77
READING TIP when browsing through this catalogue it is easier using two-up view (viewing the left & right side next to each other)! FOR BEST RESULTS DO NOT PRINT THIS PAGE! This page will interfere with the correct page order when printing recto-verso. Quality Parts & Service The illustrations and photo’s in our catalogues and on our website are protected. It is illegal to copy these in any way or by any means. You are permitted to print the pages for personal use only.

FOR BEST RESULTS DO NOT - Anglo Parts · PDF fileFOR BEST RESULTS DO NOT PRINT THIS PAGE! This page will interfere with the correct page order when printing recto-verso. Quality Parts

Embed Size (px)

Citation preview

Page 1: FOR BEST RESULTS DO NOT - Anglo Parts · PDF fileFOR BEST RESULTS DO NOT PRINT THIS PAGE! This page will interfere with the correct page order when printing recto-verso. Quality Parts

READING TIPwhen browsing through this catalogue it is easier

using two-up view(viewing the left & right side next to each other)!

FOR BEST RESULTS DO NOT

PRINT THIS PAGE!This page will interfere with the

correct page order when printing recto-verso.

Q u a l i t y P a r t s & S e r v i c e

The illustrations and photo’s in our catalogues and on our website are protected. It is illegal to copy these in any way or by any means.

You are permitted to print the pages for personal use only.

Page 2: FOR BEST RESULTS DO NOT - Anglo Parts · PDF fileFOR BEST RESULTS DO NOT PRINT THIS PAGE! This page will interfere with the correct page order when printing recto-verso. Quality Parts

F o u r t h E d i t i o n • 19 0 . 5 1 9 Q u a l i t y P a r t s & S e r v i c e

MGF-TF 1996-2005PARTS & ACCESSORIES CATALOGUE

Page 3: FOR BEST RESULTS DO NOT - Anglo Parts · PDF fileFOR BEST RESULTS DO NOT PRINT THIS PAGE! This page will interfere with the correct page order when printing recto-verso. Quality Parts

fill your customer number in for easy ordering

www.angloparts.complease visit our website for all contact information

Anglo Parts ShopsMAIN BRANCH BELGIUMNETHERLANDS • ITALY • GERMANY

Authorized Anglo Parts DealersFRANCE • NETHERLANDS • SPAINSWEDEN • FINLAND • SWITZERLANDCZECH REPUBLIC • SLOVAKIALUXEMBOURG • POLAND • HUNGARY

All Rights reserved. No part of this publication may be reproduced or absorbed in any catalogue or information system by any means, Mechanical, photographic, electronic or otherwise, without prior express written consent of Anglo-Parts n.v.

F o u r t h E d i t i o n • 19 0 . 5 1 9 • U p d a t e d M a r c h 2 0 1 3 • © A n g l o P a r t s n v 2 0 1 3

MGF-TF 1996-2005PARTS & ACCESSORIES CATALOGUE

Page 4: FOR BEST RESULTS DO NOT - Anglo Parts · PDF fileFOR BEST RESULTS DO NOT PRINT THIS PAGE! This page will interfere with the correct page order when printing recto-verso. Quality Parts

1© Van Geste l B&C 2013 Quality Par ts & Service

MGF 1996-2002 & MGTF 2002-2005

Important information

IMPORTANT POINTS The general policies of our business are printed on the reverse side of our invoices and are on our web site. Updates are printed in the most recent catalogues and price lists and are updated on the web site. When you order goods from us you agree with our policies and accept them. You are always free to ask for an updated publication. The most recent will succeed all previous. Please read below, the most important points.

OUR SALESMEN We are not trained automotive technicians and can not be held responsible for errors we say or write, we are enthusiasts who like to help. For technical information, we recommend you use the books listed in this catalogue.

OUR CATALOGUES/WEBSITE We have made every effort to make sure that the information in our catalogues and on our web site is correct. We can not be held liable or responsible if any mistake or inaccuracy exists in specification, pricing or part number. We have the right to correct any error. The illustrations and photo’s in our catalogues and on our web site are only representations, products supplied may vary from illustrations and photo’s, but will function the same way with similar quality.

OUR PART NUMBERS & PRICES All parts ( or sets of parts ) have our own part number and refer to one item only. THE QUANTITY REQUIRED (“QTY”) stands for the quantity used for particular application. The quantity you order can be different and should be marked when you order. Parts not available new, might be available in second hand condition. These second hand parts are not always listed on the web site or in our price lists. Information will be sent to you on request. Prices shown on the web site and in the price lists are for one item and information only and are subject to change without prior notice. Prices on the web site can be seen with or without VAT depending on your choice. Price lists supplied with the catalogues can exclude or include local VAT, this is indicated on each price list. Part numbers are made from six figures. The first three figures will indicate the nature of the part. For example 161 stands for nuts, 162 for screws, 163 for washers, etc. The condition of the part we sell is indicated on the web site and in the price list. The following codes will appear on the web site in the catalogue parts lists and on the price lists supplied with catalogues, near the number, for the parts which are.. SH - Second Hand, EX - supplied on an EXCHANGE BASIS, and a SURCHARGE will be invoiced. NA - Currently NOT AVAILABLE. LH - Left Hand or RH - Right Hand. Always viewed from the drivers seat. LHD - left Hand Drive, RHD Right Hand Drive, A/R - AS REQUESTED, means the quantity required can vary from application to application. USE - the part number has been replaced by an other part number indicated.

ORDERS Orders are welcome through the WEB SITE, E-MAIL, FAX, LETTER, TELEPHONE or by visiting a Anglo-Parts branch. For orders not made through our Web site, can we please ask you to prepare the following, using our ORDER FORM. - Your CUSTOMER NUMBER, name, address, telephone number work/home, fax number, codice fiscale (for Italian customers only) or VAT number for European companies. - Specify if shipping address is different. - CAR TYPE INFORMATION, make, model, year build etc. - Provide Anglo Parts PART NUMBERS only. - Indicate the quantity desired and parts description. - Indicate method of payment: VISA, MASTER CARD, EURO CARD or advance payment by bank. - Once an order placed, we put this in the computer system and the processing of labels, lists and checking lists will follow. Changing an order already placed, will hold up the whole system and automatically cause delays, we therefore ask for your help by checking your order twice prior to send it to us. This will help us deliver the parts in time. Thank you for your understanding.

PAYMENTS CREDIT CARDS: At this time of writing, we accept the following credit cards: VISA, MASTER CARD, EURO CARD. Please supply credit card number ( mostly 16 figures ), expiring date and name as appears on the card. BANK: When your merchandise is being picked, packed in boxes, weighed and sized, the invoice will be made and we inform you of the total amount to be paid, invoice (Not for Web site) number and our bank references. Please note the invoice number and your customer number with any payment you do.

SHIPMENT NATIONAL: We deliver door to door and goods including the transport costs must be paid at delivery C.O.D., if a credit card was not used. INTERNATIONAL: We ship UPS prepaid, for small parcels. The only cost still to be paid at reception might be your local TAX. For large or heavy parcels we use an economical and fast transport method. ANGLO PARTS packs its boxes very well and the risk of receiving damaged goods is very small, however the following must be noted. Anglo Parts will not be held responsible for goods lost or damaged in transit. For shortage or damage claims not caused by the transporter, a claim must be made within three days of receipt of the order. All packing materials should be retained. Transport of glass in not insurable and will be transported at your own risk.

RECEIVING YOUR GOODS For all shipments, by arrival, please check that no seal or tape is broken and the package is not damaged. In case of any damage or shortage, write this on the carrier’s sheet in accordance with the actual condition and quantity of contents BEFORE you sign the freight bill or receiving note. Keep your copy attached with the invoice and make a claim to the transport company immediately. In any case, save the packing material until everything is settled. Anglo Parts checks goods while picking from stock and again while packing but the final check must be made by the customer himself at arrival. Make sure that the parts received match the ones you ordered and that mechanical parts function correctly. Do not wait with checking the goods until you actually need them and report problems within three days of receiving the goods.

WARRANTY Almost all parts made for the classic car industry are made in small quantities by companies who are willing to do this at an acceptable price. We at Anglo Parts check the goods for approval but we are not able to inspect each individual product. It is the responsibility of the user to make the final inspection of the part PRIOR TO fitting. Especially mechanical parts must be checked to make sure they are in perfect working condition. The warranty period starts from the invoice date, not from the installation date. Our parts carry normal and reasonable warranty but claims will be limited to the value of the component and in no case should cover labour, transport, failure of related component, failure resulting from faulty installation or parts being used for rally or competition. All products for warranty claim must be returned to the shop where you bought it by using the following procedures: the value must be over 8 euro, the goods must be sent back with shipping and taxes prepaid, all parts must be returned clean and well packed, once you or a third person has disassembled the part, our responsibility for it has ended. Anglo Parts will make the final decision of whether the unit was inherently defective or damaged during installation. We shall investigate this offer when we have received the goods back from you in undamaged condition. During the return these goods may not be damaged by poor packing or by transport. The warranty period for reconditioned parts is limited to 6 months and 4 months for rebuilt shock absorbers, most other parts are warranted against defects in material and workmanship by the original equipment manufacturer or by Anglo Parts nv for a period of one year starting with the date on the invoice.

RETURNS If you received an incorrect item, and the mistake is yours, we are willing to restock this item and we will credit the value of the goods less a 15% restocking charge. No returns will be accepted without your invoice copy, after 30 days from the invoice date, for bearings, pistons, piston rings, goods by meter, trim parts ( hoods, soft tops, tonneau covers, seat kits, panels etc.) books or any parts where installation has been attempted. Goods must be returned transport and taxes prepaid. Anglo Parts is not able to refund the taxes paid in the country of arrival, shipping or packing charges and commission we had to pay to the credit card company. You can use the value of this credit note again in a future order of the same value. We do not refund the value of credit notes.

SURCHARGE - CORE DEPOSITS A surcharge will be added on the price for parts offered on an exchange basis. The surcharge price can be seen on the web site in the catalogue parts lists and is listed in our price list near the part number related and will be invoiced pending the return of the old reservicable unit. This surcharge will be refunded in full providing that we receive the unit complete, clean, drained of oil and returned within two months of our invoice date. Please also provide a copy of our invoice. All returns must be sent back with full shipping charge prepaid. If you export the old unit to us, a letter should be sent to us with your name, address, telephone number, date of sending and description of the goods you are returning, including the surcharge value. Please make some copies and stick one on the parcel, one into the packing and keep one for yourself. We will need this information for importing the goods. Upon its arrival we will immediately check the following points: is the packing well done and has there been any damage during the transport, is the old unit similar to the type of unit we have sent to you (correct original), is the unit complete and are the essential parts rebuildable. Please do not send a MGA wiper motor for exchange with a TD wiper motor, do not send a distributor without the advance system. In this latter sample we will refund the surcharge for the distributor less the value (in our opinion) of the advance system.

BACK ORDERS Goods that are not in stock at the time of your order will be kept in back order. We will inform you when these are available again and parts will be reserved for you for a period of fourteen days starting from the day you were informed. If you do not contact us within this period, we will put the part(s) back in our stock to be sold to other customers. By ordering you can also specify “No Back orders” or ask us to cancel all previous back orders. When a part you had on back order becomes obsolete, we will let you know as well. If you decide to take this part in used condition, please ask us and we will do our best to obtain it, if possible.

Belangrijke informatie NL - blz 62 • Informations importantes F - page 63Wichtige Auskünfte/Allgemeine Verkaufs- und Lieferbedingungen D - Seite 64-65 Informazione importante I - Pagina 66 • información importante ES - página 67

• Důležité informace CZ - Stránka 68 • Ważne informacje PL - Strona 69 • Viktig informationen SE - Sida 70

Page 5: FOR BEST RESULTS DO NOT - Anglo Parts · PDF fileFOR BEST RESULTS DO NOT PRINT THIS PAGE! This page will interfere with the correct page order when printing recto-verso. Quality Parts

2© Van Geste l B&C 2013Quality Par ts & Service

MGF 1996-2002 & MGTF 2002-2005

www.angloparts.com

Page 6: FOR BEST RESULTS DO NOT - Anglo Parts · PDF fileFOR BEST RESULTS DO NOT PRINT THIS PAGE! This page will interfere with the correct page order when printing recto-verso. Quality Parts

3© Van Geste l B&C 2013 Quality Par ts & Service

MGF 1996-2002 & MGTF 2002-2005

How to read and use the part number list

ILL n°. Part n°. QTY DESCRIPTIONillustration number Part number Quantity required Part description

Illustration numberExceptions: If a part has no illustration number it is because there are several kinds of the part in question.e.g. Left and right hand door panel.

Part numberExceptions: A part number may be missing if the part is no longer obtainable or in production.

Necessary quantity:ATTENTION: indicated here is the quantity of units necessary and not the quantity of units which are supplied per order/delivery. Our parts are sold per unit.

Part descriptionWith dimensions of screws, bolts, cables, etc. Information about carburetters, electricity etc., details about books giving more information about the part itself: original, reproduction, reconditioned, etc.

Illustratie nummerUitzonderingen: Een onderdeel heeft geen Illustratie nr. omdat er meerdere soorten van het bestaande stuk zijn. vb. Links en rechts deurpaneel

OnderdeelnummerUitzonderingen: Een onderdeel-n u m m e r k a n o n b r e k e n waarneer dit stuk niet meer te verkrijgen of in produktie is.

Nodige HoeveelheidLET OP: Hier wordt de hoeveelheid stuks die nodig zijn vermeld en niet de hoeveelheid stuks die worden geleverd bij bestellingen. Onze onderdelen worden verkocht per stuk.

Onderdeel beschrijvingMet maten van schroeven, bouten, kabels enz. Informatie over carburateurs, elektriciteit enz. Details over boeken die meer informatie geven. Informatie over het onderdeel zelf: origineel, reproduktie, gerestaureerd enz.

Numéro illustrationExceptions: Si une pièce détachée ne comporte pas de numéro d’illustration, c’est que la pièce existe en plusieurs versions.Exemple: Panneau de porte gauche - droite.

Numéro de la pièceExceptions: Si ce numéro n’est pas indiqué, c’est parce que cette pièce n’estplus disponible ou qu’e l le n’est p lus en production.

Quantité nécessaire:ATTENTION: Sous cette rubrique, on mentionne la quantité de pièces qu’il faut et non la quantité de pièces livrées lors de la commande. Nos pièces détachées se vendent à l’unité.

Description de la pièce:Comporte les dimensions des vis, écrous, câbles etc. Des reseignements au sujet de carburateurs, électricité etc., des détails concernant des livres informatifs. Des renseignements au sujet de la pièce même: pièce d’origine, reproduction, pièce révisée etc.

Abbildungsnummer:Ausnahmefall: Wenn ein Einzelteil keine Abbildungs-nummer hat, ist das, weil der Einzelteil in mehreren Fassungen besteht.Beispiel: Linke - rechte Türfläche.

Nummer des Ersatzteils:Ausnahmefall: Mangelt diese Nummer, dann ist dieser Einzelteil nicht mehr verfügbar oder wird er nicht mehr hergestellt.

Benötigte Menge:Achtung! Unter diesem Titel wird die Menge der benötigten Einzelteile angegeben, sondern nicht die Menge der bei Bestellungen gelieferten Einzelteile. Unsere Einzelteile werden stückweise verkauft.

Beschreibung des ErsatzteilsBetrifft die Abmessungen der Schrauben, Mutter, Kabel, usw.; Auskünfte über Vergaser, Elektrizität, usw. Einzelheiten über Info-Bücher, Auskünfte über den Einzelteil selbst: Originaleinzelteil, Reproduction, überholter Einzelteil usw.

Numero illustrazioneEccezioni: Un componente non ha un numero il lustrazione perchè ci sono vari tipi del pezzo esistente.P. es. Pannello porta destro e sinistro.

Numero componenteEccezioni: Può succedere che non c’è un numero componente quando il pezzo non è più disponibile o quando non è più

in produzione.Quantità necessariaAVVERTENZA: La quantità di pezzi necessari è data, e non la quantità di pezzi consegnati dopo ordinazioni. I nostri componenti vengono venduti

al pezzo.Descrizioni componentiCon misure di vite, bulloni, cavi ecc. Informazione su carburatori, elettricità ecc. dettagli su libri che danno ulteriore informazione. Informazione sul componente stesso: originale, riproduzione, revisionato ecc.

GB

D

F

NL

I

Page 7: FOR BEST RESULTS DO NOT - Anglo Parts · PDF fileFOR BEST RESULTS DO NOT PRINT THIS PAGE! This page will interfere with the correct page order when printing recto-verso. Quality Parts

4© Van Geste l B&C 2013Quality Par ts & Service

MGF 1996-2002 & MGTF 2002-2005

Notes

Page 8: FOR BEST RESULTS DO NOT - Anglo Parts · PDF fileFOR BEST RESULTS DO NOT PRINT THIS PAGE! This page will interfere with the correct page order when printing recto-verso. Quality Parts

5© Van Geste l B&C 2013 Quality Par ts & Service

MGF 1996-2002 & MGTF 2002-2005

Orderform

ANGLO PARTS FAX ORDERFORM

Quantity Part n° Page n° Illustr. n° Description

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

Client n° : Date :

Name : Shipping address if different :

Address :

Country : Country :

Telephone :

Fax :

To be shipped Will be collected Backorders, parts not in stock or available at this moment/ required or not

Q u a l i t y P a r t s & S e r v i c e

Payment : Visa Euro-card - Master card - Access

Card n°. :

Exp. date : badge code : Signature :

Model : Year :Chassis n° :Engine n° :

Fax numbersBELGIUM Fax +32 15 42 34 45 • NETHERLANDS, BOVEN-LEEUWEN Fax +31 318-551395ITALY Fax +39 0422 321 470 • GERMANY Fax +49 6441 781336 • FRANCE Fax +33 328 26 83 73 NETHERLANDS, GRUBBENVORST Fax +31 318-551395 • SPAIN Fax +34 93 225 27 91LUXEMBOURG Fax +352 518151-820 • HUNGARY Fax +36 1 254 08 08CZECH & SLOVAK REPUBLIC Fax: +42(0) 383 382 161

Page 9: FOR BEST RESULTS DO NOT - Anglo Parts · PDF fileFOR BEST RESULTS DO NOT PRINT THIS PAGE! This page will interfere with the correct page order when printing recto-verso. Quality Parts

6© Van Geste l B&C 2013Quality Par ts & Service

MGF 1996-2002 & MGTF 2002-2005

Easy Ordering

Page 10: FOR BEST RESULTS DO NOT - Anglo Parts · PDF fileFOR BEST RESULTS DO NOT PRINT THIS PAGE! This page will interfere with the correct page order when printing recto-verso. Quality Parts

7© Van Geste l B&C 2013 Quality Par ts & Service

MGF 1996-2002 & MGTF 2002-2005

Engine and vehicle identification codes

The 9th letter represents the transmission/steering eg: B = 1600 manual, 5 speed, RHD M = 1600 manual, 5 speed, LHD C = 1800 manual, 5 speed, RHD N = 1800 manual, 5 speed, LHD J = Steptronic, RHD X = Steptronic, LHD

The 10th letter represents the model change eg: W = 1998 model year 1 = 2001 model year X = 1999 model year 2 = 2002 model year Y = 2000 model year 3 = 2003 model year etc ...

E.E.C. approval number

G.V.W. maximum (The maximum load in kilograms that can be carried by the front axle, rear axle and the vehicle. Limited by the structural strength and the mechanical specification.)

Paint code. See key to body exterior and main trim colour combinations for code details eg: CMU = Solar Red

Vehicle identification number

Front axle maximum permitted road weight

Rear axle maximum permitted road weight

Trim codeSee main trim colour combinations section for code details eg: PUU = Black

Vehicle identification plateThe vehicle identification plate (VIN) is located on the right hand side of the underbonnet area (opposite side to the battery).

This plate contains a series of numbers and codes that define each individual vehicle. See below:

MG ROVER GROUP LIMITEDXXX XXXX XXXX

XX X X X X X X X XXXXXX XXXX

XXXX XXXX

PAINT XXX TRIM XXX

1-2-

kgkgkgkg

MGF 1996-2002 MGTF 2002-2005

Engine identification codes The engine number comprises a series of letters and numbers presenting in code the cubic capacity, engine series and the ancillaries fitted. The engine serial number is a unique number. Always quote these prefixes with the engine serial number.

3rd prefix code

Vehicle specifications

J31 1800Mpi standard engine, manual transmission

J32 1800Mpi standard engine, air conditioning, manual transmission

J80 1800Mpi VVC standard engine, manual transmission

J90 1800Mpi standard engine, air conditioning, manual transmission

L70 1800Mpi standard engine, automatic transmission

L71 1800Mpi standard engine, air conditioning, automatic transmission

M13 1800Mpi standard engine, air conditioning, automatic transmission

M14 1800Mpi standard engine, automatic transmission

P23 1600Mpi standard engine, manual transmission

P24 1600Mpi standard engine, air conditioning, manual transmission

P25 1800Mpi VVC 160PS standard engine, manual transmission

P26 1800Mpi VVC 160PS standard engine, air conditioning, manual transmission

P27 1800Mpi 135PS standard engine, manual transmission

P28 1800Mpi 135PS standard engine, air conditioning, manual transmission

P29 1800Mpi 120PS standard engine, automatic transmission

P30 1800Mpi 120PS standard engine, air conditioning, automatic transmission

R30 1800Mpi VVC 160PS Mexico low compression, air conditioning, manual transmission

1st prefix group 2nd prefix group 3rd prefix group 4th prefix group

18 K 4 F J32 100101 1st prefix 1st prefix 2nd prefix 2nd prefix 3rd Prefix Engine serial number letter number letter code number

1st prefix n° Cubic capacity 16 1600cc 18 1800cc 1st prefix letter Engine series K K series 2nd prefix n° Number of valves 4 16 valves (4 per. cylinder.) 2nd prefix letter Injection & emissionF Multi point injection with catalystK Multi point injection with catalyst VVC

SAR RD W B G B 2 D 600100The 1st, 2nd and 3rd letters represent the world make identifier.

The 4th and 5th letters represent the marque and model, in this case RO = MGF

The 6th letter represents the trim level (model variant) of the vehicle eg: M = TL3 (entry) W = TL5 (mid) L = TL7.1 (VVC 160)

The 7th letter represents the Body eg: B = convertible

SAR RD W B G B 2 D 600100

SAR RD W B G B 2 D 600100

SAR RD W B G B 2 D 600100

SAR RD W B G B 2 D 600100

SAR RD W B G B 2 D 600100

Vehicle identification codesThe vehicle identification number (VIN) comprises a series of letters and numbers representing, in code, the world make identifier, marque, model, class, body,engine, transmission, steering, model change, assembly plant and serial number applicable to each individual vehicle (effective from November 1998). This number should be quoted in full when communicating with your dealer. The VIN number can be found on the VIN plate, stamped into the bodywork of the underbonnet area to the rear of the VIN plate and on a plate visible through the bottom left hand corner of the windscreen.

Page 11: FOR BEST RESULTS DO NOT - Anglo Parts · PDF fileFOR BEST RESULTS DO NOT PRINT THIS PAGE! This page will interfere with the correct page order when printing recto-verso. Quality Parts

8© Van Geste l B&C 2013Quality Par ts & Service

MGF 1996-2002 & MGTF 2002-2005

IndexAABS system 29Accelerator controls 23Accessories 49, 54 > 57Adaptor, oil filter 12Airbag 26, 43Air cleaner 23Airconditioning 21Air filters 10, 23, 47Air intake 40, 52Allgemeine Verkauf- und lieferbedingungen D 65Alarm unit 33Alloy wheels 31, 54Alternator & fixing 32Antenna & antenna cable 34Anti-freeze 19, 59Anti-rust products 59Anti-roll bar 26, 27Arm rests, leather 49Ashtray 44Assembling lube 11AUTOGLYM products 60

BBadges 38, 40, 55Battery & cables 32Battery charger - conditioner 57 Battery starter cables 57Bearings sets, engine 11Bearings kits, con rod 11Bearings kits, suspension 25, 27Belangerijke informatie NL 62 Belts 10, 14, 32Blanket, Scottish plaid 56Blanking plugs 44Body care products 60Body fittings 40Body parts & mountings 37 > 42Body panels 37 > 42Body shell 37Body styling, exterior 52Bolting, bumpers 41Bolting, chassis 28, 37Bolting, suspension 25, 27Bonnet catch assembly 38Bonnet & fittings 38Books 61Boot trim 46Boot lid & fittings 38Boot racks 48Brake bleeding 29, 58Brake calipers 29 Brake cleaner 59Brake discs 10, 25, 27Brake fluids 17, 29, 58Brake hoses 30Brake parts & fittings 10, 25, 27, 29Brake pads 10, 29Brake pipes 30Brake pump, master 29Brake servo 29Breather hose 22Bulb kits 35Bulbs 35Bumpers 41Bump stop kit 54Bushes, anti-roll bar 26, 27Bushes, suspension 25, 27

CCables 15, 20, 23, 32, 34 Cables, accelerator 23Cables, battery 32Cables, handbrake 30Cables, heating 20Cables, instruments 34Caliper, brakes 29Can, fuel, non-explosive 57Canister carcoal 22Camshaft 13, 47Camshaft timing 14Cap, MG 55Cap, petrol 22Cap, tyre valve 31, 54Car care products 58 > 60Carcoal canister 22Car covers 53Car duster 60

C continuedCar wash products 60Carpets, sets & fittings 45, 46, 51Castrol SRF brake fluid 29, 58Centre arm rest 44, 51 Centre cap, wheels 31Chamois 60Chassis & mountings 28Chrome accessories 52Chrome polish 60Cigar lighter 34Clamps, exhaust 18Cleaning products 58 > 60Clutch components 12, 15, 17Clutch pipes 17Clutch plate 12Clutch, master cylinder 17Coil, ignition 24Compressor pump (airco) 21Condensor (airco) 21Connolly hide care 60Con rod bearing set 11Control box 33Conzoll, dashboard 44Cooling 19, 20, 58, 59Copper grease 29Crankshaft 11Cubby box lid 44, 51Cup holder 57Cylinder head gasket set 13Cylinder head parts 13

DDashboard & fittings 34, 43, 44Dash kit 49Decals, stickers 55Differential 16Discs, brake 10, 25, 27Door anti-scuff plates 49Doors 39Door hinges 39Door locks 39Door handles 39, 49Door glass 39Door mirrors 41Door panels 45Door pockets 49Door pods, leather 45, 50Door seals 39Door window fittings 39Dot 5 brake fluids 29, 58Drier (airco) 21Drivers accessories 56Driveshaft 27Driving gloves 56Důležité informace CZ 68

EEasy bleed kit 29, 58ECU fuel injection 24Electrics 24, 33Electric clock 34Emergency triangle 57Engine assembly 11Engine cover 46Engine gasket sets 11, 13Engine improvements 47Engine mountings 28Engine numbers info. 7 Evaporator (airco) 21 Exhange seats 50 Exhaust manifolds 14 Exhaust system & fittings 18, 47Extinguisher, fire 57Expansion tank, radiator 19 FFan 19Fascia & fittings 43Fasteners, trim & carpets 44 > 46, 50, 51Fertan, anti-rust rust killer 59Filler cap 22Filter, air 10, 23, 47Filter, fuel 22 Filter, oil 10, 12Fire extinguisher 57First aid kit 57Fittings, body 28, 37 > 42

F continuedFittings, exhaust 14, 18Fittings, bumper 41Fittings, electric 33Fittings, windscreen 40Finishers 40Flag, Union Jack 55Flanges, wheels 25, 27Flasher lamps/lights 35Flywheel 12Fog lamps/lights 35Foot mats 51, 52Force speed oil can 58Front anti-roll bar 26Front bumper 41Front lamps/lights 35Front springs 25Front subframe 28Front suspension 25Front wings 37Fuel can, non-explosive 57Fuel filler cap 22Fuel filler neck 22Fuel filter 22Fuel hoses 22, 23Fuel pump 22Fuel rail & injectors 23Fuel system 22Fuel tank 22Fuse boxes & fuses 33

GGaiters, gear levers & handbrake 44, 49Gaiters, steering rack 26Gaskets 11, 13, 14Gaskets, cylinder head 13Gaskets, engine 11, 13Gaskets, manifolds 14, 18Gauges 34Gauge, tyres 54Gearbox 15, 16Gear lever knobs 15, 49Gear levers & parts 15Glass, door window 39Glass, windscreen 40Glovebox 43Gloves 56Glue products 59Grease, Castrol 58Grease cleaner 58Grease gun/pump 58Grease products 58 Grommets 23, 34, 40Grill 41Grill kits, styling 52

HHandbrake gaiters 30, 49Handbrake system 30Handshoe, car wash 60Hard top & parts 42, 48 Hard top storage 53 Harness, electrics 24, 33 Head gasket set 11, 13Headlamps 35Headlining 42Heater installation 20Heat shields 18Heater vents 43Heel mats 51, 52High temperature grease 29Hose, breather 22Hoses, fuel 22, 23Hoses, heater installation 19, 20Hoses, radiator 19Hose, vacuum, servo 29Hoods, hard-top 42, 48Hoods, soft-top 42Hood roll cover 53How to read and use the partn° list 3H.T. lead set 10, 24 Hydra blade 60

IIdentification numbers 7Ignition coil 24Ignition lead set 24Ignition, sensors 24

Page 12: FOR BEST RESULTS DO NOT - Anglo Parts · PDF fileFOR BEST RESULTS DO NOT PRINT THIS PAGE! This page will interfere with the correct page order when printing recto-verso. Quality Parts

9© Van Geste l B&C 2013 Quality Par ts & Service

MGF 1996-2002 & MGTF 2002-2005

IndexI continuedIgnition system 24 Important information GB 1 Indicator lamps/lights 35Indoor car cover 53Información importante E 67Information importantes F 63Informazione importante I 66Injectors, fuel 23Inlet manifold 14Instruments 34Interior mirror 41Interior trim 43 > 45, 49 > 51Internal panels & fittings 43 > 45, 49 > 51Insulation 45

JJack, car 31Jerry can, fuel, non-explosive 57

KKent cams 47Key fobs 55Knobs, dashboard 20, 34Knobs, gear lever 15, 49

LLambswool scarves 56Lamps 35Lead sets 10, 24 Leather care 60Leather seats 46, 50Light, map reading 34Lights 35Location of serial numbers 7Locks 38, 39, 40Luggagae racks 48

MMain bearing set 11 Manifold: inlet, exhaust, gaskets 14 Master brake pump 29Matrix, heater 20Mats 51, 52Metal polish 60 MG accessories 55MG badges 55MG cap 56MG flag 55MG key fobs 55MG on pin 55MG patches 55MG stickers 55MGF workshop manual 11Mirror covers, chrome 41, 52Mirrors 41Moltex car covers 53Most important parts 10 Mountings, engine 28Mud flaps 52

OOil 10Oil can 58Oil feed 12Oil filters 10, 12Oil filter adaptor 12Oil products 10, 58Oil pump 12 Oil spray 58Oil sump 12Oil seals 11, 15, 16Oil thermostat 13Orderform 5, 71 Outdoor car cover 53Overflow parts, radiator 19Overmats, foot well 51 PPanels, body 37 > 42Panels, interior trim 43 > 45Part number explanation 3Patches 55Petrol cap 22 Petrol pumps 22Petrol system 22Petrol tank 22Picnic blanket 56

P continued Pins, decoration 55Pipes, airconditioning 21Pipes, fuel 22, 23Pipes, water 19Piston & liner set 11Pistons & piston rings 11Plates, i.d. 7Polishing products 60Polyurethane bushes 25, 27Power steering 26Power tuning 47Practical accessories 57Production dates 7 Protection products 58 > 60Pulleys 14, 47Pump, fuel 22Pump, oil 12Pump, tyre 57

RRadiator & fittings 19Radio 34Rain X 59Rear anti-roll bar 26Rear body panels 37, 38, 41Rear bumpers 41Rear lamps/lights 35Rear springs 27Rear subframe 28Rear suspension 27Rear view mirrors 41Rear wings 37 Rebushing suspension 25, 27 Reflector triangle 57Relays 33Release bearing 12Repair kits 17, 29Resonator 22Retrim materials 43 > 45, 49 > 51Rev counter 34Ring sets, piston 11Rocker cover & parts 13 Rocker cover gaskets 13Roll-over bar 48Rubber, glazing 39, 40, 42Rubber grease 17, 29, 58Rubber mats 51, 52Rust removers & proofing 59

SSafety belts 46Safety parts 46, 57Scarves, lambswool 56Scottish plaid 56Scottish scarves 56Seals, body 38, 39, 40, 42Seals, boot & bonnet 38Seals, hard top 42Seals, oil 11, 15, 16Seals, windscreen 40Seat belts 46Seat covers 46, 50Seats 46, 50Sender unit 22Sensors 24Serial numbers 7Servo, brake 29Shaft, drive 27Shock absorbers 25, 27, 47Side lamps/lights 35Side mirrors 41Silicone brake fluids 29, 58Silicone spray 58Sill plates , door 49Slave cylinder, clutch 17Soft top and parts 42Solenoid, starter 32Spark plugs 10, 24SPAX shock absorbers 25, 27, 47Speaker, music system 34Speedometer & cables 34Spin-on oil filter 10, 12Sports exhaust 47Spring, front 25Spring, rear 27Stainless steel exhaust system 18, 47Starter cables 57

S continued Starter motor 32Steering column 26Steering rack 26Steering system 26Steering wheel 26Stickers 55Stop lamp 35Storage equipment 53Studs & bolts for engine 11Studs for cylinderhead 13Subframe, front 28Subframe, rear 28Sump 12Sun visors 45Supertex car covers 53Suspension bushes 25, 27Suspension improvements 47Suspension, front 25Suspension, rear 27Switches 20, 34

T T-bar 51Tachometer 34Telescopic shock absorber 25, 27, 47Thermostat 13Threshhold plates 49Throttle body 23 Timing belt 10, 14Toolbag 31Transmission 15, 16Triangle, reflector 57Trim accessories 49Trim panels & parts 44 > 46, 49 > 51 Trim screws and clips 43 > 46Tunnel conzoll 44Tyre dressing, AutoGlym 60Tyre pressure gauge 54Tyre pump 57Tyre valve caps 31, 54

U Umbrella, MG 55Underfelt 45Union Jack accessories 55Union Jack badges 55Union Jack flag 55Union Jack key fobs 55Union Jack on pin 55Union Jack patches 55Union Jack stickers 55

VValve caps 31, 54Valves & guides 13Viktig Informationen 70Vinyl & rubber care products 60Vizibleed 29, 58

WWasher kit, windscreen 36Washer pump 36Waterproofing for electrics 59Water pipes 19Water pump 11Water wetter, super coolant 58 Waxoyl products 59Ważne informacje 69Weather equipment 53Wet protect waterproofing 58, 59Wheel bearing kits 25, 27Wheel cleaner 60Wheels 31, 54Wheel trim & accessories 31, 54, 58Wichtige Auskünfte D 64Window fittings, door 39Windscreen & fittings 40Windscreen glass cleaner 60Windscreen washer system 36Windscreen wiper system 36Windshield/stop 53Wings, front 37Wings, rear 37Wiper motor 36Wiring loom/harness 24, 33Workshop manual MGF 11,61Wringer 60

Page 13: FOR BEST RESULTS DO NOT - Anglo Parts · PDF fileFOR BEST RESULTS DO NOT PRINT THIS PAGE! This page will interfere with the correct page order when printing recto-verso. Quality Parts

10© Van Geste l B&C 2013Quality Par ts & Service

MGF 1996-2002 & MGTF 2002-2005

Most important parts

ILL N° PART N° QTY DESCRIPTION APPLICATION1 011.798 1 Oil filter 2 300.122 5 1 Liter Castrol oil RS 10W603 101.870 1 Air filter up to 2000

108.780 1 Air filter 2000-on4 012.718 4 Spark plug5 081.621 1 H.T. lead kit, standard NOT VVC6 013.559 1 Timing belt

013.566 1 Timing belt VVC front013.568 1 Timing belt VVC rear

ILL N° PART N° QTY DESCRIPTION APPLICATION7 053.214 1 Brake pad set, front MGF

053.624 1 Brake pad set, front MGTF & Trophy053.215 1 Brake pad set, rear

8 050.197 1 Pair discs, front brakes MGF050.587 1 Pair discs, front brakes MGTF & Trophy050.201 1 Pair disc, rear brakes

9 087.073 1 Wiper blade, drivers side087.074 1 Wiper blade, passengers side

5

4

1

7

2

6

8

3

9

Page 14: FOR BEST RESULTS DO NOT - Anglo Parts · PDF fileFOR BEST RESULTS DO NOT PRINT THIS PAGE! This page will interfere with the correct page order when printing recto-verso. Quality Parts

11© Van Geste l B&C 2013 Quality Par ts & Service

MGF 1996-2002 & MGTF 2002-2005

Engine assembly, pistons and crankshaft

ILL N° PART N° QTY DESCRIPTION APPLICTION1 010.427 1 Engine assembly

010.428 1 Engine assembly VVC2 165.143 1 Bolt, ladder to block, front 3 165.144 9 Screw, ladder to block 4 172.707 2 Dowel, ladder to block 5 172.708 2 Dowel, block to head 6 172.709 2 Dowel, block to gearbox 7 011.785 1 Rail, oil feed 8 167.245 2 Stud, rail to ladder 9 161.586 2 Nut, rail to ladder

10 172.710 2 Core plug, ladder 11 014.540 4 Piston & rod, grade ‘A’

014.541 4 Piston & rod, grade ‘B’ 014.542 4 Piston & rod, grade ‘A’ VVC014.543 4 Piston & rod, grade ‘B’ VVC

12 014.546 1 Piston ring set ( 4 pistons ) 13 014.544 4 One liner, grade ‘A’

014.545 4 One liner, brage ‘B’ 14 165.145 8 Bolt, con rod 15 015.265 1 Con rod bearing set, STD

015.266 1 Con rod bearing set, .25mm 015.627 1 Con rod bearing set, .50mm

ILL N° PART N° QTY DESCRIPTION APPLICATION16 013.553 1 Crankshaft assembly 17 011.786 1 Dowel, flywheel 18 015.260 1 Main bearing set, STD

015.261 1 Main bearing set, .25mm 015.262 1 Main bearing set, .50mm

19 015.258 2 Thrust washer 20 016.525 1 Oil seal, rear 21 016.548 1 Head gasket set

016.660 1 Head gasket set VVC016.549 1 Bottom set 016.539 1 Kit, liquid gasket replacement

22 330.060 1 40 gr. cam/assy lube 23 061.274 1 Waterpump assembly 24 016.540 1 Gasket, waterpump 25 165.173 1 Bolt, pillar 26 165.172 4 Screw, waterpump 27 172.714 2 Dowel, pump to block 28 190.548 1 MGF Workshop Manual, English version

190.549 1 MGF Workshop Manual, Dutch version190.550 1 MGF Workshop Manual, French version190.551 1 MGF Workshop Manual, German version190.855 1 MGTF Workshop Manual, English version

28

Page 15: FOR BEST RESULTS DO NOT - Anglo Parts · PDF fileFOR BEST RESULTS DO NOT PRINT THIS PAGE! This page will interfere with the correct page order when printing recto-verso. Quality Parts

12© Van Geste l B&C 2013Quality Par ts & Service

MGF 1996-2002 & MGTF 2002-2005

Oil pump, sump and clutch

ILL N° PART N° QTY DESCRIPTION1 011.804 1 Sump, oil 2 165.171 2 Bolt, sump 3 165.144 12 Screw, sump 4 165.170 1 Drain plug

017.204 1 Magnetic oil drain plug5 163.213 1 Washer, drain plug 6 011.803 1 Pipe, oil suction 7 016.538 1 ‘O’ Ring 8 165.165 2 Screw 9 011.798 1 Oil filter

10 011.797 1 Connection stud 11 011.796 1 Adaptor, oil filter 12 016.536 1 Gasket, adaptor 13 165.165 4 Screw, adaptor to block 14 172.713 1 Plug, taper 15 013.569 1 Oil pump assembly, less gasket 16 016.535 1 Gasket, oil pump to block 17 016.534 1 Oil seal, crankshaft, front 18 165.163 8 Bolt, oil pump to block 19 165.164 1 Screw, oil pump to block 20 013.570 1 Repair kit, oil pump 21 011.802 1 Dipstick, oil 22 012.700 1 OIl filler cap 23 016.529 1 Seal 24 011.799 1 Filler, upper part 25 011.801 1 Filler, lower part 26 165.169 1 Screw, lower to block

ILL N° PART N° QTY DESCRIPTION27 016.537 1 Gasket, filler lower 28 165.168 2 Screw, filler to ladder 29 011.800 1 Bracket 30 165.166 1 Screw, bracket to tube 31 165.167 1 Screw, bracket to inlet manifold

165.148 1 Screw, bracket to inlet manifold VVC32 163.214 1 Spacer, bracket to manifold 33 165.182 2 Bolt, M12 x 90

165.186 1 Bolt, M12 x 80 165.181 2 Bolt, M12 x 53 165.180 2 Bolt, M12 x 50 165.183 1 Bolt, M12 x 65 165.185 1 Screw, M10 x 35 165.184 1 Screw, M10 x 30

34 161.590 5 Nut, M12 flanged 35 137.086 1 Plate, gearbox closing, front 36 137.087 1 Plate, gearbox closing, rear 37 021.112 1 Release bearing, clutch 38 021.111 1 Clutch cover 39 021.110 1 Clutch plate 40 165.178 6 Screw, cover to flywheel 41 011.810 1 Flywheel assembly, improved type for MPI cars VVC42 011.811 1 Gear, starter ring 43 165.187 6 Bolt, flywheel to crankshaft 44 172.718 3 Dowel, flywheel to clutch cover 45 116.309 1 Insert - press in

Page 16: FOR BEST RESULTS DO NOT - Anglo Parts · PDF fileFOR BEST RESULTS DO NOT PRINT THIS PAGE! This page will interfere with the correct page order when printing recto-verso. Quality Parts

13© Van Geste l B&C 2013 Quality Par ts & Service

MGF 1996-2002 & MGTF 2002-2005

Cylinderhead and fittings

ILL N° PART N° QTY DESCRIPTION1 012.704 1 Cylinderhead assembly, valves included2 016.527 1 Gasket, cylinder head 3 016.548 1 Gasket set, cylinder head 4 165.146 10 Bolt, cylinder head 5 165.149 26 Bolt, carrier to head 6 172.712 2 Dowel ring, carrier to head 7 167.246 3 Stud, inlet manifold 8 167.247 5 Stud, exhaust manifold 9 012.706 16 Valve guide, standard

012.707 16 Valve guide, grooved & steppedsalvage 10 012.717 16 Tappet, hydraulic 11 012.716 32 Collet, valve locking 12 012.715 16 Spring cap, upper 13 012.714 1 Valve spring set

012.713 16 Valve spring 14 012.712 16 Seal, valve stem 15 012.711 8 Valve, exhaust

012.710 8 Valve, inlet 16 012.703 1 Blanking plate 17 165.148 2 Screw for blanking plate 18 016.528 1 Gasket, cover 19 012.701 1 Cover, camshaft

ILL N° PART N° QTY DESCRIPTION20 165.147 15 Bolt, cover to head 21 012.702 1 Cover plate, spark plugs 22 012.700 1 Oil filler cap 23 016.529 1 Seal, oil filler cap 24 013.554 1 Camshaft, inlet 25 013.555 1 Spindle driven rotor arm 26 172.711 2 Pin, roll 27 013.556 1 Camshaft, exhaust 28 016.526 4 Oil seal, camshaft 29 061.275 1 Thermostat & Housing assembly 30 061.276 1 Thermostat, 88°C 31 016.541 1 Seal, thermostat 32 016.542 2 ‘O’ Ring 33 165.162 3 Screw, housing 34 165.174 1 Bolt, housing to block 35 061.277 1 Elbow, water outlet 36 016.543 1 Gasket, elbow 37 165.165 2 Screw, elbow to head 38 011.809 1 Hose, cover to throttle body 39 172.717 2 Clip for hose 40 011.808 1 Breather hose, cover to inlet manifold 41 172.716 2 Clip, breather hose

Page 17: FOR BEST RESULTS DO NOT - Anglo Parts · PDF fileFOR BEST RESULTS DO NOT PRINT THIS PAGE! This page will interfere with the correct page order when printing recto-verso. Quality Parts

14© Van Geste l B&C 2013Quality Par ts & Service

MGF 1996-2002 & MGTF 2002-2005

Camshaft timing and manifolds

ILL N° PART N° QTY DESCRIPTION1 013.559 1 Timing belt, 23mm

013.971 1 Timing belt, 26mm 013.566 1 Timing belt VVC

2 013.560 1 Tensioner, timing belt, 23mm017.498 1 Tensioner, timing belt, 26mm

3 061.182 1 Screw, tensioner 4 165.152 1 Capscrew 5 013.561 1 Spring and sleeve 6 013.562 1 Bolt, pedastal 7 011.787 1 Pulley, crankshaft 8 011.791 1 Pulley, crankshaft - VVC 9 165.150 1 Bolt, pulley

10 163.210 1 Washer 11 011.790 1 Cover, lower half-front 12 165.158 2 Screw 13 165.156 1 Screw, to rear cover 14 016.533 1 Seal, cover to block 15 016.532 1 Seal, covers 16 016.530 1 Seal, mounting bracket 17 016.531 1 Seal, water pump 18 011.789 1 Cover, upper-front 19 011.793 1 Cover, upper-front - VVC 20 165.155 1 Bolt, long

ILL N° PART N° QTY DESCRIPTION21 165.157 1 Bolt, short 22 165.156 4 Screw 23 013.557 1 Gear, crankshaft

013.563 1 Gear, crankshaft - VVC 24 013.558 2 Gear, camshaft 25 013.565 1 Gear, exhaust-front - VVC 26 013.564 1 Gear, inlet-front - VVC 27 165.151 2 Screw, gear to camshaft

165.159 2 Screw, gear to camshaft - VVC 28 163.211 2 Washer

163.212 2 Washer - VVC 29 011.788 1 Cover, upper-rear 30 011.792 1 Cover , upper-rear - VVC 31 165.153 3 Screw, rear cover 32 165.154 1 Screw, rear cover to water pump 33 013.568 1 Timing belt, rear - VVC 34 013.567 2 Pulley, rear - VVC 35 165.159 2 Screw for pulley - VVC 36 163.212 2 Washer, pulley - VVC 37 011.795 1 Cover, outer 38 165.162 4 Screw, outer cover 39 011.794 1 Cover, rear 40 165.153 1 Screw, M6

ILL N° PART N° QTY DESCRIPTION41 165.161 2 Screw, M5 42 011.805 1 Inlet manifold 43 016.544 1 Gasket, inlet manifold 44 161.587 3 Nut for stud 45 165.175 4 Bolt, manifold to head 46 011.806 1 Manifold, upper - VVC 47 011.807 1 Manifold, lower - VVC 48 016.545 1 Gasket upper/lower - VVC 49 016.546 1 Gasket, lower to head 50 165.177 7 Screw, lower to head 51 161.588 2 Nut, lower to head 52 165.176 5 Bolt, upper to lower 53 172.715 1 Insert 54 137.085 1 Strut 55 165.179 1 Bolt, strut to block 56 165.178 1 Screw, strut to manifold 57 110.270 1 Exhaust manifold, to 521459

110.755 1 Exhaust manifold 1.6 & 1.8, 521460-on

58 016.547 1 Gasket, manifold to head 59 161.589 5 Nut, manifold to head 60 167.248 4 Stud, manifold to exhaust

Page 18: FOR BEST RESULTS DO NOT - Anglo Parts · PDF fileFOR BEST RESULTS DO NOT PRINT THIS PAGE! This page will interfere with the correct page order when printing recto-verso. Quality Parts

15© Van Geste l B&C 2013 Quality Par ts & Service

MGF 1996-2002 & MGTF 2002-2005

Transmission ( part one ) and gear lever parts

ILL N° PART N° QTY DESCRIPTION APPLICATION1 020.159 1 Transmission, (C6BP)

020.158 1 Transmission, (C4BP) VVC2 027.295 1 Shaft, clutch release 3 027.293 1 Seal, dust 4 027.292 1 Bush kit, clutch shaft 5 027.294 1 Fork, clutch release 6 165.193 1 Bolt, fork lockating 7 164.088 1 Washer, spring 8 020.160 1 Housing, clutch 9 024.325 1 Oil seal, differential

10 024.327 1 Oil seal, gear shift rod 11 172.727 2 Dowel, housing 12 024.323 1 Bearing, countershaft 13 024.324 1 Plate, oil guide 14 024.321 1 Bearing, mainshaft 15 024.322 1 Oil seal, mainshaft

16 024.326 1 Magnet, transmission 17 024.383 1 Gear, speedo drive, 20 teeth 18 165.154 1 Screw, locking 19 016.550 1 ‘O’ Ring 20 024.384 1 Rod, gearshift 21 024.385 1 Dust cap, shift rod 22 024.388 1 Arm, reverse change 23 024.389 1 Ball 24 024.386 1 Gearshift piece 25 024.387 1 Bolt, gearshift piece 26 164.088 1 Washer, spring 27 024.390 3 Bolt, M6 x 22.5 28 024.391 1 Interlock 29 024.392 1 Gearshift piece

ILL N° PART N° QTY DESCRIPTION APPLICATION30 024.393 1 Shaft 31 024.394 1 Holder, gear shift 32 024.395 1 Bolt, M6 x 18 33 024.396 1 Bolt, special, M8 34 024.397 1 Set screw, ball & spring 35 024.398 1 Spring 36 024.389 1 Ball 37 024.400 1 Fork, 1st & 2nd gear 38 024.399 1 Shaft, 1st & 2nd 39 024.404 1 Selector 5th & reverse 40 024.405 1 Pin, spring 41 024.403 1 Fork, 3rd & 4th 42 024.402 1 Fork, 5th 43 024.401 1 Shaft, forks 44 024.405 1 Knob, gear change 45 024.406 1 Gearshift assembly 46 024.407 1 Cable, crossgate, 218cm 47 024.408 1 Cable, selector, 171cm 48 122.337 7 Insert grommet 49 165.165 3 Screw M6 50 161.586 4 Nut 51 137.091 1 Bracket, cable support 52 172.734 1 Pin, spring 53 172.735 1 Retainer for pin 54 172.732 1 Clip, cable 55 137.092 1 Bracket, cable crossgate 56 165.201 2 Screw, M12 57 172.733 2 Clip, cable retention 58 137.093 1 Bracket, cable select 59 024.409 1 Pivot assembly

Page 19: FOR BEST RESULTS DO NOT - Anglo Parts · PDF fileFOR BEST RESULTS DO NOT PRINT THIS PAGE! This page will interfere with the correct page order when printing recto-verso. Quality Parts

16© Van Geste l B&C 2013Quality Par ts & Service

MGF 1996-2002 & MGTF 2002-2005

Transmission ( part two ) and differential

ILL N° PART N° QTY DESCRIPTION1 020.161 1 Casing, transmission 2 086.464 1 Switch, reverse light 3 163.213 1 Washer for switch 4 165.197 12 Bolt, M10 x 42 5 165.198 2 Bolt, M10 x 92 6 165.199 1 Bolt, plug 7 163.213 1 Sealing washer 8 024.345 1 Oil seal, differential 9 165.194 1 Sealing bolt, 32mm

10 165.195 1 Sealing bolt, 16mm 11 165.200 1 Plug, screwed 12 168.186 1 Washer, sealing 13 165.196 1 Bolt, M10 x 1.25 14 163.216 1 Washer, sealing 15 024.347 1 Clamp, breather hose 16 024.348 1 Plug, connecting 17 024.346 1 Hose, breather 18 172.728 1 Clip, hose to casing 19 024.328 1 Plate, oil guide 20 024.330 A/R Shim, 0.50mm

024.331 A/R Shim, 0.55mm 024.332 A/R Shim, 0.60mm 024.333 A/R Shim, 0.65mm 024.334 A/R Shim, 0.70mm 024.335 A/R Shim, 0.75mm 024.336 A/R Shim, 0.80mm 024.337 A/R Shim, 0.85mm 024.338 A/R Shim, 0.90mm 024.339 A/R Shim, 0.95mm 024.340 A/R Shim, 1.00mm 024.341 A/R Shim, 1.05mm 024.342 A/R Shim, 1.10mm 024.343 A/R Shim, 1.15mm

ILL N° PART N° QTY DESCRIPTION21 024.329 1 Clip, washer 22 024.344 1 Bearing, mainshaft 23 024.360 1 First motion shaft, 15 teeth C4BP

024.361 1 First motion shaft, 16 teeth C6BP 24 024.362 A/R Shim, 1.96mm

024.363 A/R Shim, 1.99mm 024.364 A/R Shim, 2.02mm 024.365 A/R Shim, 2.05mm 024.366 A/R Shim, 2.08mm

25 024.368 1 Needle roller bearing 26 024.367 1 1st Speed gear, 37 teeth 27 024.369 1 1st & 2nd Synchronizer 28 024.371 1 Distance collar, ‘A’

024.373 1 Distance collar, ‘B’ 29 024.375 1 Needle roller bearing 30 024.374 1 2nd Speed gear, 35 teeth 31 024.376 1 3rd Speed gear, 34 teeth 32 024.377 1 4th Speed gear, 31 teeth 33 024.378 1 5th Speed gear, 26 teeth 34 024.379 1 Bearing assembly 35 024.380 1 Circlip ring, bearing 36 024.381 1 Washer, spring 37 024.382 1 Nut 38 024.358 1 Shaft, reverse 39 172.729 1 Pin 40 163.217 1 Washer 41 024.359 1 Gear, reverse, 24 teeth 42 024.349 1 Mainshaft, 19/13/12 teeth 43 024.351 1 Needle roller bearing 44 024.350 1 3rd Speed gear, 26 teeth 45 024.352 1 3rd & 4th Synchronizer 46 024.353 1 4th Speed gear 47 024.355 1 Colar, distance

ILL N° PART N° QTY DESCRIPTION48 024.351 2 Needle roller bearing 49 024.356 1 5th Speed gear, 34 teeth 50 024.357 1 5th Synchronizer assembly 51 030.104 1 Diff.assembly 52 032.708 1 Gear, final 63 teeth C48P

032.709 1 Gear, final 63 teeth C68P 53 032.710 10 Bolt, gear to case 54 032.707 2 Bearing, differential 55 032.706 1 Speedo drive, 23 teeth 56 030.105 1 Casing, differential 57 172.730 1 Pin, pinion locking 58 032.711 1 Snap ring, 2.50 mm

032.712 1 Snap ring, 2.60 032.713 1 Snap ring, 2.70 032.714 1 Snap ring, 2.80 032.715 1 Snap ring, 2.90 032.716 1 Snap ring, 3.00

59 032.694 1 Shaft, pinion 60 032.695 2 Gear, differential 61 032.697 2 Washer, thrust 62 032.696 2 Pinion, differential 63 032.698 2 Thrust washer, pinion 0.70mm

032.699 2 Thrust washer, pinion 0.75 032.700 2 Thrust washer, pinion 0.80 032.701 2 Thrust washer, pinion 0.85 032.702 2 Thrust washer, pinion 0.90 032.703 2 Thrust washer, pinion 0.95 032.704 2 Thrust washer, pinion 1.00 032.705 2 Thrust washer, pinion 1.05

Page 20: FOR BEST RESULTS DO NOT - Anglo Parts · PDF fileFOR BEST RESULTS DO NOT PRINT THIS PAGE! This page will interfere with the correct page order when printing recto-verso. Quality Parts

17© Van Geste l B&C 2013 Quality Par ts & Service

MGF 1996-2002 & MGTF 2002-2005

Clutch hydraulic system

ILL N° PART N° QTY DESCRIPTION1 053.213 1 Clutch master cylinder 2 052.538 1 Repair kit, master pump 3 052.349 1 Filler cap 4 165.177 2 Screw, pump to bracket 5 161.588 2 Nut 6 052.539 1 Gasket 7 172.724 1 Clevis pin 8 163.215 1 Washer, plain 9 172.725 1 Clip, spring

10 054.460 1 Pipe, pump to damper 11 054.461 1 Pipe, damper to underfloor connector, Left Hand Drive cars 12 137.088 1 Bracket for damper 13 165.191 2 Screw, M6 14 172.726 2 Collar 15 137.089 1 Mounting rubber 16 137.090 1 Damper 17 ....... 1 Mounting plate 18 165.178 3 Screw 19 027.284 1 Bracket & shaft 20 161.588 1 Nut, shaft end

ILL N° PART N° QTY DESCRIPTION21 027.282 1 Clutch pedal, LHD cars 22 027.286 1 Pedal pad 23 027.285 2 Bush, pedal 24 172.719 1 Clip, pedal 25 ....... 1 Pedal return spring, LHD cars

171.080 1 Pedal return spring, RHD cars 26 172.720 2 Bush 27 053.039 1 1 L. Brake & Clutch fluid 28 052.117 1 Rubber grease, to be used with repair kits, hydrolic system. 29 027.290 1 LHD Pipe , MPI, Master pump to connector piece

054.459 1 Pipe, connector piece to slave cylinder ( gearbox ) 30 027.287 1 Slave cylinder assembly 31 027.288 1 Repair kit, slave cylinder 32 165.189 2 Bolt, slave cylinder 33 172.721 1 Clevis pin, slave cylinder 34 172.722 1 Clip for clevis pin 35 027.289 1 Bracket, slave cylinder 36 165.188 2 Screw, M10 x 22 37 165.189 2 Screw, M10 x 20 38 172.723 1 Clip, pipe to slave cyl. bracket

Page 21: FOR BEST RESULTS DO NOT - Anglo Parts · PDF fileFOR BEST RESULTS DO NOT PRINT THIS PAGE! This page will interfere with the correct page order when printing recto-verso. Quality Parts

18© Van Geste l B&C 2013Quality Par ts & Service

MGF 1996-2002 & MGTF 2002-2005

Exhausts systems and heat shields

ILL N° PART N° QTY DESCRIPTION APPLICATION1 016.551 1 Gasket manifold To 522572

116.165 1 Gasket manifold 522573-on2 161.604 4 Nut, manifold to down pipe 3 110.271 1 Downpipe To 522572 ( not Throphy )

110.756 1 Downpipe 522573-on ( not Throphy )110.757 1 Downpipe Throphy

4 110.272 1 Catalytic, Europe To 522572110.758 1 Catalytic 530689 - 618111110.759 1 Catalytic 618112-on110.760 1 Catalytic Throphy 530689 - 618111

5 016.552 2 Gasket, catalytic ends 6 161.604 6 Nut, catalytic fixing 7 110.274 1 Exhaust silencer assembly To 12534

110.761 1 Exhaust box 12535 to 552572, not MGTF/Throphy

110.762 1 Exhaust box 552573-on not MGTF/Throphy 110.761 1 Exhaust box 552573-on Throphy110.763 1 Exhaust box with vacuum valve MGF with vacuum valve/

MGF Trophy or MGTF VVC 110.764 1 Exhaust box MGTF NOT VVC

ILL N° PART N° QTY DESCRIPTION8 110.275 1 RH Tailpipe & trim 9 110.276 1 LH Tailpipe & trim

10 111.195 1 Bracket, silencer to catalytic 11 111.113 1 Mounting rubber, downpipe 12 111.194 1 Bracket-hook, silencer 13 161.588 2 Nut, M8, hook to silencer 14 111.196 2 Mounting rubber, silencer to body 15 111.197 2 Metalstrap reiforement strap 16 165.232 4 Screw, rear mountings 20 136.265 1 Heat shield, exhaust 21 137.106 1 Bracket, upper 22 165.233 1 Screw, upper bracket 23 137.107 1 Bracket, lower 24 165.234 2 Screw, shield to bracket 25 151.796 1 Engine compartment lid 26 151.797 1 Heat shield, fuel tank 27 161.605 5 Nut, heatshield to body 28 151.798 1 Heat shield, silencer 29 165.212 4 Screw, heatshield to rear floor brackets 30 110.798 1 Catalist by-pass pipe

For more exhaust systems see page 47

Engine, exhaust and suspension improvements

Page 22: FOR BEST RESULTS DO NOT - Anglo Parts · PDF fileFOR BEST RESULTS DO NOT PRINT THIS PAGE! This page will interfere with the correct page order when printing recto-verso. Quality Parts

19© Van Geste l B&C 2013 Quality Par ts & Service

MGF 1996-2002 & MGTF 2002-2005

Radiator, hoses and water pipes

ILL N° PART N° QTY DESCRIPTION APPLICATION1 060.058 1 Radiator assembly 2 061.278 1 Bleed screw 3 061.279 4 Mounting rubber 4 061.280 2 Upper bracket 5 165.191 4 Screw, fixing 6 061.281 1 Cooler fan & motor 7 062.193 1 Upper hose to coolant pipe 8 062.194 1 Lower hose to coolant pipe 9 172.772 4 Clamp

10 172.773 4 Support clip 11 161.602 4 Nut 12 134.615 1 Pipe assembly ( double ) 13 172.774 6 Clip, battery cable to pipe 14 165.232 3 Screw, pipe to body 15 062.195 1 Hose, from pump 16 062.198 1 Hose, from engine to pipe & heater 17 172.772 3 Clamp 18 172.778 1 Clamp, engine outlet 19 061.282 1 Adaptor piece 20 172.775 1 Clamp 21 062.196 1 Hose, heater return 22 062.197 1 Hose, engine hose to heater pipe 23 172.777 2 Clamp 24 172.779 1 Clamp hose to hose 25 172.780 1 Clamp hose to small hose 26 061.288 1 Fan & motor, engine bay 27 161.602 2 Nut 30 063.325 1 Valve, heater 31 165.236 2 Screw for valve

ILL N° PART N° QTY DESCRIPTION APPLICTATION32 172.785 6 Clamp, small 33 062.205 1 Hose, valve to heater 34 062.204 1 Hose, valve to pipe 35 062.206 1 Hose, heater to pipe 36 134.617 1 Pipe assembly, heater ( double ) 37 165.236 2 Screw, pipe fixing 38 062.199 1 Hose, heater bypass

062.200 1 Hose, heater bypass VVC39 061.282 1 Adaptor 40 172.781 1 Clamp 41 061.283 1 Valve, bleed 42 172.775 1 Clamp, hose to valve 43 172.782 1 Clip hose, bypass to engine 44 172.777 1 Clip hose, bypass to coolant rail 45 134.616 1 Pipe assembly, coolant 46 165.178 2 Screw, pipe to engine 47 172.782 2 Clip hose, bypass to rail 48 062.203 1 Hose, thermostat 49 172.784 2 Clip, expansion hose 50 062.201 1 Hose, expansion tank 51 061.284 1 Expansion tank 52 061.285 1 Mountin rubber, tank 53 165.235 2 Screw, expansion tank 54 061.286 1 Cap, pressure 55 062.202 1 Hose, expansion tank bleed To 600100

062.456 1 Hose, expansion tank bleed 600100on56 172.783 3 Clamp for hose 062.202 57 186.159 1 4L. Castrol anti freeze, all season protection

( down to -25°C )

57

Page 23: FOR BEST RESULTS DO NOT - Anglo Parts · PDF fileFOR BEST RESULTS DO NOT PRINT THIS PAGE! This page will interfere with the correct page order when printing recto-verso. Quality Parts

20© Van Geste l B&C 2013Quality Par ts & Service

MGF 1996-2002 & MGTF 2002-2005

Heater installation

ILL N° PART N° QTY DESCRIPTION APPLICATION1 063.331 1 LHD Heater assembly 2 161.608 3 Nut, heater to body 3 086.475 1 Resistor pack 4 063.333 1 Lever, air valve 5 063.336 1 Matrix, heater 6 165.237 1 Bleed screw 7 063.334 1 Motor & fan, LHD cars 8 080.275 1 Harness, heater 9 063.338 1 Air duct, inlet

10 161.608 1 Nut, ait duct to body 11 063.339 2 Air hose, desmist 12 063.337 1 Box, distribution air intake 13 165.238 4 Screw

ILL N° PART N° QTY DESCRIPTION APPLICATION14 063.326 1 Heater control assembly 15 063.329 1 Cable, distribution 16 063.330 1 Cable, temp.control 17 086.474 1 Switch, fan speed 18 063.327 3 Control knob 19 ....... 1 Control panel, outer 20 063.328 1 Panel, graphics 21 ....... 3 Lens, illumination 22 ....... 1 Base plate, kontrol knobs 23 162.060 6 Screw 24 084.685 2 Bulb, illumination 25 165.236 4 Screw, control assembly fixing

Page 24: FOR BEST RESULTS DO NOT - Anglo Parts · PDF fileFOR BEST RESULTS DO NOT PRINT THIS PAGE! This page will interfere with the correct page order when printing recto-verso. Quality Parts

21© Van Geste l B&C 2013 Quality Par ts & Service

MGF 1996-2002 & MGTF 2002-2005

Airconditioning

ILL N° PART N° QTY DESCRIPTION APPLICATION1 063.340 1 Compressor pump assembly 2 165.242 1 Bolt, pump to bracket, front 3 165.241 2 Bolt, pump to bracket, rear 4 061.289 1 Belt, alternator & pump 5 165.243 2 Bolt, pipe to compressor pump 6 063.341 1 ‘O’ Ring, suction

063.342 1 ‘O’ Ring, discharge 7 011.815 1 Mounting bracket, alternator and compressor

pump 8 ....... 1 Mounting plate 9 172.787 2 Dowel

10 165.240 5 Bolt, bracket to block 11 163.225 1 Washer, bolt retaining 12 165.239 1 Screw, tensioning 13 137.109 1 Spindle, tensioner 14 137.108 1 Plate, tensioner 15 165.178 3 Screw 16 081.618 1 Pully, tensioner 17 161.609 1 Elongater nut 18 163.215 1 Washer, plain 19 163.226 1 Sliding bush, alternator 20 060.060 1 Condensor, radiator 21 061.290 4 Mounting rubber 22 061.292 2 Bracket, upper ( to V 004883 )

061.292 1 Bracket, upper ( from V 004884 ) 23 165.166 2 Screw, bracket 24 161.611 2 Nut 25 063.355 1 Receiver, drier assembly 26 165.245 2 Screw 27 071.038 1 Hose, suction 28 071.039 1 Hose, discharge 29 134.618 1 Pipe, suvtion - underfloor

ILL N° PART N° QTY DESCRIPTION APPLICATION30 134.619 1 Pipe, discharge - underfloor 31 071.041 1 Pipe, LHD, Evaporator, suction 32 172.774 3 Clamp, pipe to coolant pipe 33 071.040 1 Pipe, condensor, discharge 34 134.620 1 Pipe, LHD, drier to evaporator 35 071.043 1 Pipe, LHD, Condensor to drier

071.044 1 Pipe, RHD, Condensor to drier 36 165.233 2 Bolt, pipes to drier 37 165.233 2 Bolt, pipes to condensor 38 172.775 1 Clip, condensor pipes to body 39 172.788 1 Clip for 18mm pipe

172.789 1 Clip for 24mm hose 40 165.233 1 Nut, clip to body

161.605 1 Nut, clip to underfloor 41 172.776 1 Clip for RHD cars only 42 063.356 4 Sealing ring, 7 mm

063.342 4 Sealing ring, 9 mm 063.341 4 Sealing ring, 14 mm

43 063.357 1 Cap & seal, charge valve, liquid 063.358 1 Cap & seal, charge valve, suction

44 063.343 1 Evaporator assembly for LHD cars 45 063.345 1 Seal, evaporator/heater 46 161.610 2 Nut, evaporator fixing 47 063.347 1 Matrix for LHD cars 48 063.351 1 Valve, expansion pipes to evaporator 49 165.233 1 Screw, pipe to valve 50 063.352 1 Seal,’O’ ring small 51 063.353 1 Seal,’O’ ring large

063.354 1 Seal kit, evaporator 53 063.349 1 Servo motor for LHD cars 54 063.346 1 Thermostat 55 080.276 1 Harness, electrical

Page 25: FOR BEST RESULTS DO NOT - Anglo Parts · PDF fileFOR BEST RESULTS DO NOT PRINT THIS PAGE! This page will interfere with the correct page order when printing recto-verso. Quality Parts

22© Van Geste l B&C 2013Quality Par ts & Service

MGF 1996-2002 & MGTF 2002-2005

Fuel system

ILL N° PART N° QTY DESCRIPTION APPLICATION1 100.052 1 Fuel tank 2 134.611 1 RH Strap assembly 3 134.612 1 LH Strap assembly 4 101.886 1 Hose, vent 5 172.404 2 Clamp for vent hose 6 101.883 1 Fuel pump & sending unit To YD522572

108.781 1 Fuel pump & sending unit 522573 to 634733108.782 1 Fuel pump & sending unit 634734-on

7 101.884 1 Locking ring To YD522572108.783 1 Locking ring YD522573-on

8 101.885 1 Sealing ring To YD522572108.749 1 Sealing ring YD522573-on

9 101.887 1 Pipe, fuel filler 10 101.891 1 Filler cap & lock

167.252 1 Lockating stud, filler cap 12 165.231 2 Screw, pipe to body 13 161.603 5 Nut, pipe fixing 14 101.889 1 Hose, filler neck to tank 15 172.771 2 Clamp 16 086.473 1 Inertia switch 17 165.229 2 Screw, switch to body 18 101.872 1 Resonator assembly 19 165.162 2 Screw, resonator to body 20 163.222 2 Washer, plain 21 122.339 2 Grommet, rubber 22 137.103 2 Insert

ILL N° PART N° QTY DESCRIPTION APPLICATION23 101.873 1 Hose, cold air intake 24 172.764 1 Clip, hose to resonator 25 172.763 2 Cable clamp , hose to body 26 172.765 2 Clip, cable clamp 27 101.880 1 Fuel line assembly 28 101.881 1 Breather hose 29 172.767 2 Clip, breather hose 30 101.882 1 Hose, fuel return to pipe 31 172.768 1 Clamp for hose 32 172.770 1 Clamp for double pipe 33 172.769 2 Clamp for triple pipe 34 161.602 1 Nut, fuel line to body 35 104.174 1 Canister carcoal assembly 36 104.175 1 Bracket, canister 37 165.156 1 Screw for bracket 38 104.176 1 Valve 39 172.404 1 Clip, vent hose 40 101.878 1 Fuel filter 41 101.879 1 Adaptor pipe, outlet 42 137.105 1 Bracket, fuel filter 43 165.204 2 Screw, bracket to body 44 163.223 2 Washer 45 161.602 2 Nut 46 163.224 2 Distance piece 47 122.341 2 Grommet, insulation

Page 26: FOR BEST RESULTS DO NOT - Anglo Parts · PDF fileFOR BEST RESULTS DO NOT PRINT THIS PAGE! This page will interfere with the correct page order when printing recto-verso. Quality Parts

23© Van Geste l B&C 2013 Quality Par ts & Service

MGF 1996-2002 & MGTF 2002-2005Accelerator control, air cleaner, throttle body, fuel rail

and injectors

ILL N° PART N° QTY DESCRIPTION APPLICATION1 101.875 1 LHD Accelerator cable 2 137.104 1 VVC Bracket, cable/inlet manifold

165.166 1 Screw for bracket 3 172.766 1 Clip, cable to pedal 4 172.748 6 Clamp, cable to body 5 101.874 1 LHD Pedal & bracket assembly 6 161.586 2 Nut, bracket to dash, lower 7 165.178 2 Screw, pedal ass. to bracket 8 161.588 2 Nut, pedal ass.to bracket 9 165.225 1 Screw, side

10 122.340 1 Grommet, pedal stop 11 101.869 1 Air cleaner assembly 12 101.870 1 Air cleaner element 13 101.871 1 Hose, cleaner to throttle body 14 172.760 1 Clamp, filter casing side 15 172.761 1 Clamp, throttle body side 16 136.264 1 Bracket, air cleaner 17 137.102 1 Grommet 18 122.339 2 Mounting grommet 19 172.762 1 Snap fit, air filter to bracket 20 165.166 3 Screw, bracket fixing 21 105.047 1 Body, throttle

105.355 1 ‘O’ ring kit, throttle body22 165.227 4 Screw, body throttle to manifold

ILL N° PART N° QTY DESCRIPTION APPLICATION23 062.191 1 Hose, throttle body to bypass To YD522572

062.457 1 Hose, throttle body to bypass YD522573-on24 172.... 2 Clamp for hose 25 105.048 1 Motor housing assembly 26 165.226 2 Screw, motor to inlet manifold 27 105.050 2 Screw 28 105.052 4 Injector, fuel MGF to YD522572

105.353 4 Injector MGF YD522573-on (Not VVC)

105.354 4 Injector VVC29 105.053 4 Clip, injector to rail 30 105.051 1 Rail & pressure regulator 31 165.147 2 Bolt, rail to inlet manifold 32 062.192 1 Vacuum hose, regulator/manifold 33 172.758 1 Clip 34 101.864 1 Hose, fuel feed. Comes from the fuel filter 35 165.228 2 Screw 36 101.867 1 Hose, return pipe 37 101.865 1 Pipe, return MPI cars only

101.866 1 Pipe, return VVC cars only38 165.228 2 Screw, pipe to inlet manifold MPI

165.224 2 Screw, pipe to inlet manifold VVC39 101.868 1 Hose, return pipe to canister 40 172.759 3 Clip, hose

Page 27: FOR BEST RESULTS DO NOT - Anglo Parts · PDF fileFOR BEST RESULTS DO NOT PRINT THIS PAGE! This page will interfere with the correct page order when printing recto-verso. Quality Parts

24© Van Geste l B&C 2013Quality Par ts & Service

MGF 1996-2002 & MGTF 2002-2005

Ignition system

ILL N° PART N° QTY DESCRIPTION APPLICATION1 081.629 1 ECU MGF 1800 Manual Exchange To 522572

181.165 1 ECU MGF/TF 1800 ABS Manual & Auto To 639328181.166 1 ECU MGF Manual NOT ABS181.167 1 ECU MGTF ABS Manual & Auto 639239-on081.631 1 ECU MGF VVC To 522572181.168 1 ECU MGF VVC 522573 to 600100181.169 1 ECU Throphy & TF 160PS

2 137.111 1 Bracket 3 161.395 3 Nut, plastic 4 122.343 1 Cushion, stopper 5 081.630 1 Vacuum pipe, engine 6 081.621 1 H.T. Cable set To YD522572

181.171 1 H.T. Cable set YD522573-on7 181.228 1 Cap, distributor 8 081.619 1 Rotor arm 9 165.246 1 Screw, rotor arm

10 081.620 1 Mounting plate, cap 11 ....... 1 ..................... 12 ....... 1 ........ 13 137.110 1 Bracket, harness link 14 172.792 1 Clip, king lead 15 012.702 1 Cover plate, spark plug 16 081.622 2 Cable spacer 17 012.718 4 Spark plug 18 081.623 1 Ignition coil To YD522572

181.170 1 Ignition coil YD522573-on19 165.244 1 Screw, bottom 20 165.169 2 Screw, side 21 081.624 1 H.T. Lead set VVC to YD522572

181.171 1 H.T. Lead set VVC YD522573-on22 081.627 1 Ignition coil and bracket VVC to YD522572

181.172 1 Ignition coil and bracket VVC YD522573-on23 081.628 1 Spacer, coil VVC24 137.110 1 Bracket, link harness 25 081.626 1 Clip, H.T.cables VVC

ILL N° PART N° QTY DESCRIPTION APPLICATION26 086.482 1 Sensor, camshaft VVC to YD522572

088.600 1 Sensor, camshaft VVC YD522573-on & MGTF088.601 1 Sensor, camshaft NOT VVC168.325 1 ‘O’ ring for 088.601

27 165.156 1 Screw 28 086.483 1 Sensor, manifold pressure VVC to WD32399

088.076 1 Sensor, manifold pressure MGF VVC WD32400 to YD522572088.599 1 Sensor, manifold pressure N VVC & VVC YD522573-on

29 011.816 1 Sensor, crankshaft 30 165.247 1 Screw 31 012.399 1 Sensor, engine temperature 32 086.478 1 Transducer, oil temperature Up to (AD) 001017 150°

086.479 1 Transducer, oil temperature From (AD) 1018 to XD511057086.479 1 Transducer, oil temperature VVC088.597 1 Transducer, oil temperature XD511059-on and MGTF088.598 1 Transducer, oil temperature To XD511058 NON VVC

33 012.722 1 Transducer, coolant temperature 34 016.553 1 Gasket 36 012.721 1 Sensor, temperature To YD522572 (brown)

088.596 1 Sensor, temperature YD522573-on37 172.715 1 Insert piece 38 161.612 1 Nut, sensor to scuttle 39 086.476 1 Sensor, air inlet temperature 40 012.720 1 Sensor, oxygen To YD522572

018.043 1 Sensor, oxygen YD522573-on41 165.247 1 Screw, sensor 42 086.480 1 Switch, oil pressure

088.501 1 Switch, oil pressure ( brown )43 080.277 1 Harness, Engine Aircon. MPI

080.280 1 Harness, Engine Aircon. VVC080.278 1 Harness, Engine MPI080.281 1 Harness, Engine VVC080.282 1 Harness, Engine VVC & Automatic080.279 1 Harness, engine fuel incestor MPI080.283 1 Harness, engine fuel injector VVC

44 172.774 3 Clip, engine harness

Page 28: FOR BEST RESULTS DO NOT - Anglo Parts · PDF fileFOR BEST RESULTS DO NOT PRINT THIS PAGE! This page will interfere with the correct page order when printing recto-verso. Quality Parts

25© Van Geste l B&C 2013 Quality Par ts & Service

MGF 1996-2002 & MGTF 2002-2005

Front suspension

ILL N° PART N° QTY DESCRIPTION1 042.739 2 Hydrogas unit, front

045.368 2 Hydrogas unit, front, Trophy 2 071.032 1 Pipe, RH Front

071.033 1 Pipe, LH Front 071.034 1 Pipe, RH Underfloor 071.035 1 Pipe, LH Underfloor 071.036 1 Pipe, RH Rear 071.037 1 Pipe, LH Rear 041.659 1 Valve

3 172.737 8 Retainer for pipe 4 172.738 2 Retainer, pipe to buttress

172.739 2 Retainer, pipe to rear subframe 5 041.662 2 Rubber, bump stop 6 172.741 2 Clip, bump stop retainer 7 041.453 2 Buffer, rebound 8 162.060 2 Screw 9 041.660 2 Spring

10 042.740 2 Joint knuckle 048.233 2 Spacer 3.6mm

11 042.741 2 Shock absorber, incl.bushes, MGF045.366 2 Shock absorber, MGTF to 639690045.367 2 Shock absorber, MGTF 639691-on042.791 2 Spax, adjustable sport damper

12 165.203 2 Bolt, shock absorber fixing 13 041.661 2 Spacer, shock absorber 14 163.218 4 Washer 15 161.591 2 Nut, nyloc

ILL N° PART N° QTY DESCRIPTION16 042.743 1 RH Upper arm, MGF

045.372 1 RH Upper arm, MGTF042.744 1 LH Upper arm, MGF 045.373 1 LH Upper arm, MGTF

17 041.421 4 Bearing, needle roller 18 042.784 2 Kit, shaft & fittings, to 532349

045.371 2 Kit, shaft & fittings, 532350-on19 161.277 4 Nut 20 041.672 2 Grease nipple 21 165.204 2 Screw, plate to tower (use with washer & nut)

165.205 2 Screw, plate to tower 22 163.087 4 Washer, plain 23 161.592 2 Nut, locking 24 042.742 2 Joint ball assembly, upper, MGF

045.374 2 Joint ball assembly, upper, MGTF25 041.663 2 Lock plate, swivel 26 041.664 2 Lock plate, arm 27 041.665 2 Nut 28 042.724 1 RH Lower arm assembly, MGF

042.725 1 LH Lower arm assembly, MGF 045.357 1 RH lower arm, MGTF045.358 1 LH lower arm, MGTF045.359 1 RH arm, Trophy045.360 1 LH arm, Trophy

29 041.669 2 Bush, front - lower 048.168 2 Bush front - lower, polyurethane041.670 2 Bush, rear - lower 048.169 2 Bush rear - lower, polyurethane

ILL N° PART N° QTY DESCRIPTION30 041.671 4 Bolt, lower arm fixing 31 165.179 2 Bolt, ball joint to swivel hub 32 161.589 2 Nut, nyloc 33 042.745 1 RH Lower joint assembly

042.746 1 LH Lower joint assembly 34 165.151 6 Bolt, joint to arm 35 161.593 6 Nut, joint to arm 36 042.770 1 RH Swivel

042.771 1 LH Swivel 37 042.775 2 Stub axle, NON ABS cars

042.776 2 Stub axle, ABS cars 38 042.772 1 RH Steering arm

042.773 1 LH Steering arm 39 043.294 4 Dowel 40 163.004 4 Washer 41 165.215 4 Bolt 42 042.774 2 Bearing kit, front hub 43 041.679 2 Nut, stake drive shaft 44 042.777 2 Flange, hub 45 167.250 8 Stud 46 050.197 1 Pair of discs, front brake, MGF & MGTF

050.587 1 Pair of discs, front brake, MGTF160 & Trophy

47 165.216 4 Screw, disc to hub 48 165.217 4 Bolt, caliper to hub 49 045.369 2 Front spring, to 639630

045.370 2 Front spring, 639631-on50 048.234 2 Collar front spring, MGTF

Page 29: FOR BEST RESULTS DO NOT - Anglo Parts · PDF fileFOR BEST RESULTS DO NOT PRINT THIS PAGE! This page will interfere with the correct page order when printing recto-verso. Quality Parts

26© Van Geste l B&C 2013Quality Par ts & Service

MGF 1996-2002 & MGTF 2002-2005

Steering

ILL N° PART N° QTY DESCRIPTION APPLICATION1 042.747 1 Anti roll bar MGF

045.361 1 Anti roll bar MGTF to 617816045.362 1 Anti roll bar MGTF to 617817-640464045.363 1 Anti roll bar MGTF 640465-on

2 042.748 1 RH Link, anti roll bar MGF & MGTF to 617816 042.749 1 LH Link, anti roll bar MGF & MGTF to 617816045.364 2 Link anti roll bar MGTF 617817-on

3 165.206 4 Bolt, link 4 161.594 4 Nut 5 042.750 2 Mounting bush, rubber 6 042.751 2 Clamp, anti roll bar 7 165.207 4 Bolt for clamp

10 134.604 1 Column, manual steering 11 134.605 1 Column, electrical power steering 12 134.606 1 LHD Lower column 13 165.211 1 Bolt, lower column to steering rack 14 165.210 2 Bolt, column to upper body 15 136.263 1 Bracket, lower 16 165.207 2 Bolt, bracket to body 17 165.207 4 Bolt, column to bracket 18 137.099 1 LHD Sealing cover, From V 00710419 137.098 1 Gasket for seal 23 165.212 3 Screw, flange cover to body Used from V 007104-on 24 043.504 1 LHD Steering lock assembly 25 165.213 2 Bolt, shear 26 043.508 2 Key, blank

ILL N° PART N° QTY DESCRIPTION APPLICATION27 134.608 1 LHD Steering rack assembly MGF

234.554 1 LHD Steering rack assembly MGTF28 043.509 2 Track rod end assembly 29 161.591 2 Nut, nyloc 30 161.596 2 Nut, track rod end locking 31 043.510 2 Kit, gaiters and clips 32 042.769 1 U bolt 33 161.599 4 Nut 34 042.767 1 Pad, rack mounting 35 042.768 1 Clamp, rack mounting 36 165.214 2 Bolt, rack mounting 37 185.530 1 Steering wheel, black leather

185.532 1 Steering wheel, black/red leather 042.766 1 Steering wheel, soft feel

38 161.598 1 Nut, steering wheel 39 086.466 1 LH Horn push 40 086.465 1 RH Horn push 41 159.169 1 Module, airbag 42 165.325 2 Bolt, airbag bracket 43 165.331 2 Torx bolt, module to steering wheel 44 159.174 1 Module, airbag passenger, Ash Grey 45 161.624 4 Nut, module to fascia 46 165.332 2 Bolt, module to support tube 47 086.467 1 Upper half, cowl 48 086.468 1 Lower half, cowl

086.469 1 Sealing ring, cowl 50 165.209 3 Screw for cowl

Page 30: FOR BEST RESULTS DO NOT - Anglo Parts · PDF fileFOR BEST RESULTS DO NOT PRINT THIS PAGE! This page will interfere with the correct page order when printing recto-verso. Quality Parts

27© Van Geste l B&C 2013 Quality Par ts & Service

MGF 1996-2002 & MGTF 2002-2005

Rear suspension and drive shaft

ILL N° PART N° QTY DESCRIPTION1 042.759 2 Hydragas unit, rear

045.368 2 Hydragas unit, rear, Trophy2 ....... 2 Bracket, bomp stop 5 ....... 2 Dust excluder 6 041.662 2 Bump stop rubber 7 172.741 2 Clip, bump stop 8 041.453 2 Rebound buffer 9 162.060 2 Screw

10 042.760 2 Rear shock absorber 042.791 2 Spax adjustable shock absorber, MGF045.375 2 Rear damper, MGTF to 639630045.376 2 Rear damper, MGTF 639631-on

11 165.203 2 Bolt, rear shock absorber 12 041.661 2 Spacer 13 163.218 4 Washer, plain 14 161.591 2 Nut 15 041.660 2 Spring 16 042.740 2 Joint knuckle assembly 17 042.743 1 RH Upper arm, MGF

042.744 1 LH Upper arm, MGF 18 042.784 1 Kit, support shaft & fittings 19 161.065 4 Nut 20 165.204 2 Screw 21 165.205 2 Screw 22 163.087 4 Washer 23 161.592 2 Nut 24 042.742 2 Joint ball upper, complete 25 041.663 2 Washer, lock lower 26 041.664 2 Washer, lock upper 27 041.665 2 Nut 28 042.778 1 RH Rear hub, NOT ABS

ILL N° PART N° QTY DESCRIPTION28 042.779 1 LH Rear hub, NOT ABS

042.780 1 RH Rear hub, ABS 042.781 1 LH Rear hub, ABS

29 042.782 1 RH Bracket, anti roll bar 042.783 1 LH Bracket, anti roll bar

30 165.218 4 Bolt for bracket 31 042.774 2 Bearing kit, rear 32 041.679 2 Nut, stake drive shaft 33 042.777 2 Flange 34 167.250 8 Stud, wheel 35 050.201 1 Pair rear brake discs 36 165.216 4 Screw, disc to flange 37 042.761 2 Lower arm 38 041.669 2 Bush, inner side 39 041.671 2 Bolt, inner side 40 163.... 2 Washer 41 041.674 4 Bush, compliance arm to tie bar 42 163.219 2 Washer, tie bar

163.220 2 Washer, tie bar 43 161.595 2 Nut, tie bar 44 041.673 2 Bush, outer 45 163.221 2 Washer 46 165.208 2 Bolt, lower arm to hub 47 042.765 2 Arm, anti track control 48 161.596 2 Nut, arm to hub 49 041.671 2 Bolt, arm to subframe 50 2 Washer 51 042.762 2 Tie rod 52 165.179 2 Bold, tie rod to subframe 53 042.763 1 Rear anti-roll bar

234.555 1 Rear anti-roll bar, MGTF

ILL N° PART N° QTY DESCRIPTION54 042.764 2 Link assembly

048.239 1 RH rear link anti-roll bar, MGTF048.240 1 LH rear link anti-roll bar, MGTF

55 165.179 4 Bolt, link 56 161.594 4 Nut, link 57 041.678 2 Bush, anti roll bar 58 041.677 2 Bracket, bush 59 161.588 4 Nut, bracket to body 60 042.752 1 RH Drive shaft assembly

042.753 1 LH Drive shaft assembly 61 172.742 2 Retaining clip 62 042.755 1 Kit, dynamic dampr, RH ONLY ! 63 042.754 2 Boot kit, inner tripode 64 042.756 2 Velocity joint, NON ABS cars

042.757 2 Velocity joint, ABS cars 65 042.758 2 Boot kit, outer side 66 045.377 2 Rear spring, MGTF to 639630

045.378 2 Rear spring, MGTF 639631-on70 045.381 2 Upper link assembly, MGTF to 620745

045.382 2 Upper link assembly, MGTF 620746-on71 234.556 1 RH track control arm, MGTF

234.557 1 LH track control arm, MGTF72 045.379 1 RH lower arm assembly, MGTF

045.380 1 LH lower arm assembly, MGTF73 045.383 1 RH upper arm, MGTF

045.384 1 LH upper arm, MGTF74 048.241 2 Flanged spacer, MGTF75 048.242 2 Spacer, MGTF to 638639

048.243 2 Spacer, MGTF 638640-on

Page 31: FOR BEST RESULTS DO NOT - Anglo Parts · PDF fileFOR BEST RESULTS DO NOT PRINT THIS PAGE! This page will interfere with the correct page order when printing recto-verso. Quality Parts

28© Van Geste l B&C 2013Quality Par ts & Service

MGF 1996-2002 & MGTF 2002-2005

Subframes and engine mountings

ILL N° PART N° QTY DESCRIPTION APPLICTAION1 138.001 1 Subframe, front 2 136.267 1 RH Upper arm

136.268 1 LH Upper arm 3 165.276 6 Screw, Upper arm 4 137.125 1 RH Clamping plate, tower

137.126 1 LH Clamping plate, tower 5 165.207 8 Screw, clamping plate 6 161.588 8 Nut 7 041.681 2 Mounting, front/front frame 8 165.277 2 Bolt, mounting to frame 9 161.615 2 Nut

10 165.210 4 Screw, mounting to body 11 161.588 4 Nut 12 137.127 2 Spacer

137.128 2 Spacer 13 041.682 2 Mounting, rear/front frame MGF

048.235 2 Mounting, rear/front frame MGTF048.236 2 Mounting, rear/front frame Trophy

14 165.279 2 Bolt, rear mounting 15 161.615 2 Nut 16 165.278 6 Screw 20 138.007 1 Subframe, rear 21 136.275 1 RH Upper arm 22 011.824 2 Bush, tie rod 23 165.283 2 Bolt, RH arm 24 165.282 2 Bolt, RH arm 25 136.276 1 LH Upper arm 26 165.285 2 Bolt, LH arm 27 137.128 2 Spacer 28 165.284 2 Bolt, LH arm to tower 29 137.125 1 RH Clamping plate, tower

137.126 1 LH Clamping plate, tower 30 165.207 8 Bolt, clamping plate 31 161.588 8 Nut 32 041.681 2 Mounting, front/rear frame 33 122.349 2 Grommet, mounting to frame

ILL N° PART N° QTY DESCRIPTION APPLICTAION34 165.277 2 Bolt, mounting to frame 35 161.615 2 Nut 36 165.207 4 Screw, mounting to body 37 041.682 2 Mounting, rear frame MGF

048.235 2 Mounting, rear/front frame MGTF048.236 2 Mounting, rear/front frame Trophy

38 165.281 2 Bolt, mounting 39 161.615 2 Nut 40 165.278 6 Screw, mounting to body 50 011.819 1 RH Eng. mounting Up to V 003885

011.820 1 RH Eng. mounting From V 00388651 165.184 2 Screw, mounting to butress 52 161.590 1 Nut, mounting to arm 53 011.823 1 RH arm, eng. mounting 54 011.824 1 Bush for tie rod , upper 55 011.822 1 RH Bracket, eng.mounting 56 165.268 3 Bolt, bracket to engine 57 165.269 1 Bolt, bracket to engine 58 165.270 2 Bolt, arm to RH mounting 59 011.825 1 Rod, upper tie 60 165.271 1 Bolt, arm to tie bar 61 165.271 1 Bolt, tie rod to butress 62 161.590 1 Nut 63 011.827 1 Bracket & bush assembly, sump 64 165.217 4 Screw, bracket to sump 65 011.826 1 Tie rod and bush 66 165.272 1 Bolt, tie rod to sump bracket 67 161.590 1 Nut 68 011.828 1 LH Engine mounting 69 165.190 2 Screw, eng.mounting top bracket 70 165.274 1 Bolt, LH mounting to burtress 71 011.829 1 Spacer for bolt 72 161.614 1 Nut 73 011.830 1 LH bracket to gearbox 74 165.275 1 Bolt, bracket to gearbox

Page 32: FOR BEST RESULTS DO NOT - Anglo Parts · PDF fileFOR BEST RESULTS DO NOT PRINT THIS PAGE! This page will interfere with the correct page order when printing recto-verso. Quality Parts

29© Van Geste l B&C 2013 Quality Par ts & Service

MGF 1996-2002 & MGTF 2002-2005

Brakes

ILL N° PART N° QTY DESCRIPTION APPLICATION1 054.463 1 LHD Brake pedal 2 027.286 1 Pedal rubber, pad 4 027.285 2 Bush, pedal 5 172.719 1 Clip, pedal 6 053.217 1 Master brake pump MGF NON ABS

053.218 1 Master brake pump MGF ABS053.622 1 Master brake pump MGF SN525454-on

7 161.600 2 Nut, pump to servo 8 164.040 2 Washer, spring 9 052.553 1 Repair kit, master cylinder NON ABS

052.554 1 Repair kit, master cylinder ABS10 052.556 1 Seal, reservoir 11 052.555 1 Seal, reservoir 12 053.220 1 Reservoir, incl. seals & filler cap 13 052.558 1 Filler cap & fluid level switch 14 052.557 1 ‘O’ Ring 15 053.219 1 Servo unit To 639634

053.623 1 Servo unit To 639635-on16 052.559 1 Repair kit, servo 17 054.465 1 Vacuum hose MGF

054.946 1 Vacuum hose MGTF18 172.734 3 Clip at engine bay

172.744 1 Clip at cross tube bracket 172.745 1 Clip at hydragas heelboard

19 050.206 1 Modulator, ABS to 511058050.584 1 EC unit for 050.206 To 511058050.583 1 Modulator, ABS 511059-on

20 137.101 1 Bracket 22 122.338 3 Mounting bush 23 172.746 3 Washer, bell & stud 24 161.586 3 Nut 25 050.198 1 RH caliper-front MGF

050.199 1 LH Caliper-front MGF050.585 1 RH caliper-front MGTF 160 & Trophy050.586 1 LH caliper-front MGTF 160 & Trophy

26 050.200 2 Carrier, front caliper 27 165.217 4 Bolt, caliper to hub

ILL N° PART N° QTY DESCRIPTION28 052.540 2 Bleed screw 29 052.245 2 Dust cap 31 052.542 1 Kit, guides and dust caps 32 052.541 1 Repair kit, 2 front calipers MGF

055.050 1 Repair kit, 2 front calipers MGTF33 053.214 1 Brake pad set, front MGF

053.624 1 Brake pad set, front MGTF & Trophy34 052.544 4 Bolt, guide pin 35 050.202 1 RH Housing, rear caliper

050.203 1 LH Housing, rear caliper 36 050.204 1 RH Carrier

050.205 1 LH Carrier 37 165.219 4 Bolt, carrier to hub 39 052.552 1 RH Spring, handbrake lever

052.553 1 LH Spring, handbrake lever 40 052.540 2 Bleed screw 41 052.245 2 Dust cap 42 052.549 1 RH Bracket, handbrake

052.550 1 LH Bracket, handbrake 44 053.215 1 Brake pad set 45 052.545 4 Screw, guide pin 46 052.547 1 Guide pin kit & dust caps 47 052.546 1 Repair kit, 2 rear calipers 48 053.216 2 Piston, caliper 49 086.470 2 Sensor, front

086.471 1 RH Sensor, rear 086.472 1 LH Sensor, rear

50 052.560 2 Adaptor, sensor, RH front/LH rear 052.561 2 Adaptor, sensor, LH front/RH rear

51 165.220 2 Screw, front 165.221 2 Screw, rear

52 053.225 1 1 L. DOT 5 Brake & clutch fluid 53 053.176 1 Easy bleed kit 54 052.117 1 Rubber grease, to be used with all repair kits. 55 186.034 1 Copper grease, high temp. To be used on the

guide pins.

Page 33: FOR BEST RESULTS DO NOT - Anglo Parts · PDF fileFOR BEST RESULTS DO NOT PRINT THIS PAGE! This page will interfere with the correct page order when printing recto-verso. Quality Parts

30© Van Geste l B&C 2013Quality Par ts & Service

MGF 1996-2002 & MGTF 2002-2005

Handbrake, pipes & brake hoses

ILL N° PART N° QTY DESCRIPTION APPLICATION1 054.471 1 Grip, handbrake lever 2 054.470 1 Handbrake lever 3 165.189 2 Screw 4 171.081 1 Spring 5 054.472 1 Equalizer 6 054.473 1 Pin, equalizer 7 054.474 1 Adjusting nut 8 054.478 1 Guide, cable 9 054.475 1 RH Handbrake cable

10 054.476 1 LH Handbrake cable 11 054.477 2 Pin, cable to caliper 12 172.757 2 Clip, pin locking 13 165.204 4 Screw, cable to body 14 172.747 2 Clip, cable to caliper 15 172.755 1 Clip, swivel 16 172.756 1 Clip, cables to air cleaner 20 054.467 1 RH Front brake hose MGF

054.468 1 LH Front brake hose MGF054.947 2 Front brake hose MGTF to 639630054.948 2 Front brake hose MGTF to 639631-on

ILL N° PART N° QTY DESCRIPTION22 054.469 2 Rear brake hose MGF

054.949 2 Rear brake hose MGTF, Throphy23 165.222 2 Bolt, front brake hose 24 161.589 2 Nut, front brake hose 25 052.565 2 Bolt, front brake hose to caliper 26 168.187 4 Copper washer, front 27 172.747 2 Clip, front hose to body 31 052.567 1 3 Way piece, not ABS 32 165.233 1 Bolt, 3 way piece 33 172.748 2 Mounting clip, located at dash

172.750 2 Mounting clip, located at cross tube 34 172.753 5 Clip, underfloor

172.754 1 Clip, underfloor, rear 172.752 2 Spacer, for RHD ABS only

35 052.567 1 3 Way, rear 36 161.586 1 Nut 37 172.751 5 Clip at engine bay

Page 34: FOR BEST RESULTS DO NOT - Anglo Parts · PDF fileFOR BEST RESULTS DO NOT PRINT THIS PAGE! This page will interfere with the correct page order when printing recto-verso. Quality Parts

31© Van Geste l B&C 2013 Quality Par ts & Service

MGF 1996-2002 & MGTF 2002-2005

Wheels - original

ILL N° PART N° QTY DESCRIPTION APPLICATION1 046.109 4 Alloy wheel, not VVC, 6 x 15”

046.110 4 Alloy wheel, VVC, 6 x 15” 2 085.341 4 Central cap & logo 3 161.597 12 Wheel nut, non locking 4 137.094 4 Cap, locking wheel nut 5 200.753 1 Extractor for ill.N°4 (not illustrated) 6 185.538 1 Kit, locking nut

ILL N° PART N° QTY DESCRIPTION APPLICATION7 046.116 1 Spare wheel, 5.5 x 14” 8 137.095 1 Clamp, spare wheel retaining 9 200.754 1 Jack

10 200.755 1 Handle for jack 11 200.756 1 Wheelbrace 12 159.187 1 Stowage bag 13 159.188 1 Strap, stowage bag retention

For more wheels see page 54

Wheels and accessories

Page 35: FOR BEST RESULTS DO NOT - Anglo Parts · PDF fileFOR BEST RESULTS DO NOT PRINT THIS PAGE! This page will interfere with the correct page order when printing recto-verso. Quality Parts

32© Van Geste l B&C 2013Quality Par ts & Service

MGF 1996-2002 & MGTF 2002-2005

Battery, starter motor and alternator

ILL N° PART N° QTY DESCRIPTION application1 082.100 1 Battery BBMS-011

082.101 1 Battery BBMS-063S 2 081.638 1 Cover, terminal 3 137.121 1 Clamping plate 4 165.189 1 Screw, clamping plate 5 080.284 1 Cable, battery + to starter 6 080.285 1 Cable, battery + to fusebox 7 165.264 1 Screw, cable/fusebox 8 172.797 2 Tie for cable 9 080.286 1 Cable, battery - to body 10 165.210 1 Screw, cable/body 11 082.096 1 Starter motor MPI

082.098 1 Starter motor VVC 12 082.097 1 Solonoid MPI

082.099 1 Solonoid VVC 13 081.633 1 Drive assembly MPI 14 081.636 1 Restension kit 15 081.322 1 Pivot kit 16 ....... 1 Bush kit 17 081.634 1 Brush box 18 081.635 1 Brush kit 19 081.637 1 Sundry parts kit 20 082.095 1 Alternator assembly 21 061.293 1 Belt, alternator, for cars without AIRCO

ILL N° PART N° QTY DESCRIPTION application22 061.289 1 Belt, alternator, for cars with AIRCO 23 081.632 1 Adjusting link 24 165.249 1 Bolt, lower 25 161.594 1 Nut 26 165.250 1 Bolt, alternator to link 27 163.135 1 Washer 28 161.594 1 Nut 29 165.251 1 Screw, side 30 165.242 1 Bolt, upper 31 161.594 1 Nut, bolt 32 011.817 1 Bracket, upper 33 167.253 1 Stud, bracket to cyl.head 34 165.248 1 Bolt, bracket to cyl.head 35 011.818 1 Mounting bracket, lower 36 165.179 3 Bolt, bracket to block 37 172.787 2 Dowel 38 136.266 1 Heatshield, fitted when NO airco is installed

137.112 1 Heatshield, airco cars 39 137.113 1 Upper bracket for heatshield 40 165.178 1 Screw, heatshield fixing 41 165.224 2 Screw, bracket to shield 42 ....... 1 Bracket 43 165.169 1 Screw, bottom 44 137.114 1 Bracket, heatshield

Page 36: FOR BEST RESULTS DO NOT - Anglo Parts · PDF fileFOR BEST RESULTS DO NOT PRINT THIS PAGE! This page will interfere with the correct page order when printing recto-verso. Quality Parts

33© Van Geste l B&C 2013 Quality Par ts & Service

MGF 1996-2002 & MGTF 2002-2005

Wiring harness, fuse boxes and relay’s

ILL N° PART N° QTY DESCRIPTION APPLICATION1 080.287 1 LHD Main wiring harness , less electronic power

assisted steering & ABS To 511058

080.288 1 LHD Main wiring harness with electronic power assisted steering & ABS

To 511058

080.293 1 Facia harness less ETS 080.295 1 Facia harness, Air conditioning 080.296 1 Facia harness, airbag less seat belt warning 080.297 1 Facia harness, airbag with seat belt warning

2 086.543 1 Fuse box, passenger compartment 3 086.549 1 Control unit, multi function 4 086.548 1 Relay, rear defrost 5 086.550 1 Flasher unit 6 137.122 1 LHD Bracket, fuse box 7 165.244 2 Screw, bracket to body 8 161.586 2 Nut, fuse box to body 9 086.551 1 Extractor for fuses

10 086.544 A/R Fuse, 10 amp 086.545 A/R Fuse, 15 amp 086.546 A/R Fuse, 20 amp 086.547 A/R Fuse, 30 amp

11 086.552 1 Fuse box, engine bay To 511058088.612 1 Fuse box, engine bay 511059 to MGTF088.613 1 Fuse box, engine bay MGTF

12 086.556 1 Upper cover 13 086.558 1 Lower cover 14 165.266 2 Screw, fuse box to body 15 086.553 1 Fuse block, 30 amp

086.554 1 Fuse block, 40 amp 086.555 1 Fuse block, 60 amp 3 pin

ILL N° PART N° QTY DESCRIPTION APPLICATION16 086.559 1 Fuse holder for electronic power assisted steering 17 086.560 A/R Fuse, maxi electronic assisted steering - 40 amp 18 086.561 1 Cover, fuse 19 086.563 1 Relay, airconditioning To 61031720 086.564 1 Relay, normally open 21 083.954 1 Relay, normally open 22 086.562 1 Relay, engine managment To 610317

088.619 1 Relay, engine managment 610318 on23 086.565 1 Power control unit PAS for steering To 511058

088.614 1 Power control unit PAS for steering 511059-600100088.615 1 Power control unit PAS for steering MGTF

24 137.124 1 Bracket 25 086.530 1 Horn, low note

086.531 1 Horn, high not 26 165.260 2 Screw 27 086.541 1 Kit, airbag control - driver

086.542 1 Kit, airbag control - driver & passenger 28 086.538 1 Control unit, microwave 29 165.262 2 Screw, self tapping 30 086.532 1 Alarm unit, 433MHZ not for Switzerland and Japan

086.533 1 Alarm unit, Switserland 433MHZ 086.534 1 Alarm unit, Japan 315MHZ

31 165.262 2 Tapping screw 32 086.535 2 Transmitter for 433MHZ

086.536 2 Transmitter for 315MHZ 33 086.537 2 Battery for transmitter 34 086.539 1 Switch, bonnet alarm 35 162.060 1 Screw, bonnet switch

Page 37: FOR BEST RESULTS DO NOT - Anglo Parts · PDF fileFOR BEST RESULTS DO NOT PRINT THIS PAGE! This page will interfere with the correct page order when printing recto-verso. Quality Parts

34© Van Geste l B&C 2013Quality Par ts & Service

MGF 1996-2002 & MGTF 2002-2005

Radio, switches and instruments

ILL N° PART N° QTY DESCRIPTION3 196.005 1 Cable, coaxial 4 196.006 1 Mounting cage 5 196.007 1 Bung rubber 6 196.008 1 Master, aerial 7 196.009 1 Base, aerial 8 196.010 2 Speaker, door 9 165.253 6 Grommet

10 165.267 6 Screw 11 086.513 1 Combinated switch assembly 12 086.514 1 Switch, wiper & washer, to 639630

088.610 1 Switch, wiper & washer, to 639631 on13 086.515 1 Switch, direction indicator, to 639630

088.611 1 Switch, indicator+lamp, to 639631 on14 086.516 1 Housing 15 086.517 1 Cam for steering column 16 086.518 1 Coupler, rotary 17 086.508 1 Clock 18 086.509 1 Oil temp. gauge, up to 150¯c

086.510 1 Oil temp. gauge, up to 170¯c 19 086.519 1 Hazard switch 20 086.511 1 Cigar lighter assembly 21 086.512 1 Unit, pop-out 22 086.527 1 Switch, blank 23 086.529 1 Switch, glove box lamp

ILL N° PART N° QTY DESCRIPTION24 086.528 1 Switch, stop lamp, to 514325

088.607 1 Switch, stop lamp, from 514326 on25 086.525 1 Switch, illumination control 26 086.524 1 Switch, air conditioning 27 086.526 2 Switch, electric window, to 511058

088.609 1 Window switch, from 51105928 086.521 1 Switch, fog lamps, front, to 511059

088.605 1 Switch, fog lamps, front, from 511060 29 086.523 1 Switch, air co.recirculation, to 511058

088.608 1 Switch, air co.recirculation, from 51105930 086.522 1 Switch, fog lamp, rear, to 511059

088.606 1 Switch, fog lamp, rear, from 511060 31 086.520 1 Switch, heated rear window, to 511059

088.604 1 Switch, heated rear window, from 51106032 086.496 10 Lamp socket: warning lamps 33 086.497 1 Lamp socket: warning NO BATTERY CHARGE34 086.502 2 Lamp socket: warning fog lamp, rear 35 086.495 1 Lamp socket, illumination 36 165.254 4 Screw, 4 x 12 37 165.255 6 Screw, 3 x 16 38 165.256 5 Screw, 3 x 10 39 165.258 1 Screw, 4 x 12 40 086.493 1 Base, case 41 086.499 1 Printed circuit board for KMH

086.500 1 Printed circuit board for MPH

ILL N° PART N° QTY DESCRIPTION42 086.501 1 Lamp socket assembly 43 137.117 1 Cover 44 086.485 1 Speedometer, KMH

086.486 1 Speedometer, MPH 45 086.487 1 Tachometer, MPI

086.488 1 Tachometer, VVC 46 086.489 1 Fuel gauge 47 086.490 1 Temp. gauge 48 122.346 1 Rubber for speedometer 49 122.347 1 Knop, trip, speedometer 50 086.491 1 Cowl assembly 51 122.345 3 Rubber sleeve 52 086.494 1 Printed panel 53 086.492 1 Illumination assembly 54 086.498 1 Lamp assembly 55 137.115 1 RH Bracket

137.116 1 LH Bracket 56 165.257 2 Tapping screw 57 165.259 4 Tapping screw 60 086.506 1 Speedo cable, upper 61 086.507 1 Speedo cable, intermediate 62 086.505 1 Speedo cable, lower 64 172.796 1 Clip, wiper linkage to cable, LHD 65 172.795 2 Clip, water hose to cable 66 122.348 1 Sealing plug

Page 38: FOR BEST RESULTS DO NOT - Anglo Parts · PDF fileFOR BEST RESULTS DO NOT PRINT THIS PAGE! This page will interfere with the correct page order when printing recto-verso. Quality Parts

35© Van Geste l B&C 2013 Quality Par ts & Service

MGF 1996-2002 & MGTF 2002-2005

Lamps

ILL N° PART N° QTY DESCRIPTION APPLICATION1 084.666 1 LHD RH Headlamp ass. MGF, from V 004353

084.667 1 LHD LH Headlamp ass. MGF, from V 004353284.255 1 LHD RH Headlamp ass. MGF Trophy284.256 1 LHD LH Headlamp ass. MGF Trophy284.253 1 LHD RH Headlamp ass. MGTF284.254 1 LHD LH Headlamp ass. MGTF

2 084.668 1 RH Lens kit Front lamps084.669 1 LH Lens kit Front lamps

3 084.690 4 Bulb, 55W, H1 Front lamps4 084.128 2 Bulb, pilot lamp, 5W Front lamps5 165.238 4 Screw, headlamp to body Front lamps6 122.344 2 Grommet, lower fixing Front lamps7 165.252 2 Screw, headlamp to wing Front lamps8 ....... 2 Clip, headlamp to wing Front lamps9 084.670 1 RH indicator lamp, amber lens To 511058, Front lamps

084.671 1 LH indicator lamp, amber lens To 511058, Front lamps284.257 1 RH indicator lamp, clear lens, amber bulb From 511059 on, Front

lamps284.258 1 LH indicator lamp, clear lens, amber bulb From 511059 on, Front

lamps084.730 1 Pair of clear lenses & amber bulbs Front lamps

10 084.691 2 Socket, director indicator Front lamps11 084.062 2 Bulb, 21W Front lamps12 084.466 2 Side indicator lamp assembly Front lamps13 084.467 2 Socket, bulb holder Front lamps14 084.468 2 Gasket, lens seating Front lamps

ILL N° PART N° QTY DESCRIPTION15 084.128 2 Bulb, 5 W Front lamps16 084.707 1 Pair fog lamps ass. KIT 20 084.695 1 RH Rear lamps assembly MGF

084.696 1 LH Rear lamps assembly MGF284.259 1 RH Rear lamps assembly MGTF284.260 1 LH Rear lamps assembly MGTF

21 084.697 1 RH Bulb holder plate Rear lampss084.698 1 LH Bulb holder plate Rear lamps

22 084.700 2 Gasket, lamp seating Rear lamps23 161.613 6 Nut, lamp fixing Rear lamps24 084.062 6 Bulb 21W , clear Rear lamps25 084.699 2 Bulb 21W , amber Rear lamps26 084.063 2 Bulb 21/5W , clear Rear lamps27 084.701 1 Stop lamp, high mounted MGF, Rear lamps

284.261 1 Stop lamp, high mounted MGTF, Led type, Rear lamps29 165.253 2 Screw Rear lamps30 084.703 2 Lamp, number plate MGF, Rear lamps

284.261 1 Lamp, number plate MGTF, Rear lamps31 084.079 2 Bulb, 5W Rear lamps32 084.692 2 Lamp, underbonnet or loadspace Rear lamps33 084.693 2 Bulb, 10W Rear lamps34 084.694 2 Interior lamp, glovebox or footwell side Rear lamps35 084.079 2 Bulb, 5 W Rear lamps36 084.705 1 Bulb kit, one of each type, well protected in

a plastic box and foam padded. Rear lamps

Page 39: FOR BEST RESULTS DO NOT - Anglo Parts · PDF fileFOR BEST RESULTS DO NOT PRINT THIS PAGE! This page will interfere with the correct page order when printing recto-verso. Quality Parts

36© Van Geste l B&C 2013Quality Par ts & Service

MGF 1996-2002 & MGTF 2002-2005

Windscreen washer & wiper installation

ILL N° PART N° QTY DESCRIPTION APPLICATION1 086.331 1 Washer bottle & cap 2 086.333 1 Cap only 3 086.568 1 Motor, windscreen washer 4 086.567 1 Bush, motor to bottle 5 063.359 A/R Tubing, sold by meter 6 172.811 2 Clip, tubing to body 7 172.810 4 Clip, tubing to bonnet 8 086.571 1 Connector, elbow 9 083.057 1 Valve, non return

10 086.570 1 Tee piece 11 086.569 2 Jet, windscreen washer 12 122.362 2 Gasket for jet 13 082.102 1 Wiper motor 14 165.307 3 Screw, motor fixing 15 136.291 1 LHD Mechanism assembly

ILL N° PART N° QTY DESCRIPTION APPLICATION16 122.361 1 Bush, mounting, rubber 17 165.212 1 Screw, mounting 18 122.359 2 Bush, rubber 19 122.360 2 Washer, rubber 20 163.230 2 Washer, plain 21 161.621 2 Nut, spindle 22 137.214 1 Pivot seal, passenger side only 23 087.070 1 LHD Arm at drivers side ( LH ) 24 087.069 1 LHD Arm at passenger side ( RH ) 25 087.073 1 LHD Wiper blade at drivers side ( LH ) 26 087.074 1 Wiper blade at passenger side 27 161.620 1 Dome nut, wiper arm, drivers side 28 161.619 1 Flat nut, wiper arm, passenger side 29 137.215 1 Cover, passenger side only 30 233.016 1 Repair kit wiper mechanism

Page 40: FOR BEST RESULTS DO NOT - Anglo Parts · PDF fileFOR BEST RESULTS DO NOT PRINT THIS PAGE! This page will interfere with the correct page order when printing recto-verso. Quality Parts

37© Van Geste l B&C 2013 Quality Par ts & Service

MGF 1996-2002 & MGTF 2002-2005

Body parts

ILL N° PART N° QTY DESCRIPTION1 130.127 1 Body shell 2 138.006 1 Dash, upper panel 3 131.816 1 RH Reinforcement valance

131.817 1 LH Reinforcement valance 4 136.274 1 Strut, steering column/floor 5 138.002 1 Bulkhead assembly 6 136.271 1 RH Lamp mounting panel

136.272 1 LH Lamp mounting panel 7 138.003 1 Front section, bulkhead/ spare wheel,

To 522573, not Trophy138.812 1 Bulkhead, MGF late 522574 -

600100 not Trophy8 136.273 1 Bracket, front sidemember 9 137.130 1 RH Bracket, subframe

137.131 1 LH Bracket, subframe 10 138.004 1 Crossmember, lower/front 11 138.005 1 Platform, bonnet locking 12 137.132 1 Strut for platform 13 165.191 4 Screw, bonnet platform strut 14 161.616 2 Nut 15 165.280 4 Screw, bonnet locking 16 163.223 4 Washer 17 136.066 1 RH Valance

136.067 1 LH Valance 18 137.129 1 Strut, spare wheel/dash 19 131.818 1 RH Sidemember assembly

131.819 1 LH Sidemember assembly

ILL N° PART N° QTY DESCRIPTION20 131.820 1 RH Sidemember

131.821 1 LH Sidemember 21 136.068 1 RH Platform, sparewheel side

136.069 1 LH Platform, sparewheel side 22 136.070 1 RH Reinforcement, susp.lower

136.071 1 LH Reinforcement, susp.lower 23 136.269 1 RH Floor closing panel

136.270 1 LH Floor closing panel 24 131.812 1 RH Front wing, outer, MGF

138.818 1 RH Front wing, outer, MGTF131.813 1 LH Front wing, outer, MGF 138.819 1 LH Front wing, outer, MGTF

25 138.023 1 RH front inner wing, MGF 138.820 1 RH front inner wing, MGTF 138.024 1 LH Wheel arch liner, MGF 138.821 1 LH Wheel arch liner, MGTF

26 137.146 2 Strut, wing support 27 165.287 16 Screw, wing fixing 28 172.799 4 Clip, liner to wheel arch 29 161.617 2 Nut, nylon for wheel arch 30 136.286 2 Protection strip, edge 31 138.017 1 Crossmember, front 32 138.016 1 Floor, front 33 138.018 1 Reinforcement panel, floor 34 165.286 22 Screw, reinforcement panel 35 136.281 1 RH Member, front 36 136.282 1 LH Member, front

ILL N° PART N° QTY DESCRIPTION37 138.010 1 RH Outer sill, MGF

138.011 1 LH Outer sill, MGF 38 137.133 1 RH Closing panel, sill

137.134 1 LH Closing panel, sill 39 137.135 1 RH Extension panel

137.136 1 LH Extension panel 40 138.012 1 RH Rear wing assembly, MGF

138.013 1 LH Rear wing assembly, MGF 41 136.277 1 RH ‘A’ Post

136.278 1 LH ‘A’ Post42 138.014 1 RH Closing panel

138.015 1 LH Closing panel 43 136.279 1 RH Wheel arch, rear

136.280 1 LH Wheel arch, rear 44 137.143 1 RH Tonneau closing plate

137.144 1 LH Tonneau closing plate 45 138.019 1 Rear panel, inner & outer 46 138.020 1 Rear panel, outer 47 136.283 1 RH rear lamp mounting 48 136.284 1 LH Rear lamp mounting 49 138.021 1 Reinforcement rail 50 137.145 1 Reinforcement, stricker 51 138.022 1 Rear panel, inner 52 136.285 1 Lid, hoodwell 53 130.248 1 RH body side, MGTF

130.249 1 LH body side, MGTF

Page 41: FOR BEST RESULTS DO NOT - Anglo Parts · PDF fileFOR BEST RESULTS DO NOT PRINT THIS PAGE! This page will interfere with the correct page order when printing recto-verso. Quality Parts

38© Van Geste l B&C 2013Quality Par ts & Service

MGF 1996-2002 & MGTF 2002-2005

Bonnet and boot lid

ILL N° PART N° QTY DESCRIPTION APPLICATION1 131.811 1 Bonnet with hinges 2 137.147 1 RH Bonnet hinge

137.148 1 LH Bonnet hinge 3 137.149 6 Shim, bonnet hinge 4 165.238 8 Scew, bonnet fixing 5 122.350 2 Bonnet buffer 6 134.499 1 Rod, bonnet stay 7 122.351 1 Grommet, bonnet rod 8 172.800 1 Clip, bonnet rod 9 137.150 1 Stricket & catch

10 165.288 2 Screw, stricker & catch 11 137.152 1 Upper plate for bonnet latch 12 137.151 1 Bonnet latch 13 165.148 2 Screw, bonnet latch 14 134.622 1 Cable, bonnet release 15 137.154 1 Bracket, release lever 16 137.153 1 Lever, bonnet release 17 165.166 2 Screw, bracket to bulkhead 18 165.176 1 Screw, lever to bracket 19 172.803 1 Strap, cable tie 20 159.148 1 RH Cover, underbonnet space

159.149 1 LH Cover, underbonnet space 21 134.623 1 Finisher, scuttle panel 22 172.801 6 Clip for finisher panel, 5mm hole 23 122.354 1 Blanking plug, wiper spindle 24 122.352 4 Grommet, plenum-rear 25 161.618 2 Locknut for plenum-rear 26 165.289 6 Screw, scuttle to plenum-rear

ILL N° PART N° QTY DESCRIPTION APPLICATION27 122.353 6 Cap, screw 28 161.603 2 Nut, plastic 29 172.799 1 Clip for underbonnet cover 40 138.027 1 Boot lid MGF

138.823 1 Boot lid MGTF41 137.197 1 RH Hinge, boot lid

137.198 1 LH Hinge, boot lid 42 161.602 6 Nut, hinge 43 165.302 2 Bolt, hinge 44 165.235 4 Bolt, hinge to boot lid 45 122.357 2 Stop buffer, hinge 47 121.477 1 Seal, boot lid 48 121.478 1 Seal, engine trunk lid 49 172.807 2 Clip, boot lid hinge 50 133.421 2 Buffer, boot lid 51 137.200 1 Catch, boot lid 52 165.220 2 Screw, catch 53 137.201 1 Cover, catch 54 137.202 1 Stricker 55 165.301 2 Screw, stricker 56 141.779 1 Lock, boot lid Early cars

141.780 1 Lock, boot lid Late cars, see also LOCK SETS page 40

57 134.632 1 Cable, lock to latch 58 172.808 1 Clip, lock retaining NOT included in n°5659 141.790 1 Badge, boot lid MGF60 172.814 2 Clip, badge retaining

Page 42: FOR BEST RESULTS DO NOT - Anglo Parts · PDF fileFOR BEST RESULTS DO NOT PRINT THIS PAGE! This page will interfere with the correct page order when printing recto-verso. Quality Parts

39© Van Geste l B&C 2013 Quality Par ts & Service

MGF 1996-2002 & MGTF 2002-2005

Doors, door glass and seals

ILL N° PART N° QTY DESCRIPTION APPLICATION1 138.025 1 RH Door assembly

138.026 1 LH Door assembly 2 136.287 1 RH Door skin, outer

136.288 1 LH Door skin, outer 3 137.160 1 RH - LHD Handle To be painted

137.161 1 LH - LHD Handle To be painted4 172.805 2 Clip, lock retaining 5 165.292 4 Screw, handle fixing 6 137.155 1 Hinge, RH upper

137.156 1 Hinge, RH lower 137.157 1 Hinge, LH upper 137.158 1 Hinge, LH lower

7 165.290 20 Bolt, hinge 8 163.228 20 Washer 9 137.159 2 Check strap asembly

10 172.804 2 Pin, check strap 11 165.291 4 Screw, check strap 12 172.802 4 Cap, stud sealing 13 122.355 4 Door buffer, front side 14 137.184 1 RH - LHD Latch assembly

137.185 1 LH - LHD Latch assembly 15 134.624 1 RH Cable

134.625 1 LH Cable 16 137.188 1 RH Button and link

137.189 1 LH Button and link 17 165.293 6 Screw, latch fixing 18 137.194 2 Stricker, door lock 19 165.296 4 Screw, stricker 20 137.192 1 RH Finisher, black

137.193 1 LH Finisher, black

ILL N° PART N° QTY DESCRIPTION APPLICATION21 165.295 2 Screw, finisher fixing 22 141.771 1 RH Handle, interior door release

141.772 1 LH Handle, interior door release 23 165.294 4 Screw, interior handle 24 122.356 4 Plug-inn nut 25 136.289 1 RH Regulator assembly

136.290 1 LH Regulator assembly 26 165.300 4 Screw, regulator 27 165.297 4 Screw, glass holder fixing 28 120.100 1 RH Door glass

120.101 1 LH Door glass 29 137.196 2 Bracket, stop glass lift 30 134.628 1 RH Cheater seal, up to V 007718

134.629 1 LH Cheater seal, up to V 007718 134.630 1 RH Cheater seal, from V 007719 134.631 1 LH Cheater seal, from V 007719

31 165.260 4 Screw, cheater 32 172.806 2 Fastener, cheater 33 165.299 4 Screw, sash to cheater 34 121.473 1 RH Seal, sash

121.474 1 LH Seal, sash 35 134.626 1 RH Door lift assembly

134.627 1 LH Door lift assembly 36 137.195 2 Sleeve, sash adjuster 37 167.254 2 Adjuster screw 38 161.588 4 Nut, lower 39 165.298 2 Screw, glass retention 40 161.586 2 Nut, upper rail 41 121.475 1 Seal, front side 42 121.476 1 Seal, rear side

Page 43: FOR BEST RESULTS DO NOT - Anglo Parts · PDF fileFOR BEST RESULTS DO NOT PRINT THIS PAGE! This page will interfere with the correct page order when printing recto-verso. Quality Parts

40© Van Geste l B&C 2013Quality Par ts & Service

MGF 1996-2002 & MGTF 2002-2005

Body fittings, windscreen and lock set

ILL N° PART N° QTY DESCRIPTION1 120.090 1 Windscreen glass 2 134.633 1 Finisher, windscreen 3 137.203 1 Slug, mirror 4 122.358 2 Support block, glazing 5 165.303 2 Screw 6 141.661 1 MG badge, front MGF7 141.790 1 MG badge, rear MGF

142.520 2 Badge front or rear MGTF8 172.814 2 Clip, rear badge9 141.773 1 Full lock set for LHD cars

10 141.777 1 RH door lock, LHD cars141.775 1 LH door lock, LHD cars

11 134.640 1 RH Door waistrail 134.641 1 LH Door waistrail

12 172.812 10 Clip, waistrail 13 134.642 1 RH Finisher, hoodwell

134.643 1 LH Finisher, hoodwell 14 137.229 1 Joint piece, finishers 15 172.812 12 Clip, Finishers 16 141.788 1 RH Finisher, rear decking

141.789 1 LH Finisher, rear decking 122.363 2 Seal for finisher

17 165.317 4 Screw, finisher fixing 18 134.644 2 Protector strip, wheel arch 19 136.295 1 RH Liner, wheelarch

136.296 1 LH Liner, wheelarch 20 165.320 2 Screw, liner fixing 21 172.813 2 Clip 22 233.417 1 RH Intake bezel MGF

233.418 1 LH Intake bezel MGF185.655 1 Pair chrome bezels MGF232.880 1 RH Intake bezel MGTF232.881 1 LH Intake bezel MGTF232.882 1 RH Intake bezel Trophy232.883 1 LH Intake bezel Trophy

ILL N° PART N° QTY DESCRIPTION23 165.318 4 Screw, bezel 24 137.242 1 RH Retainer, bezel MGF

137.243 1 LH Retainer, bezel MGF232.884 1 RH Retainer, bezel MGTF232.885 1 LH Retainer, bezel MGTF

25 172.813 4 Clip 26 165.319 6 Screw 27 161.617 6 Nut, clip 28 137.244 1 RH Air duct MGF

137.245 1 LH Air duct MGF232.886 1 RH Air duct MGTF232.887 1 LH Air duct MGTF

30 122.375 1 Block, cable pass, tunnel 31 122.364 2 Grommet, main floor 32 122.371 12 Grommet, floor 33 122.372 6 Grommet, sill closing 34 122.368 1 Grommet, bulkhead, 50 dia 35 122.365 2 Grommet, floor 36 122.369 2 Grommet, inner sill 37 122.366 2 Grommet, support, spare wheel 38 122.377 1 Cover, sensor unit 39 165.321 4 Screw 40 122.370 4 Grommet, ‘A’ Post & dash 41 122.373 3 Grommet, Bulkhead-spare wheel 42 122.367 2 Grommet, inner sill

Page 44: FOR BEST RESULTS DO NOT - Anglo Parts · PDF fileFOR BEST RESULTS DO NOT PRINT THIS PAGE! This page will interfere with the correct page order when printing recto-verso. Quality Parts

41© Van Geste l B&C 2013 Quality Par ts & Service

MGF 1996-2002 & MGTF 2002-2005

Bumpers & mirrors

ILL N° PART N° QTY DESCRIPTION APPLICATION1 131.814 1 Front bumper, primed Front bumper, MGF

138.813 1 Bumper spoiler Front bumper, Trophy only138.815 1 Front bumper cover Front bumper, MGTF

2 131.815 1 Armature, front bumper Front bumper, MGF234.559 1 Armature, front bumper Front bumper, MGTF

3 165.189 4 Bolt, armature fixing Front bumper4 165.312 9 Screw, bumper to wing Front bumper5 172.436 9 Nut, clip Front bumper6 165.312 5 Screw, bumper to platform Front bumper7 165.313 2 Bolt, bumper to armature Front bumper8 163.232 2 Washer, plain Front bumper9 136.326 1 Grill kit, 2 pieces Front bumper

232.874 1 Black lower grill Front bumper, MGTF232.875 1 Silver lower grill Front bumper, MGTF

11 165.311 15 Screw, grill fixing Front bumper12 136.293 1 Air dam plate Front bumper13 137.225 1 Bracket, air dam plate Front bumper14 165.300 3 Screw, air dam plate to bracket Front bumper15 161.586 3 Nut Front bumper16 165.204 2 Screw, bracket to sub frame Front bumper17 163.233 2 Washer Front bumper18 161.591 2 Nut Front bumper

ILL N° PART N° QTY DESCRIPTION APPLICATION30 138.028 1 Rear bumper, primed Rear bumper, MGF

138.816 1 Rear bumper cover Rear bumper, MGTF to 622375138.817 1 Rear bumper cover Rear bumper, MGTF 622375-on138.822 1 Bumper spoiler Rear bumper, MGTF

31 137.226 1 RH Mounting bracket Rear bumper32 137.227 1 LH Mounting bracket Rear bumper33 165.314 8 Bolt, mounting bracket Rear bumper34 136.294 2 Spacer, side Rear bumper35 165.312 2 Screw Rear bumper36 172.436 2 Clip-nut Rear bumper37 161.588 3 Nut, bumper to body, rear Rear bumper38 165.313 2 Screw, bumper to scrash pan Rear bumper39 163.232 2 Washer Rear bumper40 165.316 2 Screw for number plate Rear bumper41 232.876 1 Black rear grill Rear bumper, MGTF

232.877 1 Silver rear grill Rear bumper, MGTF50 137.224 1 Interior mirror Mirror51 232.888 2 Door mirror, manual

232.889 2 Door mirror, electrical52 137.222 2 Spare glass 53 137.213 2 Knob, lever 54 165.310 4 Screw, mirror fixing 55 137.223 4 Cap, screw cover 56 185.654 1 Pair chrome mirror covers

Page 45: FOR BEST RESULTS DO NOT - Anglo Parts · PDF fileFOR BEST RESULTS DO NOT PRINT THIS PAGE! This page will interfere with the correct page order when printing recto-verso. Quality Parts

42© Van Geste l B&C 2013Quality Par ts & Service

MGF 1996-2002 & MGTF 2002-2005

Soft top and hard top

ILL N° PART N° QTY DESCRIPTION APPLICATION1 153.601 1 Soft top, black - 4 sections

Other colours available on requestSoft hood top, 1996-’98

2 153.819 1 Soft top, black - 2 sectionOther colours available on request

Soft hood top, 1998-on

3 153.602 1 Backlight, plastic Soft hood top6 137.207 2 Tension cable Soft hood top8 155.043 1 Folding frame Soft hood top 1996-’989 137.204 2 Link assembly Soft hood top

11 134.637 1 Insert for front header rail Soft hood top12 121.479 1 RH Cantrail seal, black Soft hood top

121.480 1 LH Cantrail seal, black Soft hood top13 121.481 1 RH ‘B’ post seal Soft hood top

121.482 1 LH ‘B’ post seal Soft hood top14 ....... 1 Strip, rear Soft hood top15 134.635 1 Extrusion, rear bow Soft hood top16 134.634 1 Insert, rear bow Soft hood top17 141.781 1 RH Catch, header rail Soft hood top

141.782 1 LH Catch, header rail Soft hood top18 165.305 4 Screw for catch Soft hood top19 141.783 1 RH Stricker Soft hood top

141.784 1 LH Stricker Soft hood top20 165.305 4 Screw, stricker Soft hood top21 137.209 1 RH ‘B’ post plate Soft hood top

137.210 1 LH ‘B’ post plate Soft hood top22 165.278 4 Screw Soft hood top

ILL N° PART N° QTY DESCRIPTION APPLICATION23 141.785 5 Catch, rear hood well, use spacer 137.208 Soft hood top, up to V 006145

137.208 5 Spacer Soft hood top, up to V 006145141.786 5 Catch, rear hood well Soft hood top, from V 006146 on

24 152.171 10 Rivet Soft hood top25 159.276 1 Hood roll cover, black

Other colours available on requestSoft hood top

26 152.174 2 Stud, fastener Soft hood top27 152.173 2 Rivet Soft hood top30 130.128 1 Hard top assembly, black Hard top ( original model )31 120.102 1 Glass, backlight Hard top ( original model )32 134.638 1 Seal, backlight Hard top ( original model )33 080.298 1 Harness, extension Hard top ( original model )34 137.212 2 Spacer block Hard top ( original model )36 121.484 1 Seal, rear decking Hard top ( original model )37 121.485 1 Seal, RH side Hard top ( original model )38 121.486 1 Seal, LH side Hard top ( original model )39 134.639 1 Finisher strip, lower edge Hard top ( original model )40 137.211 2 End cap, finisher strip Hard top ( original model )41 159.153 1 Headlining Hard top ( original model )42 172.809 2 Clip, headlining Hard top ( original model )45 141.781 1 RH Catch assembly Hard top ( original model )

141.782 1 LH Catch assembly Hard top ( original model )46 165.306 6 Screw Hard top ( original model )47 137.209 1 RH Plate, ‘B’ post Hard top ( original model )

137.210 1 LH Plate, ‘B’ post Hard top ( original model )48 141.787 2 Catch, ‘B’ post Hard top ( original model )

For more hard-tops, see page 48: Roll-over bar, hard-tops and luggage racks

Page 46: FOR BEST RESULTS DO NOT - Anglo Parts · PDF fileFOR BEST RESULTS DO NOT PRINT THIS PAGE! This page will interfere with the correct page order when printing recto-verso. Quality Parts

43© Van Geste l B&C 2013 Quality Par ts & Service

MGF 1996-2002 & MGTF 2002-2005

Fascia and fittings

ILL N° PART N° QTY DESCRIPTION APPLICATION1 151.799 1 LHD Fascia panel, ash grey 2 159.154 1 LHD Instrument bezel, black 3 165.322 2 Screw, lower

165.323 2 Screw, upper 4 159.156 1 LHD Lid, fuse box, ash grey 5 085.342 1 LHD Lable, fusebox 6 165.267 2 Tapping screw 7 161.430 2 Nut, clip 8 165.324 2 Insert stud 9 163.234 2 Washer, rubber

10 137.246 2 Anchor for stud 11 137.247 2 Retaining washer 12 137.248 1 Bracket, centre support 13 161.623 1 Adjustable nut 14 165.165 4 Screw, fascia to front end 15 161.622 4 Clip, nut 16 161.624 27 Nut & washer assembly 17 165.267 3 Screw, tapping 18 161.625 9 Captive nut 19 137.250 1 RH Bracket

137.249 1 LH Bracket 20 137.252 2 RH Support bracket

137.251 2 LH Support bracket 21 122.378 4 Plug, cover 22 159.174 1 Module ass. airbag, ash grey 23 165.332 2 Screw, kleerlock

ILL N° PART N° QTY DESCRIPTION APPLICATION24 161.624 4 Nut 25 137.254 1 Bracket 26 165.325 1 Screw for bracket 27 159.158 1 Cover, airbag aperture, when NO airbag is fitted 28 172.016 2 Clip 29 159.159 1 Glovebox, ash grey ( NON AIRCO cars )

159.160 1 LHD Glovebox, ash grey, airco cars 30 165.322 2 Special screw, glovebox/fascia 31 122.380 2 Plug 32 137.255 1 Stricker 33 165.267 2 Screw 34 161.626 2 Nut, clip 35 141.791 1 Latch less lock 36 165.326 1 Screw, latch 37 141.792 1 Lock, barrel ‘G’

141.793 1 Lock, barrel ‘GH’ 38 063.360 2 Bezel, desmister 39 122.379 2 Seal 40 063.361 1 RH Duct, desmist windscreen

063.362 1 LH Duct, desmist windscreen 41 063.363 1 Central vent outlet 42 063.364 1 RH Vent outlet

063.365 1 LH Vent outlet 43 172.815 4 Clip, finisher 44 137.253 1 Frame, airbag support

Page 47: FOR BEST RESULTS DO NOT - Anglo Parts · PDF fileFOR BEST RESULTS DO NOT PRINT THIS PAGE! This page will interfere with the correct page order when printing recto-verso. Quality Parts

44© Van Geste l B&C 2013Quality Par ts & Service

MGF 1996-2002 & MGTF 2002-2005

Tunnel conzoll and fittings

ILL N° PART N° QTY DESCRIPTION APPLICATION1 159.178 1 Base assembly, conzoll, ash grey colour 2 159.185 1 Housing for switches, black For other styles and

materials, please look at accessories.

3 086.527 1 Blank, switch 4 137.283 1 Blank, radio 5 137.279 1 Panel, switches Airco

137.280 1 Panel, switches Non airco6 172.828 5 Clip, switch housing

172.829 2 Clip, instrument housing 7 137.278 2 Mounting bracket 8 161.623 6 Nut, insert 9 165.312 4 Screw

10 137.276 1 RH Side panel, ash grey 137.277 1 LH Side panel, ash grey

11 165.263 4 Screw 12 141.796 1 Ashtray 13 159.186 1 Gaiter, manual gear lever, ash grey See also accessories14 137.282 1 Retaining rim, black 15 165.338 2 Screw 16 159.184 1 Handbrake gaiter 17 137.274 1 Stowage bin

ILL N° PART N° QTY DESCRIPTION APPLICATION18 137.275 1 Finisher plate, stowage bin 19 165.337 2 Screw 20 159.182 1 Base, stowage bin 21 172.827 2 Nut, bin to hoodwell 22 152.070 2 Catch 23 165.322 2 Screw, base to hoodwell 24 172.826 2 Clip 25 159.181 1 Lid, rear, ash grey 26 159.180 1 Lid, front, ash grey 27 172.824 2 Latch/clip 28 137.272 1 Hinge 29 165.335 12 Screw, lid 30 165.336 2 Screw, lid to console 31 151.812 1 Finisher, rear bulkhead, ash grey 32 137.284 2 Escutcheon 33 122.381 3 Clip 34 165.339 3 Screw, fastener 35 152.174 3 Fastener 36 152.177 6 Clip-snap 37 152.178 6 Insert press 38 152.179 6 Fastener

Page 48: FOR BEST RESULTS DO NOT - Anglo Parts · PDF fileFOR BEST RESULTS DO NOT PRINT THIS PAGE! This page will interfere with the correct page order when printing recto-verso. Quality Parts

45© Van Geste l B&C 2013 Quality Par ts & Service

MGF 1996-2002 & MGTF 2002-2005

Interior trim, panels and carpets

ILL N° PART N° QTY DESCRIPTION APPLICATION1 151.816 1 Insulation pad, bulkhead-front 2 151.817 1 Insulation pad, bulkhead-rear 3 151.813 1 Insulation pad, RH footwell

151.814 1 Insulation pad, LH footwell 4 151.815 2 Insulation pad, rear floor 5 152.182 17 Clip, female 6 152.183 9 Clip, male, insulation rear bulkhead

152.184 8 Clip, male, insulationfront bulkhead 8 172.822 10 Fastener, carpet 9 134.646 2 Plate, sill, bright finish

10 134.647 2 Plate, black finish 11 165.333 6 Screw 12 137.268 1 Footrest, front 13 165.162 3 Screw, footrest 14 137.269 1 RH ‘B’ Post finisher

137.270 1 LH ‘B’ Post finisher 15 137.241 2 Patch, tape , to V 000752 16 152.175 4 Rivet 17 141.794 1 RH Seal finisher

141.795 1 LH Seal finisher 18 172.801 2 Fastener for finisher 19 159.162 1 RH ‘A’ Post finisher

159.163 1 LH ‘A’ Post finisher 20 172.821 6 Clip, ‘A’ post 21 134.645 1 Header finisher rail 22 172.821 5 Clip, header finisher 23 159.164 1 LHD Sunvisor, passenger side

ILL N° PART N° QTY DESCRIPTION APPLICATION24 159.165 1 LHD Sunvivor, drivers side 25 165.328 4 Screw, sunvisor 26 151.801 1 RH Door panel, ash & green pod

151.802 1 LH Door panel, ash & green pod 151.803 1 RH Door panel, ash & red pod 151.804 1 LH Door panel, ash & red pod

27 172.819 12 Clip into door 28 172.820 12 Fastener, door panel 29 165.253 2 Grommet for screw 30 172.818 2 Grommet, sill button 31 137.260 4 Grommet 32 137.256 1 RH Door pull

137.257 1 LH Door pull 33 165.267 4 Screw for door pull 34 137.258 1 RH Bracket, door pull

137.259 1 LH Bracket, door pull 35 122.356 4 Grommet/nut 36 165.327 4 Screw for bracket 37 159.215 2 Door pod: Black leather

159.216 2 Door pod: Red leather159.217 2 Door pod: British racing green leather159.218 2 Door pod: Light grey leather159.258 2 Door pod: Dark grey leather159.220 2 Door pod: Light stone beige leather159.221 2 Door pod: Biscuit leather159.222 2 Door pod: Cream leather

Page 49: FOR BEST RESULTS DO NOT - Anglo Parts · PDF fileFOR BEST RESULTS DO NOT PRINT THIS PAGE! This page will interfere with the correct page order when printing recto-verso. Quality Parts

46© Van Geste l B&C 2013Quality Par ts & Service

MGF 1996-2002 & MGTF 2002-2005

Engine bay, boot trim and seat covers

ILL N° PART N° QTY DESCRIPTION APPLICATION1 151.825 1 Guard, engine apererture 2 159.189 1 RH Cover 3 159.190 1 LH Cover 4 134.648 1 Guard frame 5 165.341 11 Screw 6 134.649 1 Bracket for rear panel 7 165.191 4 Screw, bracket 8 151.826 1 Seal, passenger bulkhead 9 151.809 1 Carpet, hoodwell - black

10 151.822 1 Insulation, hoodwell 121.488 1 Seal, hoodwell

11 151.810 1 Carpet, boot panel - black 12 151.820 1 Insulation, engine bay 13 151.811 1 Carpet, boot rear - ash grey 14 172.822 8 Fastener, carpet 15 172.802 8 Anchor stud 16 159.175 1 Net, stowage 17 159.177 1 Strap, retention 18 159.176 2 Rod, retention 19 185.541 2 Seatbelt, long end - ash grey 20 185.544 1 RH Short end - ash grey

185.543 1 LH Short end - ash grey 21 136.297 1 RH Squab frame

136.298 1 LH Squab frame 22 136.299 1 RH Cushion frame

136.300 1 LH Cushion frame

ILL N° PART N° QTY DESCRIPTION APPLICATION23 165.329 8 Screw, squab to cushion 24 165.330 8 Screw, frame to floor 25 137.263 1 RH Finisher - ash grey

137.264 1 LH Finisher - ash grey 26 137.265 2 Handwheel - ash grey 27 137.266 2 Cap - ash grey 28 137.261 4 Headrest locking 29 137.262 4 Cap, finisher - ash grey 30 157.066 2 Foam, squab top & side 31 157.067 2 Foam, squab centre piece 32 157.068 2 Cushion foam

Trim listed below is original specification33 156.388 2 Squab cover, green & black cloth Original specification

156.389 2 Cushion cover, green & black cloth Original specification 156.390 2 Squab cover, red & red cloth Original specification 156.391 2 Cushion cover, red & red cloth Original specification 156.392 2 Squab cover, black leather & green Original specification 156.393 2 Cushion cover, black leather & green Original specification 156.394 2 Squab cover, red leather & red Original specification 156.395 2 Cushion cover, red leather & red Original specification

34 159.170 2 Headrest ass., green & black cloth Original specification 159.171 2 Headrest ass., red & red, cloth Original specification 159.172 2 Headrest ass., green & black leather Original specification 159.173 2 Headrest ass., red & red leather Original specification

For more seat covers, see page 50:

Leather exchange seats

Page 50: FOR BEST RESULTS DO NOT - Anglo Parts · PDF fileFOR BEST RESULTS DO NOT PRINT THIS PAGE! This page will interfere with the correct page order when printing recto-verso. Quality Parts

47© Van Geste l B&C 2013 Quality Par ts & Service

MGF 1996-2002 & MGTF 2002-2005

Engine, exhaust and suspension improvements

Pair Kent CamsMade from new blank camshafts.

Kent camshafts are high lift, high torque, wide power band with phenomenal mid-range and top end power. For fast road

& sports Kent offers the following specifications : power band 2000-6000, cam lift in/ex. 278°,

timing figures 29/69 69/29, inlet timing full lift 110°, valve clearance in/ex. 0.00mm

Pair adjustable vernier pulleysMade by KENT for precision timing

Part n°

013.574

Re-usable air filterA K&N re-usable filter is the world’s best performer in air flow filtering.Unlike other filters you use and throw away, a K&N filter is re-usable for the life of your engine. A K&N re-usable filter element carries a warranty for one million miles or ten years of non-competition use.

Shock absorber

These Spax adjustable gas shock absorbers are a great

improvement on the standards shocks. Tune the shock absorber for a harder or softer drive.

Each shock has its own adjusting knob.

Part n°

012.734

Part n°

101.909

GRAN TURISMOMGF central outlet style

BIG BORE MGF super sport system

Part n° Description110.289 MKI ( to VIN 522752 )110.396 MKII ( from VIN 522753 )

These performance exhausts systems improves the power, gives an evocative sound and an adorable look. Made from high quality grade stainless steel

Part n°

042.791

Catalyst pipe by-passFull stainless steel Reduces back pressure, enhances horsepower and torque

Part n°

110.298

Part n° Description110.284 MKI ( to VIN 522752 )110.395 MKII ( from VIN 522753 )

Suplex Hydragas conversion kit

Part n°

045.480

This Suplex Hydragas Conversion Kit is a mechanical spring system designed to replicate the action of the MG Rover hydragas linked suspension system. No special tools required to fit.Kit contents: • 2 front conversion units • 2 rear conversion units • 2 front dampers • 2 rear dampers • Comprehensive and detailed fitting instructions

Page 51: FOR BEST RESULTS DO NOT - Anglo Parts · PDF fileFOR BEST RESULTS DO NOT PRINT THIS PAGE! This page will interfere with the correct page order when printing recto-verso. Quality Parts

48© Van Geste l B&C 2013Quality Par ts & Service

MGF 1996-2002 & MGTF 2002-2005

Roll-over bar, hard-tops and luggage racks

Stylish twin hoop chrome finished roll-over bar. For MGF’s from 1995 up to 1999Besides being stylish, these twin hoop roll-over bars will protect you in a rolling accident. You can still raise and lower the hood as easily as before.

Part n°

138.037

MGF & TF hard-topsImproved design

Hard-Tops

During the design and manufacturing process of our new MGF-TF Hardtop, the prime objective was to give you the customer an ideal combination, of being both, aesthetically pleasing and ergonomic.

In the past hardtops tendered to suffer from a lack of imaginative styling, excessive noise and poor water management. These problems have now been overcome. Unlike the original equipment manufactures hardtop which has an inner and outer shell, this hardtop is a single shell construction with an inner cloth lining.

Classic style luggage rack Made in the traditional way, similar to the factory optional luggage racks as made in the 50’s and 60’s for MGA and MGB.

• Fully installed with ALL original catches and fittings • Heated rear windscreen with socket to fit existing loom• Full grey cloth roof lining• Sculptured rain channel for positive water management• Technically advanced manufacturing process assures precision fitting on windscreen, thus reducing wind noise.

Universal lightweight luggage rack British made and finished with solid wooden slats.

This is the perfect luggage rack for the very few occasions you need that extra carrier. No fixing holes have to be made, clamps direct on the bootlid.

Part n°

140.373

Part n°

140.066

Part n°

130.153

Page 52: FOR BEST RESULTS DO NOT - Anglo Parts · PDF fileFOR BEST RESULTS DO NOT PRINT THIS PAGE! This page will interfere with the correct page order when printing recto-verso. Quality Parts

49© Van Geste l B&C 2013 Quality Par ts & Service

MGF 1996-2002 & MGTF 2002-2005

Trim accessories

Leather handbrake & gearknob gaiter kitsPut that luxery feel of real Scottish leather in your MGF or TF and start with a couple of handcrafted gaiters. Colours have been chosen to match either our seats and door pods or those of the MG Factory optional items. The gaiters have a special wire fitted to the gear lever gaiter and a special plastic finisher on the handbrake lever gaiter. Each kit comes with detailed fitting instructions.

Pair leather arm rests

No more sore elbows, fit our inexpensive foam padded leather armrests, MGF & TF.

Pads are Ash grey to match the door panel colour. Part number for one pair

Part n°

185.531

Black leather gear knobMGF & TF

Pair door pockets Lack of space ? These pretty door panel pockets give you that extra needed storage space, MGF & TF. Using Ash Grey material to match the original door panel this fibreboard backed elasticated pocket is made to adhere to the carpet on the door panel and then finally secured by two self tapping screws with plastic caps. Fitting instructions come with each pair of pockets. Approx fitting time 5 minutes.

Part n°

159.223

Alloy dash kit

This quality after-market kit contains a dash panel and a set of three air

vent bezels. Nicely finished with stick-on alloy. Sold as a kit for 1 car.

Part n°

159.224

Pair sill platesMGF & TF

Part n°

185.594

Part n° Description142.668 RH door handle142.669 LH door handle

Part n° Description159.250 Black leather gaiter kit 159.251 Red leather gaiter kit 159.256 Biscuit leather gaiter kit 159.257 Cream leather gaiter kit

Door handlesFinished in chrome and primer, MGF & TF. To be painted in the colour of your choice. Sold seperately.

Part n° Description159.287 MGF Mk1 alloy dash, illustrated159.836 MGF Mk2 & TF alloy dash, 1999-on

Page 53: FOR BEST RESULTS DO NOT - Anglo Parts · PDF fileFOR BEST RESULTS DO NOT PRINT THIS PAGE! This page will interfere with the correct page order when printing recto-verso. Quality Parts

50© Van Geste l B&C 2013Quality Par ts & Service

Leather exchange seats for MGF & TF Our Leather exchange seats are produced to the exact specifications of each customer. You can choose the colour of the high quality Scottish leather and the colour of piping. Seats come completely finished including head rests and fitting instructions. To match the seats, we also offer

door panel inserts,”door pods”, covered in high quality Scottish leather. Again these door pods come with full fitting instructions.There are two styles of exchange seats available: Classic style and Icon style.

Here below you will find the colour examples available.

MGF 1996-2002 & MGTF 2002-2005

Leather exchange seats

Classic style leather exchange seats MGF & TF

Icon style leather exchange seatsMGF & TF

‘TORX’ key set A T50 key is needed to remove the seats. This set comprises keys sizes: T25, T30, T40, T45, T50 and T55.

Leather door pods MGF MKIPart n° Description Icon style

159.215 Black leather 159.217 British racing green leather 159.220 Light stone beige leather 159.222 Cream leather

Part n°

200.798

Part n° MGF & MGF TF158.234 Classic style leather

echange seats: black with black piping.Other colours available on request.

Part n° MGF & MGF TF158.260 Icon style leather

echange seats: black with black piping.Other colours available on request.

Seats are produced to the exact colour specifications of each customer.

Seats are produced to the exact colour specifications of each customer. Seen here : Biscuit Icon seats with green piping

Seen here : Red Classic seats with black piping

Available colours for MGF & MG TF carpet setsNote: Black is the standard colour supplied. Other colours are available on request. Cream Biscuit Red British racing green Black

Page 54: FOR BEST RESULTS DO NOT - Anglo Parts · PDF fileFOR BEST RESULTS DO NOT PRINT THIS PAGE! This page will interfere with the correct page order when printing recto-verso. Quality Parts

51© Van Geste l B&C 2013 Quality Par ts & Service

MGF 1996-2002 & MGTF 2002-2005

Foot mats, carpet sets and trim finishing

Carpet sets MGF 1995-2003 (LHD only)Our carpet sets are moulded to ensure a perfect fit. Each set consists of 2 main floor carpets and a matching rear bulkhead carpet piece. MGF cars of this period had seperate insulation under the moulded footwells. Please check that this is not damaged before fitting a new carpet set. We can also supply this insulation kit if needed. Footwell overmats are not included, but can be ordered seperately. Each kit has detailed pictorial fitting instructions and it takes approx 3 hours to fit the carpets.

Part n° MGF 1995-2002 carpet sets151.838 MGF black moulded 3 piece carpet set,

Other colours available on request.251.371 Seperate insulation kit

Black footwell overmats

With MG logo and special

clips for fastening the mats

to your existing carpet (LHD only).

Part n°

151.794

Also available black bulkhead carpetWe also offer the rear bulkead carpet located behind the seats. This bulhead carpet piece will make your carpet set complete.

Does your MGF MKI T-bar need replacingor do you want it to complement the colour of your seats? Then, you will find what you need here.

To complete your cockpit we supply leather covered T-bar’s on an exchange basis to match

your leather seats. Anglo Parts offers a modified and padded leather covered cubby box lid

(upper lid). Our cubby box lid is designed to hold cups and cans securely. The lower box lid or centre armrest

is also covered in leather to make the finest leather centre console area in your favorite colour specially for you.

Carpet sets MG TF 2002-2005 After chassis nr. D4 620549 (LHD only)Our carpet sets are moulded to ensure a perfect fit. For MG TF models, After chassis nr. D4 620549.MG TF cars of this period had a white foam insulation backing on the carpets, check to see if yours does, to determine the type of carpet set you will need. Each set consists of 2 main floor carpets with the necessary floor insulation parts and a matching rear bulkhead carpet piece. Footwell overmats not included, but can be ordered seperately. Each kit has detailed pictorial fitting instructions and it takes approx 3 hours to fit the carpets.

Part n° MG TF 2002-2005 carpet sets251.372 MGF TF black moulded 3 piece carpet set,

Other colours available on request.

Part n°

151.853

MGF MKI T-Bar, Cubby Box Lid & Centre Armrest

Available colours for MGF & MG TF carpet setsNote: Black is the standard colour supplied. Other colours are available on request.

Available colours below Note: Black is the standard colour supplied.

Other colours are available on request.

Part n° ‘T’ Bar, Cubby box lid & Arm rest151.856 Black leather covered T-bar, exchange basis159.235 Black leather covered Cubby box lid159.225 Black leather covered arm rest

Cream Biscuit Red British racing green Black

Cream Biscuit Red British racing green Black

Page 55: FOR BEST RESULTS DO NOT - Anglo Parts · PDF fileFOR BEST RESULTS DO NOT PRINT THIS PAGE! This page will interfere with the correct page order when printing recto-verso. Quality Parts

52© Van Geste l B&C 2013Quality Par ts & Service

MGF 1996-2002 & MGTF 2002-2005

Foots mats, mud flaps, and external body styling

Heavy duty rubber mats

‘MG’ Branded rubber mats are easy to clean,

durable and tailored for a perfect fit,

MGF & TF. Sold in pairs

MGF Chrome air intake trim these stylish chrome air intakes look great on your MGF.

Sold in pairs.

Part n°

151.795 MGF MudflapsOur moulded mudfaps are sold in pairs

and have an embossed MG logo. These flaps are efficency designed

and give a perfect fit.

Part n° Description185.528 Pair front mudflaps185.529 Pair rear mudflaps

Chrome mirror covers These beautiful covers are simple to fit and look stunning.For MGF & TF. Sold in pairs.

Part n°

185.654Part n°

185.655

Part n° Description136.326 2 piece radiator grill mesh kit136.339 2 piece air intake mesh kit

Full fitting instructions come with each kit.

Polished stainless steel MGF grill kits These grill kits change the look of your MGF entirely. A kit includes two pieces of highly polished stainless steel mesh to replace the standard mesh in the front bumper as well as two pieces of highly polished stainless steel mesh for the air intake ducts.

Page 56: FOR BEST RESULTS DO NOT - Anglo Parts · PDF fileFOR BEST RESULTS DO NOT PRINT THIS PAGE! This page will interfere with the correct page order when printing recto-verso. Quality Parts

53© Van Geste l B&C 2013 Quality Par ts & Service

MGF 1996-2002 & MGTF 2002-2005

Weather and storage equipment

Hood roll cover (made from vinyl)Change your standard MGF & TF hood roll cover to this better version. We offer the improved design hood roll cover that is secured at the rear at the boot lid. Colours match our seats and cockpit trim.

Hard top storage rack

This hard top storage rack comprises of two strong

brackets that are designed to fit onto a wall.

Stores the hard top safety and without taking up too much place.

Part n°

136.338 Wind shields Two versions are available and both of them really work,

whether you are cruising around town or driving at high speed.

Part n°

151.850Black frame

and meshAll MGF & TF

Part n°

151.781

Clear plexiAll MGF & TF

Part n°

159.359

Part n°

159.323

Part n° Colour description159.276 Black vinyl cover159.277 Red vinyl cover159.284 Biscuit vinyl cover159.285 Cream vinyl cover

Car covers We offer 2 types of car covers: 1 indoor & 1 in-outdoor. Both will fit All MGF’s & TF’s.

Supertex indoor car cover Supertex car covers are made from strong lightweight breathable material. The inside has an extra soft coating to protect the bodywork from scratches. Comes in a handy stowage bag, two elastics keep the cover securely in its place.

Moltex in-outdoor car cover Moltex car covers are made from strong lightweight breathable waterproof material. Whether you are looking for an in-door car cover, or a way to keep the sun off your car during the day, or an all season outdoor car cover, a Moltex car cover is the best solution. These universal car covers come with a stowage bag and two elasticated ropes with four hooks to keep the cover securely in place. Make sure the cover doesn’t move in the wind and use additional ropes or elastics to avoid the car cover making matt areas through friction!

Moltex in-outdoor car cover specifications• Superior water resistance • Protects from dust• Protects from pollution • Keeps interior cooler• Protects from bird & tree droppings • Elasticized edge for snug fit• Light and easy to use • Washable by hand and by machine (+40°)

Page 57: FOR BEST RESULTS DO NOT - Anglo Parts · PDF fileFOR BEST RESULTS DO NOT PRINT THIS PAGE! This page will interfere with the correct page order when printing recto-verso. Quality Parts

54© Van Geste l B&C 2013Quality Par ts & Service

MGF 1996-2002 & MGTF 2002-2005

Wheels and accessories

6 spoke 16” alloy

wheel

16 spoke 16” alloy

wheel

Tyre valve capnickel plated (sold per piece)

Part nr.

046.123

Part nr.

046.124

Tyre gaugeSolid brass precision geared

movement and a bronze bourdon tube are features which produce long-lived accuracy in these superb gauges.

Unlike many other tyre gauges, these bourdon tube movements are not affected by changes in temperature,

humidity, or altitude. The pushbotton allows you to bleed air to the desired pressure and the gauge needle will hold its

reading until released.

Part n°

200.799

Part n°

185.369

Part n°

161.476

Tyre valve capsThese MG branded caps are made from solid brass and are chrome plated. Come in sets of 4.

Bump stop kit 16” Wheels should be fitted with

ultra low profile uni-directional tyres.These high speed sport tyres are rated up to 240 Kph.

For precise suspension control, a bump stop kit must be

fitted with four 16” wheels.

Part n°

042.792

Centre cap For both alloy wheels shown hereSize: inner hole 45 mm • badge size: 54 mm

Part n°

085.341

Page 58: FOR BEST RESULTS DO NOT - Anglo Parts · PDF fileFOR BEST RESULTS DO NOT PRINT THIS PAGE! This page will interfere with the correct page order when printing recto-verso. Quality Parts

55© Van Geste l B&C 2013 Quality Par ts & Service

MGF 1996-2002 & MGTF 2002-2005

MG and Union Jack accessories

UmbrellaThis quality umbrella comes in a classy colour combination of brown and cream with MG crest and a wooden handle.

Part n°

185.076

“BMC”rosette “MG”

‘MG’ badge on tie clip

Finely gold plated with jewellers enamel

Part n°

185.189

‘MG’ Patch

Part n°

185.188 ‘MG’ on pinFine chrome with jewellers enamel

Part n°

085.122

‘MG’ Sticker

Union Jack patch

Union Jack on pinFine chrome & jewellers enamel

Union Jack badgeQuality chrome with jewellers enamel.

A masterpiece for your car.

Magnetic Union JackFor your car or as decoration & souvenir.measurements: 90 x 55 mm

Key fobs

Part n°

185.174

Part n°

185.002Part n°

185.210

Part n°

085.149

Part n°

185.196

‘MG’ parking only320 x 480 mm

Part n°

185.211Part n°

185.006

“Union Jack”

Part n° Description185.295 Brown & cream185.173 Red & black

Union Jack flag 70 X 100 cm

Part n°

185.199

Union Jack desk dressing flag

Part n°

185.709

Part n°

185.219

Union Jack stickerFor your car or as decoration & souvenir.

measurements: 73 x 43 mm

Part n°

085.157

Part n° Description162.405 Screw for UJ badge161.054 Nut for UJ badge

Page 59: FOR BEST RESULTS DO NOT - Anglo Parts · PDF fileFOR BEST RESULTS DO NOT PRINT THIS PAGE! This page will interfere with the correct page order when printing recto-verso. Quality Parts

56© Van Geste l B&C 2013Quality Par ts & Service

MGF 1996-2002 & MGTF 2002-2005

Drivers accessories

Description Part N°Small 185.315Medium 185.316Large 185.317Xtra-large 185.318

DENTS GLOVES since 1777 Today, as in the past, Dents gloves are still handmade in the

traditional manner using the finest materials. (made in England)

Description Part N°Small 185.319Medium 185.320Large 185.321Xtra-Large 185.322

Pittards black leather

Pittards leather palm, Crochet in Cork colour

Picnic blanketPicnic Blanket in tartan, fastened to an nylon groundsheet. (this item may be different from illustration)

Lambswool scarves

Part n°

185.314

Part n°

185.301

Adjustable capWith MG logo embroided.

Part n° Description185.305 Green tartan185.306 Blue tartan185.307 Cream white

High quality driving glovesDrive in great style with these gloves, made using the finest craftsmen and materials.

SLS Black leather gloves

Monte Carlo gloves

Beaulieu gloves

Description Part N°Small 185.821Medium 185.822Large 185.823Xtra-large 185.824

Description Part N°Small 185.811Medium 185.812Large 185.813Xtra-large 185.814

Description Part N°Small 185.801Medium 185.802Large 185.803Xtra-large 185.804

Quality blankets

Part n° Description185.323 Blanket in Scottish plaid Red lap185.324 Blanket in Scottish plaid Green lap

laimböck ®

Page 60: FOR BEST RESULTS DO NOT - Anglo Parts · PDF fileFOR BEST RESULTS DO NOT PRINT THIS PAGE! This page will interfere with the correct page order when printing recto-verso. Quality Parts

57© Van Geste l B&C 2013 Quality Par ts & Service

MGF 1996-2002 & MGTF 2002-2005

Practical accessories

800 mA automatic waterproof battery charger• Sparkproof and reverse polarity protected. • 100% sealed and all-weather safe, incl. wet and cold weather • Safely charges any size battery through 200 amp-hour capacity.• For all vehicle types: car, motorbike, boats, caravans... • Led battery status display • Check battery status before charging • Bulk charge raises battery voltage to 14.4 Vdc • Float/storage monitors and maintains fully charged battery for an indefinite period of time

Part n°

086.604 Heavy duty starter cablesPut this pair of battery cables in the boot and you are always ready to help someone with a dead battery. These cables are 250 cm long and have strong clamps.

Reflector-triangle Heavy duty, ‘E‘ approved triangle. In case of any emergency, be seen and put this triangle at least 30 meters in front of the obstacle.

Fire extinguisher‘E‘ Approved, 1 Kgr dry chemical fire extinguisher. We hope you will never have to use it, but, just in case, have it with you.

Part n°

185.332

Part n°

185.328

Part n°

185.333

Foot action tyre pump

High performance foot pump, 210 cubic

cm air with each press

Part n°

185.329

First aid kitOfficial FIRST AID needs.’E’ Approved, comes in a strong plastic box to keep clean when stored.

Part n°

185.331

Non-explosive fuel can, 5 Liters

This non-explosive fuel can is filled with a special aluminium webbing that stops it exploding.

Part n°

185.457

Expandable cup holder

Can be mounted nearly anywhere.

Adjusts its grip to the size of your cup or can. Can be

folded up when not in use.

Part n°

185.446

Page 61: FOR BEST RESULTS DO NOT - Anglo Parts · PDF fileFOR BEST RESULTS DO NOT PRINT THIS PAGE! This page will interfere with the correct page order when printing recto-verso. Quality Parts

58© Van Geste l B&C 2013Quality Par ts & Service

Castrol silicon spray,

400 mlFor protecting and

waterproofing ignition systems and locks.

Can also be used to protect chrome wire wheels or window channels etc.

Castrol cleanerThis great cleaner is perfect for cleaning engines & mechanical parts

Part n°

200.591

Part n°

198.036

Part n°

198.044

Water WetterThis super coolant helps

control overheating.Your car can run up to

7°C. cooler. 355ml.

Part n°

187.012

Force speed oil canMetal with black laquer

Rubber grease

A quality product. For greasing all rubber,

especially brakes & clutch

Part n°

052.117

Grease Gun

Part n°

200.604

Part n°

186.021

Cartridge Castrol LMX grease (Bearings)

Eezi-BleedMakes bleeding easy without

any pedal pumping. Uses your tyre pressure to

bleed brakes, clutch etc.

Part n°

200.746

Vizibleed bleederEasy bleeding of brakes and clutch

Part n°

053.176

MGF 1996-2002 & MGTF 2002-2005

Brake fluids, greases, cleaning, brake bleeders, etc.Part n°

053.225 1L Dot 5 high quality brake fluid

Part n°

053.177 1L. Dot 5 high performance brake fluid For race & rally

Castrol DWF spray, 400 mlHelps loosen rusty parts or

bolts, gives a lubricant coating and protects against corrosion

Part n°

186.040

Page 62: FOR BEST RESULTS DO NOT - Anglo Parts · PDF fileFOR BEST RESULTS DO NOT PRINT THIS PAGE! This page will interfere with the correct page order when printing recto-verso. Quality Parts

59© Van Geste l B&C 2013 Quality Par ts & Service

MGF 1996-2002 & MGTF 2002-2005

Waxoyl, rust removers, glues and protection products

Part n°

186.087

Tube glue gelThis tube of all purpose glue

is perfect for sticking small trim parts.

Wax Oyl anti-corrosion2.5L Starter kit

2.5 L. Wax Oyl refill can

400 ml Spray

Glue gel, pot 625 g.

This very strong all purpose glue is perfect for sticking panels, carpets and other trim parts.

ClearVue Rain-Kleer

Raindrops just blow off, keeps windscreen clear even without windscreen wipers. Doesn’t smear or damage

Part n°

186.080

Part n°

187.011

Part n°

187.009

Part n°

198.034

Brake Cleaner

Keep your brakes clean for your own protection

Part n°

198.038

Wet Protect

High performance spray that protects electronics from

moisture. Leaves a long lasting protective water resistant coating

when used. 40 ml.

Part n°

198.069

Part n°

186.084

Fertan rust killerPumpspray, 250ml

Part n°

186.151

Fertan rust killer1 liter bottle

Part n°

186.165

Fertan rust killer30 ml. tester

Part n°

186.164

5 L. Anti-freezePre-mixed all season protect coolant.

Up to -25°

Part n°

186.159

Glue sprayThis strong

spray glue can be used for all

purposes.

Part n°

187.010

FERTAN Rust KillerNo need to remove rust. FERTAN pulverizes & detaches it, then coverts the surface into an ideal paint base.FERTAN eliminates sanding, deep brushing, sandblasting. It may be applied both on slightly rusty metals and hard rust, as well as on bare metal to protect it from future rust. It’s an aqueous solution, penetrating everywhere under joints and even under paint cracks. It can be applied on damp or wet surfaces. It is harmless to plastic, rubber, chrome and already painted surfaces. FERTAN is only active in contact with iron or rust. It can be washed off from any other surfaces by water. It is non-flammable, harmless to health, physical contact or inhalation.

Page 63: FOR BEST RESULTS DO NOT - Anglo Parts · PDF fileFOR BEST RESULTS DO NOT PRINT THIS PAGE! This page will interfere with the correct page order when printing recto-verso. Quality Parts

60© Van Geste l B&C 2013Quality Par ts & Service

MGF 1996-2002 & MGTF 2002-2005

Auto Glym and body care products

AUTOGLYM

Car dusterThis 100% cotton dusting mop

has been treated to trap dust. Shake out and it’s ready to use again. DO NOT WASH OUT

Car wash handshoePerfect for washing your classical

ChamoisWe offer only the best real

natural chamois. These are specially made for the carindustry

having larger dimensions than most and are thick and very soft.

Approx. 40 x 62cm.Made in England

of course.Professional wringerHeavy duty industrial quality wringer for chamois, towels etc.Specifications: Rustproof steel frame, maintenance free rollers and bearings, adjustable pressure over the entire length of the rollers for uniform water removal. The complete wringer machine has two strong clamps for easy attaching

Part n°

185.551

Part n°

185.351

Part n°

185.343

Part n°

185.334

Part n°

185.335

Part n°

198.060

Hydra bladeEffortless removal of shampoo

rinse water

Part n°

185.046

Connolly hide care only

Use this at least once a year

Part n° Description198.005 480ml car shampoo & conditioner198.008 Cutting polish for badly damaged paint198.007 Super resign polish198.011 Extra gloss protection198.006 Clean wheels198.031 Instant tyre dressing198.009 Bumper care (rubber)198.012 Glass protection198.035 Fast glass cleaner (spray)198.013 Interior shampoo198.010 Vinyl & rubber care198.014 Instant tar remover198.003 Chrome polish (tube 75gr.)198.033 8 x polishing clothes198.039 Leather care198.057 Engine cleaner

Simply outstanding

Part n°

198.070

Autoglym Aqua WaxJust wash your car, apply Aqua Wax and buff to a perfect finish using the supplied cloth.Saves time as there is no need to dry car between washing and polishing.

Connolly hide care kit

For cleaning and preserving hides, upholstery and all leather clothing

Page 64: FOR BEST RESULTS DO NOT - Anglo Parts · PDF fileFOR BEST RESULTS DO NOT PRINT THIS PAGE! This page will interfere with the correct page order when printing recto-verso. Quality Parts

61© Van Geste l B&C 2013 Quality Par ts & Service

MGF 1996-2002 & MGTF 2002-2005

Books and manuals

MGF & TF workshop manuals These complete manuals are a must for enthusiasts.

Haynes modern sports cars: MGFby David KnowlesThis book - A Haynes series on modern sports cars - tells the full story of the MGF, from concept and development to its current reputation as one of the best sports cars in the marque’s 75-year history. Packed with interviews, anecdotes and technical data. This book also features MGF’s high speed runs on the famous Bonneville Salt Flats, the Geneva Super Sports cars and the MGF Steptronic, with it’s innovative automatic transmission.,Hardcover - 160 pages - 21.6 x 27.5 cm

MG sports carsBy John Heilig

A full color gallery of MG’s sport cars.This book includes prewar Chummy, Midgets, J-Series,

MGTA & MGTB and postwar MGT-series, MGA, MGB, MGB-GT, MGC & Midget, MGV8, MGRV8 & MGF.

Also with model histories and evolution, specifications and technical notes.

Hardcover - 96 pages - 21 x 21 cm

Part nr.

190.569

Part nr.

190.486

Part n° Description Language190.548 MGF 1996-2000 English190.549 MGF 1996-2000 Dutch190.550 MGF 1996-2000 French190.551 MGF 1996-2000 German190.861 MGF & TF 2000 on English

Part n°

190.868

MGF and TF By David KnowlesStory of the rebirth of a marqueIn the wake of the demise of the MG Midget and MGB, there seemed little prospect for the MG badge beyond being used as a kind of ‘GT’ badge for various Austins and Rovers. However, thanks to the determination of a few people and an enduring affection in public hearts the tale has had a happier ending. This is the story of that journey from desolation to rebirth, just like the phoenix from which the project that created the MGF took its name.With well researched text, many detailed specifications and over 300 illustrations & photos, mostly in full colour, this book is a ‘must have item’ for any real MG enthusiast. Hardcover - 192 pages - 18.8 x 24.8 cm

Part n°

190.867

MGF and TF Restoration ManualRoger ParkerThis book provides the MGF or TF owner with a complete workshop guide to mechanical and body restoration for the cars. With the MGF in production between 1995 and 2001, and the MG TF until 2011, many of the cars have survived in a structurally and mechanically sound state, without the huge costs and complications of needing a complete body restoration that is so often the case with pre-1980 MGs. Topics covered include: Model overview and parts supply - Workshop safety information - Bodywork - TrimAll mechanical components - Electrical systemsModifications. Hardcover - 304 pages - 21 x 29.6 cm

Page 65: FOR BEST RESULTS DO NOT - Anglo Parts · PDF fileFOR BEST RESULTS DO NOT PRINT THIS PAGE! This page will interfere with the correct page order when printing recto-verso. Quality Parts

62© Van Geste l B&C 2013Quality Par ts & Service

BELANGRIJKE PUNTENDe verkoopsvoorwaarden zijn op de achterzijde van de fakturen gedrukt en bevinden zich op onze web site. Aanpassingen worden in de recentste katalogus of prijslijst gezet en op onze web site bijgewerkt. Als u bij ons bestelt, gaat u akkoord met onze verkoopsvoorwaarden (en aanvaardt u ze). U mag altijd een nieuwe publikatie aanvragen. De recentste publikatie zal alle vorige vervolledigen en vervangen. Gelieve de belangrijkste punten hieronder vermeld te lezen.

ONZE VERKOPERSWe zijn geen getrainde technici en zijn niet aansprakelijk voor fouten die we zeggen of schrijven. We zijn autofanaten die u willen helpen. Voor technische uitleg bevelen we u de boeken uit de lijst in de katalogus aan.

ONZE KATALOGIGeen inspanning was ons te groot de juiste informatie in onze katalogi en op onze web site te zetten. We kunnen niet aansprakelijk gesteld worden voor fouten of onnauwkeurigheden i.v.m. de specifiëring. de prijsbepaling of de onderdeelnummers. We hebben het recht een fout te verbeteren. De Illustraties en foto’s in onze katalogen en op onze web site zijn slechts voorstellingen en er kunnen qua vorm kleine verschillen optreden, maar de geleverde produkten blijven qua kwaliteit en bestemming hetzelfde.

ONZE ONDERDEELNUMMERS EN PRIJZENAlle onderdelen (of sets van onderdelen) kregen van ons een stuknummer. De vereiste hoeveelheid (QT) staat voor de hoeveelheid voor afzonderlijk gebruik. De hoeveelheid die u vraagtkan verschillen en moet naast elk nummer van het onderdeel. dat u bestelt, vermeld staan. Gelieve te verwijzen naar onze recentste prijslijsten om de leverbaarheid te garanderen. Onderdelen die niet leverbaar zijn, kunnen soms tweedehands geleverd worden. Deze tweedehands onderdelen staan niet altijd in onze prijslijsten en op onze web site. De prijzen in onze prijslijsten en op onze web site zijn prijzen per stuk en staan er alleen ter informatie. Ze kunnen plots veranderen naargelang de stijging of daling van de inkoopprijs. Ze kunnen zonder of met B.T.W. vermeld staan. Dit is op elke prijslijst aangeduid. De stuknummers bestaan uit zes cijfers. De eerste drie cijfers geven de aard van het stuk aan. 161 staat bijvoorbeeld voor moeren, 162 voor schroeven, 163 voor platte rondellen. De staat van het onderdeel wordt in de prijslijst en op de web site vermeld of kan worden herkend aan het nummer. De volgende kodes zullen in de prijslijst en op de web site naast het nummer voor stukken, die niet nieuw geleverd worden, staan: SH = tweedehands, EX = geleverd op ruilbasis en een supplement zal worden aangerekend. NA = op het ogenblik niet beschikbaar. LH = links of RH = rechts. Bekeken vanuit de bestuurderszit. LHD = bestuurder aan linkerkant of RHD = bestuurder aan de rechterkant. A/R = Zoals vereist. Dit betekent dat de vereiste hoeveelheid naargelang de toepassing kan verschillen. USE = het stuknummer wordt door het aangegeven nummer vervangen.

BESTELLINGENU kan altijd bestellen via onze web site, per e-mail, fax, brief, telefoon, of gewoon in de winkel. Voor bestellingen die niet langs onze web site gebeuren gelieve rekening te houden met de volgende gegevens, wanneer u ons bestelformulier gebruikt: - uw klantennummer, naam, adres, telefoonnummer werk/thuis, faxnummer, VAT(BTW)-nummer voor bedrijven; - specifieer als het leveringsadres verschilt; - informatie over de auto, merk, model, bouwjaar, enz.; - gebruik zoveel mogelijk onze onderdeelnummers. Dit zal de behandeling van uw bestelling vergemakkelijken; - geef het aantal stukken aan en beschrijf de onderdelen; - duid de betaalwijze aan: Bank (voorafbetaling), VISA, EUROCARD of MASTER CARD. - Eens uw bestelling geplaatst, zetten we deze in de computer. Automatisch volgen dan de etiketten, de picking lists en de checking lists. Als u een geplaatste bestelling wil wijzigen, kan deze het hele systeem in de war sturen en, op die manier fouten of vertragingen veroorzaken. Daarom vragen we u de bestelling goed na te kijken, vóór u ze plaatst. Dit zal ons helpen de onderdelen op tijd te leveren. We danken u voor uw begrip.

BETALINGENKredietkaart: Op het tijdstip van publikatie aanvaarden we volgende kredietkaarten: VISA, EUROCARD, ACCES CARD, MASTERCARD. Gelieve het rekeningnummer, de vervaldag (en kode indien aangegeven) en de kaarthoudersnaam te vermelden.Bank: (Niet voor bestellingen via onze web site) Als de goederen bijeengebracht, ingepakt, gewogen en gemeten zijn, zal het faktuur opgesteld worden en zullen we het totale te betalen bedrag, het faktuurnummer en onze bankgegevens meedelen. Gelieve het faktuurnummer en het klantennummer op elke betaling te noteren. (De betaling dient te gebeuren zonder bankkosten voor de begunstigde.)

VERZENDINGNationaal: We leveren bij u thuis, en de goederen, transportkosten inbegrepen, moeten bij levering C.O.D. betaald worden, als u geen kredietkaart gebruikt.Internationaal: We verzenden via UPS (United Parcel Services) voor kleine pakken, waarbij de transportkosten voorafbetaald zijn. Bij ontvangst betaalt u nog alleen de TAX indien u in een niet EEG land woont. Voor grote en zware pakken gebruiken we een goedkope en snelle transportmethode. Anglo Parts pakt zijn goederen goed in en het risiko op beschadiging is zeer klein. Toch moet u met het volgende rekening houden. Anglo Parts kan niet aansprakelijk gesteld worden voor verloren of beschadigde goederen tijdens het transport. Klachten over verlies en schade, die niet door de vervoerder veroorzaakt werden, moeten binnen drie dagen na de ontvangst van de bestelling ingediend worden. Al het verpakkingsmateriaal moet ter verifikatie bijgehouden worden. Het vervoer van glas is niet verzekerbaar en gebeurt op risiko van de koper.

ONTVANGST VAN DE GOEDERENGelieve bij de ontvangst van elke verzending na te kijken of zegels en plakbanden niet stuk zijn en het pak niet beschadigd is. In geval van beschadiging of verlies, schrijft u dit op de vrachtbrief in overeenstemming met de aktuele toestand en hoeveelheid van de inhoud van uw verzending, voordat u het ontvangstbewijs tekent. Bewaar uw kopie bij het faktuur en dien onmiddellijk bij de transportfirma een klacht in. Hou in elk geval de verpakking tot de zaak geregeld is. Bij Anglo Parts kontroleren twee personen de goederen, de eerste keer tijdens het bijeenbrengen en de tweede keer bij het verpakken van de goederen om zeker geen fouten te maken. Uiteindelijk moet de klant zelf de allerlaatste kontrole bij ontvangst uitvoeren. Vergewis er u van dat u alle gefaktureerde goederen ontvangen heeft en dat alle mechanische goederen werken. Wacht niet met de kontrole van de goederen tot u ze werkelijk nodig heeft en meld problemen binnen drie dagen na ontvangst.

DE WAARBORGBijna alle onderdelen voor klassieke wagens worden in kleine hoeveelheden gefabriceerd door bedrijven, die dit voor een aanvaardbare prijs doen. Anglo Parts probeert zoveel mogelijk zelf de goederen na te kijken, maar we kunnen niet elk produkt kontroleren. Vóór de montage moet de gebruiker de Iaatste kontrole zelf uitvoeren. Vooral de mechanische produkten moeten worden nagekeken om er zeker van te zijn dat ze in de beste staat verkeren. De garantieperiode begint vanaf de faktuurdatum, niet vanaf de datum van plaatsing. De waarborg op onze onderdelen is normaal en redelijk, maar de klachten zijn beperkt tot de waarde van het komponent en dekt in geen geval: uurloon, transportkosten, fouten bij een komponent dat eraan vastzit, fouten als gevolg van een slechte plaatsing of onderdelen die voor rally of kompetitie gebruikt worden. Bij klachten i.v.m. de waarborg moeten alle produkten naar de winkel van aankoop teruggebracht worden. Daarbij moet u de volgende punten in acht nemen: -de waarde moet groter zijn dan 7,5 Euro -de verzendingskosten en taksen moeten bij terug-zending van de goederen voorafbetaald zijn; -alle goederen moeten schoon en goed verpakt teruggestuurd worden. Zodra U of derden het onderdeel uit elkaar hebben gehaald, zijn we niet meer aansprakelijk. Uiteindelijk beslist Anglo Parts zelf of het gaat over een intrinsiek defekt aan de eenheid, of het defekt bij plaatsing veroorzaakt werd. Goederen beschadigd door slechte verpakking of transport tijdens de terugzending komen niet in aanmerking voor onderzoek.

TERUGZENDENWanneer U een verkeerd onderdeel als gevolg van uw foute bestelling ontvangen hebt, zijn we bereid het terug te nemen tegen de waarde van het goed voor onderdelen met een waarde van minimum 7,5 Euro. We rekenen u wel 15 % heropnamekosten aan. We aanvaarden geen terugzendingen: zonder een kopie van het faktuur, 30 dagen na de faktuurdatum, van lagers, zuigers, zuigerringen, goederen per lopende meter, bekledingsonderdelen (linnen kappen, hoofdsteunen, dekzeilen, zetelovertrekken, panelen, enz.) of elk ander goed waarbij men met de plaatsing wou beginnen. Bij terugzending moeten de taksen en transportkosten voorafbetaald zijn. Anglo Parts kan u, verpakkings-of verzendingskosten van het land van ontvangst en de kommissie, die we aan de kredietkaarteninstelling moesten betalen, niet vergoeden. De uitbetalling geschied via een waardebon.

SUPPLEMENTEen supplement komt bovenop de prijs voor onderdelen, die op ruilbasis worden aangeboden. Dit supplement staat in de prijslijst en op onze web site naast het betrokken onderdeelnummer en zal gefaktureerd worden in afwachting van de terugzending van de oude, ingeruilde eenheid. Dit supplement wordt terugbetaald wanneer we de eenheid volledig, schoon, zonder olie en twee maanden na de faktuurdatum terugkrijgen. Gelieve ook een kopie van ons faktuur toe te voegen. De verzendingskosten moeten volledig door u voorafbetaald worden. Indien u ons de oude eenheid terugstuurt, vragen we u een brief te sturen met uw naam, adres, telefoonnummer, verzendingsdatum en beschrijving van de goederen, het supplement inbegrepen. Gelieve enkele kopieën te maken waarvan één exemplaar op het pak te bevestigen, één in het pak te steken en één zelf te bewaren. We hebben ze nodig bij de invoer van de goederen. Bij de aankomst van de goederen kijken we onmiddellijk de volgende punten na: - Is het stuk goed verpakt ? - Werd het tijdens het transport beschadigd ? - Komt de oude eenheid met het type, dat we u zonden, overeen (het juiste origineel) ? - Is de eenheid volledig en zijn de essentiële onderdelen nog reviseerbaar ? Gelieve geen MGA ruitenwissermotor te sturen voor ruil met een TD ruitenwissermotor of zend ons geen motor met een gebroken krukas. In dit laatste geval zullen we alleen de stukwaarde min de waarde (volgens onze beoordeling) van de krukas terugbetalen.

BACK ORDERSDe goederen, die we op het tijdstip van uw bestelling niet in voorraad hebben, houden we in “back order”. We laten u dan weten wanneer we ze u opnieuw kunnen leveren. We reserveren de onderdelen voor u voor een periode van veertien dagen (vanaf het ogenblik waarop we onze brief gepost hebben). Indien u ons binnen die periode niet gekontakteerd hebt zijn deze onderdelen niet meer voor U gereserveerd. Als u bestelt, kan u altijd specifiëren “geen back orders” of ons vragen alle vorige te annuleren. Als een onderdeel in “back order” niet meer kan worden geleverd, laten we u dit ook weten. Als u dan beslist dit onderdeel tweedehands te kopen, gelieve dit te vragen en we zullen al het mogelijke doen het onderdeel te vinden.

MGF 1996-2002 & MGTF 2002-2005

Belangrijke informatie

Page 66: FOR BEST RESULTS DO NOT - Anglo Parts · PDF fileFOR BEST RESULTS DO NOT PRINT THIS PAGE! This page will interfere with the correct page order when printing recto-verso. Quality Parts

63© Van Geste l B&C 2013 Quality Par ts & Service

Les illustrations dans ce catalogue ne sont que des représentations. Les produits fournis peuvent être différents en ce qui concerne la forme, mais la qualité et le but restant pareils.

LES POINTS IMPORTANTS Les conditions de vente sont imprimées au verso des factures et les modifications sont mentionnées dans la catalogue la plus récent et dans la liste de prix. Si vous commandez chez nous, vous êtes d’accord avec nos conditions de vente (vous le acceptez). Vous pouvez toujours demandez une nouvelle publication. L’édition complètera et remplacera toutes les précédentes. Vieillez lire les points les plus importants, mentionnés ci-dessous.

NOS VENDEURS Nous ne sommes pas des techniciens bien expérimentés et nous ne somme pas responsable des erreurs que nous disons ou écrivons. Nous sommes des enthousiastes et voulons vous aider. Pour une explication un peu plus technique, nous vous recommandons les livres de la liste de notre catalogue.

NOS CATALOGUES Nous nous sommes efforcés à mettre dans notre catalogue des information correctes. Nous ne pouvons pas être rendu (civilment) responsables d’erreurs ou d’inexactitudes concernant la spécification, l’estimation, ou les numéros de pièce. Nous avons le droit de corriger une faute.

NOS NUMEROS DE PIECE ET LES PRIX Nous avons donné à chaque pièce (ou sets de pièces) un numéro. La quantité requise (QT) se réfère à la quantité pour un usage particulier. La quantité que vous demander peut être différente et doit se trouver à côté de chaque numéro de pièce que vous commandez. Veuillez vous référer à nos listes de prix le plus révicentes pour garantir la disponibilité. Des pièces non disponibles peuvent être fournies en occasion. Ces pièces en occasion ne se trouvent pas toujours dans nos listes. Les prix dans nos listes de prix sont des prix par pièce et s’y trouvent seulement à titre informatif. Ils peuvent varier selon l’augmentation ou la baisse des prix d’achat. Ils peuvent être mentionnés sans ou avec la T.V.A. Ceci est indiqué dans la liste de prix. Les numéros de pièce se composent de chiffres. Les trois premiers chiffres indiquent la nature de la pièce. 161 se réfère par example à écrous, 162 à boulons, 163 à rondelles plates. L’état de la pièce est mentionné dans la liste de prix ou peut être reconnu au numéro. Les codes suivants se trouvent dans la liste à côté du numéro de pièces qui ne sont pas livrées comme nouvelles. SH = en occasion, EX - fourni sur base d’échange et on vous comptera un supplément. NA - pas disponible en ce moment. LH - gauche ou RH - droite. Vu du point de vue du siège du conducteur. LHD - le conducteur à gauche. RHD - le conducteur à droite. A/D - comme requis. Cela signifie que la quantité requise peut être différents selon l’application. USE - le numéro de pièce a été remplacé par le numéro indiqué.

LES COMMANDES Vous pouvez toujours commander par courrier, par téléphone, par téléfax, ou bien au magasin. Veuillez tenir compte des données suivantes si vous employez notre bon de commande: - votre numéro de client, votre nom, votre adress, votre numéro de téléphone travail/privé, votre numéro de fax, le numéro de T.V.A. pour les entreprises; - spécifiez si l’adress de livraison est différente; - informations sur la voiture: la marque, le modèle, l’année de construction, etc.; - utilisez autant que possible nos numéros de pièce. De cette manière, nous pouvons traiter vos commandes plus rapidement; - donnez le nombre des pièces et décrivez les; - indiquez le moyen de paiement: Banque, paiement à l’avance, VISA, EUROCARD, MASTER CARD. Une fois votre commande passée, nous l’introduisons dans l’ordinateur. Les étiquettes, les “picking lists” et les “checking lists” suivent automatiquement. Si vous voulez modifier une commande passée, vous risquez de confondre tout le système et, de cette manière, causer des erreurs ou des retards. C’est pourquoi nous vous demandons de bien contrôler votre commande avant de la passer. Cela nous aidera à livrer les pièces à temps. Nous vous remercions pour votre aide.

LES PAIEMENTS La carte de crédit: Au moment de la publication, nous acceptons les cartes de crédits suivantes: VISA, ACCESSCARD, MASTERCARD. Veuillez mentionner le numéro de compte, l’échéance (et le code si indiqué) et le nom du titulaire de carte. La Banque: Si les produits ont été ramassés, emballés, pasés et mesurés, on rédigera la facture et nous communiquerons le montant total à payer, le numéro de la facture et nos données bancaires. Veuillez noter pour chaque paiement le numéro de client. (Le paiement doit arriver sans frais bancaires pour le bénéficiaire.)

L’EXPEDITION National: nous livrons chez vous, et les produits, frais de transport inclus, doivent être payés COD à la livraison si vous n’utilisez pas de carte de crédit. International: nous expédions par U.P.S. (United Parcel Services). Il faut payer d’avance les frais de transport pour les petits paquets. À la réception, vous ne payerez plus que la TAXE si vous n’habitez pas dans un pays de la CEE. Pour les paquets plus grands, nous utilisons une méthode plus rapide et moins chère. Anglo Parts emballe bien les produits et la risque d’endommager est très petit. Il faut cependant tenir compte de ce qui suit. Anglo Parts ne peut être rendue responsable produits endommagés ou perdus pendant le transport. Il faut introduire les plaintes de pertes ou dégats dans trois jours après la réception de la commande. Il faut garder le matériel d’emballage pour vérification. Nous n’assurons pas le transport de verre et le transport se passe au risque de l’acheteur.

LA RECEPTION DES PRODUITS Veuillez contrôler à la réception de chaque envoi si les cachets et les scathes sont cassés si le paquet n’est pas endommagé. En cas de pertes ou dégâts, vous l’inscrivez sur la connaissement en concordance avec l’état actuel et le quantité de votre envoi avant de signer le reçu. Gardez la copie avec la facture et introduisez immédiatement une plainte chez le transporteur. Gardez en tout cas l’emballage jusqu’à ce que les problèmes soient résolus. Chez Anglo Parts, deux personnes vérifient les produits, d’abord au ramassage et ensuite à l’emballage des produits pour éviter des erreurs. Finalement, le client même doit vérifier et dernier lieu les produits à la réception. Vérifiez si vous avez reçu tous les produits et si tous les produits mécaniques fonctionnent. Ne reportez pas le contrôle jusqu’au moment où vous en avez besoin, et rapportez les produits dans trois jours après la réception.

LA GARANTIE Presque toutes les pièces de voitures classiques sont fabriquées par des entreprises qui le font à un prix raisonable. Anglo Parts essaie, autant que possible, de contrôler elle-même les produits, mais nous ne pouvons pas contrôler chaque produit. Avant le montage, le client doit effectuer lui-même le dernier contrôle. Il faut vérifier les produits mécaniques pour être sûr qu’ils se trouvent en bon état. La période de garantie commence à partir de la date de la facture, et pas à partir de la date de l’installation. La garantie de nos pièces est normale et raisonnable, mais les plaintes sont limitées à la valeur de l’élément et ne couvre en aucun cas le salaire à l’heure, le transport, les défauts d’un élément relatif, les défauts à la suite d’une mauvaise installation ou les pièces qui sont utilisées pour les “rally” ou les competitions. En cas de plainte concernant la garantie, il faut rapporter tous les produits au magasin d’achat en tenant compte des points suivants: - la valeur doit dépasser 7,5 Euro les frais d’expédition et les taxes doivent être payés d’avance au renvoi des produits; - il faut renvoyer les produits propres et bien emballés. A partir du moment où une tierce personne a démonté les pièces, nous ne sommes plus responsables. Finalement, Anglo Parts décide elle-même s’il s’agit d’un défaut inhérant à l’unité ou bien d’un défaut dû à l’installation. Les produits endommagés par un mauvais emballage ou un transport inadéquat pendant le renvoi ne seront pas pris en considération de vérification.

LA REEXPEDITION Si vous avez reçu une fausse pièce à la suite de votre commande incorrecte, nous sommes prêts à reprendre la pièce contre la valeur du produit, moins 15% des frais de reprise. Veuillez noter que les pièces doivent avoir une valeur de minimum 7,5 Euro. Nous n’acceptons pas de réexpédition sans une copie de la facture, trente jours après la date de la facture, des produits au mètre, des anneaux-pistons, des pièces de rechange de garniture intérieur (comme des capotes, des moquettes, des velours, des couvres toneau) ou de toute pièce dont l’installation a déjà été commencée. A la réexpédition, tous les frais de transport et les taxes doivent être payés d’avance. Anglo Parts ne peut pas rembourser les frais d’emballage et d’expédition du pays de réception, ainsi que la provision qu’elle a dû payer aux carte crédits. Nous vous remboursons ce montant avec un “Gift Certificate”.

LE SUPPLEMENT Un supplément s’ajoute au prix pour les pièces qui seront offertes sur bases d’échange. Ce supplément se trouve dans la liste de prix à côté de numéro de pièce y relatif et sera facturé en attente de renvoi de la vieille unité échangée. Ce supplément sera remboursé quant nous recevrons, deux mois après la date de la facture, l’unité entière, propre et sans huile. Veuillez aussi y ajouter une copie de notre facture. Il faut que vous payiez les frais d’expédition d’avance. Si vous nous renvoyez la vieille unité, nous vous demandons d’envoyer une lettre avec votre nom, votre adress, votre numéro de téléphone, la date d’expédition et la description du produit, le supplément inclus. Veuillez faire quelques copies, dont vous en attachez une au paquet, dont vous en mettez un dans le paquet et dont vous en gardez une pour vous-même. Nous en avons besoin à l’importation des produits. A l’arivée des produits, nous vérifions les points suivants: - la pièece, est-elle bien emballé? - A-t-elle été endommagée pendant le transport? - le vieille unité, correspond-t-elle au type nous vous avons envoyé (l’original)? - l’unité, est-elle complète et les pièces essentielles sont-elles encore révisables? Veuillez ne pas envoyer de moteur d’essuie-glace au lieu d’un moteur Spitfire ou ne envoyez pas un moteur avec un arbre-coude cassé. Dans ce dernier cas, nous ne rembourserons que la valeur de la pièce moins le valeur de l’arbre-coude (selon notre estimation).

LES “BACK ORDERS” Les produits que nous n’avons pas en stock au moment de votre commande sont gardés en “back order”. Nous vous laissons savoir quand nous pouvons à nouveau vous les livrer. Nous vous réservons les pièces pendant une période de 15 jours (à partir du moment où nous avons posté notre lettre). Si vous nous contactez pas pendant cette période, les pièces ne vous sont plus réservées. Si vous commandez, vous pouvez toujours spécifier “pas de back orders”, ou bien nous demander d’annuler tous les “back orders” précédents. Si nous ne pouvons plus livrer une pièce en “back order”, nous vous le laissons savoir. Si vous décidez d’acheter cette pièce en occasion, veuillez le demander et nous ferons notre possible pour la trouver.

MGF 1996-2002 & MGTF 2002-2005

Informations importantes

Page 67: FOR BEST RESULTS DO NOT - Anglo Parts · PDF fileFOR BEST RESULTS DO NOT PRINT THIS PAGE! This page will interfere with the correct page order when printing recto-verso. Quality Parts

64© Van Geste l B&C 2013Quality Par ts & Service

1. EINFÜHRUNGDie Abbildungen in diesem Katalog oder auf unserer Webseite sind nicht exakt oder maßstabsgerecht. Die tatsächlichen Teile können geringfügig von den Abbildungen abweichen, die Qualität und die Verwendbarkeit werden jedoch nicht beeinträchtigt. Die Rover-Gruppe liefert keine Ersatzteile mehr, daher übernimmt ANGLO-PARTS diese Dienstleistung, indem weltweit Rover-Ersatzteile von ANGLO-PARTS eingeführt, neu hergestellt und ausgeliefert werden. Wir benutzen dazu Original “blue prints” und Original-Musterbauteile, um einen erschwinglichen Preis zu garantieren. Die Musterteile werden außerdem noch von anderen Originalherstellern wie z. B. Lucas, Lockhead, Armstrong, Vandervell, Glacier, Borg & Beck etc. hergestellt. Wenn Originalteile dieser Hersteller verfügbar sind, wird ANGLO-PARTS Ihnen diese Teile liefern, auch wenn sie etwas teurer sind. Wir sind der Meinung, dass Qualität und Authentizität an erster Stelle stehen sollten.

2. ALLGEMEINE GESCHÄFTSBEDINGUNGENWir verkaufen und liefern ausschließlich auf der Basis unserer Allgemeinen Verkaufs- und Lieferbedingungen, die auf der Rückseite der Bestellformulare und Rechnungen abgedruckt sind. Sie finden diese Allgemeinen Geschäftsbedingungen auch in diesem Katalog. Wenn Sie bei uns bestellen, sind Sie mit unseren Verkaufsbedingungen einverstanden und akzeptieren diese. Die Firma ANGLO-PARTS behält sich vor, die Allgemeinen Geschäftsbedingungen von Zeit zu Zeit neuen Gegebenheiten anzupassen, und die jeweils letzte Fassung findet Anwendung auf die Verträge.

3. TECHNIKFür technische Erläuterungen empfehlen wir Ihnen die Handbücher im Inhaltsverzeichnis des Kataloges. Wir übernehmen keine Gewähr für technische Informationen in unseren Katalogen, diese dienen lediglich der Darstellung unserer Waren.

4. KATALOGWir haben uns bemüht, unsere Kataloge so sorgfältig wie möglich zu erstellen. Wir übernehmen keine Verantwortung für Fehler oder Ungenauigkeiten im Zusammenhang mit der Spezifizierung, der Preisbestimmung oder den Ersatzteilnummern. Wir behalten uns das Recht vor, aufgetretene Fehler ohne Rechtsnachteile für uns zu verbessern. Gewährleistungsansprüche entstehen nicht, wenn der Fehler zurückzuführen ist auf Verletzung von Bedienungs-, Wartungs- und Einbauvorschriften, ungeeignete oder unsachgemäße Verwendung, fehlerhafte oder nachlässige Behandlung und natürlichen Verschleiß des Liefergegenstandes sowie Schäden aus sportlichen Einsätzen. Zugesicherte Eigenschaften müssen ausdrücklich schriftlich im Einzelnen als solche bezeichnet werden.

5. ERSATZTEILNUMMERN UND PREISEAlle Ersatzteile oder Gruppen von Ersatzteilen haben von uns eine Ersatzteilnummer erhalten. Die Abkürzung QTY steht für die für einen bestimmten Einsatz erforderliche Menge des jeweiligen Ersatzteiles. Die von Ihnen bestellte Liefermenge kann davon abweichen und sollte deutlich neben der jeweiligen Ersatzteilnummer angegeben werden. Bitte verwenden Sie die jeweils neueste Preisliste, um die Lieferbarkeit zu gewährleisten. Ersatzteile, die nicht lieferbar sind, können wir manchmal aus zweiter Hand besorgen. Diese Gebraucht-Ersatzteile stehen nicht immer in unserer Preislisten. Die Preise in unserer Preisliste sind Stückpreise, sie können sich infolge einer Veränderung der Einkaufspreise ebenfalls ändern. Die Listenpreise beinhalten, falls nicht anders bezeichnet, die jeweilige gesetzliche Mehrwertsteuer. Die Ersatzteil-Nummern bestehen aus sechs Ziffern. Die ersten drei Ziffern geben die Art des Ersatzteils an: 161 z. B. steht für Muttern, 162 für Schrauben und 163 für Scheiben. Der Zustand des Ersatzteiles wird in der Preisliste erwähnt oder kann anhand der Nummer erkannt werden. Die folgenden Codes stehen in der Preisliste neben der Ersatzteilnummer, falls dieses Teil nicht neu geliefert werden kann: SH bedeutet aus zweiter Hand, EX wird auf Tauschbasis geliefert, und ein Mehrpreis (Surcharge/Surch) wird berechnet, NA bedeutet im Augenblick nicht erhältlich. LH bedeutet links, RH rechts - jeweils vom Fahrer aus gesehen. LHD bedeutet Fahrer auf der linken Seite und RHD Fahrer auf der rechten Seite. A/R bedeutet “wie erforderlich”, das heißt, dass die erforderliche Menge nach dem Zweck unterschiedlich sein kann. Durch die Abkürzung USE wird eine neue Ersatzteilnummer bezeichnet, welche die ursprüngliche Nummer ersetzt.

6. AUFTRAGSERTEILUNGSie können per Fax, Brief, telefonisch oder wie gewohnt im Shop bestellen. Bei Verwendung unseres Bestellformulars möchten wir Sie bitten, dieses vollständig auszufüllen: Ihre Kunden-Nummer, Adresse, Telefon- und Faxnummer, Umsatzsteuer-ID-Nummer (gewerblich). - Spezifizieren Sie die Lieferadresse, falls diese von der Rechnungsanschrift abweicht. - Geben Sie uns die vollständigen Angaben zu Ihrem Fahrzeug wie Marke, Typ, Baujahr usw. - Benutzen Sie ausschließlich unsere Ersatzteilnummern, dadurch kann Ihre Bestellung schneller bearbeitet werden. - Geben Sie die gewünschte Menge der Ersatzteile unter Verwendung der Beschreibung im Katalog an. - Geben Sie die Art der Zahlungsweise an. - Sobald wir Ihren Auftrag erhalten haben, wird dieser elektronisch weiterverarbeitet, automatisch werden dann daraus die Bestellungen, Lieferscheine und Rechnungen erstellt. Wenn Sie einen einmal gegebenen Auftrag ändern möchten, kann dies zu Fehlern oder Verspätungen führen. Deshalb möchten wir Sie bitten, den Auftrag vor Erteilung genauestens zu überprüfen. Dies hilft uns, die Ersatzteile pünktlich zu liefern. Vielen Dank für Ihr Verständnis.

7. ZAHLUNGSWEISESobald die Bestellung konfektioniert, verpackt, gewogen und gemessen wurde, wird die Rechnung erstellt, und wir werden Ihnen den vollständigen Rechnungsbetrag, die Rechnungsnummer und unsere Bankverbindung mitteilen. Bitte geben Sie bei jeder Zahlung die Rechnungsnummer und Ihre Kundennummer an. Kreditkarten: Zum Zeitpunkt der Drucklegung dieser Allgemeinen Informationen akzeptieren wir folgende Kreditkarten: Visa, Eurocard, Accesscard, Mastercard. Bitte geben Sie bei Kreditkartenzahlung die Kartennummer, das Verfalldatum (und die Prüfnummer, wenn angegeben) sowie den Namen des Karteninhabers an. Eine Zahlung per Nachnahme ist nur im Inland möglich.

8. VERSENDUNGDa der Versand unserer Waren auf Gefahr und Kosten des Bestellers erfolgt, bitten wir Sie, in der Bestellung zu spezifizieren, ob Sie die Waren abholen oder einen Dritten mit der Lieferung beauftragen. ANGLO-PARTS wird die bestellten Waren ausreichend verpacken, um das Risiko von Transportbeschädigungen zu reduzieren. ANGLO-PARTS ist nicht verantwortlich für Ware, die beim Transport verlorengegangen oder beschädigt wurde. ANGLO-PARTS übernimmt keine Haftung für den Frachtführer, der im Auftrag des Bestellers tätig wird. Wir empfehlen daher bei Erhalt der Ware: Überprüfen Sie bitte bei Lieferung der Ware, ob die Verpackung, eventuelle Siegel oder Klebestreifen aufgebrochen wurden und ob die Verpackung beschädigt ist. Für den Fall einer Beschädigung oder das Fehlen von Teilen machen Sie bitte eine entsprechende Notiz auf den Frachtbrief hinsichtlich des Zustandes und des Inhaltes Ihrer Sendung, bevor Sie den Erhalt quittieren. Behalten Sie Ihre Kopie der Rechnung und setzen Sie sich sofort mit Ihrem Frachtführer in Verbindung. Bewahren Sie die Verpackung auf, bis die Fragen geklärt wurden. Wir überprüfen zweimal die Vollständigkeit der Bestellung, das erste Mal beim Konfektionieren und das zweite Mal beim Verpacken der Waren. Daneben sind Sie allerdings verpflichtet, die letzte Kontrolle durchzuführen. Wir verweisen auf die Fristen in unseren Allgemeinen Verkaufs- und Lieferbedingungen.

9. RÜCKSENDUNGENWenn Sie ein Ersatzteil erhalten, für dieses aber keine Verwendung haben und Sie diese Falschbestellung zu vertreten haben, sind wir bereit, diesen Artikel zurückzunehmen. Rücksendungen erfolgen auf Kosten und Gefahr des Bestellers. Wir werden Ihnen den Rechnungsbetrag der Waren abzüglich einer Wiedereinlagerungsgebühr von 15 % erstatten. Wir akzeptieren keine Rücksendung ohne eine Durchschrift unserer Rechnung. Nach Ablauf von mehr als 30 Tagen nach dem Rechnungsdatum akzeptieren wir keine Rücksendung. Lager, Kolben, Kolbenringe, Meterware und Verkleidungsteile (Kopfstützen, Verdecke, Verdeckabdeckungen, Sitzbezüge, Türverkleidungen) sind vom Umtausch ausgeschlossen. Dies gilt auch für Ersatzteile, mit denen ein Installationsversuch unternommen wurde. Wir erstatten keinerlei Verpackungs- und Versandkosten sowie Servicegebühren, die wir an Kreditkartenfirmen bezahlt haben. Die Rückzahlung erfolgt über einen Warengutschein in Höhe des Rückzahlungsbetrages.

10. LIEFERUNG VON ERSATZTEILEN AUF AUSTAUSCHBASISFür Ersatzteile, die von uns auf Austauschbasis angeboten werden, berechnen wir einen Mehrkostenpreis. Dieser Mehrkostenpreis ist in unserem Preisverzeichnis neben der betreffenden Ersatzteilnummer angegeben. Bei Bestellung eines Ersatzteiles auf Austauschbasis wird neben dem Preis für das Ersatzteil auch der Mehrkostenpreis in Rechnung gestellt. Dieser Mehrkostenpreis wird ganz oder teilweise zurückerstattet, vorausgesetzt wir erhalten vom Besteller das entsprechende Austauschteil komplett, sauber und ölfrei und innerhalb von zwei Monaten nach unserem Rechnungsdatum. Bitte senden Sie eine Kopie unserer Rechnung mit. Die Versendung des Austauschteiles erfolgt auf Gefahr und Kosten des Bestellers. Wenn Sie uns das Austauschteil aus dem Ausland schicken, sollten Sie uns einen Brief beilegen, der Ihren Namen, Anschrift, Telefonnummer und das Versendungsdatum sowie eine Beschreibung der Güter beinhaltet und den Mehrkostenbetrag. Bitte fertigen Sie von diesem Brief einige Kopien an, fügen eine dem Paket bei, kleben eine auf das Paket und behalten eine weitere für Ihre eigenen Unterlagen. Wir benötigen diese Informationen für die Einfuhrabfertigung. Bei Eingang der Ware überprüfen wir sofort die folgenden Punkte: War das Teil ausreichend verpackt oder sind Transportbeschädigungen aufgetreten? (Wenn ja, werden wir Sie sofort davon in Kenntnis setzen). Entspricht das Altteil dem von uns gelieferten Teil? Ist das Altteil vollständig, und sind die wichtigsten Ersatzteile noch wiederherstellbar? Bitte beachten Sie, dass wir im Falle der Übersendung eines Falschteiles oder eines beschädigten Teiles nur den jeweiligen Stückwert des zurückgesandten Teiles erstatten. Insoweit führen wir eine Schätzung durch.

11. NACHLIEFERUNGENWaren, die zum Zeitpunkt Ihres Auftrages nicht vorrätig sind, werden als Nachlieferung (Backorder) behandelt. Wir werden Sie sofort über die Verfügbarkeit der Teile informieren. Das Ersatzteil ist mit einer Frist von 14 Tagen nach Absendung unserer Benachrichtigung für Sie reserviert. Sollten Sie diese Frist verstreichen lassen, verfällt die Nachlieferung. Wenn Sie keine Nachlieferung erhalten möchten, können Sie bei Auftragserteilung auch ”keine Nachlieferungen” vermerken. Nachlieferungen können zu jeder Zeit annulliert werden. Wenn das Ersatzteil nicht mehr lieferbar ist, werden wir Sie sofort davon in Kenntnis setzen. Sie können dann entscheiden, ob Sie das Ersatzteil aus zweiter Hand kaufen wollen. Sobald uns ein entsprechender Auftrag vorliegt, werden wir uns bemühen, dieses Ersatzteil für Sie zu besorgen.

MGF 1996-2002 & MGTF 2002-2005

Wichtige Auskünfte

Page 68: FOR BEST RESULTS DO NOT - Anglo Parts · PDF fileFOR BEST RESULTS DO NOT PRINT THIS PAGE! This page will interfere with the correct page order when printing recto-verso. Quality Parts

65© Van Geste l B&C 2013 Quality Par ts & Service

Allgemeine Verkaufs- und Lieferbedingungen der ANGLO-PARTS Autoteile GmbH~ Wetzlar

1. Lieferungen durch uns erfolgen ausschließlich unter Zugrundelegung unserer nachfolgenden Verkaufs- und Lieferbedingungen. Bestellungen nehmen wir ausschließich

zu diesen Bedingungen an. Änderungen und Ergänzungen bedürfen der Schriftform. Andere Allgemeine Geschäftsbedingungen gelten auch dann nicht, wenn ihnen im

Einzelfall nicht ausdrücklich widersprochen wurde.

2. Wird eine Bestellung schriftl., mündlich oder auf andere weise getätigt, bleibt dem Besteller eine Frist von 7 Werktagen, um diese Bestellung zu wiederrrufen, sofern

noch keine Lieferung erfolgt ist. Nach Ablauf der 7-Tage Frist hat Anglo-Parts das Recht 30% des Bestellwertes dem Kunden zu berechnen oder 30% vom Wert eines

Vertrages zu berechnen. Der Kunde hat außerdem innerhalb einer Frist von 7 Werktagen, nach Erhalt der Ware, die möglichkeit die erhaltene Ware an Anglo-Parts zurück-

zugeben (gemäß Punkt 9 “WICHTIGE AUSKÜNFTE”).

Der Versand unserer Ware erfolgt auf Gefahr und auf Kosten des Bestellers. Die tatsächliche Höhe der der Transport- und Verpackungskosten können nur berechnet werden,

nach der Zusammenstellung und Verpackung der Warensendung. (da Größen- und Gewichtsabhängig.)

3. Sofern der Versand nicht gegen Nachnahme erfolgt, sind Zahlungen rein netto innerhalb von 10 Tagen nach Rechnungserhalt zu leisten. Im Verzugsfall hat der

Besteller Verzugszinsen in Höhe von 3 % über dem jeweils geltenden Diskontsatz der Deutschen Bundesbank zu bezahlen. Die Geltendmachung eines weiteren Verzugss-

chadens bleibt vorbehalten.

4. Der Besteller ist - sofern er Kaufmann ist - verpflichtet, unsere Ware unmittelbar nach Erhalt auf Mängel zu untersuchen und eventuelle Mängel unverzüglich, spätestens

innerhalb von 8 Tagen nach Erhalt der Ware - bei zunächst nicht erkennbaren Mängeln innerhalb von 8 Tagen nach deren Bekanntwerden - per Einschreiben bei uns

geltend zu machen. Bei offensichtlichen Mängeln trifft die vorgenannte Verpflichtung auch Nichtkaufleute. Werden berechtigte Mängel gerügt, sind wir lediglich zur Nach-

besserung bzw. zur Ersatzlieferung verpf!ichtet, allerdings erst, nachdem uns die von uns gelieferte Ware zur Verfügung gestellt worden ist. Wir behalten uns die Über-

prüfung etwa gerügter Mängel durch den jeweiligen Hersteller vor und sind nicht zu Nachbesserungen oder Ersatzlieferungen verpflichtet, bevor dessen Prüfungsergebnis

vorliegt. Nach endgültig fehlgeschlagener Nachbesserung bzw. Ersatzlieferung ist der Besteller zur Wandelung oder Minderung berechtigt. Gewährleistungsansprüche

entstehen nicht, wenn der Fehler zurückzuführen ist auf Verletzung von Bedienungs-, Wartungs- und Einbauvorschriften, ungeeignete oder unsachgemäße Verwendung,

fehlerhafte oder nachlässige Behandlung und natürlichen Verschleiß sowie vom Besteller oder Dritten vorgenommenen Eingriffen in den Liefergegenstand sowie Schäden

aus sportlichen Einsätzen.

5. Schadenersatzanspruche des Bestellers - aus welchem Rechtsgrund auch immer - insbesondere der Ersatz für verspätete Auslieferung und mittelbare Schäden sind

ausgeschlossen. Dies gilt nicht, soweit uns Vorsatz oder grobe Fahrlässigkeit zur Last fällt.

6. Wir behalten uns das Eigentum an sämtlichen von uns gelieferten Waren bis zur restlosen Bezahlung sämtlicher Forderungen aus unserer Geschäftsbeziehung mit

dem Besteller vor. Veräußert der Besteller die gelieferte Ware weiter, so tritt er hiermit schon jetzt die ihm aus der Veraußerung entstehenden Forderungen gegen seinen

Abnehmer in voller Höhe an uns ab. Übersteigt der Wert unserer Sicherheiten gegen den Besteller (etwaige Eigentumsvorbehalte zuzüglich etwaiger Forderungsabtretun-

gen) unsere Forderung gegen den Besteller, so werden wir auf dessen Verlangen die Sicherheiten, die unsere Forderung übersteigen, freigeben.

7. Bei vom Besteller zu vertretender Falschbestellung ist ANGLO-PARTS bereit, unbeschädigte Artikel zurückzunehmen. Die Rücksendung erfolgt unter Beifügung einer

Rechnungskopie auf Kosten und Gefahr des Bestellers. Eine Rücksendung ist nicht mehr möglich 30 Tage nach dem Rechnungsdatum. Bei Ersatzteilen mit denen ein Ein-

bauversuch unternommen wurde, ist eine Rücksendung ebenfalls ausgeschlossen. ANGLO-PARTS erstattet den Rechnungsbetrag der zurückgesandten Ersatzteile abzüglich

einer Wiedereinlagerungsgebuhr von 15 % des Rechnungsbetrages.

8. Für Ersatzteile die auf Austauschbasis angeboten werden, wird der in der Preisliste neben dem Ersatzteilpreis angegebene Mehrkostenpreis berechnet. Dieser

Mehrkostenpreis wird ganz oder teilweise zurückerstattet, vorausgesetzt der Besteller übersendet auf eigene Kosten und Risiko unter Beifügung einer Rechnungskopie das

entsprechende alte Bauteil komplett, sauber und ölfrei innerhalb von zwei Monaten nach Rechnungsdatum. Bei Rücksendungen aus dem Ausland muß der Besteller eine

Bestätigung beifügen, aus der sein Name, Anschrift das Versendungsdatum sowie eine Beschreibung der Güter hervorgeht. Bei der Rücksendung eines falschen Bauteils

wird nur der jeweilige Stückwert erstattet. Insoweit führt ANGLO-PARTS eine Schätzung durch.

9. Ersatzteile die bei Erteilung des Auftrages nicht lieferbar sind, werden, wenn keine anderslautende Anweisung des Bestellers vorliegt, als Backorder behandelt. Bei

Eintritt der Lieferfähigkeit wird der Besteller in Kenntnis gesetzt. Die entsprechenden Ersatzteile werden für einen Zeitraum von 14 Tagen nach Absendung der Bestätigung

für den Besteller reserviert. Backorders können jederzeit vom Besteller annulliert werden.

10. Als Erfüllungsort fur die Lieferung und Zahlung sowie als Gerichtsstand gilt - sofern der Besteller Kaufmann ist - Wetzlar als vereinbart Darüberhinaus gilt ausschließlich

das Recht der Bundesrepublik Deutschland. Das Übereinkommen der Vereinten Nationen vom 11.04.1980 uber Verträge über den internationalen Warenkauf findet keine

Anwendung.

11 Sollte eine Bestimmung dieser Bedingungen und der von uns mit dem Besteller getroffenen weiteren Vereinbarungen unwirksam sein oder werden, so wird dadu-

rch die Gültigkeit des Vertrages im übrigen nicht berührt. Die Vertragspartner sind verpflichtet, die unwirksame Bestimmung durch eine solche zu ersetzen, mit der der

wirtschaftliche Erfolg der unwirksamen Bestimmung möglichst erreicht wird. Sollten sich aus diesen Allgemeine Verkaufs- und Lieferbedingungen und den Allgemeinen

Informationen Wiedersprüche ergeben, genießen diese Allgemeine Verkaufs und Lieferbedingungen Vorrang.

12. Hinweis gemäß § 33 BDSG: Name und Anschrift des Auftraggebers sowie alle für die Auftragsabwicklung erfoderlichen persönlichen Daten werden ausschließlich

für eigenen geschäftlichen Zwecke in automatisierten Dateien gespeichert und Dritten nicht zugänglich gemacht.

MGF 1996-2002 & MGTF 2002-2005

Allgemeine Verkaufs- und Lieferbedingungen

Page 69: FOR BEST RESULTS DO NOT - Anglo Parts · PDF fileFOR BEST RESULTS DO NOT PRINT THIS PAGE! This page will interfere with the correct page order when printing recto-verso. Quality Parts

66© Van Geste l B&C 2013Quality Par ts & Service

MGF 1996-2002 & MGTF 2002-2005

Informazioni importanteINFORMAZIONI IMPORTANTI

Le condizioni di vendita sono stampate sul retro delle fatture, all’interno dei cataloghi e nei listini prezzi. Se si ordina da noi, il cliente accetta e condivide le nostre condizioni di vendita. Prima di effettuare un ordine siete pregati di leggere attentamente i punti seguenti.

I NOSTRI VENDITORINon sono dei tecnici perciò non sono responsabili di eventuali errori, si consiglia sempre il consulto di un meccanico esperto, se si hanno delle difficoltà, oppure consultare i libri tecnici presenti nei nostri cataloghi. I nostri venditori sono comunque entusiasti di poterla aiutare in ogni modo possibile.

I CATALOGHICi impegniamo da sempre affinché le informazioni presenti all’interno dei nostri cataloghi siano il più possibile corrette; quindi, non siamo responsabili di eventuali imprecisazioni o mancanze sulla descrizione, sul prezzo o sui numeri di codice dei ricambi. Per questo ci riserviamo il diritto di apportare le correzioni necessarie senza preavviso.Le illustrazioni degli articoli sono solo indicative, perciò, possono esserci delle piccole differenze per quanto riguarda la forma, ma la qualità e l’utilizzo restano le medesime.La quantità (QT) scritta affianco al codice articolo si riferisce alla quantità necessaria al restauro di una singola auto; tutti i prezzi si riferiscono alla quantità singola, perciò sono da moltiplicare sempre per la quantità scritta accanto all’articolo; è comunque possibile ordinare la quantità desiderata.I ricambi che non sono disponibili, non sono presenti nei listini prezzi oppure sono marcati NA. Talvolta è comunque possibile trovarli di seconda mano. I prezzi dei nostri ricambi possono cambiare improvvisamente e senza preavviso, dipende dei prezzi di acquisto presso i nostri fornitori. I nostri listini sono I.V.A. compresa. Normalmente tutti i codici si riferiscono all’articolo NUOVO. Talvolta sono presenti delle eccezioni, come: SH: ricambio d’occasione/seconda mano. EX: si tratta di materiale revisionato, per il quale serve il reso del vecchio, altrimenti si deve pagare un sovrapprezzo. NA: Non disponibile. LH: sinistro. RH: destro ( visti dal punto di vista del guidatore). LHD: guida a sinistra. RHD: guida a destra.- A/R: a richiesta (la quantità può variare a seconda dell’applicazione). USE: il numero di articolo è stato sostituito dal numero indicato.

ORDINIAccettiamo ordini via fax, telefono, e-mail, a mezzo posta, internet oppure in negozio; nel caso utilizzate il nostro modulo d’ordine, tenete presente quanto segue: - indicare sempre il vostro codice Cliente (solo se siete già clienti), il nome, l’indirizzo, il numero di telefono, il codice fiscale o il numero di partita I.V.A. per le Ditte; - specificare l’indirizzo per la consegna nel caso fosse diverso da quello di fatturazione; - completare i dati identificativi della vostra vettura: marca, tipo, anno di costruzione, ecc. - usare soprattutto i nostri codici articolo; ciò rende più facile e sicura l’evasione del vostro ordine. - indicare sempre la quantità a voi necessaria e scrivete la descrizione dei ricambi. - indicare la modalità di pagamento; se prevedete l’uso di carta VISA, MASTERCARD, inserite il codice completo (16 cifre), la scadenza e il badge code. Tutti questi dati sensibili vengono inseriti nel nostro sistema computerizzato per la corretta evasione dell’ordine; modificare un ordine già inviato provoca grave disordine nei nostri sistemi causando la possibilità di sbagliare e ritardare l’evasione dell’ordine stesso. Perciò vi chiediamo di controllare bene tutti i dati prima di trasmetterli: ci aiuterà a fornirvi i ricambi nei modi e nei tempi corretti. Certi della vostra collaborazione vi ringraziamo.

PAGAMENTICarta di credito: al momento, accettiamo esclusivamente carta di credito del circuito VISA, MASTERCARD. Siete pregati di indicare correttamente il numero di 16 cifre, la scadenza, il badge code ed il nome del “titolare” della carta.Bonifico Bancario: Vi invieremo, via fax o via mail, la copia della fattura, quindi provvederete a fare il bonifico immediatamente inviandoci copia dello stesso, sarà nostra premura spedire il materiale non appena arrivato il pagamento.Contrassegno: Pagamento in CONTANTI o assegno circolare al corriere. Solo su nostra autorizzazione potete lasciare un assegno bancario.

SPEDIZIONEEffettuiamo solo spedizioni Nazionali, utilizzando il corriere espresso. La consegna viene effettuata in 24h/48h. I costi del trasporto e dell’imballaggio vengono conteggiati in fattura, essi variano in base al volume del pacco. Il contrassegno prevede un costo aggiuntivo per i diritti d’incasso del corriere. Cerchiamo di imballare il materiale nel modo migliore al fine di evitare rotture o danni: tuttavia, nel caso dovesse succedere, Anglo Parts SRL non si ritiene responsabile di spedizioni danneggiate o perse durante il trasporto. Il cliente dovrà dare comunicazione scritta entro tre giorni dal ricevimento della merce. Nel caso di problemi, tutto il materiale di imballaggio deve essere conservato per l’eventuale verifica. Il materiale fragile (parabrezza,parti in vetro,etc) viene da noi assicurato.

RICEVIMENTO DELLA MERCESiete pregati di verificare, al ricevimento della merce, che i sigilli, il nastro adesivo e la confezione non siano rotti o manomessi. In caso di danneggiamento o perdita del materiale: firmate con riserva al corriere, conservate la copia del documento di trasporto/fattura, presentate immediatamente un reclamo al trasportatore e metteteci a conoscenza dell’accaduto. Conservate in ogni caso l’imballo finché i problemi non saranno stati risolti. Verificate immediatamente se avete ricevuto tutto il materiale ordinato e se tutti i pezzi meccanici funzionano. Non aspettate di verificare i pezzi al momento del montaggio e, in caso di difetti o errori, scriveteci entro tre giorni dal ricevimento della merce.

GARANZIAAnglo Parts si impegna a comprare solo dai fornitori migliori, controllando nel limite del possibile tutti i ricambi, ma talvolta vi consigliamo di fare un ultimo controllo prima del montaggio. Soprattutto bisogna verificare che i pezzi meccanici siano in perfetto stato. Il periodo di garanzia inizia dalla data di fatturazione e non dalla data del montaggio. I nostri ricambi hanno una garanzia limitata al valore del pezzo, quindi eventuali reclami comportano solo la sostituzione del pezzo difettoso o la restituzione del solo valore dell’articolo. La Garanzia non copre i costi del montaggio, del trasporto, di danni conseguenti al difetto del pezzo, di un montaggio scorretto e di pezzi che vengono usati per competizioni o rally. Nel caso di reclami coperti da garanzia, i pezzi devono essere restituiti al negozio; a tal proposito tenete presente che: il valore deve essere maggiore di 7,5 Euro, tutti i pezzi devono essere rispediti puliti e ben imballati. Una volta ricevuti i pezzi Anglo Parts SRL verifica se si tratta di un difetto di fabbrica oppure se è dovuto ad un montaggio scorretto. I pezzi danneggiati dal trasporto o nell’imballo non vengono presi in considerazione.

RISPEDIZIONEAccettiamo resi di materiale, solo se autorizzati, entro e non oltre 10 giorni dal ricevimento della merce. Se la restituzione è dovuta ad un errore di ordinazione da parte vostra, viene detratto dal costo dell’articolo il 15%, quale copertura di costi generali (valore minimo articolo 7,5Euro).Non vengono accettati resi di materiale che siano stati anche parzialmente montati! I costi del trasporto e dell’imballaggio non vengono MAI restituiti.

SUPPLEMENTOAlcuni ricambi vengono forniti rigenerati (rebuilt), in essi grava un sovrapprezzo (surcharge); questo sovrapprezzo verrà restituito solo dopo aver ricevuto il vecchio ricambio. Al ricevimento da parte nostra dei pezzi verificheremo immediatamente se è possibile riaccreditare il sovrapprezzo da voi pagato. La spedizione del vecchio ricambio è a carico vostro.

BACKORDERS / ORDINI ARRETRATII prodotti che non abbiamo disponibili al momento dell’ordine, vengono messi in “backorder”; Ciò significa che non appena il ricambio sarà disponibile presso la nostra sede, provvederemo a comunicarvelo a mezzo posta. Tale ricambio viene tenuto in prenotazione per voi per una durata di 15 giorni a partire dal giorno di spedizione della lettera postale da parte nostra. NEL CASO NON RICEVESSIMO vostre notizie entro questo tempo, il pezzo potrà essere venduto a qualsiasi altro cliente. Se ordinate tramite modulo d’ordine o tramite internet potrete specificare se vorrete o meno ricevere gli articoli non evasi. Nel caso un pezzo in “backorder” non fosse più disponibile, vi verrà comunicato.

Page 70: FOR BEST RESULTS DO NOT - Anglo Parts · PDF fileFOR BEST RESULTS DO NOT PRINT THIS PAGE! This page will interfere with the correct page order when printing recto-verso. Quality Parts

67© Van Geste l B&C 2013 Quality Par ts & Service

PUNTOS IMPORTANTES Las políticas de nuestra empresa se encuentran en el reverso de nuestras factures y en la web. Las actualizaciones están impresas en nuestros catálogos más recientes, en las listas de precios y en la web. Cuando nos realiza un pedido usted está aceptando dichas poíticas. Uste siempre es libre de consultarnos sobre la publicación de alguna actualización. Las más recientes prevalecerán sobre todas las anteriores. Por favor lea abajo los puntos más importantes.

NUESTROS VENDEDORES No somos técnicos cualificados sobre automóviles y no podemos hacernos responsables de errores dichos o escritos, somos entusiastas a los que les gusta ayudar. Para información técnica, les recomendamos que utilicen los libros listados en los catálogos.

NUESTROS CATÁLOGOS/WEB Hemos realizado todos los esfuerzos para asegurar que la información introducida en nuestros catálogos y nuestra web, es correcta. No podemos hacernos responsables si algún error o inexactitud existe en la especificación, la fijación de precios o el número de referencia. Tenemos el derecho de corregir cualquier error. Las ilustraciones y fotos en nuestros catálogos y en nuestra web solo son representaciones, los productos pueden variar de las fotos y las ilustraciones, pero la función es la misma con una calidad similar.

NUESTRAS REFERENCIAS Y PRECIOS Todos los recambios ( o kits de recambios )tienen nuestra propia referencia y se refieren a un solo punto. LA CANTIDAD REQUERIDA (“QTY”) corresponde a la cantidad utilizada para la aplicación en particular. La cantidad que usted pida puede ser diferente y pudo ser marcada cuando usted la solicitó. No hay recambios nuevos disponibles, podría estar disponible de segunda mano. Estos recambios de segunda mano no siempre están listados en la web o en nuestra lista de precios. La información le será enviada cuando la solicite. Los precios listados en la web o en la lista de precios son para un solo punto y podrán ser variados sin previo aviso. Los precios en la web los podrá ver con o sin IVA, dependiendo de lo que elija. Las listas de precios enviadas con los catálogos pueden incluir, o no, el IVA, el porcentaje se indica en cada lista de precios. Las referencias se componen de seis caracteres. Los tres primeros caracteres indican la naturaleza del recambio. Por ejemplo 161 hace referencia a los piñones, 162 para tornillos, 163 para arandelas, etc. La condición de llos recambios que vendemos está especificada en la web y en la lista de precios. La totalidad de los códigos aparece en la web, en el listado de catálogo de recambios y en la lista de precios suministrada con los catálogos, al lado de el número, para los recambios que son…SH – Second Hand (Segunda Mano), EX - suministrados sobre una base de intercambio, y una sobretasa será facturada, NA – Actualmente no disponible, LH – Left Hand (mano Izquierda) o RH – Right Hand (mano derecha). Siempre visto desde el asiento del conductor. LHD – Left Hand Drive (Unidad Izquierda), RHD – Right Hand Drive (Unidad derecha), A/R – As Requested (como lo solicitó), quiere decir que la cantidad solicitada puede variar de una aplicación a otra. USE – La referencia se reemplazó por otra indicada.

PEDIDOS Recibimos los pedidos a través de la web, e-mail, fax, carta, teléfono o visitando una sucursal de Anglo Parts. Para los pedido que no sean a través de la web, les agradeceremos los preparen utilizando los formularios. - Su NÚMERO DE CLIENTE. Nombre, dirección, número de teléfono casa/trabajo, número de fax, codice fiscale (para clientes italianos) o número de IVA para compañías europeas. –Especificar si la dirección de entrega es diferente. - INFORMACIÓN DEL TIPO DE COCHE, marca, modelo, año de fabricación, etc. - Solo denos la referencia de Anglo Parts - Indique la cantidad deseada y la descripción del recambio. - Indique el método de pago: VISA, MASTER CARD, EURO CARD, o pago por ingreso en cuenta. - Una vez realizado el pedido, ponemos el mismo en el sistema informático y procesamos lables, listas y listas de control. Cambiar un pedido realizado, esto causa retrasos en el sistema, le agradeceremos que revise su pedido antes de enviarlo. Esto no ayudará a entregar sus recambios a tiempo. Gracias por su comprensión.

PAGOS TARJETAS DE CRÉDITO: En este momento aceptamos las siguientes tarjetas de crédito: VISA, MASTER CARD, EURO CARD. Por favor especifique el número de tarjeta de crédito (máximo 16 cifras), fecha de caducidad y nombre, tal como aparece en la tarjeta. BANCO: Cuando su mercancía esté recogida, empaquetada en cajas, pesada y medida, se hará la factura y le informaremos del total a pagar, el número de factura (no por la web) y los datos de nuestro banco. Por favor indique el número de factura y el número de cliente con cualquier pago que haga.

ENVÍO NACIONAL: Entregamos de puerta a puerta y la mercancía, incluyendo el transporte, se pagarán en el momento de la entrega. C.O.D: si no se utilizó una tarjeta de crédito INTERNACIONAL: Envíamos por UPS prepagado, en paquetes pequeños. El único coste que debe ser pagado a la recepción pueden ser sus impuestos locales. Para paquetes más

grandes utilizamos otro tipo de transporte más rápido y sencillo. Anglo Parts empaqueta sus cajas perfectamente, con lo que la posibilidad de que el material sufra daños es muy pequeña, aún así estas deben ser notificadas. Anglo Parts no se puede hacer responsable de los materiales que se pierdan o se dañen durante el transporte. Por faltas o daños realizados por el transporte, las reclamaciones deben notificarse como máximo tres días después de la recepción del pedido. Todos los materiales del embalaje deben mantenerse. El transporte de cristales no es asegurable y será enviado por su cuenta y riesgo.

RECIBIENDO SUS MATERIALES Para todos los envíos, a la llegada, por favor compruebe que ningún sello o cinta esté rota y que el paquete no esté dañado. En caso de algún daño o falta, escriba esto en la hoja del repartidor de acuerdo con la situación actual y la cantidad contenida antes de firmar el transporte o la factura. Haga una copia, adjúntela a la factura y realice, inmediatamente, una reclamación a la compañía transportista. En cualquier caso, guarde el material del embalaje hasta que todo se resuelva. Anglo Parts chequea las mercancías cuando se recogen desde el stock y otra vez cuando se empaqueta, pero la última revisión la debe hacer el mismo cliente cuando las recibe. Asegúrese de que los recambios recibidos coinciden con los que solicitó y de que funcionan correctamente. No espere a hacer el control de las mercancías hasta que las necesite e infórmenos de los problemas antes de tres días desde la recepción.

GARANTÍA Casi todos los recambios para la industria de coches clásicos se realizan en pequeñas cantidades por compañías que están dispuestas a hacerlos por un precio aceptable. En Anglo Parts revisamos dichos recambios para su aprobación, pero no somos capaces de revisar cada una de ellas. Es responsabilidad del cliente realizar una revisión final del recambio antes de su colocación. Especialmente se deben revisar los recambios mecánicos para asegurarse de que funcionan perfectamente. El periodo de garantía empieza desde la fecha de factura, no desde la de instalación. Nuestros recambios tienen, normal y razonablemente, garantía, pero las reclamaciones por garantía se efectuaran dependiendo del valor de los componentes y no cubrirán el trabajo, transporte, fallos del componente, fallos producidos por la instalación defectuosa o recambios utilizados para ralis o competiciones. Todos los productos para la reclamación de garantía, deben ser devueltos a la tienda donde los compró mediante los siguientes procedimientos: el valor debe ser superior a 7,5 euros; el material debe ser enviado con las tasas y los portes pagados; todos los materiales deben ser devueltos limpios y bien empaquetados. Una vez usted, o terceras personas, hayan desempaquetado el recambio, nuestra responsabilidad termina! Anglo Parts tomará la decisión final de si el recambio es defectuoso o se ha dañado durante la instalación. Investigaremos este suceso una vez hayamos recibido de vuelta el material sin daños. Durante la devolución estos materiales no pueden ser dañados debido al transporte o un mal embalaje. El periodo de garantía para recambios reacondicionados es de 6 meses y de 4 para amortiguadores reconstruidos, las demás piezas están garantizadas contra defectos en el material y la mano de obra del fabricante original o por Anglo Parts NV por un periodo de un año a partir de la fecha de factura.

DEVOLUCIONES Si usted recibió una pieza equivocada, y el fallo es suyo, nosotros estamos dispuestos a reponerla y reembolsaremos el precio del material menos el 15% de recargo por reposición. No se aceptará ninguna devolución sin su copia de la factura, pasados 30 días de la fecha de factura, cojinetes, pistones, aros de pistón, mercancías por metro, partes recortables (capuchas, tapas blandas, cubre tonel, kits de asiento, paneles, etc.) libros o cualquier pieza donde se intentara su instalación. Los materiales deben ser enviados con las tasas y los portes pagados. Anglo Parts no es capaz de devolver las tasas pagadas en el país de llegada, los cargos por transportes o empaquetado ni las comisiones que tuvo que pagar a la compañía de la tarjeta de crédito. Usted puede utilizar el imoporte de esta factura para un futuro pedido del mismo importe. No devolvemos el importe de los créditos.

SOBRECARGO – CORE DEPÓSITOS Un sobrecargo se añadirá en el precio para piezas ofrecidas sobre bases de intercambio. El precio del sobrecargo lo podrá ver en la web en el listado de catálogos de recambios y está listado en nuestra lista de precios al lado de la referencia relacionada y será facturado en espera del retorno de la unidad reciclable antigua. Este sobrecargo se reembolsará en su totalidad siempre que recibamos la unidad completa, limpia, sin aceite y devuelta después de dos meses de nuestra fecha de factura. Todas las devoluciones se realizarán con los cargos por transporte pagados. Si usted nos exporta la antigua unidad, nos debe enviar una carta con su nombre, dirección, teléfono, fecha de envío y una descripción del material que nos está devolviendo, incluyendo el importe del sobrecargo. Por favor haga algunas copias y adjunte una en el paquete, una en el embalaje y guarde una para usted. Necesitaremos esta información para exportar el material. En cuanto llegue revisaremos, inmediatamente, los siguientes puntos: que el embalaje sea correcto y no haya sufrido ningún daño durante el transporte, que la unidad antigua es similar al tipo de la que nosotros le enviamos (correcto original), que la unidad esté completa y estén las partes esenciales para su reconstrucción. Por favor, no nos envíe un motor de limpiaparabrisas de MGA para cambiar con un de TD, no nos mande una distribución sin el sistema de avanzado. En este último la muestra le devolveremos el recargo por el distribuidor menos el valor (en nuestra opinión) del sistema de avanzado.

BACKORDERSLOS Materiales que no estén en stock cuando realice su pedido se guardarán como back orders. Nosotros le informaremos cuando estos materiales estén disponibles de nuevo y se los reservaremos por un periodo de catorce días a contar desde el momento en el que le informamos. Si usted no se pone en contacto con nosotros durante ese periodo de tiempo, pondremos el recambio en nuestro stock para que pueda ser vendido a otros clientes. Al realizar un pedido usted también puede especificar que no quiere Back Orders o solicitar la cancelación de los Back Orders anteriores. Cuando un recambio que usted tiene en back order pasa a ser obsoleto, se lo haremos saber. Si usted decide coger esta pieza en condición de usada, pregúntenos y haremos todo lo posible para obtenerla.

MGF 1996-2002 & MGTF 2002-2005

Información Importante

Page 71: FOR BEST RESULTS DO NOT - Anglo Parts · PDF fileFOR BEST RESULTS DO NOT PRINT THIS PAGE! This page will interfere with the correct page order when printing recto-verso. Quality Parts

68© Van Geste l B&C 2013Quality Par ts & Service

DŮLEŽITÉ BODYVšeobecné podmínky naší firmy jsou vytištěny na zadní straně našich faktur a jsou k dispozici na našich webových stránkách. Aktualizace jsou vytištěny v posledních verzích katalogů a ceníků. Jsou obnovovány i na webových stránkách. V případě, že si u nás objednáte zboží, znamená to, že souhlasíte s našimi podmínkami. Poslední aktualizace jsou nadřazeny všem ostatním. Prosím, přečtěte si níže uvedené důležité body.

NAŠI PRODEJCINejsme vyučení automechanici a nemůžeme být zodpovědný za chyby, které řekneme nebo napíšeme, jsme nadšenci, kteří chtějí pomoci. Pro technické informace doporučujeme využít knihy vyobrazené v našem katalogu.

NAŠE KATALOGY/ WEBOVÉ STRÁNKYSnažíme se vynaložit maximální úsilí, aby informace v našich katalozích a na webových stránkách byly správné. Nemůžeme nést odpovědnost v případě, že se objeví ve specifikaci, ceně nebo katalogovém čísle chyba. Máme právo opravit jakoukoliv chybu. Ilustrace a fotky v našich katalozích a na našich webových stránkách jsou pouze Ilustrativní, dodávané produkty se mohou lišit od ilustrací a fotek, ale budou fungovat stejným způsobem a budou v podobné kvalitě.

NAŠE KATALOGOVÁ ČÍSLA & CENYNaše díly (nebo sety dílů) mají vlastní katalogové číslo, které náleží pouze jedné položce. POŽADOVANÉ MNOŽSTVÍ (QTY) uvádí množství potřebné pro danou aplikaci. Množství, které chcete objednat se může lišit a mělo by být uvedeno při Vaší objednávce. Díly, které nejsou dostupné jako nové, mohou být dostupné pouze použité a zrenovované. Tyto second hand díly nejsou vždy uváděny na našich webových stránkách a v cenících. Informace Vám budou zaslány na základě Vašeho požadavku. Ceny na webových stránkách a v cenících jsou uváděny za jeden kus a jsou pouze informativní. Mohou být kdykoliv bez oznámení změněny. Ceny na webových stránkách jsou k vidění jak bez, tak i včetně DPH. (21% - belgická sazba DPH). Ceník dodávaný s katalogy může osahovat ceny jak s DPH, tak i bez DPH. Lokální sazba DPH je vždy uvedena v každém katalogu. Katalogová čísla se skládají ze 6 číslic. První tři číslice uvádí druh dílů. Např. 161 signalizuje matky, 162 šrouby, 163 podložky atd. Stav dílu, které prodáváme je indikován na webových stránkách a v cenících. Následující kódy se objevují na webových stránkách a v cenících vedle katalogového čísla. Pro díly … SH - second hand díl, EX - díl dodán na základě výměny a SURCHARGE (příplatek) bude fakturována. NA - díl je nedostupný, LH - levá strana, RH - pravá strana. Vždy bráno z pohledu řidičova sedadla. LHD - levostranné, RHD - pravostranné, A/R - dle požadavku, znamená, že požadované množství se může lišit dle požadavku. USE - katalogové číslo bylo nahrazeno jiným katalogovým číslem.

OBJEDNÁVKYObjednávky jsou vítány přes webové stránky, e-mail, fax, dopis, telefon nebo při návštěvě pobočky společnosti Anglo-Parts. Pokud neobjednáváte přes webové stránky, prosíme abyste si připravili následující informace na našem OBJEDNACÍM FORMULÁŘI. - Vaše ZÁKAZNICKÉ ČÍSLO, jméno, adresu, tel. číslo, event. fax. číslo, event. DIČ. Prosím uveďte jinou adresu pokud se liší od fakturační adresy. - INFORMACE O VOZE, značka, model, rok výroby atd. - Uveďte katalogové číslo společnosti Anglo Parts - Uveďte potřebné množství a popis dílu - Uveďte metodu platby: VISA, MASTER CARD, EURO CARD nebo platbu předem bankovním převodem. - Je-li jednou objednávka potvrzena, zadáváme ji ihned do počítače a připravujeme faktury atd. V případě, že chcete opravit objednávku, musíme ji opravit v celém systému a to způsobuje časová zpoždění. Proto Vás žádáme, abyste si raději překontrolovali Vaší objednváku než ji odešlete. Tak nám pomůžete dodat díly včas. Děkujeme za pochopení.

PLATBAKREDITNÍ KARTY: v současné době akceptujeme tyto karty: VISA, MASTER CARD, EURO CARD. Prosím, zadejte 16-ti místné číslo Vaší karty, datum expirace a jméno uvedené na platební kartě.BANKA: Poté co bude zboží zabaleno do krabic, zváženo a změřeno, připravíme fakturu a informujeme Vás a o celkové částce, čísle faktury a naše bankovní spojení.

POŠTOVNÉNárodní: Dodáváme naše zboží až k Vaším dveřím. Většinou formou dobírky.Mezinárodní: Používáme UPS pro malé balíky. Cena dopravného je vždy uvedena na faktuře. Jediné, co budete muset uhradit při dodání dílů je clo ( v případě, že se nacházíte mimo

prostor Evropské Unie) Pro rozměrné nebo velké balíky využíváme ekonomické metody. Anglo Parts balí své zboží velmi důkladně, aby riziko poškození dílů bylo co nejmenší. Anglo Parts nenese odpovědnost v případě, že se zboží poškodí nebo ztratí v průběhu dopravy. V případě, že na vině není dopravce, námitka musí být vznesena během 3 dnů od dne obdržení zboží. Všechny obaly zboží musí zůstat neporušené. Doprava skel není pojistitelná a toto zboží bude dopravováno na vlastní nebezpečí.

OBDRŽENÍ ZBOŽÍPři převzetí zboží zkontrolujte, zda žádné páska není porušená a zda balík není poškozen. V případě poškození napište tento poznatek do poznámek dopravce před tím než balík převezmete. Nechte si kopii tohoto zápisu spolu s fakturou a ihned vzneste požadavek na dopravní společnost. Uschovejte si balicí materiál jako důkaz dokud nebude vše vyřešeno. Anglo Parts kontroluje zboží při vyjmutí ze skladu a dále pak při balení. Finální kontrolu musí ale provést zákazník. Zkontrolujte, prosím, zda díly souhlasí s díly, které jste si objednali. Nečekejte do té doby než budete díl potřebovat, ale ozkoušejte ho ihned a v případě problému vzneste námitku do 3 dnů.

ZÁRUKASkoro většina dílů pro historická vozidla jsou vyráběny v malých objemech společnostmi, které jsou ochotny tento díl vyrábět a prodávat za přijatelnou cenu. My v Anglo Parts kontrolujeme kvalitu zboží, ale nejsme schopni kontrolovat jednotlivé kusy. Je odpovědností každého zákazníka provést finální kontrolu dílů před instalací. Záruka začíná dnem vystavení faktury, ne dnem instalace. Na naše díly se vztahuje běžná záruka a námitky se vztahují pouze do výše daného komponentu. V žádném případě se nevztahuje na práci, dopravu, selhání dalších komponentů, selhání z důvodů špatné instalace a dále se nevztahuje na díly, které byly použity pro závody. Všechny reklamované díly musí být doručeny zpět do obchodu, ve kterém jste je pořídili. Cena dílů musí být větší než 7,5 euro, díly musí být zaslány zpět včetně zaplacení dopravy a event. cla. Všechny díly musí být zaslány očištěné a dobře zabalené, v případě, že Vy nebo třetí osoba díl rozebrala, záruka na díl již nepřetrvává. Anglo Parts udělá finální rozhodnutí, zda byl díl přirozeně vadný nebo zda byl poškozen během instalace. Během navrácení dílů by neměly být díly poškozeny špatným balením. Záruka na zrenovované díly je omezena 6 měsíci a 4 měsíci na zrenovované tlumiče. Ostatní díly jsou v záruce proti defektu na materiálu či dílenském zpracování výrobcem nebo Anglo Parts nv v délce trvání jednoho roku, začínající dnem fakturace.

VRATKAV případě, že obdržíte nesprávný díl a chyba je na Vaší straně, jsme ochotní přijmout zboží zpět na sklad s 15% poplatkem. Žádné vratky nebudou provedeny bez Vaší faktury nebo její kopie. Nebudou akceptovány vratky na ložiska, písty, pístní kroužky, zboží prodávané na metry, čalounické zboží (střechy, krycí plachty, kity sedadel atd) Zboží musí být vráceno se zaplacenými náklady na dopravu a clo. Anglo Parts není schopná platit clo v zemi příjemce, náklady na dopravu, balné a komisní poplatky, které musí odvádět poskytovateli terminálu platebních karet.

PŘÍPLATEKPřirážka bude přidána k ceně dílů nabízených na základě výměnné báze. Výše příplatku je k vidění na webových stránkách nebo v cenících a bude fakturována až do doby návratu starého opravitelného dílu. Tato přirážka bude vrácena v případě, že díl bude kompletní, čistý, zbavený oleje a vrácen do dvou měsíců od data fakturace. Prosíme také o poskytnutí fotokopie Vaší faktury. Všechny vratky musí být poslány zpět k nám s předplaceným poštovným. V případě, že nám zasíláte svůj starý díl, měl by být přiložen dopis s Vaším jménem, adresou, datem zaslání, tel. číslem, popisem zboží a výší vratky. Prosíme o více kopií, jednu vložte do balíku, jednu nalepte na balík a jednu si nechte pro sebe. Budeme tyto informace potřebovat. Ihned po obdržení Vašeho balíku zkontrolujeme stav balení, zda nedošlo k poškození během transportu, zda je díl kompletní a zda je díl opravitelný. Prosím, nezasílejte nám motorek stěračů na MGA na výměnu za MGTD atd. V tomto případě bude vratka snížena oproti původní výši.

ZPĚTNÁ ZÁVAZNÁ OBJEDNÁVKAZboží, které není skladem v čas Vaší objednávky bude vedena jako zpětná závazná objednávka (backorder). Budeme Vás informovat o tom, kdy dané zboží bude opět dostupné a dané díly pro Vás budou rezervovány po dobu 14 dní ode dne, kdy budete informováni. V případě, že nás nebudete kontaktovat během této periody, zařadíme tento díl( tyto díly) zpět do skladu pro ostatní zákazníky. Při objednávkách dílů můžete specifikovat „Žádné zpětné objednávky“ nebo nás můžete požádat abychom ukončili všechny Vaše zpětné závazné objednávky. Když se Vámi objednaný díl stane úplně nedostupným, budeme Vás informovat. V případě, že se rozhodnete pro použitý díl, prosím, informujte nás a my se ho pokusíme pro Vás sehnat.

MGF 1996-2002 & MGTF 2002-2005

Důležité informace

Page 72: FOR BEST RESULTS DO NOT - Anglo Parts · PDF fileFOR BEST RESULTS DO NOT PRINT THIS PAGE! This page will interfere with the correct page order when printing recto-verso. Quality Parts

69© Van Geste l B&C 2013 Quality Par ts & Service

MGF 1996-2002 & MGTF 2002-2005

Ważne informacjeWAŻNE

Ogólne zasady naszej działalności są drukowane na odwrocie każdej faktury oraz są dostępne na naszej stronie internetowej. Wszelkie aktualizacje są zamieszczane w najnowszych katalogach, a cenniki są aktualizowane na naszej stronie internetowej. Zamawiając towary w Anglo Parts, wyrażasz zgodę na oraz akceptujesz zasady obowiązujące w naszej firmie. Zawsze możesz zwrócić się do nas w celu uzyskania aktualnego wydania. Najbardziej aktualne wydanie zastępuje wszystkie poprzednie publikacje. Prosimy o przeczytanie najważniejszych informacji znajdujących się poniżej.

NASI SPRZEDAWCYNie jesteśmy wyspecjalizowanymi technikami samochodowymi i nie ponosimy odpowiedzialności za błędy popełnione w naszych wypowiedziach ustnych lub pisemnych - jesteśmy entuzjastami, którzy chcą udzielić pomocy. W celu zdobycia informacji technicznych, zalecamy zapoznanie się z książkami wymienionymi w niniejszym katalogu.

NASZE KATALOGI/STRONA INTERNETOWADokładamy wszelkich starań, aby informacje umieszczane w naszych katalogach oraz na stronie internetowej były poprawne. Nie ponosimy odpowiedzialności za jakiekolwiek błędy lub nieścisłości pojawiające się w specyfikacjach, cennikach lub numerach części. Mamy prawo do poprawiania jakichkolwiek błędów. Ilustracje oraz zdjęcia umieszczane w naszych katalogach oraz na stronie są jedynie podobiznami, a dostarczane produkty mogą różnić się od ilustracji lub zdjęć, jednak będą działać w taki sam sposób i będą podobnej jakości.

NASZE NUMERY CZĘŚCI ORAZ CENYWszystkie części ( lub zestawy części ) posiadają nasz numer, który odnosi się tylko do jednej sztuki towaru. WYMAGANA ILOŚĆ (“ILOŚĆ”) oznacza ilość używaną w danym zastosowaniu. Ilość, którą zamawiasz może być inna i powinna być zaznaczona w momencie składania zamówienia. Części, które nie są dostępne jako nowe, mogą być dostępne jako używane. Części używane nie zawsze są umieszczane na stronie oraz w cennikach. Taka informacja zostanie przesłana na życzenie Klienta. Ceny zamieszczone na naszej stronie oraz w cennikach dotyczą jednej sztuki towaru oraz są zamieszczane jedynie w celach informacyjnych i podlegają zmianie bez uprzedniej informacji. Ceny zamieszczone na stronie internetowej są dostępne z podatkiem lub bez podatku VAT (21 %), zgodnie z wybraną opcją. Cenniki dostarczane wraz z katalogami mogą zawierać lub nie zawierać lokalny podatek VAT, przy czym wartość procentowa jest podana w każdym cenniku. Numery części składają się z sześciu znaków. Pierwsze trzy znaki wskazują rodzaj części. Na przykład, 161 oznacza nakrętkę śruby, 162 śrubę, a 163 podkładkę. Stan części, którą sprzedajemy jest podany na stronie internetowej lub w cenniku. Następujące kody pojawią się na stronie internetowej w spisie części dostępnym w katalogu oraz w cennikach dostarczanych razem z katalogami, obok numeru części: SH - Używane, EX - Dostarczone na ZASADZIE ZAMIANY, a na fakturze zostanie doliczona DODATKOWA OPŁATA. NA - obecnie NIEDOSTĘPNE. LH - lewa strona lub RH - prawa strona. Zawsze od strony kierowcy. LHD - kierownica z lewej strony, RHD - kierownica z prawej strony, A/R - WEDLE ŻYCZENIA, co oznacza, że wymagana ilość może się różnić w każdym zamówieniu. USE - numer części został zastąpiony innym wskazanym numerem części.

ZAMÓWIENIAPrzyjmujemy zamówienia przez STRONĘ INTERNETOWĄ, E-MAIL, FAKS, LISTOWNIE, TELEFONICZNIE lub przez osobiste odwiedzenie filii Anglo-Parts. Przy zamówieniach nie składanych przez naszą Stronę, prosimy o przygotowanie następujących informacji, przy użyciu naszego FORMULARZA ZAMÓWIENIA. - Twój NUMER KLIENTA, imię, adres, numer telefonu (praca/dom), numer faksu, codice fiscale (jedynie w przypadku obywateli Włoch) lub numeru VAT, w przypadku firm europejskich. - Prosimy o informację, jeśli adres do wysyłki jest inny od powyższego. - INFORMACJA O TYPIE SAMOCHODU tj. marka, model, rok produkcji itd. - Prosimy o podanie jedynie NUMERÓW CZĘŚCI Anglo Parts. - Prosimy o wskazanie ilości oraz opisu zamawianych części. - Prosimy o wskazanie metody płatności: VISA, MASTER CARD, EURO CARD lub płatność z góry za pośrednictwem banku. - Po złożeniu zamówienia, zostaje ono wprowadzone do systemu komputerowego i rozpoczyna się przetwarzanie oznaczeń, spisów oraz list kontrolnych. Zmiana uprzednio złożonego zamówienia, wstrzyma cały system, co automatycznie powoduje opóźnienia. Z tego powodu prosimy o ponowne sprawdzanie zamówienia przed wysłaniem go do nas. Pomoże nam to dostarczyć części na czas. Z góry dziękujemy za zrozumienie.

PŁATNOŚCIKARTY KREDYTOWE: W momencie sporządzania regulaminu, akceptujemy następujące karty kredytowe: VISA, MASTER CARD, EURO CARD. Prosimy o podanie numeru karty (zazwyczaj 16 znaków ), datę końca ważności karty oraz imię posiadacza karty. BANK: Faktura zostanie sporządzona po tym, jak towar zostanie wybrany, zapakowany, zważony oraz zmierzony, po czym poinformujemy Cię o łącznej kwocie do zapłaty (Nie w przypadku Strony internetowej) oraz referencjach bankowych. Przy jakichkolwiek płatnościach, prosimy o zwrócenie uwagi na numer faktury oraz numer klienta.

PRZESYŁKAKRAJOWA: Dostarczamy towar do Klienta, a płatność wraz z kosztami przesyłki zostanie uregulowana w gotówce przy odbiorze, jeśli nie użyto karty kredytowej. MIĘDZYKRAJOWA: Przy niewielkich przesyłkach korzystamy z usług UPS przy płatności z góry. Wówczas jedynym kosztem pokrywanym przy odbiorze jest lokalny PODATEK. Przy dużych i ciężkich przesyłkach korzystamy z ekonomicznych i szybkich metod transportu. ANGLO PARTS przygotowuje przesyłki z należytą starannością, a ryzyko otrzymania uszkodzonego towaru jest bardzo niewielkie, jednak należy wziąć pod uwagę, co następuje. Anglo Parts nie ponosi odpowiedzialności za towary zagubione lub uszkodzone podczas tranzytu. W przypadku reklamacji dotyczących braków lub uszkodzeń, które nie zostały spowodowane przez przewoźnika, reklamacja musi zostać złożona w ciągu trzech dni od daty otrzymania zamówienia. Należy zachować wszystkie elementy opakowania. Przewóz szkła nie jest objęty ubezpieczeniem i będzie przewożony na własne ryzyko.

ODBIÓR TOWARUW przypadku wszystkich przesyłek dostarczanych do Klienta, prosimy o sprawdzenie, czy żadna plomba lub taśma nie jest przerwana oraz czy opakowanie nie jest uszkodzone. W przypadku jakichkolwiek uszkodzeń lub braków, prosimy o wpisanie takiej informacji w formularzu przewoźnika zgodnie ze stanem faktycznym przesyłki oraz ilością towaru PRZED podpisaniem listu przewozowego lub potwierdzenia odbioru. Zatrzymaj kopię dokumentu wraz z fakturą i niezwłocznie złóż reklamację w firmie transportowej. W każdym przypadku zachowaj opakowanie do momentu wyjaśnienia sprawy. Anglo Parts sprawdza części w momencie ich odbioru z magazynu oraz ponownie w czasie pakowania, jednak ostateczna kontrola musi zostać przeprowadzona przez samego Klienta w momencie dostawy. Upewnij się, że otrzymane części są zgodne z zamówieniem oraz, że części mechaniczne działają poprawnie. Nie zwlekaj ze sprawdzeniem towaru do momentu, kiedy będziesz go potrzebował i zgłoś problemy w ciągu trzech dni od momentu otrzymania towaru.

GWARANCJAPrawie wszystkie części w branży klasycznych samochodów są produkowane w małych ilościach przez firmy, które pragną dostarczać części w rozsądnych cenach. W Anglo Parts sprawdzamy towary, z możliwością ich zwrotu, jednak nie jesteśmy w stanie sprawdzić każdego produktu. To użytkownik ponosi odpowiedzialność za ostateczną kontrolę części PRZED jej zamontowaniem. W szczególności części mechaniczne muszą być sprawdzone, aby upewnić się, że są w stanie idealnym. Okres gwarancji obowiązuje od daty wystawienia faktury, nie od daty instalacji. Nasze części są objęte standardową i rozsądną gwarancją, jednak reklamacje ograniczają się do wartości części i w żadnym wypadku nie będą pokrywały kosztów robocizny, transportu, uszkodzenia powiązanych części, uszkodzenia wynikającego z niepoprawnej instalacji lub wartości części użytych do rajdów lub konkursów. Wszystkie produkty reklamowane w ramach gwarancji muszą zostać zwrócone do punktu sprzedaży, w którym dokonałeś zakupu zgodnie z następującą procedurą: wartość musi przekraczać 7,5 euro, towar musi zostać odesłany po uprzednim pokryciu kosztów przesyłki oraz podatków, wszystkie zwracane części muszą być czyste i należycie pakowane, jeśli Klient lub jakakolwiek osoba trzecia rozmontowała część, wówczas nie ponosimy żadnej odpowiedzialności. Anglo Parts ostatecznie zadecyduje, czy przedmiot posiadał wadę fabryczną, czy został uszkodzony podczas instalacji. Zajmiemy się reklamacją, jeśli zwrócone towary dotrą do nas w nienaruszonym stanie. Podczas zwrotu towar nie może zostać zniszczony w skutek nieodpowiedniego pakowania lub transportu. Okres gwarancji na naprawione części trwa od 6 miesięcy do 4 miesięcy na zreperowane amortyzatory, a większość innych części w przypadku wad materiału oraz wykonania są objęte gwarancją oryginalnego producenta lub Anglo Parts na okres jednego roku od daty wystawienia faktury.

ZWROTYJeśli otrzymałeś niewłaściwy towar, przez popełnienie błędu podczas składania zamówienia, przyjmiemy taki produkt zwracając wartość produktu po odjęciu 15% w ramach opłaty za ponowne przyjęcie towaru do magazynu. Nie przyjmujemy żadnych reklamacji: bez dostarczenia faktury otrzymanej przez Klienta, po upływie 30 dni od daty wystawienia faktury, dotyczących łożysk, tłoków, pierścieni tłokowych towarów sprzedawanych na metr, części wykładziny ( dachów składanych miękkich, pokryw przedziału pasażerskiego, zestawów do foteli itp.) książek oraz żadnych części, które próbowano zainstalować. Towary muszą być zwrócone po uprzednim pokryciu kosztów transportu i podatków. Anglo Parts nie jest w stanie zwrócić kwoty podatków obowiązujących w kraju, do którego został dostarczony towar, kosztów przesyłki lub opakowania oraz prowizji, zapłaconej przez nas firmie obsługującej karty kredytowe. Możesz wykorzystać wartość tej noty kredytowej w przyszłości, przy innym zamówieniu na tę samą wartość. Nie zwracamy wartości noty kredytowej.

OPŁATY DODATKOWE - DEPOZYTY RDZENNEDodatkowa opłata zostanie dodana do ceny części oferowanych w ramach zamiany. Kwota opłaty dodatkowej jest dostępna na stronie internetowej w katalogowym spisie części oraz jest wymieniona w cenniku obok numeru odpowiedniej części i będzie umieszczona na fakturze po otrzymaniu starej części nadającej się do naprawy. Opłata dodatkowa zostanie zwrócona w całości pod warunkiem otrzymania części kompletnej, czystej, oczyszczonej z oleju oraz zwróconej w ciągu dwóch miesięcy od daty wystawienia faktury. Prosimy również o dostarczenie kopii naszej faktury. Wszelkie zwroty muszą zostać wysłane po uprzednim pokryciu wszystkich kosztów przesyłki. Jeśli eksportujesz do nas stary produkt, prosimy o wysłanie listu zawierającego imię, adres, numer telefonu, datę wysyłki oraz opis produktów, które zwracasz, wraz z wartością opłaty dodatkowej. Prosimy o wykonanie kilku kopii, a następnie przyklejenie jednej na paczce, umieszczenie jednej w środku opakowania oraz zatrzymanie jednej kopii. Ta informacja będzie nam potrzebna przy importowaniu towaru. Od razu po otrzymaniu towaru, sprawdzimy następujące rzeczy: czy towar jest należycie zapakowany oraz czy nie nastąpiło żadne uszkodzenie w czasie transportu, czy stary produkt jest podobny do produktu wysłanego do Klienta (właściwego oryginału), czy produkt jest kompletny oraz czy jego podstawowe części nadają się do naprawy. Prosimy nie przesyłać do wymiany silnika elektrycznego wycieraczki MGA w celu zamiany na silnik elektryczny wycieraczki TD ani dystrybutora bez aparatu zapłonowego bez zaawansowanego systemu. W drugim przypadku, zwrócimy opłatę dodatkową za aparat zapłonowy pomniejszoną o wartość (według naszego uznania) zaawansowanego systemu.

Page 73: FOR BEST RESULTS DO NOT - Anglo Parts · PDF fileFOR BEST RESULTS DO NOT PRINT THIS PAGE! This page will interfere with the correct page order when printing recto-verso. Quality Parts

70© Van Geste l B&C 2013Quality Par ts & Service

MGF 1996-2002 & MGTF 2002-2005

Viktig informationenVIKTIGT ATT VETA

Företagets allmänna policy står skrivet på baksidan av våra fakturor och på vår hemsida. Uppdateringar finns i de senaste katalogerna, och våra senaste prislistor hittar ni på hemsidan. När du beställer varor från oss accepterar du vår policy. Var inte rädd för att fråga efter en uppdaterad publikation. Den senaste upplagan är den giltiga upplagan. Vänligen läs våra viktigaste punkter nedan.

VÅRA FÖRSÄLJAREVi är inte professionella biltekniker och kan inte hållas ansvariga för fel vi säger eller skriver; vi är bilentusiaster som vill vara behjälpliga. För teknisk information rekommenderar vi att du använder någon av böckerna som står med i denna katalog.

VÅR KATALOG/HEMSIDAVi eftersträvar att informationen i våra kataloger och på vår hemsida ska vara så korrekt som möjligt. Vi kan inte hållas ansvariga för misstag eller felaktigheter i specifikation, prislista eller artikelnummer. Vi har rätt att rätta till felaktigheter. Bilderna och fotona i vår katalog och på vår hemsida är endast exempelbilder, beställda produkter kan skilja sig utseendemässigt från bilden, men har samma funktionsduglighet och motsvarande kvalitet.

VÅRA RESERVDELSNUMMER & PRISERVi har egna artikelnummer till våra reservdelar, unika artikelnummer som gäller för en artikel. ÖNSKAT ANTAL (”QTY”) anger antalet delar som behövs för en speciell tillämpning. Mängden du beställer kan vara en annan och ska anges när du beställer. Det är möjligt att beställa begagnade reservdelar om de inte går att få tag i nya. Det är inte alltid de begagnade reservdelarna finns med i prislistan eller på hemsidan. Vi skickar prisuppgift vid efterfrågan. Priser i prislistan och på hemsidan gäller för en artikel. Priserna kan komma att ändras utan förvarning. Du kan välja att se priserna på hemsidan med eller utan moms (21%). Prislistan som följer med katalogen kan exkludera eller inkludera moms, procentdelen står med i respektive prislista. Ett artikelnummer består av 6 tecken. De tre första tecknen anger vilken typ av reservdel som avses. Några exempel: 161 betyder mutter, 162 skruv, 163 bricka etc. Skicket på artikeln vi säljer står beskrivet på hemsidan och i prislistan. Följande koder kan stå vid artikelnumret på hemsidan eller i listan i reservdelskatalogen samt i prislistan som medföljer katalogen: SH – begagnad, EX – utbytesdel (en tilläggsavgift tillkommer och läggs till på fakturan), NA – ej tillgänglig för tillfället., LH – vänster, RH – höger (alltid från förarens sida), LHD – vänsterstyrd, RHD – högerstyrd, A/R – efter behov (betyder att antalet kan variera beroende på användningsområde) USE – artikelnumret har ersatts av annat anvisat artikelnummer.

BESTÄLLNINGARDet går bra att beställa via hemsidan, e-post, fax, telefon eller genom att besöka en av Anglo Parts filialer. Vid order som inte görs via hemsidan ber vi dig förbereda följande, genom att använda vårt BESTÄLLNINGSFORMULÄR. - Ditt KUNDNUMMER, namn, adress, telefonnummer arbete/hem, faxnummer, momsregistreringsnummer. Ange om leveransadress skiljer sig från fakturaadress. - INFORMATION OM BILEN – märke, modell, årsmodell etc. - Ange Anglo Parts artikelnummer - Ange önskat antal och en beskrivning av reservdelen - Ange hur du kommer att betala för varorna: VISA, MASTER CARD, EURO CARD eller genom förskottsinbetalning via bank - När en order är gjord lägger vi in uppgifterna i vårt datasystem och därefter behandlas uppgifterna. Att ändra en order som redan är under behandling kommer försena beställningen. Vi ber dig därför att kontrollera din beställning mer än en gång innan du skickar den till oss då det hjälper oss att leverera varorna i tid. Tack för visad förståelse.

BETALNINGBETALKORT: I skrivande stund accepterar vi följande betalkort: VISA, MASTER CARD, EURO CARD. Bifoga kortnummer (vanligtvis 16 siffror), giltighetstid och namnet på kortet. BANK: När dina varor är hopplockade, packade och vägda skriver vi fakturan och informerar dig om total kostnad, fakturanummer och vårt bankkonto. Var snäll och ange fakturanummer och kundnummer på inbetalningen.

FRAKTNATIONELLT: Vi levererar dörr till dörr. Varor inklusive transportkostnader måste betalas vid leverans, om inte betalkort har använts.INTERNATIONELLT: För betalning av små paket använder vi oss av UPS förhandsbetalning. Enda kostnad som tillkommer är eventuell skatt i egna landet. Till stora och tunga paket använder vi en ekonomisk och snabb transportmetod. ANGLO PARTS paketerar varorna väl och risken för att motta skadat gods är väldigt liten, notera dock följande: Anglo Parts kan inte hållas ansvariga för gods som försvunnit eller skadats under transporten. Om gods saknas eller är skadat och det ej är tillfogat under transporten/frakten ska reklamation vara inlämnat senast tre dagar efter varorna mottagits. Allt förpackningsmaterial ska behållas. Glas som fraktas går inte att försäkra och transporteras på egen risk.

LEVERANS AV GODSVar vänlig kontrollera att inga förseglingar är brutna eller att varorna inte är skadade när ditt gods levereras. Anteckna på budets fraktsedel om något saknas eller är skadat. Skriv upp antalet och skicket på varorna INNAN du skriver på fraktfakturan eller följesedeln. Behåll din kopia tillsammans med fakturan och skicka din anmälan om skada till transportfirman omedelbart. Spara alltid förpackningsmaterialet tills allt är utrett. Anglo Parts kontrollerar alltid varorna både när de plockas från hyllan och när de paketeras, men en sista kontroll måste alltid genomföras av kunden själv vid leverans. Kontrollera att reservdelarna stämmer överens med det du beställt och att mekaniska delar fungerar. Vänta inte med att kontrollera varorna tills du behöver dem utan rapportera eventuella fel senast tre dagar efter leverans.

GARANTINästan alla reservdelar som görs till klassiska bilar tillverkas av företag som är villiga att tillverka i mindre antal för ett rimligt pris. På Anglo Parts kontrollerar och godkänner vi varorna, men vi kan inte inspektera varje individuell artikel. Det är kundens ansvar att göra en slutgiltig inspektion av reservdelen innan den monteras. Det är extra viktigt att kontrollera att mekaniska delar fungerar som de ska. Garantin gäller från det datum fakturan skrevs ut, inte från det datum reservdelen monteras. Våra reservdelar har normala och skäliga garantitider, men en fordran är begränsad till komponentens/varans/reservdelens värde och täcker inte arbetskostnader, transportkostnader, fel på besläktade reservdelar, fel som orsakats av felaktig installation eller delar som används till rally eller annan tävling. Varan som fordran gäller måste lämnas tillbaka till butiken du köpte den från enligt följande procedur: Värdet måste överstiga 7,5 Euro, varorna måste skickas tillbaka och skatt samt transportkostnad ska vara betald, delarna måste returneras rena och väl paketerade; så fort du eller tredje part har nermonterat reservdelen fråntas Anglo Parts ansvar. Anglo Parts beslutar om varan var defekt från början eller om det beror på felaktig montering och hantering. Vi gör en utredning när varan skickats tillbaka till oss i oskadat skick. Varan ska inte skadas vid returen pga. dålig paketering eller transport. Garantin för renoverade reservdelar är begränsad till sex månader, fyra månader för renoverade stötdämpare, för de flesta andra reservdelar gäller garantin i ett år från det datum fakturan skrevs ut och gäller då defekter i material och produktion/utförande av producenten eller av Anglo Parts N.V.

RETURER/REKLAMATIONEROm du beställt fel vara av misstag kan vi återköpa varan för varans värde minus 15% för att återinföra den i våra hyllor. Vi accepterar inga returer utan en faktura och senast 30 dagar efter det att fakturan skrevs ut; gäller: bärlager, kolvringar, detaljer på metervara, inredning (sufflett, sittbrunnskapell, stolsklädsel, paneler etc.) böcker eller delar där montering har påbörjats Varorna måste returneras med betald transport och skatt. Anglo Parts kan ej återbetala skatt som betalats i mottagande land, transport- och paketeringskostnad eller avgift för bankkostnad för betalkort. Du kan använda summan på tillgodokvittot till att betala en framtida order för motsvarande summa. Vi ger ej pengarna tillbaka för ett tillgodokvitto.

TILLÄGGSAVGIFT/STOMAVGIFTStomavgift tillkommer på priset för varor som erbjuds som utbytesdetaljer. Stomavgiften syns i katalogens prislista på hemsidan vid respektive artikelnummer och faktureras i väntan på den gamla reservdelen som skickas in som inbyte. Stomavgiften betalas tillbaka när vi fått inbytesdelen, förutsatt att varan är komplett, ren, tömd på olja och skickad till oss inom en tidsperiod av två månader efter det att vi skickat ut fakturan. Var vänlig bifoga en kopia på fakturan. Alla inbytesdelar måste skickas till oss med betald frakt. När du exporterar den gamla varan till oss måste ett brev med följande uppgifter skickas till oss: ditt namn, adress, telefonnummer, datum varorna skickades, en beskrivning av varorna du skickar samt stomavgiften. Ta kopior och sätt en på paketet, lägg en inuti paketet och behåll en kopia själv. Vi behöver ovanstående information för att kunna importera varorna. När inbytesdelen levererats till oss kontrollerar vi omedelbart: att varan är väl paketerad och att inga skador tillkommit under transporten, om den gamla reservdelen motsvarar den vara vi skickat till dig (original), om varan är komplett och om det går att bygga om/rekonditionera väsentliga delar. Vi ber dig att inte skicka en torkarmotor från en MGA som utbyte mot en torkarmotor till en TD. Skicka inte en strömfördelare utan vakuumenhet. I det senare exemplet kommer vi ta en ersättning ur stomavgiften för strömfördelaren minus värdet för vakuumenheten.

RESTORDRAR Varor som inte finns på lager när du lägger din beställning överförs till en restorder. Vi informerar dig när varorna finns tillgängliga igen och reserverar dem åt dig under fjorton dagar, räknat från den dag du informerades om att varorna kommit in. Om du inte kontaktar oss under denna period överförs varorna till vårt lager och kan beställas av andra kunder. När du beställer kan du även välja ”Inga restordrar” eller be om att annullera alla tidigare restordrar. När en vara som ligger som restorder tas ur sortimentet informerar vi dig även om detta. Om du då vill ha ett begagnat exemplar av varan meddelar du oss detta, så gör vi vårt bästa för att få fram ett sådant.

Page 74: FOR BEST RESULTS DO NOT - Anglo Parts · PDF fileFOR BEST RESULTS DO NOT PRINT THIS PAGE! This page will interfere with the correct page order when printing recto-verso. Quality Parts

71© Van Geste l B&C 2013 Quality Par ts & Service

ANGLO PARTS FAX ORDERFORM

Quantity Part n° Page n° Illustr. n° Description

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

Client n° : Date :

Name : Shipping address if different :

Address :

Country : Country :

Telephone :

Fax :

To be shipped Will be collected Backorders, parts not in stock or available at this moment/ required or not

Q u a l i t y P a r t s & S e r v i c e

Payment : Visa Euro-card - Master card - Access

Card n°. :

Exp. date : badge code : Signature :

Model : Year :Chassis n° :Engine n° :

Fax numbersBELGIUM Fax +32 15 42 34 45 • NETHERLANDS, BOVEN-LEEUWEN Fax +31 318-551395ITALY Fax +39 0422 321 470 • GERMANY Fax +49 6441 781336 • FRANCE Fax +33 328 26 83 73 NETHERLANDS, GRUBBENVORST Fax +31 318-551395 • SPAIN Fax +34 93 225 27 91LUXEMBOURG Fax +352 518151-820 • HUNGARY Fax +36 1 254 08 08CZECH & SLOVAK REPUBLIC Fax: +42(0) 383 382 161

MGF 1996-2002 & MGTF 2002-2005

Orderform

Page 75: FOR BEST RESULTS DO NOT - Anglo Parts · PDF fileFOR BEST RESULTS DO NOT PRINT THIS PAGE! This page will interfere with the correct page order when printing recto-verso. Quality Parts

72© Van Geste l B&C 2013Quality Par ts & Service

MGF 1996-2002 & MGTF 2002-2005

Notes

Page 76: FOR BEST RESULTS DO NOT - Anglo Parts · PDF fileFOR BEST RESULTS DO NOT PRINT THIS PAGE! This page will interfere with the correct page order when printing recto-verso. Quality Parts

© A n g l o P a r t s n v 2 0 1 6 Q u a l i t y P a r t s & S e r v i c e

DOWNLOAD OUR OTHER ANGLO PARTS & ACCESSORIES CATALOGUES FOR FREE!d o w n l o a d t h e p d f v e r s i o n s o f o u r c a t a l o g u e s f o r f r e e a t w w w. a n g l o p a r t s . c o m o r b u y t h e m f o r 1 0 e u r o s p e r i t e m .

Triumph TR2-4Apart n° 190.243

Triumph Spitfirepart n° 190.133

Triumph TR5-250-6part n° 190.273

Mini 1969-2000part n° 190.720

Morris Minorpart n° 190.718

Land Rover Defender 90-110 1984-2006

part n° 190.779

A.H. 100/4-3000part n° 190.509

Sprite-Midget 1965-’80 part n° 190.518

Sprite-Midget 1958-’64 part n° 190.504

Triumph GT6part n° 190.863

Jaguar XJ, Series I, II, IIIpart n° 190.780 British Parts, Tools & Accessories

part n° 190.058

Jaguar XK120-150part n° 190.694

Jaguar MKII-Daimler V8part n° 190.721

Jaguar E-typepart n° 190.695

MGTC part n° 190.275

MGTD-TF part n° 190.067

MGA part n° 190.001 MGB

part n° 190.002

MGCpart n° 190.158

MGF-TF 1996-2005part n° 190.519

Page 77: FOR BEST RESULTS DO NOT - Anglo Parts · PDF fileFOR BEST RESULTS DO NOT PRINT THIS PAGE! This page will interfere with the correct page order when printing recto-verso. Quality Parts

www.angloparts.complease visit our website for all contact information

Anglo Parts ShopsMAIN BRANCH BELGIUMNETHERLANDS • ITALY • GERMANY

Authorized Anglo Parts DealersFRANCE • NETHERLANDS • SPAINSWEDEN • FINLAND • SWITZERLANDCZECH REPUBLIC • SLOVAKIALUXEMBOURG • POLAND • HUNGARY

F o u r t h E d i t i o n • 19 0 . 5 1 9 Q u a l i t y P a r t s & S e r v i c e

MGF-TF 1996-2005PARTS & ACCESSORIES CATALOGUE