PRODUCT DATA SHEETS | P | capillary tube mats PN20

© BEKA Heiz- und Kühlmatten GmbH, beka-klima.deDeviations from the illustrations are possible. | April 2021

ey a r5 s1

For high pressure application: Capillary tube mats PN20 from BEKA

BEKA capillary tube mats with the pressure level PN20 are used as heating and cooling mats in cooling ceilings and surface heating systems with special pressure loads.

These capillary tube mats PN20 pressure rating open up new areas of use in the high- pressure sector. The BEKA capillary tube mats PN20, with their higher compression resistance, have been developed especially for the use in high-temperature engineering systems, for industrial use and for systems continuously loaded with hot water. Thanks to its higher overall stability, the PN20 capillary tube mat is particularly suited for robust construction site use as well as the installation of underfloor heating.

The wide variety of the PN20 product group ensures that all your requirements can be met by selecting the optimal capillary tube mat.

The BEKA capillary tube mats PN20 are connected to each other and to the water system by thermal welding.

As material for the BEKA mats only Polypropylene Random Copolymer Type 3, DIN 8078 is used. Therefore, all BEKA prod-ucts can be welded to each other easily.

A 100% quality control as well as a 15 year warranty on all BEKA products ensure the constant high quality.

page 1 of 7

PRODUCT DATA SHEETS | P | capillary tube mats PN20

© BEKA Heiz- und Kühlmatten GmbH, beka-klima.deDeviations from the illustrations are possible. | April 2021

P.VS10 | BEKA Capillary tube mat for pressure PN20

Ordering example:BEKA Capillary tube mat Type P.VS10 Length 2500 mm Width 700 mm, without connections:P.VS10.2500.0700.00

MaterialPolypropylene Random-Copolymerisat, Type 3, DIN 8078

Ø Collector pipeØ Capillary tubeCapillary tube distance (A)

20 x 3,4 mm4,5 x 0,8 mm10 mm

Length (L)Width (B)

750 - 6000 mm (in steps of 10 mm)

260 - 1180 mm (in steps of 20 mm)

Missis filledExchange areaWater contents

1438 g/m² (ohne Sammler)1,357 m²/m²0,64 l/m²

Cooling capacity*allow. heating water temp.Operating pressure at 20°C

80 W/m²80°Cmax. 20 bar

Connection for Butt- and Sleeve welding

00, without connections

Operation areaPlaster ceilings, floor heatingSurface activation in Screed

page 2 of 7

*Capacity achieved under defined conditions. Other collector pipe dimensions are available on request (e.g. 20 x 2 PN10).

P.VSK10 | BEKA Capillary tube mat for pressure PN20

Ordering example:BEKA Capillary tube mat Type P.VSK10 Length 2500 mm Width 260 mm, without connections:P.VSK10.2500.0260.00

MaterialPolypropylene Random-Copolymerisat, Type 3, DIN 8078

Ø Collector pipeØ Capillary tubeCapillary tube distance (A)

20 x 3,4 mm4,5 x 0,8 mm10 mm

Length (L)Width (B)

750 - 6000 mm (in steps of 10 mm)

240 - 440 mm (depend of axis

Massis filledExchange areaWater content

479 g/m² (without collector)0,45 m²/m²0,21 l/m²

Cooling capacity*allow. heating water temp.Operating pressure at 20°C

80 W/m²80°Cmax. 20 bar

Connection for Butt- and Sleeve welding

00, without connections

Operation areaLaying in suspended construction of drybuild

*Capacity achieved under defined conditions. Other collector pipe dimensions are available on request (e.g. 20 x 2 PN10).

PN 20

B

L

A20 20

B

L

A20 20

25

B

L

A

33,533,5 33,5

25

PRODUCT DATA SHEETS | P | capillary tube mats PN20

© BEKA Heiz- und Kühlmatten GmbH, beka-klima.deDeviations from the illustrations are possible. | April 2021

P.VS20 | BEKA Capillary tube mat for pressure PN20

Ordering area:BEKA Capillary tube mat Type P.VS20 Length 2500 mm Width 700 mm, without connections:P.VS20.2500.0700.00

MaterialPolypropylene Random-Copolymerisat, Type 3, DIN 8078

Ø Collector pipeØ Capillary tubeCapillary tube distance (A)

20 x 3,4 mm4,5 x 0,8 mm20 mm

Length (L)Width (B)

750 - 6000 mm (in steps of 10 mm)

260 - 1180 mm (in steps of 40 mm)

Massis filledExchange areaWater contents

719 g/m² (without collector)0,68 m²/m²0,32 l/m²

Cooling capacity*allow. heating water temp.Operating pressure at 20°C

80 W/m²80°Cmax. 20 bar

Connection for Butt- and Sleeve welding

00, without connections

Operation areaPlaster ceiling, floor heatingSurface activation in Screed

page 3 of 7

*Capacity achieved under defined conditions. Other collector pipe dimensions are available on request (e.g. 20 x 2 PN10).

P.VS30 | BEKA Capillary tube mat for pressure PN20

Ordering example:BEKA Capillary tube mat Typ P.VS30 Length 3000 mm Width 990 mm, without connections:P.VS30.3000.0990.00

MaterialPolypropylene Random-Copolymerisat, Type 3, DIN 8078

Ø Collector pipeØ Capillary tubeCapillary tube distance (A)

20 x 3,4 mm4,5 x 0,8 mm30 mm

Length (L)Width (B)

750 - 6000 mm (in steps of 10 mm)

450 - 1170 mm (in steps of 60 mm)

Massis filledExchange areaWater content

479 g/m² (without collector)0,45 m²/m²0,21 l/m²

Cooling capacity*allow. heating water temp.Operating pressure at 20°C

80 W/m²80°Cmax. 20 bar

Connection for Butt- and Sleeve welding

00, without connections

Operation areaFloor heating in ScreedActivating area pouring in concrete

*Capacity achieved under defined conditions. Other collector pipe dimensions are available on request (e.g. 20 x 2 PN10).

L

B

2015 15

25

B

L

A30

25

PN 20

PRODUCT DATA SHEETS | P | capillary tube mats PN20

© BEKA Heiz- und Kühlmatten GmbH, beka-klima.deDeviations from the illustrations are possible. | April 2021

P.VG10 | BEKA Capillary tube mat for pressure PN20

Ordering example: BEKA Capillary tube mats Type P.VG10 Length 6000 mm Width 1000 mm, without connections:P.VG10.6000.1000.00

MaterialPolypropylene Random-Copolymerisat, Type 3, DIN 8078

Ø Collector pipeØ Capillary tubeCapillary tube distance (A)

20 x 3,4 mm4,5 x 0,8 mm10 mm

Length (L)Width (B)

750 - 6000 mm (in steps of 10 mm)

410 - 1200 mm (in steps of 10 mm)

Massis filledExchange areaWater contents

1438 g/m² (without collector)1,357 m²/m²0,64 l/m²

Cooling capacity*allow. heating water temp.Operating pressure at 20°C

80 W/m²80°Cmax. 20 bar

Connection for Butt- and Sleeve welding (For Sleeve welding: order L3-both

side Collector pipe lengthening 20 mm)

00, without connections

Operation areaEarth absorberActivating area inside of concrete

page 4 of 7

*Capacity achieved under defined conditions. Other collector pipe dimensions are available on request (e.g. 20 x 2 PN10).

P.VG20 | BEKA Capillary tube mat for pressure PN20

Ordering example:BEKA Capillary tube mat Type P.VG20 Length 5000 mm Width 980 mm, without connections:P.VG20.5000.0980.00

MaterialPolypropylene Random-Copolymerisat, Type 3, DIN 8078

Ø Collector pipeØ Capillary tubeCapillary tube distance (A)

20 x 3,4 mm4,5 x 0,8 mm20 mm

Length (L)Width (B)

750 - 6000 mm (in steps of 10 mm)

240 - 1200 mm (in steps of 20 mm)

Massis filledExchange areaWater content

719 g/m² (without collector)0,678 m²/m²0,32 l/m²

Cooling capacity*allow. heating water temp.Operating pressure at 20°C

80 W/m²80°Cmax. 20 bar

Connection for Butt- and Sleeve welding

00, without connections

Operation areaPlaster ceilingsSurface heating in Plaster o.Screed

*Capacity achieved under defined conditions. Other collector pipe dimensions are available on request (e.g. 20 x 2 PN10).

PN 20

L

B

A2020

L

B

A20 20

PRODUCT DATA SHEETS | P | capillary tube mats PN20

© BEKA Heiz- und Kühlmatten GmbH, beka-klima.deDeviations from the illustrations are possible. | April 2021

P.VG30 | BEKA Capillary tube mat for pressure PN20

Ordering example:BEKA capillary tube mat Type P.VG30 Length 5000 mm Width 940 mm, without connections:P.VG30.5000.0940.00

MaterialPolypropylene Random-Copolymerisat, Type 3, DIN 8078

Ø Collector pipeØ Capillary tubeCapillary tube distance (A)

20 x 3,4 mm4,5 x 0,8 mm30 mm

Length (L)Width (B)

750 - 6000 mm (in steps of 10 mm)

460 - 1210 mm (in steps of 30 mm)

Massis filledExchange areaWater contents

479 g/m² (without collector pipes)0,452 m²/m²0,211 l/m²

Cooling capacity*allow. heating water temp.Operating pressure at 20°C

80 W/m²80°Cmax. 20 bar

Connection for Butt- and Sleeve welding

00, ohne Anschlüsse

Operation areaSurface heating in screed orpouring in concrete

page 5 of 7

*Capacity achieved under defined conditions. Other collector pipe dimensions are available on request (e.g. 20 x 2 PN10).

PN 20

L

A

B

20 20

PRODUCT DATA SHEETS | P | capillary tube mats PN20

© BEKA Heiz- und Kühlmatten GmbH, beka-klima.deDeviations from the illustrations are possible. | April 2021

P.NS15 | BEKA Capillary tube mat for pressure PN20

Ordering example:BEKA capillary tube mat Type P.NS15 Length 4000 mm Width 985 mm, without connections:P.NS15.4000.0985.00

MaterialPolypropylen Random-Copolymerisat, Typ 3, DIN 8078

Ø Collector pipeØ Capillary tubeCapillary tube distance (A)

20 x 3,4 mm3,35 x 0,7 mm15 mm

Length (L)Width (B)

750 - 6000 mm (in steps of 10 mm)

205 - 1195 mm (in steps of 30 mm)

Massis filledExchange areaWater contents

543 g/m² (without collector pipes)0,68 m²/m²0,20 l/m²

Cooling capacity*allow. heating water temp.Operating pressure at 20°C

80 W/m²80°Cmax. 20 bar

Connection for Butt- and Sleeve welding

00, without connections

Operation areaPlasterceilingSurface heating in screed orpouring in concrete

page 6 of 7

*Capacity achieved under defined conditions. Other collector pipe dimensions are available on request (e.g. 20 x 2 PN10).

B

L

A

20 20

25

PN 20

PRODUCT DATA SHEETS | P | capillary tube mats PN20

© BEKA Heiz- und Kühlmatten GmbH, beka-klima.deDeviations from the illustrations are possible. | April 2021

P.FS20 | BEKA Capillary tube mat foil version for floor heating

Ordering example:BEKA capillary tube mat Type P.FS20 Length 5000 mm Width 600 mm, 4 connections:P.FS20.5000.0600.22

MaterialPolypropylen Random-Copolymerisat, Typ 3, DIN 8078

Ø Collector pipeØ Capillary tubeCapillary tube distance (A)

20 x 3,4 mm4,5 x 0,8 mm20 mm

Length (L)Width (B)

1000 - 6000 mm (in Schritten 200 mm)

200 oder 600 mm

Massis filledExchange areaWater contents

719 g/m² (ohne Sammler)0,68 m²/m²0,32 l/m²

Cooling capacity*allow. heating water temp.Operating pressure at 20°C

80 W/m²80°Cmax. 20 bar

Connection *Special design for Sleeve welding

4 Transitions for Press- or Plug-in connectors

Operation area floor heating

page 7 of 7

*Capacity achieved under defined conditions.

Versions with connections on one side, end caps or without connections

are available on request.

PN 20

connection type 22

B

L

A

connection type 20

connection type 02

connection type 00

Sleeve

In the standard version, the BEKA foil mat is equipped with adhesive tape

to attach the mat onto the floor.