess t

he [E

nter]

key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

Ent

er

Enter new value

Current: 5

5

v-Cancel ^

Enter new value

Current: 700

700

v-Cancel ^

Use

the

keyp

ad to

ent

er th

e O

RP

setp

oint

for s

aniti

zer f

eed

cont

rol.

Pres

s the

[Ent

er] k

ey to

con

firm

or

the

dow

n ar

row

key

to c

ance

l.

Ent

er

Low

OR

P S

etpo

int S

cree

n

Use

the

keyp

ad to

ent

er th

e nu

mbe

rof

a p

H fe

ed c

ontro

l rel

ay to

pre

vent

sim

ulta

neou

s ch

emic

al fe

ed.

Pres

s the

[Ent

er] k

ey to

con

firm

or

the

dow

n ar

row

key

to c

ance

l.

Feed

Off

if R

elay

is O

n S

cree

nEnter new value

Current: 1

1

v-Cancel ^

Ent

er

Ent

er

OR

P C

ycle

, Low

pH

Set

poin

tEnter new value

Current: 0.00

0.00

v-Cancel ^

Low

pH

Set

poin

t Scr

een

Use

the

keyp

ad to

ent

er th

e lo

w p

Hva

lue

unde

r whi

ch th

e sa

nitiz

er w

illno

t fee

d.Pr

ess t

he [E

nter]

key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.


Proportional% 5

On If ORP< 700

Off If pH> 7.95

Off If pH< 0.00

Off if RLY On 1

Cycle Time 00:02:00

On Limit 00:00:30

Off if Sw1 Off-YES

Off if Sw2 On -NO

SetOvrfeed 00:00:00

Overfeed 03:00:00

ManualTime 00:02:00

Proportional% 5<

On If ORP< 700

Off If pH> 7.95

Off If pH< 0.00

Off if RLY On 1

Cycle Time 00:02:00

On Limit 00:00:30

Off if Sw1 Off-YES

Off if Sw2 On -NO

SetOvrfeed 00:00:00

Overfeed 03:00:00

ManualTime 00:02:00

Proportional% 5

On If ORP< 700<

Off If pH> 7.95

Off If pH< 0.00

Off if RLY On 1

Cycle Time 00:02:00

On Limit 00:00:30

Off if Sw1 Off-YES

Off if Sw2 On -NO

SetOvrfeed 00:00:00

Overfeed 03:00:00

ManualTime 00:02:00

Proportional% 5

On If ORP< 700

Off If pH> 7.95

Off If pH< 0.00<

Off if RLY On 1

Cycle Time 00:02:00

On Limit 00:00:30

Off if Sw1 Off-YES

Off if Sw2 On -NO

SetOvrfeed 00:00:00

Overfeed 03:00:00

ManualTime 00:02:00

Proportional% 5

On If ORP< 700

Off If pH> 7.95

Off If pH< 0.00

Off if RLY On 1<

Cycle Time 00:02:00

On Limit 00:00:30

Off if Sw1 Off-YES

Off if Sw2 On -NO

SetOvrfeed 00:00:00

Overfeed 03:00:00

To

OR

P C

ycle

Tim

e (2

of 2

)

Not

e:

The

rela

y 2

prog

ram

min

g m

enu

appe

ars i

n th

is fo

rmat

onl

y w

hen

rela

y 2

has b

een

conf

igur

ed fo

r"O

RP

Cyc

le T

ime"

con

trol

.

Ent

er

Enter new value

Current: 7.95

7.95

v-Cancel ^

Use

the

keyp

ad to

ent

er th

e hi

gh p

Hva

lue

over

whi

ch th

e sa

nitiz

er w

illno

t fee

d.Pr

ess t

he [E

nter]

key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

Hig

h pH

Set

poin

t Scr

een

ManualTime 00:02:00

Proportional% 5

On If ORP< 700

Off If pH> 7.95<

Off If pH< 0.00

Off if RLY On 1

Cycle Time 00:02:00

On Limit 00:00:30

Off if Sw1 Off-YES

Off if Sw2 On -NO

SetOvrfeed 00:00:00

Overfeed 03:00:00

OR

P C

ycle

, Hig

h pH

Set

poin

t

Bac

k

Ent

er

Enter new value

Current: 7.95

7.95

v-Cancel ^

Use

the

keyp

ad to

ent

er th

e hi

gh p

Hva

lue

over

whi

ch th

e sa

nitiz

er w

illno

t fee

d.Pr

ess t

he [E

nter]

key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

Hig

h pH

Set

poin

t Scr

een

ManualTime 00:02:00

Proportional% 5

On If ORP< 700

Off If pH> 7.95<

Off If pH< 0.00

Off if RLY On 1

Cycle Time 00:02:00

On Limit 00:00:30

Off if Sw1 Off-YES

Off if Sw2 On -NO

SetOvrfeed 00:00:00

Overfeed 03:00:00

OR

P C

ycle

, Hig

h pH

Set

poin

t

AK

110

Pro

gram

min

g S

cree

n N

avig

atio

n, O

RP

Cyc

le T

ime,

Rev

322

Aug

200

810.9

67

pH

> 7.67-OFF 7.50s

ORP 490 -OFF 700s

_____

69.0f SW1OFFSW2OFF

Mai

n St

atus

Scr

een

Name:Main Pool

System

>Programming

Service

Data ( 8:441 )

Communications

Security Setup

Wizards

Serial # 123456

Con

figur

atio

n M

enu,

Pro

gram

min

g

AK

110

Pro

gram

min

g S

cree

n N

avig

atio

n, O

RP

Cyc

le T

ime

(1 o

f 2)

Ent

erB

ack

1:pH, Cycle Time

>2:ORP, Cycle Time

3:Not Used

A:Alarm

P:Pager1

P:Pager2

P:Pager3

P:Pager4

Pro

gram

min

g S

etup

Scr

een

OR

P C

ycle

, Man

ual F

eed

Tim

e

Ent

erB

ack

OR

P C

ycle

, Pro

port

iona

l Fee

d P

erce

nt

OR

P C

ycle

, Low

OR

P S

etpo

int

OR

P C

ycle

, Fee

d Off

if R

elay

is O

n

Enter new value

Current: 00:02:00

00:02:00

v-Cancel ^

Man

ual F

eed

Tim

e S

cree

n

Use

the

keyp

ad to

ent

er th

e m

anua

lsa

nitiz

er fe

ed d

urat

ion.

Pres

s the

[Ent

er] k

ey to

con

firm

or

the

dow

n ar

row

key

to c

ance

l.

Ent

er

Pro

porti

onal

Fee

d P

erce

nt S

cree

n

Use

the

keyp

ad to

ent

er th

epr

opor

tiona

l fee

d pe

rcen

tage

.Pr

ess t

he [E

nter]

key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

Ent

er

Enter new value

Current: 5

5

v-Cancel ^

Enter new value

Current: 700

700

v-Cancel ^

Use

the

keyp

ad to

ent

er th

e O

RP

setp

oint

for s

aniti

zer f

eed

cont

rol.

Pres

s the

[Ent

er] k

ey to

con

firm

or

the

dow

n ar

row

key

to c

ance

l.

Ent

er

Low

OR

P S

etpo

int S

cree

n

Use

the

keyp

ad to

ent

er th

e nu

mbe

rof

a p

H fe

ed c

ontro

l rel

ay to

pre

vent

sim

ulta

neou

s ch

emic

al fe

ed.

Pres

s the

[Ent

er] k

ey to

con

firm

or

the

dow

n ar

row

key

to c

ance

l.

Feed

Off

if R

elay

is O

n S

cree

nEnter new value

Current: 1

1

v-Cancel ^

Ent

er

Ent

er

OR

P C

ycle

, Low

pH

Set

poin

tEnter new value

Current: 0.00

0.00

v-Cancel ^

Low

pH

Set

poin

t Scr

een

Use

the

keyp

ad to

ent

er th

e lo

w p

Hva

lue

unde

r whi

ch th

e sa

nitiz

er w

illno

t fee

d.Pr

ess t

he [E

nter]

key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.


Proportional% 5

On If ORP< 700

Off If pH> 7.95

Off If pH< 0.00

Off if RLY On 1

Cycle Time 00:02:00

On Limit 00:00:30

Off if Sw1 Off-YES

Off if Sw2 On -NO

SetOvrfeed 00:00:00

Overfeed 03:00:00

ManualTime 00:02:00

Proportional% 5<

On If ORP< 700

Off If pH> 7.95

Off If pH< 0.00

Off if RLY On 1

Cycle Time 00:02:00

On Limit 00:00:30

Off if Sw1 Off-YES

Off if Sw2 On -NO

SetOvrfeed 00:00:00

Overfeed 03:00:00

ManualTime 00:02:00

Proportional% 5

On If ORP< 700<

Off If pH> 7.95

Off If pH< 0.00

Off if RLY On 1

Cycle Time 00:02:00

On Limit 00:00:30

Off if Sw1 Off-YES

Off if Sw2 On -NO

SetOvrfeed 00:00:00

Overfeed 03:00:00

ManualTime 00:02:00

Proportional% 5

On If ORP< 700

Off If pH> 7.95

Off If pH< 0.00<

Off if RLY On 1

Cycle Time 00:02:00

On Limit 00:00:30

Off if Sw1 Off-YES

Off if Sw2 On -NO

SetOvrfeed 00:00:00

Overfeed 03:00:00

ManualTime 00:02:00

Proportional% 5

On If ORP< 700

Off If pH> 7.95

Off If pH< 0.00

Off if RLY On 1<

Cycle Time 00:02:00

On Limit 00:00:30

Off if Sw1 Off-YES

Off if Sw2 On -NO

SetOvrfeed 00:00:00

Overfeed 03:00:00

To

OR

P C

ycle

Tim

e (2

of 2

)

Not

e:

The

rela

y 2

prog

ram

min

g m

enu

appe

ars i

n th

is fo

rmat

onl

y w

hen

rela

y 2

has b

een

conf

igur

ed fo

r"O

RP

Cyc

le T

ime"

con

trol

.

Ent

er

Enter new value

Current: 7.95

7.95

v-Cancel ^

Use

the

keyp

ad to

ent

er th

e hi

gh p

Hva

lue

over

whi

ch th

e sa

nitiz

er w

illno

t fee

d.Pr

ess t

he [E

nter]

key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

Hig

h pH

Set

poin

t Scr

een

ManualTime 00:02:00

Proportional% 5

On If ORP< 700

Off If pH> 7.95<

Off If pH< 0.00

Off if RLY On 1

Cycle Time 00:02:00

On Limit 00:00:30

Off if Sw1 Off-YES

Off if Sw2 On -NO

SetOvrfeed 00:00:00

Overfeed 03:00:00

OR

P C

ycle

, Hig

h pH

Set

poin

t

Bac

k

Ent

er

Enter new value

Current: 7.95

7.95

v-Cancel ^

Use

the

keyp

ad to

ent

er th

e hi

gh p

Hva

lue

over

whi

ch th

e sa

nitiz

er w

illno

t fee

d.Pr

ess t

he [E

nter]

key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

Hig

h pH

Set

poin

t Scr

een

ManualTime 00:02:00

Proportional% 5

On If ORP< 700

Off If pH> 7.95<

Off If pH< 0.00

Off if RLY On 1

Cycle Time 00:02:00

On Limit 00:00:30

Off if Sw1 Off-YES

Off if Sw2 On -NO

SetOvrfeed 00:00:00

Overfeed 03:00:00

OR

P C

ycle

, Hig

h pH

Set

poin

t

AK

110

Pro

gram

min

g S

cree

n N

avig

atio

n, O

RP

Cyc

le T

ime,

Rev

322

Aug

200

8

68

AK

110

Pro

gram

min

g S

cree

n N

avig

atio

n, O

RP

Cyc

le T

ime

(2 o

f 2)

Set

poin

t Ove

rfee

d S

cree

n

Use

the

keyp

ad to

ent

er th

e da

ilym

axim

um a

ccum

ulat

ed fe

ed ti

me.

Pres

s the

[Ent

er] k

ey to

con

firm

or

the

dow

n ar

row

key

to c

ance

l.

Ove

rfeed

Scr

een

Enter new value

Current: 03:00:00

03:00:00

v-Cancel ^

Ent

er

Ent

er

OR

P C

ycle

, Set

poin

t Ove

rfee

d

OR

P C

ycle

, Ove

rfee

d

Use

the

keyp

ad to

ent

er th

e ru

ntim

eal

low

ed to

reac

h 5%

of s

etpo

int.

Dis

able

s rel

ay if

set

poin

t is

not m

et.

Pres

s the

[Ent

er] k

ey to

con

firm

or

the

dow

n ar

row

key

to c

ance

l.

Enter new value

Current: 00:00:00

00:00:00

v-Cancel ^

Fro

m O

RP

Cyc

le T

ime

(1 o

f 2)

ManualTime 00:02:00

Proportional% 5

On If ORP< 700

Off If pH> 7.95

Off If pH< 0.00

Off if RLY On 1

Cycle Time 00:02:00

On Limit 00:00:30

Off if Sw1 Off-YES

Off if Sw2 On –NO


Overfeed 03:00:00

ManualTime 00:02:00

Proportional% 5

On If ORP< 700

Off If pH> 7.95

Off If pH< 0.00

Off if RLY On 1

Cycle Time 00:02:00

On Limit 00:00:30

Off if Sw1 Off-YES

Off if Sw2 On –NO

SetOvrfeed 00:00:00

Overfeed 03:00:00<

OR

P C

ycle

, Ind

epen

dent

of S

W2

Ent

er

OR

P C

ycle

, Fee

d O

ff if

SW

2 is

On

Pres

s the

[Ent

er] k

ey to

mak

e th

esa

nitiz

er fe

ed d

epen

dent

or

inde

pend

ent o

f the

sta

tus

of s

witc

h 2

(SW

2.)

ManualTime 00:02:00

Proportional% 5

On If ORP< 700

Off If pH> 7.95

Off If pH< 0.00

Off if RLY On 1

Cycle Time 00:02:00

On Limit 00:00:30

Off if Sw1 Off-YES


SetOvrfeed 00:00:00

Overfeed 03:00:00

ManualTime 00:02:00

Proportional% 5

On If ORP< 700

Off If pH> 7.95

Off If pH< 0.00

Off if RLY On 1

Cycle Time 00:02:00

On Limit 00:00:30

Off if Sw1 Off-YES


SetOvrfeed 00:00:00

Overfeed 03:00:00

OR

P C

ycle

, Fe

ed O

ff if

SW

1 is

Off

Ent

er

OR

P C

ycle

, Ind

epen

dent

of S

W1

Pres

s the

[Ent

er] k

ey to

mak

e th

esa

nitiz

er fe

ed d

epen

dent

or

inde

pend

ent o

f the

sta

tus

of th

e flo

wsw

itch

SW1.

ManualTime 00:02:00

Proportional% 5

On If ORP< 700

Off If pH> 7.95

Off If pH< 0.00

Off if RLY On 1

Cycle Time 00:02:00

On Limit 00:00:30


Off if Sw2 On -NO

SetOvrfeed 00:00:00

Overfeed 03:00:00

ManualTime 00:02:00

Proportional% 5

On If ORP< 700

Off If pH> 7.95

Off If pH< 0.00

Off if RLY On 1

Cycle Time 00:02:00

On Limit 00:00:30

Off if Sw1 Off-NO <

Off if Sw2 On -NO

SetOvrfeed 00:00:00

Overfeed 03:00:00

Use

the

keyp

ad to

ent

er th

e cy

cle

dura

tion,

incl

udin

g bo

th s

aniti

zer

feed

ON

tim

e an

d fe

ed O

FF ti

me.

Pres

s the

[Ent

er] k

ey to

con

firm

or

the

dow

n ar

row

key

to c

ance

l.

Cyc

le T

ime

Scr

een

Enter new value

Current: 00:02:00

00:02:00

v-Cancel ^

Use

the

keyp

ad to

ent

er th

em

axim

um sa

nitiz

er fe

ed d

urat

ion.

Pres

s the

[Ent

er] k

ey to

con

firm

or

the

dow

n ar

row

key

to c

ance

l.

On

Lim

it S

cree

nEnter new value

Current: 00:00:30

00:00:30

v-Cancel ^

Ent

er

Ent

er

OR

P C

ycle

, Cyc

le T

ime

OR

P C

ycle

, On

Lim

it

ManualTime 00:02:00

Proportional% 5

On If ORP< 700

Off If pH> 7.95

Off If pH< 0.00

Off if RLY On 1


On Limit 00:00:30

Off if Sw1 Off-YES

Off if Sw2 On -NO

SetOvrfeed 00:00:00

Overfeed 03:00:00

ManualTime 00:02:00

Proportional% 5

On If ORP< 700

Off If pH> 7.95

Off If pH< 0.00

Off if RLY On 1

Cycle Time 00:02:00

On Limit 00:00:30<

Off if Sw1 Off-YES

Off if Sw2 On -NO

SetOvrfeed 00:00:00

Overfeed 03:00:00

AK

110

Pro

gram

min

g S

cree

n N

avig

atio

n, O

RP

Cyc

le T

ime,

Rev

322

Aug

200

8

69

AK

110

Pro

gram

min

g S

cree

n N

avig

atio

n, O

RP

Cyc

le T

ime

(2 o

f 2)

Set

poin

t Ove

rfee

d S

cree

n

Use

the

keyp

ad to

ent

er th

e da

ilym

axim

um a

ccum

ulat

ed fe

ed ti

me.

Pres

s the

[Ent

er] k

ey to

con

firm

or

the

dow

n ar

row

key

to c

ance

l.

Ove

rfeed

Scr

een

Enter new value

Current: 03:00:00

03:00:00

v-Cancel ^

Ent

er

Ent

er

OR

P C

ycle

, Set

poin

t Ove

rfee

d

OR

P C

ycle

, Ove

rfee

d

Use

the

keyp

ad to

ent

er th

e ru

ntim

eal

low

ed to

reac

h 5%

of s

etpo

int.

Dis

able

s rel

ay if

set

poin

t is

not m

et.

Pres

s the

[Ent

er] k

ey to

con

firm

or

the

dow

n ar

row

key

to c

ance

l.

Enter new value

Current: 00:00:00

00:00:00

v-Cancel ^

Fro

m O

RP

Cyc

le T

ime

(1 o

f 2)

ManualTime 00:02:00

Proportional% 5

On If ORP< 700

Off If pH> 7.95

Off If pH< 0.00

Off if RLY On 1

Cycle Time 00:02:00

On Limit 00:00:30

Off if Sw1 Off-YES

Off if Sw2 On –NO


Overfeed 03:00:00

ManualTime 00:02:00

Proportional% 5

On If ORP< 700

Off If pH> 7.95

Off If pH< 0.00

Off if RLY On 1

Cycle Time 00:02:00

On Limit 00:00:30

Off if Sw1 Off-YES

Off if Sw2 On –NO

SetOvrfeed 00:00:00

Overfeed 03:00:00<

OR

P C

ycle

, Ind

epen

dent

of S

W2

Ent

er

OR

P C

ycle

, Fee

d O

ff if

SW

2 is

On

Pres

s the

[Ent

er] k

ey to

mak

e th

esa

nitiz

er fe

ed d

epen

dent

or

inde

pend

ent o

f the

sta

tus

of s

witc

h 2

(SW

2.)

ManualTime 00:02:00

Proportional% 5

On If ORP< 700

Off If pH> 7.95

Off If pH< 0.00

Off if RLY On 1

Cycle Time 00:02:00

On Limit 00:00:30

Off if Sw1 Off-YES


SetOvrfeed 00:00:00

Overfeed 03:00:00

ManualTime 00:02:00

Proportional% 5

On If ORP< 700

Off If pH> 7.95

Off If pH< 0.00

Off if RLY On 1

Cycle Time 00:02:00

On Limit 00:00:30

Off if Sw1 Off-YES


SetOvrfeed 00:00:00

Overfeed 03:00:00

OR

P C

ycle

, Fe

ed O

ff if

SW

1 is

Off

Ent

er

OR

P C

ycle

, Ind

epen

dent

of S

W1

Pres

s the

[Ent

er] k

ey to

mak

e th

esa

nitiz

er fe

ed d

epen

dent

or

inde

pend

ent o

f the

sta

tus

of th

e flo

wsw

itch

SW1.

ManualTime 00:02:00

Proportional% 5

On If ORP< 700

Off If pH> 7.95

Off If pH< 0.00

Off if RLY On 1

Cycle Time 00:02:00

On Limit 00:00:30


Off if Sw2 On -NO

SetOvrfeed 00:00:00

Overfeed 03:00:00

ManualTime 00:02:00

Proportional% 5

On If ORP< 700

Off If pH> 7.95

Off If pH< 0.00

Off if RLY On 1

Cycle Time 00:02:00

On Limit 00:00:30

Off if Sw1 Off-NO <

Off if Sw2 On -NO

SetOvrfeed 00:00:00

Overfeed 03:00:00

Use

the

keyp

ad to

ent

er th

e cy

cle

dura

tion,

incl

udin

g bo

th s

aniti

zer

feed

ON

tim

e an

d fe

ed O

FF ti

me.

Pres

s the

[Ent

er] k

ey to

con

firm

or

the

dow

n ar

row

key

to c

ance

l.

Cyc

le T

ime

Scr

een

Enter new value

Current: 00:02:00

00:02:00

v-Cancel ^

Use

the

keyp

ad to

ent

er th

em

axim

um sa

nitiz

er fe

ed d

urat

ion.

Pres

s the

[Ent

er] k

ey to

con

firm

or

the

dow

n ar

row

key

to c

ance

l.

On

Lim

it S

cree

nEnter new value

Current: 00:00:30

00:00:30

v-Cancel ^

Ent

er

Ent

er

OR

P C

ycle

, Cyc

le T

ime

OR

P C

ycle

, On

Lim

it

ManualTime 00:02:00

Proportional% 5

On If ORP< 700

Off If pH> 7.95

Off If pH< 0.00

Off if RLY On 1


On Limit 00:00:30

Off if Sw1 Off-YES

Off if Sw2 On -NO

SetOvrfeed 00:00:00

Overfeed 03:00:00

ManualTime 00:02:00

Proportional% 5

On If ORP< 700

Off If pH> 7.95

Off If pH< 0.00

Off if RLY On 1

Cycle Time 00:02:00

On Limit 00:00:30<

Off if Sw1 Off-YES

Off if Sw2 On -NO

SetOvrfeed 00:00:00

Overfeed 03:00:00

AK

110

Pro

gram

min

g S

cree

n N

avig

atio

n, O

RP

Cyc

le T

ime,

Rev

322

Aug

200

8

70

pH

> 7.67-OFF 7.50s

ORP 490 -OFF 700s

_____

69.0f SW1OFFSW2OFF

Mai

n St

atus

Scr

een

Name:Main Pool

System

>Programming

Service

Data ( 8:441 )

Communications

Security Setup

Wizards

Serial # 123456

Con

figur

atio

n M

enu,

Pro

gram

min

g

AK

110

Pro

gram

min

g S

cree

n N

avig

atio

n, O

RP

Cal

Hyp

o (1

of 2

)

Ent

erB

ack

1:pH, Mix Time

>2:ORP, Cal Hypo

3:Not Used

A:Alarm

P:Pager1

P:Pager2

P:Pager3

P:Pager4

Pro

gram

min

g S

etup

Scr

een

OR

P C

al H

ypo,

Man

ual F

eed

Tim

e

Ent

erB

ack

OR

P C

al H

ypo,

Pro

port

iona

l Fee

d P

erce

nt

OR

P C

al H

ypo,

Low

OR

P S

etpo

int

OR

P C

al H

ypo,

Fee

d O

ff if

Rel

ay is

On

Enter new value

Current: 00:02:00

00:02:00

v-Cancel ^

Man

ual F

eed

Tim

e S

cree

n

Use

the

keyp

ad to

ent

er th

e m

anua

lsa

nitiz

er fe

ed d

urat

ion.

Pres

s the

[Ent

er] k

ey to

con

firm

or

the

dow

n ar

row

key

to c

ance

l.

Ent

er

Pro

porti

onal

Fee

d P

erce

nt S

cree

n

Use

the

keyp

ad to

ent

er th

epr

opor

tiona

l fee

d pe

rcen

tage

.Pr

ess t

he [E

nter]

key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

Ent

er

Enter new value

Current: 10

10

v-Cancel ^

Enter new value

Current: 700

700

v-Cancel ^

Use

the

keyp

ad to

ent

er th

e O

RP

setp

oint

for s

aniti

zer f

eed

cont

rol.

Pres

s the

[Ent

er] k

ey to

con

firm

or

the

dow

n ar

row

key

to c

ance

l.

Ent

er

Low

OR

P S

etpo

int S

cree

n

Use

the

keyp

ad to

ent

er th

e nu

mbe

rof

a p

H fe

ed c

ontro

l rel

ay to

pre

vent

sim

ulta

neou

s ch

emic

al fe

ed.

Pres

s the

[Ent

er] k

ey to

con

firm

or

the

dow

n ar

row

key

to c

ance

l.

Ent

er

Feed

Off

if R

elay

is O

n S

cree

nEnter new value

Current: 1

1

v-Cancel ^

Use

the

keyp

ad to

ent

er th

e tim

ede

lay

betw

een

the s

etpo

int t

rigg

eran

d th

e ch

emica

l fee

d cy

cle

star

t.Pr

ess t

he [E

nter]

key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

Ent

er

Del

ay T

ime

Scr

een

Enter new value

Current: 00:00:20

00:00:20

v-Cancel ^

Ent

er

Ent

er

OR

P C

al H

ypo,

Hig

h pH

Set

poin

t

OR

P C

al H

ypo,

Low

pH

Set

poin

t

OR

P C

al H

ypo,

Del

ay T

ime

Enter new value

Current: 7.95

7.95

v-Cancel ^

Use

the

keyp

ad to

ent

er th

e hi

gh p

Hva

lue

over

whi

ch th

e sa

nitiz

er w

illno

t fee

d.Pr

ess t

he [E

nter]

key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

Enter new value

Current: 7.25

7.25

v-Cancel ^

Hig

h pH

Set

poin

t Scr

een

Low

pH

Set

poin

t Scr

een

Use

the

keyp

ad to

ent

er th

e lo

w p

Hva

lue

unde

r whi

ch th

e sa

nitiz

er w

illno

t fee

d.Pr

ess t

he [E

nter]

key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

To

OR

P M

ix T

ime

(2 o

f 2)

Not

e:

The

rela

y 2

prog

ram

min

g m

enu

appe

ars i

n th

is fo

rmat

onl

y w

hen

rela

y 2

has b

een

conf

igur

ed fo

r"O

RP

Cal

Hyp

o" c

ontr

ol.


Proportional% 10

On If ORP< 700

Off If pH> 7.95

Off If pH< 7.25

Off if RLY On 1

On DELAY 00:00:20

OnCTime 00:01:00

MinTimeOff 00:07:00

Off if Sw1 Off-YES

Off if Sw2 On -NO

SetOvrfeed 00:00:00

Overfeed 03:00:00

ManualTime 00:02:00

Proportional% 10

On If ORP< 700<

Off If pH> 7.95

Off If pH< 7.25

Off if RLY On 1

On DELAY 00:00:20

OnCTime 00:01:00

MinTimeOff 00:07:00

Off if Sw1 Off-YES

Off if Sw2 On -NO

SetOvrfeed 00:00:00

Overfeed 03:00:00

ManualTime 00:02:00

Proportional% 10<

On If ORP< 700

Off If pH> 7.95

Off If pH< 7.25

Off if RLY On 1

On DELAY 00:00:20

OnCTime 00:01:00

MinTimeOff 00:07:00

Off if Sw1 Off-YES

Off if Sw2 On -NO

SetOvrfeed 00:00:00

Overfeed 03:00:00

ManualTime 00:02:00

Proportional% 10

On If ORP< 700

Off If pH> 7.95<

Off If pH< 7.25

Off if RLY On 1

On DELAY 00:00:20

OnCTime 00:01:00

MinTimeOff 00:07:00

Off if Sw1 Off-YES

Off if Sw2 On -NO

SetOvrfeed 00:00:00

Overfeed 03:00:00

ManualTime 00:02:00

Proportional% 10

On If ORP< 700

Off If pH> 7.95

Off If pH< 7.25<

Off if RLY On 1

On DELAY 00:00:20

OnCTime 00:01:00

MinTimeOff 00:07:00

Off if Sw1 Off-YES

Off if Sw2 On -NO

SetOvrfeed 00:00:00

Overfeed 03:00:00

ManualTime 00:02:00

Proportional% 10

On If ORP< 700

Off If pH> 7.95

Off If pH< 7.25

Off if RLY On 1<

On DELAY 00:00:20

OnCTime 00:01:00

MinTimeOff 00:07:00

Off if Sw1 Off-YES

Off if Sw2 On -NO

SetOvrfeed 00:00:00

Overfeed 03:00:00

ManualTime 00:02:00

Proportional% 10

On If ORP< 700

Off If pH> 7.95

Off If pH< 7.25

Off if RLY On 1

On DELAY 00:00:20<

OnCTime 00:01:00

MinTimeOff 00:07:00

Off if Sw1 Off-YES

Off if Sw2 On -NO

SetOvrfeed 00:00:00

Overfeed 03:00:00

Bac

k

AK

110

Pro

gram

min

g S

cree

n N

avig

atio

n, O

RP

Cal

Hyp

o, R

ev 3

22 A

ug 2

008

10.10

71

pH

> 7.67-OFF 7.50s

ORP 490 -OFF 700s

_____

69.0f SW1OFFSW2OFF

Mai

n St

atus

Scr

een

Name:Main Pool

System

>Programming

Service

Data ( 8:441 )

Communications

Security Setup

Wizards

Serial # 123456

Con

figur

atio

n M

enu,

Pro

gram

min

g

AK

110

Pro

gram

min

g S

cree

n N

avig

atio

n, O

RP

Cal

Hyp

o (1

of 2

)

Ent

erB

ack

1:pH, Mix Time

>2:ORP, Cal Hypo

3:Not Used

A:Alarm

P:Pager1

P:Pager2

P:Pager3

P:Pager4

Pro

gram

min

g S

etup

Scr

een

OR

P C

al H

ypo,

Man

ual F

eed

Tim

e

Ent

erB

ack

OR

P C

al H

ypo,

Pro

port

iona

l Fee

d P

erce

nt

OR

P C

al H

ypo,

Low

OR

P S

etpo

int

OR

P C

al H

ypo,

Fee

d O

ff if

Rel

ay is

On

Enter new value

Current: 00:02:00

00:02:00

v-Cancel ^

Man

ual F

eed

Tim

e S

cree

n

Use

the

keyp

ad to

ent

er th

e m

anua

lsa

nitiz

er fe

ed d

urat

ion.

Pres

s the

[Ent

er] k

ey to

con

firm

or

the

dow

n ar

row

key

to c

ance

l.

Ent

er

Pro

porti

onal

Fee

d P

erce

nt S

cree

n

Use

the

keyp

ad to

ent

er th

epr

opor

tiona

l fee

d pe

rcen

tage

.Pr

ess t

he [E

nter]

key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

Ent

er

Enter new value

Current: 10

10

v-Cancel ^

Enter new value

Current: 700

700

v-Cancel ^

Use

the

keyp

ad to

ent

er th

e O

RP

setp

oint

for s

aniti

zer f

eed

cont

rol.

Pres

s the

[Ent

er] k

ey to

con

firm

or

the

dow

n ar

row

key

to c

ance

l.

Ent

er

Low

OR

P S

etpo

int S

cree

n

Use

the

keyp

ad to

ent

er th

e nu

mbe

rof

a p

H fe

ed c

ontro

l rel

ay to

pre

vent

sim

ulta

neou

s ch

emic

al fe

ed.

Pres

s the

[Ent

er] k

ey to

con

firm

or

the

dow

n ar

row

key

to c

ance

l.

Ent

er

Feed

Off

if R

elay

is O

n S

cree

nEnter new value

Current: 1

1

v-Cancel ^

Use

the

keyp

ad to

ent

er th

e tim

ede

lay

betw

een

the s

etpo

int t

rigg

eran

d th

e ch

emica

l fee

d cy

cle

star

t.Pr

ess t

he [E

nter]

key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

Ent

er

Del

ay T

ime

Scr

een

Enter new value

Current: 00:00:20

00:00:20

v-Cancel ^

Ent

er

Ent

er

OR

P C

al H

ypo,

Hig

h pH

Set

poin

t

OR

P C

al H

ypo,

Low

pH

Set

poin

t

OR

P C

al H

ypo,

Del

ay T

ime

Enter new value

Current: 7.95

7.95

v-Cancel ^

Use

the

keyp

ad to

ent

er th

e hi

gh p

Hva

lue

over

whi

ch th

e sa

nitiz

er w

illno

t fee

d.Pr

ess t

he [E

nter]

key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

Enter new value

Current: 7.25

7.25

v-Cancel ^

Hig

h pH

Set

poin

t Scr

een

Low

pH

Set

poin

t Scr

een

Use

the

keyp

ad to

ent

er th

e lo

w p

Hva

lue

unde

r whi

ch th

e sa

nitiz

er w

illno

t fee

d.Pr

ess t

he [E

nter]

key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

To

OR

P M

ix T

ime

(2 o

f 2)

Not

e:

The

rela

y 2

prog

ram

min

g m

enu

appe

ars i

n th

is fo

rmat

onl

y w

hen

rela

y 2

has b

een

conf

igur

ed fo

r"O

RP

Cal

Hyp

o" c

ontr

ol.


Proportional% 10

On If ORP< 700

Off If pH> 7.95

Off If pH< 7.25

Off if RLY On 1

On DELAY 00:00:20

OnCTime 00:01:00

MinTimeOff 00:07:00

Off if Sw1 Off-YES

Off if Sw2 On -NO

SetOvrfeed 00:00:00

Overfeed 03:00:00

ManualTime 00:02:00

Proportional% 10

On If ORP< 700<

Off If pH> 7.95

Off If pH< 7.25

Off if RLY On 1

On DELAY 00:00:20

OnCTime 00:01:00

MinTimeOff 00:07:00

Off if Sw1 Off-YES

Off if Sw2 On -NO

SetOvrfeed 00:00:00

Overfeed 03:00:00

ManualTime 00:02:00

Proportional% 10<

On If ORP< 700

Off If pH> 7.95

Off If pH< 7.25

Off if RLY On 1

On DELAY 00:00:20

OnCTime 00:01:00

MinTimeOff 00:07:00

Off if Sw1 Off-YES

Off if Sw2 On -NO

SetOvrfeed 00:00:00

Overfeed 03:00:00

ManualTime 00:02:00

Proportional% 10

On If ORP< 700

Off If pH> 7.95<

Off If pH< 7.25

Off if RLY On 1

On DELAY 00:00:20

OnCTime 00:01:00

MinTimeOff 00:07:00

Off if Sw1 Off-YES

Off if Sw2 On -NO

SetOvrfeed 00:00:00

Overfeed 03:00:00

ManualTime 00:02:00

Proportional% 10

On If ORP< 700

Off If pH> 7.95

Off If pH< 7.25<

Off if RLY On 1

On DELAY 00:00:20

OnCTime 00:01:00

MinTimeOff 00:07:00

Off if Sw1 Off-YES

Off if Sw2 On -NO

SetOvrfeed 00:00:00

Overfeed 03:00:00

ManualTime 00:02:00

Proportional% 10

On If ORP< 700

Off If pH> 7.95

Off If pH< 7.25

Off if RLY On 1<

On DELAY 00:00:20

OnCTime 00:01:00

MinTimeOff 00:07:00

Off if Sw1 Off-YES

Off if Sw2 On -NO

SetOvrfeed 00:00:00

Overfeed 03:00:00

ManualTime 00:02:00

Proportional% 10

On If ORP< 700

Off If pH> 7.95

Off If pH< 7.25

Off if RLY On 1

On DELAY 00:00:20<

OnCTime 00:01:00

MinTimeOff 00:07:00

Off if Sw1 Off-YES

Off if Sw2 On -NO

SetOvrfeed 00:00:00

Overfeed 03:00:00

Bac

k

AK

110

Pro

gram

min

g S

cree

n N

avig

atio

n, O

RP

Cal

Hyp

o, R

ev 3

22 A

ug 2

008

72

AK

110

Pro

gram

min

g S

cree

n N

avig

atio

n, O

RP

Cal

Hyp

o (2

of 2

)

OR

P C

al H

ypo,

Fee

d O

ff if

SW

1 is

Off

OR

P C

al H

ypo,

Inde

pend

ent o

f SW

2Ent

er

Ent

er

Set

poin

t Ove

rfee

d S

cree

n

Use

the

keyp

ad to

ent

er th

e da

ilym

axim

um a

ccum

ulat

ed fe

ed ti

me.

Pres

s the

[Ent

er] k

ey to

con

firm

or

the

dow

n ar

row

key

to c

ance

l.

Ove

rfeed

Scr

een

Enter new value

Current: 03:00:00

03:00:00

v-Cancel ^

Ent

er

Ent

er

OR

P C

al H

ypo,

Set

poin

t Ove

rfee

d

OR

P C

al H

ypo,

Ove

rfee

d

OR

P C

al H

ypo,

Inde

pend

ent o

f SW

1

OR

P C

al H

ypo,

Fee

d Of

f if S

W2

is O

n

Use

the

keyp

ad to

ent

er th

e ru

ntim

eal

low

ed to

reac

h 5%

of s

etpo

int.

Dis

able

s rel

ay if

set

poin

t is

not m

et.

Pres

s the

[Ent

er] k

ey to

con

firm

or

the

dow

n ar

row

key

to c

ance

l.

Enter new value

Current: 00:00:00

00:00:00

v-Cancel ^

Pres

s the

[Ent

er] k

ey to

mak

e th

esa

nitiz

er fe

ed d

epen

dent

or

inde

pend

ent o

f the

sta

tus

of s

witc

h 2

(SW

2.)

Pres

s the

[Ent

er] k

ey to

mak

e th

esa

nitiz

er fe

ed d

epen

dent

or

inde

pend

ent o

f the

sta

tus

of th

e flo

wsw

itch

SW1.

Fro

m O

RP

Cal

Hyp

o (1

of 2

)

ManualTime 00:02:00

Proportional% 10

On If ORP< 700

Off If pH> 7.95

Off If pH< 7.25

Off if RLY On 1

On DELAY 00:00:20

OnCTime 00:01:00

MinTimeOff 00:07:00

Off if Sw1 Off-YES

Off if Sw2 On -NO

SetOvrfeed 00:00:00

Overfeed 03:00:00<

ManualTime 00:02:00

Proportional% 10

On If ORP< 700

Off If pH> 7.95

Off If pH< 7.25

Off if RLY On 1

On DELAY 00:00:20

OnCTime 00:01:00

MinTimeOff 00:07:00

Off if Sw1 Off-YES

Off if Sw2 On -NO


Overfeed 03:00:00

ManualTime 00:02:00

Proportional% 10

On If ORP< 700

Off If pH> 7.95

Off If pH< 7.25

Off if RLY On 1

On DELAY 00:00:20

OnCTime 00:01:00

MinTimeOff 00:07:00

Off if Sw1 Off-YES


SetOvrfeed 00:00:00

Overfeed 03:00:00

ManualTime 00:02:00

Proportional% 10

On If ORP< 700

Off If pH> 7.95

Off If pH< 7.25

Off if RLY On 1

On DELAY 00:00:20

OnCTime 00:01:00

MinTimeOff 00:07:00


Off if Sw2 On –NO

SetOvrfeed 00:00:00

Overfeed 03:00:00

ManualTime 00:02:00

Proportional% 10

On If ORP< 700

Off If pH> 7.95

Off If pH< 7.25

Off if RLY On 1

On DELAY 00:00:20

OnCTime 00:01:00

MinTimeOff 00:07:00

Off if Sw1 Off-YES


SetOvrfeed 00:00:00

Overfeed 03:00:00

ManualTime 00:02:00

Proportional% 10

On If ORP< 700

Off If pH> 7.95

Off If pH< 7.25

Off if RLY On 1

On DELAY 00:00:20

OnCTime 00:01:00

MinTimeOff 00:07:00

Off if Sw1 Off-NO <

Off if Sw2 On –NO

SetOvrfeed 00:00:00

Overfeed 03:00:00

Use

the

keyp

ad to

ent

er th

em

axim

um sa

nitiz

er fe

ed d

urat

ion.

Pres

s the

[Ent

er] k

ey to

con

firm

or

the

dow

n ar

row

key

to c

ance

l.

On

Cal

cula

ted

Tim

e S

cree

nEnter new value

Current: 00:01:00

00:01:00

v-Cancel ^

Ent

er

OR

P C

al H

ypo,

On

Cal

cula

ted

Tim


Proportional% 10

On If ORP< 700

Off If pH> 7.95

Off If pH< 7.25

Off if RLY On 1

On DELAY 00:00:20

OnCTime 00:01:00<

MinTimeOff 00:07:00

Off if Sw1 Off-YES

Off if Sw2 On -NO

SetOvrfeed 00:00:00

Overfeed 03:00:00

OR

P C

al H

ypo,

Min

imum

Tim

e O

ff

Ent

er

Use

the

keyp

ad to

ent

er th

e am

ount

of ti

me

the

relay

will

be

held

off

durin

g a

feed

cyc

le to

allo

w m

ixin

g.Pr

ess t

he [E

nter]

key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

Min

imum

Tim

e O

ff S

cree

nEnter new value

Current: 00:07:00

00:07:00

v-Cancel ^

ManualTime 00:02:00

Proportional% 10

On If ORP< 700

Off If pH> 7.95

Off If pH< 7.25

Off if RLY On 1

On DELAY 00:00:20

OnCTime 00:01:00


Off if Sw1 Off-YES

Off if Sw2 On –NO

SetOvrfeed 00:00:00

Overfeed 03:00:00

AK

110

Pro

gram

min

g S

cree

n N

avig

atio

n, O

RP

Cal

Hyp

o, R

ev 3

22 A

ug 2

008

73

AK

110

Pro

gram

min

g S

cree

n N

avig

atio

n, O

RP

Cal

Hyp

o (2

of 2

)

OR

P C

al H

ypo,

Fee

d O

ff if

SW

1 is

Off

OR

P C

al H

ypo,

Inde

pend

ent o

f SW

2Ent

er

Ent

er

Set

poin

t Ove

rfee

d S

cree

n

Use

the

keyp

ad to

ent

er th

e da

ilym

axim

um a

ccum

ulat

ed fe

ed ti

me.

Pres

s the

[Ent

er] k

ey to

con

firm

or

the

dow

n ar

row

key

to c

ance

l.

Ove

rfeed

Scr

een

Enter new value

Current: 03:00:00

03:00:00

v-Cancel ^

Ent

er

Ent

er

OR

P C

al H

ypo,

Set

poin

t Ove

rfee

d

OR

P C

al H

ypo,

Ove

rfee

d

OR

P C

al H

ypo,

Inde

pend

ent o

f SW

1

OR

P C

al H

ypo,

Fee

d Of

f if S

W2

is O

n

Use

the

keyp

ad to

ent

er th

e ru

ntim

eal

low

ed to

reac

h 5%

of s

etpo

int.

Dis

able

s rel

ay if

set

poin

t is

not m

et.

Pres

s the

[Ent

er] k

ey to

con

firm

or

the

dow

n ar

row

key

to c

ance

l.

Enter new value

Current: 00:00:00

00:00:00

v-Cancel ^

Pres

s the

[Ent

er] k

ey to

mak

e th

esa

nitiz

er fe

ed d

epen

dent

or

inde

pend

ent o

f the

sta

tus

of s

witc

h 2

(SW

2.)

Pres

s the

[Ent

er] k

ey to

mak

e th

esa

nitiz

er fe

ed d

epen

dent

or

inde

pend

ent o

f the

sta

tus

of th

e flo

wsw

itch

SW1.

Fro

m O

RP

Cal

Hyp

o (1

of 2

)

ManualTime 00:02:00

Proportional% 10

On If ORP< 700

Off If pH> 7.95

Off If pH< 7.25

Off if RLY On 1

On DELAY 00:00:20

OnCTime 00:01:00

MinTimeOff 00:07:00

Off if Sw1 Off-YES

Off if Sw2 On -NO

SetOvrfeed 00:00:00

Overfeed 03:00:00<

ManualTime 00:02:00

Proportional% 10

On If ORP< 700

Off If pH> 7.95

Off If pH< 7.25

Off if RLY On 1

On DELAY 00:00:20

OnCTime 00:01:00

MinTimeOff 00:07:00

Off if Sw1 Off-YES

Off if Sw2 On -NO


Overfeed 03:00:00

ManualTime 00:02:00

Proportional% 10

On If ORP< 700

Off If pH> 7.95

Off If pH< 7.25

Off if RLY On 1

On DELAY 00:00:20

OnCTime 00:01:00

MinTimeOff 00:07:00

Off if Sw1 Off-YES


SetOvrfeed 00:00:00

Overfeed 03:00:00

ManualTime 00:02:00

Proportional% 10

On If ORP< 700

Off If pH> 7.95

Off If pH< 7.25

Off if RLY On 1

On DELAY 00:00:20

OnCTime 00:01:00

MinTimeOff 00:07:00


Off if Sw2 On –NO

SetOvrfeed 00:00:00

Overfeed 03:00:00

ManualTime 00:02:00

Proportional% 10

On If ORP< 700

Off If pH> 7.95

Off If pH< 7.25

Off if RLY On 1

On DELAY 00:00:20

OnCTime 00:01:00

MinTimeOff 00:07:00

Off if Sw1 Off-YES


SetOvrfeed 00:00:00

Overfeed 03:00:00

ManualTime 00:02:00

Proportional% 10

On If ORP< 700

Off If pH> 7.95

Off If pH< 7.25

Off if RLY On 1

On DELAY 00:00:20

OnCTime 00:01:00

MinTimeOff 00:07:00

Off if Sw1 Off-NO <

Off if Sw2 On –NO

SetOvrfeed 00:00:00

Overfeed 03:00:00

Use

the

keyp

ad to

ent

er th

em

axim

um sa

nitiz

er fe

ed d

urat

ion.

Pres

s the

[Ent

er] k

ey to

con

firm

or

the

dow

n ar

row

key

to c

ance

l.

On

Cal

cula

ted

Tim

e S

cree

nEnter new value

Current: 00:01:00

00:01:00

v-Cancel ^

Ent

er

OR

P C

al H

ypo,

On

Cal

cula

ted

Tim


Proportional% 10

On If ORP< 700

Off If pH> 7.95

Off If pH< 7.25

Off if RLY On 1

On DELAY 00:00:20

OnCTime 00:01:00<

MinTimeOff 00:07:00

Off if Sw1 Off-YES

Off if Sw2 On -NO

SetOvrfeed 00:00:00

Overfeed 03:00:00

OR

P C

al H

ypo,

Min

imum

Tim

e O

ff

Ent

er

Use

the

keyp

ad to

ent

er th

e am

ount

of ti

me

the

relay

will

be

held

off

durin

g a

feed

cyc

le to

allo

w m

ixin

g.Pr

ess t

he [E

nter]

key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

Min

imum

Tim

e O

ff S

cree

nEnter new value

Current: 00:07:00

00:07:00

v-Cancel ^

ManualTime 00:02:00

Proportional% 10

On If ORP< 700

Off If pH> 7.95

Off If pH< 7.25

Off if RLY On 1

On DELAY 00:00:20

OnCTime 00:01:00


Off if Sw1 Off-YES

Off if Sw2 On –NO

SetOvrfeed 00:00:00

Overfeed 03:00:00

AK

110

Pro

gram

min

g S

cree

n N

avig

atio

n, O

RP

Cal

Hyp

o, R

ev 3

22 A

ug 2

008

74

10.11

pH

> 7.67-OFF 7.50s

ORP 490 -OFF 700s

PPM, Cycle-OFF

69.0f SW1OFFSW2OFF

Mai

n St

atus

Scr

een

Name:Main Pool

System

>Programming

Service

Data ( 8:441 )

Communications

Security Setup

Wizards

Serial # 123456

Con

figur

atio

n M

enu,

Pro

gram

min

g

AK

110

Pro

gram

min

g S

cree

n N

avig

atio

n, P

PM

Cyc

le T

ime

(1 o

f 2)

Ent

erB

ack

1:pH, Cycle Time

2:ORP, Cycle Time

>3:PPM, Cycle Time

A:Alarm

P:Pager1

P:Pager2

P:Pager3

P:Pager4

Pro

gram

min

g S

etup

Scr

een

PP

M C

ycle

, Man

ual F

eed

Tim

e

Ent

erB

ack

PP

M C

ycle

, Pro

port

iona

l Fee

d P

erce

nt

PP

M C

ycle

, Low

PP

M S

etpo

int

PP

M C

ycle

, Fee

d Off

if R

elay

is O

n

Enter new value

Current: 00:02:00

00:02:00

v-Cancel ^

Man

ual F

eed

Tim

e S

cree

n

Use

the

keyp

ad to

ent

er th

e m

anua

lsa

nitiz

er fe

ed d

urat

ion.

Pres

s the

[Ent

er] k

ey to

con

firm

or

the

dow

n ar

row

key

to c

ance

l.

Ent

er

Pro

porti

onal

Fee

d P

erce

nt S

cree

n

Use

the

keyp

ad to

ent

er th

epr

opor

tiona

l fee

d pe

rcen

tage

.Pr

ess t

he [E

nter]

key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

Ent

er

Enter new value

Current: 10

10

v-Cancel ^

Enter new value

Current: 2.00

2.00

v-Cancel ^

Use

the

keyp

ad to

ent

er th

e lo

wPP

M v

alue

und

er w

hich

the

sani

tizer

will

feed

.Pr

ess t

he [E

nter]

key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

Ent

er

Low

PP

M S

etpo

int S

cree

n

Use

the

keyp

ad to

ent

er th

e nu

mbe

rof

a p

H fe

ed c

ontro

l rel

ay to

pre

vent

sim

ulta

neou

s ch

emic

al fe

ed.

Pres

s the

[Ent

er] k

ey to

con

firm

or

the

dow

n ar

row

key

to c

ance

l.

Ent

er

Feed

Off

if R

elay

is O

n S

cree

nEnter new value

Current: 1

1

v-Cancel ^

Ent

er

Cyc

le T

ime

Scr

een

Enter new value

Current: 00:02:00

00:02:00

v-Cancel ^

Ent

er

Ent

er

PP

M C

ycle

, Hig

h pH

Set

poin

t

PP

M C

ycle

, Low

pH

Set

poin

t

PP

M C

ycle

, Cyc

le T

ime

Enter new value

Current: 7.95

7.95

v-Cancel ^

Use

the

keyp

ad to

ent

er th

e hi

gh p

Hva

lue

over

whi

ch th

e sa

nitiz

er w

illno

t fee

d.Pr

ess t

he [E

nter]

key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

Enter new value

Current: 0.00

0.00

v-Cancel ^

Hig

h pH

Set

poin

t Scr

een

Low

pH

Set

poin

t Scr

een

Use

the

keyp

ad to

ent

er th

e lo

w p

Hva

lue

unde

r whi

ch th

e sa

nitiz

er w

illno

t fee

d.Pr

ess t

he [E

nter]

key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

Not

e:

The

rela

y 3

prog

ram

min

g m

enu

appe

ars i

n th

is fo

rmat

onl

y w

hen

rela

y 3

has b

een

conf

igur

ed fo

r"P

PM C

ycle

Tim

e" c

ontr

ol.

To

PPM

Cyc

le T

ime

(2 o

f 2)


Proportional% 10

On If PPM< 2.00

Off If pH> 7.95

Off If pH< 0.00

Off if RLY On 1

Cycle Time 00:02:00

On Limit 00:00:30

Off if Sw1 Off-YES

Off if Sw2 On -NO

SetOvrfeed 00:00:00

Overfeed 03:00:00

ManualTime 00:02:00

Proportional% 10<

On If PPM< 2.00

Off If pH> 7.95

Off if RLY On 1

Cycle Time 00:02:00

On Limit 00:00:30

Off if Sw1 Off-YES

Off if Sw2 On -NO

SetOvrfeed 00:00:00

Overfeed 03:00:00

ManualTime 00:02:00

Proportional% 10

On If PPM< 2.00<

Off If pH> 7.95

Off If pH< 0.00

Off if RLY On 1

Cycle Time 00:02:00

On Limit 00:00:30

Off if Sw1 Off-YES

Off if Sw2 On -NO

SetOvrfeed 00:00:00

Overfeed 03:00:00

ManualTime 00:02:00

Proportional% 10

On If PPM< 2.00

Off If pH> 7.95<

Off If pH< 0.00

Off if RLY On 1

Cycle Time 00:02:00

On Limit 00:00:30

Off if Sw1 Off-YES

Off if Sw2 On -NO

SetOvrfeed 00:00:00

Overfeed 03:00:00

ManualTime 00:02:00

Proportional% 10

On If PPM< 2.00

Off If pH> 7.95

Off If pH< 0.00<

Off if RLY On 1

Cycle Time 00:02:00

On Limit 00:00:30

Off if Sw1 Off-YES

Off if Sw2 On -NO

SetOvrfeed 00:00:00

Overfeed 03:00:00

ManualTime 00:02:00

Proportional% 10

On If PPM< 2.00

Off If pH> 7.95

Off If pH< 0.00

Off if RLY On 1<

Cycle Time 00:02:00

On Limit 00:00:30

Off if Sw1 Off-YES

Off if Sw2 On -NO

SetOvrfeed 00:00:00

Overfeed 03:00:00

ManualTime 00:02:00

Proportional% 10

On If PPM< 2.00

Off If pH> 7.95

Off If pH< 0.00

Off if RLY On 1


On Limit 00:00:30

Off if Sw1 Off-YES

Off if Sw2 On -NO

SetOvrfeed 00:00:00

Overfeed 03:00:00

Use

the

keyp

ad to

ent

er th

e cy

cle

dura

tion,

incl

udin

g bo

th s

aniti

zer

feed

ON

tim

e an

d fe

ed O

FF ti

me.

Pres

s the

[Ent

er] k

ey to

con

firm

or

the

dow

n ar

row

key

to c

ance

l.

Bac

k

PP

M C

ycle

, Fee

d O

ff if

SW

1 is

Off

Ent

er

PP

M C

ycle

, Ind

epen

dent

of S

W1

Pres

s the

[Ent

er] k

ey to

mak

e th

esa

nitiz

er fe

ed d

epen

dent

or

inde

pend

ent o

f the

sta

tus

of th

e flo

wsw

itch

SW1.

On

Lim

it S

cree

nEnter new value

Current: 00:00:30

00:00:30

v-Cancel ^

Ent

er

PP

M C

ycle

, On

Lim

itManualTime 00:02:00

Proportional% 10

On If PPM< 2.00

Off If pH> 7.95

Off If pH< 0.00

Off if RLY On 1

Cycle Time 00:02:00

On Limit 00:00:30<

Off if Sw1 Off-YES

Off if Sw2 On -NO

SetOvrfeed 00:00:00

Overfeed 03:00:00

ManualTime 00:02:00

Proportional% 10

On If PPM< 2.00

Off If pH> 7.95

Off If pH< 0.00

Off if RLY On 1

Cycle Time 00:02:00

On Limit 00:00:30


Off if Sw2 On -NO

SetOvrfeed 00:00:00

Overfeed 03:00:00

ManualTime 00:02:00

Proportional% 10

On If PPM< 2.00

Off If pH> 7.95

Off If pH< 0.00

Off if RLY On 1

Cycle Time 00:02:00

On Limit 00:00:30

Off if Sw1 Off-NO <

Off if Sw2 On -NO

SetOvrfeed 00:00:00

Overfeed 03:00:00

Use

the

keyp

ad to

ent

er th

em

axim

um sa

nitiz

er fe

ed d

urat

ion.

Pres

s the

[Ent

er] k

ey to

con

firm

or

the

dow

n ar

row

key

to c

ance

l.

PP

M C

ycle

, Ind

epen

dent

of S

W2

Ent

er

PP

M C

ycle

, Fee

d O

ff if

SW

2 is

On

Pres

s the

[Ent

er] k

ey to

mak

e th

esa

nitiz

er fe

ed d

epen

dent

or

inde

pend

ent o

f the

sta

tus

of s

witc

h 2

(SW

2.)

ManualTime 00:02:00

Proportional% 10

On If PPM< 2.00

Off If pH> 7.95

Off If pH< 0.00

Off if RLY On 1

Cycle Time 00:02:00

On Limit 00:00:30

Off if Sw1 Off-YES


SetOvrfeed 00:00:00

Overfeed 03:00:00


Proportional% 10

On If PPM< 2.00

Off If pH> 7.95

Off If pH< 0.00

Off if RLY On 1

Cycle Time 00:02:00

On Limit 00:00:30

Off if Sw1 Off-YES


SetOvrfeed 00:00:00

Overfeed 03:00:00

AK

110

Pro

gram

min

g S

cree

n N

avig

atio

n, P

PM

Cyc

le T

ime,

Rev

322

Aug

200

8

75

pH

> 7.67-OFF 7.50s

ORP 490 -OFF 700s

PPM, Cycle-OFF

69.0f SW1OFFSW2OFF

Mai

n St

atus

Scr

een

Name:Main Pool

System

>Programming

Service

Data ( 8:441 )

Communications

Security Setup

Wizards

Serial # 123456

Con

figur

atio

n M

enu,

Pro

gram

min

g

AK

110

Pro

gram

min

g S

cree

n N

avig

atio

n, P

PM

Cyc

le T

ime

(1 o

f 2)

Ent

erB

ack

1:pH, Cycle Time

2:ORP, Cycle Time

>3:PPM, Cycle Time

A:Alarm

P:Pager1

P:Pager2

P:Pager3

P:Pager4

Pro

gram

min

g S

etup

Scr

een

PP

M C

ycle

, Man

ual F

eed

Tim

e

Ent

erB

ack

PP

M C

ycle

, Pro

port

iona

l Fee

d P

erce

nt

PP

M C

ycle

, Low

PP

M S

etpo

int

PP

M C

ycle

, Fee

d Off

if R

elay

is O

n

Enter new value

Current: 00:02:00

00:02:00

v-Cancel ^

Man

ual F

eed

Tim

e S

cree

n

Use

the

keyp

ad to

ent

er th

e m

anua

lsa

nitiz

er fe

ed d

urat

ion.

Pres

s the

[Ent

er] k

ey to

con

firm

or

the

dow

n ar

row

key

to c

ance

l.

Ent

er

Pro

porti

onal

Fee

d P

erce

nt S

cree

n

Use

the

keyp

ad to

ent

er th

epr

opor

tiona

l fee

d pe

rcen

tage

.Pr

ess t

he [E

nter]

key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

Ent

er

Enter new value

Current: 10

10

v-Cancel ^

Enter new value

Current: 2.00

2.00

v-Cancel ^

Use

the

keyp

ad to

ent

er th

e lo

wPP

M v

alue

und

er w

hich

the

sani

tizer

will

feed

.Pr

ess t

he [E

nter]

key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

Ent

er

Low

PP

M S

etpo

int S

cree

n

Use

the

keyp

ad to

ent

er th

e nu

mbe

rof

a p

H fe

ed c

ontro

l rel

ay to

pre

vent

sim

ulta

neou

s ch

emic

al fe

ed.

Pres

s the

[Ent

er] k

ey to

con

firm

or

the

dow

n ar

row

key

to c

ance

l.

Ent

er

Feed

Off

if R

elay

is O

n S

cree

nEnter new value

Current: 1

1

v-Cancel ^

Ent

er

Cyc

le T

ime

Scr

een

Enter new value

Current: 00:02:00

00:02:00

v-Cancel ^

Ent

er

Ent

er

PP

M C

ycle

, Hig

h pH

Set

poin

t

PP

M C

ycle

, Low

pH

Set

poin

t

PP

M C

ycle

, Cyc

le T

ime

Enter new value

Current: 7.95

7.95

v-Cancel ^

Use

the

keyp

ad to

ent

er th

e hi

gh p

Hva

lue

over

whi

ch th

e sa

nitiz

er w

illno

t fee

d.Pr

ess t

he [E

nter]

key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

Enter new value

Current: 0.00

0.00

v-Cancel ^

Hig

h pH

Set

poin

t Scr

een

Low

pH

Set

poin

t Scr

een

Use

the

keyp

ad to

ent

er th

e lo

w p

Hva

lue

unde

r whi

ch th

e sa

nitiz

er w

illno

t fee

d.Pr

ess t

he [E

nter]

key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

Not

e:

The

rela

y 3

prog

ram

min

g m

enu

appe

ars i

n th

is fo

rmat

onl

y w

hen

rela

y 3

has b

een

conf

igur

ed fo

r"P

PM C

ycle

Tim

e" c

ontr

ol.

To

PPM

Cyc

le T

ime

(2 o

f 2)


Proportional% 10

On If PPM< 2.00

Off If pH> 7.95

Off If pH< 0.00

Off if RLY On 1

Cycle Time 00:02:00

On Limit 00:00:30

Off if Sw1 Off-YES

Off if Sw2 On -NO

SetOvrfeed 00:00:00

Overfeed 03:00:00

ManualTime 00:02:00

Proportional% 10<

On If PPM< 2.00

Off If pH> 7.95

Off if RLY On 1

Cycle Time 00:02:00

On Limit 00:00:30

Off if Sw1 Off-YES

Off if Sw2 On -NO

SetOvrfeed 00:00:00

Overfeed 03:00:00

ManualTime 00:02:00

Proportional% 10

On If PPM< 2.00<

Off If pH> 7.95

Off If pH< 0.00

Off if RLY On 1

Cycle Time 00:02:00

On Limit 00:00:30

Off if Sw1 Off-YES

Off if Sw2 On -NO

SetOvrfeed 00:00:00

Overfeed 03:00:00

ManualTime 00:02:00

Proportional% 10

On If PPM< 2.00

Off If pH> 7.95<

Off If pH< 0.00

Off if RLY On 1

Cycle Time 00:02:00

On Limit 00:00:30

Off if Sw1 Off-YES

Off if Sw2 On -NO

SetOvrfeed 00:00:00

Overfeed 03:00:00

ManualTime 00:02:00

Proportional% 10

On If PPM< 2.00

Off If pH> 7.95

Off If pH< 0.00<

Off if RLY On 1

Cycle Time 00:02:00

On Limit 00:00:30

Off if Sw1 Off-YES

Off if Sw2 On -NO

SetOvrfeed 00:00:00

Overfeed 03:00:00

ManualTime 00:02:00

Proportional% 10

On If PPM< 2.00

Off If pH> 7.95

Off If pH< 0.00

Off if RLY On 1<

Cycle Time 00:02:00

On Limit 00:00:30

Off if Sw1 Off-YES

Off if Sw2 On -NO

SetOvrfeed 00:00:00

Overfeed 03:00:00

ManualTime 00:02:00

Proportional% 10

On If PPM< 2.00

Off If pH> 7.95

Off If pH< 0.00

Off if RLY On 1


On Limit 00:00:30

Off if Sw1 Off-YES

Off if Sw2 On -NO

SetOvrfeed 00:00:00

Overfeed 03:00:00

Use

the

keyp

ad to

ent

er th

e cy

cle

dura

tion,

incl

udin

g bo

th s

aniti

zer

feed

ON

tim

e an

d fe

ed O

FF ti

me.

Pres

s the

[Ent

er] k

ey to

con

firm

or

the

dow

n ar

row

key

to c

ance

l.

Bac

k

PP

M C

ycle

, Fee

d O

ff if

SW

1 is

Off

Ent

er

PP

M C

ycle

, Ind

epen

dent

of S

W1

Pres

s the

[Ent

er] k

ey to

mak

e th

esa

nitiz

er fe

ed d

epen

dent

or

inde

pend

ent o

f the

sta

tus

of th

e flo

wsw

itch

SW1.

On

Lim

it S

cree

nEnter new value

Current: 00:00:30

00:00:30

v-Cancel ^

Ent

er

PP

M C

ycle

, On

Lim

itManualTime 00:02:00

Proportional% 10

On If PPM< 2.00

Off If pH> 7.95

Off If pH< 0.00

Off if RLY On 1

Cycle Time 00:02:00

On Limit 00:00:30<

Off if Sw1 Off-YES

Off if Sw2 On -NO

SetOvrfeed 00:00:00

Overfeed 03:00:00

ManualTime 00:02:00

Proportional% 10

On If PPM< 2.00

Off If pH> 7.95

Off If pH< 0.00

Off if RLY On 1

Cycle Time 00:02:00

On Limit 00:00:30


Off if Sw2 On -NO

SetOvrfeed 00:00:00

Overfeed 03:00:00

ManualTime 00:02:00

Proportional% 10

On If PPM< 2.00

Off If pH> 7.95

Off If pH< 0.00

Off if RLY On 1

Cycle Time 00:02:00

On Limit 00:00:30

Off if Sw1 Off-NO <

Off if Sw2 On -NO

SetOvrfeed 00:00:00

Overfeed 03:00:00

Use

the

keyp

ad to

ent

er th

em

axim

um sa

nitiz

er fe

ed d

urat

ion.

Pres

s the

[Ent

er] k

ey to

con

firm

or

the

dow

n ar

row

key

to c

ance

l.

PP

M C

ycle

, Ind

epen

dent

of S

W2

Ent

er

PP

M C

ycle

, Fee

d O

ff if

SW

2 is

On

Pres

s the

[Ent

er] k

ey to

mak

e th

esa

nitiz

er fe

ed d

epen

dent

or

inde

pend

ent o

f the

sta

tus

of s

witc

h 2

(SW

2.)

ManualTime 00:02:00

Proportional% 10

On If PPM< 2.00

Off If pH> 7.95

Off If pH< 0.00

Off if RLY On 1

Cycle Time 00:02:00

On Limit 00:00:30

Off if Sw1 Off-YES


SetOvrfeed 00:00:00

Overfeed 03:00:00


Proportional% 10

On If PPM< 2.00

Off If pH> 7.95

Off If pH< 0.00

Off if RLY On 1

Cycle Time 00:02:00

On Limit 00:00:30

Off if Sw1 Off-YES


SetOvrfeed 00:00:00

Overfeed 03:00:00

AK

110

Pro

gram

min

g S

cree

n N

avig

atio

n, P

PM

Cyc

le T

ime,

Rev

322

Aug

200

8

76

AK

110

Pro

gram

min

g S

cree

n N

avig

atio

n, P

PM

Cyc

le T

ime

(2 o

f 2)

Set

poin

t Ove

rfee

d S

cree

n

Use

the

keyp

ad to

ent

er th

e da

ilym

axim

um a

ccum

ulat

ed fe

ed ti

me.

Pres

s the

[Ent

er] k

ey to

con

firm

or

the

dow

n ar

row

key

to c

ance

l.

Ove

rfeed

Scr

een

Enter new value

Current: 03:00:00

03:00:00

v-Cancel ^

Ent

er

Ent

er

PP

M C

ycle

, Set

poin

t Ove

rfee

d

PP

M C

ycle

, Ove

rfee

d

Use

the

keyp

ad to

ent

er th

e ru

ntim

eal

low

ed to

reac

h 5%

of s

etpo

int.

Dis

able

s rel

ay if

set

poin

t is

not m

et.

Pres

s the

[Ent

er] k

ey to

con

firm

or

the

dow

n ar

row

key

to c

ance

l.

Enter new value

Current: 00:00:00

00:00:00

v-Cancel ^

From

PPM

Cyc

le T

ime

(1 o

f 2)

ManualTime 00:02:00

Proportional% 10

On If PPM< 2.00

Off If pH> 7.95

Off If pH< 0.00

Off if RLY On 1

Cycle Time 00:02:00

On Limit 00:00:30

Off if Sw1 Off-YES

Off if Sw2 On -NO


Overfeed 03:00:00

ManualTime 00:02:00

Proportional% 10

On If PPM< 2.00

Off If pH> 7.95

Off If pH< 0.00

Off if RLY On 1

Cycle Time 00:02:00

On Limit 00:00:30

Off if Sw1 Off-YES

Off if Sw2 On -NO

SetOvrfeed 00:00:00

Overfeed 03:00:00<

AK

110

Pro

gram

min

g S

cree

n N

avig

atio

n, P

PM

Cyc

le T

ime,

Rev

322

Aug

200

8

77

AK

110

Pro

gram

min

g S

cree

n N

avig

atio

n, P

PM

Cyc

le T

ime

(2 o

f 2)

Set

poin

t Ove

rfee

d S

cree

n

Use

the

keyp

ad to

ent

er th

e da

ilym

axim

um a

ccum

ulat

ed fe

ed ti

me.

Pres

s the

[Ent

er] k

ey to

con

firm

or

the

dow

n ar

row

key

to c

ance

l.

Ove

rfeed

Scr

een

Enter new value

Current: 03:00:00

03:00:00

v-Cancel ^

Ent

er

Ent

er

PP

M C

ycle

, Set

poin

t Ove

rfee

d

PP

M C

ycle

, Ove

rfee

d

Use

the

keyp

ad to

ent

er th

e ru

ntim

eal

low

ed to

reac

h 5%

of s

etpo

int.

Dis

able

s rel

ay if

set

poin

t is

not m

et.

Pres

s the

[Ent

er] k

ey to

con

firm

or

the

dow

n ar

row

key

to c

ance

l.

Enter new value

Current: 00:00:00

00:00:00

v-Cancel ^

From

PPM

Cyc

le T

ime

(1 o

f 2)

ManualTime 00:02:00

Proportional% 10

On If PPM< 2.00

Off If pH> 7.95

Off If pH< 0.00

Off if RLY On 1

Cycle Time 00:02:00

On Limit 00:00:30

Off if Sw1 Off-YES

Off if Sw2 On -NO


Overfeed 03:00:00

ManualTime 00:02:00

Proportional% 10

On If PPM< 2.00

Off If pH> 7.95

Off If pH< 0.00

Off if RLY On 1

Cycle Time 00:02:00

On Limit 00:00:30

Off if Sw1 Off-YES

Off if Sw2 On -NO

SetOvrfeed 00:00:00

Overfeed 03:00:00<

AK

110

Pro

gram

min

g S

cree

n N

avig

atio

n, P

PM

Cyc

le T

ime,

Rev

322

Aug

200

8

78

pH

> 7.67-OFF 7.50s

ORP 490 -OFF 700s

PPM, Mix T-OFF

69.0f SW1OFFSW2OFF

Mai

n St

atus

Scr

een

Name:Main Pool

System

>Programming

Service

Data ( 8:441 )

Communications

Security Setup

Wizards

Serial # 123456

Con

figur

atio

n M

enu,

Pro

gram

min

g

AK

110

Pro

gram

min

g S

cree

n N

avig

atio

n, P

PM

Mix

Tim

e (1

of 2

)

Ent

erB

ack

1:pH, Mix Time

2:ORP, Mix Time

>3:PPM, Mix Time

A:Alarm

P:Pager1

P:Pager2

P:Pager3

P:Pager4

Pro

gram

min

g S

etup

Scr

een

PP

M M

ix, M

anua

l Fee

d T

ime

Ent

erB

ack

PP

M M

ix, P

ropo

rtio

nal F

eed

Per

cent

PP

M M

ix, L

ow P

PM

Set

poin

t

PP

M M

ix, F

eed

Off i

f Rel

ay is

On

Enter new value

Current: 00:02:00

00:02:00

v-Cancel ^

Man

ual F

eed

Tim

e S

cree

n

Use

the

keyp

ad to

ent

er th

e m

anua

lsa

nitiz

er fe

ed d

urat

ion.

Pres

s the

[Ent

er] k

ey to

con

firm

or

the

dow

n ar

row

key

to c

ance

l.

Ent

er

Pro

porti

onal

Fee

d P

erce

nt S

cree

n

Use

the

keyp

ad to

ent

er th

epr

opor

tiona

l fee

d pe

rcen

tage

.Pr

ess t

he [E

nter]

key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

Ent

er

Enter new value

Current: 10

10

v-Cancel ^

Enter new value

Current: 2.00

2.00

v-Cancel ^

Use

the

keyp

ad to

ent

er th

e lo

wPP

M v

alue

und

er w

hich

the

sani

tizer

will

feed

.Pr

ess t

he [E

nter]

key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

Ent

er

Low

PP

M S

etpo

int S

cree

n

Use

the

keyp

ad to

ent

er th

e nu

mbe

rof

a p

H fe

ed c

ontro

l rel

ay to

pre

vent

sim

ulta

neou

s ch

emic

al fe

ed.

Pres

s the

[Ent

er] k

ey to

con

firm

or

the

dow

n ar

row

key

to c

ance

l.

Ent

er

Feed

Off

if R

elay

is O

n S

cree

nEnter new value

Current: 1

1

v-Cancel ^

Use

the

keyp

ad to

ent

er th

e tim

ede

lay

betw

een

the s

etpo

int t

rigg

eran

d th

e ch

emica

l fee

d cy

cle

star

t.Pr

ess t

he [E

nter]

key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

Ent

er

Del

ay T

ime

Scr

een

Enter new value

Current: 00:00:20

00:00:20

v-Cancel ^

Ent

er

Ent

er

PP

M M

ix, H

igh

pH S

etpo

int

PP

M M

ix, L

ow p

H S

etpo

int

PP

M M

ix, D

elay

Tim

e

Enter new value

Current: 7.95

7.95

v-Cancel ^

Use

the

keyp

ad to

ent

er th

e hi

gh p

Hva

lue

over

whi

ch th

e sa

nitiz

er w

illno

t fee

d.Pr

ess t

he [E

nter]

key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

Enter new value

Current: 0.00

0.00

v-Cancel ^

Hig

h pH

Set

poin

t Scr

een

Low

pH

Set

poin

t Scr

een

Use

the

keyp

ad to

ent

er th

e lo

w p

Hva

lue

unde

r whi

ch th

e sa

nitiz

er w

illno

t fee

d.Pr

ess t

he [E

nter]

key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

Not

e:

The

rela

y 3

prog

ram

min

g m

enu

appe

ars i

n th

is fo

rmat

onl

y w

hen

rela

y 3

has b

een

conf

igur

ed fo

r"P

PM M

ix T

ime"

con

trol

.

To

PPM

Mix

Tim

e (2

of 2

)


Proportional% 10

On If PPM< 2.00

Off If PPM> 0.00

Off If pH> 7.95

Off If pH< 0.00

Off if RLY On 1

On DELAY 00:00:20

On Time 00:01:00

MinTimeOff 00:07:00

Off if Sw1 Off-YES

Off if Sw2 On -NO

SetOvrfeed 00:00:00

Overfeed 03:00:00

ManualTime 00:02:00

Proportional% 10<

On If PPM< 2.00

Off If pH> 7.95

Off If pH< 0.00

Off if RLY On 1

On DELAY 00:00:20

On Time 00:01:00

MinTimeOff 00:07:00

Off if Sw1 Off-YES

Off if Sw2 On -NO

SetOvrfeed 00:00:00

Overfeed 03:00:00

ManualTime 00:02:00

Proportional% 10

On If PPM< 2.00<

Off If pH> 7.95

Off If pH< 0.00

Off if RLY On 1

On DELAY 00:00:20

On Time 00:01:00

MinTimeOff 00:07:00

Off if Sw1 Off-YES

Off if Sw2 On -NO

SetOvrfeed 00:00:00

Overfeed 03:00:00

ManualTime 00:02:00

Proportional% 10

On If PPM< 2.00

Off If pH> 7.95<

Off If pH< 0.00

Off if RLY On 1

On DELAY 00:00:20

On Time 00:01:00

MinTimeOff 00:07:00

Off if Sw1 Off-YES

Off if Sw2 On -NO

SetOvrfeed 00:00:00

Overfeed 03:00:00

ManualTime 00:02:00

Proportional% 10

On If PPM< 2.00

Off If pH> 7.95

Off If pH< 0.00<

Off if RLY On 1

On DELAY 00:00:20

On Time 00:01:00

MinTimeOff 00:07:00

Off if Sw1 Off-YES

Off if Sw2 On -NO

SetOvrfeed 00:00:00

Overfeed 03:00:00

ManualTime 00:02:00

Proportional% 10

On If PPM< 2.00

Off If pH> 7.95

Off If pH< 0.00

Off if RLY On 1<

On DELAY 00:00:20

On Time 00:01:00

MinTimeOff 00:07:00

Off if Sw1 Off-YES

Off if Sw2 On -NO

SetOvrfeed 00:00:00

Overfeed 03:00:00

ManualTime 00:02:00

Proportional% 10

On If PPM< 2.00

Off If pH> 7.95

Off If pH< 0.00

Off if RLY On 1

On DELAY 00:00:20<

On Time 00:01:00

MinTimeOff 00:07:00

Off if Sw1 Off-YES

Off if Sw2 On -NO

SetOvrfeed 00:00:00

Overfeed 03:00:00

Bac

k

AK

110

Pro

gram

min

g S

cree

n N

avig

atio

n, P

PM

Mix

Tim

e, R

ev 3

22 A

ug 2

00810.12

79

pH

> 7.67-OFF 7.50s

ORP 490 -OFF 700s

PPM, Mix T-OFF

69.0f SW1OFFSW2OFF

Mai

n St

atus

Scr

een

Name:Main Pool

System

>Programming

Service

Data ( 8:441 )

Communications

Security Setup

Wizards

Serial # 123456

Con

figur

atio

n M

enu,

Pro

gram

min

g

AK

110

Pro

gram

min

g S

cree

n N

avig

atio

n, P

PM

Mix

Tim

e (1

of 2

)

Ent

erB

ack

1:pH, Mix Time

2:ORP, Mix Time

>3:PPM, Mix Time

A:Alarm

P:Pager1

P:Pager2

P:Pager3

P:Pager4

Pro

gram

min

g S

etup

Scr

een

PP

M M

ix, M

anua

l Fee

d T

ime

Ent

erB

ack

PP

M M

ix, P

ropo

rtio

nal F

eed

Per

cent

PP

M M

ix, L

ow P

PM

Set

poin

t

PP

M M

ix, F

eed

Off i

f Rel

ay is

On

Enter new value

Current: 00:02:00

00:02:00

v-Cancel ^

Man

ual F

eed

Tim

e S

cree

n

Use

the

keyp

ad to

ent

er th

e m

anua

lsa

nitiz

er fe

ed d

urat

ion.

Pres

s the

[Ent

er] k

ey to

con

firm

or

the

dow

n ar

row

key

to c

ance

l.

Ent

er

Pro

porti

onal

Fee

d P

erce

nt S

cree

n

Use

the

keyp

ad to

ent

er th

epr

opor

tiona

l fee

d pe

rcen

tage

.Pr

ess t

he [E

nter]

key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

Ent

er

Enter new value

Current: 10

10

v-Cancel ^

Enter new value

Current: 2.00

2.00

v-Cancel ^

Use

the

keyp

ad to

ent

er th

e lo

wPP

M v

alue

und

er w

hich

the

sani

tizer

will

feed

.Pr

ess t

he [E

nter]

key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

Ent

er

Low

PP

M S

etpo

int S

cree

n

Use

the

keyp

ad to

ent

er th

e nu

mbe

rof

a p

H fe

ed c

ontro

l rel

ay to

pre

vent

sim

ulta

neou

s ch

emic

al fe

ed.

Pres

s the

[Ent

er] k

ey to

con

firm

or

the

dow

n ar

row

key

to c

ance

l.

Ent

er

Feed

Off

if R

elay

is O

n S

cree

nEnter new value

Current: 1

1

v-Cancel ^

Use

the

keyp

ad to

ent

er th

e tim

ede

lay

betw

een

the s

etpo

int t

rigg

eran

d th

e ch

emica

l fee

d cy

cle

star

t.Pr

ess t

he [E

nter]

key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

Ent

er

Del

ay T

ime

Scr

een

Enter new value

Current: 00:00:20

00:00:20

v-Cancel ^

Ent

er

Ent

er

PP

M M

ix, H

igh

pH S

etpo

int

PP

M M

ix, L

ow p

H S

etpo

int

PP

M M

ix, D

elay

Tim

e

Enter new value

Current: 7.95

7.95

v-Cancel ^

Use

the

keyp

ad to

ent

er th

e hi

gh p

Hva

lue

over

whi

ch th

e sa

nitiz

er w

illno

t fee

d.Pr

ess t

he [E

nter]

key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

Enter new value

Current: 0.00

0.00

v-Cancel ^

Hig

h pH

Set

poin

t Scr

een

Low

pH

Set

poin

t Scr

een

Use

the

keyp

ad to

ent

er th

e lo

w p

Hva

lue

unde

r whi

ch th

e sa

nitiz

er w

illno

t fee

d.Pr

ess t

he [E

nter]

key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

Not

e:

The

rela

y 3

prog

ram

min

g m

enu

appe

ars i

n th

is fo

rmat

onl

y w

hen

rela

y 3

has b

een

conf

igur

ed fo

r"P

PM M

ix T

ime"

con

trol

.

To

PPM

Mix

Tim

e (2

of 2

)


Proportional% 10

On If PPM< 2.00

Off If PPM> 0.00

Off If pH> 7.95

Off If pH< 0.00

Off if RLY On 1

On DELAY 00:00:20

On Time 00:01:00

MinTimeOff 00:07:00

Off if Sw1 Off-YES

Off if Sw2 On -NO

SetOvrfeed 00:00:00

Overfeed 03:00:00

ManualTime 00:02:00

Proportional% 10<

On If PPM< 2.00

Off If pH> 7.95

Off If pH< 0.00

Off if RLY On 1

On DELAY 00:00:20

On Time 00:01:00

MinTimeOff 00:07:00

Off if Sw1 Off-YES

Off if Sw2 On -NO

SetOvrfeed 00:00:00

Overfeed 03:00:00

ManualTime 00:02:00

Proportional% 10

On If PPM< 2.00<

Off If pH> 7.95

Off If pH< 0.00

Off if RLY On 1

On DELAY 00:00:20

On Time 00:01:00

MinTimeOff 00:07:00

Off if Sw1 Off-YES

Off if Sw2 On -NO

SetOvrfeed 00:00:00

Overfeed 03:00:00

ManualTime 00:02:00

Proportional% 10

On If PPM< 2.00

Off If pH> 7.95<

Off If pH< 0.00

Off if RLY On 1

On DELAY 00:00:20

On Time 00:01:00

MinTimeOff 00:07:00

Off if Sw1 Off-YES

Off if Sw2 On -NO

SetOvrfeed 00:00:00

Overfeed 03:00:00

ManualTime 00:02:00

Proportional% 10

On If PPM< 2.00

Off If pH> 7.95

Off If pH< 0.00<

Off if RLY On 1

On DELAY 00:00:20

On Time 00:01:00

MinTimeOff 00:07:00

Off if Sw1 Off-YES

Off if Sw2 On -NO

SetOvrfeed 00:00:00

Overfeed 03:00:00

ManualTime 00:02:00

Proportional% 10

On If PPM< 2.00

Off If pH> 7.95

Off If pH< 0.00

Off if RLY On 1<

On DELAY 00:00:20

On Time 00:01:00

MinTimeOff 00:07:00

Off if Sw1 Off-YES

Off if Sw2 On -NO

SetOvrfeed 00:00:00

Overfeed 03:00:00

ManualTime 00:02:00

Proportional% 10

On If PPM< 2.00

Off If pH> 7.95

Off If pH< 0.00

Off if RLY On 1

On DELAY 00:00:20<

On Time 00:01:00

MinTimeOff 00:07:00

Off if Sw1 Off-YES

Off if Sw2 On -NO

SetOvrfeed 00:00:00

Overfeed 03:00:00

Bac

k

AK

110

Pro

gram

min

g S

cree

n N

avig

atio

n, P

PM

Mix

Tim

e, R

ev 3

22 A

ug 2

008

80

AK

110

Pro

gram

min

g S

cree

n N

avig

atio

n, P

PM

Mix

Tim

e (2

of 2

)

PP

M M

ix, F

eed

Off

if S

W1

is O

ff

PP

M M

ix, I

ndep

ende

nt o

f SW

2

Ent

er

Ent

er

Set

poin

t Ove

rfee

d S

cree

n

Use

the

keyp

ad to

ent

er th

e da

ilym

axim

um a

ccum

ulat

ed fe

ed ti

me.

Pres

s the

[Ent

er] k

ey to

con

firm

or

the

dow

n ar

row

key

to c

ance

l.

Ove

rfeed

Scr

een

Enter new value

Current: 03:00:00

03:00:00

v-Cancel ^

Ent

er

Ent

er

PP

M M

ix, S

etpo

int O

verf

eed

PP

M M

ix, O

verf

eed

PP

M M

ix, I

ndep

ende

nt o

f SW

1

PP

M M

ix, F

eed

Off

if S

W2

is O

ff

Use

the

keyp

ad to

ente

r the

runt

ime

allo

wed

to re

ach 5

% o

f set

poin

t.D

isab

les r

elay

if se

tpoi

nt is

not

met

.Pr

ess t

he [E

nter

] key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

Enter new value

Current: 00:00:00

00:00:00

v-Cancel ^

Pres

s the

[Ent

er] k

ey to

mak

e th

esa

nitiz

er fe

ed d

epen

dent

or

inde

pend

ent o

f the

stat

us o

f sw

itch

2(S

W2.

)

Pres

s the

[Ent

er] k

ey to

mak

e th

esa

nitiz

er fe

ed d

epen

dent

or

inde

pend

ent o

f the

sta

tus

of th

e flo

wsw

itch

SW1.

Fro

m P

PM M

ix T

ime (

1 of

2)

ManualTime 00:02:00

Proportional% 10

On If PPM< 2.00

Off If pH> 7.95

Off If pH< 0.00

Off if RLY On 1

On DELAY 00:00:20

On Time 00:01:00

MinTimeOff 00:07:00


Off if Sw2 On -NO

SetOvrfeed 00:00:00

Overfeed 03:00:00

ManualTime 00:02:00

Proportional% 10

On If PPM< 2.00

Off If pH> 7.95

Off If pH< 0.00

Off if RLY On 1

On DELAY 00:00:20

On Time 00:01:00

MinTimeOff 00:07:00

Off if Sw1 Off-YES


SetOvrfeed 00:00:00

Overfeed 03:00:00

ManualTime 00:02:00

Proportional% 10

On If PPM< 2.00

Off If pH> 7.95

Off If pH< 0.00

Off if RLY On 1

On DELAY 00:00:20

On Time 00:01:00

MinTimeOff 00:07:00

Off if Sw1 Off-YES

Off if Sw2 On –NO


Overfeed 03:00:00

ManualTime 00:02:00

Proportional% 10

On If PPM< 2.00

Off If pH> 7.95

Off If pH< 0.00

Off if RLY On 1

On DELAY 00:00:20

On Time 00:01:00

MinTimeOff 00:07:00

Off if Sw1 Off-YES

Off if Sw2 On –NO

SetOvrfeed 00:00:00

Overfeed 03:00:00<

ManualTime 00:02:00

Proportional% 10

On If PPM< 2.00

Off If pH> 7.95

Off If pH< 0.00

Off if RLY On 1

On DELAY 00:00:20

On Time 00:01:00

MinTimeOff 00:07:00

Off if Sw1 Off-NO <

Off if Sw2 On -NO

SetOvrfeed 00:00:00

Overfeed 03:00:00

ManualTime 00:02:00

Proportional% 10

On If PPM< 2.00

Off If pH> 7.95

Off If pH< 0.00

Off if RLY On 1

On DELAY 00:00:20

On Time 00:01:00

MinTimeOff 00:07:00

Off if Sw1 Off-YES


SetOvrfeed 00:00:00

Overfeed 03:00:00

PP

M M

ix, M

inim

um T

ime

Off

Ent

er

Use

the

keyp

ad to

ente

r the

am

ount

of ti

me

the

relay

will

be

held

off

durin

g a

feed

cyc

le to

allo

w m

ixin

g.Pr

ess t

he [E

nter

] key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

Min

imum

Tim

e Of

f Scr

een

Enter new value

Current: 00:07:00

00:07:00

v-Cancel ^

ManualTime 00:02:00

Proportional% 10

On If PPM< 2.00

Off If pH> 7.95

Off If pH< 0.00

Off if RLY On 1

On DELAY 00:00:20

On Time 00:01:00<

MinTimeOff 00:07:00

Off if Sw1 Off-YES

Off if Sw2 On -NO

SetOvrfeed 00:00:00

Overfeed 03:00:00

ManualTime 00:02:00

Proportional% 10

On If PPM< 2.00

Off If pH> 7.95

Off If pH< 0.00

Off if RLY On 1

On DELAY 00:00:20

On Time 00:01:00


Off if Sw1 Off-YES

Off if Sw2 On -NO

SetOvrfeed 00:00:00

Overfeed 03:00:00

Use

the

keyp

ad to

ent

er th

em

axim

um sa

nitiz

er fe

ed d

urat

ion.

Pres

s the

[Ent

er] k

ey to

con

firm

or

the

dow

n ar

row

key

to c

ance

l.

On

Tim

e S

cree

nEnter new value

Current: 00:01:00

00:01:00

v-Cancel ^

Ent

er

PP

M M

ix, O

n T

ime

AK

110

Pro

gram

min

g S

cree

n N

avig

atio

n, P

PM

Mix

Tim

e, R

ev 3

22 A

ug 2

008

81

AK

110

Pro

gram

min

g S

cree

n N

avig

atio

n, P

PM

Mix

Tim

e (2

of 2

)

PP

M M

ix, F

eed

Off

if S

W1

is O

ff

PP

M M

ix, I

ndep

ende

nt o

f SW

2

Ent

er

Ent

er

Set

poin

t Ove

rfee

d S

cree

n

Use

the

keyp

ad to

ent

er th

e da

ilym

axim

um a

ccum

ulat

ed fe

ed ti

me.

Pres

s the

[Ent

er] k

ey to

con

firm

or

the

dow

n ar

row

key

to c

ance

l.

Ove

rfeed

Scr

een

Enter new value

Current: 03:00:00

03:00:00

v-Cancel ^

Ent

er

Ent

er

PP

M M

ix, S

etpo

int O

verf

eed

PP

M M

ix, O

verf

eed

PP

M M

ix, I

ndep

ende

nt o

f SW

1

PP

M M

ix, F

eed

Off

if S

W2

is O

ff

Use

the

keyp

ad to

ente

r the

runt

ime

allo

wed

to re

ach 5

% o

f set

poin

t.D

isab

les r

elay

if se

tpoi

nt is

not

met

.Pr

ess t

he [E

nter

] key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

Enter new value

Current: 00:00:00

00:00:00

v-Cancel ^

Pres

s the

[Ent

er] k

ey to

mak

e th

esa

nitiz

er fe

ed d

epen

dent

or

inde

pend

ent o

f the

stat

us o

f sw

itch

2(S

W2.

)

Pres

s the

[Ent

er] k

ey to

mak

e th

esa

nitiz

er fe

ed d

epen

dent

or

inde

pend

ent o

f the

sta

tus

of th

e flo

wsw

itch

SW1.

Fro

m P

PM M

ix T

ime (

1 of

2)

ManualTime 00:02:00

Proportional% 10

On If PPM< 2.00

Off If pH> 7.95

Off If pH< 0.00

Off if RLY On 1

On DELAY 00:00:20

On Time 00:01:00

MinTimeOff 00:07:00


Off if Sw2 On -NO

SetOvrfeed 00:00:00

Overfeed 03:00:00

ManualTime 00:02:00

Proportional% 10

On If PPM< 2.00

Off If pH> 7.95

Off If pH< 0.00

Off if RLY On 1

On DELAY 00:00:20

On Time 00:01:00

MinTimeOff 00:07:00

Off if Sw1 Off-YES


SetOvrfeed 00:00:00

Overfeed 03:00:00

ManualTime 00:02:00

Proportional% 10

On If PPM< 2.00

Off If pH> 7.95

Off If pH< 0.00

Off if RLY On 1

On DELAY 00:00:20

On Time 00:01:00

MinTimeOff 00:07:00

Off if Sw1 Off-YES

Off if Sw2 On –NO


Overfeed 03:00:00

ManualTime 00:02:00

Proportional% 10

On If PPM< 2.00

Off If pH> 7.95

Off If pH< 0.00

Off if RLY On 1

On DELAY 00:00:20

On Time 00:01:00

MinTimeOff 00:07:00

Off if Sw1 Off-YES

Off if Sw2 On –NO

SetOvrfeed 00:00:00

Overfeed 03:00:00<

ManualTime 00:02:00

Proportional% 10

On If PPM< 2.00

Off If pH> 7.95

Off If pH< 0.00

Off if RLY On 1

On DELAY 00:00:20

On Time 00:01:00

MinTimeOff 00:07:00

Off if Sw1 Off-NO <

Off if Sw2 On -NO

SetOvrfeed 00:00:00

Overfeed 03:00:00

ManualTime 00:02:00

Proportional% 10

On If PPM< 2.00

Off If pH> 7.95

Off If pH< 0.00

Off if RLY On 1

On DELAY 00:00:20

On Time 00:01:00

MinTimeOff 00:07:00

Off if Sw1 Off-YES


SetOvrfeed 00:00:00

Overfeed 03:00:00

PP

M M

ix, M

inim

um T

ime

Off

Ent

er

Use

the

keyp

ad to

ente

r the

am

ount

of ti

me

the

relay

will

be

held

off

durin

g a

feed

cyc

le to

allo

w m

ixin

g.Pr

ess t

he [E

nter

] key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

Min

imum

Tim

e Of

f Scr

een

Enter new value

Current: 00:07:00

00:07:00

v-Cancel ^

ManualTime 00:02:00

Proportional% 10

On If PPM< 2.00

Off If pH> 7.95

Off If pH< 0.00

Off if RLY On 1

On DELAY 00:00:20

On Time 00:01:00<

MinTimeOff 00:07:00

Off if Sw1 Off-YES

Off if Sw2 On -NO

SetOvrfeed 00:00:00

Overfeed 03:00:00

ManualTime 00:02:00

Proportional% 10

On If PPM< 2.00

Off If pH> 7.95

Off If pH< 0.00

Off if RLY On 1

On DELAY 00:00:20

On Time 00:01:00


Off if Sw1 Off-YES

Off if Sw2 On -NO

SetOvrfeed 00:00:00

Overfeed 03:00:00

Use

the

keyp

ad to

ent

er th

em

axim

um sa

nitiz

er fe

ed d

urat

ion.

Pres

s the

[Ent

er] k

ey to

con

firm

or

the

dow

n ar

row

key

to c

ance

l.

On

Tim

e S

cree

nEnter new value

Current: 00:01:00

00:01:00

v-Cancel ^

Ent

er

PP

M M

ix, O

n T

ime

AK

110

Pro

gram

min

g S

cree

n N

avig

atio

n, P

PM

Mix

Tim

e, R

ev 3

22 A

ug 2

008

82

pH

> 7.67-OFF 7.50s

ORP 490 -OFF 700s

ProbeClean-OFF

69.0f SW1OFFSW2OFF

Mai

n S

tatu

s S

cree

n Name:Main Pool

System

>Programming

Service

Data ( 8:441 )

Communications

Security Setup

Wizards

Serial # 123456

Con

figur

atio

n M

enu,

Pro

gram

min

g

AK

110

Pro

gram

min

g S

cree

n N

avig

atio

n, P

robe

Cle

an

Ent

erB

ack

1:pH, Mix Time

2:ORP, Mix Time

>3:ProbeClean

A:Alarm

P:Pager1

P:Pager2

P:Pager3

P:Pager4

Pro

gram

ming

Set

up S

cree

n

Pro

be C

lean

, Man

ual C

ycle

Tim

e

Ent

erB

ack

Enter new value

Current: 00:02:00

00:02:00

v-Cancel ^

Man

ual C

ycle

Tim

e S

cree

n

Use

the

keyp

ad to

ente

r the

man

ual

prob

e cl

eani

ng cy

cle

dura

tion.

Pres

s the

[Ent

er] k

ey to

con

firm

or

the

dow

n ar

row

key

to c

ance

l.

Ent

er

Ent

er

Ent

er

Enter new value

Current: 00:00:02

00:00:02

v-Cancel ^

Pro

be C

lean

, Inde

pend

ent o

f SW

1

Pres

s the

[Ent

er] k

ey to

mak

e th

epr

obe

clea

ning

cyc

le d

epen

dent

or

inde

pend

ent o

f the

sta

tus

of th

e flo

wsw

itch

SW1.

Not

e:

The

rela

y 3

prog

ram

min

g m

enu

appe

ars i

n th

is fo

rmat

onl

y w

hen

rela

y 3

has b

een c

onfig

ured

for

"Pro

beC

lean

" co

ntro

l.


On IfTime> 00:00:02

OffIfTime> 00:00:20

Off if Sw1 Off-YES

Pro

be C

lean

, Pro

be C

lean

Sta

rt T

ime

ManualTime 00:02:00

On IfTime> 00:00:02<

OffIfTime> 00:00:20

Off if Sw1 Off-YES

Ent

er

Pro

be C

lean

, Pro

be C

lean

Sto

p T

ime

ManualTime 00:02:00

On IfTime> 00:00:02

OffIfTime> 00:00:20<

Off if Sw1 Off-YES

Pro

be C

lean

, Off

if S

W1

is O


On IfTime> 00:00:02

OffIfTime> 00:00:20


ManualTime 00:02:00

On IfTime> 00:00:02

OffIfTime> 00:00:20

Off if Sw1 Off-NO <

Enter new value

Current: 00:00:20

00:00:20

v-Cancel ^

Use

the

keyp

ad to

ente

r the

tim

e to

end

the

prob

e cle

anin

g cy

cle.

Pres

s the

[Ent

er] k

ey to

con

firm

or

the

dow

n ar

row

key

to c

ance

l.

Use

the

keyp

ad to

ente

r the

tim

e to

begi

n th

e pr

obe

clea

ning

cyc

le.

Pres

s the

[Ent

er] k

ey to

con

firm

or

the

dow

n ar

row

key

to c

ance

l.

Pro

be C

lean

Sto

p T

ime

Scr

een

Pro

be C

lean

Sta

rt T

ime

Scr

een

Bac

k

AK

110

Pro

gram

min

g S

cree

n N

avig

atio

n, P

robe

Cle

an, R

ev 3

22 A

ug 2

008

10.13

83

pH

> 7.67-OFF 7.50s

ORP 490 -OFF 700s

ProbeClean-OFF

69.0f SW1OFFSW2OFF

Mai

n S

tatu

s S

cree

n Name:Main Pool

System

>Programming

Service

Data ( 8:441 )

Communications

Security Setup

Wizards

Serial # 123456

Con

figur

atio

n M

enu,

Pro

gram

min

g

AK

110

Pro

gram

min

g S

cree

n N

avig

atio

n, P

robe

Cle

an

Ent

erB

ack

1:pH, Mix Time

2:ORP, Mix Time

>3:ProbeClean

A:Alarm

P:Pager1

P:Pager2

P:Pager3

P:Pager4

Pro

gram

ming

Set

up S

cree

n

Pro

be C

lean

, Man

ual C

ycle

Tim

e

Ent

erB

ack

Enter new value

Current: 00:02:00

00:02:00

v-Cancel ^

Man

ual C

ycle

Tim

e S

cree

n

Use

the

keyp

ad to

ente

r the

man

ual

prob

e cl

eani

ng cy

cle

dura

tion.

Pres

s the

[Ent

er] k

ey to

con

firm

or

the

dow

n ar

row

key

to c

ance

l.

Ent

er

Ent

er

Ent

er

Enter new value

Current: 00:00:02

00:00:02

v-Cancel ^

Pro

be C

lean

, Inde

pend

ent o

f SW

1

Pres

s the

[Ent

er] k

ey to

mak

e th

epr

obe

clea

ning

cyc

le d

epen

dent

or

inde

pend

ent o

f the

sta

tus

of th

e flo

wsw

itch

SW1.

Not

e:

The

rela

y 3

prog

ram

min

g m

enu

appe

ars i

n th

is fo

rmat

onl

y w

hen

rela

y 3

has b

een c

onfig

ured

for

"Pro

beC

lean

" co

ntro

l.


On IfTime> 00:00:02

OffIfTime> 00:00:20

Off if Sw1 Off-YES

Pro

be C

lean

, Pro

be C

lean

Sta

rt T

ime

ManualTime 00:02:00

On IfTime> 00:00:02<

OffIfTime> 00:00:20

Off if Sw1 Off-YES

Ent

er

Pro

be C

lean

, Pro

be C

lean

Sto

p T

ime

ManualTime 00:02:00

On IfTime> 00:00:02


Off if Sw1 Off-YES

Pro

be C

lean

, Off

if S

W1

is O


On IfTime> 00:00:02

OffIfTime> 00:00:20


ManualTime 00:02:00

On IfTime> 00:00:02

OffIfTime> 00:00:20

Off if Sw1 Off-NO <

Enter new value

Current: 00:00:20

00:00:20

v-Cancel ^

Use

the

keyp

ad to

ente

r the

tim

e to

end

the

prob

e cle

anin

g cy

cle.

Pres

s the

[Ent

er] k

ey to

con

firm

or

the

dow

n ar

row

key

to c

ance

l.

Use

the

keyp

ad to

ente

r the

tim

e to

begi

n th

e pr

obe

clea

ning

cyc

le.

Pres

s the

[Ent

er] k

ey to

con

firm

or

the

dow

n ar

row

key

to c

ance

l.

Pro

be C

lean

Sto

p T

ime

Scr

een

Pro

be C

lean

Sta

rt T

ime

Scr

een

Bac

k

AK

110

Pro

gram

min

g S

cree

n N

avig

atio

n, P

robe

Cle

an, R

ev 3

22 A

ug 2

008

84

10.14

pH

> 7.67-OFF 7.50s

ORP 490 -OFF 700s

Heater 68.-OFF 77.0s

SW1OFFSW2OFF

Mai

n St

atus

Scr

een

Name:Main Pool

System

>Programming

Service

Data ( 8:441 )

Communications

Security Setup

Wizards

Serial # 123456

Con

figur

atio

n M

enu,

Pro

gram

min

g

AK

110

Pro

gram

min

g S

cree

n N

avig

atio

n, H

eate

r

Ent

erB

ack

1:pH, Mix Time

2:ORP, Mix Time

>3:Heater

A:Alarm

P:Pager1

P:Pager2

P:Pager3

P:Pager4

Pro

gram

min

g S

etup

Scr

een

Hea

ter,

Man

ual C

ycle

Tim

e

Ent

erB

ack

Enter new value

Current: 00:02:00

00:02:00

v-Cancel ^

Man

ual C

ycle

Tim

e S

cree

n

Use

the

keyp

ad to

ent

er th

e m

anua

lhe

ater

on-

time

dura

tion.

Pres

s the

[Ent

er] k

ey to

con

firm

or

the

dow

n ar

row

key

to c

ance

l.

Ent

er

Ent

er

Ent

er

Enter new value

Current: 77.0

77.0

v-Cancel ^

Hea

ter,

Ove

rfee

d

Pres

s the

[Ent

er] k

ey to

mak

e th

ehe

ater

ope

ratio

n de

pend

ent o

rin

depe

nden

t of t

he s

tatu

s of

the

flow

switc

h SW

1.

Not

e:

The

rela

y 3

prog

ram

min

g m

enu

appe

ars i

n th

is fo

rmat

onl

y w

hen

rela

y 3

has b

een

conf

igur

ed fo

r"H

eate

r" co

ntro

l.

Hea

ter,

Low

Tem

pera

ture

Set

poin

t

Ent

er

Hea

ter,

Min

imum

Tim

e O

n

Hea

ter,

Min

imum

Tim

e O

ff

Enter new value

Current: 00:01:00

00:01:00

v-Cancel ^

Use

the

keyp

ad to

ent

er th

e tim

ede

lay

betw

een

the s

etpo

int t

rigg

eran

d th

e he

ater

cyc

le s

tart

.Pr

ess t

he [E

nter]

key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

Use

the

keyp

ad to

ent

er th

e lo

wte

mpe

ratu

re se

tpoin

t for

hea

ter

cont

rol.

Pres

s the

[Ent

er] k

ey to

con

firm

or

the

dow

n ar

row

key

to c

ance

l.

On

Del

ay S

cree

n

Low

Tem

pera

ture

Set

poin

t Scr

een

ManualTime 00:02:00

On If Temp< 77.0

Off if Sw1 Off-NO <

On DELAY 00:01:00

MinTime On 00:02:00

MinTimeOff 00:02:00

Overfeed 05:00:00


On If Temp< 77.0

Off if Sw1 Off-YES

On DELAY 00:01:00

MinTime On 00:02:00

MinTimeOff 00:02:00

Overfeed 05:00:00

ManualTime 00:02:00

On If Temp< 77.0<

Off if Sw1 Off-YES

On DELAY 00:01:00

MinTime On 00:02:00

MinTimeOff 00:02:00

Overfeed 05:00:00

ManualTime 00:02:00

On If Temp< 77.0


On DELAY 00:01:00

MinTime On 00:02:00

MinTimeOff 00:02:00

Overfeed 05:00:00

ManualTime 00:02:00

On If Temp< 77.0

Off if Sw1 Off-YES

On DELAY 00:01:00<

MinTime On 00:02:00

MinTimeOff 00:02:00

Overfeed 05:00:00


On If Temp< 77.0

Off if Sw1 Off-YES

On DELAY 00:01:00

MinTime On 00:02:00<

MinTimeOff 00:02:00

Overfeed 05:00:00

ManualTime 00:02:00

On If Temp< 77.0

Off if Sw1 Off-YES

On DELAY 00:01:00

MinTime On 00:02:00


Overfeed 05:00:00

ManualTime 00:02:00

On If Temp< 77.0

Off if Sw1 Off-YES

On DELAY 00:01:00

MinTime On 00:02:00

MinTimeOff 00:02:00

Overfeed 05:00:00<

Hea

ter,

Off

if S

W1

is O

ffH

eate

r, In

depe

nden

t of S

W1

Ent

er

Hea

ter,

On

Del

ay

Ent

er

Enter new value

Current: 00:02:00

00:02:00

v-Cancel ^

Use

the

keyp

ad to

ent

er th

em

inim

um a

mou

nt o

f tim

e th

e he

ater

will

be t

urne

d on

.Pr

ess t

he [E

nter]

key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

Min

imum

Tim

e O

n S

cree

n

Ent

er

Enter new value

Current: 00:02:00

00:02:00

v-Cancel ^

Min

imum

Tim

e O

ff S

cree

n

Use

the

keyp

ad to

ent

er th

e am

ount

of ti

me

the

heate

r will

be

held

off

befo

re it

is a

llow

ed to

turn

on

agai

n.Pr

ess t

he [E

nter]

key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

Enter new value

Current: 05:00:00

05:00:00

v-Cancel ^

Ove

rfeed

Scr

een

Use

the

keyp

ad to

ent

er th

e da

ilym

axim

um a

ccum

ulat

ed h

eate

r on-

time.

Pres

s the

[Ent

er] k

ey to

con

firm

or

the

dow

n ar

row

key

to c

ance

l.

Bac

k

AK

110

Pro

gram

min

g S

cree

n N

avig

atio

n, H

eate

r, R

ev 3

22 A

ug 2

008

85

pH

> 7.67-OFF 7.50s

ORP 490 -OFF 700s

Heater 68.-OFF 77.0s

SW1OFFSW2OFF

Mai

n St

atus

Scr

een

Name:Main Pool

System

>Programming

Service

Data ( 8:441 )

Communications

Security Setup

Wizards

Serial # 123456

Con

figur

atio

n M

enu,

Pro

gram

min

g

AK

110

Pro

gram

min

g S

cree

n N

avig

atio

n, H

eate

r

Ent

erB

ack

1:pH, Mix Time

2:ORP, Mix Time

>3:Heater

A:Alarm

P:Pager1

P:Pager2

P:Pager3

P:Pager4

Pro

gram

min

g S

etup

Scr

een

Hea

ter,

Man

ual C

ycle

Tim

e

Ent

erB

ack

Enter new value

Current: 00:02:00

00:02:00

v-Cancel ^

Man

ual C

ycle

Tim

e S

cree

n

Use

the

keyp

ad to

ent

er th

e m

anua

lhe

ater

on-

time

dura

tion.

Pres

s the

[Ent

er] k

ey to

con

firm

or

the

dow

n ar

row

key

to c

ance

l.

Ent

er

Ent

er

Ent

er

Enter new value

Current: 77.0

77.0

v-Cancel ^

Hea

ter,

Ove

rfee

d

Pres

s the

[Ent

er] k

ey to

mak

e th

ehe

ater

ope

ratio

n de

pend

ent o

rin

depe

nden

t of t

he s

tatu

s of

the

flow

switc

h SW

1.

Not

e:

The

rela

y 3

prog

ram

min

g m

enu

appe

ars i

n th

is fo

rmat

onl

y w

hen

rela

y 3

has b

een

conf

igur

ed fo

r"H

eate

r" co

ntro

l.

Hea

ter,

Low

Tem

pera

ture

Set

poin

t

Ent

er

Hea

ter,

Min

imum

Tim

e O

n

Hea

ter,

Min

imum

Tim

e O

ff

Enter new value

Current: 00:01:00

00:01:00

v-Cancel ^

Use

the

keyp

ad to

ent

er th

e tim

ede

lay

betw

een

the s

etpo

int t

rigg

eran

d th

e he

ater

cyc

le s

tart

.Pr

ess t

he [E

nter]

key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

Use

the

keyp

ad to

ent

er th

e lo

wte

mpe

ratu

re se

tpoin

t for

hea

ter

cont

rol.

Pres

s the

[Ent

er] k

ey to

con

firm

or

the

dow

n ar

row

key

to c

ance

l.

On

Del

ay S

cree

n

Low

Tem

pera

ture

Set

poin

t Scr

een

ManualTime 00:02:00

On If Temp< 77.0

Off if Sw1 Off-NO <

On DELAY 00:01:00

MinTime On 00:02:00

MinTimeOff 00:02:00

Overfeed 05:00:00


On If Temp< 77.0

Off if Sw1 Off-YES

On DELAY 00:01:00

MinTime On 00:02:00

MinTimeOff 00:02:00

Overfeed 05:00:00

ManualTime 00:02:00

On If Temp< 77.0<

Off if Sw1 Off-YES

On DELAY 00:01:00

MinTime On 00:02:00

MinTimeOff 00:02:00

Overfeed 05:00:00

ManualTime 00:02:00

On If Temp< 77.0


On DELAY 00:01:00

MinTime On 00:02:00

MinTimeOff 00:02:00

Overfeed 05:00:00

ManualTime 00:02:00

On If Temp< 77.0

Off if Sw1 Off-YES

On DELAY 00:01:00<

MinTime On 00:02:00

MinTimeOff 00:02:00

Overfeed 05:00:00


On If Temp< 77.0

Off if Sw1 Off-YES

On DELAY 00:01:00


MinTimeOff 00:02:00

Overfeed 05:00:00

ManualTime 00:02:00

On If Temp< 77.0

Off if Sw1 Off-YES

On DELAY 00:01:00

MinTime On 00:02:00


Overfeed 05:00:00

ManualTime 00:02:00

On If Temp< 77.0

Off if Sw1 Off-YES

On DELAY 00:01:00

MinTime On 00:02:00

MinTimeOff 00:02:00

Overfeed 05:00:00<

Hea

ter,

Off

if S

W1

is O

ffH

eate

r, In

depe

nden

t of S

W1

Ent

er

Hea

ter,

On

Del

ay

Ent

er

Enter new value

Current: 00:02:00

00:02:00

v-Cancel ^

Use

the

keyp

ad to

ent

er th

em

inim

um a

mou

nt o

f tim

e th

e he

ater

will

be t

urne

d on

.Pr

ess t

he [E

nter]

key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

Min

imum

Tim

e O

n S

cree

n

Ent

er

Enter new value

Current: 00:02:00

00:02:00

v-Cancel ^

Min

imum

Tim

e O

ff S

cree

n

Use

the

keyp

ad to

ent

er th

e am

ount

of ti

me

the

heate

r will

be

held

off

befo

re it

is a

llow

ed to

turn

on

agai

n.Pr

ess t

he [E

nter]

key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

Enter new value

Current: 05:00:00

05:00:00

v-Cancel ^

Ove

rfeed

Scr

een

Use

the

keyp

ad to

ent

er th

e da

ilym

axim

um a

ccum

ulat

ed h

eate

r on-

time.

Pres

s the

[Ent

er] k

ey to

con

firm

or

the

dow

n ar

row

key

to c

ance

l.

Bac

k

AK

110

Pro

gram

min

g S

cree

n N

avig

atio

n, H

eate

r, R

ev 3

22 A

ug 2

008

86

pH

> 7.67-OFF 7.50s

ORP 490 -OFF 700s

Alarm Out -OFF

69.0f SW1OFFSW2OFF

Mai

n St

atus

Scr

een

Name:Main Pool

System

>Programming

Service

Data ( 8:441 )

Communications

Security Setup

Wizards

Serial # 123456

Con

figur

atio

n M

enu,

Pro

gram

min

g

AK

110

Pro

gram

min

g S

cree

n N

avig

atio

n, A

larm

Out

(1 o

f 2)

Ent

erB

ack

1:pH, Mix Time

2:ORP, Mix Time

>3:Alarm Out

A:Alarm

P:Pager1

P:Pager2

P:Pager3

P:Pager4

Pro

gram

min

g S

etup

Scr

een

Ala

rm O

ut, O

n if

Pan

el A

larm

is O

n

Ent

erB

ack

Ala

rm O

ut, O

n if

SW1

is O

ff

Ala

rm O

ut, L

ow O

RP

Set

poin

t

Ala

rm O

ut, N

ot O

n if

Pan

el A

larm

is O

n

Pres

s the

[Ente

r] k

ey to

cho

ose

whe

ther

the

alar

m o

ut re

lay

is tu

rned

on w

hen

the

AK11

0 fr

ont p

anel

alar

m in

dica

tor i

s on

.

Ent

er

Ala

rm O

ut, N

ot O

n if

SW

1 is

Off

Ent

er

Enter new value

Current: 630

630

v-Cancel ^

Use

the

keyp

ad to

ent

er th

e lo

wO

RP

valu

e un

der w

hich

the

alar

mou

t rel

ay w

ill tu

rn o

n.Pr

ess t

he [E

nter]

key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

Ent

er

Low

OR

P S

etpo

int S

cree

n

Ent

er

Ala

rm O

ut, H

igh

pH S

etpo

int

Enter new value

Current: 8.00

8.00

v-Cancel ^

Use

the

keyp

ad to

ent

er th

e hi

gh p

Hva

lue

over

whi

ch th

e ala

rm o

ut re

lay

will

turn

on.

Pres

s the

[Ent

er] k

ey to

con

firm

or

the

dow

n ar

row

key

to c

ance

l.

Hig

h pH

Set

poin

t Scr

een

Not

e:

The

rela

y 3

prog

ram

min

g m

enu

appe

ars i

n th

is fo

rmat

onl

y w

hen

rela

y 3

has b

een

conf

igur

ed fo

r"A

larm

Out

" con

trol

.

The

optio

ns a

vaila

ble

on th

eAl

arm

Out

Scr

een

prog

ram

min

gm

enu

may

var

y in

acc

orda

nce

with

the

chos

en c

onfig

urat

ions

for

rela

ys 1

and

2.

Ala

rm O

ut, H

igh

OR

P S

etpo

int

Ent

er

Hig

h O

RP

Set

poin

t Scr

een

To

Ala

rm O

ut (2

of 2

)

On If Alarm On YES<

On if Sw1 Off-YES

On If ORP< 630

On If ORP> 770

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0

Off if Sw1 Off-NO

On if Sw2 Off-NO

On If Overfeed YES

On DELAY 00:10:00

MinTime On 00:00:10

MinTimeOff 00:00:10

On If Alarm On NO <

On if Sw1 Off-YES

On If ORP< 630

On If ORP> 770

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0

Off if Sw1 Off-NO

On if Sw2 Off-NO

On If Overfeed YES

On DELAY 00:10:00

MinTime On 00:00:10

MinTimeOff 00:00:10

On If Alarm On YES

On if Sw1 Off-YES <

On If ORP< 630

On If ORP> 770

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0

Off if Sw1 Off-NO

On if Sw2 Off-NO

On If Overfeed YES

On DELAY 00:10:00

MinTime On 00:00:10

MinTimeOff 00:00:10

On If Alarm On YES

On if Sw1 Off-NO <

On If ORP< 630

On If ORP> 770

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0

Off if Sw1 Off-NO

On if Sw2 Off-NO

On If Overfeed YES

On DELAY 00:10:00

MinTime On 00:00:10

MinTimeOff 00:00:10

On If Alarm On YES

On if Sw1 Off-YES

On If ORP< 630<

On If ORP> 770

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0

Off if Sw1 Off-NO

On if Sw2 Off-NO

On If Overfeed YES

On DELAY 00:10:00

MinTime On 00:00:10

MinTimeOff 00:00:10

Pres

s the

[Ente

r] k

ey to

cho

ose

whe

ther

the

alar

m o

ut re

lay

is tu

rned

on w

hen

the

flow

sw

itch

SW1

is o

ff.

Enter new value

Current: 770

770

v-Cancel ^

Use

the

keyp

ad to

ent

er th

e hi

ghO

RP

valu

e ov

er w

hich

the

alar

m o

utre

lay

will

turn

on.

Pres

s the

[Ent

er] k

ey to

con

firm

or

the

dow

n ar

row

key

to c

ance

l.

On If Alarm On YES

On if Sw1 Off-YES

On If ORP< 630

On If ORP> 770<

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0

Off if Sw1 Off-NO

On if Sw2 Off-NO

On If Overfeed YES

On DELAY 00:10:00

MinTime On 00:00:10

MinTimeOff 00:00:10

On If Alarm On YES

On if Sw1 Off-YES

On If ORP< 630

On If ORP> 770

On If pH> 8.00<

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0

Off if Sw1 Off-NO

On if Sw2 Off-NO

On If Overfeed YES

On DELAY 00:10:00

MinTime On 00:00:10

MinTimeOff 00:00:10

Ent

er

Ala

rm O

ut, L

ow p

H S

etpo

int

Enter new value

Current: 7.00

7.00

v-Cancel ^

Use

the

keyp

ad to

ent

er th

e lo

w p

Hva

lue

unde

r whi

ch th

e al

arm

out

rela

y w

ill tu

rn o

n.Pr

ess t

he [E

nter]

key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

Low

pH

Set

poin

t Scr

een

On If Alarm On YES

On if Sw1 Off-YES

On If ORP< 630

On If ORP> 770

On If pH> 8.00

On If pH< 7.00<

On If Temp< 32.0

On If Temp> 104.0

Off if Sw1 Off-NO

On if Sw2 Off-NO

On If Overfeed YES

On DELAY 00:10:00

MinTime On 00:00:10

MinTimeOff 00:00:10

Ent

er

Ala

rm O

ut, L

ow T

empe

ratu

re S

etpo

int

Enter new value

Current: 32.0

32.0

v-Cancel ^

Use

the

keyp

ad to

ent

er th

e lo

wte

mpe

ratu

re v

alue

und

er w

hich

the

alar

m o

ut re

lay

will

turn

on.

Pres

s the

[Ent

er] k

ey to

con

firm

or

the

dow

n ar

row

key

to c

ance

l.

Low

Tem

pera

ture

Set

poin

t Scr

een

On If Alarm On YES

On if Sw1 Off-YES

On If ORP< 630

On If ORP> 770

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0<

On If Temp> 104.0

Off if Sw1 Off-NO

On if Sw2 Off-NO

On If Overfeed YES

On DELAY 00:10:00

MinTime On 00:00:10

MinTimeOff 00:00:10

Bac

k

AK

110

Pro

gram

min

g S

cree

n N

avig

atio

n, A

larm

Out

, Rev

322

Aug

200

8

10.15

87

pH

> 7.67-OFF 7.50s

ORP 490 -OFF 700s

Alarm Out -OFF

69.0f SW1OFFSW2OFF

Mai

n St

atus

Scr

een

Name:Main Pool

System

>Programming

Service

Data ( 8:441 )

Communications

Security Setup

Wizards

Serial # 123456

Con

figur

atio

n M

enu,

Pro

gram

min

g

AK

110

Pro

gram

min

g S

cree

n N

avig

atio

n, A

larm

Out

(1 o

f 2)

Ent

erB

ack

1:pH, Mix Time

2:ORP, Mix Time

>3:Alarm Out

A:Alarm

P:Pager1

P:Pager2

P:Pager3

P:Pager4

Pro

gram

min

g S

etup

Scr

een

Ala

rm O

ut, O

n if

Pan

el A

larm

is O

n

Ent

erB

ack

Ala

rm O

ut, O

n if

SW1

is O

ff

Ala

rm O

ut, L

ow O

RP

Set

poin

t

Ala

rm O

ut, N

ot O

n if

Pan

el A

larm

is O

n

Pres

s the

[Ente

r] k

ey to

cho

ose

whe

ther

the

alar

m o

ut re

lay

is tu

rned

on w

hen

the

AK11

0 fr

ont p

anel

alar

m in

dica

tor i

s on

.

Ent

er

Ala

rm O

ut, N

ot O

n if

SW

1 is

Off

Ent

er

Enter new value

Current: 630

630

v-Cancel ^

Use

the

keyp

ad to

ent

er th

e lo

wO

RP

valu

e un

der w

hich

the

alar

mou

t rel

ay w

ill tu

rn o

n.Pr

ess t

he [E

nter]

key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

Ent

er

Low

OR

P S

etpo

int S

cree

n

Ent

er

Ala

rm O

ut, H

igh

pH S

etpo

int

Enter new value

Current: 8.00

8.00

v-Cancel ^

Use

the

keyp

ad to

ent

er th

e hi

gh p

Hva

lue

over

whi

ch th

e ala

rm o

ut re

lay

will

turn

on.

Pres

s the

[Ent

er] k

ey to

con

firm

or

the

dow

n ar

row

key

to c

ance

l.

Hig

h pH

Set

poin

t Scr

een

Not

e:

The

rela

y 3

prog

ram

min

g m

enu

appe

ars i

n th

is fo

rmat

onl

y w

hen

rela

y 3

has b

een

conf

igur

ed fo

r"A

larm

Out

" con

trol

.

The

optio

ns a

vaila

ble

on th

eAl

arm

Out

Scr

een

prog

ram

min

gm

enu

may

var

y in

acc

orda

nce

with

the

chos

en c

onfig

urat

ions

for

rela

ys 1

and

2.

Ala

rm O

ut, H

igh

OR

P S

etpo

int

Ent

er

Hig

h O

RP

Set

poin

t Scr

een

To

Ala

rm O

ut (2

of 2

)

On If Alarm On YES<

On if Sw1 Off-YES

On If ORP< 630

On If ORP> 770

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0

Off if Sw1 Off-NO

On if Sw2 Off-NO

On If Overfeed YES

On DELAY 00:10:00

MinTime On 00:00:10

MinTimeOff 00:00:10

On If Alarm On NO <

On if Sw1 Off-YES

On If ORP< 630

On If ORP> 770

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0

Off if Sw1 Off-NO

On if Sw2 Off-NO

On If Overfeed YES

On DELAY 00:10:00

MinTime On 00:00:10

MinTimeOff 00:00:10

On If Alarm On YES

On if Sw1 Off-YES <

On If ORP< 630

On If ORP> 770

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0

Off if Sw1 Off-NO

On if Sw2 Off-NO

On If Overfeed YES

On DELAY 00:10:00

MinTime On 00:00:10

MinTimeOff 00:00:10

On If Alarm On YES

On if Sw1 Off-NO <

On If ORP< 630

On If ORP> 770

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0

Off if Sw1 Off-NO

On if Sw2 Off-NO

On If Overfeed YES

On DELAY 00:10:00

MinTime On 00:00:10

MinTimeOff 00:00:10

On If Alarm On YES

On if Sw1 Off-YES

On If ORP< 630<

On If ORP> 770

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0

Off if Sw1 Off-NO

On if Sw2 Off-NO

On If Overfeed YES

On DELAY 00:10:00

MinTime On 00:00:10

MinTimeOff 00:00:10

Pres

s the

[Ente

r] k

ey to

cho

ose

whe

ther

the

alar

m o

ut re

lay

is tu

rned

on w

hen

the

flow

sw

itch

SW1

is o

ff.

Enter new value

Current: 770

770

v-Cancel ^

Use

the

keyp

ad to

ent

er th

e hi

ghO

RP

valu

e ov

er w

hich

the

alar

m o

utre

lay

will

turn

on.

Pres

s the

[Ent

er] k

ey to

con

firm

or

the

dow

n ar

row

key

to c

ance

l.

On If Alarm On YES

On if Sw1 Off-YES

On If ORP< 630

On If ORP> 770<

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0

Off if Sw1 Off-NO

On if Sw2 Off-NO

On If Overfeed YES

On DELAY 00:10:00

MinTime On 00:00:10

MinTimeOff 00:00:10

On If Alarm On YES

On if Sw1 Off-YES

On If ORP< 630

On If ORP> 770

On If pH> 8.00<

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0

Off if Sw1 Off-NO

On if Sw2 Off-NO

On If Overfeed YES

On DELAY 00:10:00

MinTime On 00:00:10

MinTimeOff 00:00:10

Ent

er

Ala

rm O

ut, L

ow p

H S

etpo

int

Enter new value

Current: 7.00

7.00

v-Cancel ^

Use

the

keyp

ad to

ent

er th

e lo

w p

Hva

lue

unde

r whi

ch th

e al

arm

out

rela

y w

ill tu

rn o

n.Pr

ess t

he [E

nter]

key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

Low

pH

Set

poin

t Scr

een

On If Alarm On YES

On if Sw1 Off-YES

On If ORP< 630

On If ORP> 770

On If pH> 8.00

On If pH< 7.00<

On If Temp< 32.0

On If Temp> 104.0

Off if Sw1 Off-NO

On if Sw2 Off-NO

On If Overfeed YES

On DELAY 00:10:00

MinTime On 00:00:10

MinTimeOff 00:00:10

Ent

er

Ala

rm O

ut, L

ow T

empe

ratu

re S

etpo

int

Enter new value

Current: 32.0

32.0

v-Cancel ^

Use

the

keyp

ad to

ent

er th

e lo

wte

mpe

ratu

re v

alue

und

er w

hich

the

alar

m o

ut re

lay

will

turn

on.

Pres

s the

[Ent

er] k

ey to

con

firm

or

the

dow

n ar

row

key

to c

ance

l.

Low

Tem

pera

ture

Set

poin

t Scr

een

On If Alarm On YES

On if Sw1 Off-YES

On If ORP< 630

On If ORP> 770

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0<

On If Temp> 104.0

Off if Sw1 Off-NO

On if Sw2 Off-NO

On If Overfeed YES

On DELAY 00:10:00

MinTime On 00:00:10

MinTimeOff 00:00:10

Bac

k

AK

110

Pro

gram

min

g S

cree

n N

avig

atio

n, A

larm

Out

, Rev

322

Aug

200

8

88

AK

110

Pro

gram

min

g S

cree

n N

avig

atio

n, A

larm

Out

(2 o

f 2)

Use

the

keyp

ad to

ent

er th

e tim

ede

lay

betw

een

the a

larm

trig

ger a

ndtu

rnin

g on

of t

he al

arm

out

rela

y.Pr

ess t

he [E

nter]

key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

Del

ay T

ime

Scr

een

Enter new value

Current: 00:10:00

00:10:00

v-Cancel ^

Ent

er

Ala

rm O

ut, D

elay

Tim

e

F

rom

Ala

rm O

ut (1

of 2

)

On If Alarm On YES

On if Sw1 Off-YES

On If ORP< 630

On If ORP> 770

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0

Off if Sw1 Off-NO

On if Sw2 Off-NO

On If Overfeed YES

On DELAY 00:10:00<

MinTime On 00:00:10

MinTimeOff 00:00:10

Ala

rm O

ut, O

n if

SW2

is O

ff

Ent

er

Ala

rm O

ut, N

ot O

n if

SW

2 is

Off

On If Alarm On YES

On if Sw1 Off-YES

On If ORP< 630

On If ORP> 770

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0

Off if Sw1 Off-NO

On if Sw2 Off-NO <

On If Overfeed YES

On DELAY 00:10:00

MinTime On 00:00:10

MinTimeOff 00:00:10

On If Alarm On YES

On if Sw1 Off-YES

On If ORP< 630

On If ORP> 770

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0

Off if Sw1 Off-NO

On if Sw2 Off-YES <

On If Overfeed YES

On DELAY 00:10:00

MinTime On 00:00:10

MinTimeOff 00:00:10

Pres

s the

[Ente

r] k

ey to

cho

ose

whe

ther

the

alar

m o

ut re

lay

is tu

rned

on w

hen

switc

h 2

(SW

2) is

off

.

Ala

rm O

ut, N

ot O

n if

Ove

rfee

d O

ccur

s

Ent

er

Ala

rm O

ut, O

n if

Ove

rfee

d O

ccur

sOn If Alarm On YES

On if Sw1 Off-YES

On If ORP< 630

On If ORP> 770

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0

Off if Sw1 Off-NO

On if Sw2 Off-NO

On If Overfeed YES<

On DELAY 00:10:00

MinTime On 00:00:10

MinTimeOff 00:00:10

On If Alarm On YES

On if Sw1 Off-YES

On If ORP< 630

On If ORP> 770

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0

Off if Sw1 Off-NO

On if Sw2 Off-NO

On If Overfeed NO<

On DELAY 00:10:00

MinTime On 00:00:10

MinTimeOff 00:00:10

Pres

s the

[Ente

r] k

ey to

cho

ose

whe

ther

the

alar

m o

ut re

lay

is tu

rned

on w

hen

an o

verf

eed

cond

ition

occu

rs.

Ala

rm O

ut, M

inim

um T

ime

On

On If Alarm On YES

On if Sw1 Off-YES

On If ORP< 630

On If ORP> 770

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0

Off if Sw1 Off-NO

On if Sw2 Off-NO

On If Overfeed YES

On DELAY 00:10:00


MinTimeOff 00:00:10

Use

the

keyp

ad to

ent

er th

e am

ount

of ti

me

the

alar

m ou

t will

be

held

on

once

an

alar

m c

ondi

tion

occu

rs.

Pres

s the

[Ent

er] k

ey to

con

firm

or

the

dow

n ar

row

key

to c

ance

l.

Min

imum

Tim

e O

n S

cree

nEnter new value

Current: 00:00:10

00:00:10

v-Cancel ^

Ent

er

Ala

rm O

ut, M

inim

um T

ime

Off

On If Alarm On YES

On if Sw1 Off-YES

On If ORP< 630

On If ORP> 770

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0

Off if Sw1 Off-NO

On if Sw2 Off-NO

On If Overfeed YES

On DELAY 00:10:00

MinTime On 00:00:10


Use

the

keyp

ad to

ent

er th

e am

ount

of ti

me

the

alar

m ou

t will

be

held

off o

nce

an a

larm

con

ditio

n is

fixe

d.Pr

ess t

he [E

nter]

key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

Min

imum

Tim

e O

ff S

cree

nEnter new value

Current: 00:00:10

00:00:10

v-Cancel ^

Ent

er

Ent

er

Ala

rm O

ut, H

igh

Tem

pera

ture

Set

poin

tEnter new value

Current: 104.0

104.0

v-Cancel ^

Use

the

keyp

ad to

ent

er th

e hi

ghte

mpe

ratu

re v

alue

ove

r whi

ch th

eal

arm

out

rela

y w

ill tu

rn o

n.Pr

ess t

he [E

nter]

key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

Hig

h Te

mpe

ratu

re S

etpo

int S

cree

nOn If Alarm On YES

On if Sw1 Off-YES

On If ORP< 630

On If ORP> 770

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0<

Off if Sw1 Off-NO

On if Sw2 Off-NO

On If Overfeed YES

On DELAY 00:10:00

MinTime On 00:00:10

MinTimeOff 00:00:10

Ala

rm O

ut, O

ff if

SW

1 is

Off

Ent

er

Ala

rm O

ut, N

ot O

ff if

SW

1 is

Off

On If Alarm On YES

On if Sw1 Off-YES

On If ORP< 630

On If ORP> 770

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0

Off if Sw1 Off-NO <

On if Sw2 Off-NO

On If Overfeed YES

On DELAY 00:10:00

MinTime On 00:00:10

MinTimeOff 00:00:10

On If Alarm On YES

On if Sw1 Off-YES

On If ORP< 630

On If ORP> 770

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0


On if Sw2 Off-NO

On If Overfeed YES

On DELAY 00:10:00

MinTime On 00:00:10

MinTimeOff 00:00:10

Pres

s the

[Ente

r] k

ey to

cho

ose

whe

ther

the

alar

m o

ut re

lay

is tu

rned

off w

hen

the fl

ow s

witc

h SW

1 is

off.

AK

110

Pro

gram

min

g S

cree

n N

avig

atio

n, A

larm

Out

, Rev

322

Aug

200

8

89

AK

110

Pro

gram

min

g S

cree

n N

avig

atio

n, A

larm

Out

(2 o

f 2)

Use

the

keyp

ad to

ent

er th

e tim

ede

lay

betw

een

the a

larm

trig

ger a

ndtu

rnin

g on

of t

he al

arm

out

rela

y.Pr

ess t

he [E

nter]

key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

Del

ay T

ime

Scr

een

Enter new value

Current: 00:10:00

00:10:00

v-Cancel ^

Ent

er

Ala

rm O

ut, D

elay

Tim

e

F

rom

Ala

rm O

ut (1

of 2

)

On If Alarm On YES

On if Sw1 Off-YES

On If ORP< 630

On If ORP> 770

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0

Off if Sw1 Off-NO

On if Sw2 Off-NO

On If Overfeed YES

On DELAY 00:10:00<

MinTime On 00:00:10

MinTimeOff 00:00:10

Ala

rm O

ut, O

n if

SW2

is O

ff

Ent

er

Ala

rm O

ut, N

ot O

n if

SW

2 is

Off

On If Alarm On YES

On if Sw1 Off-YES

On If ORP< 630

On If ORP> 770

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0

Off if Sw1 Off-NO

On if Sw2 Off-NO <

On If Overfeed YES

On DELAY 00:10:00

MinTime On 00:00:10

MinTimeOff 00:00:10

On If Alarm On YES

On if Sw1 Off-YES

On If ORP< 630

On If ORP> 770

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0

Off if Sw1 Off-NO

On if Sw2 Off-YES <

On If Overfeed YES

On DELAY 00:10:00

MinTime On 00:00:10

MinTimeOff 00:00:10

Pres

s the

[Ente

r] k

ey to

cho

ose

whe

ther

the

alar

m o

ut re

lay

is tu

rned

on w

hen

switc

h 2

(SW

2) is

off

.

Ala

rm O

ut, N

ot O

n if

Ove

rfee

d O

ccur

s

Ent

er

Ala

rm O

ut, O

n if

Ove

rfee

d O

ccur

sOn If Alarm On YES

On if Sw1 Off-YES

On If ORP< 630

On If ORP> 770

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0

Off if Sw1 Off-NO

On if Sw2 Off-NO

On If Overfeed YES<

On DELAY 00:10:00

MinTime On 00:00:10

MinTimeOff 00:00:10

On If Alarm On YES

On if Sw1 Off-YES

On If ORP< 630

On If ORP> 770

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0

Off if Sw1 Off-NO

On if Sw2 Off-NO

On If Overfeed NO<

On DELAY 00:10:00

MinTime On 00:00:10

MinTimeOff 00:00:10

Pres

s the

[Ente

r] k

ey to

cho

ose

whe

ther

the

alar

m o

ut re

lay

is tu

rned

on w

hen

an o

verf

eed

cond

ition

occu

rs.

Ala

rm O

ut, M

inim

um T

ime

On

On If Alarm On YES

On if Sw1 Off-YES

On If ORP< 630

On If ORP> 770

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0

Off if Sw1 Off-NO

On if Sw2 Off-NO

On If Overfeed YES

On DELAY 00:10:00


MinTimeOff 00:00:10

Use

the

keyp

ad to

ent

er th

e am

ount

of ti

me

the

alar

m ou

t will

be

held

on

once

an

alar

m c

ondi

tion

occu

rs.

Pres

s the

[Ent

er] k

ey to

con

firm

or

the

dow

n ar

row

key

to c

ance

l.

Min

imum

Tim

e O

n S

cree

nEnter new value

Current: 00:00:10

00:00:10

v-Cancel ^

Ent

er

Ala

rm O

ut, M

inim

um T

ime

Off

On If Alarm On YES

On if Sw1 Off-YES

On If ORP< 630

On If ORP> 770

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0

Off if Sw1 Off-NO

On if Sw2 Off-NO

On If Overfeed YES

On DELAY 00:10:00

MinTime On 00:00:10


Use

the

keyp

ad to

ent

er th

e am

ount

of ti

me

the

alar

m ou

t will

be

held

off o

nce

an a

larm

con

ditio

n is

fixe

d.Pr

ess t

he [E

nter]

key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

Min

imum

Tim

e O

ff S

cree

nEnter new value

Current: 00:00:10

00:00:10

v-Cancel ^

Ent

er

Ent

er

Ala

rm O

ut, H

igh

Tem

pera

ture

Set

poin

tEnter new value

Current: 104.0

104.0

v-Cancel ^

Use

the

keyp

ad to

ent

er th

e hi

ghte

mpe

ratu

re v

alue

ove

r whi

ch th

eal

arm

out

rela

y w

ill tu

rn o

n.Pr

ess t

he [E

nter]

key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

Hig

h Te

mpe

ratu

re S

etpo

int S

cree

nOn If Alarm On YES

On if Sw1 Off-YES

On If ORP< 630

On If ORP> 770

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0<

Off if Sw1 Off-NO

On if Sw2 Off-NO

On If Overfeed YES

On DELAY 00:10:00

MinTime On 00:00:10

MinTimeOff 00:00:10

Ala

rm O

ut, O

ff if

SW

1 is

Off

Ent

er

Ala

rm O

ut, N

ot O

ff if

SW

1 is

Off

On If Alarm On YES

On if Sw1 Off-YES

On If ORP< 630

On If ORP> 770

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0

Off if Sw1 Off-NO <

On if Sw2 Off-NO

On If Overfeed YES

On DELAY 00:10:00

MinTime On 00:00:10

MinTimeOff 00:00:10

On If Alarm On YES

On if Sw1 Off-YES

On If ORP< 630

On If ORP> 770

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0


On if Sw2 Off-NO

On If Overfeed YES

On DELAY 00:10:00

MinTime On 00:00:10

MinTimeOff 00:00:10

Pres

s the

[Ente

r] k

ey to

cho

ose

whe

ther

the

alar

m o

ut re

lay

is tu

rned

off w

hen

the fl

ow s

witc

h SW

1 is

off.

AK

110

Pro

gram

min

g S

cree

n N

avig

atio

n, A

larm

Out

, Rev

322

Aug

200

8

90

10.16

pH

> 7.67-OFF 7.50s

ORP 490 -OFF 700s

Aux:MakeUp-OFF

SW1OFFSW2OFF

Mai

n St

atus

Scr

een

Name:Main Pool

System

>Programming

Service

Data ( 8:441 )

Communications

Security Setup

Wizards

Serial # 123456

Con

figur

atio

n M

enu,

Pro

gram

min

g

AK

110

Pro

gram

min

g S

cree

n N

avig

atio

n, A

ux: M

ake-

Up

(Aut

o Fi

ll)

Ent

erB

ack

1:pH, Mix Time

2:ORP, Mix Time

>3:Aux:MakeUp

A:Alarm

P:Pager1

P:Pager2

P:Pager3

P:Pager4

Pro

gram

min

g S

etup

Scr

een

Aux

:Mak

eUp,

Man

ual C

ycle

Tim

e

Ent

erB

ack

Enter new value

Current: 00:02:00

00:02:00

v-Cancel ^

Man

ual C

ycle

Tim

e S

cree

n

Use

the

keyp

ad to

ent

er th

e m

anua

lm

ake-

up re

lay

on-ti

me

dura

tion.

Pres

s the

[Ent

er] k

ey to

con

firm

or

the

dow

n ar

row

key

to c

ance

l.

Ent

er

Ent

er

Ent

er

Aux

:Mak

eUp,

Ove

rfee

d

Pres

s the

[Ent

er] k

ey to

mak

e th

em

ake-

up re

lay

oper

atio

n de

pend

ent

upon

whe

ther

switc

h 2

(SW

2) is

on

or n

ot.

Not

e:

The

rela

y 3

prog

ram

min

g m

enu

appe

ars i

n th

is fo

rmat

onl

y w

hen

rela

y 3

has b

een

conf

igur

ed fo

r"A

ux:M

akeU

p" c

ontr

ol.

Aux

:Mak

eUp,

Not

On i

f SW

2 is

Off

Ent

er

Aux

:Mak

eUp,

Min

imum

Tim

e O

n

Aux

:Mak

eUp,

Min

imum

Tim

e O

ff

Enter new value

Current: 00:00:30

00:00:30

v-Cancel ^

Use

the

keyp

ad to

ent

er th

e tim

ede

lay

betw

een

the s

etpo

int t

rigg

eran

d th

e m

ake-

up re

lay

star

t.Pr

ess t

he [E

nter]

key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

On

Del

ay S

cree

n

Aux

:Mak

eUp,

On

if SW

2 is

Off


On if Sw2 Off-No

On if Sw2 On -YES

On DELAY 00:00:30

MinTime On 00:02:00

MinTimeOff 00:05:00

Overfeed 01:00:00

ManualTime 00:02:00

On if Sw2 Off-NO <

On if Sw2 On -YES

On DELAY 00:00:30

MinTime On 00:02:00

MinTimeOff 00:05:00

Overfeed 01:00:00

Aux

:Mak

eUp,

On

if S

W2

is O

nA

ux:M

akeU

p, N

ot O

n if

SW

2 is

On

Ent

er

Aux

:Mak

eUp,

On

Del

ay

Ent

er

Enter new value

Current: 00:02:00

00:02:00

v-Cancel ^

Use

the

keyp

ad to

ent

er th

em

inim

um a

mou

nt o

f tim

e th

e m

ake-

up re

lay

will

be tu

rned

on.

Pres

s the

[Ent

er] k

ey to

con

firm

or

the

dow

n ar

row

key

to c

ance

l.

Min

imum

Tim

e O

n S

cree

n

Ent

er

Enter new value

Current: 00:05:00

00:05:00

v-Cancel ^

Min

imum

Tim

e O

ff S

cree

n

Use

the

keyp

ad to

ent

er th

e am

ount

of ti

me

the

relay

will

be

held

off

befo

re it

is a

llow

ed to

turn

on

agai

n.Pr

ess t

he [E

nter]

key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

Enter new value

Current: 01:00:00

01:00:00

v-Cancel ^

Ove

rfeed

Scr

een

Use

the

keyp

ad to

ent

er th

e da

ilym

axim

um a

ccum

ulat

ed m

ake-

upre

lay

on-ti

me.

Pres

s the

[Ent

er] k

ey to

con

firm

or

the

dow

n ar

row

key

to c

ance

l.

ManualTime 00:02:00

On if Sw2 Off-YES <

On if Sw2 On -YES

On DELAY 00:00:30

MinTime On 00:02:00

MinTimeOff 00:05:00

Overfeed 01:00:00

ManualTime 00:02:00

On if Sw2 Off-NO

On if Sw2 On -YES <

On DELAY 00:00:30

MinTime On 00:02:00

MinTimeOff 00:05:00

Overfeed 01:00:00

ManualTime 00:02:00

On if Sw2 Off-NO

On if Sw2 On -NO <

On DELAY 00:00:30

MinTime On 00:02:00

MinTimeOff 00:05:00

Overfeed 01:00:00

ManualTime 00:02:00

On if Sw2 Off-NO

On if Sw2 On -YES

On DELAY 00:00:30<

MinTime On 00:02:00

MinTimeOff 00:05:00

Overfeed 01:00:00

ManualTime 00:02:00

On if Sw2 Off-NO

On if Sw2 On -YES

On DELAY 00:00:30


MinTimeOff 00:05:00

Overfeed 01:00:00

Pres

s the

[Ent

er] k

ey to

mak

e th

em

ake-

up re

lay

oper

atio

n de

pend

ent

upon

whe

ther

switc

h 2

(SW

2) is

off

or n

ot.

ManualTime 00:02:00

On if Sw2 Off-NO

On if Sw2 On -YES

On DELAY 00:00:30

MinTime On 00:02:00


Overfeed 01:00:00

ManualTime 00:02:00

On if Sw2 Off-NO

On if Sw2 On -YES

On DELAY 00:00:30

MinTime On 00:02:00

MinTimeOff 00:05:00

Overfeed 01:00:00<

Bac

k

AK

110

Pro

gram

min

g S

cree

n N

avig

atio

n, A

ux:M

akeU

p, R

ev 3

22 A

ug 2

008

91

pH

> 7.67-OFF 7.50s

ORP 490 -OFF 700s

Aux:MakeUp-OFF

SW1OFFSW2OFF

Mai

n St

atus

Scr

een

Name:Main Pool

System

>Programming

Service

Data ( 8:441 )

Communications

Security Setup

Wizards

Serial # 123456

Con

figur

atio

n M

enu,

Pro

gram

min

g

AK

110

Pro

gram

min

g S

cree

n N

avig

atio

n, A

ux: M

ake-

Up

(Aut

o Fi

ll)

Ent

erB

ack

1:pH, Mix Time

2:ORP, Mix Time

>3:Aux:MakeUp

A:Alarm

P:Pager1

P:Pager2

P:Pager3

P:Pager4

Pro

gram

min

g S

etup

Scr

een

Aux

:Mak

eUp,

Man

ual C

ycle

Tim

e

Ent

erB

ack

Enter new value

Current: 00:02:00

00:02:00

v-Cancel ^

Man

ual C

ycle

Tim

e S

cree

n

Use

the

keyp

ad to

ent

er th

e m

anua

lm

ake-

up re

lay

on-ti

me

dura

tion.

Pres

s the

[Ent

er] k

ey to

con

firm

or

the

dow

n ar

row

key

to c

ance

l.

Ent

er

Ent

er

Ent

er

Aux

:Mak

eUp,

Ove

rfee

d

Pres

s the

[Ent

er] k

ey to

mak

e th

em

ake-

up re

lay

oper

atio

n de

pend

ent

upon

whe

ther

switc

h 2

(SW

2) is

on

or n

ot.

Not

e:

The

rela

y 3

prog

ram

min

g m

enu

appe

ars i

n th

is fo

rmat

onl

y w

hen

rela

y 3

has b

een

conf

igur

ed fo

r"A

ux:M

akeU

p" c

ontr

ol.

Aux

:Mak

eUp,

Not

On i

f SW

2 is

Off

Ent

er

Aux

:Mak

eUp,

Min

imum

Tim

e O

n

Aux

:Mak

eUp,

Min

imum

Tim

e O

ff

Enter new value

Current: 00:00:30

00:00:30

v-Cancel ^

Use

the

keyp

ad to

ent

er th

e tim

ede

lay

betw

een

the s

etpo

int t

rigg

eran

d th

e m

ake-

up re

lay

star

t.Pr

ess t

he [E

nter]

key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

On

Del

ay S

cree

n

Aux

:Mak

eUp,

On

if SW

2 is

Off


On if Sw2 Off-No

On if Sw2 On -YES

On DELAY 00:00:30

MinTime On 00:02:00

MinTimeOff 00:05:00

Overfeed 01:00:00

ManualTime 00:02:00

On if Sw2 Off-NO <

On if Sw2 On -YES

On DELAY 00:00:30

MinTime On 00:02:00

MinTimeOff 00:05:00

Overfeed 01:00:00

Aux

:Mak

eUp,

On

if S

W2

is O

nA

ux:M

akeU

p, N

ot O

n if

SW

2 is

On

Ent

er

Aux

:Mak

eUp,

On

Del

ay

Ent

er

Enter new value

Current: 00:02:00

00:02:00

v-Cancel ^

Use

the

keyp

ad to

ent

er th

em

inim

um a

mou

nt o

f tim

e th

e m

ake-

up re

lay

will

be tu

rned

on.

Pres

s the

[Ent

er] k

ey to

con

firm

or

the

dow

n ar

row

key

to c

ance

l.

Min

imum

Tim

e O

n S

cree

n

Ent

er

Enter new value

Current: 00:05:00

00:05:00

v-Cancel ^

Min

imum

Tim

e O

ff S

cree

n

Use

the

keyp

ad to

ent

er th

e am

ount

of ti

me

the

relay

will

be

held

off

befo

re it

is a

llow

ed to

turn

on

agai

n.Pr

ess t

he [E

nter]

key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

Enter new value

Current: 01:00:00

01:00:00

v-Cancel ^

Ove

rfeed

Scr

een

Use

the

keyp

ad to

ent

er th

e da

ilym

axim

um a

ccum

ulat

ed m

ake-

upre

lay

on-ti

me.

Pres

s the

[Ent

er] k

ey to

con

firm

or

the

dow

n ar

row

key

to c

ance

l.

ManualTime 00:02:00

On if Sw2 Off-YES <

On if Sw2 On -YES

On DELAY 00:00:30

MinTime On 00:02:00

MinTimeOff 00:05:00

Overfeed 01:00:00

ManualTime 00:02:00

On if Sw2 Off-NO

On if Sw2 On -YES <

On DELAY 00:00:30

MinTime On 00:02:00

MinTimeOff 00:05:00

Overfeed 01:00:00

ManualTime 00:02:00

On if Sw2 Off-NO

On if Sw2 On -NO <

On DELAY 00:00:30

MinTime On 00:02:00

MinTimeOff 00:05:00

Overfeed 01:00:00

ManualTime 00:02:00

On if Sw2 Off-NO

On if Sw2 On -YES

On DELAY 00:00:30<

MinTime On 00:02:00

MinTimeOff 00:05:00

Overfeed 01:00:00

ManualTime 00:02:00

On if Sw2 Off-NO

On if Sw2 On -YES

On DELAY 00:00:30


MinTimeOff 00:05:00

Overfeed 01:00:00

Pres

s the

[Ent

er] k

ey to

mak

e th

em

ake-

up re

lay

oper

atio

n de

pend

ent

upon

whe

ther

switc

h 2

(SW

2) is

off

or n

ot.

ManualTime 00:02:00

On if Sw2 Off-NO

On if Sw2 On -YES

On DELAY 00:00:30

MinTime On 00:02:00


Overfeed 01:00:00

ManualTime 00:02:00

On if Sw2 Off-NO

On if Sw2 On -YES

On DELAY 00:00:30

MinTime On 00:02:00

MinTimeOff 00:05:00

Overfeed 01:00:00<

Bac

k

AK

110

Pro

gram

min

g S

cree

n N

avig

atio

n, A

ux:M

akeU

p, R

ev 3

22 A

ug 2

008

92

pH

> 7.67-OFF 7.50s

ORP 490 -OFF 700

Daily -OFF

69.0f SW1OFFSW2OFF

Mai

n St

atus

Scr

een

Name:Main Pool

System

>Programming

Service

Data ( 8:441 )

Communications

Security Setup

Wizards

Serial # 123456

Con

figur

atio

n M

enu,

Pro

gram

min

g

AK

110

Pro

gram

min

g S

cree

n N

avig

atio

n, D

aily

Eve

nt

Ent

erB

ack

1:pH, Mix Time

2:ORP, Mix Time

>3:Daily

A:Alarm

P:Pager1

P:Pager2

P:Pager3

P:Pager4

Pro

gram

min

g S

etup

Scr

een

Dai

ly E

vent

, Man

ual C

ycle

Tim

e

Ent

erB

ack

Enter new value

Current: 00:02:00

00:02:00

v-Cancel ^

Man

ual C

ycle

Tim

e S

cree

n

Use

the

keyp

ad to

ent

er th

e m

anua

lre

lay

on-ti

me d

urat

ion.

Pres

s the

[Ent

er] k

ey to

con

firm

or

the

dow

n ar

row

key

to c

ance

l.

Ent

er

Ent

er

Ent

er

Pres

s the

[Ent

er] k

ey to

mak

e th

ere

lay

oper

atio

n de

pend

ent o

rin

depe

nden

t of t

he s

tatu

s of

sw

itch

2(S

W2.

)

Not

e:

The

rela

y 3

prog

ram

min

g m

enu

appe

ars i

n th

is fo

rmat

onl

y w

hen

rela

y 3

has b

een

conf

igur

ed fo

r"D

aily

" co

ntro

l.

Dai

ly E

vent

, Off

if T

ime

is A

fter

Ent

er

Dai

ly E

vent,

Min

imum

Tim

e O

ff

Dai

ly E

vent

, Rel

ay O

n if

SW

2 is

On

Enter new value

Current: 00:02:00

00:02:00

v-Cancel ^

Use

the

keyp

ad to

ent

er th

em

axim

um re

lay

on-ti

me

dura

tion.

Pres

s the

[Ent

er] k

ey to

con

firm

or

the

dow

n ar

row

key

to c

ance

l.

Use

the

keyp

ad to

ent

er th

e tim

eaf

ter w

hich

the

relay

will

turn

off

.Pr

ess t

he [E

nter]

key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

On

Cal

cula

ted

Tim

e S

cree

n

Off

if Ti

me

is A

fter

Scr

een

Dai

ly E

vent

, Off

if T

ime

is B

efor

eO

ff if

Tim

e is

Bef

ore

Scr

een

Ent

er

Dai

ly E

vent

, On

Cal

cula

ted

Tim

e

Ent

er

Enter new value

Current: 00:05:00

00:05:00

v-Cancel ^

Min

imum

Tim

e O

ff S

cree

n

Dai

ly E

vent,

Inde

pend

ent o

f SW

2

Use

the

keyp

ad to

ent

er th

e am

ount

of ti

me

the

relay

will

be

held

off

befo

re it

is a

llow

ed to

turn

on

agai

n.Pr

ess t

he [E

nter]

key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.


** ON **

OffIfTime> 01:01:02

OffIfTime< 01:01:00

OnCTime 00:02:00

MinTimeOff 00:05:00

On if Sw2 On -YES

Off if Sw1 Off-YES

ManualTime 00:02:00

** ON **


OffIfTime< 01:01:00

OnCTime 00:02:00

MinTimeOff 00:05:00

On if Sw2 On -YES

Off if Sw1 Off-YES

ManualTime 00:02:00

** ON **

OffIfTime> 01:01:02

OffIfTime< 01:01:00<

OnCTime 00:02:00

MinTimeOff 00:05:00

On if Sw2 On -YES

Off if Sw1 Off-YES

ManualTime 00:02:00

** ON **

OffIfTime> 01:01:02

OffIfTime< 01:01:00

OnCTime 00:02:00<

MinTimeOff 00:05:00

On if Sw2 On -YES

Off if Sw1 Off-YES

ManualTime 00:02:00

** ON **

OffIfTime> 01:01:02

OffIfTime< 01:01:00

OnCTime 00:02:00


On if Sw2 On -YES

Off if Sw1 Off-YES

ManualTime 00:02:00

** ON **

OffIfTime> 01:01:02

OffIfTime< 01:01:00

OnCTime 00:02:00

MinTimeOff 00:05:00

On if Sw2 On –YES <

Off if Sw1 Off-YES

ManualTime 00:02:00

** ON **

OffIfTime> 01:01:02

OffIfTime< 01:01:00

OnCTime 00:02:00

MinTimeOff 00:05:00

On if Sw2 On –NO <

Off if Sw1 Off-YES

Enter new value

Current: 01:01:00

01:01:00

v-Cancel ^

Enter new value

Current: 01:01:02

01:01:02

v-Cancel ^

Use

the

keyp

ad to

ent

er th

e tim

ebe

fore

whi

ch th

e rel

ay w

ill tu

rn o

ff.

Pres

s the

[Ent

er] k

ey to

con

firm

or

the

dow

n ar

row

key

to c

ance

l.

Bac

k

Ent

er

Pres

s the

[Ent

er] k

ey to

mak

e th

ere

lay

oper

atio

n de

pend

ent o

rin

depe

nden

t of t

he s

tatu

s of

the

flow

switc

h SW

1.

Dai

ly E

vent

, Rel

ay O

ff if

SW

1 is

Off

Dai

ly E

vent,

Inde

pend

ent o

f SW


** ON **

OffIfTime> 01:01:02

OffIfTime< 01:01:00

OnCTime 00:02:00

MinTimeOff 00:05:00

On if Sw2 On -YES


ManualTime 00:02:00

** ON **

OffIfTime> 01:01:02

OffIfTime< 01:01:00

OnCTime 00:02:00

MinTimeOff 00:05:00

On if Sw2 On -YES

Off if Sw1 Off-NO <

AK

110

Pro

gram

min

g S

cree

n N

avig

atio

n, D

aily

Eve

nt, R

ev 3

22 A

ug 2

008

10.17

93

pH

> 7.67-OFF 7.50s

ORP 490 -OFF 700

Daily -OFF

69.0f SW1OFFSW2OFF

Mai

n St

atus

Scr

een

Name:Main Pool

System

>Programming

Service

Data ( 8:441 )

Communications

Security Setup

Wizards

Serial # 123456

Con

figur

atio

n M

enu,

Pro

gram

min

g

AK

110

Pro

gram

min

g S

cree

n N

avig

atio

n, D

aily

Eve

nt

Ent

erB

ack

1:pH, Mix Time

2:ORP, Mix Time

>3:Daily

A:Alarm

P:Pager1

P:Pager2

P:Pager3

P:Pager4

Pro

gram

min

g S

etup

Scr

een

Dai

ly E

vent

, Man

ual C

ycle

Tim

e

Ent

erB

ack

Enter new value

Current: 00:02:00

00:02:00

v-Cancel ^

Man

ual C

ycle

Tim

e S

cree

n

Use

the

keyp

ad to

ent

er th

e m

anua

lre

lay

on-ti

me d

urat

ion.

Pres

s the

[Ent

er] k

ey to

con

firm

or

the

dow

n ar

row

key

to c

ance

l.

Ent

er

Ent

er

Ent

er

Pres

s the

[Ent

er] k

ey to

mak

e th

ere

lay

oper

atio

n de

pend

ent o

rin

depe

nden

t of t

he s

tatu

s of

sw

itch

2(S

W2.

)

Not

e:

The

rela

y 3

prog

ram

min

g m

enu

appe

ars i

n th

is fo

rmat

onl

y w

hen

rela

y 3

has b

een

conf

igur

ed fo

r"D

aily

" co

ntro

l.

Dai

ly E

vent

, Off

if T

ime

is A

fter

Ent

er

Dai

ly E

vent,

Min

imum

Tim

e O

ff

Dai

ly E

vent

, Rel

ay O

n if

SW

2 is

On

Enter new value

Current: 00:02:00

00:02:00

v-Cancel ^

Use

the

keyp

ad to

ent

er th

em

axim

um re

lay

on-ti

me

dura

tion.

Pres

s the

[Ent

er] k

ey to

con

firm

or

the

dow

n ar

row

key

to c

ance

l.

Use

the

keyp

ad to

ent

er th

e tim

eaf

ter w

hich

the

relay

will

turn

off

.Pr

ess t

he [E

nter]

key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

On

Cal

cula

ted

Tim

e S

cree

n

Off

if Ti

me

is A

fter

Scr

een

Dai

ly E

vent

, Off

if T

ime

is B

efor

eO

ff if

Tim

e is

Bef

ore

Scr

een

Ent

er

Dai

ly E

vent

, On

Cal

cula

ted

Tim

e

Ent

er

Enter new value

Current: 00:05:00

00:05:00

v-Cancel ^

Min

imum

Tim

e O

ff S

cree

n

Dai

ly E

vent,

Inde

pend

ent o

f SW

2

Use

the

keyp

ad to

ent

er th

e am

ount

of ti

me

the

relay

will

be

held

off

befo

re it

is a

llow

ed to

turn

on

agai

n.Pr

ess t

he [E

nter]

key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.


** ON **

OffIfTime> 01:01:02

OffIfTime< 01:01:00

OnCTime 00:02:00

MinTimeOff 00:05:00

On if Sw2 On -YES

Off if Sw1 Off-YES

ManualTime 00:02:00

** ON **


OffIfTime< 01:01:00

OnCTime 00:02:00

MinTimeOff 00:05:00

On if Sw2 On -YES

Off if Sw1 Off-YES

ManualTime 00:02:00

** ON **

OffIfTime> 01:01:02


OnCTime 00:02:00

MinTimeOff 00:05:00

On if Sw2 On -YES

Off if Sw1 Off-YES

ManualTime 00:02:00

** ON **

OffIfTime> 01:01:02

OffIfTime< 01:01:00

OnCTime 00:02:00<

MinTimeOff 00:05:00

On if Sw2 On -YES

Off if Sw1 Off-YES

ManualTime 00:02:00

** ON **

OffIfTime> 01:01:02

OffIfTime< 01:01:00

OnCTime 00:02:00


On if Sw2 On -YES

Off if Sw1 Off-YES

ManualTime 00:02:00

** ON **

OffIfTime> 01:01:02

OffIfTime< 01:01:00

OnCTime 00:02:00

MinTimeOff 00:05:00


Off if Sw1 Off-YES

ManualTime 00:02:00

** ON **

OffIfTime> 01:01:02

OffIfTime< 01:01:00

OnCTime 00:02:00

MinTimeOff 00:05:00


Off if Sw1 Off-YES

Enter new value

Current: 01:01:00

01:01:00

v-Cancel ^

Enter new value

Current: 01:01:02

01:01:02

v-Cancel ^

Use

the

keyp

ad to

ent

er th

e tim

ebe

fore

whi

ch th

e rel

ay w

ill tu

rn o

ff.

Pres

s the

[Ent

er] k

ey to

con

firm

or

the

dow

n ar

row

key

to c

ance

l.

Bac

k

Ent

er

Pres

s the

[Ent

er] k

ey to

mak

e th

ere

lay

oper

atio

n de

pend

ent o

rin

depe

nden

t of t

he s

tatu

s of

the

flow

switc

h SW

1.

Dai

ly E

vent

, Rel

ay O

ff if

SW

1 is

Off

Dai

ly E

vent,

Inde

pend

ent o

f SW


** ON **

OffIfTime> 01:01:02

OffIfTime< 01:01:00

OnCTime 00:02:00

MinTimeOff 00:05:00

On if Sw2 On -YES


ManualTime 00:02:00

** ON **

OffIfTime> 01:01:02

OffIfTime< 01:01:00

OnCTime 00:02:00

MinTimeOff 00:05:00

On if Sw2 On -YES

Off if Sw1 Off-NO <

AK

110

Pro

gram

min

g S

cree

n N

avig

atio

n, D

aily

Eve

nt, R

ev 3

22 A

ug 2

008

94

10.18

pH

> 7.67-OFF 7.50s

ORP 490 -OFF 700s

Weekly -OFF

69.0f SW1OFFSW2OFF

Mai

n S

tatu

s S

cree

n Name:Main Pool

System

>Programming

Service

Data ( 8:441 )

Communications

Security Setup

Wizards

Serial # 123456

Con

figur

atio

n M

enu,

Pro

gram

min

g

AK

110

Pro

gram

min

g S

cree

n N

avig

atio

n, W

eekl

y Ev

ents

Ent

erB

ack

1:pH, Mix Time

2:ORP, Mix Time

>3:Weekly

A:Alarm

P:Pager1

P:Pager2

P:Pager3

P:Pager4

Pro

gram

ming

Set

up S

cree

n

Wee

kly

Eve

nts,

Man

ual C

ycle

Tim

e

Ent

erB

ack

Enter new value

Current: 00:02:00

00:02:00

v-Cancel ^

Man

ual C

ycle

Tim

e S

cree

n

Use

the

keyp

ad to

ente

r the

man

ual

rela

y on

-tim

e dur

atio

n.Pr

ess t

he [E

nter

] key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

Ent

er

Ent

er

Ent

er

Pres

s the

[Ent

er] k

ey to

mak

e th

ere

lay

oper

atio

n de

pend

ent o

rin

depe

nden

t of th

e st

atus

of s

witc

h 2

(SW

2.)

Not

e:

The

rela

y 3

prog

ram

min

g m

enu

appe

ars i

n th

is fo

rmat

onl

y w

hen

rela

y 3

has b

een c

onfig

ured

for

"Wee

kly"

cont

rol.

Wee

kly

Eve

nts,

Off

if Ti

me

is A

fter

Ent

er

Wee

kly

Eve

nts,

Rel

ay O

n if S

W2

is O

n

Enter new value

Current: 00:02:00

00:02:00

v-Cancel ^

Use

the

keyp

ad to

ent

er th

em

axim

um re

lay

on-ti

me d

urat

ion.

Pres

s the

[Ent

er] k

ey to

con

firm

or

the

dow

n ar

row

key

to c

ance

l.

Use

the

keyp

ad to

ent

er th

e tim

eaf

ter w

hich

the

relay

will

turn

off

.Pr

ess t

he [E

nter

] key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

On

Cal

cula

ted

Tim

e S

cree

n

Off

if Ti

me

is A

fter S

cree

n

Wee

kly

Eve

nts,

Off

if T

ime

is B

efor

eO

ff if

Tim

e is

Bef

ore

Scr

een

Ent

er

Wee

kly

Eve

nts,

On

Cal

cula

ted

Tim

e

Wee

kly

Eve

nts,

Inde

pend

ent o

f SW

2ManualTime 00:02:00<

WKday On sMtWtFs

OffIfTime> 01:01:02

OffIfTime< 01:01:00

OnCTime 00:02:00

MinTimeOff 00:05:00

On if Sw2 On –YES

Off if Sw1 Off-YES

ManualTime 00:02:00

WKday On sMtWtFs


OffIfTime< 01:01:00

OnCTime 00:02:00

MinTimeOff 00:05:00

On if Sw2 On –YES

Off if Sw1 Off-YES

ManualTime 00:02:00

WKday On sMtWtFs

OffIfTime> 01:01:02


OnCTime 00:02:00

MinTimeOff 00:05:00

On if Sw2 On –YES

Off if Sw1 Off-YES

ManualTime 00:02:00

WKday On sMtWtFs

OffIfTime> 01:01:02

OffIfTime< 01:01:00

OnCTime 00:02:00<

MinTimeOff 00:05:00

On if Sw2 On –YES

Off if Sw1 Off-YES

ManualTime 00:02:00

WKday On sMtWtFs

OffIfTime> 01:01:02

OffIfTime< 01:01:00

OnCTime 00:02:00

MinTimeOff 00:05:00

On if Sw2 On -YES <

Off if Sw1 Off-YES

ManualTime 00:02:00

WKday On sMtWtFs

OffIfTime> 01:01:02

OffIfTime< 01:01:00

OnCTime 00:02:00

MinTimeOff 00:05:00


Off if Sw1 Off-YES

Enter new value

Current: 01:01:00

01:01:00

v-Cancel ^

Enter new value

Current: 01:01:02

01:01:02

v-Cancel ^

Use

the

keyp

ad to

ent

er th

e tim

ebe

fore

whi

ch th

e rel

ay w

ill tu

rn o

ff.

Pres

s the

[Ent

er] k

ey to

con

firm

or

the

dow

n ar

row

key

to c

ance

l.

Wee

kly

Eve

nts,

Mini

mum

Tim

e O

ff

Ent

er

Enter new value

Current: 00:05:00

00:05:00

v-Cancel ^

Min

imum

Tim

e Of

f Scr

een

Use

the

keyp

ad to

ente

r the

am

ount

of ti

me

the

relay

will

be

held

off

befo

re it

is a

llow

ed to

turn

on

agai

n.Pr

ess t

he [E

nter

] key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

ManualTime 00:02:00

WKday On sMtWtFs

OffIfTime> 01:01:02

OffIfTime< 01:01:00

OnCTime 00:02:00


On if Sw2 On –YES

Off if Sw1 Off-YES

Wee

kly

Eve

nts,

Wee

kday

Sel

ectio

nWeek Day Press 1-7

Active Day

sMtWtFs

1234567

Wee

kday

Sel

ectio

n S

cree

n

Use

the

keyp

ad to

sel

ect w

eekd

ays

with

num

bers

1 to

7. U

pper

cas

e ar

eda

ys o

n, lo

wer

case

are

day

s of

f.Pr

ess t

he [E

nter

] key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

Ent

er

ManualTime 00:02:00

WKday On sMtWtFs <

OffIfTime> 01:01:02

OffIfTime< 01:01:00

OnCTime 00:02:00

MinTimeOff 00:05:00

On if Sw2 On –YES

Off if Sw1 Off-YES

Bac

k

Pres

s the

[Ent

er] k

ey to

mak

e th

ere

lay

oper

atio

n de

pend

ent o

rin

depe

nden

t of t

he s

tatu

s of

the

flow

switc

h SW

1.

Wee

kly

Eve

nts,

Rel

ay O

ff if

SW1

is O

ffW

eekl

y E

vent

s, In

depe

nden

t of S

W1

ManualTime 00:02:00

WKday On sMtWtFs

OffIfTime> 01:01:02

OffIfTime< 01:01:00

OnCTime 00:02:00

MinTimeOff 00:05:00

On if Sw2 On -YES


ManualTime 00:02:00

WKday On sMtWtFs

OffIfTime> 01:01:02

OffIfTime< 01:01:00

OnCTime 00:02:00

MinTimeOff 00:05:00

On if Sw2 On –YES

Off if Sw1 Off-NO <

Ent

er

AK

110

Pro

gram

min

g S

cree

n N

avig

atio

n, W

eekl

y E

vent

s, R

ev 3

22 A

ug 2

008

95

pH

> 7.67-OFF 7.50s

ORP 490 -OFF 700s

Weekly -OFF

69.0f SW1OFFSW2OFF

Mai

n S

tatu

s S

cree

n Name:Main Pool

System

>Programming

Service

Data ( 8:441 )

Communications

Security Setup

Wizards

Serial # 123456

Con

figur

atio

n M

enu,

Pro

gram

min

g

AK

110

Pro

gram

min

g S

cree

n N

avig

atio

n, W

eekl

y Ev

ents

Ent

erB

ack

1:pH, Mix Time

2:ORP, Mix Time

>3:Weekly

A:Alarm

P:Pager1

P:Pager2

P:Pager3

P:Pager4

Pro

gram

ming

Set

up S

cree

n

Wee

kly

Eve

nts,

Man

ual C

ycle

Tim

e

Ent

erB

ack

Enter new value

Current: 00:02:00

00:02:00

v-Cancel ^

Man

ual C

ycle

Tim

e S

cree

n

Use

the

keyp

ad to

ente

r the

man

ual

rela

y on

-tim

e dur

atio

n.Pr

ess t

he [E

nter

] key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

Ent

er

Ent

er

Ent

er

Pres

s the

[Ent

er] k

ey to

mak

e th

ere

lay

oper

atio

n de

pend

ent o

rin

depe

nden

t of th

e st

atus

of s

witc

h 2

(SW

2.)

Not

e:

The

rela

y 3

prog

ram

min

g m

enu

appe

ars i

n th

is fo

rmat

onl

y w

hen

rela

y 3

has b

een c

onfig

ured

for

"Wee

kly"

cont

rol.

Wee

kly

Eve

nts,

Off

if Ti

me

is A

fter

Ent

er

Wee

kly

Eve

nts,

Rel

ay O

n if S

W2

is O

n

Enter new value

Current: 00:02:00

00:02:00

v-Cancel ^

Use

the

keyp

ad to

ent

er th

em

axim

um re

lay

on-ti

me d

urat

ion.

Pres

s the

[Ent

er] k

ey to

con

firm

or

the

dow

n ar

row

key

to c

ance

l.

Use

the

keyp

ad to

ent

er th

e tim

eaf

ter w

hich

the

relay

will

turn

off

.Pr

ess t

he [E

nter

] key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

On

Cal

cula

ted

Tim

e S

cree

n

Off

if Ti

me

is A

fter S

cree

n

Wee

kly

Eve

nts,

Off

if T

ime

is B

efor

eO

ff if

Tim

e is

Bef

ore

Scr

een

Ent

er

Wee

kly

Eve

nts,

On

Cal

cula

ted

Tim

e

Wee

kly

Eve

nts,

Inde

pend

ent o

f SW

2ManualTime 00:02:00<

WKday On sMtWtFs

OffIfTime> 01:01:02

OffIfTime< 01:01:00

OnCTime 00:02:00

MinTimeOff 00:05:00

On if Sw2 On –YES

Off if Sw1 Off-YES

ManualTime 00:02:00

WKday On sMtWtFs


OffIfTime< 01:01:00

OnCTime 00:02:00

MinTimeOff 00:05:00

On if Sw2 On –YES

Off if Sw1 Off-YES

ManualTime 00:02:00

WKday On sMtWtFs

OffIfTime> 01:01:02


OnCTime 00:02:00

MinTimeOff 00:05:00

On if Sw2 On –YES

Off if Sw1 Off-YES

ManualTime 00:02:00

WKday On sMtWtFs

OffIfTime> 01:01:02

OffIfTime< 01:01:00

OnCTime 00:02:00<

MinTimeOff 00:05:00

On if Sw2 On –YES

Off if Sw1 Off-YES

ManualTime 00:02:00

WKday On sMtWtFs

OffIfTime> 01:01:02

OffIfTime< 01:01:00

OnCTime 00:02:00

MinTimeOff 00:05:00

On if Sw2 On -YES <

Off if Sw1 Off-YES

ManualTime 00:02:00

WKday On sMtWtFs

OffIfTime> 01:01:02

OffIfTime< 01:01:00

OnCTime 00:02:00

MinTimeOff 00:05:00


Off if Sw1 Off-YES

Enter new value

Current: 01:01:00

01:01:00

v-Cancel ^

Enter new value

Current: 01:01:02

01:01:02

v-Cancel ^

Use

the

keyp

ad to

ent

er th

e tim

ebe

fore

whi

ch th

e rel

ay w

ill tu

rn o

ff.

Pres

s the

[Ent

er] k

ey to

con

firm

or

the

dow

n ar

row

key

to c

ance

l.

Wee

kly

Eve

nts,

Mini

mum

Tim

e O

ff

Ent

er

Enter new value

Current: 00:05:00

00:05:00

v-Cancel ^

Min

imum

Tim

e Of

f Scr

een

Use

the

keyp

ad to

ente

r the

am

ount

of ti

me

the

relay

will

be

held

off

befo

re it

is a

llow

ed to

turn

on

agai

n.Pr

ess t

he [E

nter

] key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

ManualTime 00:02:00

WKday On sMtWtFs

OffIfTime> 01:01:02

OffIfTime< 01:01:00

OnCTime 00:02:00


On if Sw2 On –YES

Off if Sw1 Off-YES

Wee

kly

Eve

nts,

Wee

kday

Sel

ectio

nWeek Day Press 1-7

Active Day

sMtWtFs

1234567

Wee

kday

Sel

ectio

n S

cree

n

Use

the

keyp

ad to

sel

ect w

eekd

ays

with

num

bers

1 to

7. U

pper

cas

e ar

eda

ys o

n, lo

wer

case

are

day

s of

f.Pr

ess t

he [E

nter

] key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

Ent

er

ManualTime 00:02:00

WKday On sMtWtFs <

OffIfTime> 01:01:02

OffIfTime< 01:01:00

OnCTime 00:02:00

MinTimeOff 00:05:00

On if Sw2 On –YES

Off if Sw1 Off-YES

Bac

k

Pres

s the

[Ent

er] k

ey to

mak

e th

ere

lay

oper

atio

n de

pend

ent o

rin

depe

nden

t of t

he s

tatu

s of

the

flow

switc

h SW

1.

Wee

kly

Eve

nts,

Rel

ay O

ff if

SW1

is O

ffW

eekl

y E

vent

s, In

depe

nden

t of S

W1

ManualTime 00:02:00

WKday On sMtWtFs

OffIfTime> 01:01:02

OffIfTime< 01:01:00

OnCTime 00:02:00

MinTimeOff 00:05:00

On if Sw2 On -YES


ManualTime 00:02:00

WKday On sMtWtFs

OffIfTime> 01:01:02

OffIfTime< 01:01:00

OnCTime 00:02:00

MinTimeOff 00:05:00

On if Sw2 On –YES

Off if Sw1 Off-NO <

Ent

er

AK

110

Pro

gram

min

g S

cree

n N

avig

atio

n, W

eekl

y E

vent

s, R

ev 3

22 A

ug 2

008

96

pH

> 7.67-OFF 7.50s

ORP 490 -OFF 700s

Alarm Out -OFF

69.0f SW1OFFSW2OFF

Mai

n S

tatu

s S

cree

n Name:Main Pool

System

>Programming

Service

Data ( 8:441 )

Communications

Security Setup

Wizards

Serial # 123456

Con

figur

atio

n M

enu,

Pro

gram

min

g

AK

110

Pro

gram

min

g S

cree

n N

avig

atio

n, F

ront

Pan

el A

larm

(1 o

f 2)

Ent

erB

ack

1:pH, Mix Time

2:ORP, Mix Time

3:Not Used

>A:Alarm

P:Pager1

P:Pager2

P:Pager3

P:Pager4

Pro

gram

ming

Set

up S

cree

n

Ent

erB

ack

Ala

rm, O

n if

SW

1 is

Off

Ala

rm, L

ow O

RP

Set

poin

t

Ala

rm, N

ot O

n if

SW

1 is

Off

Ent

er

Enter new value

Current: 630

630

v-Cancel ^

Use

the

keyp

ad to

ent

er th

e lo

wO

RP

valu

e un

der w

hich

the

fron

tpa

nel a

larm

indi

cato

r will

turn

on.

Pres

s the

[Ent

er] k

ey to

con

firm

or

the

dow

n ar

row

key

to c

ance

l.

Ent

er

Low

OR

P S

etpo

int S

cree

n

Ent

er

Ala

rm, H

igh

pH S

etpo

int

Enter new value

Current: 8.00

8.00

v-Cancel ^

Use

the

keyp

ad to

ent

er th

e hi

gh p

Hva

lue

over

whi

ch th

e fr

ont p

anel

alar

m in

dica

tor w

ill tu

rn o

n.Pr

ess t

he [E

nter

] key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

Hig

h pH

Set

poin

t Scr

een

Ala

rm, H

igh

OR

P S

etpo

int

Ent

er

Hig

h O

RP

Set

poin

t Scr

een

On if Sw1 Off-YES <

On If ORP< 630

On If ORP> 770

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0

Off if Sw1 Off-NO

On if Sw2 On –NO

On if Sw2 Off-NO

On If Overfeed YES

On DELAY 00:10:00

MinTime On 00:00:10

MinTimeOff 00:00:10

On if Sw1 Off-NO <

On If ORP< 630

On If ORP> 770

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0

Off if Sw1 Off-NO

On if Sw2 On –NO

On if Sw2 Off-NO

On If Overfeed YES

On DELAY 00:10:00

MinTime On 00:00:10

MinTimeOff 00:00:10

On if Sw1 Off-YES

On If ORP< 630<

On If ORP> 770

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0

Off if Sw1 Off-NO

On if Sw2 On –NO

On if Sw2 Off-NO

On If Overfeed YES

On DELAY 00:10:00

MinTime On 00:00:10

MinTimeOff 00:00:10

Pres

s the

[Ent

er] k

ey to

cho

ose

whe

ther

the

fron

t pan

el a

larm

indi

cato

r is t

urne

d on

whe

n th

e flo

wsw

itch S

W1

is o

ff.

Enter new value

Current: 770

770

v-Cancel ^

Use

the

keyp

ad to

ent

er th

e hi

ghO

RP

valu

e ov

er w

hich

the

fron

tpa

nel a

larm

indi

cato

r will

turn

on.

Pres

s the

[Ent

er] k

ey to

con

firm

or

the

dow

n ar

row

key

to c

ance

l.

On if Sw1 Off-YES

On If ORP< 630

On If ORP> 770<

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0

Off if Sw1 Off-NO

On if Sw2 On –NO

On if Sw2 Off-NO

On If Overfeed YES

On DELAY 00:10:00

MinTime On 00:00:10

MinTimeOff 00:00:10

On if Sw1 Off-YES

On If ORP< 630

On If ORP> 770

On If pH> 8.00<

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0

Off if Sw1 Off-NO

On if Sw2 On –NO

On if Sw2 Off-NO

On If Overfeed YES

On DELAY 00:10:00

MinTime On 00:00:10

MinTimeOff 00:00:10

Ent

er

Ala

rm, L

ow p

H S

etpo

int

Enter new value

Current: 7.00

7.00

v-Cancel ^

Use

the

keyp

ad to

ent

er th

e lo

w p

Hva

lue

unde

r whi

ch th

e fr

ont p

anel

alar

m in

dica

tor w

ill tu

rn o

n.Pr

ess t

he [E

nter

] key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

Low

pH

Set

poin

t Scr

een

On if Sw1 Off-YES

On If ORP< 630

On If ORP> 770

On If pH> 8.00

On If pH< 7.00<

On If Temp< 32.0

On If Temp> 104.0

Off if Sw1 Off-NO

On if Sw2 On –NO

On if Sw2 Off-NO

On If Overfeed YES

On DELAY 00:10:00

MinTime On 00:00:10

MinTimeOff 00:00:10

Ent

er

Ala

rm, L

ow T

empe

ratu

re S

etpo

int

Enter new value

Current: 32.0

32.0

v-Cancel ^

Use

the

keyp

ad to

ent

er th

e lo

wte

mpe

ratu

re u

nder

whi

ch th

e fr

ont

pane

l ala

rm in

dica

tor w

ill tu

rn o

n.Pr

ess t

he [E

nter

] key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

Low

Tem

pera

ture

Set

poin

t Scr

een

On if Sw1 Off-YES

On If ORP< 630

On If ORP> 770

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0<

On If Temp> 104.0

Off if Sw1 Off-NO

On if Sw2 On –NO

On if Sw2 Off-NO

On If Overfeed YES

On DELAY 00:10:00

MinTime On 00:00:10

MinTimeOff 00:00:10

Ent

er

Ala

rm, H

igh

Tem

pera

ture

Set

poin

tEnter new value

Current: 104.0

104.0

v-Cancel ^

Use

the

keyp

ad to

ent

er th

e hi

ghte

mpe

ratu

re o

ver w

hich

the

fron

tpa

nel a

larm

indi

cato

r will

turn

on.

Pres

s the

[Ent

er] k

ey to

con

firm

or

the

dow

n ar

row

key

to c

ance

l.

Hig

h Te

mpe

ratu

re S

etpo

int S

cree

nOn if Sw1 Off-YES

On If ORP< 630

On If ORP> 770

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0<

Off if Sw1 Off-NO

On if Sw2 On –NO

On if Sw2 Off-NO

On If Overfeed YES

On DELAY 00:10:00

MinTime On 00:00:10

MinTimeOff 00:00:10

To

Fron

t Pan

el A

larm

(2 o

f 2)

Not

e:

The

optio

ns a

vaila

ble

on th

e Fr

ont

Pane

l Ala

rm S

cree

n pr

ogra

mm

ing

men

u m

ay v

ary

in a

ccor

danc

e w

ithth

e ch

osen

con

figur

atio

ns fo

r rel

ays

1, 2

and

3.

Bac

k

AK

110

Pro

gram

min

g S

cree

n N

avig

atio

n, F

ront

Pan

el A

larm

, Rev

322

Aug

200

8

10.19

97

pH

> 7.67-OFF 7.50s

ORP 490 -OFF 700s

Alarm Out -OFF

69.0f SW1OFFSW2OFF

Mai

n S

tatu

s S

cree

n Name:Main Pool

System

>Programming

Service

Data ( 8:441 )

Communications

Security Setup

Wizards

Serial # 123456

Con

figur

atio

n M

enu,

Pro

gram

min

g

AK

110

Pro

gram

min

g S

cree

n N

avig

atio

n, F

ront

Pan

el A

larm

(1 o

f 2)

Ent

erB

ack

1:pH, Mix Time

2:ORP, Mix Time

3:Not Used

>A:Alarm

P:Pager1

P:Pager2

P:Pager3

P:Pager4

Pro

gram

ming

Set

up S

cree

n

Ent

erB

ack

Ala

rm, O

n if

SW

1 is

Off

Ala

rm, L

ow O

RP

Set

poin

t

Ala

rm, N

ot O

n if

SW

1 is

Off

Ent

er

Enter new value

Current: 630

630

v-Cancel ^

Use

the

keyp

ad to

ent

er th

e lo

wO

RP

valu

e un

der w

hich

the

fron

tpa

nel a

larm

indi

cato

r will

turn

on.

Pres

s the

[Ent

er] k

ey to

con

firm

or

the

dow

n ar

row

key

to c

ance

l.

Ent

er

Low

OR

P S

etpo

int S

cree

n

Ent

er

Ala

rm, H

igh

pH S

etpo

int

Enter new value

Current: 8.00

8.00

v-Cancel ^

Use

the

keyp

ad to

ent

er th

e hi

gh p

Hva

lue

over

whi

ch th

e fr

ont p

anel

alar

m in

dica

tor w

ill tu

rn o

n.Pr

ess t

he [E

nter

] key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

Hig

h pH

Set

poin

t Scr

een

Ala

rm, H

igh

OR

P S

etpo

int

Ent

er

Hig

h O

RP

Set

poin

t Scr

een

On if Sw1 Off-YES <

On If ORP< 630

On If ORP> 770

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0

Off if Sw1 Off-NO

On if Sw2 On –NO

On if Sw2 Off-NO

On If Overfeed YES

On DELAY 00:10:00

MinTime On 00:00:10

MinTimeOff 00:00:10

On if Sw1 Off-NO <

On If ORP< 630

On If ORP> 770

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0

Off if Sw1 Off-NO

On if Sw2 On –NO

On if Sw2 Off-NO

On If Overfeed YES

On DELAY 00:10:00

MinTime On 00:00:10

MinTimeOff 00:00:10

On if Sw1 Off-YES

On If ORP< 630<

On If ORP> 770

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0

Off if Sw1 Off-NO

On if Sw2 On –NO

On if Sw2 Off-NO

On If Overfeed YES

On DELAY 00:10:00

MinTime On 00:00:10

MinTimeOff 00:00:10

Pres

s the

[Ent

er] k

ey to

cho

ose

whe

ther

the

fron

t pan

el a

larm

indi

cato

r is t

urne

d on

whe

n th

e flo

wsw

itch S

W1

is o

ff.

Enter new value

Current: 770

770

v-Cancel ^

Use

the

keyp

ad to

ent

er th

e hi

ghO

RP

valu

e ov

er w

hich

the

fron

tpa

nel a

larm

indi

cato

r will

turn

on.

Pres

s the

[Ent

er] k

ey to

con

firm

or

the

dow

n ar

row

key

to c

ance

l.

On if Sw1 Off-YES

On If ORP< 630

On If ORP> 770<

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0

Off if Sw1 Off-NO

On if Sw2 On –NO

On if Sw2 Off-NO

On If Overfeed YES

On DELAY 00:10:00

MinTime On 00:00:10

MinTimeOff 00:00:10

On if Sw1 Off-YES

On If ORP< 630

On If ORP> 770

On If pH> 8.00<

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0

Off if Sw1 Off-NO

On if Sw2 On –NO

On if Sw2 Off-NO

On If Overfeed YES

On DELAY 00:10:00

MinTime On 00:00:10

MinTimeOff 00:00:10

Ent

er

Ala

rm, L

ow p

H S

etpo

int

Enter new value

Current: 7.00

7.00

v-Cancel ^

Use

the

keyp

ad to

ent

er th

e lo

w p

Hva

lue

unde

r whi

ch th

e fr

ont p

anel

alar

m in

dica

tor w

ill tu

rn o

n.Pr

ess t

he [E

nter

] key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

Low

pH

Set

poin

t Scr

een

On if Sw1 Off-YES

On If ORP< 630

On If ORP> 770

On If pH> 8.00

On If pH< 7.00<

On If Temp< 32.0

On If Temp> 104.0

Off if Sw1 Off-NO

On if Sw2 On –NO

On if Sw2 Off-NO

On If Overfeed YES

On DELAY 00:10:00

MinTime On 00:00:10

MinTimeOff 00:00:10

Ent

er

Ala

rm, L

ow T

empe

ratu

re S

etpo

int

Enter new value

Current: 32.0

32.0

v-Cancel ^

Use

the

keyp

ad to

ent

er th

e lo

wte

mpe

ratu

re u

nder

whi

ch th

e fr

ont

pane

l ala

rm in

dica

tor w

ill tu

rn o

n.Pr

ess t

he [E

nter

] key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

Low

Tem

pera

ture

Set

poin

t Scr

een

On if Sw1 Off-YES

On If ORP< 630

On If ORP> 770

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0<

On If Temp> 104.0

Off if Sw1 Off-NO

On if Sw2 On –NO

On if Sw2 Off-NO

On If Overfeed YES

On DELAY 00:10:00

MinTime On 00:00:10

MinTimeOff 00:00:10

Ent

er

Ala

rm, H

igh

Tem

pera

ture

Set

poin

tEnter new value

Current: 104.0

104.0

v-Cancel ^

Use

the

keyp

ad to

ent

er th

e hi

ghte

mpe

ratu

re o

ver w

hich

the

fron

tpa

nel a

larm

indi

cato

r will

turn

on.

Pres

s the

[Ent

er] k

ey to

con

firm

or

the

dow

n ar

row

key

to c

ance

l.

Hig

h Te

mpe

ratu

re S

etpo

int S

cree

nOn if Sw1 Off-YES

On If ORP< 630

On If ORP> 770

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0<

Off if Sw1 Off-NO

On if Sw2 On –NO

On if Sw2 Off-NO

On If Overfeed YES

On DELAY 00:10:00

MinTime On 00:00:10

MinTimeOff 00:00:10

To

Fron

t Pan

el A

larm

(2 o

f 2)

Not

e:

The

optio

ns a

vaila

ble

on th

e Fr

ont

Pane

l Ala

rm S

cree

n pr

ogra

mm

ing

men

u m

ay v

ary

in a

ccor

danc

e w

ithth

e ch

osen

con

figur

atio

ns fo

r rel

ays

1, 2

and

3.

Bac

k

AK

110

Pro

gram

min

g S

cree

n N

avig

atio

n, F

ront

Pan

el A

larm

, Rev

322

Aug

200

8

98

AK

110

Pro

gram

min

g S

cree

n N

avig

atio

n, F

ront

Pan

el A

larm

(2 o

f 2)

Use

the

keyp

ad to

ent

er th

e tim

ede

lay

betw

een

the a

larm

trig

ger a

ndtu

rnin

g on

of t

he fr

ont p

anel

ala

rm.

Pres

s the

[Ent

er] k

ey to

con

firm

or

the

dow

n ar

row

key

to c

ance

l.

Del

ay T

ime

Scr

een

Enter new value

Current: 00:10:00

00:10:00

v-Cancel ^

Ent

er

Ala

rm, D

elay

Tim

eOn if Sw1 Off-YES

On If ORP< 630

On If ORP> 770

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0

Off if Sw1 Off-NO

On if Sw2 On –NO

On if Sw2 Off-NO

On If Overfeed YES

On DELAY 00:10:00<

MinTime On 00:00:10

MinTimeOff 00:00:10

Ala

rm, O

n if

SW

2 is

Off

Ent

er

Ala

rm, N

ot O

n if S

W2

is O

ffOn if Sw1 Off-YES

On If ORP< 630

On If ORP> 770

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0

Off if Sw1 Off-NO

On if Sw2 On –NO

On if Sw2 Off-NO <

On If Overfeed YES

On DELAY 00:10:00

MinTime On 00:00:10

MinTimeOff 00:00:10

On if Sw1 Off-YES

On If ORP< 630

On If ORP> 770

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0

Off if Sw1 Off-NO

On if Sw2 On –NO

On if Sw2 Off-YES <

On If Overfeed YES

On DELAY 00:10:00

MinTime On 00:00:10

MinTimeOff 00:00:10

Pres

s the

[Ente

r] k

ey to

cho

ose

whe

ther

the

front

pan

el a

larm

indi

cato

r is t

urne

d on

whe

n sw

itch

2(S

W2)

is o

ff.

Ala

rm, N

ot O

n if

Ove

rfee

d O

ccur

s

Ent

er

Ala

rm, O

n if

Ove

rfee

d O

ccur

sOn if Sw1 Off-YES

On If ORP< 630

On If ORP> 770

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0

Off if Sw1 Off-NO

On if Sw2 On –NO

On if Sw2 Off-NO

On If Overfeed YES<

On DELAY 00:10:00

MinTime On 00:00:10

MinTimeOff 00:00:10

On if Sw1 Off-YES

On If ORP< 630

On If ORP> 770

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0

Off if Sw1 Off-NO

On if Sw2 On –NO

On if Sw2 Off-NO

On If Overfeed NO<

On DELAY 00:10:00

MinTime On 00:00:10

MinTimeOff 00:00:10

Pres

s the

[Ente

r] k

ey to

cho

ose

whe

ther

the

front

pan

el a

larm

indi

cato

r is t

urne

d on

whe

n an

over

feed

cond

ition

occ

urs.

Ala

rm, M

inim

um T

ime

Off

On if Sw1 Off-YES

On If ORP< 630

On If ORP> 770

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0

Off if Sw1 Off-NO

On if Sw2 On –NO

On if Sw2 Off-NO

On If Overfeed YES

On DELAY 00:10:00

MinTime On 00:00:10


Use

the

keyp

ad to

ent

er th

e am

ount

of ti

me

the

alar

m w

ill b

e he

ld o

ffon

ce a

n al

arm

con

ditio

n is

fixe

d.Pr

ess t

he [E

nter]

key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

Min

imum

Tim

e O

ff S

cree

nEnter new value

Current: 00:00:10

00:00:10

v-Cancel ^

Ent

er

Fro

m F

ront

Pan

el A

larm

(1 o

f 2)

Ala

rm, M

inim

um T

ime

On

On if Sw1 Off-YES

On If ORP< 630

On If ORP> 770

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0

Off if Sw1 Off-NO

On if Sw2 On –NO

On if Sw2 Off-NO

On If Overfeed YES

On DELAY 00:10:00


MinTimeOff 00:00:10

Use

the

keyp

ad to

ent

er th

e am

ount

of ti

me

the

fron

t pan

el w

ill b

e he

ldon

onc

e an

alar

m c

ondi

tion

occu

rs.

Pres

s the

[Ent

er] k

ey to

con

firm

or

the

dow

n ar

row

key

to c

ance

l.

Min

imum

Tim

e O

n S

cree

nEnter new value

Current: 00:00:10

00:00:10

v-Cancel ^

Ent

er

Ala

rm, O

ff if

SW

1 is

Off

Ent

er

Ala

rm, N

ot O

ff if

SW1

is O

ffOn if Sw1 Off-YES

On If ORP< 630

On If ORP> 770

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0

Off if Sw1 Off-NO <

On if Sw2 On –NO

On if Sw2 Off-NO

On If Overfeed YES

On DELAY 00:10:00

MinTime On 00:00:10

MinTimeOff 00:00:10

On if Sw1 Off-YES

On If ORP< 630

On If ORP> 770

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0


On if Sw2 On –NO

On if Sw2 Off-NO

On If Overfeed YES

On DELAY 00:10:00

MinTime On 00:00:10

MinTimeOff 00:00:10

Pres

s the

[Ente

r] k

ey to

cho

ose

whe

ther

the

front

pan

el a

larm

indi

cato

r is t

urne

d of

f whe

n th

e flo

wsw

itch

SW1

is o

ff.

Ala

rm, O

n if

SW

2 is

On

Ent

er

Ala

rm, N

ot O

n if

SW

2 is

On

On if Sw1 Off-YES

On If ORP< 630

On If ORP> 770

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0

Off if Sw1 Off-NO


On if Sw2 Off-NO

On If Overfeed YES

On DELAY 00:10:00

MinTime On 00:00:10

MinTimeOff 00:00:10

On if Sw1 Off-YES

On If ORP< 630

On If ORP> 770

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0

Off if Sw1 Off-NO


On if Sw2 Off-NO

On If Overfeed YES

On DELAY 00:10:00

MinTime On 00:00:10

MinTimeOff 00:00:10

Pres

s the

[Ente

r] k

ey to

cho

ose

whe

ther

the

front

pan

el a

larm

indi

cato

r is t

urne

d on

whe

n sw

itch

2(S

W2)

is o

n.

AK

110

Pro

gram

min

g S

cree

n N

avig

atio

n, F

ront

Pan

el A

larm

, Rev

322

Aug

200

8

99

AK

110

Pro

gram

min

g S

cree

n N

avig

atio

n, F

ront

Pan

el A

larm

(2 o

f 2)

Use

the

keyp

ad to

ent

er th

e tim

ede

lay

betw

een

the a

larm

trig

ger a

ndtu

rnin

g on

of t

he fr

ont p

anel

ala

rm.

Pres

s the

[Ent

er] k

ey to

con

firm

or

the

dow

n ar

row

key

to c

ance

l.

Del

ay T

ime

Scr

een

Enter new value

Current: 00:10:00

00:10:00

v-Cancel ^

Ent

er

Ala

rm, D

elay

Tim

eOn if Sw1 Off-YES

On If ORP< 630

On If ORP> 770

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0

Off if Sw1 Off-NO

On if Sw2 On –NO

On if Sw2 Off-NO

On If Overfeed YES

On DELAY 00:10:00<

MinTime On 00:00:10

MinTimeOff 00:00:10

Ala

rm, O

n if

SW

2 is

Off

Ent

er

Ala

rm, N

ot O

n if S

W2

is O

ffOn if Sw1 Off-YES

On If ORP< 630

On If ORP> 770

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0

Off if Sw1 Off-NO

On if Sw2 On –NO

On if Sw2 Off-NO <

On If Overfeed YES

On DELAY 00:10:00

MinTime On 00:00:10

MinTimeOff 00:00:10

On if Sw1 Off-YES

On If ORP< 630

On If ORP> 770

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0

Off if Sw1 Off-NO

On if Sw2 On –NO

On if Sw2 Off-YES <

On If Overfeed YES

On DELAY 00:10:00

MinTime On 00:00:10

MinTimeOff 00:00:10

Pres

s the

[Ente

r] k

ey to

cho

ose

whe

ther

the

front

pan

el a

larm

indi

cato

r is t

urne

d on

whe

n sw

itch

2(S

W2)

is o

ff.

Ala

rm, N

ot O

n if

Ove

rfee

d O

ccur

s

Ent

er

Ala

rm, O

n if

Ove

rfee

d O

ccur

sOn if Sw1 Off-YES

On If ORP< 630

On If ORP> 770

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0

Off if Sw1 Off-NO

On if Sw2 On –NO

On if Sw2 Off-NO

On If Overfeed YES<

On DELAY 00:10:00

MinTime On 00:00:10

MinTimeOff 00:00:10

On if Sw1 Off-YES

On If ORP< 630

On If ORP> 770

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0

Off if Sw1 Off-NO

On if Sw2 On –NO

On if Sw2 Off-NO

On If Overfeed NO<

On DELAY 00:10:00

MinTime On 00:00:10

MinTimeOff 00:00:10

Pres

s the

[Ente

r] k

ey to

cho

ose

whe

ther

the

front

pan

el a

larm

indi

cato

r is t

urne

d on

whe

n an

over

feed

cond

ition

occ

urs.

Ala

rm, M

inim

um T

ime

Off

On if Sw1 Off-YES

On If ORP< 630

On If ORP> 770

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0

Off if Sw1 Off-NO

On if Sw2 On –NO

On if Sw2 Off-NO

On If Overfeed YES

On DELAY 00:10:00

MinTime On 00:00:10


Use

the

keyp

ad to

ent

er th

e am

ount

of ti

me

the

alar

m w

ill b

e he

ld o

ffon

ce a

n al

arm

con

ditio

n is

fixe

d.Pr

ess t

he [E

nter]

key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

Min

imum

Tim

e O

ff S

cree

nEnter new value

Current: 00:00:10

00:00:10

v-Cancel ^

Ent

er

Fro

m F

ront

Pan

el A

larm

(1 o

f 2)

Ala

rm, M

inim

um T

ime

On

On if Sw1 Off-YES

On If ORP< 630

On If ORP> 770

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0

Off if Sw1 Off-NO

On if Sw2 On –NO

On if Sw2 Off-NO

On If Overfeed YES

On DELAY 00:10:00


MinTimeOff 00:00:10

Use

the

keyp

ad to

ent

er th

e am

ount

of ti

me

the

fron

t pan

el w

ill b

e he

ldon

onc

e an

alar

m c

ondi

tion

occu

rs.

Pres

s the

[Ent

er] k

ey to

con

firm

or

the

dow

n ar

row

key

to c

ance

l.

Min

imum

Tim

e O

n S

cree

nEnter new value

Current: 00:00:10

00:00:10

v-Cancel ^

Ent

er

Ala

rm, O

ff if

SW

1 is

Off

Ent

er

Ala

rm, N

ot O

ff if

SW1

is O

ffOn if Sw1 Off-YES

On If ORP< 630

On If ORP> 770

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0

Off if Sw1 Off-NO <

On if Sw2 On –NO

On if Sw2 Off-NO

On If Overfeed YES

On DELAY 00:10:00

MinTime On 00:00:10

MinTimeOff 00:00:10

On if Sw1 Off-YES

On If ORP< 630

On If ORP> 770

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0


On if Sw2 On –NO

On if Sw2 Off-NO

On If Overfeed YES

On DELAY 00:10:00

MinTime On 00:00:10

MinTimeOff 00:00:10

Pres

s the

[Ente

r] k

ey to

cho

ose

whe

ther

the

front

pan

el a

larm

indi

cato

r is t

urne

d of

f whe

n th

e flo

wsw

itch

SW1

is o

ff.

Ala

rm, O

n if

SW

2 is

On

Ent

er

Ala

rm, N

ot O

n if

SW

2 is

On

On if Sw1 Off-YES

On If ORP< 630

On If ORP> 770

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0

Off if Sw1 Off-NO


On if Sw2 Off-NO

On If Overfeed YES

On DELAY 00:10:00

MinTime On 00:00:10

MinTimeOff 00:00:10

On if Sw1 Off-YES

On If ORP< 630

On If ORP> 770

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0

Off if Sw1 Off-NO


On if Sw2 Off-NO

On If Overfeed YES

On DELAY 00:10:00

MinTime On 00:00:10

MinTimeOff 00:00:10

Pres

s the

[Ente

r] k

ey to

cho

ose

whe

ther

the

front

pan

el a

larm

indi

cato

r is t

urne

d on

whe

n sw

itch

2(S

W2)

is o

n.

AK

110

Pro

gram

min

g S

cree

n N

avig

atio

n, F

ront

Pan

el A

larm

, Rev

322

Aug

200

8

AK

110

Pro

gram

min

g S

cree

n N

avig

atio

n, F

ront

Pan

el A

larm

(2 o

f 2)

Use

the

keyp

ad to

ent

er th

e tim

ede

lay

betw

een

the a

larm

trig

ger a

ndtu

rnin

g on

of t

he fr

ont p

anel

ala

rm.

Pres

s the

[Ent

er] k

ey to

con

firm

or

the

dow

n ar

row

key

to c

ance

l.

Del

ay T

ime

Scr

een

Enter new value

Current: 00:10:00

00:10:00

v-Cancel ^

Ent

er

Ala

rm, D

elay

Tim

eOn if Sw1 Off-YES

On If ORP< 630

On If ORP> 770

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0

Off if Sw1 Off-NO

On if Sw2 On –NO

On if Sw2 Off-NO

On If Overfeed YES

On DELAY 00:10:00<

MinTime On 00:00:10

MinTimeOff 00:00:10

Ala

rm, O

n if

SW

2 is

Off

Ent

er

Ala

rm, N

ot O

n if S

W2

is O

ffOn if Sw1 Off-YES

On If ORP< 630

On If ORP> 770

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0

Off if Sw1 Off-NO

On if Sw2 On –NO

On if Sw2 Off-NO <

On If Overfeed YES

On DELAY 00:10:00

MinTime On 00:00:10

MinTimeOff 00:00:10

On if Sw1 Off-YES

On If ORP< 630

On If ORP> 770

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0

Off if Sw1 Off-NO

On if Sw2 On –NO

On if Sw2 Off-YES <

On If Overfeed YES

On DELAY 00:10:00

MinTime On 00:00:10

MinTimeOff 00:00:10

Pres

s the

[Ente

r] k

ey to

cho

ose

whe

ther

the

front

pan

el a

larm

indi

cato

r is t

urne

d on

whe

n sw

itch

2(S

W2)

is o

ff.

Ala

rm, N

ot O

n if

Ove

rfee

d O

ccur

s

Ent

er

Ala

rm, O

n if

Ove

rfee

d O

ccur

sOn if Sw1 Off-YES

On If ORP< 630

On If ORP> 770

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0

Off if Sw1 Off-NO

On if Sw2 On –NO

On if Sw2 Off-NO

On If Overfeed YES<

On DELAY 00:10:00

MinTime On 00:00:10

MinTimeOff 00:00:10

On if Sw1 Off-YES

On If ORP< 630

On If ORP> 770

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0

Off if Sw1 Off-NO

On if Sw2 On –NO

On if Sw2 Off-NO

On If Overfeed NO<

On DELAY 00:10:00

MinTime On 00:00:10

MinTimeOff 00:00:10

Pres

s the

[Ente

r] k

ey to

cho

ose

whe

ther

the

front

pan

el a

larm

indi

cato

r is t

urne

d on

whe

n an

over

feed

cond

ition

occ

urs.

Ala

rm, M

inim

um T

ime

Off

On if Sw1 Off-YES

On If ORP< 630

On If ORP> 770

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0

Off if Sw1 Off-NO

On if Sw2 On –NO

On if Sw2 Off-NO

On If Overfeed YES

On DELAY 00:10:00

MinTime On 00:00:10


Use

the

keyp

ad to

ent

er th

e am

ount

of ti

me

the

alar

m w

ill b

e he

ld o

ffon

ce a

n al

arm

con

ditio

n is

fixe

d.Pr

ess t

he [E

nter]

key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

Min

imum

Tim

e O

ff S

cree

nEnter new value

Current: 00:00:10

00:00:10

v-Cancel ^

Ent

er

Fro

m F

ront

Pan

el A

larm

(1 o

f 2)

Ala

rm, M

inim

um T

ime

On

On if Sw1 Off-YES

On If ORP< 630

On If ORP> 770

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0

Off if Sw1 Off-NO

On if Sw2 On –NO

On if Sw2 Off-NO

On If Overfeed YES

On DELAY 00:10:00


MinTimeOff 00:00:10

Use

the

keyp

ad to

ent

er th

e am

ount

of ti

me

the

fron

t pan

el w

ill b

e he

ldon

onc

e an

alar

m c

ondi

tion

occu

rs.

Pres

s the

[Ent

er] k

ey to

con

firm

or

the

dow

n ar

row

key

to c

ance

l.

Min

imum

Tim

e O

n S

cree

nEnter new value

Current: 00:00:10

00:00:10

v-Cancel ^

Ent

er

Ala

rm, O

ff if

SW

1 is

Off

Ent

er

Ala

rm, N

ot O

ff if

SW1

is O

ffOn if Sw1 Off-YES

On If ORP< 630

On If ORP> 770

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0

Off if Sw1 Off-NO <

On if Sw2 On –NO

On if Sw2 Off-NO

On If Overfeed YES

On DELAY 00:10:00

MinTime On 00:00:10

MinTimeOff 00:00:10

On if Sw1 Off-YES

On If ORP< 630

On If ORP> 770

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0


On if Sw2 On –NO

On if Sw2 Off-NO

On If Overfeed YES

On DELAY 00:10:00

MinTime On 00:00:10

MinTimeOff 00:00:10

Pres

s the

[Ente

r] k

ey to

cho

ose

whe

ther

the

front

pan

el a

larm

indi

cato

r is t

urne

d of

f whe

n th

e flo

wsw

itch

SW1

is o

ff.

Ala

rm, O

n if

SW

2 is

On

Ent

er

Ala

rm, N

ot O

n if

SW

2 is

On

On if Sw1 Off-YES

On If ORP< 630

On If ORP> 770

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0

Off if Sw1 Off-NO


On if Sw2 Off-NO

On If Overfeed YES

On DELAY 00:10:00

MinTime On 00:00:10

MinTimeOff 00:00:10

On if Sw1 Off-YES

On If ORP< 630

On If ORP> 770

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0

Off if Sw1 Off-NO


On if Sw2 Off-NO

On If Overfeed YES

On DELAY 00:10:00

MinTime On 00:00:10

MinTimeOff 00:00:10

Pres

s the

[Ente

r] k

ey to

cho

ose

whe

ther

the

front

pan

el a

larm

indi

cato

r is t

urne

d on

whe

n sw

itch

2(S

W2)

is o

n.

AK

110

Pro

gram

min

g S

cree

n N

avig

atio

n, F

ront

Pan

el A

larm

, Rev

322

Aug

200

8

100

10.20

pH

> 7.67-OFF 7.50s

ORP 490 -OFF 700s

_____

69.0f SW1OFFSW2OFF

Mai

n S

tatu

s S

cree

n Name:Main Pool

System

>Programming

Service

Data ( 8:441 )

Communications

Security Setup

Wizards

Serial # 123456

Con

figur

atio

n M

enu,

Pro

gram

min

g

AK

110

Pro

gram

min

g S

cree

n N

avig

atio

n, P

ager

1 (1

of 2

)

Ent

erB

ack

1:pH, Mix Time

2:ORP, Mix Time

3:Not Used

A:Alarm

>P:Pager1

P:Pager2

P:Pager3

P:Pager4

Pro

gram

ming

Set

up S

cree

n

Pag

er 1

, On

if P

anel

Ala

rm is

On

Ent

erB

ack

Pag

er 1

, On

if S

W1

is O

ff

Pag

er 1

, Low

OR

P S

etpo

int

Pag

er 1

, Not

On

if Pan

el A

larm

is O

n

Pres

s the

[Ent

er] k

ey to

cho

ose

whe

ther

pag

er 1

is to

be

used

whe

nth

e A

K11

0 fr

ont p

anel

ala

rmin

dica

tor i

s on

.

Ent

er

Pag

er 1

, Not

On

if S

W1

is O

ff

Ent

er

Enter new value

Current: 630

630

v-Cancel ^

Use

the

keyp

ad to

ent

er th

e lo

wO

RP

valu

e un

der w

hich

pag

er 1

is to

be a

ctiv

ated

.Pr

ess t

he [E

nter

] key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

Ent

er

Low

OR

P S

etpo

int S

cree

n

Ent

er

Pag

er 1

, High

pH

Set

poin

tEnter new value

Current: 8.00

8.00

v-Cancel ^

Use

the

keyp

ad to

ent

er th

e hi

gh p

Hva

lue

over

whi

ch pa

ger 1

is to

be

activ

ated

.Pr

ess t

he [E

nter

] key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

Hig

h pH

Set

poin

t Scr

een

Not

e:

The

Prog

ram

min

g Se

tup

Scre

endi

spla

ys fo

ur p

agers

whe

n a

dial

-up

mod

em (o

r no

mod

em a

t all)

isin

stal

led

in th

e co

ntro

ller.

The

optio

ns a

vaila

ble

on th

e Pa

ger

1 Sc

reen

pro

gram

min

g men

u m

ayva

ry in

acc

orda

nce

with

the

chos

enco

nfig

urat

ions

for r

elay

s 1

and

2.

The

prog

ram

min

g m

enus

for p

ager

s2,

3 a

nd 4

are

iden

tical

to th

at o

fpa

ger 1

.

If a

cel

lula

r mod

em is

inst

alle

d in

the

cont

rolle

r, th

ese fo

ur p

ager

s ar

ere

plac

ed w

ith si

mila

r E-m

ail

prog

ram

min

g m

enus

.

On If Alarm On YES<

On if Sw1 Off-YES

On If ORP< 630

On If ORP> 770

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0

Off if Sw1 Off-NO

On if Sw2 Off-NO

On If Overfeed YES

On DELAY 00:10:00

On Time 00:00:02

MinTimeOff 12:00:00

On If Alarm On NO <

On if Sw1 Off-YES

On If ORP< 630

On If ORP> 770

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0

Off if Sw1 Off-NO

On if Sw2 On –NO

On if Sw2 Off-NO

On If Overfeed YES

On DELAY 00:10:00

On Time 00:00:02

MinTimeOff 12:00:00

On If Alarm On YES

On if Sw1 Off-YES <

On If ORP< 630

On If ORP> 770

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0

Off if Sw1 Off-NO

On if Sw2 Off-NO

On If Overfeed YES

On DELAY 00:10:00

On Time 00:00:02

MinTimeOff 12:00:00

On If Alarm On YES

On if Sw1 Off-NO <

On If ORP< 630

On If ORP> 770

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0

Off if Sw1 Off-NO

On if Sw2 Off-NO

On If Overfeed YES

On DELAY 00:10:00

On Time 00:00:02

MinTimeOff 12:00:00

On If Alarm On YES

On if Sw1 Off-YES

On If ORP< 630<

On If ORP> 770

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0

Off if Sw1 Off-NO

On if Sw2 Off-NO

On If Overfeed YES

On DELAY 00:10:00

On Time 00:00:02

MinTimeOff 12:00:00

Pres

s the

[Ent

er] k

ey to

cho

ose

whe

ther

pag

er 1

is to

be

used

whe

nth

e flo

w sw

itch

SW1

is o

ff.

On If Alarm On YES

On if Sw1 Off-YES

On If ORP< 630

On If ORP> 770

On If pH> 8.00<

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0

Off if Sw1 Off-NO

On if Sw2 Off-NO

On If Overfeed YES

On DELAY 00:10:00

On Time 00:00:02

MinTimeOff 12:00:00

Ent

er

Pag

er 1

, Low

pH

Set

poin

tEnter new value

Current: 7.00

7.00

v-Cancel ^

Use

the

keyp

ad to

ent

er th

e lo

w p

Hva

lue

unde

r whi

ch pa

ger 1

is to

be

activ

ated

.Pr

ess t

he [E

nter

] key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

Low

pH

Set

poin

t Scr

een

On If Alarm On YES

On if Sw1 Off-YES

On If ORP< 630

On If ORP> 770

On If pH> 8.00

On If pH< 7.00<

On If Temp< 32.0

On If Temp> 104.0

Off if Sw1 Off-NO

On if Sw2 Off-NO

On If Overfeed YES

On DELAY 00:10:00

On Time 00:00:02

MinTimeOff 12:00:00

Ent

er

Pag

er 1

, Low

Tem

pera

ture

Set

poin

tEnter new value

Current: 32.0

32.0

v-Cancel ^

Use

the

keyp

ad to

ent

er th

e lo

wte

mpe

ratu

re v

alue

und

er w

hich

page

r 1 is

to b

e act

ivat

ed.

Pres

s the

[Ent

er] k

ey to

con

firm

or

the

dow

n ar

row

key

to c

ance

l.

Low

Tem

pera

ture

Set

poin

t Scr

een

On If Alarm On YES

On if Sw1 Off-YES

On If ORP< 630

On If ORP> 770

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0<

On If Temp> 104.0

Off if Sw1 Off-NO

On if Sw2 Off-NO

On If Overfeed YES

On DELAY 00:10:00

On Time 00:00:02

MinTimeOff 12:00:00

To

Pag

er 1

(2 o

f 2)

Bac

k

Pag

er 1

, Hig

h O

RP

Set

poin

t

Ent

er

Hig

h O

RP

Set

poin

t Scr

een

Enter new value

Current: 770

770

v-Cancel ^

Use

the

keyp

ad to

ent

er th

e hi

ghO

RP

valu

e ov

er w

hich

pag

er 1

is to

be a

ctiv

ated

.Pr

ess t

he [E

nter

] key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

On If Alarm On YES

On if Sw1 Off-YES

On If ORP< 630

On If ORP> 770<

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0

Off if Sw1 Off-NO

On if Sw2 Off-NO

On If Overfeed YES

On DELAY 00:10:00

On Time 00:00:02

MinTimeOff 12:00:00

AK

110

Pro

gram

min

g S

cree

n N

avig

atio

n, P

ager

1, R

ev 3

22 A

ug 2

008

101

pH

> 7.67-OFF 7.50s

ORP 490 -OFF 700s

_____

69.0f SW1OFFSW2OFF

Mai

n S

tatu

s S

cree

n Name:Main Pool

System

>Programming

Service

Data ( 8:441 )

Communications

Security Setup

Wizards

Serial # 123456

Con

figur

atio

n M

enu,

Pro

gram

min

g

AK

110

Pro

gram

min

g S

cree

n N

avig

atio

n, P

ager

1 (1

of 2

)

Ent

erB

ack

1:pH, Mix Time

2:ORP, Mix Time

3:Not Used

A:Alarm

>P:Pager1

P:Pager2

P:Pager3

P:Pager4

Pro

gram

ming

Set

up S

cree

n

Pag

er 1

, On

if P

anel

Ala

rm is

On

Ent

erB

ack

Pag

er 1

, On

if S

W1

is O

ff

Pag

er 1

, Low

OR

P S

etpo

int

Pag

er 1

, Not

On

if Pan

el A

larm

is O

n

Pres

s the

[Ent

er] k

ey to

cho

ose

whe

ther

pag

er 1

is to

be

used

whe

nth

e A

K11

0 fr

ont p

anel

ala

rmin

dica

tor i

s on

.

Ent

er

Pag

er 1

, Not

On

if S

W1

is O

ff

Ent

er

Enter new value

Current: 630

630

v-Cancel ^

Use

the

keyp

ad to

ent

er th

e lo

wO

RP

valu

e un

der w

hich

pag

er 1

is to

be a

ctiv

ated

.Pr

ess t

he [E

nter

] key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

Ent

er

Low

OR

P S

etpo

int S

cree

n

Ent

er

Pag

er 1

, High

pH

Set

poin

tEnter new value

Current: 8.00

8.00

v-Cancel ^

Use

the

keyp

ad to

ent

er th

e hi

gh p

Hva

lue

over

whi

ch pa

ger 1

is to

be

activ

ated

.Pr

ess t

he [E

nter

] key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

Hig

h pH

Set

poin

t Scr

een

Not

e:

The

Prog

ram

min

g Se

tup

Scre

endi

spla

ys fo

ur p

agers

whe

n a

dial

-up

mod

em (o

r no

mod

em a

t all)

isin

stal

led

in th

e co

ntro

ller.

The

optio

ns a

vaila

ble

on th

e Pa

ger

1 Sc

reen

pro

gram

min

g men

u m

ayva

ry in

acc

orda

nce

with

the

chos

enco

nfig

urat

ions

for r

elay

s 1

and

2.

The

prog

ram

min

g m

enus

for p

ager

s2,

3 a

nd 4

are

iden

tical

to th

at o

fpa

ger 1

.

If a

cel

lula

r mod

em is

inst

alle

d in

the

cont

rolle

r, th

ese fo

ur p

ager

s ar

ere

plac

ed w

ith si

mila

r E-m

ail

prog

ram

min

g m

enus

.

On If Alarm On YES<

On if Sw1 Off-YES

On If ORP< 630

On If ORP> 770

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0

Off if Sw1 Off-NO

On if Sw2 Off-NO

On If Overfeed YES

On DELAY 00:10:00

On Time 00:00:02

MinTimeOff 12:00:00

On If Alarm On NO <

On if Sw1 Off-YES

On If ORP< 630

On If ORP> 770

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0

Off if Sw1 Off-NO

On if Sw2 On –NO

On if Sw2 Off-NO

On If Overfeed YES

On DELAY 00:10:00

On Time 00:00:02

MinTimeOff 12:00:00

On If Alarm On YES

On if Sw1 Off-YES <

On If ORP< 630

On If ORP> 770

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0

Off if Sw1 Off-NO

On if Sw2 Off-NO

On If Overfeed YES

On DELAY 00:10:00

On Time 00:00:02

MinTimeOff 12:00:00

On If Alarm On YES

On if Sw1 Off-NO <

On If ORP< 630

On If ORP> 770

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0

Off if Sw1 Off-NO

On if Sw2 Off-NO

On If Overfeed YES

On DELAY 00:10:00

On Time 00:00:02

MinTimeOff 12:00:00

On If Alarm On YES

On if Sw1 Off-YES

On If ORP< 630<

On If ORP> 770

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0

Off if Sw1 Off-NO

On if Sw2 Off-NO

On If Overfeed YES

On DELAY 00:10:00

On Time 00:00:02

MinTimeOff 12:00:00

Pres

s the

[Ent

er] k

ey to

cho

ose

whe

ther

pag

er 1

is to

be

used

whe

nth

e flo

w sw

itch

SW1

is o

ff.

On If Alarm On YES

On if Sw1 Off-YES

On If ORP< 630

On If ORP> 770

On If pH> 8.00<

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0

Off if Sw1 Off-NO

On if Sw2 Off-NO

On If Overfeed YES

On DELAY 00:10:00

On Time 00:00:02

MinTimeOff 12:00:00

Ent

er

Pag

er 1

, Low

pH

Set

poin

tEnter new value

Current: 7.00

7.00

v-Cancel ^

Use

the

keyp

ad to

ent

er th

e lo

w p

Hva

lue

unde

r whi

ch pa

ger 1

is to

be

activ

ated

.Pr

ess t

he [E

nter

] key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

Low

pH

Set

poin

t Scr

een

On If Alarm On YES

On if Sw1 Off-YES

On If ORP< 630

On If ORP> 770

On If pH> 8.00

On If pH< 7.00<

On If Temp< 32.0

On If Temp> 104.0

Off if Sw1 Off-NO

On if Sw2 Off-NO

On If Overfeed YES

On DELAY 00:10:00

On Time 00:00:02

MinTimeOff 12:00:00

Ent

er

Pag

er 1

, Low

Tem

pera

ture

Set

poin

tEnter new value

Current: 32.0

32.0

v-Cancel ^

Use

the

keyp

ad to

ent

er th

e lo

wte

mpe

ratu

re v

alue

und

er w

hich

page

r 1 is

to b

e act

ivat

ed.

Pres

s the

[Ent

er] k

ey to

con

firm

or

the

dow

n ar

row

key

to c

ance

l.

Low

Tem

pera

ture

Set

poin

t Scr

een

On If Alarm On YES

On if Sw1 Off-YES

On If ORP< 630

On If ORP> 770

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0<

On If Temp> 104.0

Off if Sw1 Off-NO

On if Sw2 Off-NO

On If Overfeed YES

On DELAY 00:10:00

On Time 00:00:02

MinTimeOff 12:00:00

To

Pag

er 1

(2 o

f 2)

Bac

k

Pag

er 1

, Hig

h O

RP

Set

poin

t

Ent

er

Hig

h O

RP

Set

poin

t Scr

een

Enter new value

Current: 770

770

v-Cancel ^

Use

the

keyp

ad to

ent

er th

e hi

ghO

RP

valu

e ov

er w

hich

pag

er 1

is to

be a

ctiv

ated

.Pr

ess t

he [E

nter

] key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

On If Alarm On YES

On if Sw1 Off-YES

On If ORP< 630

On If ORP> 770<

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0

Off if Sw1 Off-NO

On if Sw2 Off-NO

On If Overfeed YES

On DELAY 00:10:00

On Time 00:00:02

MinTimeOff 12:00:00

AK

110

Pro

gram

min

g S

cree

n N

avig

atio

n, P

ager

1, R

ev 3

22 A

ug 2

008

102

AK

110

Pro

gram

min

g S

cree

n N

avig

atio

n, P

ager

1 (2

of 2

)

Use

the

keyp

ad to

ent

er th

e tim

ede

lay

betw

een

the a

larm

trig

ger a

ndth

e ac

tivia

tion

of p

ager

1.

Pres

s the

[Ent

er] k

ey to

con

firm

or

the

dow

n ar

row

key

to c

ance

l.

Del

ay T

ime

Scr

een

Enter new value

Current: 00:10:00

00:10:00

v-Cancel ^

Ent

er

Pag

er 1

, Del

ay T

ime

On If Alarm On YES

On if Sw1 Off-YES

On If ORP< 630

On If ORP> 770

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0

Off if Sw1 Off-NO

On if Sw2 Off-NO

On If Overfeed YES

On DELAY 00:10:00<

On Time 00:00:02

MinTimeOff 12:00:00

Pag

er 1

, On

if SW

2 is

Off

Ent

er

Pag

er 1

, Not

On

if SW

2 is

Off

On If Alarm On YES

On if Sw1 Off-YES

On If ORP< 630

On If ORP> 770

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0

Off if Sw1 Off-NO

On if Sw2 Off-NO <

On If Overfeed YES

On DELAY 00:10:00

On Time 00:00:02

MinTimeOff 12:00:00

On If Alarm On YES

On if Sw1 Off-YES

On If ORP< 630

On If ORP> 770

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0

Off if Sw1 Off-NO

On if Sw2 Off-YES <

On If Overfeed YES

On DELAY 00:10:00

On Time 00:00:02

MinTimeOff 12:00:00

Pres

s the

[Ente

r] k

ey to

cho

ose

whe

ther

pag

er 1

is to

be

used

whe

nsw

itch

2 (S

W2)

is o

ff.

Pag

er 1

, Not

On i

f Ove

rfee

d O

ccur

s

Ent

er

Pag

er 1

, On

if Ove

rfee

d O

ccur

sOn If Alarm On YES

On if Sw1 Off-YES

On If ORP< 630

On If ORP> 770

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0

Off if Sw1 Off-NO

On if Sw2 Off-NO

On If Overfeed YES<

On DELAY 00:10:00

On Time 00:00:02

MinTimeOff 12:00:00

On If Alarm On YES

On if Sw1 Off-YES

On If ORP< 630

On If ORP> 770

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0

Off if Sw1 Off-NO

On if Sw2 Off-NO

On If Overfeed NO<

On DELAY 00:10:00

On Time 00:00:02

MinTimeOff 12:00:00

Pres

s the

[Ente

r] k

ey to

cho

ose

whe

ther

pag

er 1

is to

be

used

whe

nan

ove

rfee

d con

ditio

n oc

curs

.

Pag

er 1

, On

Tim

eOn If Alarm On YES

On if Sw1 Off-YES

On If ORP< 630

On If ORP> 770

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0

Off if Sw1 Off-NO

On if Sw2 Off-NO

On If Overfeed YES

On DELAY 00:10:00

On Time 00:00:02<

MinTimeOff 12:00:00

Use

the

keyp

ad to

ent

er th

e am

ount

of ti

me

page

r 1 is

to b

e ac

tive

once

an a

larm

con

ditio

n oc

curs

.Pr

ess t

he [E

nter]

key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

On

Tim

e S

cree

nEnter new value

Current: 00:00:02

00:00:02

v-Cancel ^

Ent

er

Pag

er 1

, Min

imum

Tim

e O

ffOn If Alarm On YES

On if Sw1 Off-YES

On If ORP< 630

On If ORP> 770

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0

Off if Sw1 Off-NO

On if Sw2 Off-NO

On If Overfeed YES

On DELAY 00:10:00

On Time 00:00:02


Use

the

keyp

ad to

ent

er th

e am

ount

of ti

me

page

r 1 is

to b

e in

activ

eon

ce a

n al

arm

con

ditio

n is

fixe

d.Pr

ess t

he [E

nter]

key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

Min

imum

Tim

e O

ff S

cree

nEnter new value

Current: 12:00:00

12:00:00

v-Cancel ^

Ent

er

Fro

m P

ager

1 (1

of 2

)

Ent

er

Pag

er 1

, Hig

h T

empe

ratu

re S

etpo

int

Enter new value

Current: 104.0

104.0

v-Cancel ^

Use

the

keyp

ad to

ent

er th

e hi

ghte

mpe

ratu

re v

alue

ove

r whi

ch p

ager

1 is

to b

e ac

tivat

ed.

Pres

s the

[Ent

er] k

ey to

con

firm

or

the

dow

n ar

row

key

to c

ance

l.

Hig

h Te

mpe

ratu

re S

etpo

int S

cree

nOn If Alarm On YES

On if Sw1 Off-YES

On If ORP< 630

On If ORP> 770

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0<

Off if Sw1 Off-NO

On if Sw2 Off-NO

On If Overfeed YES

On DELAY 00:10:00

On Time 00:00:02

MinTimeOff 12:00:00

Pag

er 1

, Off

if S

W1

is O

ff

Ent

er

Pag

er 1

, Not

Off

if S

W1

is O


On if Sw1 Off-YES

On If ORP< 630

On If ORP> 770

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0

Off if Sw1 Off-NO <

On if Sw2 Off-NO

On If Overfeed YES

On DELAY 00:10:00

On Time 00:00:02

MinTimeOff 12:00:00

On If Alarm On YES

On if Sw1 Off-YES

On If ORP< 630

On If ORP> 770

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0


On if Sw2 Off-NO

On If Overfeed YES

On DELAY 00:10:00

On Time 00:00:02

MinTimeOff 12:00:00

Pres

s the

[Ente

r] k

ey to

cho

ose

whe

ther

pag

er 1

is to

be

used

whe

nth

e flo

w sw

itch

SW1

is o

ff.

AK

110

Pro

gram

min

g S

cree

n N

avig

atio

n, P

ager

1, R

ev 3

22 A

ug 2

008

103

AK

110

Pro

gram

min

g S

cree

n N

avig

atio

n, P

ager

1 (2

of 2

)

Use

the

keyp

ad to

ent

er th

e tim

ede

lay

betw

een

the a

larm

trig

ger a

ndth

e ac

tivia

tion

of p

ager

1.

Pres

s the

[Ent

er] k

ey to

con

firm

or

the

dow

n ar

row

key

to c

ance

l.

Del

ay T

ime

Scr

een

Enter new value

Current: 00:10:00

00:10:00

v-Cancel ^

Ent

er

Pag

er 1

, Del

ay T

ime

On If Alarm On YES

On if Sw1 Off-YES

On If ORP< 630

On If ORP> 770

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0

Off if Sw1 Off-NO

On if Sw2 Off-NO

On If Overfeed YES

On DELAY 00:10:00<

On Time 00:00:02

MinTimeOff 12:00:00

Pag

er 1

, On

if SW

2 is

Off

Ent

er

Pag

er 1

, Not

On

if SW

2 is

Off

On If Alarm On YES

On if Sw1 Off-YES

On If ORP< 630

On If ORP> 770

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0

Off if Sw1 Off-NO

On if Sw2 Off-NO <

On If Overfeed YES

On DELAY 00:10:00

On Time 00:00:02

MinTimeOff 12:00:00

On If Alarm On YES

On if Sw1 Off-YES

On If ORP< 630

On If ORP> 770

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0

Off if Sw1 Off-NO

On if Sw2 Off-YES <

On If Overfeed YES

On DELAY 00:10:00

On Time 00:00:02

MinTimeOff 12:00:00

Pres

s the

[Ente

r] k

ey to

cho

ose

whe

ther

pag

er 1

is to

be

used

whe

nsw

itch

2 (S

W2)

is o

ff.

Pag

er 1

, Not

On i

f Ove

rfee

d O

ccur

s

Ent

er

Pag

er 1

, On

if Ove

rfee

d O

ccur

sOn If Alarm On YES

On if Sw1 Off-YES

On If ORP< 630

On If ORP> 770

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0

Off if Sw1 Off-NO

On if Sw2 Off-NO

On If Overfeed YES<

On DELAY 00:10:00

On Time 00:00:02

MinTimeOff 12:00:00

On If Alarm On YES

On if Sw1 Off-YES

On If ORP< 630

On If ORP> 770

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0

Off if Sw1 Off-NO

On if Sw2 Off-NO

On If Overfeed NO<

On DELAY 00:10:00

On Time 00:00:02

MinTimeOff 12:00:00

Pres

s the

[Ente

r] k

ey to

cho

ose

whe

ther

pag

er 1

is to

be

used

whe

nan

ove

rfee

d con

ditio

n oc

curs

.

Pag

er 1

, On

Tim

eOn If Alarm On YES

On if Sw1 Off-YES

On If ORP< 630

On If ORP> 770

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0

Off if Sw1 Off-NO

On if Sw2 Off-NO

On If Overfeed YES

On DELAY 00:10:00

On Time 00:00:02<

MinTimeOff 12:00:00

Use

the

keyp

ad to

ent

er th

e am

ount

of ti

me

page

r 1 is

to b

e ac

tive

once

an a

larm

con

ditio

n oc

curs

.Pr

ess t

he [E

nter]

key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

On

Tim

e S

cree

nEnter new value

Current: 00:00:02

00:00:02

v-Cancel ^

Ent

er

Pag

er 1

, Min

imum

Tim

e O


On if Sw1 Off-YES

On If ORP< 630

On If ORP> 770

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0

Off if Sw1 Off-NO

On if Sw2 Off-NO

On If Overfeed YES

On DELAY 00:10:00

On Time 00:00:02


Use

the

keyp

ad to

ent

er th

e am

ount

of ti

me

page

r 1 is

to b

e in

activ

eon

ce a

n al

arm

con

ditio

n is

fixe

d.Pr

ess t

he [E

nter]

key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

Min

imum

Tim

e O

ff S

cree

nEnter new value

Current: 12:00:00

12:00:00

v-Cancel ^

Ent

er

Fro

m P

ager

1 (1

of 2

)

Ent

er

Pag

er 1

, Hig

h T

empe

ratu

re S

etpo

int

Enter new value

Current: 104.0

104.0

v-Cancel ^

Use

the

keyp

ad to

ent

er th

e hi

ghte

mpe

ratu

re v

alue

ove

r whi

ch p

ager

1 is

to b

e ac

tivat

ed.

Pres

s the

[Ent

er] k

ey to

con

firm

or

the

dow

n ar

row

key

to c

ance

l.

Hig

h Te

mpe

ratu

re S

etpo

int S

cree

nOn If Alarm On YES

On if Sw1 Off-YES

On If ORP< 630

On If ORP> 770

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0<

Off if Sw1 Off-NO

On if Sw2 Off-NO

On If Overfeed YES

On DELAY 00:10:00

On Time 00:00:02

MinTimeOff 12:00:00

Pag

er 1

, Off

if S

W1

is O

ff

Ent

er

Pag

er 1

, Not

Off

if S

W1

is O


On if Sw1 Off-YES

On If ORP< 630

On If ORP> 770

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0

Off if Sw1 Off-NO <

On if Sw2 Off-NO

On If Overfeed YES

On DELAY 00:10:00

On Time 00:00:02

MinTimeOff 12:00:00

On If Alarm On YES

On if Sw1 Off-YES

On If ORP< 630

On If ORP> 770

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0


On if Sw2 Off-NO

On If Overfeed YES

On DELAY 00:10:00

On Time 00:00:02

MinTimeOff 12:00:00

Pres

s the

[Ente

r] k

ey to

cho

ose

whe

ther

pag

er 1

is to

be

used

whe

nth

e flo

w sw

itch

SW1

is o

ff.

AK

110

Pro

gram

min

g S

cree

n N

avig

atio

n, P

ager

1, R

ev 3

22 A

ug 2

008

104

pH

> 7.67-OFF 7.50s

ORP 490 -OFF 700s

_____

69.0f SW1OFFSW2OFF

Mai

n St

atus

Scr

een

Name:Main Pool

System

>Programming

Service

Data ( 8:441 )

Communications

Security Setup

Wizards

Serial # 123456

Con

figur

atio

n M

enu,

Pro

gram

min

g

AK

110

Pro

gram

min

g S

cree

n N

avig

atio

n, E

-mai

l 1 (1

of 2

)

Ent

erB

ack

1:pH, Mix Time

2:ORP, Mix Time

3:Not Used

A:Alarm

>P:Pager1

P:Pager2

P:Pager3

P:Pager4

Pro

gram

min

g S

etup

Scr

een

E-m

ail 1

, On

if P

anel

Ala

rm is

On

Ent

erB

ack

E-m

ail 1

, On

if SW

1 is

Off

E-m

ail 1

, Low

OR

P S

etpo

int

E-m

ail 1

, Not

On

if P

anel

Ala

rm is

On

Pres

s the

[Ente

r] k

ey to

cho

ose

whe

ther

e-m

ail 1

is to

be

used

whe

nth

e A

K11

0 fr

ont p

anel

ala

rmin

dica

tor i

s on

.

Ent

er

E-m

ail 1

, Not

On

if S

W1

is O

ff

Ent

er

Enter new value

Current: 630

630

v-Cancel ^

Use

the

keyp

ad to

ent

er th

e lo

wO

RP

valu

e un

der w

hich

e-m

ail 1

isto

be

activ

ated

.Pr

ess t

he [E

nter]

key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

Ent

er

Low

OR

P S

etpo

int S

cree

n

Ent

er

E-m

ail 1

, Hig

h pH

Set

poin

tEnter new value

Current: 8.00

8.00

v-Cancel ^

Use

the

keyp

ad to

ent

er th

e hi

gh p

Hva

lue

over

whi

ch e

-mai

l 1 is

to b

eac

tivat

ed.

Pres

s the

[Ent

er] k

ey to

con

firm

or

the

dow

n ar

row

key

to c

ance

l.

Hig

h pH

Set

poin

t Scr

een

Not

e:

The

Prog

ram

min

g Se

tup

Scre

endi

spla

ys fo

ur e

-mai

ls w

hen

a ce

llula

rm

odem

is in

stal

led in

the

cont

rolle

r.

The

optio

ns a

vaila

ble

on th

e E-

mai

l1

Scre

en p

rogr

amm

ing

men

u m

ayva

ry in

acc

orda

nce

with

the

chos

enco

nfig

urat

ions

for r

elay

s 1

and

2.

The

prog

ram

min

g men

us fo

r e-m

ail

2, 3

and

4 a

re id

entic

al to

that

of e

-m

ail 1

.

If a

dia

l-up

mod

em (o

r no

mod

em a

tal

l) is

inst

alle

d in

the

cont

rolle

r,th

ese

four

e-m

ails

are

repl

aced

with

sim

ilar P

ager

pro

gram

min

g m

enus

.

E-m

ail 1

, Hig

h O

RP

Set

poin

t

Ent

er

Hig

h O

RP

Set

poin

t Scr

een

On If Alarm On YES<

On if Sw1 Off-YES

On If ORP< 630

On If ORP> 770

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0

Off if Sw1 Off-NO

On if Sw2 Off-NO

On If Overfeed YES

On DELAY 00:10:00

On Time 00:00:02

MinTimeOff 12:00:00

On If Alarm On NO <

On if Sw1 Off-YES

On If ORP< 630

On If ORP> 770

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0

Off if Sw1 Off-NO

On if Sw2 Off-NO

On If Overfeed YES

On DELAY 00:10:00

On Time 00:00:02

MinTimeOff 12:00:00

On If Alarm On YES

On if Sw1 Off-YES <

On If ORP< 630

On If ORP> 770

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0

Off if Sw1 Off-NO

On if Sw2 Off-NO

On If Overfeed YES

On DELAY 00:10:00

On Time 00:00:02

MinTimeOff 12:00:00

On If Alarm On YES

On if Sw1 Off-NO <

On If ORP< 630

On If ORP> 770

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0

Off if Sw1 Off-NO

On if Sw2 Off-NO

On If Overfeed YES

On DELAY 00:10:00

On Time 00:00:02

MinTimeOff 12:00:00

On If Alarm On YES

On if Sw1 Off-YES

On If ORP< 630<

On If ORP> 770

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0

Off if Sw1 Off-NO

On if Sw2 Off-NO

On If Overfeed YES

On DELAY 00:10:00

On Time 00:00:02

MinTimeOff 12:00:00

Pres

s the

[Ente

r] k

ey to

cho

ose

whe

ther

e-m

ail 1

is to

be

used

whe

nth

e flo

w sw

itch

SW1

is o

ff.

Enter new value

Current: 770

770

v-Cancel ^

Use

the

keyp

ad to

ent

er th

e hi

ghO

RP

valu

e ov

er w

hich

e-m

ail 1

is to

be a

ctiv

ated

.Pr

ess t

he [E

nter]

key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

On If Alarm On YES

On if Sw1 Off-YES

On If ORP< 630

On If ORP> 770<

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0

Off if Sw1 Off-NO

On if Sw2 Off-NO

On If Overfeed YES

On DELAY 00:10:00

On Time 00:00:02

MinTimeOff 12:00:00

On If Alarm On YES

On if Sw1 Off-YES

On If ORP< 630

On If ORP> 770

On If pH> 8.00<

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0

Off if Sw1 Off-NO

On if Sw2 Off-NO

On If Overfeed YES

On DELAY 00:10:00

On Time 00:00:02

MinTimeOff 12:00:00

Ent

er

E-m

ail 1

, Low

pH

Set

poin

tEnter new value

Current: 7.00

7.00

v-Cancel ^

Use

the

keyp

ad to

ent

er th

e lo

w p

Hva

lue

unde

r whi

ch e

-mai

l 1 is

to b

eac

tivat

ed.

Pres

s the

[Ent

er] k

ey to

con

firm

or

the

dow

n ar

row

key

to c

ance

l.

Low

pH

Set

poin

t Scr

een

On If Alarm On YES

On if Sw1 Off-YES

On If ORP< 630

On If ORP> 770

On If pH> 8.00

On If pH< 7.00<

On If Temp< 32.0

On If Temp> 104.0

Off if Sw1 Off-NO

On if Sw2 Off-NO

On If Overfeed YES

On DELAY 00:10:00

On Time 00:00:02

MinTimeOff 12:00:00

Ent

er

E-m

ail 1

, Low

Tem

pera

ture

Set

poin

tEnter new value

Current: 32.0

32.0

v-Cancel ^

Use

the

keyp

ad to

ent

er th

e lo

wte

mpe

ratu

re v

alue

und

er w

hich

e-

mai

l 1 is

to b

e ac

tivat

ed.

Pres

s the

[Ent

er] k

ey to

con

firm

or

the

dow

n ar

row

key

to c

ance

l.

Low

Tem

pera

ture

Set

poin

t Scr

een

On If Alarm On YES

On if Sw1 Off-YES

On If ORP< 630

On If ORP> 770

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0<

On If Temp> 104.0

Off if Sw1 Off-NO

On if Sw2 Off-NO

On If Overfeed YES

On DELAY 00:10:00

On Time 00:00:02

MinTimeOff 12:00:00

To

E-m

ail 1

(2 o

f 2)

Bac

k

AK

110

Pro

gram

min

g S

cree

n N

avig

atio

n, E

-mai

l 1, R

ev 3

22 A

ug 2

00810.22

105

pH

> 7.67-OFF 7.50s

ORP 490 -OFF 700s

_____

69.0f SW1OFFSW2OFF

Mai

n St

atus

Scr

een

Name:Main Pool

System

>Programming

Service

Data ( 8:441 )

Communications

Security Setup

Wizards

Serial # 123456

Con

figur

atio

n M

enu,

Pro

gram

min

g

AK

110

Pro

gram

min

g S

cree

n N

avig

atio

n, E

-mai

l 1 (1

of 2

)

Ent

erB

ack

1:pH, Mix Time

2:ORP, Mix Time

3:Not Used

A:Alarm

>P:Pager1

P:Pager2

P:Pager3

P:Pager4

Pro

gram

min

g S

etup

Scr

een

E-m

ail 1

, On

if P

anel

Ala

rm is

On

Ent

erB

ack

E-m

ail 1

, On

if SW

1 is

Off

E-m

ail 1

, Low

OR

P S

etpo

int

E-m

ail 1

, Not

On

if P

anel

Ala

rm is

On

Pres

s the

[Ente

r] k

ey to

cho

ose

whe

ther

e-m

ail 1

is to

be

used

whe

nth

e A

K11

0 fr

ont p

anel

ala

rmin

dica

tor i

s on

.

Ent

er

E-m

ail 1

, Not

On

if S

W1

is O

ff

Ent

er

Enter new value

Current: 630

630

v-Cancel ^

Use

the

keyp

ad to

ent

er th

e lo

wO

RP

valu

e un

der w

hich

e-m

ail 1

isto

be

activ

ated

.Pr

ess t

he [E

nter]

key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

Ent

er

Low

OR

P S

etpo

int S

cree

n

Ent

er

E-m

ail 1

, Hig

h pH

Set

poin

tEnter new value

Current: 8.00

8.00

v-Cancel ^

Use

the

keyp

ad to

ent

er th

e hi

gh p

Hva

lue

over

whi

ch e

-mai

l 1 is

to b

eac

tivat

ed.

Pres

s the

[Ent

er] k

ey to

con

firm

or

the

dow

n ar

row

key

to c

ance

l.

Hig

h pH

Set

poin

t Scr

een

Not

e:

The

Prog

ram

min

g Se

tup

Scre

endi

spla

ys fo

ur e

-mai

ls w

hen

a ce

llula

rm

odem

is in

stal

led in

the

cont

rolle

r.

The

optio

ns a

vaila

ble

on th

e E-

mai

l1

Scre

en p

rogr

amm

ing

men

u m

ayva

ry in

acc

orda

nce

with

the

chos

enco

nfig

urat

ions

for r

elay

s 1

and

2.

The

prog

ram

min

g men

us fo

r e-m

ail

2, 3

and

4 a

re id

entic

al to

that

of e

-m

ail 1

.

If a

dia

l-up

mod

em (o

r no

mod

em a

tal

l) is

inst

alle

d in

the

cont

rolle

r,th

ese

four

e-m

ails

are

repl

aced

with

sim

ilar P

ager

pro

gram

min

g m

enus

.

E-m

ail 1

, Hig

h O

RP

Set

poin

t

Ent

er

Hig

h O

RP

Set

poin

t Scr

een

On If Alarm On YES<

On if Sw1 Off-YES

On If ORP< 630

On If ORP> 770

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0

Off if Sw1 Off-NO

On if Sw2 Off-NO

On If Overfeed YES

On DELAY 00:10:00

On Time 00:00:02

MinTimeOff 12:00:00

On If Alarm On NO <

On if Sw1 Off-YES

On If ORP< 630

On If ORP> 770

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0

Off if Sw1 Off-NO

On if Sw2 Off-NO

On If Overfeed YES

On DELAY 00:10:00

On Time 00:00:02

MinTimeOff 12:00:00

On If Alarm On YES

On if Sw1 Off-YES <

On If ORP< 630

On If ORP> 770

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0

Off if Sw1 Off-NO

On if Sw2 Off-NO

On If Overfeed YES

On DELAY 00:10:00

On Time 00:00:02

MinTimeOff 12:00:00

On If Alarm On YES

On if Sw1 Off-NO <

On If ORP< 630

On If ORP> 770

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0

Off if Sw1 Off-NO

On if Sw2 Off-NO

On If Overfeed YES

On DELAY 00:10:00

On Time 00:00:02

MinTimeOff 12:00:00

On If Alarm On YES

On if Sw1 Off-YES

On If ORP< 630<

On If ORP> 770

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0

Off if Sw1 Off-NO

On if Sw2 Off-NO

On If Overfeed YES

On DELAY 00:10:00

On Time 00:00:02

MinTimeOff 12:00:00

Pres

s the

[Ente

r] k

ey to

cho

ose

whe

ther

e-m

ail 1

is to

be

used

whe

nth

e flo

w sw

itch

SW1

is o

ff.

Enter new value

Current: 770

770

v-Cancel ^

Use

the

keyp

ad to

ent

er th

e hi

ghO

RP

valu

e ov

er w

hich

e-m

ail 1

is to

be a

ctiv

ated

.Pr

ess t

he [E

nter]

key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

On If Alarm On YES

On if Sw1 Off-YES

On If ORP< 630

On If ORP> 770<

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0

Off if Sw1 Off-NO

On if Sw2 Off-NO

On If Overfeed YES

On DELAY 00:10:00

On Time 00:00:02

MinTimeOff 12:00:00

On If Alarm On YES

On if Sw1 Off-YES

On If ORP< 630

On If ORP> 770

On If pH> 8.00<

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0

Off if Sw1 Off-NO

On if Sw2 Off-NO

On If Overfeed YES

On DELAY 00:10:00

On Time 00:00:02

MinTimeOff 12:00:00

Ent

er

E-m

ail 1

, Low

pH

Set

poin

tEnter new value

Current: 7.00

7.00

v-Cancel ^

Use

the

keyp

ad to

ent

er th

e lo

w p

Hva

lue

unde

r whi

ch e

-mai

l 1 is

to b

eac

tivat

ed.

Pres

s the

[Ent

er] k

ey to

con

firm

or

the

dow

n ar

row

key

to c

ance

l.

Low

pH

Set

poin

t Scr

een

On If Alarm On YES

On if Sw1 Off-YES

On If ORP< 630

On If ORP> 770

On If pH> 8.00

On If pH< 7.00<

On If Temp< 32.0

On If Temp> 104.0

Off if Sw1 Off-NO

On if Sw2 Off-NO

On If Overfeed YES

On DELAY 00:10:00

On Time 00:00:02

MinTimeOff 12:00:00

Ent

er

E-m

ail 1

, Low

Tem

pera

ture

Set

poin

tEnter new value

Current: 32.0

32.0

v-Cancel ^

Use

the

keyp

ad to

ent

er th

e lo

wte

mpe

ratu

re v

alue

und

er w

hich

e-

mai

l 1 is

to b

e ac

tivat

ed.

Pres

s the

[Ent

er] k

ey to

con

firm

or

the

dow

n ar

row

key

to c

ance

l.

Low

Tem

pera

ture

Set

poin

t Scr

een

On If Alarm On YES

On if Sw1 Off-YES

On If ORP< 630

On If ORP> 770

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0<

On If Temp> 104.0

Off if Sw1 Off-NO

On if Sw2 Off-NO

On If Overfeed YES

On DELAY 00:10:00

On Time 00:00:02

MinTimeOff 12:00:00

To

E-m

ail 1

(2 o

f 2)

Bac

k

AK

110

Pro

gram

min

g S

cree

n N

avig

atio

n, E

-mai

l 1, R

ev 3

22 A

ug 2

008

106

AK

110

Pro

gram

min

g S

cree

n N

avig

atio

n, E

-mai

l 1 (2

of 2

)

Use

the

keyp

ad to

ent

er th

e tim

ede

lay

betw

een

the a

larm

trig

ger a

ndth

e ac

tivia

tion

of e

-mai

l 1.

Pres

s the

[Ent

er] k

ey to

con

firm

or

the

dow

n ar

row

key

to c

ance

l.

Del

ay T

ime

Scr

een

Enter new value

Current: 00:10:00

00:10:00

v-Cancel ^

Ent

er

E-m

ail 1

, Del

ay T

ime

On If Alarm On YES

On if Sw1 Off-YES

On If ORP< 630

On If ORP> 770

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0

Off if Sw1 Off-NO

On if Sw2 Off-NO

On If Overfeed YES

On DELAY 00:10:00<

On Time 00:00:02

MinTimeOff 12:00:00

E-m

ail 1

, On

if SW

2 is

Off

Ent

er

E-m

ail 1

, Not

On

if S

W2

is O


On if Sw1 Off-YES

On If ORP< 630

On If ORP> 770

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0

Off if Sw1 Off-NO

On if Sw2 Off-NO <

On If Overfeed YES

On DELAY 00:10:00

On Time 00:00:02

MinTimeOff 12:00:00

On If Alarm On YES

On if Sw1 Off-YES

On If ORP< 630

On If ORP> 770

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0

Off if Sw1 Off-NO

On if Sw2 Off-YES <

On If Overfeed YES

On DELAY 00:10:00

On Time 00:00:02

MinTimeOff 12:00:00

Pres

s the

[Ente

r] k

ey to

cho

ose

whe

ther

e-m

ail 1

is to

be

used

whe

nsw

itch

2 (S

W2)

is o

ff.

E-m

ail 1

, Not

On

if O

verf

eed

Occ

urs

Ent

er

E-m

ail 1

, On

if O

verf

eed

Occ

urs

On If Alarm On YES

On if Sw1 Off-YES

On If ORP< 630

On If ORP> 770

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0

Off if Sw1 Off-NO

On if Sw2 Off-NO

On If Overfeed YES<

On DELAY 00:10:00

On Time 00:00:02

MinTimeOff 12:00:00

On If Alarm On YES

On if Sw1 Off-YES

On If ORP< 630

On If ORP> 770

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0

Off if Sw1 Off-NO

On if Sw2 Off-NO

On If Overfeed NO<

On DELAY 00:10:00

On Time 00:00:02

MinTimeOff 12:00:00

Pres

s the

[Ente

r] k

ey to

cho

ose

whe

ther

e-m

ail 1

is to

be

used

whe

nan

ove

rfee

d con

ditio

n oc

curs

.

E-m

ail 1

, On

Tim

eOn If Alarm On YES

On if Sw1 Off-YES

On If ORP< 630

On If ORP> 770

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0

Off if Sw1 Off-NO

On if Sw2 Off-NO

On If Overfeed YES

On DELAY 00:10:00

On Time 00:00:02<

MinTimeOff 12:00:00

Use

the

keyp

ad to

ent

er th

e am

ount

of ti

me

e-m

ail 1

is to

be

activ

e on

cean

ala

rm c

ondi

tion

occu

rs.

Pres

s the

[Ent

er] k

ey to

con

firm

or

the

dow

n ar

row

key

to c

ance

l.

On

Tim

e S

cree

nEnter new value

Current: 00:00:02

00:00:02

v-Cancel ^

Ent

er

E-m

ail 1

, Min

imum

Tim

e O


On if Sw1 Off-YES

On If ORP< 630

On If ORP> 770

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0

Off if Sw1 Off-NO

On if Sw2 Off-NO

On If Overfeed YES

On DELAY 00:10:00

On Time 00:00:02


Use

the

keyp

ad to

ent

er th

e am

ount

of ti

me

e-m

ail 1

is to

be

inac

tive

once

an

alar

m c

ondi

tion

is fi

xed.

Pres

s the

[Ent

er] k

ey to

con

firm

or

the

dow

n ar

row

key

to c

ance

l.

Min

imum

Tim

e O

ff S

cree

nEnter new value

Current: 12:00:00

12:00:00

v-Cancel ^

Ent

er

From

E-m

ail 1

(1 o

f 2)

Ent

er

E-m

ail 1

, Hig

h T

empe

ratu

re S

etpo

int

Enter new value

Current: 104.0

104.0

v-Cancel ^

Use

the

keyp

ad to

ent

er th

e hi

ghte

mpe

ratu

re v

alue

ove

r whi

ch e

-mai

l1

is to

be

activ

ated

.Pr

ess t

he [E

nter]

key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

Hig

h Te

mpe

ratu

re S

etpo

int S

cree

nOn If Alarm On YES

On if Sw1 Off-YES

On If ORP< 630

On If ORP> 770

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0<

Off if Sw1 Off-NO

On if Sw2 Off-NO

On If Overfeed YES

On DELAY 00:10:00

On Time 00:00:02

MinTimeOff 12:00:00

E-m

ail 1

, Off

if S

W1

is O

ff

Ent

er

E-m

ail 1

, Not

Off

if S

W1

is O


On if Sw1 Off-YES

On If ORP< 630

On If ORP> 770

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0

Off if Sw1 Off-NO <

On if Sw2 Off-NO

On If Overfeed YES

On DELAY 00:10:00

On Time 00:00:02

MinTimeOff 12:00:00

On If Alarm On YES

On if Sw1 Off-YES

On If ORP< 630

On If ORP> 770

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0


On if Sw2 Off-NO

On If Overfeed YES

On DELAY 00:10:00

On Time 00:00:02

MinTimeOff 12:00:00

Pres

s the

[Ente

r] k

ey to

cho

ose

whe

ther

e-m

ail 1

is to

be

used

whe

nth

e flo

w sw

itch

SW1

is o

ff.

AK

110

Pro

gram

min

g S

cree

n N

avig

atio

n, E

-mai

l 1, R

ev 3

22 A

ug 2

008

107

AK

110

Pro

gram

min

g S

cree

n N

avig

atio

n, E

-mai

l 1 (2

of 2

)

Use

the

keyp

ad to

ent

er th

e tim

ede

lay

betw

een

the a

larm

trig

ger a

ndth

e ac

tivia

tion

of e

-mai

l 1.

Pres

s the

[Ent

er] k

ey to

con

firm

or

the

dow

n ar

row

key

to c

ance

l.

Del

ay T

ime

Scr

een

Enter new value

Current: 00:10:00

00:10:00

v-Cancel ^

Ent

er

E-m

ail 1

, Del

ay T

ime

On If Alarm On YES

On if Sw1 Off-YES

On If ORP< 630

On If ORP> 770

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0

Off if Sw1 Off-NO

On if Sw2 Off-NO

On If Overfeed YES

On DELAY 00:10:00<

On Time 00:00:02

MinTimeOff 12:00:00

E-m

ail 1

, On

if SW

2 is

Off

Ent

er

E-m

ail 1

, Not

On

if S

W2

is O


On if Sw1 Off-YES

On If ORP< 630

On If ORP> 770

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0

Off if Sw1 Off-NO

On if Sw2 Off-NO <

On If Overfeed YES

On DELAY 00:10:00

On Time 00:00:02

MinTimeOff 12:00:00

On If Alarm On YES

On if Sw1 Off-YES

On If ORP< 630

On If ORP> 770

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0

Off if Sw1 Off-NO

On if Sw2 Off-YES <

On If Overfeed YES

On DELAY 00:10:00

On Time 00:00:02

MinTimeOff 12:00:00

Pres

s the

[Ente

r] k

ey to

cho

ose

whe

ther

e-m

ail 1

is to

be

used

whe

nsw

itch

2 (S

W2)

is o

ff.

E-m

ail 1

, Not

On

if O

verf

eed

Occ

urs

Ent

er

E-m

ail 1

, On

if O

verf

eed

Occ

urs

On If Alarm On YES

On if Sw1 Off-YES

On If ORP< 630

On If ORP> 770

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0

Off if Sw1 Off-NO

On if Sw2 Off-NO

On If Overfeed YES<

On DELAY 00:10:00

On Time 00:00:02

MinTimeOff 12:00:00

On If Alarm On YES

On if Sw1 Off-YES

On If ORP< 630

On If ORP> 770

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0

Off if Sw1 Off-NO

On if Sw2 Off-NO

On If Overfeed NO<

On DELAY 00:10:00

On Time 00:00:02

MinTimeOff 12:00:00

Pres

s the

[Ente

r] k

ey to

cho

ose

whe

ther

e-m

ail 1

is to

be

used

whe

nan

ove

rfee

d con

ditio

n oc

curs

.

E-m

ail 1

, On

Tim

eOn If Alarm On YES

On if Sw1 Off-YES

On If ORP< 630

On If ORP> 770

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0

Off if Sw1 Off-NO

On if Sw2 Off-NO

On If Overfeed YES

On DELAY 00:10:00

On Time 00:00:02<

MinTimeOff 12:00:00

Use

the

keyp

ad to

ent

er th

e am

ount

of ti

me

e-m

ail 1

is to

be

activ

e on

cean

ala

rm c

ondi

tion

occu

rs.

Pres

s the

[Ent

er] k

ey to

con

firm

or

the

dow

n ar

row

key

to c

ance

l.

On

Tim

e S

cree

nEnter new value

Current: 00:00:02

00:00:02

v-Cancel ^

Ent

er

E-m

ail 1

, Min

imum

Tim

e O


On if Sw1 Off-YES

On If ORP< 630

On If ORP> 770

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0

Off if Sw1 Off-NO

On if Sw2 Off-NO

On If Overfeed YES

On DELAY 00:10:00

On Time 00:00:02


Use

the

keyp

ad to

ent

er th

e am

ount

of ti

me

e-m

ail 1

is to

be

inac

tive

once

an

alar

m c

ondi

tion

is fi

xed.

Pres

s the

[Ent

er] k

ey to

con

firm

or

the

dow

n ar

row

key

to c

ance

l.

Min

imum

Tim

e O

ff S

cree

nEnter new value

Current: 12:00:00

12:00:00

v-Cancel ^

Ent

er

From

E-m

ail 1

(1 o

f 2)

Ent

er

E-m

ail 1

, Hig

h T

empe

ratu

re S

etpo

int

Enter new value

Current: 104.0

104.0

v-Cancel ^

Use

the

keyp

ad to

ent

er th

e hi

ghte

mpe

ratu

re v

alue

ove

r whi

ch e

-mai

l1

is to

be

activ

ated

.Pr

ess t

he [E

nter]

key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

Hig

h Te

mpe

ratu

re S

etpo

int S

cree

nOn If Alarm On YES

On if Sw1 Off-YES

On If ORP< 630

On If ORP> 770

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0<

Off if Sw1 Off-NO

On if Sw2 Off-NO

On If Overfeed YES

On DELAY 00:10:00

On Time 00:00:02

MinTimeOff 12:00:00

E-m

ail 1

, Off

if S

W1

is O

ff

Ent

er

E-m

ail 1

, Not

Off

if S

W1

is O


On if Sw1 Off-YES

On If ORP< 630

On If ORP> 770

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0

Off if Sw1 Off-NO <

On if Sw2 Off-NO

On If Overfeed YES

On DELAY 00:10:00

On Time 00:00:02

MinTimeOff 12:00:00

On If Alarm On YES

On if Sw1 Off-YES

On If ORP< 630

On If ORP> 770

On If pH> 8.00

On If pH< 7.00

On If Temp< 32.0

On If Temp> 104.0


On if Sw2 Off-NO

On If Overfeed YES

On DELAY 00:10:00

On Time 00:00:02

MinTimeOff 12:00:00

Pres

s the

[Ente

r] k

ey to

cho

ose

whe

ther

e-m

ail 1

is to

be

used

whe

nth

e flo

w sw

itch

SW1

is o

ff.

AK

110

Pro

gram

min

g S

cree

n N

avig

atio

n, E

-mai

l 1, R

ev 3

22 A

ug 2

008

108

Name:Main Pool

System

Programming

Service

Data ( 8:441 )

Communications

Security Setup

>Wizards

Serial # 123456

Con

figur

ation

Men

u, W

izar

ds

AK

110

Wiz

ards

Set

up S

cree

n N

avig

atio

n (1

of 2

)

Ent

erB

ack

Wiz

ards

Set

up S

cree

n, R

elay

1>1:pH, Mix Time

2:ORP, Mix Time

3:Not Used

A:Alarm

P:Pager1

P:Pager2

P:Pager3

P:Pager4

Change Control Type

Press -> to toggle

control type

>pH, Mix Time

Cha

nge

Con

trol

Typ

e, R

elay

1Change Control Type

Press -> to toggle

control type

>pH, Cycle Time

Cha

nge

Con

trol

Typ

e, R

elay

1

-Confirm Changes

Clear existing setup

and Reassign

NO:7 9:YES

Cha

nge

Con

trol C

onfir

mat

ion

Scr

een

Pres

s the

[9] k

ey to

acc

ept t

he m

ost

rece

ntly

sele

cted

cont

rol t

ype

setti

ngs o

r the

[7] k

ey to

can

cel.

Ent

er

Pres

s the

righ

t arr

ow k

ey [>

] to

cycl

e th

roug

h th

e ava

ilabl

e co

ntro

lty

pe o

ptio

ns.

Wiz

ards

Set

up S

cree

n, R

elay

2 1:pH, Mix Time

>2:ORP, Mix Time

3:Not Used

A:Alarm

P:Pager1

P:Pager2

P:Pager3

P:Pager4

Change Control Type

Press -> to toggle

control type

>ORP, Mix Time

Cha

nge

Con

trol

Typ

e, R

elay


Press -> to toggle

control type

>ORP, Cycle Time

Cha

nge

Con

trol

Typ

e, R

elay

2

-Confirm Changes


and Reassign

NO:7 9:YES

Cha

nge

Con

trol C

onfir

mat

ion

Scr

een

Pres

s the

[9] k

ey to

acc

ept t

he m

ost

rece

ntly

sele

cted

cont

rol t

ype

setti

ngs o

r the

[7] k

ey to

can

cel.

Pres

s the

righ

t arr

ow k

ey [>

] to

cycl

e th

roug

h th

e ava

ilabl

e co

ntro

lty

pe o

ptio

ns.

Ent

er

Ent

er

Wiz

ards

Set

up S

cree

n, R

elay

3 1:pH, Mix Time

2:ORP, Mix Time

>3:Not Used

A:Alarm

P:Pager1

P:Pager2

P:Pager3

P:Pager4

Change Control Type

Press -> to toggle

control type

>Not Used

Cha

nge

Con

trol

Typ

e, R

elay


Press -> to toggle

control type

>ProbeClean

Cha

nge

Con

trol

Typ

e, R

elay

3

-Confirm Changes


and Reassign

NO:7 9:YES

Cha

nge

Con

trol C

onfir

mat

ion

Scr

een

Pres

s the

[9] k

ey to

acc

ept t

he m

ost

rece

ntly

sele

cted

cont

rol t

ype

setti

ngs o

r the

[7] k

ey to

can

cel.

Ent

er

Pres

s the

righ

t arr

ow k

ey [>

] to

cycl

e th

roug

h th

e ava

ilabl

e co

ntro

lty

pe o

ptio

ns.

Wiz

ards

Set

up S

cree

n, A

larm

1:pH, Mix Time

2:ORP, Mix Time

3:Not Used

>A:Alarm

P:Pager1

P:Pager2

P:Pager3

P:Pager4

Change Control Type

Press -> to toggle

control type

>Alarm

Cha

nge

Con

trol

Typ

e, A

larm

Change Control Type

Press -> to toggle

control type

>Not Used

Cha

nge

Con

trol

Typ

e, A

larm

-Confirm Changes


and Reassign

NO:7 9:YES

Cha

nge

Con

trol C

onfir

mat

ion

Scr

een

Pres

s the

[9] k

ey to

acc

ept t

he m

ost

rece

ntly

sele

cted

cont

rol t

ype

setti

ngs o

r the

[7] k

ey to

can

cel.

Ent

er

Pres

s the

righ

t arr

ow k

ey [>

] to

cycl

e th

roug

h th

e ava

ilabl

e co

ntro

lty

pe o

ptio

ns.

Ent

er

Ent

er

T

o W

izar

ds S

etup

(2 o

f 2)

Con

trol O

ptio

ns fo

r R

elay

1:

1. 2. 3.

pH, M

ix T

ime

pH, C

ycle

Tim

eN

ot U

sed

Con

trol O

ptio

ns fo

r R

elay

2:

1. 2. 3. 4. 5. 6.

OR

P, M

ix T

ime

OR

P, C

ycle

Tim

eN

ot U

sed

PPM

, Mix

Tim

ePP

M, C

ycle

Tim

eO

RP,

Cal

Hyp

o

Con

trol O

ptio

ns fo

r th

e A

larm

:1. 2.

Ala

rmN

ot U

sed

pH

> 7.67-OFF 7.50s

ORP 490 -OFF 700s

_____

69.0f SW1OFFSW2OFF

Mai

n St

atus

Scr

een

Bac

k

Con

trol O

ptio

ns fo

r R

elay

3:

1. 2. 3. 4. 5. 6. 7. 8. 9. 10.

11.

12.

13.

Not

Use

dPr

obeC

lean

Hea

ter

Ala

rm O

utpH

, Mix

Tim

epH

, Cyc

le T

ime

Aux

:Mak

eUp

Dai

lyW

eekl

yPP

M, M

ix T

ime

PPM

, Cyc

le T

ime

OR

P, M

ix T

ime

OR

P, C

ycle

Tim

e

97 or 97 or 97 or

Ent

er

97 or

AK

110

Wiz

ards

Set

up S

cree

n N

avig

atio

n, R

ev 3

22 A

ug 2

00810.23

109

Name:Main Pool

System

Programming

Service

Data ( 8:441 )

Communications

Security Setup

>Wizards

Serial # 123456

Con

figur

ation

Men

u, W

izar

ds

AK

110

Wiz

ards

Set

up S

cree

n N

avig

atio

n (1

of 2

)

Ent

erB

ack

Wiz

ards

Set

up S

cree

n, R

elay

1>1:pH, Mix Time

2:ORP, Mix Time

3:Not Used

A:Alarm

P:Pager1

P:Pager2

P:Pager3

P:Pager4

Change Control Type

Press -> to toggle

control type

>pH, Mix Time

Cha

nge

Con

trol

Typ

e, R

elay


Press -> to toggle

control type

>pH, Cycle Time

Cha

nge

Con

trol

Typ

e, R

elay

1

-Confirm Changes


and Reassign

NO:7 9:YES

Cha

nge

Con

trol C

onfir

mat

ion

Scr

een

Pres

s the

[9] k

ey to

acc

ept t

he m

ost

rece

ntly

sele

cted

cont

rol t

ype

setti

ngs o

r the

[7] k

ey to

can

cel.

Ent

er

Pres

s the

righ

t arr

ow k

ey [>

] to

cycl

e th

roug

h th

e ava

ilabl

e co

ntro

lty

pe o

ptio

ns.

Wiz

ards

Set

up S

cree

n, R

elay

2 1:pH, Mix Time

>2:ORP, Mix Time

3:Not Used

A:Alarm

P:Pager1

P:Pager2

P:Pager3

P:Pager4

Change Control Type

Press -> to toggle

control type

>ORP, Mix Time

Cha

nge

Con

trol

Typ

e, R

elay


Press -> to toggle

control type

>ORP, Cycle Time

Cha

nge

Con

trol

Typ

e, R

elay

2

-Confirm Changes


and Reassign

NO:7 9:YES

Cha

nge

Con

trol C

onfir

mat

ion

Scr

een

Pres

s the

[9] k

ey to

acc

ept t

he m

ost

rece

ntly

sele

cted

cont

rol t

ype

setti

ngs o

r the

[7] k

ey to

can

cel.

Pres

s the

righ

t arr

ow k

ey [>

] to

cycl

e th

roug

h th

e ava

ilabl

e co

ntro

lty

pe o

ptio

ns.

Ent

er

Ent

er

Wiz

ards

Set

up S

cree

n, R

elay

3 1:pH, Mix Time

2:ORP, Mix Time

>3:Not Used

A:Alarm

P:Pager1

P:Pager2

P:Pager3

P:Pager4

Change Control Type

Press -> to toggle

control type

>Not Used

Cha

nge

Con

trol

Typ

e, R

elay


Press -> to toggle

control type

>ProbeClean

Cha

nge

Con

trol

Typ

e, R

elay

3

-Confirm Changes


and Reassign

NO:7 9:YES

Cha

nge

Con

trol C

onfir

mat

ion

Scr

een

Pres

s the

[9] k

ey to

acc

ept t

he m

ost

rece

ntly

sele

cted

cont

rol t

ype

setti

ngs o

r the

[7] k

ey to

can

cel.

Ent

er

Pres

s the

righ

t arr

ow k

ey [>

] to

cycl

e th

roug

h th

e ava

ilabl

e co

ntro

lty

pe o

ptio

ns.

Wiz

ards

Set

up S

cree

n, A

larm

1:pH, Mix Time

2:ORP, Mix Time

3:Not Used

>A:Alarm

P:Pager1

P:Pager2

P:Pager3

P:Pager4

Change Control Type

Press -> to toggle

control type

>Alarm

Cha

nge

Con

trol

Typ

e, A

larm

Change Control Type

Press -> to toggle

control type

>Not Used

Cha

nge

Con

trol

Typ

e, A

larm

-Confirm Changes


and Reassign

NO:7 9:YES

Cha

nge

Con

trol C

onfir

mat

ion

Scr

een

Pres

s the

[9] k

ey to

acc

ept t

he m

ost

rece

ntly

sele

cted

cont

rol t

ype

setti

ngs o

r the

[7] k

ey to

can

cel.

Ent

er

Pres

s the

righ

t arr

ow k

ey [>

] to

cycl

e th

roug

h th

e ava

ilabl

e co

ntro

lty

pe o

ptio

ns.

Ent

er

Ent

er

T

o W

izar

ds S

etup

(2 o

f 2)

Con

trol O

ptio

ns fo

r R

elay

1:

1. 2. 3.

pH, M

ix T

ime

pH, C

ycle

Tim

eN

ot U

sed

Con

trol O

ptio

ns fo

r R

elay

2:

1. 2. 3. 4. 5. 6.

OR

P, M

ix T

ime

OR

P, C

ycle

Tim

eN

ot U

sed

PPM

, Mix

Tim

ePP

M, C

ycle

Tim

eO

RP,

Cal

Hyp

o

Con

trol O

ptio

ns fo

r th

e A

larm

:1. 2.

Ala

rmN

ot U

sed

pH

> 7.67-OFF 7.50s

ORP 490 -OFF 700s

_____

69.0f SW1OFFSW2OFF

Mai

n St

atus

Scr

een

Bac

k

Con

trol O

ptio

ns fo

r R

elay

3:

1. 2. 3. 4. 5. 6. 7. 8. 9. 10.

11.

12.

13.

Not

Use

dPr

obeC

lean

Hea

ter

Ala

rm O

utpH

, Mix

Tim

epH

, Cyc

le T

ime

Aux

:Mak

eUp

Dai

lyW

eekl

yPP

M, M

ix T

ime

PPM

, Cyc

le T

ime

OR

P, M

ix T

ime

OR

P, C

ycle

Tim

e

97 or 97 or 97 or

Ent

er

97 or

AK

110

Wiz

ards

Set

up S

cree

n N

avig

atio

n, R

ev 3

22 A

ug 2

008

110

AK

110

Wiz

ards

Set

up S

cree

n N

avig

atio

n (2

of 2

)

Wiz

ards

Set

up S

cree

n, P

ager

1 1:pH, Mix Time

2:ORP, Mix Time

3:Not Used

A:Alarm

>P:Pager1

P:Pager2

P:Pager3

P:Pager4

Change Control Type

Press -> to toggle

control type

>Pager1

Cha

nge

Cont

rol T

ype,

Pag

er 1

Change Control Type

Press -> to toggle

control type

>Not Used

Cha

nge

Cont

rol T

ype,

Pag

er 1

-Confirm Changes


and Reassign

NO:7 9:YES

Cha

nge

Con

trol C

onfir

mat

ion

Scr

een

Pres

s the

[9] k

ey to

acc

ept t

he m

ost

rece

ntly

sele

cted

cont

rol t

ype

setti

ngs o

r the

[7] k

ey to

can

cel.

Ent

er

Pres

s the

righ

t arr

ow k

ey [>

] to

cycl

e th

roug

h th

e ava

ilabl

e co

ntro

lty

pe o

ptio

ns.

Wiz

ards

Set

up S

cree

n, P

ager

2 1:pH, Mix Time

2:ORP, Mix Time

3:Not Used

A:Alarm

P:Pager1

>P:Pager2

P:Pager3

P:Pager4

Change Control Type

Press -> to toggle

control type

>Pager2

Cha

nge

Cont

rol T

ype,

Pag

er 2

Change Control Type

Press -> to toggle

control type

>Not Used

Cha

nge

Cont

rol T

ype,

Pag

er 2

-Confirm Changes


and Reassign

NO:7 9:YES

Cha

nge

Con

trol C

onfir

mat

ion

Scr

een

Pres

s the

[9] k

ey to

acc

ept t

he m

ost

rece

ntly

sele

cted

cont

rol t

ype

setti

ngs o

r the

[7] k

ey to

can

cel.

Ent

er

Pres

s the

righ

t arr

ow k

ey [>

] to

cycl

e th

roug

h th

e ava

ilabl

e co

ntro

lty

pe o

ptio

ns.

Ent

er

Ent

er

Wiz

ards

Set

up S

cree

n, P

ager

3 1:pH, Mix Time

2:ORP, Mix Time

3:Not Used

A:Alarm

P:Pager1

P:Pager2

>P:Pager3

P:Pager4

Change Control Type

Press -> to toggle

control type

>Pager3

Cha

nge

Cont

rol T

ype,

Pag

er 3

Change Control Type

Press -> to toggle

control type

>Not Used

Cha

nge

Cont

rol T

ype,

Pag

er 3

-Confirm Changes


and Reassign

NO:7 9:YES

Cha

nge

Con

trol C

onfir

mat

ion

Scr

een

Pres

s the

[9] k

ey to

acc

ept t

he m

ost

rece

ntly

sele

cted

cont

rol t

ype

setti

ngs o

r the

[7] k

ey to

can

cel.

Ent

er

Pres

s the

righ

t arr

ow k

ey [>

] to

cycl

e th

roug

h th

e ava

ilabl

e co

ntro

lty

pe o

ptio

ns.

Wiz

ards

Set

up S

cree

n, P

ager

4 1:pH, Mix Time

2:ORP, Mix Time

3:Not Used

A:Alarm

P:Pager1

P:Pager2

P:Pager3

>P:Pager4

Change Control Type

Press -> to toggle

control type

>Pager4

Cha

nge

Cont

rol T

ype,

Pag

er 4

Change Control Type

Press -> to toggle

control type

>Not Used

Cha

nge

Cont

rol T

ype,

Pag

er 4

-Confirm Changes


and Reassign

NO:7 9:YES

Cha

nge

Con

trol C

onfir

mat

ion

Scr

een

Pres

s the

[9] k

ey to

acc

ept t

he m

ost

rece

ntly

sele

cted

cont

rol t

ype

setti

ngs o

r the

[7] k

ey to

can

cel.

Ent

er

Pres

s the

righ

t arr

ow k

ey [>

] to

cycl

e th

roug

h th

e ava

ilabl

e co

ntro

lty

pe o

ptio

ns.

Ent

er

Ent

er

Fro

m W

izar

ds S

etup

(1 o

f 2)

Con

trol O

ptio

ns fo

r P

ager

/ E

-mai

l 1:

1. 2.Pa

ger1

/ Em

ail1

Not

Use

d

Con

trol O

ptio

ns fo

r P

ager

/ E

-mai

l 2:

1. 2.Pa

ger2

/ Em

ail2

Not

Use

d

Con

trol O

ptio

ns fo

r P

ager

/ E

-mai

l 3:

1. 2.Pa

ger3

/ Em

ail3

Not

Use

d

Con

trol O

ptio

ns fo

r P

ager

/ E

-mai

l 4:

1. 2.Pa

ger4

/ Em

ail4

Not

Use

d

The

Wiz

ards

Set

up S

cree

n di

spla

ysfo

ur p

ager

s whe

n a

dial

-up

mod

em(o

r no

mod

em a

t all)

is in

stal

led

inth

e co

ntro

ller.

If a

cel

lula

r mod

em is

inst

alle

d in

the

cont

rolle

r, th

ese fo

ur p

ager

s ar

ere

plac

ed w

ith s

imila

r E-m

ail w

izar

dse

tup

men

us.

Wiz

ards

Set

up S

cree

n, E

mai

l 1 1:pH, Mix Time

2:ORP, Mix Time

3:Not Used

A:Alarm

>P:Email1

P:Email2

P:Email3

P:Email4

Wiz

ards

Set

up S

cree

n an

d th

e M

odem

97 or 97 or 97 or 97 or

AK

110

Wiz

ards

Set

up S

cree

n N

avig

atio

n, R

ev 3

22 A

ug 2

008

111

AK

110

Wiz

ards

Set

up S

cree

n N

avig

atio

n (2

of 2

)

Wiz

ards

Set

up S

cree

n, P

ager

1 1:pH, Mix Time

2:ORP, Mix Time

3:Not Used

A:Alarm

>P:Pager1

P:Pager2

P:Pager3

P:Pager4

Change Control Type

Press -> to toggle

control type

>Pager1

Cha

nge

Cont

rol T

ype,

Pag

er 1

Change Control Type

Press -> to toggle

control type

>Not Used

Cha

nge

Cont

rol T

ype,

Pag

er 1

-Confirm Changes


and Reassign

NO:7 9:YES

Cha

nge

Con

trol C

onfir

mat

ion

Scr

een

Pres

s the

[9] k

ey to

acc

ept t

he m

ost

rece

ntly

sele

cted

cont

rol t

ype

setti

ngs o

r the

[7] k

ey to

can

cel.

Ent

er

Pres

s the

righ

t arr

ow k

ey [>

] to

cycl

e th

roug

h th

e ava

ilabl

e co

ntro

lty

pe o

ptio

ns.

Wiz

ards

Set

up S

cree

n, P

ager

2 1:pH, Mix Time

2:ORP, Mix Time

3:Not Used

A:Alarm

P:Pager1

>P:Pager2

P:Pager3

P:Pager4

Change Control Type

Press -> to toggle

control type

>Pager2

Cha

nge

Cont

rol T

ype,

Pag

er 2

Change Control Type

Press -> to toggle

control type

>Not Used

Cha

nge

Cont

rol T

ype,

Pag

er 2

-Confirm Changes


and Reassign

NO:7 9:YES

Cha

nge

Con

trol C

onfir

mat

ion

Scr

een

Pres

s the

[9] k

ey to

acc

ept t

he m

ost

rece

ntly

sele

cted

cont

rol t

ype

setti

ngs o

r the

[7] k

ey to

can

cel.

Ent

er

Pres

s the

righ

t arr

ow k

ey [>

] to

cycl

e th

roug

h th

e ava

ilabl

e co

ntro

lty

pe o

ptio

ns.

Ent

er

Ent

er

Wiz

ards

Set

up S

cree

n, P

ager

3 1:pH, Mix Time

2:ORP, Mix Time

3:Not Used

A:Alarm

P:Pager1

P:Pager2

>P:Pager3

P:Pager4

Change Control Type

Press -> to toggle

control type

>Pager3

Cha

nge

Cont

rol T

ype,

Pag

er 3

Change Control Type

Press -> to toggle

control type

>Not Used

Cha

nge

Cont

rol T

ype,

Pag

er 3

-Confirm Changes


and Reassign

NO:7 9:YES

Cha

nge

Con

trol C

onfir

mat

ion

Scr

een

Pres

s the

[9] k

ey to

acc

ept t

he m

ost

rece

ntly

sele

cted

cont

rol t

ype

setti

ngs o

r the

[7] k

ey to

can

cel.

Ent

er

Pres

s the

righ

t arr

ow k

ey [>

] to

cycl

e th

roug

h th

e ava

ilabl

e co

ntro

lty

pe o

ptio

ns.

Wiz

ards

Set

up S

cree

n, P

ager

4 1:pH, Mix Time

2:ORP, Mix Time

3:Not Used

A:Alarm

P:Pager1

P:Pager2

P:Pager3

>P:Pager4

Change Control Type

Press -> to toggle

control type

>Pager4

Cha

nge

Cont

rol T

ype,

Pag

er 4

Change Control Type

Press -> to toggle

control type

>Not Used

Cha

nge

Cont

rol T

ype,

Pag

er 4

-Confirm Changes


and Reassign

NO:7 9:YES

Cha

nge

Con

trol C

onfir

mat

ion

Scr

een

Pres

s the

[9] k

ey to

acc

ept t

he m

ost

rece

ntly

sele

cted

cont

rol t

ype

setti

ngs o

r the

[7] k

ey to

can

cel.

Ent

er

Pres

s the

righ

t arr

ow k

ey [>

] to

cycl

e th

roug

h th

e ava

ilabl

e co

ntro

lty

pe o

ptio

ns.

Ent

er

Ent

er

Fro

m W

izar

ds S

etup

(1 o

f 2)

Con

trol O

ptio

ns fo

r P

ager

/ E

-mai

l 1:

1. 2.Pa

ger1

/ Em

ail1

Not

Use

d

Con

trol O

ptio

ns fo

r P

ager

/ E

-mai

l 2:

1. 2.Pa

ger2

/ Em

ail2

Not

Use

d

Con

trol O

ptio

ns fo

r P

ager

/ E

-mai

l 3:

1. 2.Pa

ger3

/ Em

ail3

Not

Use

d

Con

trol O

ptio

ns fo

r P

ager

/ E

-mai

l 4:

1. 2.Pa

ger4

/ Em

ail4

Not

Use

d

The

Wiz

ards

Set

up S

cree

n di

spla

ysfo

ur p

ager

s whe

n a

dial

-up

mod

em(o

r no

mod

em a

t all)

is in

stal

led

inth

e co

ntro

ller.

If a

cel

lula

r mod

em is

inst

alle

d in

the

cont

rolle

r, th

ese fo

ur p

ager

s ar

ere

plac

ed w

ith s

imila

r E-m

ail w

izar

dse

tup

men

us.

Wiz

ards

Set

up S

cree

n, E

mai

l 1 1:pH, Mix Time

2:ORP, Mix Time

3:Not Used

A:Alarm

>P:Email1

P:Email2

P:Email3

P:Email4

Wiz

ards

Set

up S

cree

n an

d th

e M

odem

97 or 97 or 97 or 97 or

AK

110

Wiz

ards

Set

up S

cree

n N

avig

atio

n, R

ev 3

22 A

ug 2

008

112

pH

> 7.67-OFF 7.50s

ORP 490 -OFF 700s

_____

69.0f SW1OFFSW2OFF

Mai

n S

tatu

s S

cree

n

Name:Main Pool

System

Programming

Service

>Data ( 30:441 )

Communications

Security Setup

Wizards

Serial # 123456

Con

figur

atio

n M

enu,

Dat

a

AK

110

Dat

a S

cree

n N

avig

atio

n

Bac

k

Ent

erB

ack

07/04 pH ORP Temp

12:00 7.68 745 76.

10:00 7.53 744 76.

08:00 7.45 740 75.

06:00 7.42 740 75.

04:00 7.45 742 76.

02:00 7.59 746 77.

00:00 7.60 750 76.

22:00 7.64 752 75.

Dat

a D

ispl

ay S

cree

n, C

urre

nt D

ay07/03 pH ORP Temp

22:00 7.64 752 75.

20:00 7.52 750 72.

18:00 7.48 746 73.

16:00 7.43 741 74.

14:00 7.55 744 74.

12:00 7.58 749 75.

10:00 7.60 750 75.

08:00 7.61 747 74.

Dat

a D

ispl

ay S

cree

n, P

revi

ous

Day

Pres

s the

up

and

dow

n ar

row

key

s to

scro

ll th

roug

h th

e rec

orde

d da

ta p

oint

s.Pr

ess t

he [B

ack]

key

to re

turn

to th

eco

nfig

urati

on m

enu.

Sens

or D

ata

as

Col

lect

ed, R

ecor

ded

and

Dis

play

ed

07/04 pH ORP Temp

12:00 7.68 745 76.

10:00 7.53 744 76.

08:00 7.45 740 75.

06:00 7.42 740 75.

04:00 7.45 742 76.

02:00 7.59 746 77.

00:00 7.60 750 76.

22:00 7.64 752 75.

07/04 pH ORP Temp

12:00 7.68 745 76.

10:00 7.53 744 76.

08:00 7.45 740 75.

06:00 7.42 740 75.

04:00 7.45 742 76.

02:00 7.59 746 77.

00:00 7.60 750 76.

22:00 7.64 752 75.

07/04 pH ORP Temp

12:00 7.68 745 76.

10:00 7.53 744 76.

08:00 7.45 740 75.

06:00 7.42 740 75.

04:00 7.45 742 76.

02:00 7.59 746 77.

00:00 7.60 750 76.

22:00 7.64 752 75.

Dat

a D

ispl

ay S

cree

n, O

RP

07/04 pH ORP Temp

12:00 7.68 745 76.

10:00 7.53 744 76.

08:00 7.45 740 75.

06:00 7.42 740 75.

04:00 7.45 742 76.

02:00 7.59 746 77.

00:00 7.60 750 76.

22:00 7.64 752 75.

Dat

a D

ispl

ay S

cree

n, T

empe

ratu

reD

ata

Dis

play

Scr

een,

pH

Dat

a D

ispl

ay S

cree

n, T

imes

tam

p

The

seco

nd c

olum

n lis

ts th

e pH

val

ues

as m

easu

red

by th

e AK

110

and

pHpr

obe.

The

third

col

umn

lists

the

OR

P va

lues

(in m

illiv

olts

) as m

easu

red

by th

eA

K11

0 an

d O

RP p

robe

.

The

four

th c

olum

n lis

ts th

e te

mpe

ratu

reva

lues

(in

degr

ees F

or C

) as

mea

sure

dby

the

AK

110

and

tem

pera

ture

pro

be.

The

first

col

umn

lists

the

date

and

tim

eat

whi

ch e

ach

data

set w

as re

cord

ed.

Each

row

com

pris

es a

sing

le d

ata

set.

The

data

col

lect

ed is

dep

ende

nt u

pon

the

type

of s

ensor

car

d in

stal

led.

The

AK

110

data

log

is c

apab

le o

f sto

ring

up to

a m

axim

um o

f 441

dat

a se

ts in

mem

ory

aton

e tim

e. W

hen

this

num

ber i

s exc

eede

d, th

e old

est d

ata

sets

are

ove

rwri

tten

with

the

mos

t rec

ently

reco

rded

dat

a.

In it

s def

ault

conf

igur

atio

n, th

e A

K11

0 w

ill re

cord

a da

ta s

et o

n ea

ch o

f the

"ev

en"

hour

sof

a 2

4-ho

ur c

lock

. Th

is tw

o-ho

ur ti

me

inte

rval

allo

ws fo

r up

to 3

6 da

ys a

nd 1

8 ho

urs

ofda

ta re

cord

ings

to b

e st

ored

in th

e co

ntro

ller's

onb

oard

mem

ory.

Via

the

Syst

em S

etup

Scr

een,

the

cont

rolle

r can

be

conf

igure

d to

reco

rd d

ata

sets

on

anho

urly

bas

is.

Whe

n so

con

figur

ed, t

he o

ne-h

our ti

me

inte

rval

allo

ws

for u

p to

18

days

and

9 ho

urs o

f dat

a re

cord

ings

to b

e st

ored

in th

e co

ntro

ller's

onb

oard

mem

ory.

Sens

or D

ata

Rec

ordi

ng In

terv

als

07/04 pH ORP Temp

12:00 7.68 745 76.

11:00 7.59 744 76.

10:00 7.53 744 76.

09:00 7.50 743 75.

08:00 7.45 740 75.

07:00 7.44 739 75.

06:00 7.42 740 75.

05:00 7.43 741 76.

07/04 pH ORP Temp

12:00 7.68 745 76.

10:00 7.53 744 76.

08:00 7.45 740 75.

06:00 7.42 740 75.

04:00 7.45 742 76.

02:00 7.59 746 77.

00:00 7.60 750 76.

22:00 7.64 752 75.

Dat

a D

ispl

ay S

cree

n, H

ourly

Inte

rval

sD

ata

Dis

play

Scre

en, 2

Hou

r In

terv

als

The

last

8 re

cord

s sho

wn

cove

r a 1

6ho

ur ti

me

inte

rval

.Th

e la

st 8

reco

rds s

how

n co

ver a

n 8-

hour

tim

e in

terv

al.

If th

e st

anda

rd p

H/O

RP/

Tem

p se

nsor

card

is in

stal

led, t

hose

spe

cific

mea

sure

men

t typ

es w

ill b

e re

cord

ed in

the

data

log.

AK

110

Dat

a S

cree

n N

avig

atio

n, R

ev 3

21 A

ug 2

008

10.24

113

pH

> 7.67-OFF 7.50s

ORP 490 -OFF 700s

_____

69.0f SW1OFFSW2OFF

Mai

n S

tatu

s S

cree

n

Name:Main Pool

System

Programming

Service

>Data ( 30:441 )

Communications

Security Setup

Wizards

Serial # 123456

Con

figur

atio

n M

enu,

Dat

a

AK

110

Dat

a S

cree

n N

avig

atio

n

Bac

k

Ent

erB

ack

07/04 pH ORP Temp

12:00 7.68 745 76.

10:00 7.53 744 76.

08:00 7.45 740 75.

06:00 7.42 740 75.

04:00 7.45 742 76.

02:00 7.59 746 77.

00:00 7.60 750 76.

22:00 7.64 752 75.

Dat

a D

ispl

ay S

cree

n, C

urre

nt D

ay07/03 pH ORP Temp

22:00 7.64 752 75.

20:00 7.52 750 72.

18:00 7.48 746 73.

16:00 7.43 741 74.

14:00 7.55 744 74.

12:00 7.58 749 75.

10:00 7.60 750 75.

08:00 7.61 747 74.

Dat

a D

ispl

ay S

cree

n, P

revi

ous

Day

Pres

s the

up

and

dow

n ar

row

key

s to

scro

ll th

roug

h th

e rec

orde

d da

ta p

oint

s.Pr

ess t

he [B

ack]

key

to re

turn

to th

eco

nfig

urati

on m

enu.

Sens

or D

ata

as

Col

lect

ed, R

ecor

ded

and

Dis

play

ed

07/04 pH ORP Temp

12:00 7.68 745 76.

10:00 7.53 744 76.

08:00 7.45 740 75.

06:00 7.42 740 75.

04:00 7.45 742 76.

02:00 7.59 746 77.

00:00 7.60 750 76.

22:00 7.64 752 75.

07/04 pH ORP Temp

12:00 7.68 745 76.

10:00 7.53 744 76.

08:00 7.45 740 75.

06:00 7.42 740 75.

04:00 7.45 742 76.

02:00 7.59 746 77.

00:00 7.60 750 76.

22:00 7.64 752 75.

07/04 pH ORP Temp

12:00 7.68 745 76.

10:00 7.53 744 76.

08:00 7.45 740 75.

06:00 7.42 740 75.

04:00 7.45 742 76.

02:00 7.59 746 77.

00:00 7.60 750 76.

22:00 7.64 752 75.

Dat

a D

ispl

ay S

cree

n, O

RP

07/04 pH ORP Temp

12:00 7.68 745 76.

10:00 7.53 744 76.

08:00 7.45 740 75.

06:00 7.42 740 75.

04:00 7.45 742 76.

02:00 7.59 746 77.

00:00 7.60 750 76.

22:00 7.64 752 75.

Dat

a D

ispl

ay S

cree

n, T

empe

ratu

reD

ata

Dis

play

Scr

een,

pH

Dat

a D

ispl

ay S

cree

n, T

imes

tam

p

The

seco

nd c

olum

n lis

ts th

e pH

val

ues

as m

easu

red

by th

e AK

110

and

pHpr

obe.

The

third

col

umn

lists

the

OR

P va

lues

(in m

illiv

olts

) as m

easu

red

by th

eA

K11

0 an

d O

RP p

robe

.

The

four

th c

olum

n lis

ts th

e te

mpe

ratu

reva

lues

(in

degr

ees F

or C

) as

mea

sure

dby

the

AK

110

and

tem

pera

ture

pro

be.

The

first

col

umn

lists

the

date

and

tim

eat

whi

ch e

ach

data

set w

as re

cord

ed.

Each

row

com

pris

es a

sing

le d

ata

set.

The

data

col

lect

ed is

dep

ende

nt u

pon

the

type

of s

ensor

car

d in

stal

led.

The

AK

110

data

log

is c

apab

le o

f sto

ring

up to

a m

axim

um o

f 441

dat

a se

ts in

mem

ory

aton

e tim

e. W

hen

this

num

ber i

s exc

eede

d, th

e old

est d

ata

sets

are

ove

rwri

tten

with

the

mos

t rec

ently

reco

rded

dat

a.

In it

s def

ault

conf

igur

atio

n, th

e A

K11

0 w

ill re

cord

a da

ta s

et o

n ea

ch o

f the

"ev

en"

hour

sof

a 2

4-ho

ur c

lock

. Th

is tw

o-ho

ur ti

me

inte

rval

allo

ws fo

r up

to 3

6 da

ys a

nd 1

8 ho

urs

ofda

ta re

cord

ings

to b

e st

ored

in th

e co

ntro

ller's

onb

oard

mem

ory.

Via

the

Syst

em S

etup

Scr

een,

the

cont

rolle

r can

be

conf

igure

d to

reco

rd d

ata

sets

on

anho

urly

bas

is.

Whe

n so

con

figur

ed, t

he o

ne-h

our ti

me

inte

rval

allo

ws

for u

p to

18

days

and

9 ho

urs o

f dat

a re

cord

ings

to b

e st

ored

in th

e co

ntro

ller's

onb

oard

mem

ory.

Sens

or D

ata

Rec

ordi

ng In

terv

als

07/04 pH ORP Temp

12:00 7.68 745 76.

11:00 7.59 744 76.

10:00 7.53 744 76.

09:00 7.50 743 75.

08:00 7.45 740 75.

07:00 7.44 739 75.

06:00 7.42 740 75.

05:00 7.43 741 76.

07/04 pH ORP Temp

12:00 7.68 745 76.

10:00 7.53 744 76.

08:00 7.45 740 75.

06:00 7.42 740 75.

04:00 7.45 742 76.

02:00 7.59 746 77.

00:00 7.60 750 76.

22:00 7.64 752 75.

Dat

a D

ispl

ay S

cree

n, H

ourly

Inte

rval

sD

ata

Dis

play

Scre

en, 2

Hou

r In

terv

als

The

last

8 re

cord

s sho

wn

cove

r a 1

6ho

ur ti

me

inte

rval

.Th

e la

st 8

reco

rds s

how

n co

ver a

n 8-

hour

tim

e in

terv

al.

If th

e st

anda

rd p

H/O

RP/

Tem

p se

nsor

card

is in

stal

led, t

hose

spe

cific

mea

sure

men

t typ

es w

ill b

e re

cord

ed in

the

data

log.

AK

110

Dat

a S

cree

n N

avig

atio

n, R

ev 3

21 A

ug 2

008

114

Name:Main Pool

System

Programming

Service

Data ( 8:441 )

>Communications

Security Setup

Wizards

Serial # 123456

Con

figur

ation

Men

u, C

omm

unic

atio

ns

AK

110

Com

mun

icat

ions

Scr

een

for D

ial-U

p M

odem

s (1

of 2

)

Ent

erB

ack

Pres

s the

[Ent

er] k

ey to

cyc

le th

roug

hth

e ty

pe o

f mod

em in

stal

led.

The

scre

ens d

etai

led o

n th

is p

age

are

for

use

with

an

insta

lled

dial

-up

mod

em.

Com

mun

icatio

ns, D

ial-U

p M

odem

Com

mun

icat

ions

, Cel

lula

r M

odem

>Modem (Dial-Up)

Pager Test

Pager Numbers

Advanced Setup

Diagnostics

Sync Byte1: 203

Sync Byte2: 204

>Modem (Cellular)

Email Test

Email Addresses

Advanced Setup

Diagnostics

Sync Byte1: 203

Sync Byte2: 204

Pres

s the

[Ent

er] k

ey to

sen

d ou

t a te

stpa

ge to

eac

h of

the

page

r num

bers

.Th

e co

ntro

ller w

ill se

nd to

eac

h pa

ger a

user

-pro

gram

med

num

eric

mes

sage

.V

erify

thes

e ag

ains

t the

act

ual m

essa

gere

ceiv

ed by

eac

h pa

ger.

Com

mun

icatio

ns, P

ager

Tes

t Modem (Dial-Up)

>Pager Test

Pager Numbers

Advanced Setup

Diagnostics

Sync Byte1: 203

Sync Byte2: 204

Com

mun

icatio

ns, P

ager

Num

bers

Pag

er N

umbe

rs, P

ager

2 Modem (Dial-Up)

Pager Test

>Pager Numbers

Advanced Setup

Diagnostics

Sync Byte1: 203

Sync Byte2: 204

Ent

er

Com

mun

icat

ions

, Adv

ance

d S

etup

Adv

ance

d S

etup

, Rin

gs to

Ans

wer

Modem (Dial-Up)

Pager Test

Pager Numbers

>Advanced Setup

Diagnostics

Sync Byte1: 203

Sync Byte2: 204

>Ring to answer: 1

Long hgup: 00:30:00

Reset to Defaults

Rin

gs to

Ans

wer

Scr

een

Enter new value

Current: 1

1

v-Cancel ^

Ent

er

Adv

ance

d S

etup

, Lon

g H

angu

p Ring to answer: 1

>Long hgup: 00:30:00

Reset to Defaults

Use

the

keyp

ad to

ent

er th

e m

inim

umtim

e pr

ior t

o re

conn

ectio

n af

ter a

"lo

ngha

ngup

". P

ress

the

[Ent

er] k

ey to

conf

irm o

r the

dow

n arr

ow k

ey to

can

cel.

Long

Han

gup

Scr

een

Ent

er

Adv

ance

d Se

tup,

Res

et to

Def

aults

Ring to answer: 1

Long hgup: 00:30:00

>Reset to Defaults

Enter new value

Current: 00:30:00

00:30:00

v-Cancel ^

Use

the

keyp

ad to

ent

er th

e nu

mbe

rof

ring

s prio

r to

mod

em p

ick-

up.

Pres

s the

[Ent

er] k

ey to

con

firm

or

the

dow

n ar

row

key

to c

ance

l.

>1:12125552368,,1234

56,,11#

2:12125552368,,1234

56,,12#

3:12125552368,,B,,9

9# 4:

1 12125552368,,123456,

,11# U

v-Cancel Back-Ins

Pag

er S

tring

Set

up S

cree

n

Use

the

keyp

ad to

ent

er th

e pa

ger

strin

g fo

r the

page

r to

be c

onta

cted

.Pr

ess t

he [E

nter]

key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

Pag

er N

umbe

rs, P

ager

3

Ent

er

Bac

k

Use

the

up a

nd do

wn

arro

w k

eys

tocy

cle

thro

ugh

each

pag

er s

trin

g en

try.

The

AK

110

supp

orts

a m

axim

um o

ffo

ur p

ager

stri

ng e

ntri

es.

To C

omm

mun

icat

ions

Scr

een

for D

ial-U

p M

odem

s (2

of 2

)

Ent

er

Ent

er

Ent

er

1:12125552368,,1234

56,,11#

>2:12125552368,,1234

56,,12#

3:12125552368,,B,,9

9# 4:

PA

GE

R 1

PA

GE

R 4

pH

> 7.67-OFF 7.50s

ORP 490 -OFF 700s

_____

69.0f SW1OFFSW2OFF

Mai

n St

atus

Scr

een

Bac

k

-Confirm Changes

-Reset to Defaults

NO:7 9:YES

Res

et to

Def

aults

Con

firm

atio

n S

cree

n

Pres

s the

[9] k

ey to

rese

t the

"Rin

g to

ans

wer

" an

d "L

ong

Hgu

p" se

tting

s or t

he [7

] key

to ca

ncel

.

Ent

er 97 or

AK

110

Com

mun

icat

ions

Scr

een

for D

ial-U

p M

odem

s, R

ev 3

21 A

ug 2

008

10.25

115

Name:Main Pool

System

Programming

Service

Data ( 8:441 )

>Communications

Security Setup

Wizards

Serial # 123456

Con

figur

ation

Men

u, C

omm

unic

atio

ns

AK

110

Com

mun

icat

ions

Scr

een

for D

ial-U

p M

odem

s (1

of 2

)

Ent

erB

ack

Pres

s the

[Ent

er] k

ey to

cyc

le th

roug

hth

e ty

pe o

f mod

em in

stal

led.

The

scre

ens d

etai

led o

n th

is p

age

are

for

use

with

an

insta

lled

dial

-up

mod

em.

Com

mun

icatio

ns, D

ial-U

p M

odem

Com

mun

icat

ions

, Cel

lula

r M

odem

>Modem (Dial-Up)

Pager Test

Pager Numbers

Advanced Setup

Diagnostics

Sync Byte1: 203

Sync Byte2: 204

>Modem (Cellular)

Email Test

Email Addresses

Advanced Setup

Diagnostics

Sync Byte1: 203

Sync Byte2: 204

Pres

s the

[Ent

er] k

ey to

sen

d ou

t a te

stpa

ge to

eac

h of

the

page

r num

bers

.Th

e co

ntro

ller w

ill se

nd to

eac

h pa

ger a

user

-pro

gram

med

num

eric

mes

sage

.V

erify

thes

e ag

ains

t the

act

ual m

essa

gere

ceiv

ed by

eac

h pa

ger.

Com

mun

icatio

ns, P

ager

Tes

t Modem (Dial-Up)

>Pager Test

Pager Numbers

Advanced Setup

Diagnostics

Sync Byte1: 203

Sync Byte2: 204

Com

mun

icatio

ns, P

ager

Num

bers

Pag

er N

umbe

rs, P

ager

2 Modem (Dial-Up)

Pager Test

>Pager Numbers

Advanced Setup

Diagnostics

Sync Byte1: 203

Sync Byte2: 204

Ent

er

Com

mun

icat

ions

, Adv

ance

d S

etup

Adv

ance

d S

etup

, Rin

gs to

Ans

wer

Modem (Dial-Up)

Pager Test

Pager Numbers

>Advanced Setup

Diagnostics

Sync Byte1: 203

Sync Byte2: 204

>Ring to answer: 1

Long hgup: 00:30:00

Reset to Defaults

Rin

gs to

Ans

wer

Scr

een

Enter new value

Current: 1

1

v-Cancel ^

Ent

er

Adv

ance

d S

etup

, Lon

g H

angu

p Ring to answer: 1

>Long hgup: 00:30:00

Reset to Defaults

Use

the

keyp

ad to

ent

er th

e m

inim

umtim

e pr

ior t

o re

conn

ectio

n af

ter a

"lo

ngha

ngup

". P

ress

the

[Ent

er] k

ey to

conf

irm o

r the

dow

n arr

ow k

ey to

can

cel.

Long

Han

gup

Scr

een

Ent

er

Adv

ance

d Se

tup,

Res

et to

Def

aults

Ring to answer: 1

Long hgup: 00:30:00

>Reset to Defaults

Enter new value

Current: 00:30:00

00:30:00

v-Cancel ^

Use

the

keyp

ad to

ent

er th

e nu

mbe

rof

ring

s prio

r to

mod

em p

ick-

up.

Pres

s the

[Ent

er] k

ey to

con

firm

or

the

dow

n ar

row

key

to c

ance

l.

>1:12125552368,,1234

56,,11#

2:12125552368,,1234

56,,12#

3:12125552368,,B,,9

9# 4:

1 12125552368,,123456,

,11# U

v-Cancel Back-Ins

Pag

er S

tring

Set

up S

cree

n

Use

the

keyp

ad to

ent

er th

e pa

ger

strin

g fo

r the

page

r to

be c

onta

cted

.Pr

ess t

he [E

nter]

key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

Pag

er N

umbe

rs, P

ager

3

Ent

er

Bac

k

Use

the

up a

nd do

wn

arro

w k

eys

tocy

cle

thro

ugh

each

pag

er s

trin

g en

try.

The

AK

110

supp

orts

a m

axim

um o

ffo

ur p

ager

stri

ng e

ntri

es.

To C

omm

mun

icat

ions

Scr

een

for D

ial-U

p M

odem

s (2

of 2

)

Ent

er

Ent

er

Ent

er

1:12125552368,,1234

56,,11#

>2:12125552368,,1234

56,,12#

3:12125552368,,B,,9

9# 4:

PA

GE

R 1

PA

GE

R 4

pH

> 7.67-OFF 7.50s

ORP 490 -OFF 700s

_____

69.0f SW1OFFSW2OFF

Mai

n St

atus

Scr

een

Bac

k

-Confirm Changes

-Reset to Defaults

NO:7 9:YES

Res

et to

Def

aults

Con

firm

atio

n S

cree

n

Pres

s the

[9] k

ey to

rese

t the

"Rin

g to

ans

wer

" an

d "L

ong

Hgu

p" se

tting

s or t

he [7

] key

to ca

ncel

.

Ent

er 97 or

AK

110

Com

mun

icat

ions

Scr

een

for D

ial-U

p M

odem

s, R

ev 3

21 A

ug 2

008

116

Ent

er

Com

mun

icat

ions,

Syn

c B

yte

1S

ync

Byt

e 1

Scr

een

Modem (Dial-Up)

Pager Test

Pager Numbers

Advanced Setup

Diagnostics

>Sync Byte1: 203

Sync Byte2: 204

Ent

er

Use

the

keyp

ad to

ente

r a n

umbe

r fro

m0

to 2

55.

This

is th

e sec

ond

sync

byt

efo

r con

trolle

r com

mun

icat

ions

sec

urity

.Pr

ess t

he [E

nter

] key

to c

onfir

m o

r the

dow

n ar

row

key

to c

ance

l.

Com

mun

icat

ions,

Syn

c B

yte

2S

ync

Byt

e 2

Ent

ry S

cree

n Modem (Dial-Up)

Pager Test

Pager Numbers

Advanced Setup

Diagnostics

Sync Byte1: 203

>Sync Byte2: 204

Enter new value

Current: 204

204

v-Cancel ^

Enter new value

Current: 203

203

v-Cancel ^

Use

the

keyp

ad to

ente

r a n

umbe

r fro

m0

to 2

55.

This

is th

e fir

st s

ync

byte

for

cont

rolle

r com

mun

icati

ons

secu

rity

.Pr

ess t

he [E

nter

] key

to c

onfir

m o

r the

dow

n ar

row

key

to c

ance

l.

The

Mod

em D

iagn

ostic

s Scr

een

disp

lays

mod

em c

onfig

urat

ion

data

such

as t

he m

odem

initia

lizat

ion

stri

ng.

This

dat

a is

inten

ded

for u

se b

yqu

alifi

ed se

rvic

e pe

rson

nel.

Com

mun

icat

ions

, Dia

gnos

tics

Mod

em D

iagn

ostic

s S

cree

n Modem (Dial-Up)

Pager Test

Pager Numbers

Advanced Setup

>Diagnostics

Sync Byte1: 203

Sync Byte2: 204


&K0S8=4 OK _

Pager 0PgD: 0

Sts 0 6789 0

Ent

er

Bac

k

6

From

Com

mm

unic

ation

s Sc

reen

for D

ial-U

p M

odem

s (1

of 2

)

AK

110

Com

mun

icat

ions

Scr

een

for D

ial-U

p M

odem

s (2

of 2

)

Usi

ng th

e A

K11

0 K

eypa

d to

Ent

er a

Pag

er N

umbe

r

112125552368,,123456,

,12# U

v-Cancel Back-Ins

Each

num

eric

key

is a

ssoci

ated

with

thre

eor

mor

e le

tters

of t

he a

lpha

bet,

or w

ithpu

nctu

atio

n an

d ot

her s

peci

al c

hara

cter

s.

Succ

essi

ve k

eypr

esses

cyc

le th

roug

h th

eva

rious

cha

ract

ers a

ssoci

ated

with

eac

hke

y. F

or in

stan

ce, p

ress

the

[5] k

ey o

nce

to d

ispl

ay th

e nu

mber

"5"

on-

scre

en.

Pres

s it a

seco

nd ti

me (

whi

le th

e cu

rsor

isin

the

sam

e po

sitio

n) to

dis

play

the

lette

r"J

". T

he th

ird k

eypr

ess d

ispl

ays

the

lette

r"K

" an

d th

e fo

urth

keyp

ress

dis

play

s th

ele

tter "

L".

Pres

s the

key

one

mor

e tim

e to

retu

rn to

the

num

ber "

5".

Each

of t

he a

rrow

key

s as

wel

l as

the

[Bac

k] a

nd [E

nter

] key

s pe

rfor

m s

peci

ficfu

nctio

ns w

ithin

the

Page

r Str

ing

Setu

pSc

reen

.

Pres

s the

up

arro

w ke

y to

del

ete

the

char

acte

r at t

he c

urso

r pos

ition

.Pr

ess t

he le

ft ar

row k

ey to

mov

e th

ecu

rsor

one

spac

e to

the

left.

Pres

s the

righ

t arr

ow k

ey to

mov

e th

ecu

rsor

one

spac

e to

the

righ

t.Pr

ess t

he d

own

arro

w ke

y to

can

cel o

ut o

fth

e pa

ger s

tring

ent

ry p

roce

ss.

Pres

s the

[Bac

k] k

ey to

inse

rt a

bla

nksp

ace

at th

e cu

rsor

pos

ition

.Pr

ess t

he [E

nter

] key

to c

onfir

m th

e pa

ger

strin

g as

disp

laye

d on

-scr

een.

Mov

ing

the

Cur

sor i

n th

e Pa

ger N

umbe

r Scr

een

Pag

er N

umbe

r, Cu

rsor

to R

ight

1 12125552368,,123456,

,12# U

v-Cancel Back-Ins

Pag

er N

umbe

r, C

urso

r to

Lef

t

The

curs

or p

ositi

on is

indi

cate

d by

the

char

acte

r "1"

(col

umn

1) lo

cate

ddi

rect

ly a

bove

the

first

cha

ract

er o

fth

e pa

ger n

umbe

r str

ing.

Pres

s the

righ

t arro

w k

ey to

mov

eth

e cu

rsor

one

spac

e to

the

righ

t.

The

curs

or h

as m

oved

one

spa

ce to

the

right

and

is n

ow p

ositi

oned

dire

ctly

abo

ve th

e sec

ond

char

acte

rof

the

page

r num

ber s

trin

g.Pr

ess t

he le

ft ar

row

key

to re

turn

the

curs

or to

its p

revio

us p

ositi

on.

Sho

rtcut

to th

e A

dvan

ced

Set

up S

cree

n>Ring to answer: 1

Long hgup: 00:30:00

Reset to Defaults

The

Adva

nced

Set

up S

cree

n m

ayqu

ickl

y be

acc

esse

d fr

om th

eM

odem

Dia

gnos

tics S

cree

n by

pres

sing

the

[6] s

hort

cut k

ey.

2

12125552368,,123456,

,12# U

v-Cancel Back-Ins

Pag

er S

tring

Set

up S

cree

n

Con

stru

ctin

g a

Page

r Str

ing

A c

omm

a (,)

in th

e pag

er s

trin

gsi

gnifi

es a

four-

seco

nd p

ause

. A

llpa

ger s

tring

s mus

t be

term

inat

edw

ith a

pou

nd si

gn (#

). If

the

char

acte

r "B

" is

ente

red

in th

em

essa

ge b

ody,

the

cont

rolle

r will

subs

titut

e th

is le

tter w

ith th

e la

stfiv

e di

gits

of t

he un

it se

rial

num

ber

whe

n se

ndin

g th

e m

essa

ge.

In th

e be

low

exa

mple

, the

con

trol

ler

dial

s the

spec

ified

num

ber (

1-21

2-55

5-23

68) a

nd w

aits

eig

ht s

econ

ds(tw

o co

mm

as) b

efor

e se

ndin

g th

efir

st p

ortio

n of

the

mes

sage

. In

this

case

, the

seria

l num

ber o

f the

uni

t(1

2345

6) h

as b

een

man

ually

ent

ered

as th

e fir

st p

ortio

n of

the

mes

sage

.Fo

llow

ing

anot

her e

ight

-sec

ond

paus

e (tw

o m

ore

com

mas

) the

nex

tpo

rtion

of t

he m

essag

e is

sen

t (12

).

The

pool

serv

ice

prof

essi

onal

rece

ivin

g th

e pa

ge w

ould

then

be

able

to re

fere

nce

the s

eria

l num

ber

and

erro

r con

ditio

n to

iden

tify

the

spec

ific

cont

rolle

r, its

loca

tion,

and

the

cond

ition

that

trig

gere

d th

em

essa

ge.

The

info

rmat

ion

that a

pag

erm

essa

ge c

an c

onve

y is

rath

er m

ore

limite

d th

an a

mod

ern c

ellu

lar t

ext

mes

sage

. Pa

ger m

essa

ges

may

onl

yin

clud

e nu

mer

ic c

hara

cters

, and

it is

ther

efor

e ne

cess

ary to

be

crea

tive

inco

nstru

ctin

g a

mea

ning

ful m

essa

gere

gard

ing

the

contr

olle

r sta

tus.

The

pool

serv

ice

prof

essi

onal

rece

ivin

g a

notif

icatio

n vi

a pa

ger

wou

ld li

kely

wish

to k

now

whi

chco

ntro

ller s

ent th

e m

essa

ge, a

ndun

der w

hat c

ondit

ion

the

mes

sage

was

sent

. Fo

r ins

tanc

e, a

ssum

epa

ger 2

has

bee

n pro

gram

med

tose

nd o

ut a

mes

sage

whe

n th

e O

RP

drop

s bel

ow a

spec

ified

leve

l. T

hebo

dy o

f the

mess

age

mig

ht id

entif

yth

e co

ntro

ller b

y ser

ial n

umbe

ral

ong

with

a n

umer

ic c

ode

that

corr

elat

es to

a lo

w O

RP

cond

ition

(the

num

ber "

12"

has

been

arbi

traril

y ch

osen

for t

his

purp

ose.

)

The

max

imum

leng

th of

a p

ager

strin

g is

29

char

acte

rs.

Thi

sin

clud

es th

e pa

ger n

umbe

r, th

eem

bodi

ed m

essag

e, a

nd a

nyad

ditio

nal c

ontro

l cha

ract

ers.

The

first

por

tion

of th

e pa

ger s

trin

gre

pres

ents

the

num

ber o

f the

pag

erto

be

cont

acte

d. F

ollo

win

g th

epa

ger n

umbe

r is t

he m

essa

ge b

ody.

T U

V89

W X

Y Z

P Q

R S7 G

H I4

J K

L5M

N O6

A B

C2D

E F3

!$%&̂*

+1

,-#.@

_0C

onfir

m

ENTE

RB

AC

KIn

sert

L E F T

R I G H T

DEL

ETE

CA

NC

EL

AK

110

Com

mun

icat

ions

Scr

een

for D

ial-U

p M

odem

s, R

ev 3

21 A

ug 2

008

117

Ent

er

Com

mun

icat

ions,

Syn

c B

yte

1S

ync

Byt

e 1

Scr

een

Modem (Dial-Up)

Pager Test

Pager Numbers

Advanced Setup

Diagnostics

>Sync Byte1: 203

Sync Byte2: 204

Ent

er

Use

the

keyp

ad to

ente

r a n

umbe

r fro

m0

to 2

55.

This

is th

e sec

ond

sync

byt

efo

r con

trolle

r com

mun

icat

ions

sec

urity

.Pr

ess t

he [E

nter

] key

to c

onfir

m o

r the

dow

n ar

row

key

to c

ance

l.

Com

mun

icat

ions,

Syn

c B

yte

2S

ync

Byt

e 2

Ent

ry S

cree

n Modem (Dial-Up)

Pager Test

Pager Numbers

Advanced Setup

Diagnostics

Sync Byte1: 203

>Sync Byte2: 204

Enter new value

Current: 204

204

v-Cancel ^

Enter new value

Current: 203

203

v-Cancel ^

Use

the

keyp

ad to

ente

r a n

umbe

r fro

m0

to 2

55.

This

is th

e fir

st s

ync

byte

for

cont

rolle

r com

mun

icati

ons

secu

rity

.Pr

ess t

he [E

nter

] key

to c

onfir

m o

r the

dow

n ar

row

key

to c

ance

l.

The

Mod

em D

iagn

ostic

s Scr

een

disp

lays

mod

em c

onfig

urat

ion

data

such

as t

he m

odem

initia

lizat

ion

stri

ng.

This

dat

a is

inten

ded

for u

se b

yqu

alifi

ed se

rvic

e pe

rson

nel.

Com

mun

icat

ions

, Dia

gnos

tics

Mod

em D

iagn

ostic

s S

cree

n Modem (Dial-Up)

Pager Test

Pager Numbers

Advanced Setup

>Diagnostics

Sync Byte1: 203

Sync Byte2: 204


&K0S8=4 OK _

Pager 0PgD: 0

Sts 0 6789 0

Ent

er

Bac

k

6

From

Com

mm

unic

ation

s Sc

reen

for D

ial-U

p M

odem

s (1

of 2

)

AK

110

Com

mun

icat

ions

Scr

een

for D

ial-U

p M

odem

s (2

of 2

)

Usi

ng th

e A

K11

0 K

eypa

d to

Ent

er a

Pag

er N

umbe

r

112125552368,,123456,

,12# U

v-Cancel Back-Ins

Each

num

eric

key

is a

ssoci

ated

with

thre

eor

mor

e le

tters

of t

he a

lpha

bet,

or w

ithpu

nctu

atio

n an

d ot

her s

peci

al c

hara

cter

s.

Succ

essi

ve k

eypr

esses

cyc

le th

roug

h th

eva

rious

cha

ract

ers a

ssoci

ated

with

eac

hke

y. F

or in

stan

ce, p

ress

the

[5] k

ey o

nce

to d

ispl

ay th

e nu

mber

"5"

on-

scre

en.

Pres

s it a

seco

nd ti

me (

whi

le th

e cu

rsor

isin

the

sam

e po

sitio

n) to

dis

play

the

lette

r"J

". T

he th

ird k

eypr

ess d

ispl

ays

the

lette

r"K

" an

d th

e fo

urth

keyp

ress

dis

play

s th

ele

tter "

L".

Pres

s the

key

one

mor

e tim

e to

retu

rn to

the

num

ber "

5".

Each

of t

he a

rrow

key

s as

wel

l as

the

[Bac

k] a

nd [E

nter

] key

s pe

rfor

m s

peci

ficfu

nctio

ns w

ithin

the

Page

r Str

ing

Setu

pSc

reen

.

Pres

s the

up

arro

w ke

y to

del

ete

the

char

acte

r at t

he c

urso

r pos

ition

.Pr

ess t

he le

ft ar

row k

ey to

mov

e th

ecu

rsor

one

spac

e to

the

left.

Pres

s the

righ

t arr

ow k

ey to

mov

e th

ecu

rsor

one

spac

e to

the

righ

t.Pr

ess t

he d

own

arro

w ke

y to

can

cel o

ut o

fth

e pa

ger s

tring

ent

ry p

roce

ss.

Pres

s the

[Bac

k] k

ey to

inse

rt a

bla

nksp

ace

at th

e cu

rsor

pos

ition

.Pr

ess t

he [E

nter

] key

to c

onfir

m th

e pa

ger

strin

g as

disp

laye

d on

-scr

een.

Mov

ing

the

Cur

sor i

n th

e Pa

ger N

umbe

r Scr

een

Pag

er N

umbe

r, Cu

rsor

to R

ight

1 12125552368,,123456,

,12# U

v-Cancel Back-Ins

Pag

er N

umbe

r, C

urso

r to

Lef

t

The

curs

or p

ositi

on is

indi

cate

d by

the

char

acte

r "1"

(col

umn

1) lo

cate

ddi

rect

ly a

bove

the

first

cha

ract

er o

fth

e pa

ger n

umbe

r str

ing.

Pres

s the

righ

t arro

w k

ey to

mov

eth

e cu

rsor

one

spac

e to

the

righ

t.

The

curs

or h

as m

oved

one

spa

ce to

the

right

and

is n

ow p

ositi

oned

dire

ctly

abo

ve th

e sec

ond

char

acte

rof

the

page

r num

ber s

trin

g.Pr

ess t

he le

ft ar

row

key

to re

turn

the

curs

or to

its p

revio

us p

ositi

on.

Sho

rtcut

to th

e A

dvan

ced

Set

up S

cree

n>Ring to answer: 1

Long hgup: 00:30:00

Reset to Defaults

The

Adva

nced

Set

up S

cree

n m

ayqu

ickl

y be

acc

esse

d fr

om th

eM

odem

Dia

gnos

tics S

cree

n by

pres

sing

the

[6] s

hort

cut k

ey.

2

12125552368,,123456,

,12# U

v-Cancel Back-Ins

Pag

er S

tring

Set

up S

cree

n

Con

stru

ctin

g a

Page

r Str

ing

A c

omm

a (,)

in th

e pag

er s

trin

gsi

gnifi

es a

four-

seco

nd p

ause

. A

llpa

ger s

tring

s mus

t be

term

inat

edw

ith a

pou

nd si

gn (#

). If

the

char

acte

r "B

" is

ente

red

in th

em

essa

ge b

ody,

the

cont

rolle

r will

subs

titut

e th

is le

tter w

ith th

e la

stfiv

e di

gits

of t

he un

it se

rial

num

ber

whe

n se

ndin

g th

e m

essa

ge.

In th

e be

low

exa

mple

, the

con

trol

ler

dial

s the

spec

ified

num

ber (

1-21

2-55

5-23

68) a

nd w

aits

eig

ht s

econ

ds(tw

o co

mm

as) b

efor

e se

ndin

g th

efir

st p

ortio

n of

the

mes

sage

. In

this

case

, the

seria

l num

ber o

f the

uni

t(1

2345

6) h

as b

een

man

ually

ent

ered

as th

e fir

st p

ortio

n of

the

mes

sage

.Fo

llow

ing

anot

her e

ight

-sec

ond

paus

e (tw

o m

ore

com

mas

) the

nex

tpo

rtion

of t

he m

essag

e is

sen

t (12

).

The

pool

serv

ice

prof

essi

onal

rece

ivin

g th

e pa

ge w

ould

then

be

able

to re

fere

nce

the s

eria

l num

ber

and

erro

r con

ditio

n to

iden

tify

the

spec

ific

cont

rolle

r, its

loca

tion,

and

the

cond

ition

that

trig

gere

d th

em

essa

ge.

The

info

rmat

ion

that a

pag

erm

essa

ge c

an c

onve

y is

rath

er m

ore

limite

d th

an a

mod

ern c

ellu

lar t

ext

mes

sage

. Pa

ger m

essa

ges

may

onl

yin

clud

e nu

mer

ic c

hara

cters

, and

it is

ther

efor

e ne

cess

ary to

be

crea

tive

inco

nstru

ctin

g a

mea

ning

ful m

essa

gere

gard

ing

the

contr

olle

r sta

tus.

The

pool

serv

ice

prof

essi

onal

rece

ivin

g a

notif

icatio

n vi

a pa

ger

wou

ld li

kely

wish

to k

now

whi

chco

ntro

ller s

ent th

e m

essa

ge, a

ndun

der w

hat c

ondit

ion

the

mes

sage

was

sent

. Fo

r ins

tanc

e, a

ssum

epa

ger 2

has

bee

n pro

gram

med

tose

nd o

ut a

mes

sage

whe

n th

e O

RP

drop

s bel

ow a

spec

ified

leve

l. T

hebo

dy o

f the

mess

age

mig

ht id

entif

yth

e co

ntro

ller b

y ser

ial n

umbe

ral

ong

with

a n

umer

ic c

ode

that

corr

elat

es to

a lo

w O

RP

cond

ition

(the

num

ber "

12"

has

been

arbi

traril

y ch

osen

for t

his

purp

ose.

)

The

max

imum

leng

th of

a p

ager

strin

g is

29

char

acte

rs.

Thi

sin

clud

es th

e pa

ger n

umbe

r, th

eem

bodi

ed m

essag

e, a

nd a

nyad

ditio

nal c

ontro

l cha

ract

ers.

The

first

por

tion

of th

e pa

ger s

trin

gre

pres

ents

the

num

ber o

f the

pag

erto

be

cont

acte

d. F

ollo

win

g th

epa

ger n

umbe

r is t

he m

essa

ge b

ody.

T U

V89

W X

Y Z

P Q

R S7 G

H I4

J K

L5M

N O6

A B

C2D

E F3

!$%&̂*

+1

,-#.@

_0C

onfir

m

ENTE

RB

AC

KIn

sert

L E F T

R I G H T

DEL

ETE

CA

NC

EL

AK

110

Com

mun

icat

ions

Scr

een

for D

ial-U

p M

odem

s, R

ev 3

21 A

ug 2

008

118

pH

> 7.67-OFF 7.50s

ORP 490 -OFF 700s

_____

69.0f SW1OFFSW2OFF

Mai

n St

atus

Scr

een

Name:Main Pool

System

Programming

Service

Data ( 8:441 )

>Communications

Security Setup

Wizards

Serial # 123456

Con

figur

ation

Men

u, C

omm

unic

atio

ns

AK

110

Com

mun

icat

ions

Scr

een

for C

ellu

lar M

odem

s (1

of 3

)

Ent

erB

ack

Pres

s the

[Ent

er] k

ey to

cyc

le th

roug

hth

e ty

pe o

f mod

em in

stal

led.

The

scre

ens d

etai

led o

n th

is p

age

are

for

use

with

an

inst

alled

cel

lula

r mod

em.

Com

mun

icat

ions

, Cel

lula

r M

odem

Com

mun

icatio

ns, D

ial-U

p M

odem

Pres

s the

[Ent

er] k

ey to

sen

d ou

t a te

stm

essa

ge to

each

of t

he e

-mai

lad

dres

ses.

The

con

trol

ler w

ill s

end

toea

ch a

ddre

ss a

dat

a pac

ket.

Ver

ify th

ata

data

pac

ket w

as re

ceiv

ed a

t eac

had

dres

s.

Com

mun

icat

ions

, E-m

ail T

est

Com

mun

icat

ions

, E-m

ail A

ddre

sses

E-m

ail A

ddre

sses

, E-m

ail 2

Ent

er

Com

mun

icat

ions

, Adv

ance

d S

etup

Adv

ance

d S

etup

Scr

een

>1:albert.einstein@a

cu-trol.com

2:groucho.marx@acu-

trol.com

3:heddy.lamarr@acu-

trol.com

4:

1 albert.einstein@acu-

trol.com U

v-Cancel Back-Ins

E-m

ail A

ddre

ss S

etup

Scr

een

Use

the

keyp

ad to

ent

er th

e e-

mai

lad

dres

s into

the

addr

ess

book

.Pr

ess t

he [E

nter]

key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

E-m

ail A

ddre

sses

, E-m

ail 3

Ent

er

Bac

k

Use

the

up a

nd do

wn

arro

w k

eys

tocy

cle

thro

ugh e

ach

e-m

ail a

ddre

ssen

try. T

he A

K11

0 su

ppor

ts a

max

imum

of f

our a

ddre

ss e

ntri

es.

Ent

er

Ent

er

Ent

er

>Modem (Dial-Up)

Pager Test

Pager Numbers

Advanced Setup

Diagnostics

Sync Byte1: 203

Sync Byte2: 204

>Modem (Cellular)

Email Test

Email Addresses

Advanced Setup

Diagnostics

Sync Byte1: 203

Sync Byte2: 204

Modem (Cellular)

Email Test

Email Addresses

>Advanced Setup

Diagnostics

Sync Byte1: 203

Sync Byte2: 204

Modem (Cellular)

Email Test

>Email Addresses

Advanced Setup

Diagnostics

Sync Byte1: 203

Sync Byte2: 204

Modem (Cellular)

>Email Test

Email Addresses

Advanced Setup

Diagnostics

Sync Byte1: 203

Sync Byte2: 204

IP=166.213.212.193

M#=

ATT - 87dBm

>GOOD Signal

CurrBytes987

HourBytes 456

Clear All Bytes

Check IP

Signal Loop

Restart

EmailData# 1

@ hour # 8

cc Email# 3

Data Interval: 0

Packet # 5

Send Data Packet

1:albert.einstein@a

cu-trol.com

>2:groucho.marx@acu-

trol.com

3:heddy.lamarr@acu-

trol.com

4:

The

Adva

nced

Set

up S

cree

n co

nvey

sth

e fo

llow

ing in

form

atio

n w

ithre

spec

t to

the

cellu

lar c

onne

ctio

n:

"IP=

166.

213.

212.

193"

This

is th

e IP

addr

ess

assi

gned

to th

ece

llula

r mod

em.

"ATT

- 87

dbm

"Th

is is

a m

easu

rem

ent o

f the

cel

lula

rsi

gnal

stre

ngth

, in

min

us d

Bm

.

"GO

OD

Sig

nal"

This

is a

rela

tive

indi

cato

r of t

heov

eral

l cel

lula

r sig

nal q

ualit

y.

"Cur

rByt

es"

Tota

l num

ber o

f byt

es s

ent a

ndre

ceiv

ed o

ver t

he ce

llula

r con

nect

ion.

"Hou

rByt

es"

Num

ber o

f byte

s se

nt a

nd re

ceiv

edov

er th

e ce

llular

con

nect

ion

with

inth

e la

st ho

ur.

"Pac

ket#

"To

tal n

umbe

r of d

ata p

acke

ts s

ent o

utto

Acu

-Man

age.

To C

omm

mun

icat

ions

Scr

een

for C

ellu

lar M

odem

s (3

of 3

)To

Com

mm

unic

atio

ns S

cree

nfo

r Cel

lula

r Mod

ems

(2 o

f 3)

E-M

AIL

4E

-MA

IL 1

Bac

k

AK

110

Com

mun

icat

ions

Scr

een

for C

ellu

lar M

odem

s, R

ev 3

21 A

ug 2

008

10.26

119

pH

> 7.67-OFF 7.50s

ORP 490 -OFF 700s

_____

69.0f SW1OFFSW2OFF

Mai

n St

atus

Scr

een

Name:Main Pool

System

Programming

Service

Data ( 8:441 )

>Communications

Security Setup

Wizards

Serial # 123456

Con

figur

ation

Men

u, C

omm

unic

atio

ns

AK

110

Com

mun

icat

ions

Scr

een

for C

ellu

lar M

odem

s (1

of 3

)

Ent

erB

ack

Pres

s the

[Ent

er] k

ey to

cyc

le th

roug

hth

e ty

pe o

f mod

em in

stal

led.

The

scre

ens d

etai

led o

n th

is p

age

are

for

use

with

an

inst

alled

cel

lula

r mod

em.

Com

mun

icat

ions

, Cel

lula

r M

odem

Com

mun

icatio

ns, D

ial-U

p M

odem

Pres

s the

[Ent

er] k

ey to

sen

d ou

t a te

stm

essa

ge to

each

of t

he e

-mai

lad

dres

ses.

The

con

trol

ler w

ill s

end

toea

ch a

ddre

ss a

dat

a pac

ket.

Ver

ify th

ata

data

pac

ket w

as re

ceiv

ed a

t eac

had

dres

s.

Com

mun

icat

ions

, E-m

ail T

est

Com

mun

icat

ions

, E-m

ail A

ddre

sses

E-m

ail A

ddre

sses

, E-m

ail 2

Ent

er

Com

mun

icat

ions

, Adv

ance

d S

etup

Adv

ance

d S

etup

Scr

een

>1:albert.einstein@a

cu-trol.com

2:groucho.marx@acu-

trol.com

3:heddy.lamarr@acu-

trol.com

4:

1 albert.einstein@acu-

trol.com U

v-Cancel Back-Ins

E-m

ail A

ddre

ss S

etup

Scr

een

Use

the

keyp

ad to

ent

er th

e e-

mai

lad

dres

s into

the

addr

ess

book

.Pr

ess t

he [E

nter]

key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

E-m

ail A

ddre

sses

, E-m

ail 3

Ent

er

Bac

k

Use

the

up a

nd do

wn

arro

w k

eys

tocy

cle

thro

ugh e

ach

e-m

ail a

ddre

ssen

try. T

he A

K11

0 su

ppor

ts a

max

imum

of f

our a

ddre

ss e

ntri

es.

Ent

er

Ent

er

Ent

er

>Modem (Dial-Up)

Pager Test

Pager Numbers

Advanced Setup

Diagnostics

Sync Byte1: 203

Sync Byte2: 204

>Modem (Cellular)

Email Test

Email Addresses

Advanced Setup

Diagnostics

Sync Byte1: 203

Sync Byte2: 204

Modem (Cellular)

Email Test

Email Addresses

>Advanced Setup

Diagnostics

Sync Byte1: 203

Sync Byte2: 204

Modem (Cellular)

Email Test

>Email Addresses

Advanced Setup

Diagnostics

Sync Byte1: 203

Sync Byte2: 204

Modem (Cellular)

>Email Test

Email Addresses

Advanced Setup

Diagnostics

Sync Byte1: 203

Sync Byte2: 204

IP=166.213.212.193

M#=

ATT - 87dBm

>GOOD Signal

CurrBytes987

HourBytes 456

Clear All Bytes

Check IP

Signal Loop

Restart

EmailData# 1

@ hour # 8

cc Email# 3

Data Interval: 0

Packet # 5

Send Data Packet

1:albert.einstein@a

cu-trol.com

>2:groucho.marx@acu-

trol.com

3:heddy.lamarr@acu-

trol.com

4:

The

Adva

nced

Set

up S

cree

n co

nvey

sth

e fo

llow

ing in

form

atio

n w

ithre

spec

t to

the

cellu

lar c

onne

ctio

n:

"IP=

166.

213.

212.

193"

This

is th

e IP

addr

ess

assi

gned

to th

ece

llula

r mod

em.

"ATT

- 87

dbm

"Th

is is

a m

easu

rem

ent o

f the

cel

lula

rsi

gnal

stre

ngth

, in

min

us d

Bm

.

"GO

OD

Sig

nal"

This

is a

rela

tive

indi

cato

r of t

heov

eral

l cel

lula

r sig

nal q

ualit

y.

"Cur

rByt

es"

Tota

l num

ber o

f byt

es s

ent a

ndre

ceiv

ed o

ver t

he ce

llula

r con

nect

ion.

"Hou

rByt

es"

Num

ber o

f byte

s se

nt a

nd re

ceiv

edov

er th

e ce

llular

con

nect

ion

with

inth

e la

st ho

ur.

"Pac

ket#

"To

tal n

umbe

r of d

ata p

acke

ts s

ent o

utto

Acu

-Man

age.

To C

omm

mun

icat

ions

Scr

een

for C

ellu

lar M

odem

s (3

of 3

)To

Com

mm

unic

atio

ns S

cree

nfo

r Cel

lula

r Mod

ems

(2 o

f 3)

E-M

AIL

4E

-MA

IL 1

Bac

k

AK

110

Com

mun

icat

ions

Scr

een

for C

ellu

lar M

odem

s, R

ev 3

21 A

ug 2

008

120

AK

110

Com

mun

icat

ions

Scr

een

for C

ellu

lar M

odem

s (2

of 3

)

IP=166.213.212.193

M#=

ATT - 87dBm

GOOD Signal

CurrBytes987

HourBytes 456

Clear All Bytes

>Check IP

Signal Loop

Restart

EmailData# 1

@ hour # 8

cc Email# 3

Data Interval: 0

Packet # 5

Send Data Packet

Adv

ance

d S

etup,

Che

ck IP

Add

ress

IP=166.213.212.193

M#=

ATT - 87dBm

GOOD Signal

CurrBytes987

HourBytes 456

Clear All Bytes

Check IP

Signal Loop

Restart

EmailData# 1

@ hour # 8

cc Email# 3

>Data Interval: 0

Packet # 5

Send Data Packet

Adv

ance

d S

etup

, Dat

a In

terv

alA

dvan

ced

Set

up, D

ata

Inte

rval

Ent

er

Pres

s the

[Ent

er] k

ey to

set

the

time

inte

rval

afte

r whi

ch d

ata

pack

ets

will

be

to th

e Acu

-Man

age

web

site

.Th

e in

terv

al c

an b

e se

t fro

m 0

min

utes

(no

data

) to

240

min

utes

.

IP=166.213.212.193

M#=

ATT - 87dBm

GOOD Signal

CurrBytes987

HourBytes 456

Clear All Bytes

Check IP

Signal Loop

Restart

EmailData# 1

@ hour # 8

cc Email# 3

>Data Interval: 15

Packet # 5

Send Data Packet

IP=166.213.212.193

M#=

ATT - 87dBm

GOOD Signal

CurrBytes987

HourBytes 456

Clear All Bytes

Check IP

Signal Loop

Restart

EmailData# 1

@ hour # 8

cc Email# 3

Data Interval: 0

Packet # 5

>Send Data Packet

Adv

ance

d S

etup

, Sen

d D

ata

Pac

ket

Pres

s the

[Ent

er] k

ey to

pro

mpt

the

mod

em to

imm

edia

tely

sen

d a

data

pack

et to

the

Acu

-Man

age

II w

eb s

ite.

Ent

er

Ent

er

IP=166.213.212.193

M#=

ATT - 87dBm

GOOD Signal

CurrBytes987

HourBytes 456

Clear All Bytes

Check IP

Signal Loop

Restart

EmailData# 1

>@ hour # 8

cc Email# 3

Data Interval: 0

Packet # 5

Send Data Packet

Adv

ance

d S

etup

, E-m

ail a

t Hou

r:Enter new value

Current: 8

8

v-Cancel ^

Sen

d E

-mai

l at H

our

Scr

een

Ent

er

IP=166.213.212.193

M#=

ATT - 87dBm

GOOD Signal

CurrBytes987

HourBytes 456

Clear All Bytes

Check IP

Signal Loop

Restart

EmailData# 1

@ hour # 8

>cc Email# 3

Data Interval: 0

Packet # 5

Send Data Packet

Adv

ance

d S

etup

, Cop

y E

-mai

l Add

ress

:Enter new value

Current: 3

3

v-Cancel ^

Cop

y E

-mail

Add

ress

Scr

een

Use

the

keyp

ad to

ent

er th

e nu

mbe

rof

the

e-m

ail a

ddre

ss to

whi

ch th

ela

st tw

elve

reco

rded

dat

a se

ts a

re to

be c

opie

d. F

or in

stan

ce, t

he n

umbe

r"3

" re

pres

ents

the

thir

d en

try

in th

ee-

mai

l add

ress

boo

k.Pr

ess t

he [E

nter]

key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

Use

the

keyp

ad to

ent

er th

e ho

ur (o

na

24-h

our c

lock

) at w

hich

the

data

isto

be

sent

. Fo

r ins

tanc

e, th

e nu

mbe

r"8

" re

pres

ents

8:0

0 am

.Pr

ess t

he [E

nter]

key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

IP=166.213.212.193

M#=

ATT - 87dBm

GOOD Signal

CurrBytes987

HourBytes 456

Clear All Bytes

Check IP

>Signal Loop

Restart

EmailData# 1

@ hour # 8

cc Email# 3

Data Interval: 0

Packet # 5

Send Data Packet

Adv

ance

d S

etup

, Sig

nal L

oop

IP=166.213.212.193

M#=

ATT - 87dBm

GOOD Signal

CurrBytes987

HourBytes 456

Clear All Bytes

Check IP

Signal Loop

>Restart

EmailData# 1

@ hour # 8

cc Email# 3

Data Interval: 0

Packet # 5

Send Data Packet

Adv

ance

d S

etup

, Res

tart

Mod

em

Ent

er

IP=166.213.212.193

M#=

ATT - 87dBm

GOOD Signal

CurrBytes987

HourBytes 456

Clear All Bytes

Check IP

Signal Loop

Restart

>EmailData# 1

@ hour # 8

cc Email# 3

Data Interval: 0

Packet # 5

Send Data Packet

Adv

ance

d S

etup

, Sen

d E

-mai

l to:

Enter new value

Current: 1

1

v-Cancel ^

Use

the

keyp

ad to

ent

er th

e nu

mbe

rof

the

e-m

ail a

ddre

ss to

whi

ch th

ela

st tw

elve

reco

rded

dat

a se

ts a

re to

be se

nt.

For i

nsta

nce,

the

num

ber

"1"

repr

esen

ts th

e fir

st e

ntry

in th

ee-

mai

l add

ress

book

. Pr

ess

the

[Ent

er] k

ey to

conf

irm

or t

he d

own

arro

w k

ey to

can

cel.

Sen

d E

-mail

to A

ddre

ss S

cree

n

Ent

er

Pres

s the

[Ent

er] k

ey to

refr

esh

the

cellu

lar m

odem

IP ad

dres

s an

d di

spla

yit

on-s

cree

n.

Ent

er

Pres

s the

[Ent

er] k

ey to

con

tinua

llyse

arch

for a

cel

lula

r sig

nal u

ntil

one

isfo

und.

Thi

s pro

vide

s th

e us

er w

ith a

nop

portu

nity

to re

posi

tion

the

ante

nna

for o

ptim

um si

gnal

rece

ptio

n.

Ent

er

Pres

s the

[Ent

er] k

ey to

rest

art t

hem

odem

. Th

e mod

em w

ill d

isco

nnec

tfr

om th

e ne

twor

k, re

boot

, sea

rch

for a

sign

al, a

nd th

en re

conn

ect t

o th

ece

llula

r net

wor

k.

From

Com

mmu

nica

tions

Scr

een

for C

ellu

lar M

odem

s (1

of 3

)

ww

wA

cu-

Man

age

II

AK

110

Com

mun

icat

ions

Scr

een

for C

ellu

lar M

odem

s, R

ev 3

21 A

ug 2

008

121

AK

110

Com

mun

icat

ions

Scr

een

for C

ellu

lar M

odem

s (2

of 3

)

IP=166.213.212.193

M#=

ATT - 87dBm

GOOD Signal

CurrBytes987

HourBytes 456

Clear All Bytes

>Check IP

Signal Loop

Restart

EmailData# 1

@ hour # 8

cc Email# 3

Data Interval: 0

Packet # 5

Send Data Packet

Adv

ance

d S

etup,

Che

ck IP

Add

ress

IP=166.213.212.193

M#=

ATT - 87dBm

GOOD Signal

CurrBytes987

HourBytes 456

Clear All Bytes

Check IP

Signal Loop

Restart

EmailData# 1

@ hour # 8

cc Email# 3

>Data Interval: 0

Packet # 5

Send Data Packet

Adv

ance

d S

etup

, Dat

a In

terv

alA

dvan

ced

Set

up, D

ata

Inte

rval

Ent

er

Pres

s the

[Ent

er] k

ey to

set

the

time

inte

rval

afte

r whi

ch d

ata

pack

ets

will

be

to th

e Acu

-Man

age

web

site

.Th

e in

terv

al c

an b

e se

t fro

m 0

min

utes

(no

data

) to

240

min

utes

.

IP=166.213.212.193

M#=

ATT - 87dBm

GOOD Signal

CurrBytes987

HourBytes 456

Clear All Bytes

Check IP

Signal Loop

Restart

EmailData# 1

@ hour # 8

cc Email# 3

>Data Interval: 15

Packet # 5

Send Data Packet

IP=166.213.212.193

M#=

ATT - 87dBm

GOOD Signal

CurrBytes987

HourBytes 456

Clear All Bytes

Check IP

Signal Loop

Restart

EmailData# 1

@ hour # 8

cc Email# 3

Data Interval: 0

Packet # 5

>Send Data Packet

Adv

ance

d S

etup

, Sen

d D

ata

Pac

ket

Pres

s the

[Ent

er] k

ey to

pro

mpt

the

mod

em to

imm

edia

tely

sen

d a

data

pack

et to

the

Acu

-Man

age

II w

eb s

ite.

Ent

er

Ent

er

IP=166.213.212.193

M#=

ATT - 87dBm

GOOD Signal

CurrBytes987

HourBytes 456

Clear All Bytes

Check IP

Signal Loop

Restart

EmailData# 1

>@ hour # 8

cc Email# 3

Data Interval: 0

Packet # 5

Send Data Packet

Adv

ance

d S

etup

, E-m

ail a

t Hou

r:Enter new value

Current: 8

8

v-Cancel ^

Sen

d E

-mai

l at H

our

Scr

een

Ent

er

IP=166.213.212.193

M#=

ATT - 87dBm

GOOD Signal

CurrBytes987

HourBytes 456

Clear All Bytes

Check IP

Signal Loop

Restart

EmailData# 1

@ hour # 8

>cc Email# 3

Data Interval: 0

Packet # 5

Send Data Packet

Adv

ance

d S

etup

, Cop

y E

-mai

l Add

ress

:Enter new value

Current: 3

3

v-Cancel ^

Cop

y E

-mail

Add

ress

Scr

een

Use

the

keyp

ad to

ent

er th

e nu

mbe

rof

the

e-m

ail a

ddre

ss to

whi

ch th

ela

st tw

elve

reco

rded

dat

a se

ts a

re to

be c

opie

d. F

or in

stan

ce, t

he n

umbe

r"3

" re

pres

ents

the

thir

d en

try

in th

ee-

mai

l add

ress

boo

k.Pr

ess t

he [E

nter]

key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

Use

the

keyp

ad to

ent

er th

e ho

ur (o

na

24-h

our c

lock

) at w

hich

the

data

isto

be

sent

. Fo

r ins

tanc

e, th

e nu

mbe

r"8

" re

pres

ents

8:0

0 am

.Pr

ess t

he [E

nter]

key

to c

onfir

m o

rth

e do

wn

arro

w ke

y to

can

cel.

IP=166.213.212.193

M#=

ATT - 87dBm

GOOD Signal

CurrBytes987

HourBytes 456

Clear All Bytes

Check IP

>Signal Loop

Restart

EmailData# 1

@ hour # 8

cc Email# 3

Data Interval: 0

Packet # 5

Send Data Packet

Adv

ance

d S

etup

, Sig

nal L

oop

IP=166.213.212.193

M#=

ATT - 87dBm

GOOD Signal

CurrBytes987

HourBytes 456

Clear All Bytes

Check IP

Signal Loop

>Restart

EmailData# 1

@ hour # 8

cc Email# 3

Data Interval: 0

Packet # 5

Send Data Packet

Adv

ance

d S

etup

, Res

tart

Mod

em

Ent

er

IP=166.213.212.193

M#=

ATT - 87dBm

GOOD Signal

CurrBytes987

HourBytes 456

Clear All Bytes

Check IP

Signal Loop

Restart

>EmailData# 1

@ hour # 8

cc Email# 3

Data Interval: 0

Packet # 5

Send Data Packet

Adv

ance

d S

etup

, Sen

d E

-mai

l to:

Enter new value

Current: 1

1

v-Cancel ^

Use

the

keyp

ad to

ent

er th

e nu

mbe

rof

the

e-m

ail a

ddre

ss to

whi

ch th

ela

st tw

elve

reco

rded

dat

a se

ts a

re to

be se

nt.

For i

nsta

nce,

the

num

ber

"1"

repr

esen

ts th

e fir

st e

ntry

in th

ee-

mai

l add

ress

book

. Pr

ess

the

[Ent

er] k

ey to

conf

irm

or t

he d

own

arro

w k

ey to

can

cel.

Sen

d E

-mail

to A

ddre

ss S

cree

n

Ent

er

Pres

s the

[Ent

er] k

ey to

refr

esh

the

cellu

lar m

odem

IP ad

dres

s an

d di

spla

yit

on-s

cree

n.

Ent

er

Pres

s the

[Ent

er] k

ey to

con

tinua

llyse

arch

for a

cel

lula

r sig

nal u

ntil

one

isfo

und.

Thi

s pro

vide

s th

e us

er w

ith a

nop

portu

nity

to re

posi

tion

the

ante

nna

for o

ptim

um si

gnal

rece

ptio

n.

Ent

er

Pres

s the

[Ent

er] k

ey to

rest

art t

hem

odem

. Th

e mod

em w

ill d

isco

nnec

tfr

om th

e ne

twor

k, re

boot

, sea

rch

for a

sign

al, a

nd th

en re

conn

ect t

o th

ece

llula

r net

wor

k.

From

Com

mmu

nica

tions

Scr

een

for C

ellu

lar M

odem

s (1

of 3

)

ww

wA

cu-

Man

age

II

AK

110

Com

mun

icat

ions

Scr

een

for C

ellu

lar M

odem

s, R

ev 3

21 A

ug 2

008

122

Usi

ng th

e A

K11

0 K

eypa

d to

Ent

er a

n E-

mai

l Add

ress

Each

num

eric

key

is a

ssoc

iate

d w

ith th

ree

or m

ore

lette

rs o

f the

alp

habe

t, or

with

punc

tuat

ion

and

othe

r spe

cial

cha

ract

ers.

Succ

essi

ve k

eypre

sses

cyc

le th

roug

h th

eva

rious

cha

ract

ers a

ssoc

iate

d w

ith e

ach

key.

For

inst

ance

, pre

ss th

e [5

] key

onc

eto

dis

play

the n

umbe

r "5"

on-

scre

en.

Pres

s it a

seco

nd tim

e (w

hile

the

curs

or is

in th

e sa

me

posi

tion)

to d

ispl

ay th

e le

tter

"J".

The

third

key

pres

s di

spla

ys th

e le

tter

"K"

and

the

four

th ke

ypre

ss d

ispl

ays

the

lette

r "L"

. Pr

ess t

he k

ey o

ne m

ore

time

tore

turn

to th

e nu

mbe

r "5"

.

Each

of t

he a

rrow

keys

as

wel

l as

the

[Bac

k] a

nd [E

nter

] key

s pe

rfor

m s

peci

ficfu

nctio

ns w

ithin

the

E-m

ail A

ddre

ssSe

tup

Scre

en.

Pres

s the

up

arro

w ke

y to

del

ete

the

char

acte

r at t

he c

urso

r pos

ition

.Pr

ess t

he le

ft ar

row k

ey to

mov

e th

ecu

rsor

one

spac

e to

the

left.

Pres

s the

righ

t arro

w k

ey to

mov

e th

ecu

rsor

one

spac

e to

the

righ

t.Pr

ess t

he d

own

arro

w ke

y to

can

cel o

ut o

fth

e e-

mai

l add

ress

ent

ry p

roce

ss.

Pres

s the

[Bac

k] k

ey to

inse

rt a

bla

nksp

ace

at th

e cur

sor p

ositi

on.

Pres

s the

[Ent

er] k

ey to

con

firm

the

e-m

ail a

ddre

ss as

dis

play

ed o

n-sc

reen

.

1 Charles.lindbergh@ac

u-trol.com U

v-Cancel Back-Ins

1charles.lindbergh@ac

u-trol.com U

v-Cancel Back-Ins

Mov

ing

the

Cur

sor

E-m

ail A

ddre

ss, U

pper

Cas

e T

ext

E-m

ail A

ddre

ss, L

ower

Cas

e T

ext

E-m

ail A

ddre

ss, C

urso

r to

Rig

ht

1 charles.lindbergh@ac

u-trol.com u

v-Cancel Back-Ins

To c

hang

e be

twee

n up

per c

ase

and

low

er c

ase le

tters

, pre

ss th

e le

ft ar

row

key

unt

il th

ecu

rsor

is in

the

leftm

ost p

ositi

on, t

hen

press

the

left

arro

w k

ey o

nce

agai

n. T

he le

tter "

U"

in th

e lo

wer

righ

t cor

ner o

f the

dis

play

indi

cate

s w

heth

er s

ubse

quen

t tex

t ent

ered

will

be

low

er c

ase

or u

pper

cas

e.


u-trol.com U

v-Cancel Back-Ins

E-m

ail A

ddre

ss, C

urso

r to

Lef

t

An

uppe

r cas

e "U

" in

the

low

er ri

ght

corn

er o

f the

disp

lay

indi

cate

s th

atle

tters

ent

ered

in vi

a th

e ke

ypad

will

be d

ispl

ayed

in u

pper

cas

e.

A lo

wer

cas

e "u

" in

the

low

er ri

ght

corn

er o

f the

disp

lay

indi

cate

s th

atle

tters

ent

ered

in vi

a th

e ke

ypad

will

be d

ispl

ayed

in lo

wer

cas

e.

The

curs

or p

ositi

on is

indi

cate

d by

the

char

acte

r "1"

loca

ted

dire

ctly

abov

e th

e fir

st ch

arac

ter i

n th

e e-

mai

l add

ress

.Pr

ess t

he ri

ght a

rrow

key

to m

ove

the

curs

or o

ne s

pace

to th

e ri

ght.

The

curs

or h

as m

oved

one

spa

ce to

the

right

and

is n

ow p

ositi

oned

dire

ctly

abo

ve th

e se

cond

cha

ract

erin

the

e-m

ail a

ddre

ss.

Pres

s the

left

arro

w ke

y to

retu

rn th

ecu

rsor

to it

s pre

viou

s po

sitio

n.

Cha

ngin

g be

twee

n U

pper

and

Low

er C

ase

Lette

rs

1:moe.howard@+04

2:larry.fine@+04

3:curly.howard@+04

>4:acu-trol.com

A si

ngle

e-m

ail a

ddre

ss e

ntry

may

be

upto

29

char

acte

rs in

leng

th.

For l

onge

r e-

mai

l add

ress

es, i

t is

poss

ible

to "

split

" an

e-m

ail a

ddre

ss be

twee

n tw

o se

para

tead

dres

s boo

k en

trie

s. T

he m

eans

of

acco

mpl

ishi

ng th

is is

sho

wn

in E

xam

ple

1on

the

right

. Th

is fe

atur

e al

so p

rove

sus

eful

whe

n m

ultip

le e

-mai

l add

ress

essh

are

the s

ame

dom

ain

nam

e.

In th

e se

cond

exa

mpl

e on

the

righ

t, th

ree

high

ly p

rofe

ssio

nal p

ool s

ervi

ce p

erso

nnel

have

e-m

ail a

ddre

sses

whi

ch s

hare

the

sam

e "a

cu-tr

ol.c

om"

e-m

ail d

omai

n na

me.

The

dom

ain

nam

e (w

hich

com

pris

es th

ela

st p

ortio

n of

the

e-m

ail a

ddre

ss) i

ssl

otte

d in

to th

e fou

rth

addr

ess b

ook

entr

y.Ea

ch o

f the

three

indi

vidu

al e

-mai

lre

cipi

ents

are

give

n a

part

ial e

ntry

com

pris

ing

of th

e fir

st p

ortio

n of

thei

rre

spec

tive

e-m

ail a

ddre

sses

(do

not f

orge

tto

incl

ude

the

"@"

sym

bol.)

Eac

h en

try

incl

udes

a n

umer

ic po

inte

r (+0

4) a

dded

the

end

of th

e add

ress

ent

ry lo

catio

nw

here

the

dom

ain

nam

e re

side

s.

Whe

n an

e-m

ail i

s sen

t out

to a

ddre

ss 1

,th

e co

ntro

ller w

ill ap

pend

the

user

nam

e(m

oe.h

owar

d@) t

o th

e do

mai

n na

me

(acu

-trol

.com

) spe

cifie

d by

the

poin

ter

(+04

) whi

ch fo

llow

s th

e us

er n

ame.

Thus

, the

reco

nstru

cted

e-m

ail a

ddre

ssbe

com

es "

moe

.how

ard@

acu-

trol

.com

".Th

e sa

me

will

be

true

for a

ddre

ss e

ntri

es2

and

3.

1:john.jingleheimer

schmidt@+02

>2:acu-trol.com

3:

4:

Pars

ing

E-m

ail A

dres

s En

tries

Exa

mpl

e 2:

Sha

red

Dom

ain

Nam

e

Exa

mpl

e 1:

Lon

g E

-mai

l Add

ress

Due

to Jo

hn's

extra

ordi

nari

ly lo

ngsu

rnam

e, h

is en

tire

e-m

ail a

ddre

ssw

ill n

ot fi

t in a

sin

gle

addr

ess

book

entry

. To

wor

k ar

ound

this

, the

e-

mai

l add

ress

is s

plit

into

sep

arat

e"u

ser n

ame"

and

"dom

ain

nam

e"en

tries

, with

a nu

mer

ic p

oint

er to

conn

ect t

he tw

o.

Moe

, Lar

ry, a

nd C

urly

all s

hare

the

sam

e e-

mai

l dom

ain

nam

e. I

t is

ther

efor

e co

nven

ient

to g

ive

the

dom

ain

nam

e an

e-m

ail a

ddre

ssen

try o

f its

ow

n.

AK

110

Com

mun

icat

ions

Scr

een

for C

ellu

lar M

odem

s (3

of 3

)

Ent

er

Com

mun

icat

ions

, Syn

c B

yte

1S

ync

Byt

e 1

Scr

een

Ent

er

Use

the

keyp

ad to

ent

er a

num

ber f

rom

0 to

255

. Th

is is

the

seco

nd s

ync

byte

for c

ontro

ller c

omm

unic

atio

ns s

ecur

ity.

Pres

s the

[Ent

er] k

ey to

con

firm

or t

hedo

wn

arro

w k

ey to

can

cel.

Com

mun

icat

ions

, Syn

c B

yte

2S

ync

Byt

e 2

Ent

ry S

cree

nEnter new value

Current: 204

204

v-Cancel ^

Enter new value

Current: 203

203

v-Cancel ^

Use

the

keyp

ad to

ent

er a

num

ber f

rom

0 to

255

. Th

is is

the

first

syn

c by

te fo

rco

ntro

ller c

omm

unic

atio

ns s

ecur

ity.

Pres

s the

[Ent

er] k

ey to

con

firm

or t

hedo

wn

arro

w k

ey to

can

cel.

The

Mod

em D

iagn

ostic

s Scr

een

disp

lays

mod

em c

onfig

urat

ion

data

that

such

as t

he m

odem

initi

aliz

atio

nst

ring.

Thi

s dat

a is

inte

nded

for u

se b

yqu

alifi

ed se

rvic

e pe

rson

nel.

Com

mun

icat

ions

, Dia

gnos

tics

Mod

em D

iagn

ostic

s S

cree

n Modem (Cellular)

Email Test

Email Addresses

Advanced Setup

>Diagnostics

Sync Byte1: 203

Sync Byte2: 204

at+CGATT=1 xx

48 123

Ent

er

Bac

k

Sho

rtcut

to th

e A

dvan

ced

Set

up S

cree

n

The

Adva

nced

Set

up S

cree

n m

ayqu

ickl

y be

acce

ssed

from

the

Mod

em D

iagn

ostic

s Scr

een

bypr

essi

ng th

e [6

] sho

rtcu

t key

.

Modem (Cellular)

Email Test

Email Addresses

Advanced Setup

Diagnostics

>Sync Byte1: 203

Sync Byte2: 204

Modem (Cellular)

Email Test

Email Addresses

Advanced Setup

Diagnostics

Sync Byte1: 203

>Sync Byte2: 204

From

Com

mmu

nica

tions

Scr

een

for C

ellu

lar M

odem

s (1

of 3

)To

Com

mm

unic

atio

ns S

cree

nfo

r Cel

lula

r Mod

ems

(2 o

f 3)

T U

V89

W X

Y Z

P Q

R S7 G

H I4

J K

L5M

N O6

A B

C2D

E F3

!$%&̂

*+1

,-#.@

_0C

onfir

m

ENTE

RB

AC

KIn

sert

L E F T

R I G H T

DEL

ETE

CA

NC

EL

6

AK

110

Com

mun

icat

ions

Scr

een

for C

ellu

lar M

odem

s, R

ev 3

21 A

ug 2

008

123

Usi

ng th

e A

K11

0 K

eypa

d to

Ent

er a

n E-

mai

l Add

ress

Each

num

eric

key

is a

ssoc

iate

d w

ith th

ree

or m

ore

lette

rs o

f the

alp

habe

t, or

with

punc

tuat

ion

and

othe

r spe

cial

cha

ract

ers.

Succ

essi

ve k

eypre

sses

cyc

le th

roug

h th

eva

rious

cha

ract

ers a

ssoc

iate

d w

ith e

ach

key.

For

inst

ance

, pre

ss th

e [5

] key

onc

eto

dis

play

the n

umbe

r "5"

on-

scre

en.

Pres

s it a

seco

nd tim

e (w

hile

the

curs

or is

in th

e sa

me

posi

tion)

to d

ispl

ay th

e le

tter

"J".

The

third

key

pres

s di

spla

ys th

e le

tter

"K"

and

the

four

th ke

ypre

ss d

ispl

ays

the

lette

r "L"

. Pr

ess t

he k

ey o

ne m

ore

time

tore

turn

to th

e nu

mbe

r "5"

.

Each

of t

he a

rrow

keys

as

wel

l as

the

[Bac

k] a

nd [E

nter

] key

s pe

rfor

m s

peci

ficfu

nctio

ns w

ithin

the

E-m

ail A

ddre

ssSe

tup

Scre

en.

Pres

s the

up

arro

w ke

y to

del

ete

the

char

acte

r at t

he c

urso

r pos

ition

.Pr

ess t

he le

ft ar

row k

ey to

mov

e th

ecu

rsor

one

spac

e to

the

left.

Pres

s the

righ

t arro

w k

ey to

mov

e th

ecu

rsor

one

spac

e to

the

righ

t.Pr

ess t

he d

own

arro

w ke

y to

can

cel o

ut o

fth

e e-

mai

l add

ress

ent

ry p

roce

ss.

Pres

s the

[Bac

k] k

ey to

inse

rt a

bla

nksp

ace

at th

e cur

sor p

ositi

on.

Pres

s the

[Ent

er] k

ey to

con

firm

the

e-m

ail a

ddre

ss as

dis

play

ed o

n-sc

reen

.

1 Charles.lindbergh@ac

u-trol.com U

v-Cancel Back-Ins

1charles.lindbergh@ac

u-trol.com U

v-Cancel Back-Ins

Mov

ing

the

Cur

sor

E-m

ail A

ddre

ss, U

pper

Cas

e T

ext

E-m

ail A

ddre

ss, L

ower

Cas

e T

ext

E-m

ail A

ddre

ss, C

urso

r to

Rig

ht


u-trol.com u

v-Cancel Back-Ins

To c

hang

e be

twee

n up

per c

ase

and

low

er c

ase le

tters

, pre

ss th

e le

ft ar

row

key

unt

il th

ecu

rsor

is in

the

leftm

ost p

ositi

on, t

hen

press

the

left

arro

w k

ey o

nce

agai

n. T

he le

tter "

U"

in th

e lo

wer

righ

t cor

ner o

f the

dis

play

indi

cate

s w

heth

er s

ubse

quen

t tex

t ent

ered

will

be

low

er c

ase

or u

pper

cas

e.


u-trol.com U

v-Cancel Back-Ins

E-m

ail A

ddre

ss, C

urso

r to

Lef

t

An

uppe

r cas

e "U

" in

the

low

er ri

ght

corn

er o

f the

disp

lay

indi

cate

s th

atle

tters

ent

ered

in vi

a th

e ke

ypad

will

be d

ispl

ayed

in u

pper

cas

e.

A lo

wer

cas

e "u

" in

the

low

er ri

ght

corn

er o

f the

disp

lay

indi

cate

s th

atle

tters

ent

ered

in vi

a th

e ke

ypad

will

be d

ispl

ayed

in lo

wer

cas

e.

The

curs

or p

ositi

on is

indi

cate

d by

the

char

acte

r "1"

loca

ted

dire

ctly

abov

e th

e fir

st ch

arac

ter i

n th

e e-

mai

l add

ress

.Pr

ess t

he ri

ght a

rrow

key

to m

ove

the

curs

or o

ne s

pace

to th

e ri

ght.

The

curs

or h

as m

oved

one

spa

ce to

the

right

and

is n

ow p

ositi

oned

dire

ctly

abo

ve th

e se

cond

cha

ract

erin

the

e-m

ail a

ddre

ss.

Pres

s the

left

arro

w ke

y to

retu

rn th

ecu

rsor

to it

s pre

viou

s po

sitio

n.

Cha

ngin

g be

twee

n U

pper

and

Low

er C

ase

Lette

rs

1:moe.howard@+04

2:larry.fine@+04

3:curly.howard@+04

>4:acu-trol.com

A si

ngle

e-m

ail a

ddre

ss e

ntry

may

be

upto

29

char

acte

rs in

leng

th.

For l

onge

r e-

mai

l add

ress

es, i

t is

poss

ible

to "

split

" an

e-m

ail a

ddre

ss be

twee

n tw

o se

para

tead

dres

s boo

k en

trie

s. T

he m

eans

of

acco

mpl

ishi

ng th

is is

sho

wn

in E

xam

ple

1on

the

right

. Th

is fe

atur

e al

so p

rove

sus

eful

whe

n m

ultip

le e

-mai

l add

ress

essh

are

the s

ame

dom

ain

nam

e.

In th

e se

cond

exa

mpl

e on

the

righ

t, th

ree

high

ly p

rofe

ssio

nal p

ool s

ervi

ce p

erso

nnel

have

e-m

ail a

ddre

sses

whi

ch s

hare

the

sam

e "a

cu-tr

ol.c

om"

e-m

ail d

omai

n na

me.

The

dom

ain

nam

e (w

hich

com

pris

es th

ela

st p

ortio

n of

the

e-m

ail a

ddre

ss) i

ssl

otte

d in

to th

e fou

rth

addr

ess b

ook

entr

y.Ea

ch o

f the

three

indi

vidu

al e

-mai

lre

cipi

ents

are

give

n a

part

ial e

ntry

com

pris

ing

of th

e fir

st p

ortio

n of

thei

rre

spec

tive

e-m

ail a

ddre

sses

(do

not f

orge

tto

incl

ude

the

"@"

sym

bol.)

Eac

h en

try

incl

udes

a n

umer

ic po

inte

r (+0

4) a

dded

the

end

of th

e add

ress

ent

ry lo

catio

nw

here

the

dom

ain

nam

e re

side

s.

Whe

n an

e-m

ail i

s sen

t out

to a

ddre

ss 1

,th

e co

ntro

ller w

ill ap

pend

the

user

nam

e(m

oe.h

owar

d@) t

o th

e do

mai

n na

me

(acu

-trol

.com

) spe

cifie

d by

the

poin

ter

(+04

) whi

ch fo

llow

s th

e us

er n

ame.

Thus

, the

reco

nstru

cted

e-m

ail a

ddre

ssbe

com

es "

moe

.how

ard@

acu-

trol

.com

".Th

e sa

me

will

be

true

for a

ddre

ss e

ntri

es2

and

3.

1:john.jingleheimer

schmidt@+02

>2:acu-trol.com

3:

4:

Pars

ing

E-m

ail A

dres

s En

tries

Exa

mpl

e 2:

Sha

red

Dom

ain

Nam

e

Exa

mpl

e 1:

Lon

g E

-mai

l Add

ress

Due

to Jo

hn's

extra

ordi

nari

ly lo

ngsu

rnam

e, h

is en

tire

e-m

ail a

ddre

ssw

ill n

ot fi

t in a

sin

gle

addr

ess

book

entry

. To

wor

k ar

ound

this

, the

e-

mai

l add

ress

is s

plit

into

sep

arat

e"u

ser n

ame"

and

"dom

ain

nam

e"en

tries

, with

a nu

mer

ic p

oint

er to

conn

ect t

he tw

o.

Moe

, Lar

ry, a

nd C

urly

all s

hare

the

sam

e e-

mai

l dom

ain

nam

e. I

t is

ther

efor

e co

nven

ient

to g

ive

the

dom

ain

nam

e an

e-m

ail a

ddre

ssen

try o

f its

ow

n.

AK

110

Com

mun

icat

ions

Scr

een

for C

ellu

lar M

odem

s (3

of 3

)

Ent

er

Com

mun

icat

ions

, Syn

c B

yte

1S

ync

Byt

e 1

Scr

een

Ent

er

Use

the

keyp

ad to

ent

er a

num

ber f

rom

0 to

255

. Th

is is

the

seco

nd s

ync

byte

for c

ontro

ller c

omm

unic

atio

ns s

ecur

ity.

Pres

s the

[Ent

er] k

ey to

con

firm

or t

hedo

wn

arro

w k

ey to

can

cel.

Com

mun

icat

ions

, Syn

c B

yte

2S

ync

Byt

e 2

Ent

ry S

cree

nEnter new value

Current: 204

204

v-Cancel ^

Enter new value

Current: 203

203

v-Cancel ^

Use

the

keyp

ad to

ent

er a

num

ber f

rom

0 to

255

. Th

is is

the

first

syn

c by

te fo

rco

ntro

ller c

omm

unic

atio

ns s

ecur

ity.

Pres

s the

[Ent

er] k

ey to

con

firm

or t

hedo

wn

arro

w k

ey to

can

cel.

The

Mod

em D

iagn

ostic

s Scr

een

disp

lays

mod

em c

onfig

urat

ion

data

that

such

as t

he m

odem

initi

aliz

atio

nst

ring.

Thi

s dat

a is

inte

nded

for u

se b

yqu

alifi

ed se

rvic

e pe

rson

nel.

Com

mun

icat

ions

, Dia

gnos

tics

Mod

em D

iagn

ostic

s S

cree

n Modem (Cellular)

Email Test

Email Addresses

Advanced Setup

>Diagnostics

Sync Byte1: 203

Sync Byte2: 204

at+CGATT=1 xx

48 123

Ent

er

Bac

k

Sho

rtcut

to th

e A

dvan

ced

Set

up S

cree

n

The

Adva

nced

Set

up S

cree

n m

ayqu

ickl

y be

acce

ssed

from

the

Mod

em D

iagn

ostic

s Scr

een

bypr

essi

ng th

e [6

] sho

rtcu

t key

.

Modem (Cellular)

Email Test

Email Addresses

Advanced Setup

Diagnostics

>Sync Byte1: 203

Sync Byte2: 204

Modem (Cellular)

Email Test

Email Addresses

Advanced Setup

Diagnostics

Sync Byte1: 203

>Sync Byte2: 204

From

Com

mmu

nica

tions

Scr

een

for C

ellu

lar M

odem

s (1

of 3

)To

Com

mm

unic

atio

ns S

cree

nfo

r Cel

lula

r Mod

ems

(2 o

f 3)

T U

V89

W X

Y Z

P Q

R S7 G

H I4

J K

L5M

N O6

A B

C2D

E F3

!$%&̂

*+1

,-#.@

_0C

onfir

m

ENTE

RB

AC

KIn

sert

L E F T

R I G H T

DEL

ETE

CA

NC

EL

6

AK

110

Com

mun

icat

ions

Scr

een

for C

ellu

lar M

odem

s, R

ev 3

21 A

ug 2

008

124

pH

> 7.67-OFF 7.50s

ORP 490 -OFF 700s

_____

69.0f SW1OFFSW2OFF

Mai

n St

atus

Scr

een

Name:Main Pool

System

Programming

Service

Data ( 8:441 )

Communications

>Security Setup

Wizards

Serial # 123456

Con

figur

ation

Men

u, S

ecur

ity S

etup

AK

110

Sec

urity

Set

up S

cree

n N

avig

atio

n

Ent

er N

ew P

assw

ord

Scr

een

Ent

erB

ack

-Password Setup-

>Master: 0

Service:0

Clear All Passwords

Sec

urity

Set

up, M

aste

r P

assw

ord

Enter Password

Current: 0

0

v-Cancel ^

Ent

er N

ew P

assw

ord

Scr

een

-Password Setup-

Master: 8675309

>Service:0

Clear All Passwords

Sec

urity

Set

up, S

ervi

ce P

assw

ord

-Confirm Changes -

Clear ALL passwords?

NO:7 9:YES

Cle

ar A

ll Pas

swor

ds S

cree

n

Pres

s the

[9] k

ey to

clea

r the

mas

ter a

nd se

rvic

e se

curi

typa

ssw

ords

or t

he [7

] key

toca

ncel

.

-Password Setup-

Master: 8675309

Service:1776

>Clear All Passwords

Sec

urity

Set

up, C

lear

All

Pas

swor

ds

Ent

er 97 or

Ent

er

Ent

er

Enter Password

Current: 0

0

v-Cancel ^

Use

the

keyp

ad to

ent

er th

e m

aste

rpa

ssw

ord,

up

to 9

digi

ts in

leng

th.

Pres

s the

[Ent

er] k

ey to

con

firm

or

the

dow

n ar

row

key

to c

ance

l.

Use

the

keyp

ad to

ent

er th

e se

rvic

epa

ssw

ord,

up

to 9

digi

ts in

leng

th.

Pres

s the

[Ent

er] k

ey to

con

firm

or

the

dow

n ar

row

key

to c

ance

l.

Up

to tw

o le

vels

of s

ecur

ity m

ay b

eim

plem

ente

d on

the

AK

110

cont

rolle

r.

The

Mas

ter

pass

wor

d ena

bles

acc

ess

toal

l con

trolle

r fun

ctio

ns a

nd m

enus

. A

mas

ter p

assw

ord m

ay b

e im

plem

ente

dal

one,

or i

n co

njun

tion

with

a s

ervi

cepa

ssw

ord.

The

mor

e lim

ited

Serv

ice

pass

wor

dal

low

s acc

ess t

o sen

sor c

alib

ratio

n sc

reen

sfr

om th

e M

ain

Stat

us S

cree

n. A

ser

vice

pass

wor

d m

ay b

e im

plem

ente

d on

ly a

fter

a m

aste

r pas

swor

d ha

s be

en im

plem

ente

d.

The

pass

wor

d ch

osen

by

the

user

issi

mpl

y a

num

ber,

cons

istin

g of

am

inim

um o

f one

dig

it an

d a

max

imum

of

nine

dig

its.

Ther

e are

, how

ever

, a fe

wre

stric

tions

whe

n ch

oosi

ng a

pas

swor

d:

1. T

he p

assw

ord

may

not b

egin

with

aze

ro [0

] as t

he fi

rst d

igit.

2. T

he se

curit

y pa

ssw

ord

mus

t be

in th

era

nge

of "

1" to

"99

9999

999"

, with

the

exce

ptio

n of

two r

eser

ved

num

ber r

ange

s.

3. T

he n

umbe

rs in

the

rang

es o

f 900

0 to

9100

and

927

6100

to 9

276

110

are

rese

rved

and

can

not b

e us

ed fo

r sec

urity

pass

wor

d pu

rpos

es.

Bot

h pa

ssw

ords

may

be

clea

red

sim

ulta

neou

sly,

by s

elec

ting

the

Cle

ar A

llPa

ssw

ords

opt

ion

on th

e Se

curi

ty S

etup

Scre

en.

This

eff

ectiv

ely

turn

s of

f the

AK

110

secu

rity

feat

ure.

Alte

rnat

ivel

y,en

terin

g a

pass

oword

of "

0" w

ill d

isab

leth

e pa

sswo

rd fe

atur

e.

In o

rder

for t

he p

assw

ords

to b

e cl

eare

d,th

e us

er m

ust h

ave

first

ent

ered

in a

mas

ter p

assw

ord t

o ga

in a

cces

s to

the

Secu

rity

Set

up S

cree

n.

pH

> 7.67-OFF 7.50s

ORP 490 -OFF 700s

_____

69.0f SW1OFFSW2OFF

Mai

n S

tatu

s, c

urso

r at

pH

val

ue

Enter new value

Current: 7.67

7.67

v-Cancel ^

Cal

ibra

tion

Scr

een,

pH

Enter Password

Enter:

v-Cancel

Pas

swor

d P

rom

pt S

cree

n

Enter Password

Enter: ****

v-Cancel

Pas

swor

d D

ispla

yed

as A

ster

isks

Ent

er

Use

Key

pad

toE

nter

Pas

swor

d

>Name:Main Pool

System

Programming

Service

Data ( 8:441 )

Communications

Security Setup

Wizards

Serial # 123456

pH

> 7.67-OFF 7.50s

ORP 490 -OFF 700s

_____

69.0f SW1OFFSW2OFF

Mai

n St

atus

Scr

een

Con

figur

atio

n M

enu

Scr

een

Enter Password

Enter:

v-Cancel

Pas

swor

d P

rom

pt S

cree

n

Enter Password

Enter: ********

v-Cancel

Pas

swor

d D

ispla

yed

as A

ster

isks

Ent

er

Use

Key

pad

toE

nter

Pas

swor

d

Usi

ng th

e A

K11

0 Se

curit

y Pa

ssw

ord

Feat

ure

Serv

ice

Pass

wor

d Ex

ampl

eM

aste

r Pas

swor

d Ex

ampl

e

Bac

k

Bac

kE

nter

AK

110

Sec

urity

Set

up S

cree

n N

avig

atio

n, R

ev 3

21 A

ug 2

00810.27

125

pH

> 7.67-OFF 7.50s

ORP 490 -OFF 700s

_____

69.0f SW1OFFSW2OFF

Mai

n St

atus

Scr

een

Name:Main Pool

System

Programming

Service

Data ( 8:441 )

Communications

>Security Setup

Wizards

Serial # 123456

Con

figur

ation

Men

u, S

ecur

ity S

etup

AK

110

Sec

urity

Set

up S

cree

n N

avig

atio

n

Ent

er N

ew P

assw

ord

Scr

een

Ent

erB

ack

-Password Setup-

>Master: 0

Service:0

Clear All Passwords

Sec

urity

Set

up, M

aste

r P

assw

ord

Enter Password

Current: 0

0

v-Cancel ^

Ent

er N

ew P

assw

ord

Scr

een

-Password Setup-

Master: 8675309

>Service:0

Clear All Passwords

Sec

urity

Set

up, S

ervi

ce P

assw

ord

-Confirm Changes -

Clear ALL passwords?

NO:7 9:YES

Cle

ar A

ll Pas

swor

ds S

cree

n

Pres

s the

[9] k

ey to

clea

r the

mas

ter a

nd se

rvic

e se

curi

typa

ssw

ords

or t

he [7

] key

toca

ncel

.

-Password Setup-

Master: 8675309

Service:1776

>Clear All Passwords

Sec

urity

Set

up, C

lear

All

Pas

swor

ds

Ent

er 97 or

Ent

er

Ent

er

Enter Password

Current: 0

0

v-Cancel ^

Use

the

keyp

ad to

ent

er th

e m

aste

rpa

ssw

ord,

up

to 9

digi

ts in

leng

th.

Pres

s the

[Ent

er] k

ey to

con

firm

or

the

dow

n ar

row

key

to c

ance

l.

Use

the

keyp

ad to

ent

er th

e se

rvic

epa

ssw

ord,

up

to 9

digi

ts in

leng

th.

Pres

s the

[Ent

er] k

ey to

con

firm

or

the

dow

n ar

row

key

to c

ance

l.

Up

to tw

o le

vels

of s

ecur

ity m

ay b

eim

plem

ente

d on

the

AK

110

cont

rolle

r.

The

Mas

ter

pass

wor

d ena

bles

acc

ess

toal

l con

trolle

r fun

ctio

ns a

nd m

enus

. A

mas

ter p

assw

ord m

ay b

e im

plem

ente

dal

one,

or i

n co

njun

tion

with

a s

ervi

cepa

ssw

ord.

The

mor

e lim

ited

Serv

ice

pass

wor

dal

low

s acc

ess t

o sen

sor c

alib

ratio

n sc

reen

sfr

om th

e M

ain

Stat

us S

cree

n. A

ser

vice

pass

wor

d m

ay b

e im

plem

ente

d on

ly a

fter

a m

aste

r pas

swor

d ha

s be

en im

plem

ente

d.

The

pass

wor

d ch

osen

by

the

user

issi

mpl

y a

num

ber,

cons

istin

g of

am

inim

um o

f one

dig

it an

d a

max

imum

of

nine

dig

its.

Ther

e are

, how

ever

, a fe

wre

stric

tions

whe

n ch

oosi

ng a

pas

swor

d:

1. T

he p

assw

ord

may

not b

egin

with

aze

ro [0

] as t

he fi

rst d

igit.

2. T

he se

curit

y pa

ssw

ord

mus

t be

in th

era

nge

of "

1" to

"99

9999

999"

, with

the

exce

ptio

n of

two r

eser

ved

num

ber r

ange

s.

3. T

he n

umbe

rs in

the

rang

es o

f 900

0 to

9100

and

927

6100

to 9

2761

10 a

rere

serv

ed a

nd c

anno

t be

used

for s

ecur

itypa

ssw

ord

purp

oses

.

Bot

h pa

ssw

ords

may

be

clea

red

sim

ulta

neou

sly,

by s

elec

ting

the

Cle

ar A

llPa

ssw

ords

opt

ion

on th

e Se

curi

ty S

etup

Scre

en.

This

eff

ectiv

ely

turn

s of

f the

AK

110

secu

rity

feat

ure.

Alte

rnat

ivel

y,en

terin

g a

pass

oword

of "

0" w

ill d

isab

leth

e pa

sswo

rd fe

atur

e.

In o

rder

for t

he p

assw

ords

to b

e cl

eare

d,th

e us

er m

ust h

ave

first

ent

ered

in a

mas

ter p

assw

ord t

o ga

in a

cces

s to

the

Secu

rity

Set

up S

cree

n.

pH

> 7.67-OFF 7.50s

ORP 490 -OFF 700s

_____

69.0f SW1OFFSW2OFF

Mai

n S

tatu

s, c

urso

r at

pH

val

ue

Enter new value

Current: 7.67

7.67

v-Cancel ^

Cal

ibra

tion

Scr

een,

pH

Enter Password

Enter:

v-Cancel

Pas

swor

d P

rom

pt S

cree

n

Enter Password

Enter: ****

v-Cancel

Pas

swor

d D

ispla

yed

as A

ster

isks

Ent

er

Use

Key

pad

toE

nter

Pas

swor

d

>Name:Main Pool

System

Programming

Service

Data ( 8:441 )

Communications

Security Setup

Wizards

Serial # 123456

pH

> 7.67-OFF 7.50s

ORP 490 -OFF 700s

_____

69.0f SW1OFFSW2OFF

Mai

n St

atus

Scr

een

Con

figur

atio

n M

enu

Scr

een

Enter Password

Enter:

v-Cancel

Pas

swor

d P

rom

pt S

cree

n

Enter Password

Enter: ********

v-Cancel

Pas

swor

d D

ispla

yed

as A

ster

isks

Ent

er

Use

Key

pad

toE

nter

Pas

swor

d

Usi

ng th

e A

K11

0 Se

curit

y Pa

ssw

ord

Feat

ure

Serv

ice

Pass

wor

d Ex

ampl

eM

aste

r Pas

swor

d Ex

ampl

e

Bac

k

Bac

kE

nter

AK

110

Sec

urity

Set

up S

cree

n N

avig

atio

n, R

ev 3

21 A

ug 2

008

126

Pres

s the

[Ente

r] k

ey to

set

the

AKC

olor

™ m

easu

rmen

t cyc

le ti

me

from

3 m

inut

es to

15

min

utes

, in

1m

inut

e in

crem

ents

.

AK

110

AK

Col

or™

Scr

een

Nav

igat

ion

The

AK

110

cont

rolle

r may

be

confi

gure

d to

inte

rfac

e w

ith th

e Ac

u-Tr

ol A

KC

olor

™C

olor

imet

ric

Sens

or.

This

requ

ires t

he in

stal

latio

n of

an

optio

nal c

olor

imet

ric

PPM

-ca

pabl

e se

nsor

car

d in

pla

ce o

f the

stan

dard

pH

/OR

P/T

empe

ratu

re s

enso

r car

d.

The

AK

110,

whe

n in

terf

aced

to a

n AK

Col

or™

sens

or, m

ay o

nly m

ake

mea

sure

men

tsfo

r "fr

ee"

chlo

rine

PPM

, eve

n if

the

AKC

olor

™ is

equ

ippe

d to

mak

e "t

otal

" ch

lori

nePP

M m

easu

rem

ents

as

wel

l.

Whe

n th

e AK

Col

or™

with

ORP

bac

kup

sens

or c

ard

is in

stall

ed in

the

cont

rolle

r, it

isau

tom

atic

ally

det

ecte

d up

on p

ower

-up.

The

type

of s

enso

r car

d de

tect

ed w

illde

term

ine

whi

ch se

nsor

read

ings

or m

enu o

ptio

ns a

re a

vaila

ble

to th

e us

er.

The

varia

tions

of t

he u

ser i

nter

face

with

an

AKC

olor

™ w

ith O

RP b

acku

p se

nsor

car

d ar

eou

tline

d on

this

pag

e.

A p

rimar

y di

ffer

ence

is th

e su

ppla

nting

of t

he d

efau

lt O

RP

mea

sure

men

t-bas

ed c

ontr

olw

ith P

PM m

easu

rem

ent-b

ased

cont

rol o

f rel

ay 2

. W

ith a

n AK

Col

or™

with

OR

Pba

ckup

sens

or c

ard

inst

alle

d, th

e A

K11

0 w

ill c

ontr

ol re

lay

2 ba

sed

upon

PPM

mea

sure

men

ts a

s lon

g as

the

DPD

level

is e

stim

ated

to b

e ab

ove

0%.

Whe

n th

ees

timat

ed D

PD le

vel d

rops

to 0

%, r

elay

2 w

ill in

stea

d be

con

trol

led

base

d up

on O

RP

mea

sure

men

ts.

Con

figur

atio

n op

tions

for t

he A

KC

olor

™ se

nsor

are

mad

e ava

ilabl

e on

the

Con

figur

atio

n M

enu

Scre

en.

The

stat

us o

f the

AK

Col

or™

sens

or is

disp

laye

d on

the

AKC

olor

™St

atus

Scr

een,

whi

ch is

eas

ily a

cces

sibl

e fr

om th

e M

ain

Stat

us S

cree

n.

Mai

n S

tatu

s S

cree

n, A

KC

olor

™>Name:Main Pool

System

Programming

Service

Data ( 8:441 )

Communications

Security Setup

Wizards

AKCOLOR

Con

figur

ation

Men

u, C

ontr

olle

r N

ame

pH

> 7.67-OFF 7.50s

PPM 2.65-OFF 2.00s

_____

69.0f SW1OFFSW2OFF

AK

Col

or™

Sta

tus

Scr

een

FREE= 2.65 75/320

MixingDPD

lvl= 90%

CLRv= 3.48 v= 1.98

Name:Main Pool

System

Programming

Service

>Data ( 8:441 )

Communications

Security Setup

Wizards

AKCOLOR

Serial # 123456

Con

figur

atio

n M

enu,

Dat

aD

ata

Dis

play

Scr

een

07/04 pH PPM Temp

12:00 7.53 2.88 76.

10:00 7.45 3.02 75.

08:00 7.42 3.14 75.

06:00 7.45 2.06 76.

04:00 7.59 1.95 77.

02:00 7.60 1.81 76.

00:00 7.64 1.72 75.

22:00 7.68 1.99 75.

Name:Main Pool

System

Programming

Service

Data ( 8:441 )

Communications

Security Setup

Wizards

>AKCOLOR

Serial # 123456

Con

figur

atio

n M

enu,

AK

Col

or™

Ent

er

Bac

k

AK

Col

or™

Con

fig, D

PD

Lev

el 0

%>DPD Level: 0%

TYPE: Free Only

Cycle (min): 4

Manual Control

Ent

er

AK

Col

or™

Con

fig, D

PD

Lev

el 1

00%

>DPD Level: 100%

TYPE: Free Only

Cycle (min): 4

Manual Control

AK

Col

or™

Con

fig, D

PD

Lev

el 0

% DPD Level: 0%

>TYPE: Free Only

Cycle (min): 4

Manual Control

AK

Col

or™

Con

fig, 4

Min

ute

Cyc

le DPD Level: 0%

TYPE: Free Only

>Cycle (min): 4

Manual Control

Ent

er

AK

Col

or™

Con

fig, 5

Min

ute

Cyc

le DPD Level: 0%

TYPE: Free Only

Cycle (min): 5

Manual Control

AK

Col

or™

Con

fig, M

anua

l Con

trol

DPD Level: 0%

TYPE: Free Only

Cycle (min): 4

>Manual Control

Ent

er

AK

Col

or™

Man

ual C

ontr

ol S

cree

nAKCOLOR Ctl: v=1.98

0=BUFF 1=DPD

2=Flow 3=OFF

4=TOT 8=AllOn

Col

orim

etric

PPM

read

ings

are

disp

laye

d in

the

thir

d co

lum

n of

the

Dat

a D

ispl

ay S

cree

n.

Pres

s the

[Ente

r] k

ey to

set

the

estim

ated

rem

ainin

g D

PD re

agen

tle

vel f

rom

0%

to 10

0%, i

n va

ryin

gin

crem

ents

.

The

AKC

olor

™ S

tatu

s Sc

reen

disp

lays

the

sens

or s

tatu

s, c

lear

and

DPD

-mix

ed v

olta

ge le

vels

, and

the

calc

ulat

ed fr

ee c

hlor

ine

PPM

.

The

AK

110

cont

rolle

r is

limite

d to

taki

ng "

free

" ch

lori

ne P

PMm

easu

rem

ents

with

the

AKC

olor

™se

nsor

.

The

AKC

olor

™ M

anua

l Con

trol

Scre

en a

llow

s for

man

ual u

ser c

ontr

olof

the

AKC

olor

™ so

leno

ids

for s

etup

and

troub

lesh

ootin

g pu

rpos

es.

Bac

k

Mai

n S

tatu

s S

cree

n, A

KC

olor

™ E

mpt

ypH

> 7.67-OFF 7.50s

PPM 2.65-OFF err

_____

69.0f SW1OFFSW2OFF

Mai

n S

tatu

s S

cree

n, O

RP

Sho

wn

pH

> 7.67-OFF 7.50s

ORP 490 -OFF 700s

_____

69.0f SW1OFFSW2OFF

The

AK

110

Con

trol

ler a

nd th

e A

KC

olor

™ S

enso

rVi

ewin

g PP

M a

nd O

RP

Mea

sure

men

ts a

nd S

etpo

ints

PPM

mea

sure

men

t and

"er

ror

cond

ition

" sho

wn

on th

e di

spla

yse

cond

row

indic

ates

an

empt

y bo

ttle.

OR

P m

easu

rem

ent a

nd s

etpo

int

show

n on

the d

ispl

ay s

econ

d ro

w a

sno

rmal

. O

RP

now

con

trol

s re

lay

2.

Whe

n an

AK

Col

or™

with

OR

P ba

ckup

sens

or m

odul

e is

inst

alle

d, th

e se

cond

row

of

the

disp

lay

will

alte

rnat

e be

tween

sho

win

g PP

M a

nd O

RP

info

rmat

ion.

Whe

nch

emic

als a

re e

stim

ated

to b

e pr

esen

t in

the

AKC

olor

™, t

he P

PM m

easu

rem

ent a

ndse

tpoi

nt w

ill b

oth

be d

ispl

ayed

.

Whe

n th

e A

K11

0 es

timat

es th

at th

e DPD

and

buf

fer s

olut

ions

hav

e be

en c

onsu

med

,th

e PP

M m

easu

rem

ent i

s sho

wn,

but t

he s

etpo

int d

ispl

ays

an e

rror

con

ditio

n.

Mai

n S

tatu

s S

cree

n, P

PM

Sho

wn

pH

> 7.67-OFF 7.50s

PPM 2.65-OFF 2.00s

_____

69.0f SW1OFFSW2OFF

Mai

n S

tatu

s S

cree

n, O

RP

Sho

wn

pH

> 7.67-OFF 7.50s

ORP 490 -OFF 700s

_____

69.0f SW1OFFSW2OFF

PPM

mea

sure

men

t and

set

poin

tsh

own

on th

e se

cond

dis

play

row

.R

elay

2 is

con

trolle

d by

PPM

.

OR

P m

easu

rem

ent a

nd s

etpo

int

show

n on

the

seco

nd d

ispl

ay ro

w.

Rel

ay 2

is st

ill co

ntro

lled

by P

PM.

AK

110

AK

Col

or S

cree

n N

avig

atio

n, R

ev 3

21 A

ug 2

008

10.28

127

Pres

s the

[Ente

r] k

ey to

set

the

AKC

olor

™ m

easu

rmen

t cyc

le ti

me

from

3 m

inut

es to

15

min

utes

, in

1m

inut

e in

crem

ents

.

AK

110

AK

Col

or™

Scr

een

Nav

igat

ion

The

AK

110

cont

rolle

r may

be

confi

gure

d to

inte

rfac

e w

ith th

e Ac

u-Tr

ol A

KC

olor

™C

olor

imet

ric

Sens

or.

This

requ

ires t

he in

stal

latio

n of

an

optio

nal c

olor

imet

ric

PPM

-ca

pabl

e se

nsor

car

d in

pla

ce o

f the

stan

dard

pH

/OR

P/T

empe

ratu

re s

enso

r car

d.

The

AK

110,

whe

n in

terf

aced

to a

n AK

Col

or™

sens

or, m

ay o

nly m

ake

mea

sure

men

tsfo

r "fr

ee"

chlo

rine

PPM

, eve

n if

the

AKC

olor

™ is

equ

ippe

d to

mak

e "t

otal

" ch

lori

nePP

M m

easu

rem

ents

as

wel

l.

Whe

n th

e AK

Col

or™

with

ORP

bac

kup

sens

or c

ard

is in

stall

ed in

the

cont

rolle

r, it

isau

tom

atic

ally

det

ecte

d up

on p

ower

-up.

The

type

of s

enso

r car

d de

tect

ed w

illde

term

ine

whi

ch se

nsor

read

ings

or m

enu o

ptio

ns a

re a

vaila

ble

to th

e us

er.

The

varia

tions

of t

he u

ser i

nter

face

with

an

AKC

olor

™ w

ith O

RP b

acku

p se

nsor

car

d ar

eou

tline

d on

this

pag

e.

A p

rimar

y di

ffer

ence

is th

e su

ppla

nting

of t

he d

efau

lt O

RP

mea

sure

men

t-bas

ed c

ontr

olw

ith P

PM m

easu

rem

ent-b

ased

cont

rol o

f rel

ay 2

. W

ith a

n AK

Col

or™

with

OR

Pba

ckup

sens

or c

ard

inst

alle

d, th

e A

K11

0 w

ill c

ontr

ol re

lay

2 ba

sed

upon

PPM

mea

sure

men

ts a

s lon

g as

the

DPD

level

is e

stim

ated

to b

e ab

ove

0%.

Whe

n th

ees

timat

ed D

PD le

vel d

rops

to 0

%, r

elay

2 w

ill in

stea

d be

con

trol

led

base

d up

on O

RP

mea

sure

men

ts.

Con

figur

atio

n op

tions

for t

he A

KC

olor

™ se

nsor

are

mad

e ava

ilabl

e on

the

Con

figur

atio

n M

enu

Scre

en.

The

stat

us o

f the

AK

Col

or™

sens

or is

disp

laye

d on

the

AKC

olor

™St

atus

Scr

een,

whi

ch is

eas

ily a

cces

sibl

e fr

om th

e M

ain

Stat

us S

cree

n.

Mai

n S

tatu

s S

cree

n, A

KC

olor

™>Name:Main Pool

System

Programming

Service

Data ( 8:441 )

Communications

Security Setup

Wizards

AKCOLOR

Con

figur

ation

Men

u, C

ontr

olle

r N

ame

pH

> 7.67-OFF 7.50s

PPM 2.65-OFF 2.00s

_____

69.0f SW1OFFSW2OFF

AK

Col

or™

Sta

tus

Scr

een

FREE= 2.65 75/320

MixingDPD

lvl= 90%

CLRv= 3.48 v= 1.98

Name:Main Pool

System

Programming

Service

>Data ( 8:441 )

Communications

Security Setup

Wizards

AKCOLOR

Serial # 123456

Con

figur

atio

n M

enu,

Dat

aD

ata

Dis

play

Scr

een

07/04 pH PPM Temp

12:00 7.53 2.88 76.

10:00 7.45 3.02 75.

08:00 7.42 3.14 75.

06:00 7.45 2.06 76.

04:00 7.59 1.95 77.

02:00 7.60 1.81 76.

00:00 7.64 1.72 75.

22:00 7.68 1.99 75.

Name:Main Pool

System

Programming

Service

Data ( 8:441 )

Communications

Security Setup

Wizards

>AKCOLOR

Serial # 123456

Con

figur

atio

n M

enu,

AK

Col

or™

Ent

er

Bac

k

AK

Col

or™

Con

fig, D

PD

Lev

el 0

%>DPD Level: 0%

TYPE: Free Only

Cycle (min): 4

Manual Control

Ent

er

AK

Col

or™

Con

fig, D

PD

Lev

el 1

00%

>DPD Level: 100%

TYPE: Free Only

Cycle (min): 4

Manual Control

AK

Col

or™

Con

fig, D

PD

Lev

el 0

% DPD Level: 0%

>TYPE: Free Only

Cycle (min): 4

Manual Control

AK

Col

or™

Con

fig, 4

Min

ute

Cyc

le DPD Level: 0%

TYPE: Free Only

>Cycle (min): 4

Manual Control

Ent

er

AK

Col

or™

Con

fig, 5

Min

ute

Cyc

le DPD Level: 0%

TYPE: Free Only

Cycle (min): 5

Manual Control

AK

Col

or™

Con

fig, M

anua

l Con

trol

DPD Level: 0%

TYPE: Free Only

Cycle (min): 4

>Manual Control

Ent

er

AK

Col

or™

Man

ual C

ontr

ol S

cree

nAKCOLOR Ctl: v=1.98

0=BUFF 1=DPD

2=Flow 3=OFF

4=TOT 8=AllOn

Col

orim

etric

PPM

read

ings

are

disp

laye

d in

the

thir

d co

lum

n of

the

Dat

a D

ispl

ay S

cree

n.

Pres

s the

[Ente

r] k

ey to

set

the

estim

ated

rem

ainin

g D

PD re

agen

tle

vel f

rom

0%

to 10

0%, i

n va

ryin

gin

crem

ents

.

The

AKC

olor

™ S

tatu

s Sc

reen

disp

lays

the

sens

or s

tatu

s, c

lear

and

DPD

-mix

ed v

olta

ge le

vels

, and

the

calc

ulat

ed fr

ee c

hlor

ine

PPM

.

The

AK

110

cont

rolle

r is

limite

d to

taki

ng "

free

" ch

lori

ne P

PMm

easu

rem

ents

with

the

AKC

olor

™se

nsor

.

The

AKC

olor

™ M

anua

l Con

trol

Scre

en a

llow

s for

man

ual u

ser c

ontr

olof

the

AKC

olor

™ so

leno

ids

for s

etup

and

troub

lesh

ootin

g pu

rpos

es.

Bac

k

Mai

n S

tatu

s S

cree

n, A

KC

olor

™ E

mpt

ypH

> 7.67-OFF 7.50s

PPM 2.65-OFF err

_____

69.0f SW1OFFSW2OFF

Mai

n S

tatu

s S

cree

n, O

RP

Sho

wn

pH

> 7.67-OFF 7.50s

ORP 490 -OFF 700s

_____

69.0f SW1OFFSW2OFF

The

AK

110

Con

trol

ler a

nd th

e A

KC

olor

™ S

enso

rVi

ewin

g PP

M a

nd O

RP

Mea

sure

men

ts a

nd S

etpo

ints

PPM

mea

sure

men

t and

"er

ror

cond

ition

" sho

wn

on th

e di

spla

yse

cond

row

indic

ates

an

empt

y bo

ttle.

OR

P m

easu

rem

ent a

nd s

etpo

int

show

n on

the d

ispl

ay s

econ

d ro

w a

sno

rmal

. O

RP

now

con

trol

s re

lay

2.

Whe

n an

AK

Col

or™

with

OR

P ba

ckup

sens

or m

odul

e is

inst

alle

d, th

e se

cond

row

of

the

disp

lay

will

alte

rnat

e be

tween

sho

win

g PP

M a

nd O

RP

info

rmat

ion.

Whe

nch

emic

als a

re e

stim

ated

to b

e pr

esen

t in

the

AKC

olor

™, t

he P

PM m

easu

rem

ent a

ndse

tpoi

nt w

ill b

oth

be d

ispl

ayed

.

Whe

n th

e A

K11

0 es

timat

es th

at th

e DPD

and

buf

fer s

olut

ions

hav

e be

en c

onsu

med

,th

e PP

M m

easu

rem

ent i

s sho

wn,

but t

he s

etpo

int d

ispl

ays

an e

rror

con

ditio

n.

Mai

n S

tatu

s S

cree

n, P

PM

Sho

wn

pH

> 7.67-OFF 7.50s

PPM 2.65-OFF 2.00s

_____

69.0f SW1OFFSW2OFF

Mai

n S

tatu

s S

cree

n, O

RP

Sho

wn

pH

> 7.67-OFF 7.50s

ORP 490 -OFF 700s

_____

69.0f SW1OFFSW2OFF

PPM

mea

sure

men

t and

set

poin

tsh

own

on th

e se

cond

dis

play

row

.R

elay

2 is

con

trolle

d by

PPM

.

OR

P m

easu

rem

ent a

nd s

etpo

int

show

n on

the

seco

nd d

ispl

ay ro

w.

Rel

ay 2

is st

ill co

ntro

lled

by P

PM.

AK

110

AK

Col

or S

cree

n N

avig

atio

n, R

ev 3

21 A

ug 2

008

128

pH > 7.67-OFF 7.50s ORP 490 -OFF 700s _____ 69.0f SW1OFFSW2OFF

Main Status Screen

Name:Main Pool System Programming >Service Data ( 8:441 ) Communications Security Setup Wizards Serial # 123456

Configuration Menu, Service

AK110 Service Screen Navigation

Enter

Back

EnterBack

Press the [Enter] key once to turn thethree control relays off for 10 minutes.Press the [Enter] key again to return tonormal control relay operation.

>All Off 10 min(NO) Clear Calibrations Clear Data Clear RLY Timers

Service Screen, Relays Currently On

All Off 10 min(NO) >Clear Calibrations Clear Data Clear RLY Timers

Service Screen, Clear Calibrations

All Off 10 min(NO) Clear Calibrations >Clear Data Clear RLY Timers

Service Screen, Clear Data

All Off 10 min(NO) Clear Calibrations Clear Data >Clear RLY Timers

Service Screen, Clear Relay Timers-Confirm Changes -Clear RLY Timers

NO:7 9:YES

Clear Relay Timers Confirmation Screen

Press the [9] key reset allrelay timers or press the [7]key to cancel.

Enter

9

7or

-Confirm Changes -Clear Data

NO:7 9:YES

Press the [9] key to clear theaccumulated data log orpress the [7] key to cancel.

Enter

9

7or

-Confirm Changes -Reset ALL calibrations? NO:7 9:YES

Clear Calibrations Confirmation Screen

Press the [9] key to clearsensor calibrations or pressthe [7] key to cancel.

Clear Data Confirmation Screen

>All Off 10 min(YES) Clear Calibrations Clear Data Clear RLY Timers

Service Screen, Relays Off for 10 Min

Enter

9

7or

AK110 Service Screen Navigation, Rev 3 21 Aug 2008

10.29

129

How to use this chart:1. The values on the left side of the chart are free-chlorine PPM. The values on the bottom are the approximate equivalent ORP Values. The gray boxes are pH values.

2. Use a DPD test kit to determine the current pH and PPM conditions of the system you wish to control with the Acu-Trol Controller. The pool water should be balanced to your desired pH and PPM levels before you calibrate the system.

3. Locate the PPM chlorine value on the chart that matches the PPM measurement obtained with your DPD test kit. Follow the horizontal line across until it crosses into the gray pH value box that matches the pH value obtained with your test kit.

4. Follow the approximate pH value down to the bottom of the chart to find the approximate equivalent ORP value. This is the approximate ORP value your Controller should read. A variation of +/- 20 ORP units may occur. This range in ORP is due to different mineral contents of water in different areas. The ORP reading will fluctuate slightly depending on the mineral content of your system.

5. When calibrating your ORP to a tested PPM value, use this charts approximate ORP value as a starting point. Then adjust the ORP value until the PPM reading in the Controller matches the PPM measurement obtained from your test kit.

ORP and PPM Chart

PPM v. ORP at pH 7.4-7.6

5

4.5

4

3.5

3

2.5

2

1.5

1

0.5

690 695 700 705 710 715 720 725 730 735 740 745 750 755 760 765 770 775ORP

PPM CL


FLOWALARM

POWERSECURITYMade in USA

110/220 VAC. 5A Disconnect Power Source Before Servicing Unit

AK11087954

6213Back

0Enter

1

2

3,4

5

6

7

8

8

9

10

12

11 (4)

1314

15

16 (2)

17 (2)

18 19

20

21

22

23

AK110 Pool and Spa Chemical Controller Illustrated Parts


DWG. # PART # DESCRIPTION

1 715000150 Enclosure, Lid, w/overlay and hardware

2 724000260 PCB, Control Board, w/display and hardware

3 724000010 PCB, Sensor, pH/orp/temp w/hardware

4 724000020 PCB, Sensor, pH/temp/AKColor, w/hardware

NS 724000280 PCB, Module, Real Time Clock, w/hardware

NS 724000290 PCB, Module, RS232 adapter, w/hardware (optional)

5 724000050 PCB, Module, Relay, w/hardware

6 724000300 PCB, Relay board, w/hardware (3)

7 714000270 Switch, ON/Off, w/jumpers, wires, power cord, strain relief

8 714000210 Cable, Ribbon

9 714000280 Enclosure, Top Half, Complete

10 714000290 Enclosure, Bottom Half, Complete

NS 714000170 Fuse, 1 AMP

NS 714000180 Fuse, 5 AMP

11 754001910 Mounting Feet (4)

12 714000300 Strain Relief (2 small , 3 large)

13 744000270 Kit, pH Sensor, w/BNC Cable

14 744000340 Kit, ORP Sensor, w/BNC Cable

NS 754000320 Parts Bag, Flow Cell, Complete

15 754000360 Filter, Flow Cell

16 754002010 Ball Valve (2)

17 754002000 Fitting, Jaco (2)

18 754000440 Switch, Flow, w/10’ cable

19 754001990 Top, Flow Cell, w/ flow switch and nylon plugs

20 754000340 Clear Jelly Jar, Flow Cell, w/o-ring

21 754000350 O-ring, Clear Jelly Jar, Flow Cell

22 754001980 Kit, Sample Port

AK110 Pool and Spa Chemical Controller Illustrated Parts List

PENTAIR AQUATIC SYSTEMS1620 HAWKINS AVE., SANFORD, NC 27330 • (919) 566-800010951 WEST LOS ANGELES AVE., MOORPARK, CA 93021 • (805) 553-5000 WWW.PENTAIRPOOL.COMAll Pentair trademarks and logos are owned by Pentair or one of its global affiliates. Pentair Aquatic Systems™, Acu-Trol® are trademarks and/or registered trademarks of Pentair Water Pool and Spa, Inc. and/or its affiliated companies in the United States and/ or other countries. Unless expressly noted, names and brands of third parties that may be used in this document are not used to indicate an affiliation or endorsement between the owners of these names and brands and Pentair Water Pool and Spa, Inc. Those names and brands may be the trademarks or registered trademarks of those third parties. Because we are continuously improving our products and services, Pentair reserves the right to change specifications without prior notice. Pentair is an equal opportunity employer.© 2014 Pentair Aquatic Systems. All rights reserved. This document is subject to change without notice.

P/N 700000016 REV. C 3/2014*7000000

Documents

FOR POOL AND SPA MODEL AK110