FOR METALLIC MATERIAL MANUFACTURER

This is to certify that the Quality Management System of:

Scot Forge

8001 Winn Road Spring Grove, IL

U.S.A.

has been assessed by ASS Group and found to comply with the requirements of ISO 9001 :2008 and the provisions of the Pressure Equipment Directive (PED) 97/23/EC 712,

Annex I, Paragraph 4.3.

Scope of supply:

Manufacturer of Open Die and Rolled Ring Forgings in Ferrous and Non Ferrous Material

The manufacturer is authorized to issue certificates of specific and non-specific product control required by the Pressure Equipment Directive and the material specifications applied.

Certificate number:

41343

The certificate is valid until the expiry date shown below, subject to continued certification of the ISO 9001 :2008 system and satisfactory annual PED material manufacturer audits.

·Issue Date: :Expiratio ate:

"'"

11 July 2013 10 July 2016

----------------------------------------------------------------------------Registered office:

ABS Group L TO. ABS House 11 Frying Pan Alley 1 London E1 7HR I United Kingdom

FOR METALLIC MATERIAL MANUFACTURER

This is to certify that the Quality Management System of:

Scot Forge

105 Scot Drive Clinton, WI

U.S.A.

has been assessed by ABS Group and found to comply with the requirements of ISO 9001 :2008 and the provisions of the Pressure Equipment Directive (PED) 97/23/EC 712 ,

Annex I, Paragraph 4.3.

Scope of supply:

Manufacturer of Open Die and Rolled Ring Forgings in Ferrous and Non Ferrous Material

The manufacturer is authorized to issue certificates of specific and non-specific product control required by the Pressure Equipment Directive and the material specifications applied.

Certificate number:

46578

The certificate is valid until the expiry date shown below, subject to continued certification of the ISO 9001 :2008 system and satisfactory annual PED material manufacturer audits.

Issue Date: Expiratio ate:

30 June 2015 29 June 2018

Registered office: ASS Group LTD. ASS House 11 Frying Pan Alley 1 London E1 7HR 1 United Kingdom

FOR METALLIC MATERIAL MANUFACTURER

This is to certify that the Quality Management System of:

Scot Forge

9394 West Belmont Avenue Franklin Park, IL

U.S.A.

has been assessed by ASS Group and found to comply with the requirements of ISO 9001 :2008 and the provisions of the Pressure Equipment Directive (PED) 97/23/EC 712 ,

Annex I, Paragraph 4.3.

Scope of supply:

Manufacturer of Open Die and Rolled Ring Forgings in Ferrous and Non Ferrous Material

The manufacturer is authorized to issue certificates of specific and non-specific product control required by the Pressure Equipment Directive and the material specifications applied.

Certificate number:

46579

The certificate is valid until the expiry date shown below, subject to continued certification of the ISO 9001 :2008 system and satisfactory annual PED material manufacturer audits.

Issue Date: Expiratio ate:

JI'

30 June 2015 29 June 2018

D8:'1id

Registered office: ABS Group LTD. ABS House 11 Frying Pan Alley 1 London E1 7HR 1 United Kingdom